You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@pulsar.apache.org by GitBox <gi...@apache.org> on 2022/10/25 08:04:59 UTC
[GitHub] [pulsar] tisonkun opened a new pull request, #18188: [improve][doc] cherry-pick cpp client docs installation section
tisonkun opened a new pull request, #18188:
URL: https://github.com/apache/pulsar/pull/18188
Master issue: #17917
See https://github.com/apache/pulsar/issues/17917#issuecomment-1290146425.
### Documentation
- [x] `doc` <!-- Your PR contains doc changes. Please attach the local preview screenshots (run `sh start.sh` at `pulsar/site2/website`) to your PR description, or else your PR might not get merged. -->
- [ ] `doc-required` <!-- Your PR changes impact docs and you will update later -->
- [ ] `doc-not-needed` <!-- Your PR changes do not impact docs -->
- [ ] `doc-complete` <!-- Docs have been already added -->
cc @momo-jun @Anonymitaet
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] tisonkun commented on pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
tisonkun commented on PR #18188:
URL: https://github.com/apache/pulsar/pull/18188#issuecomment-1292178042
@Anonymitaet are there any more required reviewers for this patch?
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] momo-jun commented on a diff in pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
momo-jun commented on code in PR #18188:
URL: https://github.com/apache/pulsar/pull/18188#discussion_r1006318037
##########
site2/website/versioned_docs/version-2.9.x/client-libraries-cpp.md:
##########
@@ -5,318 +5,111 @@ sidebar_label: "C++"
original_id: client-libraries-cpp
---
-You can use Pulsar C++ client to create Pulsar producers and consumers in C++.
+````mdx-code-block
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+````
-All the methods in producer, consumer, and reader of a C++ client are thread-safe.
+You can use a Pulsar C++ client to create producers, consumers, and readers.
-## Supported platforms
+All the methods in producer, consumer, and reader of a C++ client are thread-safe. You can read the [API docs](/api/cpp) for the C++ client.
-Pulsar C++ client is supported on **Linux** ,**macOS** and **Windows** platforms.
+## Installation
-[Doxygen](http://www.doxygen.nl/)-generated API docs for the C++ client are available [here](/api/cpp).
+Use one of the following methods to install a Pulsar C++ client.
-## System requirements
+### Brew
-You need to install the following components before using the C++ client:
-
-* [CMake](https://cmake.org/)
-* [Boost](http://www.boost.org/)
-* [Protocol Buffers](https://developers.google.com/protocol-buffers/) >= 3
-* [libcurl](https://curl.se/libcurl/)
-* [Google Test](https://github.com/google/googletest)
-
-## Linux
-
-### Compilation
-
-1. Clone the Pulsar repository.
-
-```shell
-
-$ git clone https://github.com/apache/pulsar
+Use [Homebrew](http://brew.sh/) to install the latest tagged version with the library and headers:
+```bash
+brew install libpulsar
```
-2. Install all necessary dependencies.
+### Deb
-```shell
+1. Download any one of the Deb packages:
-$ apt-get install cmake libssl-dev libcurl4-openssl-dev liblog4cxx-dev \
- libprotobuf-dev protobuf-compiler libboost-all-dev google-mock libgtest-dev libjsoncpp-dev
+<Tabs>
+<TabItem value="client">
+```bash
+wget @pulsar:deb:client@
```
-3. Compile and install [Google Test](https://github.com/google/googletest).
-
-```shell
-
-# libgtest-dev version is 1.18.0 or above
-$ cd /usr/src/googletest
-$ sudo cmake .
-$ sudo make
-$ sudo cp ./googlemock/libgmock.a ./googlemock/gtest/libgtest.a /usr/lib/
-
-# less than 1.18.0
-$ cd /usr/src/gtest
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgtest.a /usr/lib
+This package contains shared libraries `libpulsar.so` and `libpulsarnossl.so`.
-$ cd /usr/src/gmock
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgmock.a /usr/lib
+</TabItem>
+<TabItem value="client-devel">
+```bash
+wget @pulsar:deb:client-devel@
```
-4. Compile the Pulsar client library for C++ inside the Pulsar repository.
+This package contains static libraries: `libpulsar.a`, `libpulsarwithdeps.a` and C/C++ headers.
-```shell
+</TabItem>
+</Tabs>
-$ cd pulsar-client-cpp
-$ cmake .
-$ make
+2. Install the package using the following command:
+```bash
+apt install ./apache-pulsar-client*.deb
```
-After you install the components successfully, the files `libpulsar.so` and `libpulsar.a` are in the `lib` folder of the repository. The tools `perfProducer` and `perfConsumer` are in the `perf` directory.
-
-### Install Dependencies
-
-> Since 2.1.0 release, Pulsar ships pre-built RPM and Debian packages. You can download and install those packages directly.
+Now, you can see Pulsar C++ client libraries installed under the `/usr/lib` directory.
-After you download and install RPM or DEB, the `libpulsar.so`, `libpulsarnossl.so`, `libpulsar.a`, and `libpulsarwithdeps.a` libraries are in your `/usr/lib` directory.
+### RPM
-By default, they are built in code path `${PULSAR_HOME}/pulsar-client-cpp`. You can build with the command below.
+1. Download any one of the RPM packages:
- `cmake . -DBUILD_TESTS=OFF -DLINK_STATIC=ON && make pulsarShared pulsarSharedNossl pulsarStatic pulsarStaticWithDeps -j 3`.
-
-These libraries rely on some other libraries. If you want to get detailed version of dependencies, see [RPM](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/rpm/Dockerfile) or [DEB](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/deb/Dockerfile) files.
-
-1. `libpulsar.so` is a shared library, containing statically linked `boost` and `openssl`. It also dynamically links all other necessary libraries. You can use this Pulsar library with the command below.
+<Tabs>
+<TabItem value="client">
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.so -I/usr/local/ssl/include
-
+wget @pulsar:dist_rpm:client@
```
-2. `libpulsarnossl.so` is a shared library, similar to `libpulsar.so` except that the libraries `openssl` and `crypto` are dynamically linked. You can use this Pulsar library with the command below.
-
-```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarnossl.so -lssl -lcrypto -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
-```
+This package contains shared libraries: `libpulsar.so` and `libpulsarnossl.so`.
-3. `libpulsar.a` is a static library. You need to load dependencies before using this library. You can use this Pulsar library with the command below.
+</TabItem>
+<TabItem value="client-debuginfo">
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib -lboost_system -lboost_regex -lcurl -lprotobuf -lzstd -lz
-
+wget @pulsar:dist_rpm:client-debuginfo@
```
-4. `libpulsarwithdeps.a` is a static library, based on `libpulsar.a`. It is archived in the dependencies of `libboost_regex`, `libboost_system`, `libcurl`, `libprotobuf`, `libzstd` and `libz`. You can use this Pulsar library with the command below.
-
-```bash
+This package contains debug symbols for `libpulsar.so`
Review Comment:
```suggestion
This package contains debug symbols for `libpulsar.so`.
```
##########
site2/website/versioned_docs/version-2.8.x/client-libraries-cpp.md:
##########
@@ -5,267 +5,111 @@ sidebar_label: "C++"
original_id: client-libraries-cpp
---
-You can use Pulsar C++ client to create Pulsar producers and consumers in C++.
+````mdx-code-block
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+````
-All the methods in producer, consumer, and reader of a C++ client are thread-safe.
+You can use a Pulsar C++ client to create producers, consumers, and readers.
-## Supported platforms
+All the methods in producer, consumer, and reader of a C++ client are thread-safe. You can read the [API docs](/api/cpp) for the C++ client.
-Pulsar C++ client is supported on **Linux** and **macOS** platforms.
+## Installation
-[Doxygen](http://www.doxygen.nl/)-generated API docs for the C++ client are available [here](/api/cpp).
+Use one of the following methods to install a Pulsar C++ client.
-## System requirements
+### Brew
-You need to install the following components before using the C++ client:
-
-* [CMake](https://cmake.org/)
-* [Boost](http://www.boost.org/)
-* [Protocol Buffers](https://developers.google.com/protocol-buffers/) 2.6
-* [libcurl](https://curl.haxx.se/libcurl/)
-* [Google Test](https://github.com/google/googletest)
-
-## Linux
-
-### Compilation
-
-1. Clone the Pulsar repository.
-
-```shell
-
-$ git clone https://github.com/apache/pulsar
-
-```
-
-2. Install all necessary dependencies.
-
-```shell
-
-$ apt-get install cmake libssl-dev libcurl4-openssl-dev liblog4cxx-dev \
- libprotobuf-dev protobuf-compiler libboost-all-dev google-mock libgtest-dev libjsoncpp-dev
-
-```
-
-3. Compile and install [Google Test](https://github.com/google/googletest).
-
-```shell
-
-# libgtest-dev version is 1.18.0 or above
-$ cd /usr/src/googletest
-$ sudo cmake .
-$ sudo make
-$ sudo cp ./googlemock/libgmock.a ./googlemock/gtest/libgtest.a /usr/lib/
-
-# less than 1.18.0
-$ cd /usr/src/gtest
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgtest.a /usr/lib
-
-$ cd /usr/src/gmock
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgmock.a /usr/lib
-
-```
-
-4. Compile the Pulsar client library for C++ inside the Pulsar repository.
-
-```shell
-
-$ cd pulsar-client-cpp
-$ cmake .
-$ make
-
-```
-
-After you install the components successfully, the files `libpulsar.so` and `libpulsar.a` are in the `lib` folder of the repository. The tools `perfProducer` and `perfConsumer` are in the `perf` directory.
-
-### Install Dependencies
-
-> Since 2.1.0 release, Pulsar ships pre-built RPM and Debian packages. You can download and install those packages directly.
-
-After you download and install RPM or DEB, the `libpulsar.so`, `libpulsarnossl.so`, `libpulsar.a`, and `libpulsarwithdeps.a` libraries are in your `/usr/lib` directory.
-
-By default, they are built in code path `${PULSAR_HOME}/pulsar-client-cpp`. You can build with the command below.
-
- `cmake . -DBUILD_TESTS=OFF -DLINK_STATIC=ON && make pulsarShared pulsarSharedNossl pulsarStatic pulsarStaticWithDeps -j 3`.
-
-These libraries rely on some other libraries. If you want to get detailed version of dependencies, see [RPM](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/rpm/Dockerfile) or [DEB](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/deb/Dockerfile) files.
-
-1. `libpulsar.so` is a shared library, containing statically linked `boost` and `openssl`. It also dynamically links all other necessary libraries. You can use this Pulsar library with the command below.
+Use [Homebrew](http://brew.sh/) to install the latest tagged version with the library and headers:
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.so -I/usr/local/ssl/include
-
-```
-
-2. `libpulsarnossl.so` is a shared library, similar to `libpulsar.so` except that the libraries `openssl` and `crypto` are dynamically linked. You can use this Pulsar library with the command below.
-
-```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarnossl.so -lssl -lcrypto -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+brew install libpulsar
```
-3. `libpulsar.a` is a static library. You need to load dependencies before using this library. You can use this Pulsar library with the command below.
-
-```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib -lboost_system -lboost_regex -lcurl -lprotobuf -lzstd -lz
+### Deb
-```
+1. Download any one of the Deb packages:
-4. `libpulsarwithdeps.a` is a static library, based on `libpulsar.a`. It is archived in the dependencies of `libboost_regex`, `libboost_system`, `libcurl`, `libprotobuf`, `libzstd` and `libz`. You can use this Pulsar library with the command below.
+<Tabs>
+<TabItem value="client">
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarwithdeps.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+wget @pulsar:deb:client@
```
-The `libpulsarwithdeps.a` does not include library openssl related libraries `libssl` and `libcrypto`, because these two libraries are related to security. It is more reasonable and easier to use the versions provided by the local system to handle security issues and upgrade libraries.
-
-### Install RPM
+This package contains shared libraries `libpulsar.so` and `libpulsarnossl.so`.
-1. Download an RPM package from the links in the table.
-
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:dist_rpm:client@) | [asc](@pulsar:dist_rpm:client@.asc), [sha512](@pulsar:dist_rpm:client@.sha512) |
-| [client-debuginfo](@pulsar:dist_rpm:client-debuginfo@) | [asc](@pulsar:dist_rpm:client-debuginfo@.asc), [sha512](@pulsar:dist_rpm:client-debuginfo@.sha512) |
-| [client-devel](@pulsar:dist_rpm:client-devel@) | [asc](@pulsar:dist_rpm:client-devel@.asc), [sha512](@pulsar:dist_rpm:client-devel@.sha512) |
-
-2. Install the package using the following command.
+</TabItem>
+<TabItem value="client-devel">
```bash
-
-$ rpm -ivh apache-pulsar-client*.rpm
-
+wget @pulsar:deb:client-devel@
```
-After you install RPM successfully, Pulsar libraries are in the `/usr/lib` directory.
-
-### Install Debian
+This package contains static libraries: `libpulsar.a`, `libpulsarwithdeps.a` and C/C++ headers.
-1. Download a Debian package from the links in the table.
+</TabItem>
+</Tabs>
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:deb:client@) | [asc](@pulsar:dist_deb:client@.asc), [sha512](@pulsar:dist_deb:client@.sha512) |
-| [client-devel](@pulsar:deb:client-devel@) | [asc](@pulsar:dist_deb:client-devel@.asc), [sha512](@pulsar:dist_deb:client-devel@.sha512) |
-
-2. Install the package using the following command.
+2. Install the package using the following command:
```bash
-
-$ apt install ./apache-pulsar-client*.deb
-
+apt install ./apache-pulsar-client*.deb
```
-After you install DEB successfully, Pulsar libraries are in the `/usr/lib` directory.
-
-### Build
-
-> If you want to build RPM and Debian packages from the latest master, follow the instructions below. You should run all the instructions at the root directory of your cloned Pulsar repository.
-
-There are recipes that build RPM and Debian packages containing a
-statically linked `libpulsar.so` / `libpulsarnossl.so` / `libpulsar.a` / `libpulsarwithdeps.a` with all required dependencies.
-
-To build the C++ library packages, you need to build the Java packages first.
-
-```shell
-
-mvn install -DskipTests
-
-```
+Now, you can see Pulsar C++ client libraries installed under the `/usr/lib` directory.
-#### RPM
+### RPM
-To build the RPM inside a Docker container, use the command below. The RPMs are in the `pulsar-client-cpp/pkg/rpm/RPMS/x86_64/` path.
+1. Download any one of the RPM packages:
-```shell
-
-pulsar-client-cpp/pkg/rpm/docker-build-rpm.sh
+<Tabs>
+<TabItem value="client">
+```bash
+wget @pulsar:dist_rpm:client@
```
-| Package name | Content |
-|-----|-----|
-| pulsar-client | Shared library `libpulsar.so` and `libpulsarnossl.so` |
-| pulsar-client-devel | Static library `libpulsar.a`, `libpulsarwithdeps.a`and C++ and C headers |
-| pulsar-client-debuginfo | Debug symbols for `libpulsar.so` |
-
-#### Debian
+This package contains shared libraries: `libpulsar.so` and `libpulsarnossl.so`.
-To build Debian packages, enter the following command.
-
-```shell
-
-pulsar-client-cpp/pkg/deb/docker-build-deb.sh
+</TabItem>
+<TabItem value="client-debuginfo">
+```bash
+wget @pulsar:dist_rpm:client-debuginfo@
```
-Debian packages are created in the `pulsar-client-cpp/pkg/deb/BUILD/DEB/` path.
-
-| Package name | Content |
-|-----|-----|
-| pulsar-client | Shared library `libpulsar.so` and `libpulsarnossl.so` |
-| pulsar-client-dev | Static library `libpulsar.a`, `libpulsarwithdeps.a` and C++ and C headers |
-
-## MacOS
-
-### Compilation
-
-1. Clone the Pulsar repository.
-
-```shell
+This package contains debug symbols for `libpulsar.so`
Review Comment:
```suggestion
This package contains debug symbols for `libpulsar.so`.
```
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] tisonkun commented on pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
tisonkun commented on PR #18188:
URL: https://github.com/apache/pulsar/pull/18188#issuecomment-1292847607
@momo-jun fixed.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] momo-jun commented on a diff in pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
momo-jun commented on code in PR #18188:
URL: https://github.com/apache/pulsar/pull/18188#discussion_r1006318125
##########
site2/website/versioned_docs/version-2.7.5/client-libraries-cpp.md:
##########
@@ -5,161 +5,111 @@ sidebar_label: "C++"
original_id: client-libraries-cpp
---
-You can use Pulsar C++ client to create Pulsar producers and consumers in C++.
+````mdx-code-block
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+````
-All the methods in producer, consumer, and reader of a C++ client are thread-safe.
+You can use a Pulsar C++ client to create producers, consumers, and readers.
-## Supported platforms
+All the methods in producer, consumer, and reader of a C++ client are thread-safe. You can read the [API docs](/api/cpp) for the C++ client.
-Pulsar C++ client is supported on **Linux** and **MacOS** platforms.
+## Installation
-[Doxygen](http://www.doxygen.nl/)-generated API docs for the C++ client are available [here](/api/cpp).
+Use one of the following methods to install a Pulsar C++ client.
-## Linux
+### Brew
-> Since 2.1.0 release, Pulsar ships pre-built RPM and Debian packages. You can download and install those packages directly.
-
-Four kind of libraries `libpulsar.so` / `libpulsarnossl.so` / `libpulsar.a` / `libpulsarwithdeps.a` are included in your `/usr/lib` after rpm/deb download and install.
-By default, they are build under code path `${PULSAR_HOME}/pulsar-client-cpp`, using command
- `cmake . -DBUILD_TESTS=OFF -DLINK_STATIC=ON && make pulsarShared pulsarSharedNossl pulsarStatic pulsarStaticWithDeps -j 3`
-These libraries rely on some other libraries, if you want to get detailed version of dependencies libraries, please reference [these](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/rpm/Dockerfile) [files](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/deb/Dockerfile).
-
-1. `libpulsar.so` is the Shared library, it contains statically linked `boost` and `openssl`, and will also dynamically link all other needed libraries.
-The command the when use this pulsar library is like this:
-
-```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.so -I/usr/local/ssl/include
-
-```
-
-2. `libpulsarnossl.so` is the Shared library that similar to `libpulsar.so` except that the library `openssl` and `crypto` are dynamically linked.
-The command the when use this pulsar library is like this:
+Use [Homebrew](http://brew.sh/) to install the latest tagged version with the library and headers:
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarnossl.so -lssl -lcrypto -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+brew install libpulsar
```
-3. `libpulsar.a` is the Static library, it need to load some dependencies library when using it.
-The command the when use this pulsar library is like this:
-
-```bash
+### Deb
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib -lboost_system -lboost_regex -lcurl -lprotobuf -lzstd -lz
-
-```
+1. Download any one of the Deb packages:
-4. `libpulsarwithdeps.a` is the Static library, base on `libpulsar.a`, and archived in the dependencies libraries of `libboost_regex`, `libboost_system`, `libcurl`, `libprotobuf`, `libzstd` and `libz`,
-The command the when use this pulsar library is like this:
+<Tabs>
+<TabItem value="client">
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarwithdeps.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+wget @pulsar:deb:client@
```
-`libpulsarwithdeps.a` does not include library openssl related libraries: `libssl` and `libcrypto`, because these 2 library is related to security,
-by using user local system provided version is more reasonable, and more easy for user to handling security issue and library upgrade.
-
-### Install RPM
-
-1. Download a RPM package from the links in the table.
-
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:dist_rpm:client@) | [asc](@pulsar:dist_rpm:client@.asc), [sha512](@pulsar:dist_rpm:client@.sha512) |
-| [client-debuginfo](@pulsar:dist_rpm:client-debuginfo@) | [asc](@pulsar:dist_rpm:client-debuginfo@.asc), [sha512](@pulsar:dist_rpm:client-debuginfo@.sha512) |
-| [client-devel](@pulsar:dist_rpm:client-devel@) | [asc](@pulsar:dist_rpm:client-devel@.asc), [sha512](@pulsar:dist_rpm:client-devel@.sha512) |
+This package contains shared libraries `libpulsar.so` and `libpulsarnossl.so`.
-2. Install the package using the following command.
+</TabItem>
+<TabItem value="client-devel">
```bash
-
-$ rpm -ivh apache-pulsar-client*.rpm
-
+wget @pulsar:deb:client-devel@
```
-After install, Pulsar libraries will be placed under `/usr/lib`.
-
-### Install Debian
+This package contains static libraries: `libpulsar.a`, `libpulsarwithdeps.a` and C/C++ headers.
-1. Download a Debian package from the links in the table.
-
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:deb:client@) | [asc](@pulsar:dist_deb:client@.asc), [sha512](@pulsar:dist_deb:client@.sha512) |
-| [client-devel](@pulsar:deb:client-devel@) | [asc](@pulsar:dist_deb:client-devel@.asc), [sha512](@pulsar:dist_deb:client-devel@.sha512) |
+</TabItem>
+</Tabs>
2. Install the package using the following command:
```bash
-
-$ apt install ./apache-pulsar-client*.deb
-
+apt install ./apache-pulsar-client*.deb
```
-After install, Pulsar libraries will be placed under `/usr/lib`.
-
-### Build
-
-> If you want to build RPM and Debian packages from the latest master, follow the instructions below. All the instructions are run at the root directory of your cloned Pulsar repository.
+Now, you can see Pulsar C++ client libraries installed under the `/usr/lib` directory.
-There are recipes that build RPM and Debian packages containing a
-statically linked `libpulsar.so` / `libpulsarnossl.so` / `libpulsar.a` / `libpulsarwithdeps.a` with all the required
-dependencies.
+### RPM
-To build the C++ library packages, build the Java packages first.
+1. Download any one of the RPM packages:
-```shell
-
-mvn install -DskipTests
+<Tabs>
+<TabItem value="client">
+```bash
+wget @pulsar:dist_rpm:client@
```
-#### RPM
+This package contains shared libraries: `libpulsar.so` and `libpulsarnossl.so`.
-```shell
-
-pulsar-client-cpp/pkg/rpm/docker-build-rpm.sh
+</TabItem>
+<TabItem value="client-debuginfo">
+```bash
+wget @pulsar:dist_rpm:client-debuginfo@
```
-This builds the RPM inside a Docker container and it leaves the RPMs in `pulsar-client-cpp/pkg/rpm/RPMS/x86_64/`.
+This package contains debug symbols for `libpulsar.so`
Review Comment:
```suggestion
This package contains debug symbols for `libpulsar.so`.
```
##########
site2/website/versioned_docs/version-2.10.x/client-libraries-cpp.md:
##########
@@ -5,341 +5,111 @@ sidebar_label: "C++"
original_id: client-libraries-cpp
---
-You can use Pulsar C++ client to create Pulsar producers and consumers in C++.
+````mdx-code-block
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+````
-All the methods in producer, consumer, and reader of a C++ client are thread-safe.
+You can use a Pulsar C++ client to create producers, consumers, and readers.
-## Supported platforms
+All the methods in producer, consumer, and reader of a C++ client are thread-safe. You can read the [API docs](/api/cpp) for the C++ client.
-Pulsar C++ client is supported on **Linux** ,**macOS** and **Windows** platforms.
+## Installation
-[Doxygen](http://www.doxygen.nl/)-generated API docs for the C++ client are available [here](/api/cpp).
+Use one of the following methods to install a Pulsar C++ client.
+### Brew
-## Linux
-
-:::note
-
-You can choose one of the following installation methods based on your needs: Compilation, Install RPM or Install Debian.
-
-:::
-
-### Compilation
-
-#### System requirements
-
-You need to install the following components before using the C++ client:
-
-* [CMake](https://cmake.org/)
-* [Boost](http://www.boost.org/)
-* [Protocol Buffers](https://developers.google.com/protocol-buffers/) >= 3
-* [libcurl](https://curl.se/libcurl/)
-* [Google Test](https://github.com/google/googletest)
-
-1. Clone the Pulsar repository.
-
-```shell
-
-$ git clone https://github.com/apache/pulsar
-
-```
-
-2. Install all necessary dependencies.
-
-```shell
-
-$ apt-get install cmake libssl-dev libcurl4-openssl-dev liblog4cxx-dev \
- libprotobuf-dev protobuf-compiler libboost-all-dev google-mock libgtest-dev libjsoncpp-dev
-
-```
-
-3. Compile and install [Google Test](https://github.com/google/googletest).
-
-```shell
-
-# libgtest-dev version is 1.18.0 or above
-$ cd /usr/src/googletest
-$ sudo cmake .
-$ sudo make
-$ sudo cp ./googlemock/libgmock.a ./googlemock/gtest/libgtest.a /usr/lib/
-
-# less than 1.18.0
-$ cd /usr/src/gtest
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgtest.a /usr/lib
-
-$ cd /usr/src/gmock
-$ sudo cmake .
-$ sudo make
-$ sudo cp libgmock.a /usr/lib
-
-```
-
-4. Compile the Pulsar client library for C++ inside the Pulsar repository.
-
-```shell
-
-$ cd pulsar-client-cpp
-$ cmake .
-$ make
-
-```
-
-After you install the components successfully, the files `libpulsar.so` and `libpulsar.a` are in the `lib` folder of the repository. The tools `perfProducer` and `perfConsumer` are in the `perf` directory.
-
-### Install Dependencies
-
-> Since 2.1.0 release, Pulsar ships pre-built RPM and Debian packages. You can download and install those packages directly.
-
-After you download and install RPM or DEB, the `libpulsar.so`, `libpulsarnossl.so`, `libpulsar.a`, and `libpulsarwithdeps.a` libraries are in your `/usr/lib` directory.
-
-By default, they are built in code path `${PULSAR_HOME}/pulsar-client-cpp`. You can build with the command below.
-
- `cmake . -DBUILD_TESTS=OFF -DLINK_STATIC=ON && make pulsarShared pulsarSharedNossl pulsarStatic pulsarStaticWithDeps -j 3`.
-
-These libraries rely on some other libraries. If you want to get detailed version of dependencies, see [RPM](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/rpm/Dockerfile) or [DEB](https://github.com/apache/pulsar/blob/master/pulsar-client-cpp/pkg/deb/Dockerfile) files.
-
-1. `libpulsar.so` is a shared library, containing statically linked `boost` and `openssl`. It also dynamically links all other necessary libraries. You can use this Pulsar library with the command below.
+Use [Homebrew](http://brew.sh/) to install the latest tagged version with the library and headers:
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.so -I/usr/local/ssl/include
-
-```
-
-2. `libpulsarnossl.so` is a shared library, similar to `libpulsar.so` except that the libraries `openssl` and `crypto` are dynamically linked. You can use this Pulsar library with the command below.
-
-```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarnossl.so -lssl -lcrypto -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+brew install libpulsar
```
-3. `libpulsar.a` is a static library. You need to load dependencies before using this library. You can use this Pulsar library with the command below.
+### Deb
-```bash
+1. Download any one of the Deb packages:
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsar.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib -lboost_system -lboost_regex -lcurl -lprotobuf -lzstd -lz
-
-```
-
-4. `libpulsarwithdeps.a` is a static library, based on `libpulsar.a`. It is archived in the dependencies of `libboost_regex`, `libboost_system`, `libcurl`, `libprotobuf`, `libzstd` and `libz`. You can use this Pulsar library with the command below.
+<Tabs>
+<TabItem value="client">
```bash
-
- g++ --std=c++11 PulsarTest.cpp -o test /usr/lib/libpulsarwithdeps.a -lssl -lcrypto -ldl -lpthread -I/usr/local/ssl/include -L/usr/local/ssl/lib
-
+wget @pulsar:deb:client@
```
-The `libpulsarwithdeps.a` does not include library openssl related libraries `libssl` and `libcrypto`, because these two libraries are related to security. It is more reasonable and easier to use the versions provided by the local system to handle security issues and upgrade libraries.
-
-### Install RPM
+This package contains shared libraries `libpulsar.so` and `libpulsarnossl.so`.
-1. Download an RPM package from the links in the table.
-
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:dist_rpm:client@) | [asc](@pulsar:dist_rpm:client@.asc), [sha512](@pulsar:dist_rpm:client@.sha512) |
-| [client-debuginfo](@pulsar:dist_rpm:client-debuginfo@) | [asc](@pulsar:dist_rpm:client-debuginfo@.asc), [sha512](@pulsar:dist_rpm:client-debuginfo@.sha512) |
-| [client-devel](@pulsar:dist_rpm:client-devel@) | [asc](@pulsar:dist_rpm:client-devel@.asc), [sha512](@pulsar:dist_rpm:client-devel@.sha512) |
-
-2. Install the package using the following command.
+</TabItem>
+<TabItem value="client-devel">
```bash
-
-$ rpm -ivh apache-pulsar-client*.rpm
-
-```
-
-After you install RPM successfully, Pulsar libraries are in the `/usr/lib` directory, for example：
-
-```bash
-
-lrwxrwxrwx 1 root root 18 Dec 30 22:21 libpulsar.so -> libpulsar.so.2.9.1
-lrwxrwxrwx 1 root root 23 Dec 30 22:21 libpulsarnossl.so -> libpulsarnossl.so.2.9.1
-
+wget @pulsar:deb:client-devel@
```
-:::note
+This package contains static libraries: `libpulsar.a`, `libpulsarwithdeps.a` and C/C++ headers.
-If you get the error that `libpulsar.so: cannot open shared object file: No such file or directory` when starting Pulsar client, you may need to run `ldconfig` first.
+</TabItem>
+</Tabs>
-:::
-
-2. Install the GCC and g++ using the following command, otherwise errors would occur in installing Node.js.
+2. Install the package using the following command:
```bash
-
-$ sudo yum -y install gcc automake autoconf libtool make
-$ sudo yum -y install gcc-c++
-
+apt install ./apache-pulsar-client*.deb
```
-### Install Debian
+Now, you can see Pulsar C++ client libraries installed under the `/usr/lib` directory.
-1. Download a Debian package from the links in the table.
+### RPM
-| Link | Crypto files |
-|------|--------------|
-| [client](@pulsar:deb:client@) | [asc](@pulsar:dist_deb:client@.asc), [sha512](@pulsar:dist_deb:client@.sha512) |
-| [client-devel](@pulsar:deb:client-devel@) | [asc](@pulsar:dist_deb:client-devel@.asc), [sha512](@pulsar:dist_deb:client-devel@.sha512) |
+1. Download any one of the RPM packages:
-2. Install the package using the following command.
+<Tabs>
+<TabItem value="client">
```bash
-
-$ apt install ./apache-pulsar-client*.deb
-
+wget @pulsar:dist_rpm:client@
```
-After you install DEB successfully, Pulsar libraries are in the `/usr/lib` directory.
-
-### Build
+This package contains shared libraries: `libpulsar.so` and `libpulsarnossl.so`.
-> If you want to build RPM and Debian packages from the latest master, follow the instructions below. You should run all the instructions at the root directory of your cloned Pulsar repository.
-
-There are recipes that build RPM and Debian packages containing a
-statically linked `libpulsar.so` / `libpulsarnossl.so` / `libpulsar.a` / `libpulsarwithdeps.a` with all required dependencies.
-
-To build the C++ library packages, you need to build the Java packages first.
-
-```shell
-
-mvn install -DskipTests
-
-```
-
-#### RPM
-
-To build the RPM inside a Docker container, use the command below. The RPMs are in the `pulsar-client-cpp/pkg/rpm/RPMS/x86_64/` path.
-
-```shell
-
-pulsar-client-cpp/pkg/rpm/docker-build-rpm.sh
-
-```
-
-| Package name | Content |
-|-----|-----|
-| pulsar-client | Shared library `libpulsar.so` and `libpulsarnossl.so` |
-| pulsar-client-devel | Static library `libpulsar.a`, `libpulsarwithdeps.a`and C++ and C headers |
-| pulsar-client-debuginfo | Debug symbols for `libpulsar.so` |
-
-#### Debian
-
-To build Debian packages, enter the following command.
-
-```shell
-
-pulsar-client-cpp/pkg/deb/docker-build-deb.sh
-
-```
-
-Debian packages are created in the `pulsar-client-cpp/pkg/deb/BUILD/DEB/` path.
-
-| Package name | Content |
-|-----|-----|
-| pulsar-client | Shared library `libpulsar.so` and `libpulsarnossl.so` |
-| pulsar-client-dev | Static library `libpulsar.a`, `libpulsarwithdeps.a` and C++ and C headers |
-
-## MacOS
-
-### Compilation
-
-1. Clone the Pulsar repository.
-
-```shell
-
-$ git clone https://github.com/apache/pulsar
-
-```
-
-2. Install all necessary dependencies.
-
-```shell
-
-# OpenSSL installation
-$ brew install openssl
-$ export OPENSSL_INCLUDE_DIR=/usr/local/opt/openssl/include/
-$ export OPENSSL_ROOT_DIR=/usr/local/opt/openssl/
-
-# Protocol Buffers installation
-$ brew install protobuf boost boost-python log4cxx
-# If you are using python3, you need to install boost-python3
-
-# Google Test installation
-$ git clone https://github.com/google/googletest.git
-$ cd googletest
-$ git checkout release-1.12.1
-$ cmake .
-$ make install
-
-```
-
-3. Compile the Pulsar client library in the repository that you cloned.
-
-```shell
-
-$ cd pulsar-client-cpp
-$ cmake .
-$ make
-
-```
-
-### Install `libpulsar`
-
-Pulsar releases are available in the [Homebrew](https://brew.sh/) core repository. You can install the C++ client library with the following command. The package is installed with the library and headers.
-
-```shell
-
-brew install libpulsar
+</TabItem>
+<TabItem value="client-debuginfo">
+```bash
+wget @pulsar:dist_rpm:client-debuginfo@
```
-## Windows (64-bit)
-
-### Compilation
-
-1. Clone the Pulsar repository.
+This package contains debug symbols for `libpulsar.so`
Review Comment:
```suggestion
This package contains debug symbols for `libpulsar.so`.
```
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] momo-jun merged pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
momo-jun merged PR #18188:
URL: https://github.com/apache/pulsar/pull/18188
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org
[GitHub] [pulsar] Anonymitaet commented on pull request #18188: [improve][doc] cherry-pick cpp client docs installation section
Posted by GitBox <gi...@apache.org>.
Anonymitaet commented on PR #18188:
URL: https://github.com/apache/pulsar/pull/18188#issuecomment-1292926331
> @Anonymitaet are there any more required reviewers for this patch?
@tisonkun I guess no since we already have eyes on both technical and tw perspectives.
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscribe@pulsar.apache.org
For queries about this service, please contact Infrastructure at:
users@infra.apache.org