You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@tomcat.apache.org by Leo Donahue - PLANDEVX <Le...@mail.maricopa.gov> on 2010/03/08 22:11:50 UTC
JNDI Realm question
http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionURL="ldap://localhost:389"
userPattern="uid={0},ou=people,dc=mycompany,dc=com"
roleBase="ou=groups,dc=mycompany,dc=com"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
The way Active Directory is setup for us looks something like this:
dc=mycompany,dc=com
ou=mydept
ou=division1
ou=division2
ou=division...n
ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
ou=other depts, etc.
I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionURL="ldap://localhost:389"
connectionName="tomcat user account name"
connectionPassword="tomcat user account pw"
userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
roleBase="ou=mydept,dc=mycompany,dc=com"
roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
roleSearch="(uniqueMember={0})"
userSubtree="true"
/>
Leo Donahue
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
RE: JNDI Realm question
Posted by Leo Donahue - PLANDEVX <Le...@mail.maricopa.gov>.
And thank you everyone for your help!
-----Original Message-----
From: Leo Donahue - PLANDEVX [mailto:LeoDonahue@mail.maricopa.gov]
Sent: Tuesday, March 09, 2010 3:18 PM
To: 'Tomcat Users List'
Subject: RE: JNDI Realm question
Ok, it's working. I changed too many things at once, so I'm not sure which one fixed it. I shouldn't have done that, but I can't spend too much time on this, 3 days already.
I changed server.xml to this:
<!-- This Realm uses Active Directory -->
<Realm className="org.apache.catalina.realm.JNDIRealm"
connectionURL="ldap://servername.plandev.maricopa.gov:389"
connectionName="CN=username,OU=Service Accounts,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
connectionPassword="password"
roleBase="OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
roleSubtree="true"
roleName="cn"
roleSearch="(member={0})"
userBase="OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
userSearch="(&(objectCategory=person)(sAMAccountName={0}))"
userSubtree="true"
userRoleName="memberOf"
/>
I also changed the realm-name web.xml:
<!-- SECURITY CONSTRAINT -->
<security-constraint>
<web-resource-collection>
<web-resource-name>samplewebapp</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>arcgisserver_reader</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<!-- LOGIN CONFIGURATION-->
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>JNDIRealm</realm-name>
</login-config>
<!-- Security roles referenced by this web application -->
<security-role>
<role-name>arcgisserver_reader</role-name>
</security-role>
Now when I navigate to http://servername:8080/sample I accept the certificate, enter my windows login and password, and then I'm taken to the https://servername:8080/sample welcome page.
I don't have a lock icon which bothers me, but that is IE7 for you. The address bar is pink. What can I tell you. Firefox gives me a lock icon.
-----Original Message-----
From: Leo Donahue - PLANDEVX [mailto:LeoDonahue@mail.maricopa.gov]
Sent: Tuesday, March 09, 2010 2:25 PM
To: 'Tomcat Users List'
Subject: RE: JNDI Realm question
I downloaded the Apache Directory Tool. Very nice. Much better than the ldap browser tool I was using.
I was able to create a search using the Filter Editor, of the Apache Directory Tool, that returns sAMAccounts that I wanted.
The filter:
(&
(objectCategory=person)
(sAMAccountName=*)
(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov)
)
This query returns the three user accounts with the role "arcgisserver_reader", which is right.
I think my issue is that I don't understand what I'm supposed to be supplying in the JNDI Realm, among other things. The examples I saw in the Tomcat docs use something similar to what I have below, but I don't understand the purpose roleSearch attribute. How does it know that I want to use the role "arcgisserver_reader" when it has a parameter? It plugs in the role specified in the web.xml? I know roleSearch is the filter expression for performing role searches, but is that what I'm doing? I want to search for any user that belongs to a specific role - that's what I'm attempting anyway.
This is what I have in server.xml:
<!-- This Realm uses Active Directory -->
<Realm className="org.apache.catalina.realm.JNDIRealm"
digest="md5"
connectionURL="ldap://servername.plandev.maricopa.gov:389"
connectionName="username"
connectionPassword="password"
userSearch="(&(objectCategory=person)(sAMAccountName={0})(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov))"
userBase="OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
userSubtree="true"
roleBase="OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
This is what I have in my webapp's web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<!-- SECURITY CONSTRAINT -->
<security-constraint>
<web-resource-collection>
<web-resource-name>samplewebapp</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>arcgisserver_reader</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<!-- LOGIN CONFIGURATION-->
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Sample</realm-name>
</login-config>
<!-- Security roles referenced by this web application -->
<security-role>
<role-name>arcgisserver_reader</role-name>
</security-role>
</web-app>
This is my faces-config.xml:
<?xml version='1.0' encoding='UTF-8'?>
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<managed-bean>
<managed-bean-name>sampleModelBean</managed-bean-name>
<managed-bean-class>gov.maricopa.rdsa.gis.SampleModelBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
The sample JSF page is really nothing, just a checkbox and a button for the sake of having something on the page and testing an valueChangedListener.
When I browse to http://servername:8080/sample (this webapp has a index.jsp that forwards to welcome.jsp)
I get the self signed certificate warning. I continue, then the Tomcat prompts for username/password. I supply my login name without the domain part, Tomcat then tells me I am denied using my windows login.
This tells me I don't have this quite right just yet. HTTP Status 403 is the result and the URL changed to https://servername:8443/sample/
The logs are empty until I stop Tomcat. After stopping Tomcat, catalina log now shows this exception. Is that my problem or is my query still not right?
Mar 9, 2010 2:05:50 PM org.apache.catalina.realm.JNDIRealm authenticate
SEVERE: Exception performing authentication
javax.naming.directory.InvalidSearchFilterException: invalid escape sequence: [B@1dd8136; remaining name 'OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov'
at com.sun.jndi.ldap.Filter.unescapeFilterValue(Filter.java:216)
-----Original Message-----
From: Stefan Zoerner [mailto:stefan@labeo.de]
Sent: Tuesday, March 09, 2010 6:43 AM
To: Tomcat Users List
Subject: Re: JNDI Realm question
Hi Leo,
in general I would recommend to use an LDAP tool like Apache Directory Studio in order to develop and verify the JNDI Realm specific parameters.
http://directory.apache.org/studio/
If this works (authentication, authorization searches), add the parameters to your tomcat configuration in server.xml
The userPattern attribute is in almost all cases not appropriate for Active Directory (AD), because the users are not organized flat in the tree there (check with a tool). Use a search filter instead as Felix suggested.
userSearch="(&(objectCategory=user)(sAMAccountName={0}))"
Adding objectCategory to the search filter will lead to better performance, because it has an index in AD.
Greetings from Hamburg,
StefanZ
Leo Donahue - PLANDEVX wrote:
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm
> <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
RE: JNDI Realm question
Posted by Leo Donahue - PLANDEVX <Le...@mail.maricopa.gov>.
Ok, it's working. I changed too many things at once, so I'm not sure which one fixed it. I shouldn't have done that, but I can't spend too much time on this, 3 days already.
I changed server.xml to this:
<!-- This Realm uses Active Directory -->
<Realm className="org.apache.catalina.realm.JNDIRealm"
connectionURL="ldap://servername.plandev.maricopa.gov:389"
connectionName="CN=username,OU=Service Accounts,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
connectionPassword="password"
roleBase="OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
roleSubtree="true"
roleName="cn"
roleSearch="(member={0})"
userBase="OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
userSearch="(&(objectCategory=person)(sAMAccountName={0}))"
userSubtree="true"
userRoleName="memberOf"
/>
I also changed the realm-name web.xml:
<!-- SECURITY CONSTRAINT -->
<security-constraint>
<web-resource-collection>
<web-resource-name>samplewebapp</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>arcgisserver_reader</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<!-- LOGIN CONFIGURATION-->
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>JNDIRealm</realm-name>
</login-config>
<!-- Security roles referenced by this web application -->
<security-role>
<role-name>arcgisserver_reader</role-name>
</security-role>
Now when I navigate to http://servername:8080/sample I accept the certificate, enter my windows login and password, and then I'm taken to the https://servername:8080/sample welcome page.
I don't have a lock icon which bothers me, but that is IE7 for you. The address bar is pink. What can I tell you. Firefox gives me a lock icon.
-----Original Message-----
From: Leo Donahue - PLANDEVX [mailto:LeoDonahue@mail.maricopa.gov]
Sent: Tuesday, March 09, 2010 2:25 PM
To: 'Tomcat Users List'
Subject: RE: JNDI Realm question
I downloaded the Apache Directory Tool. Very nice. Much better than the ldap browser tool I was using.
I was able to create a search using the Filter Editor, of the Apache Directory Tool, that returns sAMAccounts that I wanted.
The filter:
(&
(objectCategory=person)
(sAMAccountName=*)
(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov)
)
This query returns the three user accounts with the role "arcgisserver_reader", which is right.
I think my issue is that I don't understand what I'm supposed to be supplying in the JNDI Realm, among other things. The examples I saw in the Tomcat docs use something similar to what I have below, but I don't understand the purpose roleSearch attribute. How does it know that I want to use the role "arcgisserver_reader" when it has a parameter? It plugs in the role specified in the web.xml? I know roleSearch is the filter expression for performing role searches, but is that what I'm doing? I want to search for any user that belongs to a specific role - that's what I'm attempting anyway.
This is what I have in server.xml:
<!-- This Realm uses Active Directory -->
<Realm className="org.apache.catalina.realm.JNDIRealm"
digest="md5"
connectionURL="ldap://servername.plandev.maricopa.gov:389"
connectionName="username"
connectionPassword="password"
userSearch="(&(objectCategory=person)(sAMAccountName={0})(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov))"
userBase="OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
userSubtree="true"
roleBase="OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
This is what I have in my webapp's web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<!-- SECURITY CONSTRAINT -->
<security-constraint>
<web-resource-collection>
<web-resource-name>samplewebapp</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>arcgisserver_reader</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<!-- LOGIN CONFIGURATION-->
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Sample</realm-name>
</login-config>
<!-- Security roles referenced by this web application -->
<security-role>
<role-name>arcgisserver_reader</role-name>
</security-role>
</web-app>
This is my faces-config.xml:
<?xml version='1.0' encoding='UTF-8'?>
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<managed-bean>
<managed-bean-name>sampleModelBean</managed-bean-name>
<managed-bean-class>gov.maricopa.rdsa.gis.SampleModelBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
The sample JSF page is really nothing, just a checkbox and a button for the sake of having something on the page and testing an valueChangedListener.
When I browse to http://servername:8080/sample (this webapp has a index.jsp that forwards to welcome.jsp)
I get the self signed certificate warning. I continue, then the Tomcat prompts for username/password. I supply my login name without the domain part, Tomcat then tells me I am denied using my windows login.
This tells me I don't have this quite right just yet. HTTP Status 403 is the result and the URL changed to https://servername:8443/sample/
The logs are empty until I stop Tomcat. After stopping Tomcat, catalina log now shows this exception. Is that my problem or is my query still not right?
Mar 9, 2010 2:05:50 PM org.apache.catalina.realm.JNDIRealm authenticate
SEVERE: Exception performing authentication
javax.naming.directory.InvalidSearchFilterException: invalid escape sequence: [B@1dd8136; remaining name 'OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov'
at com.sun.jndi.ldap.Filter.unescapeFilterValue(Filter.java:216)
-----Original Message-----
From: Stefan Zoerner [mailto:stefan@labeo.de]
Sent: Tuesday, March 09, 2010 6:43 AM
To: Tomcat Users List
Subject: Re: JNDI Realm question
Hi Leo,
in general I would recommend to use an LDAP tool like Apache Directory Studio in order to develop and verify the JNDI Realm specific parameters.
http://directory.apache.org/studio/
If this works (authentication, authorization searches), add the parameters to your tomcat configuration in server.xml
The userPattern attribute is in almost all cases not appropriate for Active Directory (AD), because the users are not organized flat in the tree there (check with a tool). Use a search filter instead as Felix suggested.
userSearch="(&(objectCategory=user)(sAMAccountName={0}))"
Adding objectCategory to the search filter will lead to better performance, because it has an index in AD.
Greetings from Hamburg,
StefanZ
Leo Donahue - PLANDEVX wrote:
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm
> <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
RE: JNDI Realm question
Posted by Leo Donahue - PLANDEVX <Le...@mail.maricopa.gov>.
I downloaded the Apache Directory Tool. Very nice. Much better than the ldap browser tool I was using.
I was able to create a search using the Filter Editor, of the Apache Directory Tool, that returns sAMAccounts that I wanted.
The filter:
(&
(objectCategory=person)
(sAMAccountName=*)
(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov)
)
This query returns the three user accounts with the role "arcgisserver_reader", which is right.
I think my issue is that I don't understand what I'm supposed to be supplying in the JNDI Realm, among other things. The examples I saw in the Tomcat docs use something similar to what I have below, but I don't understand the purpose roleSearch attribute. How does it know that I want to use the role "arcgisserver_reader" when it has a parameter? It plugs in the role specified in the web.xml? I know roleSearch is the filter expression for performing role searches, but is that what I'm doing? I want to search for any user that belongs to a specific role - that's what I'm attempting anyway.
This is what I have in server.xml:
<!-- This Realm uses Active Directory -->
<Realm className="org.apache.catalina.realm.JNDIRealm"
digest="md5"
connectionURL="ldap://servername.plandev.maricopa.gov:389"
connectionName="username"
connectionPassword="password"
userSearch="(&(objectCategory=person)(sAMAccountName={0})(memberOf=CN=arcgisserver_reader,OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov))"
userBase="OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
userSubtree="true"
roleBase="OU=Groups,OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
This is what I have in my webapp's web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<!-- SECURITY CONSTRAINT -->
<security-constraint>
<web-resource-collection>
<web-resource-name>samplewebapp</web-resource-name>
<url-pattern>*.jsp</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>arcgisserver_reader</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<!-- LOGIN CONFIGURATION-->
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Sample</realm-name>
</login-config>
<!-- Security roles referenced by this web application -->
<security-role>
<role-name>arcgisserver_reader</role-name>
</security-role>
</web-app>
This is my faces-config.xml:
<?xml version='1.0' encoding='UTF-8'?>
<!-- =========== FULL CONFIGURATION FILE ================================== -->
<faces-config version="1.2"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<managed-bean>
<managed-bean-name>sampleModelBean</managed-bean-name>
<managed-bean-class>gov.maricopa.rdsa.gis.SampleModelBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
The sample JSF page is really nothing, just a checkbox and a button for the sake of having something on the page and testing an valueChangedListener.
When I browse to http://servername:8080/sample (this webapp has a index.jsp that forwards to welcome.jsp)
I get the self signed certificate warning. I continue, then the Tomcat prompts for username/password. I supply my login name without the domain part, Tomcat then tells me I am denied using my windows login.
This tells me I don't have this quite right just yet. HTTP Status 403 is the result and the URL changed to https://servername:8443/sample/
The logs are empty until I stop Tomcat. After stopping Tomcat, catalina log now shows this exception. Is that my problem or is my query still not right?
Mar 9, 2010 2:05:50 PM org.apache.catalina.realm.JNDIRealm authenticate
SEVERE: Exception performing authentication
javax.naming.directory.InvalidSearchFilterException: invalid escape sequence: [B@1dd8136; remaining name 'OU=PLANDEV Dept,DC=plandev,DC=maricopa,DC=gov'
at com.sun.jndi.ldap.Filter.unescapeFilterValue(Filter.java:216)
-----Original Message-----
From: Stefan Zoerner [mailto:stefan@labeo.de]
Sent: Tuesday, March 09, 2010 6:43 AM
To: Tomcat Users List
Subject: Re: JNDI Realm question
Hi Leo,
in general I would recommend to use an LDAP tool like Apache Directory Studio in order to develop and verify the JNDI Realm specific parameters.
http://directory.apache.org/studio/
If this works (authentication, authorization searches), add the parameters to your tomcat configuration in server.xml
The userPattern attribute is in almost all cases not appropriate for Active Directory (AD), because the users are not organized flat in the tree there (check with a tool). Use a search filter instead as Felix suggested.
userSearch="(&(objectCategory=user)(sAMAccountName={0}))"
Adding objectCategory to the search filter will lead to better performance, because it has an index in AD.
Greetings from Hamburg,
StefanZ
Leo Donahue - PLANDEVX wrote:
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm
> <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
Re: JNDI Realm question
Posted by Stefan Zoerner <st...@labeo.de>.
Hi Leo,
in general I would recommend to use an LDAP tool like Apache Directory
Studio in order to develop and verify the JNDI Realm specific parameters.
http://directory.apache.org/studio/
If this works (authentication, authorization searches), add the
parameters to your tomcat configuration in server.xml
The userPattern attribute is in almost all cases not appropriate for
Active Directory (AD), because the users are not organized flat in the
tree there (check with a tool). Use a search filter instead as Felix
suggested.
userSearch="(&(objectCategory=user)(sAMAccountName={0}))"
Adding objectCategory to the search filter will lead to better
performance, because it has an index in AD.
Greetings from Hamburg,
StefanZ
Leo Donahue - PLANDEVX wrote:
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
Re: JNDI Realm question
Posted by Felix Schumacher <fe...@internetallee.de>.
Hi Leo,
On Mon, 8 Mar 2010 14:11:50 -0700, Leo Donahue - PLANDEVX
<Le...@mail.maricopa.gov> wrote:
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm
> <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for
> userPattern the same as the "sAMAccountName" ?
"uid" is just an attribute like "sAMAccounName". So if your userid's are
represented by "sAMAccountName" you can use it.
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat
> user, if required. That is the account Tomcat uses to browse the LDAP, I
> understand that, but where is it used in the Realm? Is it the
> connectionName and connectionPassword attributes?
Yes, those two attributes are used to tell the realm to bind to the
server.
This is needed if you don't have anonymous access enabled in your LDAP
server.
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user
account,
> and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under
> "mydept" will be found. Does this look right? (aside from changing the
> connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
I think you will want to try
userSearch="sAMAccountName={0}"
userBase="ou=mydept,dc=mycompany,dc=com"
userSubtree="true"
instead of "userPattern=...". Using this JNDIRealm will do a subtree
search with
"ou=mydept,dc=mycompany,dc=com" as base and "sAMAccountName=USERNAME" as
filter.
Minor note: I think, that if you have a relatively new tomcat than the
debug="99"
statement will be ignored.
Bye
Felix
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
RE: JNDI Realm question
Posted by Martin Gainty <mg...@hotmail.com>.
Good Afternoon Leo
i would suggest using wildcard searches using the objectclass,cn,objectcategory or sn as specified here
http://msdn.microsoft.com/en-us/library/aa746475(VS.85).aspx
once you have a valid LDAP query then confgure the tc realm
Note: i would suggest using LDAP_MATCHING_RULE_IN_CHAIN for MatchingRuleOID which allows you to pull all
the attributes that match the value for that subtree
hth
Martin Gainty
______________________________________________
do not disrupt, alter or modify this transmission.
> From: LeoDonahue@mail.maricopa.gov
> To: users@tomcat.apache.org
> Date: Mon, 8 Mar 2010 14:11:50 -0700
> Subject: JNDI Realm question
>
> http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html#JNDIRealm <http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html>
>
> Using Tomcat 6.0.24 on Windows Server 2003 Standard R2 SP2
>
> 1. We use MS Active Directory, is the "uid" in the following example for userPattern the same as the "sAMAccountName" ?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> userPattern="uid={0},ou=people,dc=mycompany,dc=com"
> roleBase="ou=groups,dc=mycompany,dc=com"
> roleName="cn"
> roleSearch="(uniqueMember={0})"
> />
>
> 2. The quick start section said to create a user account for the Tomcat user, if required. That is the account Tomcat uses to browse the LDAP, I understand that, but where is it used in the Realm? Is it the connectionName and connectionPassword attributes?
>
> The way Active Directory is setup for us looks something like this:
>
> dc=mycompany,dc=com
> ou=mydept
> ou=division1
> ou=division2
> ou=division...n
> ou=service accounts (this is where we created the tomcat user account, and the role accounts for the webapp)
> ou=other depts, etc.
>
> I would like to set up the realm so that any user in any division, under "mydept" will be found. Does this look right? (aside from changing the connection url to ours) Or do I substitue the sAMAccountName for "uid"?
>
> <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
> connectionURL="ldap://localhost:389"
> connectionName="tomcat user account name"
> connectionPassword="tomcat user account pw"
> userPattern="uid={0},ou=mydept,dc=mycompany,dc=com"
> roleBase="ou=mydept,dc=mycompany,dc=com"
> roleName="ou=service accounts,cn=ourwebapprolename,dc=mycompany,dc=com"
> roleSearch="(uniqueMember={0})"
> userSubtree="true"
> />
>
>
> Leo Donahue
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/201469230/direct/01/