You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@tomcat.apache.org by jf...@apache.org on 2002/05/26 23:41:20 UTC
cvs commit: jakarta-tomcat-connectors/jk/xdocs/images jakarta.gif mod_jk.jpeg pixel.gif tomcat.ico
jfclere 02/05/26 14:41:20
Added: jk/xdocs AJPv13.xml menu.idx style.css style.xsl
jk/xdocs/images jakarta.gif mod_jk.jpeg pixel.gif tomcat.ico
Log:
Add the xml version of the old Ajp13 protocol description.
Revision Changes Path
1.1 jakarta-tomcat-connectors/jk/xdocs/AJPv13.xml
Index: AJPv13.xml
===================================================================
<?xml version="1.0"?>
<document title="Apache JServ Protocol version 1.3">
<properties>
<title>Apache JServ Protocol version 1.3</title>
<author email="danmil@shore.net">danmil@shore.net</author>
</properties>
<section name="Intro">
<p>
The original document was written by
Dan Milstein, <author email="danmil@shore.net">danmil@shore.net</author>
on December 2000. The present document is generated out of an xml file
to allow a more easy integration in the Tomcat documentation.
</p>
<p>
This describes the Apache JServ Protocol version 1.3 (hereafter
<b>ajp13</b>). There is, apparently, no current documentation of how the
protocol works. This document is an attempt to remedy that, in order to
make life easier for maintainers of mod_jk, and for anyone who wants to
port the protocol somewhere (into jakarta 4.x, for example).
</p>
</section>
<section name="author">
<p>
I am not one of the designers of this protocol -- I believe that Gal
Shachor was the original designer. Everything in this document is derived
from the actual implementation I found in the tomcat 3.x code. I hope it
is useful, but I can't make any grand claims to perfect accuracy. I also
don't know why certain design decisions were made. Where I was able, I've
offered some possible justifications for certain choices, but those are
only my guesses. In general, the C code which Shachor wrote is very clean
and comprehensible (if almost totally undocumented). I've cleaned up the
Java code, and I think it's reasonably readable.
</p>
</section>
<section name="Design Goals">
<p>
According to email from Gal Shachor to the jakarta-dev mailing list,
the original goals of <b>mod_jk</b> (and thus <b>ajp13</b>) were to extend
<b>mod_jserv</b> and <b>ajp12</b> by (I am only including the goals which
relate to communication between the web server and the servlet container):
<ul>
<li> Increasing performance (speed, specifically). </li>
<li> Adding support for SSL, so that <code>isSecure()</code> and
<code>geScheme()</code> will function correctly within the servlet
container. The client certificates and cipher suite will be
available to servlets as request attributes. </li>
</ul>
</p>
</section>
<section name="Overview of the protocol">
<p>
The <b>ajp13</b> protocol is packet-oriented. A binary format was
presumably chosen over the more readable plain text for reasons of
performance. The web server communicates with the servlet container over
TCP connections. To cut down on the expensive process of socket creation,
the web server will attempt to maintain persistent TCP connections to the
servlet container, and to reuse a connection for multiple request/response
cycles.
</p><p>
Once a connection is assigned to a particular request, it will not be
used for any others until the request-handling cycle has terminated. In
other words, requests are not multiplexed over connections. This makes
for much simpler code at either end of the connection, although it does
cause more connections to be open at once.
</p><p>
Once the web server has opened a connection to the servlet container,
the connection can be in one of the following states:
</p><p>
<ul>
<li> Idle <br/> No request is being handled over this connection. </li>
<li> Assigned <br/> The connecton is handling a specific request.</li>
</ul>
</p><p>
Once a connection is assigned to handle a particular request, the basic
request informaton (e.g. HTTP headers, etc) is sent over the connection in
a highly condensed form (e.g. common strings are encoded as integers).
Details of that format are below in Request Packet Structure. If there is a
body to the request (content-length > 0), that is sent in a separate
packet immediately after.
</p><p>
At this point, the servlet container is presumably ready to start
processing the request. As it does so, it can send the
following messages back to the web server:
<ul>
<li>SEND_HEADERS <br/>Send a set of headers back to the browser.</li>
<li>SEND_BODY_CHUNK <br/>Send a chunk of body data back to the browser.</li>
<li>GET_BODY_CHUNK <br/>Get further data from the request if it hasn't all
been transferred yet. This is necessary because the packets have a fixed
maximum size and arbitrary amounts of data can be included the body of a
request (for uploaded files, for example). (Note: this is unrelated to
HTTP chunked tranfer).</li>
<li>END_RESPONSE <br/> Finish the request-handling cycle.</li>
</ul>
</p><p>
Each message is accompanied by a differently formatted packet of data. See
Response Packet Structures below for details.
</p>
</section>
<section name="Basic Packet Structure">
<p>
There is a bit of an XDR heritage to this protocol, but it differs in
lots of ways (no 4 byte alignment, for example).
</p><p>
Byte order: I am not clear about the endian-ness of the individual
bytes. I'm guessing the bytes are little-endian, because that's what XDR
specifies, and I'm guessing that sys/socket library is magically making
that so (on the C side). If anyone with a better knowledge of socket calls
can step in, that would be great.
</p><p>
There are four data types in the protocol: bytes, booleans, integers and
strings.
<dl>
<dt><b>Byte</b></dt>
<dd>A single byte.</dd>
<dt><b>Boolean</b></dt>
<dd>A single byte, 1 = true, 0 = false. Using other non-zero values as
true (i.e. C-style) may work in some places, but it won't in
others.</dd>
<dt><b>Integer</b></dt>
<dd>A number in the range of 0 to 2^16 (32768). Stored in 2 bytes with
the high-order byte first.</dd>
<dt><b>String</b></dt>
<dd>A variable-sized string (length bounded by 2^16). Encoded with the
length packed into two bytes first, followed by the string (including the
terminating '\0'). Note that the encoded length does <b>not</b> include
the trailing '\0' -- it is like <code>strlen</code>. This is a touch
confusing on the Java side, which is littered with odd autoincrement
statements to skip over these terminators. I believe the reason this was
done was to allow the C code to be extra efficient when reading strings
which the servlet container is sending back -- with the terminating \0
character, the C code can pass around references into a single buffer,
without copying. If the \0 was missing, the C code would have to copy
things out in order to get its notion of a string.</dd>
</dl>
</p>
<p>
<b>Packet Size</b> <br/> According to much of the code, the max packet
size is 8 * 1024 bytes (8K). The actual length of the packet is encoded in the
header.
</p>
<p>
<b>Packet Headers</b>
<br/> Packets sent from the server to the container begin with
<code>0x1234</code>. Packets sent from the container to the server begin
with <code>AB</code> (that's the ASCII code for A followed by the ASCII
code for B). After those first two bytes, there is an integer (encoded as
above) with the length of the payload. Although this might suggest that
the maximum payload could be as large as 2^16, in fact, the code sets the
maximum to be 8K.
<table>
<tr>
<td6><b>Packet Format (Server->Container)</b></td6>
</tr>
<tr>
<td>Byte</td>
<td>0</td>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4...(n+3)</td>
</tr>
<tr>
<td>Contents</td>
<td>0x12</td>
<td>0x34</td>
<td2>Data Length (n)</td2>
<td>Data</td>
</tr>
</table>
<table>
<tr>
<td6><b>Packet Format (Container->Server)</b></td6>
</tr>
<tr>
<td>Byte</td>
<td>0</td>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4...(n+3)</td>
</tr>
<tr>
<td>Contents</td>
<td>A</td>
<td>B</td>
<td2>Data Length (n)</td2>
<td>Data</td>
</tr>
</table>
<A NAME="prefix-codes"></A> For most packets, the first byte of the
payload encodes the type of message. The exception is for request body
packets sent from the server to the container -- they are sent with a
standard packet header (0x1234 and then length of the packet), but without
any prefix code after that (this seems like a mistake to me).
</p><p>
The web server can send the following messages to the servlet container:
<table>
<tr>
<td>Code</td>
<td>Type of Packet</td>
<td>Meaning</td>
</tr>
<tr>
<td>2</td>
<td>Forward Request</td>
<td>Begin the request-processing cycle with the following data</td>
</tr>
<tr>
<td>7</td>
<td>Shutdown</td>
<td>The web server asks the container to shut itself down.</td>
</tr>
</table>
</p>
<p>The servlet container can send the following types of messages to the web
server:
<table>
<tr>
<td>Code</td>
<td>Type of Packet</td>
<td>Meaning</td>
</tr>
<tr>
<td>3</td>
<td>Send Body Chunk</td>
<td>Send a chunk of the body from the servlet container to the web
server (and presumably, onto the browser). </td>
</tr>
<tr>
<td>4</td>
<td>Send Headers</td>
<td>Send the response headers from the servlet container to the web
server (and presumably, onto the browser).</td>
</tr>
<tr>
<td>5</td>
<td>End Response</td>
<td>Marks the end of the response (and thus the request-handling cycle).</td>
</tr>
<tr>
<td>6</td>
<td>Get Body Chunk</td>
<td>Get further data from the request if it hasn't all been transferred
yet.</td>
</tr>
</table>
</p>
<p>
Each of the above messages has a different internal structure, detailed below.
</p>
</section>
<section name="Request Packet Structure">
<p>
For messages from the server to the container of type "Forward Request":
</p><p>
<source>
AJP13_FORWARD_REQUEST :=
prefix_code 2
method (byte)
protocol (string)
req_uri (string)
remote_addr (string)
remote_host (string)
server_name (string)
server_port (integer)
is_ssl (boolean)
num_headers (integer)
request_headers *(req_header_name req_header_value)
?context (byte string)
?servlet_path (byte string)
?remote_user (byte string)
?auth_type (byte string)
?query_string (byte string)
?jvm_route (byte string)
?ssl_cert (byte string)
?ssl_cipher (byte string)
?ssl_session (byte string)
?attributes *(attribute_name attribute_value)
request_terminator (byte)
req_header_name :=
sc_req_header_name | (string) [see below for how this is parsed]
sc_req_header_name := 0xA0 (byte)
req_header_value := (string)
attribute_name := (string)
attribute_value := (string)
request_terminator := 0xFF
</source>
</p><p>
Not that the all-important header is "content-length', because it
determines whether or not the container looks for another packet
immediately.
</p><p>
Details of above
</p><p>
<b>request_prefix</b><br/>
For all requests, this will be 2.
See above for details on other <A HREF="#prefix-codes">prefix codes</A>.
</p><p>
<b>method</b><br/>
The HTTP method, encoded as a single byte:
<source>
OPTIONS 1
GET 2
HEAD 3
POST 4
PUT 5
DELETE 6
TRACE 7
PROPFIND 8
PROPPATCH 9
MKCOL 10
COPY 11
MOVE 12
LOCK 13
UNLOCK 14
ACL 15
REPORT 16
VERSION-CONTROL 17
CHECKIN 18
CHECKOUT 19
UNCHECKOUT 20
SEARCH 21
</source>
</p><p>
<b>protocol, req_uri, remote_addr, remote_host, server_name, server_port, is_ssl</b><br/>
These are all fairly self-explanatory. Each of these is required, and
will be sent for every request.
</p><p>
<b>Headers</b><br/>
First, the number of headers is encoded. Then, a series of header
name / value pairs follows. Common header names are encoded as integers,
to save space. If the header name is not in the list of basic headers,
it is encoded normally (as a string, with prefixed length). The list of
common headers and their codes is as follows (all are case-sensitive):
</p><p>
<source>
accept 0xA001
accept-charset 0xA002
accept-encoding 0xA003
accept-language 0xA004
authorization 0xA005
connection 0xA006
content-type 0xA007
content-length 0xA008
cookie 0xA009
cookie2 0xA00A
host 0xA00B
pragma 0xA00C
referer 0xA00D
user-agent 0xA00E
</source>
</p><p>
The Java code that reads this grabs the first two-byte integer, and, if
<A NAME="header_encoding">it sees an '0xA0'</A> in the most significant
byte, it uses the integer in the second byte as an index into an array of
header names. If the first byte is not '0xA0', it assumes that the
two-byte integer is the length of a string, which is then read in.
</p><p>
This works on the assumption that no header names will have length
greater than 0x9999 (==0xA000 - 1), which is perfectly reasonable, though
somewhat arbitrary. (If you, like me, started to think about the cookie
spec here, and about how long headers can get, fear not -- this limit is
on header <b>names</b> not header <b>values</b>. It seems unlikely that
unmanageably huge header names will be showing up in the HTTP spec any time
soon).
</p><p>
<b>Note:</b> The <code>content-length</code> header is extremely
important. If it is present and non-zero, the container assumes that
the request has a body (a POST request, for example), and immediately
reads a separate packet off the input stream to get that body.
</p>
<p>
<b>Optional Information</b><br/>
The list of attributes prefixed with a <code>?</code>
(e.g. <code>?context</code>) are all optional. For each, there is a
single byte code to indicate the type of attribute, and then a string to
give its value. They can be sent in any order (thogh the C code always
sends them in the order listed below). A special terminating code is
sent to signal the end of the list of optional attributes. The list of
byte codes is:
</p><p>
<source>
context 1 [Not currently implemented]
servlet_path 2 [Not currently implemented]
remote_user 3
auth_type 4
query_string 5
jvm_route 6
ssl_cert 7
ssl_cipher 8
ssl_session 9
req_attribute 10
terminator 0xFF
</source>
</p><p>
The <code>context</code> and <code>servlet_path</code> are not currently
set by the C code, and most of the Java code completely ignores whatever
is sent over for those fields (and some of it will actually break if a
string is sent along after one of those codes). I don't know if this is
a bug or an unimplemented feature or just vestigial code, but it's
missing from both sides of the connection.
</p><p>
The <code>remote_user</code> and <code>auth_type</code> presumably refer
to HTTP-level authentication, and communicate the remote user's username
and the type of authentication used to establish their identity (e.g. Basic,
Digest). I'm not clear on why the password isn't also sent, but I don't
know HTTP authentication inside and out.
</p><p>
The <code>query_string</code>, <code>ssl_cert</code>,
<code>ssl_cipher</code>, and <code>ssl_session</code> refer to the
corresponding pieces of HTTP and HTTPS.
</p><p>
The <code>jvm_route</code>, as I understand it, is used to support sticky
sessions -- associating a user's sesson with a particular Tomcat instance
in the presence of multiple, load-balancing servers. I don't know the
details.
</p><p>
Beyond this list of basic attributes, any number of other attributes can
be sent via the <code>req_attribute</code> code (10). A pair of strings
to represent the attribute name and value are sent immediately after each
instance of that code. Environment values are passed in via this method.
</p><p>
Finally, after all the attributes have been sent, the attribute terminator,
0xFF, is sent. This signals both the end of the list of attributes, and
also then end of the Request Packets as a whole.
</p><p>
The server can also send a <code>shutdown</code> packet. To ensure some
basic security, the container will only actually do the shutdown if the
request comes from the same machine on which it's hosted.
</p>
</section>
<section name="Response Packet Structure">
<p>
For messages which the container can send back to the server.
<source>
AJP13_SEND_BODY_CHUNK :=
prefix_code 3
chunk_length (integer)
chunk *(byte)
AJP13_SEND_HEADERS :=
prefix_code 4
http_status_code (integer)
http_status_msg (string)
num_headers (integer)
response_headers *(res_header_name header_value)
res_header_name :=
sc_res_header_name | (string) [see below for how this is parsed]
sc_res_header_name := 0xA0 (byte)
header_value := (string)
AJP13_END_RESPONSE :=
prefix_code 5
reuse (boolean)
AJP13_GET_BODY_CHUNK :=
prefix_code 6
requested_length (integer)
</source>
</p>
<p>
Details:
</p><p>
<b>Send Body Chunk</b><br/>
The chunk is basically binary data, and is sent directly back to the browser.
</p><p>
<b>Send Headers</b><br/>
The status code and message are the usual HTTP things (e.g. "200" and "OK").
The response header names are encoded the same way the request header names are.
See <A HREF="#header_encoding">above</A> for details about how the the
codes are distinguished from the strings. The codes for common headers are:
</p><p>
<source>
Content-Type 0xA001
Content-Language 0xA002
Content-Length 0xA003
Date 0xA004
Last-Modified 0xA005
Location 0xA006
Set-Cookie 0xA007
Set-Cookie2 0xA008
Servlet-Engine 0xA009
Status 0xA00A
WWW-Authenticate 0xA00B
</source>
</p><p>
After the code or the string header name, the header value is immediately
encoded.
</p><p>
<b>End Response</b><br/>
Signals the end of this request-handling cycle. If the
<code>reuse</code> flag is true (==1), this TCP connection can now be used to
handle new incoming requests. If <code>reuse</code> is false (anything
other than 1 in the actual C code), the connection should be closed.
</p><p>
<b>Get Body Chunk</b><br/>
The container asks for more data from the request (if the body was
too large to fit in the first packet sent over). The server will send a
body packet back with an amount of data which is the minimum of the
<code>request_length</code>, the maximum send body size (XXX), and the
number of bytes actually left to send from the request body.
<br/>
If there is no more data in the body (i.e. the servlet container is
trying to read past the end of the body), the server will send back an
"empty" packet, whch is a body packet with a payload length of 0.
</p>
</section>
<section name="Questions I Have">
<p> What happens if the request headers > max packet size? There is no
provision to send a second packet of request headers in case there are more
than 8K (I think this is correctly handled for response headers, though I'm
not certain). I don't know if there is a way to get more than 8K worth of
data into that initial set of request headers, but I'll bet there is
(combine long cookies with long ssl information and a lot of environment
variables, and you should hit 8K easily). I think the connector would just
fail before trying to send any headers in this case, but I'm not certain.</p>
<p> What about authentication? There doesn't seem to be any authentication
of the connection between the web server and the container. This strikes
me as potentially dangerous.</p>
</section>
</document>
1.1 jakarta-tomcat-connectors/jk/xdocs/menu.idx
Index: menu.idx
===================================================================
<?xml version="1.0"?>
<index>
<document href="AJPv13.xml"/>
</index>
1.1 jakarta-tomcat-connectors/jk/xdocs/style.css
Index: style.css
===================================================================
body {
margin: 0;
font-family: "verdana", "tahoma", "arial", "helvetica", sans-serif;
}
td.logo {
background-color: #666666;
border-style: none;
}
td.nil {
font-size: 1px;
}
td.head {
background-color: #999999;
border-style: solid;
border-width: 1px;
border-color: #cccccc #666666 #666666 #cccccc;
font-weight: bold;
font-size: smaller;
color: #cccccc;
padding: 2px;
text-align: right;
}
a.head:link {
text-decoration: none;
color: #cccccc;
}
a.head:visited {
text-decoration: none;
color: #cccccc;
}
a.head:active {
text-decoration: underline;
color: #ffffff;
}
a.head:hover {
text-decoration: underline;
color: #ffffff;
}
table.menu {
background-color: #cccccc;
border-style: solid;
border-width: 1px;
border-color: #cccccc #999999 #999999 #999999;
font-weight: bold;
font-size: smaller;
color: #000000;
padding: 2px;
text-align: left;
margin-left: 5px;
}
a.menu:link {
text-decoration: none;
color: #333333;
}
a.menu:visited {
text-decoration: none;
color: #333333;
}
a.menu:active {
text-decoration: underline;
color: #000000;
}
a.menu:hover {
text-decoration: underline;
color: #000000;
}
td.body {
background-color: #ffffff;
border-style: none;
padding: 4px;
text-align: justify;
}
td.section {
background-color: #666666;
border-style: none;
font-weight: bold;
font-size: bigger;
color: #ffffff;
padding: 0px;
text-align: left;
}
p.section {
background-color: #ffffff;
border-style: none;
color: #000000;
margin-left: 20px;
margin-right: 10px;
text-align: justify;
}
p.todo {
background-color: #ffffff;
border-style: none;
color: #000000;
margin-left: 20px;
margin-right: 10px;
text-align: justify;
font-size: smaller;
}
p.screen {
background-color: #ffffff;
border-style: none;
color: #000000;
margin-left: 10px;
margin-right: 0px;
text-align: left;
}
div.screen {
margin: 10px 0px 10px 20px;
font-size: smaller;
color: #666666;
}
em.screen {
font-weight: normal;
font-style: normal;
color: #666666;
}
b.screen {
font-weight: normal;
font-style: normal;
color: #0000ff;
}
b.code {
font-weight: normal;
font-style: normal;
color: #808000;
}
1.1 jakarta-tomcat-connectors/jk/xdocs/style.xsl
Index: style.xsl
===================================================================
<?xml version="1.0"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns="http://www.w3.org/TR/xhtml1/strict">
<!--
Let's start by declaring HOW this stylesheet must behave.
-->
<xsl:output method="html" indent="no"
doctype-public="-//W3C//DTD HTML 4.01//EN"
doctype-system="http://www.w3.org/TR/html4/strict.dtd"/>
<!--
Match the ROOT of the source document and process its "document" element.
-->
<xsl:template match="/">
<xsl:apply-templates select="document"/>
</xsl:template>
<!--
Match the roote "document" element, let's prepare the layout of the whole
page.
-->
<xsl:template match="document">
<html>
<!--
This is the page header, we want a title from this document title
the <meta> copyright statement and all authors in "meta" headers.
-->
<head>
<title>
<xsl:if test="string-length(description/text()) = 0">
<xsl:value-of select="@title"/>
</xsl:if>
<xsl:value-of select="description/text()"/>
</title>
<meta name="copyright" content="1999-2002 The Apache Software Foundation"/>
<xsl:for-each select="author">
<meta name="author" content="text()"/>
<meta name="author" content="@email"/>
</xsl:for-each>
<link rel="stylesheet" type="text/css" href="style.css"/>
<link rel="shortcut icon" href="images/tomcat.ico"/>
</head>
<!--
This describes the layout of the page
-->
<body bgcolor="#ffffff" text="#000000" alink="#666666" vlink="#333333" link="#666666">
<a name="TOP"/>
<table border="0" cellspacing="0" cellpadding="0" width="100%">
<!--
An empty row (thank you stupid IE).
-->
<tr height="1">
<td width="150" bgcolor="#ffffff" height="1" class="nil">
<img src="images/pixel.gif" border="0" width="150" height="1" vspace="0" hspace="0"/>
</td>
<td width="*" bgcolor="#ffffff" height="1" class="nil">
<img src="images/pixel.gif" border="0" width="570" height="1" vspace="0" hspace="0"/>
</td>
</tr>
<!--
Our first row contains the Jakarta and the WebApp logos.
-->
<tr>
<td bgcolor="#ffffff" class="logo" colspan="2" width="*">
<table border="0" cellspacing="0" cellpadding="0" width="100%">
<tr>
<td align="left">
<img src="images/jakarta.gif" border="0" width="270" height="75" align="left"/>
</td>
<td align="right">
<img src="images/mod_jk.jpeg" border="0" width="400" height="75" align="right"/>
</td>
</tr>
</table>
</td>
</tr>
<!--
A Turbine-style bar with links to the ASF, Jakarta and Tomcat.
-->
<tr>
<td bgcolor="#999999" class="head" align="right" width="*" colspan="2">
<nobr>
<a class="head" href="http://www.apache.org/">
<xsl:text>Apache Software Foundation</xsl:text>
</a> |
<a class="head" href="http://jakarta.apache.org/">
<xsl:text>Jakarta Project</xsl:text>
</a> |
<a class="head" href="http://jakarta.apache.org/tomcat/">
<xsl:text>Apache Tomcat</xsl:text>
</a>
</nobr>
</td>
</tr>
<!--
Sidebar menu in a nested table and main content.
-->
<tr>
<td bgcolor="#ffffff" width="150" valign="top">
<!--
This is the sidebar menu, we have links to all documents specified
in "menu.idx", and if this is the current document, we go deeper
and write an index of the sections as well.
-->
<table border="0" width="150" cellspacing="0" cellpadding="0" class="menu">
<!-- Empty row, thanks IE -->
<tr height="1">
<td width="10" bgcolor="#cccccc" height="1" class="nil">
<img src="images/pixel.gif" border="0" width="10" height="1" vspace="0" hspace="0"/>
</td>
<td width="140" bgcolor="#cccccc" height="1" class="nil">
<img src="images/pixel.gif" border="0" width="140" height="1" vspace="0" hspace="0"/>
</td>
</tr>
<!--
All the files we want to have processed in the final pages are
stored (in order) in a file called "menu.idx". We set a variable
name with the current URL, and then we process each "document"
within the index.
-->
<xsl:variable name="root" select="document-location(.)"/>
<xsl:for-each select="document('menu.idx')/index/document">
<tr>
<td bgcolor="#cccccc" width="150" colspan="2">
<nobr>
<a class="menu">
<xsl:call-template name="converturi">
<xsl:with-param name="href" select="@href"/>
</xsl:call-template>
</a>
</nobr>
</td>
</tr>
<!--
Slightly more complicated, we use the document-location function
and compare against it to see whether we are in the same file or
not. If we actually are, we expand to the "section" level.
-->
<xsl:if test="$root = document-location(document(@href))">
<xsl:for-each select="document(@href)/document/section">
<tr>
<td bgcolor="#cccccc" width="10"/>
<td bgcolor="#cccccc" width="140">
<a class="menu" href="#section_{position()}">
<xsl:value-of select="@name"/>
</a>
</td>
</tr>
</xsl:for-each>
</xsl:if>
</xsl:for-each>
<!--
The last thing to put down in the index are the API docs,
both for C and for Java
-->
<tr>
<td bgcolor="#cccccc" width="150" colspan="2">
<nobr>
<a class="menu" href="./api-java/index.html">Java API Documentation</a>
</nobr>
</td>
</tr>
<tr>
<td bgcolor="#cccccc" width="150" colspan="2">
<nobr>
<a class="menu" href="./api-c/">C API Documentation</a>
</nobr>
</td>
</tr>
</table>
</td>
<!--
Done with the sidebar, now, do we want some content as well or WHAT?
-->
<td bgcolor="#ffffff" width="*" valign="top" class="body">
<xsl:apply-templates select="section"/>
</td>
</tr>
</table>
</body>
</html>
</xsl:template>
<!--
Match the "author" tag only in mode "header" (meaning that we have to
process it for the HTML <head> element.
-->
<xsl:template match="author" mode="header">
<meta name="author" content="{text()}"/>
<meta name="email" content="{@email}"/>
</xsl:template>
<!--
Present a canonical representation of an author.
-->
<xsl:template match="author">
<a href="mailto:{@email}"><xsl:value-of select="text()"/></a>
</xsl:template>
<xsl:template match="section">
<a name="section_{position()}">
<table border="0" cellspacing="0" cellpadding="0" width="100%">
<tr>
<td bgcolor="#666666" class="section" valign="top" align="left">
<img src="images/corner.gif" valign="top" align="left" hspace="0" vspace="0" border="0"/>
<xsl:if test="string-length(description/text()) = 0">
<xsl:value-of select="@name"/>
</xsl:if>
<xsl:value-of select="description/text()"/>
</td>
</tr>
</table>
</a>
<xsl:apply-templates select="p|ul|img|screen|todo"/>
<br/>
</xsl:template>
<xsl:template match="todo">
<p class="todo">
This paragraph has not been written yet, but <b>you</b> can contribute to it.
<xsl:if test="string-length(@note) > 0">
The original author left a note attached to this TO-DO item:
<b><xsl:value-of select="@note"/></b>
</xsl:if>
</p>
</xsl:template>
<xsl:template match="p">
<p class="section"><xsl:apply-templates select="author|code|source|table|ul|br|b|a|text()"/></p>
</xsl:template>
<xsl:template match="b">
<b><font color="#333333"><xsl:apply-templates select="text()"/></font></b>
</xsl:template>
<xsl:template match="br">
<br/>
</xsl:template>
<xsl:template match="img">
<p>
<div align="center">
<xsl:value-of select="@alt"/><br/>
<img src="{@src}" alt="{@alt}" vspace="0" hspace="0" border="0"/>
</div>
</p>
</xsl:template>
<xsl:template match="ul">
<ul><xsl:apply-templates select="li"/></ul>
</xsl:template>
<xsl:template match="li">
<li><xsl:apply-templates select="br|b|a|text()"/></li>
</xsl:template>
<!-- JFC added -->
<xsl:template match="table">
<table border="1"><xsl:apply-templates select="tr"/></table>
</xsl:template>
<xsl:template match="tr">
<tr><xsl:apply-templates select="td|td15|td13|td6|td5|td3|td2"/></tr>
</xsl:template>
<xsl:template match="td">
<td><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td15">
<td colspan="15"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td13">
<td colspan="13"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td6">
<td colspan="6"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td5">
<td colspan="5"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td3">
<td colspan="3"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="td2">
<td colspan="2"><xsl:apply-templates select="b|a|text()"/></td>
</xsl:template>
<xsl:template match="source">
<pre><xsl:apply-templates select="text()"/></pre>
</xsl:template>
<xsl:template match="code">
<b class="code"><xsl:apply-templates select="text()"/></b>
</xsl:template>
<!-- end JFC -->
<xsl:template match="screen">
<p class="screen">
<div align="center">
<table width="80%" border="1" cellspacing="0" cellpadding="2" bgcolor="#cccccc">
<tr>
<td bgcolor="#cccccc">
<xsl:apply-templates select="note|wait|type|read"/>
</td>
</tr>
</table>
</div>
</p>
</xsl:template>
<xsl:template match="note">
<div class="screen">
<xsl:value-of select="text()"/>
</div>
</xsl:template>
<xsl:template match="wait">
<div class="screen">[...]</div>
</xsl:template>
<xsl:template match="type">
<code>
<nobr>
<em class="screen">
<xsl:text>[user@host] ~</xsl:text>
<xsl:if test="string-length(@dir) > 0">
<xsl:text>/</xsl:text>
<xsl:value-of select="@dir"/>
</xsl:if>
<xsl:text> $ </xsl:text>
</em>
<xsl:if test="string-length(text()) > 0">
<b class="screen"><xsl:value-of select="text()"/></b>
</xsl:if>
</nobr>
</code>
<br/>
</xsl:template>
<xsl:template match="read">
<code>
<nobr>
<xsl:apply-templates select="text()|enter"/>
</nobr>
</code>
<br/>
</xsl:template>
<xsl:template match="enter">
<b class="screen"><xsl:value-of select="text()"/></b>
</xsl:template>
<xsl:template match="a">
<b>
<a>
<xsl:call-template name="converturi">
<xsl:with-param name="href" select="@href"/>
<xsl:with-param name="text" select="text()"/>
<xsl:with-param name="attr" select="'href'"/>
</xsl:call-template>
</a>
</b>
</xsl:template>
<!--
Convert the name of the matching "href" attribute (if needed) from
"file.xml#anchor" to "file.html#anchor", and insert the title of
the target document as the only text child of the resulting html
<a /> tag. (Of course, don't convert fully qualified URIs).
-->
<xsl:template name="converturi">
<xsl:param name="attr" select="'href'"/>
<xsl:param name="href" select="''"/>
<xsl:param name="text" select="''"/>
<xsl:choose>
<!--
If the "href" parameter contains ":" this is most definitely an URL,
therefore we need to quote it "as is" without translating its value.
The text is either supplied, or it's the value of the URL itself
(without the trailing anchor, if any).
-->
<xsl:when test="contains($href,':')">
<xsl:attribute name="{$attr}"><xsl:value-of select="$href"/></xsl:attribute>
<xsl:if test="string-length($text) = 0">
<xsl:choose>
<xsl:when test="contains($href,'#')">
<xsl:value-of select="substring-before($href,'#')"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$href"/>
</xsl:otherwise>
</xsl:choose>
</xsl:if>
<xsl:value-of select="$text"/>
</xsl:when>
<!--
Nope, we don't have a full URL, therefore we interpret this as a
relative hyperlink to another document. We need to translate its
name from "*.xml" to "*.html" (because this is how we convert the
names) and the text included in this will be the title of the
target document.
-->
<xsl:otherwise>
<!--
The "file" variable contains the part of the "href" before
the "#" character. Yes, the "file" name.
-->
<xsl:variable name="file">
<xsl:choose>
<xsl:when test="contains($href,'#')">
<xsl:value-of select="substring-before($href,'#')" />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$href" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<!--
Like "file" the "anchor" variable contains the part of the "href"
after the "#" character.
-->
<xsl:variable name="anchor">
<xsl:if test="contains($href,'#')">
<xsl:value-of select="'#'" />
<xsl:value-of select="substring-after($href,'#')" />
</xsl:if>
</xsl:variable>
<!--
Good, now we check if "file" ends in ".xml", if so, we replace that
with ".html", otherwise we keep its original value, then we add the
anchor we gathered before. We call this "target".
-->
<xsl:variable name="target">
<xsl:if test="string-length($file) > 0">
<xsl:choose>
<xsl:when test="substring($file,string-length($file)-3) = '.xml'">
<xsl:value-of select="substring($file,1,string-length($file)-3)"/>
<xsl:value-of select="'html'"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$file"/>
</xsl:otherwise>
</xsl:choose>
</xsl:if>
<xsl:value-of select="$anchor"/>
</xsl:variable>
<!--
Now, we want to set the attribute to contain the "target" variable.
-->
<xsl:attribute name="{$attr}">
<xsl:value-of select="$target"/>
</xsl:attribute>
<!--
To finish we want to set the body of this element: if we have "text"
the body of the element will be just that, otherwise, it will be
the "target" value (the translated href) if there was no text,
or the "title" of the target document if we actually translated
something
-->
<xsl:if test="string-length($text) = 0">
<xsl:choose>
<xsl:when test="$target = $href">
<xsl:value-of select="$file"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="document($file)/document/@title"/>
</xsl:otherwise>
</xsl:choose>
</xsl:if>
<xsl:value-of select="$text"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
1.1 jakarta-tomcat-connectors/jk/xdocs/images/jakarta.gif
<<Binary file>>
1.1 jakarta-tomcat-connectors/jk/xdocs/images/mod_jk.jpeg
<<Binary file>>
1.1 jakarta-tomcat-connectors/jk/xdocs/images/pixel.gif
<<Binary file>>
1.1 jakarta-tomcat-connectors/jk/xdocs/images/tomcat.ico
<<Binary file>>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: cvs commit: jakarta-tomcat-connectors/jk/xdocs/images jakarta.gif mod_jk.jpeg pixel.gif tomcat.ico
Posted by Gomez Henri <hg...@slib.fr>.
> jfclere 02/05/26 14:41:20
>
> Added: jk/xdocs AJPv13.xml menu.idx style.css style.xsl
> jk/xdocs/images jakarta.gif mod_jk.jpeg pixel.gif
> tomcat.ico
> Log:
> Add the xml version of the old Ajp13 protocol description.
Excellent works JF, will have now to port to xml
mod_jk how-to ;)
See you on monday :)
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>