You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@brooklyn.apache.org by he...@apache.org on 2016/02/01 18:47:45 UTC
[09/51] [abbrv] [partial] brooklyn-library git commit: move subdir
from incubator up a level as it is promoted to its own repo (first
non-incubator commit!)
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-1.2.yaml
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-1.2.yaml b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-1.2.yaml
deleted file mode 100644
index 045bb45..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-1.2.yaml
+++ /dev/null
@@ -1,644 +0,0 @@
-[#ftl]
-#
-# Cassandra storage config YAML
-
-# NOTE:
-# See http://wiki.apache.org/cassandra/StorageConfiguration for
-# full explanations of configuration directives
-# /NOTE
-
-# The name of the cluster. This is mainly used to prevent machines in
-# one logical cluster from joining another.
-cluster_name: '${entity.clusterName}'
-
-# This defines the number of tokens randomly assigned to this node on the ring
-# The more tokens, relative to other nodes, the larger the proportion of data
-# that this node will store. You probably want all nodes to have the same number
-# of tokens assuming they have equal hardware capability.
-#
-# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
-# and will use the initial_token as described below.
-#
-# Specifying initial_token will override this setting.
-#
-# If you already have a cluster with 1 token per node, and wish to migrate to
-# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
-num_tokens: ${entity.numTokensPerNode?c}
-
-# If you haven't specified num_tokens, or have set it to the default of 1 then
-# you should always specify InitialToken when setting up a production
-# cluster for the first time, and often when adding capacity later.
-# The principle is that each node should be given an equal slice of
-# the token ring; see http://wiki.apache.org/cassandra/Operations
-# for more details.
-#
-# If blank, Cassandra will request a token bisecting the range of
-# the heaviest-loaded existing node. If there is no load information
-# available, such as is the case with a new cluster, it will pick
-# a random token, which will lead to hot spots.
-initial_token: ${entity.tokensAsString}
-
-# See http://wiki.apache.org/cassandra/HintedHandoff
-hinted_handoff_enabled: true
-# this defines the maximum amount of time a dead host will have hints
-# generated. After it has been dead this long, hints will be dropped.
-max_hint_window_in_ms: 10800000 # 3 hours
-# throttle in KB's per second, per delivery thread
-hinted_handoff_throttle_in_kb: 1024
-# Number of threads with which to deliver hints;
-# Consider increasing this number when you have multi-dc deployments, since
-# cross-dc handoff tends to be slower
-max_hints_delivery_threads: 2
-
-# The following setting populates the page cache on memtable flush and compaction
-# WARNING: Enable this setting only when the whole node's data fits in memory.
-# Defaults to: false
-# populate_io_cache_on_flush: false
-
-# authentication backend, implementing IAuthenticator; used to identify users
-authenticator: org.apache.cassandra.auth.AllowAllAuthenticator
-
-# authorization backend, implementing IAuthorizer; used to limit access/provide permissions
-authorizer: org.apache.cassandra.auth.AllowAllAuthorizer
-
-# The partitioner is responsible for distributing rows (by key) across
-# nodes in the cluster. Any IPartitioner may be used, including your
-# own as long as it is on the classpath. Out of the box, Cassandra
-# provides org.apache.cassandra.dht.{Murmur3Partitioner, RandomPartitioner
-# ByteOrderedPartitioner, OrderPreservingPartitioner (deprecated)}.
-#
-# - RandomPartitioner distributes rows across the cluster evenly by md5.
-# This is the default prior to 1.2 and is retained for compatibility.
-# - Murmur3Partitioner is similar to RandomPartioner but uses Murmur3_128
-# Hash Function instead of md5. When in doubt, this is the best option.
-# - ByteOrderedPartitioner orders rows lexically by key bytes. BOP allows
-# scanning rows in key order, but the ordering can generate hot spots
-# for sequential insertion workloads.
-# - OrderPreservingPartitioner is an obsolete form of BOP, that stores
-# - keys in a less-efficient format and only works with keys that are
-# UTF8-encoded Strings.
-# - CollatingOPP colates according to EN,US rules rather than lexical byte
-# ordering. Use this as an example if you need custom collation.
-#
-# See http://wiki.apache.org/cassandra/Operations for more on
-# partitioners and token selection.
-partitioner: org.apache.cassandra.dht.Murmur3Partitioner
-
-# directories where Cassandra should store data on disk.
-data_file_directories:
- - ${driver.runDir}/data
-
-# commit log
-commitlog_directory: ${driver.runDir}/commitlog
-
-# policy for data disk failures:
-# stop: shut down gossip and Thrift, leaving the node effectively dead, but
-# still inspectable via JMX.
-# best_effort: stop using the failed disk and respond to requests based on
-# remaining available sstables. This means you WILL see obsolete
-# data at CL.ONE!
-# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
-disk_failure_policy: stop
-
-# Maximum size of the key cache in memory.
-#
-# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
-# minimum, sometimes more. The key cache is fairly tiny for the amount of
-# time it saves, so it's worthwhile to use it at large numbers.
-# The row cache saves even more time, but must store the whole values of
-# its rows, so it is extremely space-intensive. It's best to only use the
-# row cache if you have hot rows or static rows.
-#
-# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
-#
-# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
-key_cache_size_in_mb:
-
-# Duration in seconds after which Cassandra should
-# safe the keys cache. Caches are saved to saved_caches_directory as
-# specified in this configuration file.
-#
-# Saved caches greatly improve cold-start speeds, and is relatively cheap in
-# terms of I/O for the key cache. Row cache saving is much more expensive and
-# has limited use.
-#
-# Default is 14400 or 4 hours.
-key_cache_save_period: 14400
-
-# Number of keys from the key cache to save
-# Disabled by default, meaning all keys are going to be saved
-# key_cache_keys_to_save: 100
-
-# Maximum size of the row cache in memory.
-# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
-#
-# Default value is 0, to disable row caching.
-row_cache_size_in_mb: 0
-
-# Duration in seconds after which Cassandra should
-# safe the row cache. Caches are saved to saved_caches_directory as specified
-# in this configuration file.
-#
-# Saved caches greatly improve cold-start speeds, and is relatively cheap in
-# terms of I/O for the key cache. Row cache saving is much more expensive and
-# has limited use.
-#
-# Default is 0 to disable saving the row cache.
-row_cache_save_period: 0
-
-# Number of keys from the row cache to save
-# Disabled by default, meaning all keys are going to be saved
-# row_cache_keys_to_save: 100
-
-# The provider for the row cache to use.
-#
-# Supported values are: ConcurrentLinkedHashCacheProvider, SerializingCacheProvider
-#
-# SerializingCacheProvider serialises the contents of the row and stores
-# it in native memory, i.e., off the JVM Heap. Serialized rows take
-# significantly less memory than "live" rows in the JVM, so you can cache
-# more rows in a given memory footprint. And storing the cache off-heap
-# means you can use smaller heap sizes, reducing the impact of GC pauses.
-#
-# It is also valid to specify the fully-qualified class name to a class
-# that implements org.apache.cassandra.cache.IRowCacheProvider.
-#
-# Defaults to SerializingCacheProvider
-row_cache_provider: SerializingCacheProvider
-
-# saved caches
-saved_caches_directory: ${driver.runDir}/saved_caches
-
-# commitlog_sync may be either "periodic" or "batch."
-# When in batch mode, Cassandra won't ack writes until the commit log
-# has been fsynced to disk. It will wait up to
-# commitlog_sync_batch_window_in_ms milliseconds for other writes, before
-# performing the sync.
-#
-# commitlog_sync: batch
-# commitlog_sync_batch_window_in_ms: 50
-#
-# the other option is "periodic" where writes may be acked immediately
-# and the CommitLog is simply synced every commitlog_sync_period_in_ms
-# milliseconds.
-commitlog_sync: periodic
-commitlog_sync_period_in_ms: 10000
-
-# The size of the individual commitlog file segments. A commitlog
-# segment may be archived, deleted, or recycled once all the data
-# in it (potentally from each columnfamily in the system) has been
-# flushed to sstables.
-#
-# The default size is 32, which is almost always fine, but if you are
-# archiving commitlog segments (see commitlog_archiving.properties),
-# then you probably want a finer granularity of archiving; 8 or 16 MB
-# is reasonable.
-commitlog_segment_size_in_mb: 32
-
-# any class that implements the SeedProvider interface and has a
-# constructor that takes a Map<String, String> of parameters will do.
-seed_provider:
- # Addresses of hosts that are deemed contact points.
- # Cassandra nodes use this list of hosts to find each other and learn
- # the topology of the ring. You must change this if you are running
- # multiple nodes!
- - class_name: org.apache.cassandra.locator.SimpleSeedProvider
- parameters:
- # seeds is actually a comma-delimited list of addresses.
- # Ex: "<ip1>,<ip2>,<ip3>"
- - seeds: "${entity.seeds}"
-
-# emergency pressure valve: each time heap usage after a full (CMS)
-# garbage collection is above this fraction of the max, Cassandra will
-# flush the largest memtables.
-#
-# Set to 1.0 to disable. Setting this lower than
-# CMSInitiatingOccupancyFraction is not likely to be useful.
-#
-# RELYING ON THIS AS YOUR PRIMARY TUNING MECHANISM WILL WORK POORLY:
-# it is most effective under light to moderate load, or read-heavy
-# workloads; under truly massive write load, it will often be too
-# little, too late.
-flush_largest_memtables_at: 0.75
-
-# emergency pressure valve #2: the first time heap usage after a full
-# (CMS) garbage collection is above this fraction of the max,
-# Cassandra will reduce cache maximum _capacity_ to the given fraction
-# of the current _size_. Should usually be set substantially above
-# flush_largest_memtables_at, since that will have less long-term
-# impact on the system.
-#
-# Set to 1.0 to disable. Setting this lower than
-# CMSInitiatingOccupancyFraction is not likely to be useful.
-reduce_cache_sizes_at: 0.85
-reduce_cache_capacity_to: 0.6
-
-# For workloads with more data than can fit in memory, Cassandra's
-# bottleneck will be reads that need to fetch data from
-# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
-# order to allow the operations to enqueue low enough in the stack
-# that the OS and drives can reorder them.
-#
-# On the other hand, since writes are almost never IO bound, the ideal
-# number of "concurrent_writes" is dependent on the number of cores in
-# your system; (8 * number_of_cores) is a good rule of thumb.
-concurrent_reads: 32
-concurrent_writes: 32
-
-# Total memory to use for memtables. Cassandra will flush the largest
-# memtable when this much memory is used.
-# If omitted, Cassandra will set it to 1/3 of the heap.
-# memtable_total_space_in_mb: 2048
-
-# Total space to use for commitlogs. Since commitlog segments are
-# mmapped, and hence use up address space, the default size is 32
-# on 32-bit JVMs, and 1024 on 64-bit JVMs.
-#
-# If space gets above this value (it will round up to the next nearest
-# segment multiple), Cassandra will flush every dirty CF in the oldest
-# segment and remove it. So a small total commitlog space will tend
-# to cause more flush activity on less-active columnfamilies.
-# commitlog_total_space_in_mb: 4096
-
-# This sets the amount of memtable flush writer threads. These will
-# be blocked by disk io, and each one will hold a memtable in memory
-# while blocked. If you have a large heap and many data directories,
-# you can increase this value for better flush performance.
-# By default this will be set to the amount of data directories defined.
-#memtable_flush_writers: 1
-
-# the number of full memtables to allow pending flush, that is,
-# waiting for a writer thread. At a minimum, this should be set to
-# the maximum number of secondary indexes created on a single CF.
-memtable_flush_queue_size: 4
-
-# Whether to, when doing sequential writing, fsync() at intervals in
-# order to force the operating system to flush the dirty
-# buffers. Enable this to avoid sudden dirty buffer flushing from
-# impacting read latencies. Almost always a good idea on SSD:s; not
-# necessarily on platters.
-trickle_fsync: false
-trickle_fsync_interval_in_kb: 10240
-
-# TCP port, for commands and data
-storage_port: ${entity.gossipPort?c}
-
-# SSL port, for encrypted communication. Unused unless enabled in
-# encryption_options
-ssl_storage_port: ${entity.sslGossipPort?c}
-
-# Address to bind to and tell other Cassandra nodes to connect to. You
-# _must_ change this if you want multiple nodes to be able to
-# communicate!
-#
-# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
-# will always do the Right Thing *if* the node is properly configured
-# (hostname, name resolution, etc), and the Right Thing is to use the
-# address associated with the hostname (it might not be).
-#
-# Setting this to 0.0.0.0 is always wrong.
-listen_address: ${entity.listenAddress}
-
-# Address to broadcast to other Cassandra nodes
-# Leaving this blank will set it to the same value as listen_address
-broadcast_address: ${entity.broadcastAddress}
-
-# Whether to start the native transport server.
-# Currently, only the thrift server is started by default because the native
-# transport is considered beta.
-# Please note that the address on which the native transport is bound is the
-# same as the rpc_address. The port however is different and specified below.
-start_native_transport: true
-# port for the CQL native transport to listen for clients on
-native_transport_port: ${entity.nativeTransportPort?c}
-# The minimum and maximum threads for handling requests when the native
-# transport is used. The meaning is those is similar to the one of
-# rpc_min_threads and rpc_max_threads, though the default differ slightly and
-# are the ones below:
-#native_transport_min_threads: 16
-#native_transport_max_threads: 128
-
-
-# Whether to start the thrift rpc server.
-start_rpc: true
-# The address to bind the Thrift RPC service to -- clients connect
-# here. Unlike ListenAddress above, you *can* specify 0.0.0.0 here if
-# you want Thrift to listen on all interfaces.
-#
-# Leaving this blank has the same effect it does for ListenAddress,
-# (i.e. it will be based on the configured hostname of the node).
-rpc_address: ${entity.rpcAddress}
-# port for Thrift to listen for clients on
-rpc_port: ${entity.thriftPort?c}
-
-# enable or disable keepalive on rpc connections
-rpc_keepalive: true
-
-# Cassandra provides three out-of-the-box options for the RPC Server:
-#
-# sync -> One thread per thrift connection. For a very large number of clients, memory
-# will be your limiting factor. On a 64 bit JVM, 128KB is the minimum stack size
-# per thread, and that will correspond to your use of virtual memory (but physical memory
-# may be limited depending on use of stack space).
-#
-# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
-# asynchronously using a small number of threads that does not vary with the amount
-# of thrift clients (and thus scales well to many clients). The rpc requests are still
-# synchronous (one thread per active request).
-#
-# The default is sync because on Windows hsha is about 30% slower. On Linux,
-# sync/hsha performance is about the same, with hsha of course using less memory.
-#
-# Alternatively, can provide your own RPC server by providing the fully-qualified class name
-# of an o.a.c.t.TServerFactory that can create an instance of it.
-rpc_server_type: sync
-
-# Uncomment rpc_min|max_thread to set request pool size limits.
-#
-# Regardless of your choice of RPC server (see above), the number of maximum requests in the
-# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
-# RPC server, it also dictates the number of clients that can be connected at all).
-#
-# The default is unlimited and thus provide no protection against clients overwhelming the server. You are
-# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
-# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
-#
-# rpc_min_threads: 16
-# rpc_max_threads: 2048
-
-# uncomment to set socket buffer sizes on rpc connections
-# rpc_send_buff_size_in_bytes:
-# rpc_recv_buff_size_in_bytes:
-
-# Frame size for thrift (maximum field length).
-thrift_framed_transport_size_in_mb: 15
-
-# The max length of a thrift message, including all fields and
-# internal thrift overhead.
-thrift_max_message_length_in_mb: 16
-
-# Set to true to have Cassandra create a hard link to each sstable
-# flushed or streamed locally in a backups/ subdirectory of the
-# Keyspace data. Removing these links is the operator's
-# responsibility.
-incremental_backups: false
-
-# Whether or not to take a snapshot before each compaction. Be
-# careful using this option, since Cassandra won't clean up the
-# snapshots for you. Mostly useful if you're paranoid when there
-# is a data format change.
-snapshot_before_compaction: false
-
-# Whether or not a snapshot is taken of the data before keyspace truncation
-# or dropping of column families. The STRONGLY advised default of true
-# should be used to provide data safety. If you set this flag to false, you will
-# lose data on truncation or drop.
-auto_snapshot: true
-
-# Add column indexes to a row after its contents reach this size.
-# Increase if your column values are large, or if you have a very large
-# number of columns. The competing causes are, Cassandra has to
-# deserialize this much of the row to read a single column, so you want
-# it to be small - at least if you do many partial-row reads - but all
-# the index data is read for each access, so you don't want to generate
-# that wastefully either.
-column_index_size_in_kb: 64
-
-# Size limit for rows being compacted in memory. Larger rows will spill
-# over to disk and use a slower two-pass compaction process. A message
-# will be logged specifying the row key.
-in_memory_compaction_limit_in_mb: 64
-
-# Number of simultaneous compactions to allow, NOT including
-# validation "compactions" for anti-entropy repair. Simultaneous
-# compactions can help preserve read performance in a mixed read/write
-# workload, by mitigating the tendency of small sstables to accumulate
-# during a single long running compactions. The default is usually
-# fine and if you experience problems with compaction running too
-# slowly or too fast, you should look at
-# compaction_throughput_mb_per_sec first.
-#
-# concurrent_compactors defaults to the number of cores.
-# Uncomment to make compaction mono-threaded, the pre-0.8 default.
-#concurrent_compactors: 1
-
-# Multi-threaded compaction. When enabled, each compaction will use
-# up to one thread per core, plus one thread per sstable being merged.
-# This is usually only useful for SSD-based hardware: otherwise,
-# your concern is usually to get compaction to do LESS i/o (see:
-# compaction_throughput_mb_per_sec), not more.
-multithreaded_compaction: false
-
-# Throttles compaction to the given total throughput across the entire
-# system. The faster you insert data, the faster you need to compact in
-# order to keep the sstable count down, but in general, setting this to
-# 16 to 32 times the rate you are inserting data is more than sufficient.
-# Setting this to 0 disables throttling. Note that this account for all types
-# of compaction, including validation compaction.
-compaction_throughput_mb_per_sec: 16
-
-# Track cached row keys during compaction, and re-cache their new
-# positions in the compacted sstable. Disable if you use really large
-# key caches.
-compaction_preheat_key_cache: true
-
-# Throttles all outbound streaming file transfers on this node to the
-# given total throughput in Mbps. This is necessary because Cassandra does
-# mostly sequential IO when streaming data during bootstrap or repair, which
-# can lead to saturating the network connection and degrading rpc performance.
-# When unset, the default is 400 Mbps or 50 MB/s.
-# stream_throughput_outbound_megabits_per_sec: 400
-
-# How long the coordinator should wait for read operations to complete
-read_request_timeout_in_ms: 10000
-# How long the coordinator should wait for seq or index scans to complete
-range_request_timeout_in_ms: 10000
-# How long the coordinator should wait for writes to complete
-write_request_timeout_in_ms: 10000
-# How long the coordinator should wait for truncates to complete
-# (This can be much longer, because unless auto_snapshot is disabled
-# we need to flush first so we can snapshot before removing the data.)
-truncate_request_timeout_in_ms: 60000
-# The default timeout for other, miscellaneous operations
-request_timeout_in_ms: 10000
-
-# Enable operation timeout information exchange between nodes to accurately
-# measure request timeouts, If disabled cassandra will assuming the request
-# was forwarded to the replica instantly by the coordinator
-#
-# Warning: before enabling this property make sure to ntp is installed
-# and the times are synchronized between the nodes.
-cross_node_timeout: false
-
-# Enable socket timeout for streaming operation.
-# When a timeout occurs during streaming, streaming is retried from the start
-# of the current file. This *can* involve re-streaming an important amount of
-# data, so you should avoid setting the value too low.
-# Default value is 0, which never timeout streams.
-# streaming_socket_timeout_in_ms: 0
-
-# phi value that must be reached for a host to be marked down.
-# most users should never need to adjust this.
-# phi_convict_threshold: 8
-
-# endpoint_snitch -- Set this to a class that implements
-# IEndpointSnitch. The snitch has two functions:
-# - it teaches Cassandra enough about your network topology to route
-# requests efficiently
-# - it allows Cassandra to spread replicas around your cluster to avoid
-# correlated failures. It does this by grouping machines into
-# "datacenters" and "racks." Cassandra will do its best not to have
-# more than one replica on the same "rack" (which may not actually
-# be a physical location)
-#
-# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
-# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
-# ARE PLACED.
-#
-# Out of the box, Cassandra provides
-# - SimpleSnitch:
-# Treats Strategy order as proximity. This improves cache locality
-# when disabling read repair, which can further improve throughput.
-# Only appropriate for single-datacenter deployments.
-# - PropertyFileSnitch:
-# Proximity is determined by rack and data center, which are
-# explicitly configured in cassandra-topology.properties.
-# - GossipingPropertyFileSnitch
-# The rack and datacenter for the local node are defined in
-# cassandra-rackdc.properties and propagated to other nodes via gossip. If
-# cassandra-topology.properties exists, it is used as a fallback, allowing
-# migration from the PropertyFileSnitch.
-# - RackInferringSnitch:
-# Proximity is determined by rack and data center, which are
-# assumed to correspond to the 3rd and 2nd octet of each node's
-# IP address, respectively. Unless this happens to match your
-# deployment conventions (as it did Facebook's), this is best used
-# as an example of writing a custom Snitch class.
-# - Ec2Snitch:
-# Appropriate for EC2 deployments in a single Region. Loads Region
-# and Availability Zone information from the EC2 API. The Region is
-# treated as the Datacenter, and the Availability Zone as the rack.
-# Only private IPs are used, so this will not work across multiple
-# Regions.
-# - Ec2MultiRegionSnitch:
-# Uses public IPs as broadcast_address to allow cross-region
-# connectivity. (Thus, you should set seed addresses to the public
-# IP as well.) You will need to open the storage_port or
-# ssl_storage_port on the public IP firewall. (For intra-Region
-# traffic, Cassandra will switch to the private IP after
-# establishing a connection.)
-#
-# You can use a custom Snitch by setting this to the full class name
-# of the snitch, which will be assumed to be on your classpath.
-endpoint_snitch: ${driver.endpointSnitchName}
-
-# controls how often to perform the more expensive part of host score
-# calculation
-dynamic_snitch_update_interval_in_ms: 100
-# controls how often to reset all host scores, allowing a bad host to
-# possibly recover
-dynamic_snitch_reset_interval_in_ms: 600000
-# if set greater than zero and read_repair_chance is < 1.0, this will allow
-# 'pinning' of replicas to hosts in order to increase cache capacity.
-# The badness threshold will control how much worse the pinned host has to be
-# before the dynamic snitch will prefer other replicas over it. This is
-# expressed as a double which represents a percentage. Thus, a value of
-# 0.2 means Cassandra would continue to prefer the static snitch values
-# until the pinned host was 20% worse than the fastest.
-dynamic_snitch_badness_threshold: 0.1
-
-# request_scheduler -- Set this to a class that implements
-# RequestScheduler, which will schedule incoming client requests
-# according to the specific policy. This is useful for multi-tenancy
-# with a single Cassandra cluster.
-# NOTE: This is specifically for requests from the client and does
-# not affect inter node communication.
-# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
-# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
-# client requests to a node with a separate queue for each
-# request_scheduler_id. The scheduler is further customized by
-# request_scheduler_options as described below.
-request_scheduler: org.apache.cassandra.scheduler.NoScheduler
-
-# Scheduler Options vary based on the type of scheduler
-# NoScheduler - Has no options
-# RoundRobin
-# - throttle_limit -- The throttle_limit is the number of in-flight
-# requests per client. Requests beyond
-# that limit are queued up until
-# running requests can complete.
-# The value of 80 here is twice the number of
-# concurrent_reads + concurrent_writes.
-# - default_weight -- default_weight is optional and allows for
-# overriding the default which is 1.
-# - weights -- Weights are optional and will default to 1 or the
-# overridden default_weight. The weight translates into how
-# many requests are handled during each turn of the
-# RoundRobin, based on the scheduler id.
-#
-# request_scheduler_options:
-# throttle_limit: 80
-# default_weight: 5
-# weights:
-# Keyspace1: 1
-# Keyspace2: 5
-
-# request_scheduler_id -- An identifer based on which to perform
-# the request scheduling. Currently the only valid option is keyspace.
-# request_scheduler_id: keyspace
-
-# index_interval controls the sampling of entries from the primrary
-# row index in terms of space versus time. The larger the interval,
-# the smaller and less effective the sampling will be. In technicial
-# terms, the interval coresponds to the number of index entries that
-# are skipped between taking each sample. All the sampled entries
-# must fit in memory. Generally, a value between 128 and 512 here
-# coupled with a large key cache size on CFs results in the best trade
-# offs. This value is not often changed, however if you have many
-# very small rows (many to an OS page), then increasing this will
-# often lower memory usage without a impact on performance.
-index_interval: 128
-
-# Enable or disable inter-node encryption
-# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
-# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
-# suite for authentication, key exchange and encryption of the actual data transfers.
-# NOTE: No custom encryption options are enabled at the moment
-# The available internode options are : all, none, dc, rack
-#
-# If set to dc cassandra will encrypt the traffic between the DCs
-# If set to rack cassandra will encrypt the traffic between the racks
-#
-# The passwords used in these options must match the passwords used when generating
-# the keystore and truststore. For instructions on generating these files, see:
-# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
-#
-server_encryption_options:
- internode_encryption: none
- keystore: conf/.keystore
- keystore_password: cassandra
- truststore: conf/.truststore
- truststore_password: cassandra
- # More advanced defaults below:
- # protocol: TLS
- # algorithm: SunX509
- # store_type: JKS
- # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA]
-
-# enable or disable client/server encryption.
-client_encryption_options:
- enabled: false
- keystore: conf/.keystore
- keystore_password: cassandra
- # More advanced defaults below:
- # protocol: TLS
- # algorithm: SunX509
- # store_type: JKS
- # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA]
-
-# internode_compression controls whether traffic between nodes is
-# compressed.
-# can be: all - all traffic is compressed
-# dc - traffic between different datacenters is compressed
-# none - nothing is compressed.
-internode_compression: all
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-2.0.yaml
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-2.0.yaml b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-2.0.yaml
deleted file mode 100644
index 518379c..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-2.0.yaml
+++ /dev/null
@@ -1,688 +0,0 @@
-[#ftl]
-#
-# Cassandra storage config YAML
-
-# NOTE:
-# See http://wiki.apache.org/cassandra/StorageConfiguration for
-# full explanations of configuration directives
-# /NOTE
-
-# The name of the cluster. This is mainly used to prevent machines in
-# one logical cluster from joining another.
-cluster_name: '${entity.clusterName}'
-
-# This defines the number of tokens randomly assigned to this node on the ring
-# The more tokens, relative to other nodes, the larger the proportion of data
-# that this node will store. You probably want all nodes to have the same number
-# of tokens assuming they have equal hardware capability.
-#
-# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
-# and will use the initial_token as described below.
-#
-# Specifying initial_token will override this setting.
-#
-# If you already have a cluster with 1 token per node, and wish to migrate to
-# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
-num_tokens: ${entity.numTokensPerNode?c}
-
-# initial_token allows you to specify tokens manually. While you can use it with
-# vnodes (num_tokens > 1, above) -- in which case you should provide a
-# comma-separated list -- it's primarily used when adding nodes to legacy clusters
-# that do not have vnodes enabled.
-# initial_token: ${entity.tokensAsString}
-
-# May either be "true" or "false" to enable globally, or contain a list
-# of data centers to enable per-datacenter.
-# hinted_handoff_enabled: DC1,DC2
-# See http://wiki.apache.org/cassandra/HintedHandoff
-hinted_handoff_enabled: true
-# this defines the maximum amount of time a dead host will have hints
-# generated. After it has been dead this long, new hints for it will not be
-# created until it has been seen alive and gone down again.
-max_hint_window_in_ms: 10800000 # 3 hours
-# Maximum throttle in KBs per second, per delivery thread. This will be
-# reduced proportionally to the number of nodes in the cluster. (If there
-# are two nodes in the cluster, each delivery thread will use the maximum
-# rate; if there are three, each will throttle to half of the maximum,
-# since we expect two nodes to be delivering hints simultaneously.)
-hinted_handoff_throttle_in_kb: 1024
-# Number of threads with which to deliver hints;
-# Consider increasing this number when you have multi-dc deployments, since
-# cross-dc handoff tends to be slower
-max_hints_delivery_threads: 2
-
-# Maximum throttle in KBs per second, total. This will be
-# reduced proportionally to the number of nodes in the cluster.
-batchlog_replay_throttle_in_kb: 1024
-
-# Authentication backend, implementing IAuthenticator; used to identify users
-# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
-# PasswordAuthenticator}.
-#
-# - AllowAllAuthenticator performs no checks - set it to disable authentication.
-# - PasswordAuthenticator relies on username/password pairs to authenticate
-# users. It keeps usernames and hashed passwords in system_auth.credentials table.
-# Please increase system_auth keyspace replication factor if you use this authenticator.
-authenticator: AllowAllAuthenticator
-
-# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
-# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
-# CassandraAuthorizer}.
-#
-# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
-# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
-# increase system_auth keyspace replication factor if you use this authorizer.
-authorizer: AllowAllAuthorizer
-
-# Validity period for permissions cache (fetching permissions can be an
-# expensive operation depending on the authorizer, CassandraAuthorizer is
-# one example). Defaults to 2000, set to 0 to disable.
-# Will be disabled automatically for AllowAllAuthorizer.
-permissions_validity_in_ms: 2000
-
-# The partitioner is responsible for distributing groups of rows (by
-# partition key) across nodes in the cluster. You should leave this
-# alone for new clusters. The partitioner can NOT be changed without
-# reloading all data, so when upgrading you should set this to the
-# same partitioner you were already using.
-#
-# Besides Murmur3Partitioner, partitioners included for backwards
-# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
-# OrderPreservingPartitioner.
-#
-partitioner: org.apache.cassandra.dht.Murmur3Partitioner
-
-# Directories where Cassandra should store data on disk. Cassandra
-# will spread data evenly across them, subject to the granularity of
-# the configured compaction strategy.
-data_file_directories:
- - ${driver.runDir}/data
-
-# commit log
-commitlog_directory: ${driver.runDir}/commitlog
-
-# policy for data disk failures:
-# stop_paranoid: shut down gossip and Thrift even for single-sstable errors.
-# stop: shut down gossip and Thrift, leaving the node effectively dead, but
-# can still be inspected via JMX.
-# best_effort: stop using the failed disk and respond to requests based on
-# remaining available sstables. This means you WILL see obsolete
-# data at CL.ONE!
-# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
-disk_failure_policy: stop
-
-# policy for commit disk failures:
-# stop: shut down gossip and Thrift, leaving the node effectively dead, but
-# can still be inspected via JMX.
-# stop_commit: shutdown the commit log, letting writes collect but
-# continuing to service reads, as in pre-2.0.5 Cassandra
-# ignore: ignore fatal errors and let the batches fail
-commit_failure_policy: stop
-
-# Maximum size of the key cache in memory.
-#
-# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
-# minimum, sometimes more. The key cache is fairly tiny for the amount of
-# time it saves, so it's worthwhile to use it at large numbers.
-# The row cache saves even more time, but must contain the entire row,
-# so it is extremely space-intensive. It's best to only use the
-# row cache if you have hot rows or static rows.
-#
-# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
-#
-# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
-key_cache_size_in_mb:
-
-# Duration in seconds after which Cassandra should
-# save the key cache. Caches are saved to saved_caches_directory as
-# specified in this configuration file.
-#
-# Saved caches greatly improve cold-start speeds, and is relatively cheap in
-# terms of I/O for the key cache. Row cache saving is much more expensive and
-# has limited use.
-#
-# Default is 14400 or 4 hours.
-key_cache_save_period: 14400
-
-# Number of keys from the key cache to save
-# Disabled by default, meaning all keys are going to be saved
-# key_cache_keys_to_save: 100
-
-# Maximum size of the row cache in memory.
-# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
-#
-# Default value is 0, to disable row caching.
-row_cache_size_in_mb: 0
-
-# Duration in seconds after which Cassandra should
-# safe the row cache. Caches are saved to saved_caches_directory as specified
-# in this configuration file.
-#
-# Saved caches greatly improve cold-start speeds, and is relatively cheap in
-# terms of I/O for the key cache. Row cache saving is much more expensive and
-# has limited use.
-#
-# Default is 0 to disable saving the row cache.
-row_cache_save_period: 0
-
-# Number of keys from the row cache to save
-# Disabled by default, meaning all keys are going to be saved
-# row_cache_keys_to_save: 100
-
-# The off-heap memory allocator. Affects storage engine metadata as
-# well as caches. Experiments show that JEMAlloc saves some memory
-# than the native GCC allocator (i.e., JEMalloc is more
-# fragmentation-resistant).
-#
-# Supported values are: NativeAllocator, JEMallocAllocator
-#
-# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
-# modify cassandra-env.sh as directed in the file.
-#
-# Defaults to NativeAllocator
-# memory_allocator: NativeAllocator
-
-# saved caches
-saved_caches_directory: ${driver.runDir}/saved_caches
-
-# commitlog_sync may be either "periodic" or "batch."
-# When in batch mode, Cassandra won't ack writes until the commit log
-# has been fsynced to disk. It will wait up to
-# commitlog_sync_batch_window_in_ms milliseconds for other writes, before
-# performing the sync.
-#
-# commitlog_sync: batch
-# commitlog_sync_batch_window_in_ms: 50
-#
-# the other option is "periodic" where writes may be acked immediately
-# and the CommitLog is simply synced every commitlog_sync_period_in_ms
-# milliseconds. By default this allows 1024*(CPU cores) pending
-# entries on the commitlog queue. If you are writing very large blobs,
-# you should reduce that; 16*cores works reasonably well for 1MB blobs.
-# It should be at least as large as the concurrent_writes setting.
-commitlog_sync: periodic
-commitlog_sync_period_in_ms: 10000
-# commitlog_periodic_queue_size:
-
-# The size of the individual commitlog file segments. A commitlog
-# segment may be archived, deleted, or recycled once all the data
-# in it (potentially from each columnfamily in the system) has been
-# flushed to sstables.
-#
-# The default size is 32, which is almost always fine, but if you are
-# archiving commitlog segments (see commitlog_archiving.properties),
-# then you probably want a finer granularity of archiving; 8 or 16 MB
-# is reasonable.
-commitlog_segment_size_in_mb: 32
-
-# any class that implements the SeedProvider interface and has a
-# constructor that takes a Map<String, String> of parameters will do.
-seed_provider:
- # Addresses of hosts that are deemed contact points.
- # Cassandra nodes use this list of hosts to find each other and learn
- # the topology of the ring. You must change this if you are running
- # multiple nodes!
- - class_name: org.apache.cassandra.locator.SimpleSeedProvider
- parameters:
- # seeds is actually a comma-delimited list of addresses.
- # Ex: "<ip1>,<ip2>,<ip3>"
- - seeds: "${entity.seeds}"
-
-# For workloads with more data than can fit in memory, Cassandra's
-# bottleneck will be reads that need to fetch data from
-# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
-# order to allow the operations to enqueue low enough in the stack
-# that the OS and drives can reorder them.
-#
-# On the other hand, since writes are almost never IO bound, the ideal
-# number of "concurrent_writes" is dependent on the number of cores in
-# your system; (8 * number_of_cores) is a good rule of thumb.
-concurrent_reads: 32
-concurrent_writes: 32
-
-# Total memory to use for sstable-reading buffers. Defaults to
-# the smaller of 1/4 of heap or 512MB.
-# file_cache_size_in_mb: 512
-
-# Total memory to use for memtables. Cassandra will flush the largest
-# memtable when this much memory is used.
-# If omitted, Cassandra will set it to 1/4 of the heap.
-# memtable_total_space_in_mb: 2048
-
-# Total space to use for commitlogs. Since commitlog segments are
-# mmapped, and hence use up address space, the default size is 32
-# on 32-bit JVMs, and 1024 on 64-bit JVMs.
-#
-# If space gets above this value (it will round up to the next nearest
-# segment multiple), Cassandra will flush every dirty CF in the oldest
-# segment and remove it. So a small total commitlog space will tend
-# to cause more flush activity on less-active columnfamilies.
-# commitlog_total_space_in_mb: 4096
-
-# This sets the amount of memtable flush writer threads. These will
-# be blocked by disk io, and each one will hold a memtable in memory
-# while blocked. If you have a large heap and many data directories,
-# you can increase this value for better flush performance.
-# By default this will be set to the amount of data directories defined.
-#memtable_flush_writers: 1
-
-# the number of full memtables to allow pending flush, that is,
-# waiting for a writer thread. At a minimum, this should be set to
-# the maximum number of secondary indexes created on a single CF.
-memtable_flush_queue_size: 4
-
-# Whether to, when doing sequential writing, fsync() at intervals in
-# order to force the operating system to flush the dirty
-# buffers. Enable this to avoid sudden dirty buffer flushing from
-# impacting read latencies. Almost always a good idea on SSDs; not
-# necessarily on platters.
-trickle_fsync: false
-trickle_fsync_interval_in_kb: 10240
-
-# TCP port, for commands and data
-storage_port: ${entity.gossipPort?c}
-
-# SSL port, for encrypted communication. Unused unless enabled in
-# encryption_options
-ssl_storage_port: ${entity.sslGossipPort?c}
-
-# Address to bind to and tell other Cassandra nodes to connect to. You
-# _must_ change this if you want multiple nodes to be able to
-# communicate!
-#
-# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
-# will always do the Right Thing _if_ the node is properly configured
-# (hostname, name resolution, etc), and the Right Thing is to use the
-# address associated with the hostname (it might not be).
-#
-# Setting this to 0.0.0.0 is always wrong.
-listen_address: ${entity.listenAddress}
-
-# Address to broadcast to other Cassandra nodes
-# Leaving this blank will set it to the same value as listen_address
-broadcast_address: ${entity.broadcastAddress}
-
-# Internode authentication backend, implementing IInternodeAuthenticator;
-# used to allow/disallow connections from peer nodes.
-# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
-
-# Whether to start the native transport server.
-# Please note that the address on which the native transport is bound is the
-# same as the rpc_address. The port however is different and specified below.
-start_native_transport: true
-# port for the CQL native transport to listen for clients on
-native_transport_port: ${entity.nativeTransportPort?c}
-# The maximum threads for handling requests when the native transport is used.
-# This is similar to rpc_max_threads though the default differs slightly (and
-# there is no native_transport_min_threads, idle threads will always be stopped
-# after 30 seconds).
-# native_transport_max_threads: 128
-#
-# The maximum size of allowed frame. Frame (requests) larger than this will
-# be rejected as invalid. The default is 256MB.
-# native_transport_max_frame_size_in_mb: 256
-
-# Whether to start the thrift rpc server.
-start_rpc: true
-
-# The address to bind the Thrift RPC service and native transport
-# server -- clients connect here.
-#
-# Leaving this blank has the same effect it does for ListenAddress,
-# (i.e. it will be based on the configured hostname of the node).
-#
-# Note that unlike ListenAddress above, it is allowed to specify 0.0.0.0
-# here if you want to listen on all interfaces, but that will break clients
-# that rely on node auto-discovery.
-rpc_address: ${entity.rpcAddress}
-# port for Thrift to listen for clients on
-rpc_port: ${entity.thriftPort?c}
-
-# enable or disable keepalive on rpc connections
-rpc_keepalive: true
-
-# Cassandra provides two out-of-the-box options for the RPC Server:
-#
-# sync -> One thread per thrift connection. For a very large number of clients, memory
-# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
-# per thread, and that will correspond to your use of virtual memory (but physical memory
-# may be limited depending on use of stack space).
-#
-# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
-# asynchronously using a small number of threads that does not vary with the amount
-# of thrift clients (and thus scales well to many clients). The rpc requests are still
-# synchronous (one thread per active request).
-#
-# The default is sync because on Windows hsha is about 30% slower. On Linux,
-# sync/hsha performance is about the same, with hsha of course using less memory.
-#
-# Alternatively, can provide your own RPC server by providing the fully-qualified class name
-# of an o.a.c.t.TServerFactory that can create an instance of it.
-rpc_server_type: sync
-
-# Uncomment rpc_min|max_thread to set request pool size limits.
-#
-# Regardless of your choice of RPC server (see above), the number of maximum requests in the
-# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
-# RPC server, it also dictates the number of clients that can be connected at all).
-#
-# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
-# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
-# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
-#
-# rpc_min_threads: 16
-# rpc_max_threads: 2048
-
-# uncomment to set socket buffer sizes on rpc connections
-# rpc_send_buff_size_in_bytes:
-# rpc_recv_buff_size_in_bytes:
-
-# Uncomment to set socket buffer size for internode communication
-# Note that when setting this, the buffer size is limited by net.core.wmem_max
-# and when not setting it it is defined by net.ipv4.tcp_wmem
-# See:
-# /proc/sys/net/core/wmem_max
-# /proc/sys/net/core/rmem_max
-# /proc/sys/net/ipv4/tcp_wmem
-# /proc/sys/net/ipv4/tcp_wmem
-# and: man tcp
-# internode_send_buff_size_in_bytes:
-# internode_recv_buff_size_in_bytes:
-
-# Frame size for thrift (maximum message length).
-thrift_framed_transport_size_in_mb: 15
-
-# Set to true to have Cassandra create a hard link to each sstable
-# flushed or streamed locally in a backups/ subdirectory of the
-# keyspace data. Removing these links is the operator's
-# responsibility.
-incremental_backups: false
-
-# Whether or not to take a snapshot before each compaction. Be
-# careful using this option, since Cassandra won't clean up the
-# snapshots for you. Mostly useful if you're paranoid when there
-# is a data format change.
-snapshot_before_compaction: false
-
-# Whether or not a snapshot is taken of the data before keyspace truncation
-# or dropping of column families. The STRONGLY advised default of true
-# should be used to provide data safety. If you set this flag to false, you will
-# lose data on truncation or drop.
-auto_snapshot: true
-
-# When executing a scan, within or across a partition, we need to keep the
-# tombstones seen in memory so we can return them to the coordinator, which
-# will use them to make sure other replicas also know about the deleted rows.
-# With workloads that generate a lot of tombstones, this can cause performance
-# problems and even exaust the server heap.
-# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
-# Adjust the thresholds here if you understand the dangers and want to
-# scan more tombstones anyway. These thresholds may also be adjusted at runtime
-# using the StorageService mbean.
-tombstone_warn_threshold: 1000
-tombstone_failure_threshold: 100000
-
-# Add column indexes to a row after its contents reach this size.
-# Increase if your column values are large, or if you have a very large
-# number of columns. The competing causes are, Cassandra has to
-# deserialize this much of the row to read a single column, so you want
-# it to be small - at least if you do many partial-row reads - but all
-# the index data is read for each access, so you don't want to generate
-# that wastefully either.
-column_index_size_in_kb: 64
-
-
-# Log WARN on any batch size exceeding this value. 5kb per batch by default.
-# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
-batch_size_warn_threshold_in_kb: 5
-
-# Size limit for rows being compacted in memory. Larger rows will spill
-# over to disk and use a slower two-pass compaction process. A message
-# will be logged specifying the row key.
-in_memory_compaction_limit_in_mb: 64
-
-# Number of simultaneous compactions to allow, NOT including
-# validation "compactions" for anti-entropy repair. Simultaneous
-# compactions can help preserve read performance in a mixed read/write
-# workload, by mitigating the tendency of small sstables to accumulate
-# during a single long running compactions. The default is usually
-# fine and if you experience problems with compaction running too
-# slowly or too fast, you should look at
-# compaction_throughput_mb_per_sec first.
-#
-# concurrent_compactors defaults to the number of cores.
-# Uncomment to make compaction mono-threaded, the pre-0.8 default.
-#concurrent_compactors: 1
-
-# Multi-threaded compaction. When enabled, each compaction will use
-# up to one thread per core, plus one thread per sstable being merged.
-# This is usually only useful for SSD-based hardware: otherwise,
-# your concern is usually to get compaction to do LESS i/o (see:
-# compaction_throughput_mb_per_sec), not more.
-multithreaded_compaction: false
-
-# Throttles compaction to the given total throughput across the entire
-# system. The faster you insert data, the faster you need to compact in
-# order to keep the sstable count down, but in general, setting this to
-# 16 to 32 times the rate you are inserting data is more than sufficient.
-# Setting this to 0 disables throttling. Note that this account for all types
-# of compaction, including validation compaction.
-compaction_throughput_mb_per_sec: 16
-
-# Track cached row keys during compaction, and re-cache their new
-# positions in the compacted sstable. Disable if you use really large
-# key caches.
-compaction_preheat_key_cache: true
-
-# Throttles all outbound streaming file transfers on this node to the
-# given total throughput in Mbps. This is necessary because Cassandra does
-# mostly sequential IO when streaming data during bootstrap or repair, which
-# can lead to saturating the network connection and degrading rpc performance.
-# When unset, the default is 200 Mbps or 25 MB/s.
-# stream_throughput_outbound_megabits_per_sec: 200
-
-# How long the coordinator should wait for read operations to complete
-read_request_timeout_in_ms: 5000
-# How long the coordinator should wait for seq or index scans to complete
-range_request_timeout_in_ms: 10000
-# How long the coordinator should wait for writes to complete
-write_request_timeout_in_ms: 2000
-# How long a coordinator should continue to retry a CAS operation
-# that contends with other proposals for the same row
-cas_contention_timeout_in_ms: 1000
-# How long the coordinator should wait for truncates to complete
-# (This can be much longer, because unless auto_snapshot is disabled
-# we need to flush first so we can snapshot before removing the data.)
-truncate_request_timeout_in_ms: 60000
-# The default timeout for other, miscellaneous operations
-request_timeout_in_ms: 10000
-
-# Enable operation timeout information exchange between nodes to accurately
-# measure request timeouts. If disabled, replicas will assume that requests
-# were forwarded to them instantly by the coordinator, which means that
-# under overload conditions we will waste that much extra time processing
-# already-timed-out requests.
-#
-# Warning: before enabling this property make sure to ntp is installed
-# and the times are synchronized between the nodes.
-cross_node_timeout: false
-
-# Enable socket timeout for streaming operation.
-# When a timeout occurs during streaming, streaming is retried from the start
-# of the current file. This _can_ involve re-streaming an important amount of
-# data, so you should avoid setting the value too low.
-# Default value is 0, which never timeout streams.
-# streaming_socket_timeout_in_ms: 0
-
-# phi value that must be reached for a host to be marked down.
-# most users should never need to adjust this.
-# phi_convict_threshold: 8
-
-# endpoint_snitch -- Set this to a class that implements
-# IEndpointSnitch. The snitch has two functions:
-# - it teaches Cassandra enough about your network topology to route
-# requests efficiently
-# - it allows Cassandra to spread replicas around your cluster to avoid
-# correlated failures. It does this by grouping machines into
-# "datacenters" and "racks." Cassandra will do its best not to have
-# more than one replica on the same "rack" (which may not actually
-# be a physical location)
-#
-# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
-# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
-# ARE PLACED.
-#
-# Out of the box, Cassandra provides
-# - SimpleSnitch:
-# Treats Strategy order as proximity. This can improve cache
-# locality when disabling read repair. Only appropriate for
-# single-datacenter deployments.
-# - GossipingPropertyFileSnitch
-# This should be your go-to snitch for production use. The rack
-# and datacenter for the local node are defined in
-# cassandra-rackdc.properties and propagated to other nodes via
-# gossip. If cassandra-topology.properties exists, it is used as a
-# fallback, allowing migration from the PropertyFileSnitch.
-# - PropertyFileSnitch:
-# Proximity is determined by rack and data center, which are
-# explicitly configured in cassandra-topology.properties.
-# - Ec2Snitch:
-# Appropriate for EC2 deployments in a single Region. Loads Region
-# and Availability Zone information from the EC2 API. The Region is
-# treated as the datacenter, and the Availability Zone as the rack.
-# Only private IPs are used, so this will not work across multiple
-# Regions.
-# - Ec2MultiRegionSnitch:
-# Uses public IPs as broadcast_address to allow cross-region
-# connectivity. (Thus, you should set seed addresses to the public
-# IP as well.) You will need to open the storage_port or
-# ssl_storage_port on the public IP firewall. (For intra-Region
-# traffic, Cassandra will switch to the private IP after
-# establishing a connection.)
-# - RackInferringSnitch:
-# Proximity is determined by rack and data center, which are
-# assumed to correspond to the 3rd and 2nd octet of each node's IP
-# address, respectively. Unless this happens to match your
-# deployment conventions, this is best used as an example of
-# writing a custom Snitch class and is provided in that spirit.
-#
-# You can use a custom Snitch by setting this to the full class name
-# of the snitch, which will be assumed to be on your classpath.
-endpoint_snitch: ${driver.endpointSnitchName}
-
-# controls how often to perform the more expensive part of host score
-# calculation
-dynamic_snitch_update_interval_in_ms: 100
-# controls how often to reset all host scores, allowing a bad host to
-# possibly recover
-dynamic_snitch_reset_interval_in_ms: 600000
-# if set greater than zero and read_repair_chance is < 1.0, this will allow
-# 'pinning' of replicas to hosts in order to increase cache capacity.
-# The badness threshold will control how much worse the pinned host has to be
-# before the dynamic snitch will prefer other replicas over it. This is
-# expressed as a double which represents a percentage. Thus, a value of
-# 0.2 means Cassandra would continue to prefer the static snitch values
-# until the pinned host was 20% worse than the fastest.
-dynamic_snitch_badness_threshold: 0.1
-
-# request_scheduler -- Set this to a class that implements
-# RequestScheduler, which will schedule incoming client requests
-# according to the specific policy. This is useful for multi-tenancy
-# with a single Cassandra cluster.
-# NOTE: This is specifically for requests from the client and does
-# not affect inter node communication.
-# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
-# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
-# client requests to a node with a separate queue for each
-# request_scheduler_id. The scheduler is further customized by
-# request_scheduler_options as described below.
-request_scheduler: org.apache.cassandra.scheduler.NoScheduler
-
-# Scheduler Options vary based on the type of scheduler
-# NoScheduler - Has no options
-# RoundRobin
-# - throttle_limit -- The throttle_limit is the number of in-flight
-# requests per client. Requests beyond
-# that limit are queued up until
-# running requests can complete.
-# The value of 80 here is twice the number of
-# concurrent_reads + concurrent_writes.
-# - default_weight -- default_weight is optional and allows for
-# overriding the default which is 1.
-# - weights -- Weights are optional and will default to 1 or the
-# overridden default_weight. The weight translates into how
-# many requests are handled during each turn of the
-# RoundRobin, based on the scheduler id.
-#
-# request_scheduler_options:
-# throttle_limit: 80
-# default_weight: 5
-# weights:
-# Keyspace1: 1
-# Keyspace2: 5
-
-# request_scheduler_id -- An identifier based on which to perform
-# the request scheduling. Currently the only valid option is keyspace.
-# request_scheduler_id: keyspace
-
-# Enable or disable inter-node encryption
-# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
-# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
-# suite for authentication, key exchange and encryption of the actual data transfers.
-# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
-# NOTE: No custom encryption options are enabled at the moment
-# The available internode options are : all, none, dc, rack
-#
-# If set to dc cassandra will encrypt the traffic between the DCs
-# If set to rack cassandra will encrypt the traffic between the racks
-#
-# The passwords used in these options must match the passwords used when generating
-# the keystore and truststore. For instructions on generating these files, see:
-# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
-#
-server_encryption_options:
- internode_encryption: none
- keystore: conf/.keystore
- keystore_password: cassandra
- truststore: conf/.truststore
- truststore_password: cassandra
- # More advanced defaults below:
- # protocol: TLS
- # algorithm: SunX509
- # store_type: JKS
- # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
- # require_client_auth: false
-
-# enable or disable client/server encryption.
-client_encryption_options:
- enabled: false
- keystore: conf/.keystore
- keystore_password: cassandra
- # require_client_auth: false
- # Set trustore and truststore_password if require_client_auth is true
- # truststore: conf/.truststore
- # truststore_password: cassandra
- # More advanced defaults below:
- # protocol: TLS
- # algorithm: SunX509
- # store_type: JKS
- # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
-
-# internode_compression controls whether traffic between nodes is
-# compressed.
-# can be: all - all traffic is compressed
-# dc - traffic between different datacenters is compressed
-# none - nothing is compressed.
-internode_compression: all
-
-# Enable or disable tcp_nodelay for inter-dc communication.
-# Disabling it will result in larger (but fewer) network packets being sent,
-# reducing overhead from the TCP protocol itself, at the cost of increasing
-# latency if you block for cross-datacenter responses.
-inter_dc_tcp_nodelay: false
-
-# Enable or disable kernel page cache preheating from contents of the key cache after compaction.
-# When enabled it would preheat only first "page" (4KB) of each row to optimize
-# for sequential access. Note: This could be harmful for fat rows, see CASSANDRA-4937
-# for further details on that topic.
-preheat_kernel_page_cache: false
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-multicloud-snitch.txt
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-multicloud-snitch.txt b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-multicloud-snitch.txt
deleted file mode 100644
index 205b18d..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-multicloud-snitch.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-
-The file cassandra-multicloud-snitch.jar is a snitch implementation
-that handles Cassandra datacenters in different cloud providers.
-
-The source code for cassandra-multicloud-snitch.jar is in sandbox/cassandra-multicloud-snitch.
-
-The source will be contributed to the Cassandra project; when it is available in the
-Cassandra distro (and when we don't want to give backwards compatibility support for
-older Cassandra versions), then we can delete it from Brooklyn.
-
-The jar can be uploaded to a Cassandra Node as part of deployment, for if
-this multi-cloud snitch is desired.
-
-Under Apache conventions, binary files are not part of the source
-release. If you are using the source release, you may add this file
-by copying it from the master repository, which is accessible on the
-web at https://github.com/apache/incubator-brooklyn
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-rackdc.properties
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-rackdc.properties b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-rackdc.properties
deleted file mode 100644
index 8fc323a..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/cassandra/cassandra-rackdc.properties
+++ /dev/null
@@ -1,6 +0,0 @@
-# See http://www.datastax.com/docs/1.1/cluster_architecture/replication
-# Note publicip/privateip added for use by custom MultiCloudSnitch
-dc=${entity.datacenterName}
-rack=${entity.rackName}
-publicip=${entity.publicIp}
-privateip=${entity.privateIp}
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchbase/pillowfight.yaml
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchbase/pillowfight.yaml b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchbase/pillowfight.yaml
deleted file mode 100644
index d91fcc9..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchbase/pillowfight.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-services:
-- type: org.apache.brooklyn.entity.software.base.VanillaSoftwareProcess
- name: CBC Pillowfight
- launch.command: |
- sudo wget -O/etc/apt/sources.list.d/couchbase.list http://packages.couchbase.com/ubuntu/couchbase-ubuntu1204.list
- sudo wget -O- http://packages.couchbase.com/ubuntu/couchbase.key | sudo apt-key add -
- sudo apt-get update
- sudo apt-get install -y libcouchbase2-libevent libcouchbase-dev libcouchbase2-bin
- provisioning.properties:
- # CentOS requires a different launch command, see below
- osFamily: ubuntu
- checkRunning.command: ""
- stop.command: ""
-
- brooklyn.config:
- base_url: http://127.0.0.1:8091/
-
- brooklyn.initializers:
- - type: org.apache.brooklyn.core.effector.ssh.SshCommandEffector
- brooklyn.config:
- name: pillow_fight
- description: runs cbc pillowfight
- command: |
- cbc-pillowfight -U ${base_url}${bucket} \
- `if [ -n "$username" ]; then echo -u $username; fi` \
- `if [ -n "$password" ]; then echo -P $password; fi` \
- `if [ -n "$num_cycles" ]; then echo -c $num_cycles; fi` \
- `if [ -n "$min_size" ]; then echo -m $min_size; fi` \
- `if [ -n "$max_size" ]; then echo -M $max_size; fi` \
- `if [ -n "$ratio" ]; then echo -r $ratio; fi`
- parameters:
- base_url:
- description: base URL (http or couchbases) and list of hosts/port to connect to, including trailing slash
- defaultValue: $brooklyn:config("base_url")
- bucket:
- description: bucket to use
- defaultValue: default
- username:
- description: username to authenticate to the bucket
- password:
- description: password to authenticate to the bucket
- num_cycles:
- description: number of iterations to run
- defaultValue: 1
- min_size:
- description: minimum payload size
- defaultValue: 50
- max_size:
- description: maximum payload size
- defaultValue: 5120
- ratio:
- description: "specify SET/GET command ratio (default: 33, i.e. 33% SETs and 67% GETs)"
- defaultValue: 33
-
-# For CentOS, use the following launch command:
-# launch.command: |
-# sudo wget -O/etc/yum.repos.d/couchbase.repo http://packages.couchbase.com/rpm/couchbase-centos55-x86_64.repo
-# sudo yum check-update
-# sudo yum install -y libcouchbase2-libevent libcouchbase-devel libcouchbase2-bin
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.ini
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.ini b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.ini
deleted file mode 100644
index f9dfc64..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.ini
+++ /dev/null
@@ -1,17 +0,0 @@
-[#ftl]
-#
-[couchdb]
-database_dir = ${driver.runDir}
-view_index_dir = ${driver.runDir}
-uri_file = ${driver.runDir}/couch.uri
-
-[httpd]
-port = ${entity.httpPort?c}
-bind_address = 0.0.0.0
-
-[ssl]
-port = ${entity.httpsPort?c}
-
-[log]
-file = ${driver.runDir}/couch.log
-level = info
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.uri
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.uri b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.uri
deleted file mode 100644
index 0997fc7..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/couchdb/couch.uri
+++ /dev/null
@@ -1,2 +0,0 @@
-[#ftl]
-http://${driver.hostname}:${entity.httpPort?c}/
\ No newline at end of file
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/hazelcast/hazelcast-brooklyn.xml
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/hazelcast/hazelcast-brooklyn.xml b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/hazelcast/hazelcast-brooklyn.xml
deleted file mode 100644
index 2f4a263..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/hazelcast/hazelcast-brooklyn.xml
+++ /dev/null
@@ -1,64 +0,0 @@
-[#ftl]
-<?xml version="1.0" encoding="UTF-8"?>
-
-<hazelcast xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:schemaLocation="http://www.hazelcast.com/schema/config
- http://www.hazelcast.com/schema/config/hazelcast-config-3.5.xsd"
- xmlns="http://www.hazelcast.com/schema/config">
-
- <properties>
- <property name="hazelcast.discovery.enabled">true</property>
- </properties>
-
- <group>
- <name>${entity.groupName}</name>
- <password>${entity.groupPassword}</password>
- </group>
- <management-center enabled="false">http://localhost:8080/mancenter</management-center>
- <network>
- <port auto-increment="true" port-count="100">${entity.nodePort?c}</port>
- <outbound-ports>
- <!--
- Allowed port range when connecting to other nodes.
- 0 or * means use system provided port.
- -->
- <ports>0</ports>
- </outbound-ports>
-
- <join>
- <multicast enabled="false" />
-
- <tcp-ip enabled="true">
- [#list driver.hazelcastNodesList as member]
- <member>${member}</member>
- [/#list]
- </tcp-ip>
- <aws enabled="false" />
- </join>
-
- <ssl enabled="false"/>
- <socket-interceptor enabled="false"/>
-
- </network>
- <partition-group enabled="false"/>
-
- <map name="default">
- <in-memory-format>BINARY</in-memory-format>
- <backup-count>1</backup-count>
- <async-backup-count>0</async-backup-count>
- <time-to-live-seconds>0</time-to-live-seconds>
- <max-idle-seconds>0</max-idle-seconds>
- <eviction-policy>NONE</eviction-policy>
- <max-size policy="PER_NODE">0</max-size>
- <eviction-percentage>25</eviction-percentage>
- <min-eviction-check-millis>100</min-eviction-check-millis>
- <merge-policy>com.hazelcast.map.merge.PutIfAbsentMapMergePolicy</merge-policy>
- </map>
-
- <serialization>
- <portable-version>0</portable-version>
- </serialization>
-
- <services enable-defaults="true"/>
-
-</hazelcast>
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default-mongod.conf
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default-mongod.conf b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default-mongod.conf
deleted file mode 100644
index e7f02fd..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default-mongod.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# Default configuration for a mongod process. The use of noprealloc and smallfiles
-# mean this configuration file should not be used in a production environment.
-
-quiet = false
-
-noprealloc = true
-smallfiles = true
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default.conf
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default.conf b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default.conf
deleted file mode 100644
index c3c279f..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/default.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-# Default Brooklyn configuration for a MongoDB process.
-quiet = false
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/mongodb_win.yaml
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/mongodb_win.yaml b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/mongodb_win.yaml
deleted file mode 100644
index 3892eb6..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/mongodb_win.yaml
+++ /dev/null
@@ -1,46 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-
-name: mongodb
-location:
- jclouds:aws-ec2:
- region: us-west-2
- imageNameRegex: Windows_Server-2012-R2_RTM-English-64Bit-Base-.*
- imageOwner: 801119661308
- hardwareId: m3.medium
- useJcloudsSshInit: false
- templateOptions: {mapNewVolumeToDeviceName: ["/dev/sda1", 100, true]}
-services:
-- type: org.apache.brooklyn.entity.software.base.VanillaWindowsProcess
- id: mongodb
- brooklyn.config:
- templates.install:
- classpath://org/apache/brooklyn/entity/nosql/mongodb/win/install_mongodb.ps1: "C:\\install_mongodb.ps1"
- classpath://org/apache/brooklyn/entity/nosql/mongodb/win/configure_mongodb.ps1: "C:\\configure_mongodb.ps1"
- classpath://org/apache/brooklyn/entity/nosql/mongodb/win/launch_mongodb.ps1: "C:\\launch_mongodb.ps1"
- classpath://org/apache/brooklyn/entity/nosql/mongodb/win/stop_mongodb.ps1: "C:\\stop_mongodb.ps1"
- classpath://org/apache/brooklyn/entity/nosql/mongodb/win/checkrunning_mongodb.ps1: "C:\\checkrunning_mongodb.ps1"
- install.command: powershell -command "C:\\install_mongodb.ps1"
- customize.command: powershell -command "C:\\configure_mongodb.ps1"
- launch.command: powershell -command "C:\\launch_mongodb.ps1"
- stop.command: powershell -command "C:\\stop_mongodb.ps1"
- checkRunning.command: powershell -command "C:\\checkrunning_mongodb.ps1"
-
- mongodb.download.url: https://fastdl.mongodb.org/win32/mongodb-win32-x86_64-2008plus-ssl-3.0.6-signed.msi
- mongodb.instance.name: Instance1
- provisioning.properties:
- required.ports: 27017
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/checkrunning_mongodb.ps1
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/checkrunning_mongodb.ps1 b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/checkrunning_mongodb.ps1
deleted file mode 100644
index da9e97c..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/checkrunning_mongodb.ps1
+++ /dev/null
@@ -1,30 +0,0 @@
-[#ftl]
-#!ps1
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-$ErrorActionPreference = "Stop"
-
-$serviceName = "MongoDB${config['mongodb.instance.name']}"
-
-$service = Get-Service -Name $serviceName
-if ($service.Status -ne "Running"){
- Write-Host $ServiceName " service is not running"
- exit 1
-}
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/configure_mongodb.ps1
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/configure_mongodb.ps1 b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/configure_mongodb.ps1
deleted file mode 100644
index d687eea..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/configure_mongodb.ps1
+++ /dev/null
@@ -1,31 +0,0 @@
-[#ftl]
-#!ps1
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-$ErrorActionPreference = "Stop"
-
-netsh advfirewall firewall add rule name=MongoDB dir=in protocol=tcp action=allow localport=27017 remoteip=any profile=any
-
-New-Item c:\data\db -type directory -force
-New-Item c:\data\log -type directory -force
-
-set serviceName=MongoDB${config['mongodb.instance.name']}
-
-& 'C:\Program Files\MongoDB\Server\3.0\bin\mongod' '--rest' '--dbpath=C:\data\db' '--logpath=c:\data\log\service.log' '--install' '--serviceName=MongoDB${config['mongodb.instance.name']}' '--serviceDisplayName=MongoDB${config['mongodb.instance.name']}'
\ No newline at end of file
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/install_mongodb.ps1
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/install_mongodb.ps1 b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/install_mongodb.ps1
deleted file mode 100644
index 679a3e9..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/install_mongodb.ps1
+++ /dev/null
@@ -1,32 +0,0 @@
-[#ftl]
-#!ps1
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-$ErrorActionPreference = "Stop"
-
-$Path = "C:\InstallTemp"
-New-Item -ItemType Directory -Force -Path $Path
-
-$Url = "${config['mongodb.download.url']}"
-$Dl = [System.IO.Path]::Combine($Path, "installer.msi")
-$WebClient = New-Object System.Net.WebClient
-$WebClient.DownloadFile( $Url, $Dl )
-
-Start-Process "msiexec" -ArgumentList '/qn','/i',$Dl -RedirectStandardOutput ( [System.IO.Path]::Combine($Path, "stdout.txt") ) -RedirectStandardError ( [System.IO.Path]::Combine($Path, "stderr.txt") ) -Wait
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/launch_mongodb.ps1
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/launch_mongodb.ps1 b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/launch_mongodb.ps1
deleted file mode 100644
index 50749a7..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/launch_mongodb.ps1
+++ /dev/null
@@ -1,26 +0,0 @@
-[#ftl]
-#!ps1
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-$ErrorActionPreference = "Stop"
-
-$serviceName = "MongoDB${config['mongodb.instance.name']}"
-
-Start-Service $serviceName
http://git-wip-us.apache.org/repos/asf/brooklyn-library/blob/02abbab0/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/stop_mongodb.ps1
----------------------------------------------------------------------
diff --git a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/stop_mongodb.ps1 b/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/stop_mongodb.ps1
deleted file mode 100644
index 0071a5e..0000000
--- a/brooklyn-library/software/nosql/src/main/resources/org/apache/brooklyn/entity/nosql/mongodb/win/stop_mongodb.ps1
+++ /dev/null
@@ -1,27 +0,0 @@
-[#ftl]
-#!ps1
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-$ErrorActionPreference = "Stop"
-
-$serviceName = "MongoDB${config['mongodb.instance.name']}"
-
-Stop-Service $serviceName
-