You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cocoon.apache.org by David Crossley <cr...@indexgeo.com.au> on 2001/09/04 16:05:55 UTC
entity catalogs support - finalisation
Does the entity resolver start correctly for everybody?
At the default verbosity level, you should see resolver
messages going to standard output.
It would be good to finalise it so that we can add it
to the C2.0 release. The only thing that i can see holding
it up, is a success report from a Macintosh platform.
The only failure reports so far turned out to be config
mistakes.
(If you need to catch up, then see xdocs/catalog.xml
and the link to catalog sample.)
regards, David
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by "Piroumian, Konstantin" <KP...@flagship.ru>.
> Hi Konstantin, does the following file exist under tomcat home?
> webapps\cocoon\WEB-INF\classes\CatalogManager.properties
Yes, I have such file there.
> It should have been copied there by the build process and the
> path to the default catalog automatically adjusted. If not, then
> see the Build Notes in xdocs/catalog.xml
Now I get where the problem comes from: I don't use 'install' command to
build the application. I build it in the old way: build.bat ... webapp and
then copy the war file manualy to the appropriate directory.
So, I corrected the path manualy and it worked!
>
> If that was OK, then did you get any status messages going to
> stdout when accessing the demo? Also, please watch for catalog
> loader messages when Cocoon starts. and operates.
> regards, David
Regards,
Konstantin
>
> -----------------------------
> > Date: Tue, 4 Sep 2001 18:51:21 +0400
> > From: "Piroumian, Konstantin" <KP...@flagship.ru>
> > Hi!
> >
> > Just now updated my CVS and tried the entity catalog sample.
Unfortunately,
> > the problem remains. I get this error again:
> >
> > org.xml.sax.SAXParseException: File
> > "file:/D:/Java/cdk-dist/webapps/cocoon2/docs/samples/catalog/ISOnum.pen"
not
> > found.
> > at
org.apache.cocoon.components.source.URLSource.toSAX(URLSource.java:306)
> > at
> >
org.apache.cocoon.generation.FileGenerator.generate(FileGenerator.java:109)
> > at
> >
org.apache.cocoon.components.pipeline.CachingEventPipeline.process(CachingEv
> > entPipeline.java:214)
> > at
> >
org.apache.cocoon.components.pipeline.CachingStreamPipeline.process(CachingS
> > treamPipeline.java:364)
> > at
> >
org.apache.cocoon.www.sitemap_xmap.wildcardMatchN391(sitemap_xmap.java:4801)
> > ...
> >
> > As I can see the path shows to the /docs/samples/ etc. directory, but
the
> > needed file is in resources/...
> >
> > My configuration is the same:
> > WinNT 4.0
> > Tomcat 3.3-dev
> > JDK 1.3
> >
> > ----- Original Message -----
> > From: "David Crossley" <cr...@indexgeo.com.au>
> > To: <co...@xml.apache.org>
> > Sent: Tuesday, September 04, 2001 6:05 PM
> > Subject: entity catalogs support - finalisation
> >
> >
> > Does the entity resolver start correctly for everybody?
> > At the default verbosity level, you should see resolver
> > messages going to standard output.
> >
> > It would be good to finalise it so that we can add it
> > to the C2.0 release. The only thing that i can see holding
> > it up, is a success report from a Macintosh platform.
> >
> > The only failure reports so far turned out to be config
> > mistakes.
> >
> > (If you need to catch up, then see xdocs/catalog.xml
> > and the link to catalog sample.)
> >
> > regards, David
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by David Crossley <cr...@indexgeo.com.au>.
Hi Konstantin, does the following file exist under tomcat home?
webapps\cocoon\WEB-INF\classes\CatalogManager.properties
It should have been copied there by the build process and the
path to the default catalog automatically adjusted. If not, then
see the Build Notes in xdocs/catalog.xml
If that was OK, then did you get any status messages going to
stdout when accessing the demo? Also, please watch for catalog
loader messages when Cocoon starts. and operates.
regards, David
-----------------------------
> Date: Tue, 4 Sep 2001 18:51:21 +0400
> From: "Piroumian, Konstantin" <KP...@flagship.ru>
> Hi!
>
> Just now updated my CVS and tried the entity catalog sample. Unfortunately,
> the problem remains. I get this error again:
>
> org.xml.sax.SAXParseException: File
> "file:/D:/Java/cdk-dist/webapps/cocoon2/docs/samples/catalog/ISOnum.pen" not
> found.
> at org.apache.cocoon.components.source.URLSource.toSAX(URLSource.java:306)
> at
> org.apache.cocoon.generation.FileGenerator.generate(FileGenerator.java:109)
> at
> org.apache.cocoon.components.pipeline.CachingEventPipeline.process(CachingEv
> entPipeline.java:214)
> at
> org.apache.cocoon.components.pipeline.CachingStreamPipeline.process(CachingS
> treamPipeline.java:364)
> at
> org.apache.cocoon.www.sitemap_xmap.wildcardMatchN391(sitemap_xmap.java:4801)
> ...
>
> As I can see the path shows to the /docs/samples/ etc. directory, but the
> needed file is in resources/...
>
> My configuration is the same:
> WinNT 4.0
> Tomcat 3.3-dev
> JDK 1.3
>
> ----- Original Message -----
> From: "David Crossley" <cr...@indexgeo.com.au>
> To: <co...@xml.apache.org>
> Sent: Tuesday, September 04, 2001 6:05 PM
> Subject: entity catalogs support - finalisation
>
>
> Does the entity resolver start correctly for everybody?
> At the default verbosity level, you should see resolver
> messages going to standard output.
>
> It would be good to finalise it so that we can add it
> to the C2.0 release. The only thing that i can see holding
> it up, is a success report from a Macintosh platform.
>
> The only failure reports so far turned out to be config
> mistakes.
>
> (If you need to catch up, then see xdocs/catalog.xml
> and the link to catalog sample.)
>
> regards, David
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by "Piroumian, Konstantin" <KP...@flagship.ru>.
Hi!
Just now updated my CVS and tried the entity catalog sample. Unfortunately,
the problem remains. I get this error again:
org.xml.sax.SAXParseException: File
"file:/D:/Java/cdk-dist/webapps/cocoon2/docs/samples/catalog/ISOnum.pen" not
found.
at org.apache.cocoon.components.source.URLSource.toSAX(URLSource.java:306)
at
org.apache.cocoon.generation.FileGenerator.generate(FileGenerator.java:109)
at
org.apache.cocoon.components.pipeline.CachingEventPipeline.process(CachingEv
entPipeline.java:214)
at
org.apache.cocoon.components.pipeline.CachingStreamPipeline.process(CachingS
treamPipeline.java:364)
at
org.apache.cocoon.www.sitemap_xmap.wildcardMatchN391(sitemap_xmap.java:4801)
...
As I can see the path shows to the /docs/samples/ etc. directory, but the
needed file is in resources/...
My configuration is the same:
WinNT 4.0
Tomcat 3.3-dev
JDK 1.3
----- Original Message -----
From: "David Crossley" <cr...@indexgeo.com.au>
To: <co...@xml.apache.org>
Sent: Tuesday, September 04, 2001 6:05 PM
Subject: entity catalogs support - finalisation
Does the entity resolver start correctly for everybody?
At the default verbosity level, you should see resolver
messages going to standard output.
It would be good to finalise it so that we can add it
to the C2.0 release. The only thing that i can see holding
it up, is a success report from a Macintosh platform.
The only failure reports so far turned out to be config
mistakes.
(If you need to catch up, then see xdocs/catalog.xml
and the link to catalog sample.)
regards, David
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by David Crossley <cr...@indexgeo.com.au>.
Hi Jeremy, i would guess that you have the same problem
as did Konstantin. That is the expected error message when the
entity resolver has no mapping for the requested entity.
The entity resolver probably did not configure itself because it could
not find the properties file at Cocoon startup. Please see the
recent email to Konstantin on this thread.
regards, David
Jeremy Quinn said:
> With an update from CVS (about 10 mins ago) running Cocoon 2 under TomCat
> 3.3-m3 running on MacOS X 10.0.4 I get this error message, when I click on
> the link on the welcome page to test the 'Entity resolution using catalogs':
>
> org.apache.cocoon.ProcessingException: Failed to execute pipeline.:
> org.xml.sax.SAXParseException: File
>
"file:/Volumes/Tardis/Library/TomCat/webapps/cocoon/docs/samples/catalog/ISOnum.pen"
> not found.
>
> Yes, and the file is not there .....
> regards Jeremy
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: AW: entity catalogs support - finalisation
Posted by David Crossley <cr...@indexgeo.com.au>.
Hi Carsten, you should not need to set the "catalogs" property
manually. It should be automatically set by the build process
to be full pathname to webapps/cocoon/resources/entities/catalog
Did you use build -Dinstall.war=$TOMCAT_HOME/webapps
regards, David
> Date: Tue, 4 Sep 2001 17:48:49 +0200
> From: "Carsten Ziegeler" <cz...@sundn.de>
>
> Did you try to set the correct catalog path in the
> CatalogManager.properties file (in WEB-INF/classes),
> it should read something like "${install.war}/...".
> After changing this manually, it works. Without changing
> I get exactly the same error as you did.
>
> Carsten
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: AW: entity catalogs support - finalisation
Posted by Martin Man <ma...@mman.dyndns.org>.
On Tue, Sep 04, 2001 at 09:34:57AM -0700, Davanum Srinivas wrote:
> Jeremy,
>
> Please try this sequence.
>
> cd $TARDIS/Checkouts/xml-cocoon2
> ./build.sh clean
> ./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps install
Also for those who don't know it yet, to simplify the building process you can
put all these properties into .ant.properties file located in the same
directory as build.xml is, here is mine to show
---- cut .ant.properties ---
include.webapp.libs=yes
install.war=/home/martin/tmp/work/jakarta-tomcat/webapps
remove.webapp=yes
---- cut .ant.properties ---
rgds,
martin
> cd $TOMCAT_HOME/bin
> ./startup.sh
>
> Thanks,
> dims
>
> --- Jeremy Quinn <je...@media.demon.co.uk> wrote:
> > At 5:48 PM +0200 4/9/01, Carsten Ziegeler wrote:
> > >Did you try to set the correct catalog path in the
> > >CatalogManager.properties file (in WEB-INF/classes),
> > >it should read something like "${install.war}/...".
> > >After changing this manually, it works. Without changing
> > >I get exactly the same error as you did.
> > >
> > >Carsten
> >
> > I am probably confused, this is going to be a FAQ IMHO ;)
> >
> > This is what I did to build:
> >
> > cd $TARDIS/Checkouts/xml-cocoon2
> > ./build.sh clean
> > ./build.sh -Dinclude.webapp.libs=yes webapp
> > ./build.sh -Dinstall.war=$TOMCAT_HOME/webapps install
> > cd $TOMCAT_HOME/bin
> > ./startup.sh
> >
> >
> > I get the same error.
> >
> > The file :
> > '/Volumes/Tardis/Library/TomCat/webapps/cocoon/WEB-INF/classes/CatalogManager.properties'
> > line 26 still says
> > 'catalogs=${install.war}/cocoon/resources/entities/catalog'
> >
> > Am I still doing something wrong?
> >
> >
> > regards Jeremy
> >
> > --
> > ___________________________________________________________________
> >
> > Jeremy Quinn Karma Divers
> > webSpace Design
> > HyperMedia Research Centre
> >
> > <ma...@mac.com> <http://www.media.demon.co.uk>
> > <phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> > For additional commands, email: cocoon-dev-help@xml.apache.org
> >
>
>
> =====
> Davanum Srinivas, JNI-FAQ Manager
> http://www.jGuru.com/faq/JNI
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
> http://im.yahoo.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> For additional commands, email: cocoon-dev-help@xml.apache.org
>
--
-----------------------------------------------------------------------
"Only dead fish swims with a stream" Malcolm Muggeridge
gpg_key_available: http://globales.cz/~mman/martin.man.gpg
gpg_key_fingerprint: 2CC0 4AF6 92DA 5CBF 5F09 7BCB 6202 7024 6E06 0223
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
RE: AW: entity catalogs support - finalisation
Posted by Jeremy Quinn <je...@media.demon.co.uk>.
At 12:27 PM -0400 4/9/01, Vadim Gritsenko wrote:
>Jeremy,
>
>Do not combine these tasks!
>And, do not do install if you ever used build.sh without
>-Dinstall.war=$TOMCAT_HOME/webapps
>parameter!
>
>Try this:
>./build.sh clean
>./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps
>install
>
>PS Need to write clearly in doc that before install clean is required - or
>change build.xml...
>
>Vadim
Phew!
Thanks Vadim, yes it works on Mac OSX!!
Hurrah!!
Yes, it needs more carefully documenting, or simplifying in the build
scripts ;)
Thanks
regards Jeremy
--
___________________________________________________________________
Jeremy Quinn Karma Divers
webSpace Design
HyperMedia Research Centre
<ma...@mac.com> <http://www.media.demon.co.uk>
<phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
RE: AW: entity catalogs support - finalisation
Posted by Vadim Gritsenko <vg...@hns.com>.
If your ever used build without specifying install dir - then yes, it's required,
because on second run Ant will skip this step:
<copy todir="${build.war}" filtering="on">
in
<target name="copy-webapp" depends="prepare">
target, but it needs to be executed with initialized variable "install.war".
Vadim
> -----Original Message-----
> From: David Crossley [mailto:crossley@indexgeo.com.au]
> Sent: Tuesday, September 04, 2001 12:45 PM
> To: cocoon-dev@xml.apache.org
> Subject: Re: AW: entity catalogs support - finalisation
>
>
> Thanks Vadim, i was just writing the same email to Jeremy.
> However, are you sure that build clean is needed.
> I just do the one-line build command that you have shown
> and all is well.
> David
>
> Vadim wrote:
> > Jeremy,
> >
> > Do not combine these tasks!
> > And, do not do install if you ever used build.sh without
> -Dinstall.war=$TOMCAT_HOME/webapps
> > parameter!
> >
> > Try this:
> > ./build.sh clean
> > ./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps
> install
> >
> > PS Need to write clearly in doc that before install clean is required - or
> change build.xml...
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> For additional commands, email: cocoon-dev-help@xml.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: AW: entity catalogs support - finalisation
Posted by David Crossley <cr...@indexgeo.com.au>.
Thanks Vadim, i was just writing the same email to Jeremy.
However, are you sure that build clean is needed.
I just do the one-line build command that you have shown
and all is well.
David
Vadim wrote:
> Jeremy,
>
> Do not combine these tasks!
> And, do not do install if you ever used build.sh without
-Dinstall.war=$TOMCAT_HOME/webapps
> parameter!
>
> Try this:
> ./build.sh clean
> ./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps
install
>
> PS Need to write clearly in doc that before install clean is required - or
change build.xml...
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
RE: AW: entity catalogs support - finalisation
Posted by Vadim Gritsenko <vg...@hns.com>.
Jeremy,
Do not combine these tasks!
And, do not do install if you ever used build.sh without -Dinstall.war=$TOMCAT_HOME/webapps
parameter!
Try this:
./build.sh clean
./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps install
PS Need to write clearly in doc that before install clean is required - or change build.xml...
Vadim
> -----Original Message-----
> From: Jeremy Quinn [mailto:jeremy@media.demon.co.uk]
> Sent: Tuesday, September 04, 2001 12:16 PM
> To: cocoon-dev@xml.apache.org
> Subject: Re: AW: entity catalogs support - finalisation
>
>
> At 5:48 PM +0200 4/9/01, Carsten Ziegeler wrote:
> >Did you try to set the correct catalog path in the
> >CatalogManager.properties file (in WEB-INF/classes),
> >it should read something like "${install.war}/...".
> >After changing this manually, it works. Without changing
> >I get exactly the same error as you did.
> >
> >Carsten
>
> I am probably confused, this is going to be a FAQ IMHO ;)
>
> This is what I did to build:
>
> cd $TARDIS/Checkouts/xml-cocoon2
> ./build.sh clean
> ./build.sh -Dinclude.webapp.libs=yes webapp
> ./build.sh -Dinstall.war=$TOMCAT_HOME/webapps install
> cd $TOMCAT_HOME/bin
> ./startup.sh
>
>
> I get the same error.
>
> The file :
> '/Volumes/Tardis/Library/TomCat/webapps/cocoon/WEB-INF/classes/CatalogManager.properties'
> line 26 still says
> 'catalogs=${install.war}/cocoon/resources/entities/catalog'
>
> Am I still doing something wrong?
>
>
> regards Jeremy
>
> --
> ___________________________________________________________________
>
> Jeremy Quinn Karma Divers
> webSpace Design
> HyperMedia Research Centre
>
> <ma...@mac.com> <http://www.media.demon.co.uk>
> <phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> For additional commands, email: cocoon-dev-help@xml.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: AW: entity catalogs support - finalisation
Posted by Davanum Srinivas <di...@yahoo.com>.
Jeremy,
Please try this sequence.
cd $TARDIS/Checkouts/xml-cocoon2
./build.sh clean
./build.sh -Dinclude.webapp.libs=yes -Dinstall.war=$TOMCAT_HOME/webapps install
cd $TOMCAT_HOME/bin
./startup.sh
Thanks,
dims
--- Jeremy Quinn <je...@media.demon.co.uk> wrote:
> At 5:48 PM +0200 4/9/01, Carsten Ziegeler wrote:
> >Did you try to set the correct catalog path in the
> >CatalogManager.properties file (in WEB-INF/classes),
> >it should read something like "${install.war}/...".
> >After changing this manually, it works. Without changing
> >I get exactly the same error as you did.
> >
> >Carsten
>
> I am probably confused, this is going to be a FAQ IMHO ;)
>
> This is what I did to build:
>
> cd $TARDIS/Checkouts/xml-cocoon2
> ./build.sh clean
> ./build.sh -Dinclude.webapp.libs=yes webapp
> ./build.sh -Dinstall.war=$TOMCAT_HOME/webapps install
> cd $TOMCAT_HOME/bin
> ./startup.sh
>
>
> I get the same error.
>
> The file :
> '/Volumes/Tardis/Library/TomCat/webapps/cocoon/WEB-INF/classes/CatalogManager.properties'
> line 26 still says
> 'catalogs=${install.war}/cocoon/resources/entities/catalog'
>
> Am I still doing something wrong?
>
>
> regards Jeremy
>
> --
> ___________________________________________________________________
>
> Jeremy Quinn Karma Divers
> webSpace Design
> HyperMedia Research Centre
>
> <ma...@mac.com> <http://www.media.demon.co.uk>
> <phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> For additional commands, email: cocoon-dev-help@xml.apache.org
>
=====
Davanum Srinivas, JNI-FAQ Manager
http://www.jGuru.com/faq/JNI
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.yahoo.com
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: AW: entity catalogs support - finalisation
Posted by Jeremy Quinn <je...@media.demon.co.uk>.
At 5:48 PM +0200 4/9/01, Carsten Ziegeler wrote:
>Did you try to set the correct catalog path in the
>CatalogManager.properties file (in WEB-INF/classes),
>it should read something like "${install.war}/...".
>After changing this manually, it works. Without changing
>I get exactly the same error as you did.
>
>Carsten
I am probably confused, this is going to be a FAQ IMHO ;)
This is what I did to build:
cd $TARDIS/Checkouts/xml-cocoon2
./build.sh clean
./build.sh -Dinclude.webapp.libs=yes webapp
./build.sh -Dinstall.war=$TOMCAT_HOME/webapps install
cd $TOMCAT_HOME/bin
./startup.sh
I get the same error.
The file :
'/Volumes/Tardis/Library/TomCat/webapps/cocoon/WEB-INF/classes/CatalogManager.properties'
line 26 still says
'catalogs=${install.war}/cocoon/resources/entities/catalog'
Am I still doing something wrong?
regards Jeremy
--
___________________________________________________________________
Jeremy Quinn Karma Divers
webSpace Design
HyperMedia Research Centre
<ma...@mac.com> <http://www.media.demon.co.uk>
<phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
AW: entity catalogs support - finalisation
Posted by Carsten Ziegeler <cz...@sundn.de>.
Did you try to set the correct catalog path in the
CatalogManager.properties file (in WEB-INF/classes),
it should read something like "${install.war}/...".
After changing this manually, it works. Without changing
I get exactly the same error as you did.
Carsten
> -----Ursprungliche Nachricht-----
> Von: Jeremy Quinn [mailto:jeremy@media.demon.co.uk]
> Gesendet: Dienstag, 4. September 2001 17:43
> An: cocoon-dev@xml.apache.org
> Betreff: Re: entity catalogs support - finalisation
>
>
> At 12:05 AM +1000 5/9/01, David Crossley wrote:
> >Does the entity resolver start correctly for everybody?
> >At the default verbosity level, you should see resolver
> >messages going to standard output.
> >
> >It would be good to finalise it so that we can add it
> >to the C2.0 release. The only thing that i can see holding
> >it up, is a success report from a Macintosh platform.
> >
> >The only failure reports so far turned out to be config
> >mistakes.
> >
> >(If you need to catch up, then see xdocs/catalog.xml
> >and the link to catalog sample.)
> >
> >regards, David
>
>
> With an update from CVS (about 10 mins ago) running Cocoon 2 under TomCat
> 3.3-m3 running on MacOS X 10.0.4 I get this error message, when I click on
> the link on the welcome page to test the 'Entity resolution using
> catalogs':
>
>
> org.apache.cocoon.ProcessingException: Failed to execute pipeline.:
> org.xml.sax.SAXParseException: File
> "file:/Volumes/Tardis/Library/TomCat/webapps/cocoon/docs/samples/c
atalog/ISOnum.pen"
not found.
Yes, and the file is not there .....
regards Jeremy
--
___________________________________________________________________
Jeremy Quinn Karma Divers
webSpace Design
HyperMedia Research Centre
<ma...@mac.com> <http://www.media.demon.co.uk>
<phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by Jeremy Quinn <je...@media.demon.co.uk>.
At 12:05 AM +1000 5/9/01, David Crossley wrote:
>Does the entity resolver start correctly for everybody?
>At the default verbosity level, you should see resolver
>messages going to standard output.
>
>It would be good to finalise it so that we can add it
>to the C2.0 release. The only thing that i can see holding
>it up, is a success report from a Macintosh platform.
>
>The only failure reports so far turned out to be config
>mistakes.
>
>(If you need to catch up, then see xdocs/catalog.xml
>and the link to catalog sample.)
>
>regards, David
With an update from CVS (about 10 mins ago) running Cocoon 2 under TomCat
3.3-m3 running on MacOS X 10.0.4 I get this error message, when I click on
the link on the welcome page to test the 'Entity resolution using catalogs':
org.apache.cocoon.ProcessingException: Failed to execute pipeline.:
org.xml.sax.SAXParseException: File
"file:/Volumes/Tardis/Library/TomCat/webapps/cocoon/docs/samples/catalog/ISOnum.pen"
not found.
Yes, and the file is not there .....
regards Jeremy
--
___________________________________________________________________
Jeremy Quinn Karma Divers
webSpace Design
HyperMedia Research Centre
<ma...@mac.com> <http://www.media.demon.co.uk>
<phone:+44.[0].20.7737.6831> <pa...@sms.genie.co.uk>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by David Crossley <cr...@indexgeo.com.au>.
Giacomo wrote:
> Quoting David Crossley <cr...@indexgeo.com.au>:
>
> > Does the entity resolver start correctly for everybody?
> > At the default verbosity level, you should see resolver
> > messages going to standard output.
>
> No! It is one of the samples I mentioned not working correctly
> as well as the sitemap editor throwing exception.
Please see the last posting to Konstantin.
> > It would be good to finalise it so that we can add it
> > to the C2.0 release. The only thing that i can see holding
> > it up, is a success report from a Macintosh platform.
>
> Hmm.., Sylvain?
>
> > The only failure reports so far turned out to be config
> > mistakes.
> >
> > (If you need to catch up, then see xdocs/catalog.xml
> > and the link to catalog sample.)
>
> I'm not familiar with the catalog stuff. Do you have a patch for it?
Yes, this has been happening over the last few week. Many
patches have gone into the HEAD 2.1-dev branch to implement
the support.
> Giacomo
> > regards, David
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org
Re: entity catalogs support - finalisation
Posted by Giacomo Pati <gi...@apache.org>.
Quoting David Crossley <cr...@indexgeo.com.au>:
> Does the entity resolver start correctly for everybody?
> At the default verbosity level, you should see resolver
> messages going to standard output.
No! It is one of the samples I mentioned not working correctly as well as the
sitemap editor throwing exception.
> It would be good to finalise it so that we can add it
> to the C2.0 release. The only thing that i can see holding
> it up, is a success report from a Macintosh platform.
Hmm.., Sylvain?
> The only failure reports so far turned out to be config
> mistakes.
>
> (If you need to catch up, then see xdocs/catalog.xml
> and the link to catalog sample.)
I'm not familiar with the catalog stuff. Do you have a patch for it?
Giacomo
>
> regards, David
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
> For additional commands, email: cocoon-dev-help@xml.apache.org
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: cocoon-dev-unsubscribe@xml.apache.org
For additional commands, email: cocoon-dev-help@xml.apache.org