You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@cloudstack.apache.org by ro...@apache.org on 2019/01/25 17:13:22 UTC
[cloudstack-documentation] 12/21: bridge section was missing (#12)
This is an automated email from the ASF dual-hosted git repository.
rohit pushed a commit to branch security-tls-config
in repository https://gitbox.apache.org/repos/asf/cloudstack-documentation.git
commit cfc18dffa6f18996529e7b0bcfe04d78105c03f2
Author: Andrija Panic <an...@users.noreply.github.com>
AuthorDate: Wed Nov 7 14:02:47 2018 +0100
bridge section was missing (#12)
network setup was completely missing the bridge sections - so added it.
---
source/quickinstallationguide/qig.rst | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/source/quickinstallationguide/qig.rst b/source/quickinstallationguide/qig.rst
index a45962b..2ce77f3 100644
--- a/source/quickinstallationguide/qig.rst
+++ b/source/quickinstallationguide/qig.rst
@@ -104,27 +104,43 @@ Connecting via the console you should login as root. Check the file
Unfortunately, this configuration will not permit you to connect to the
network, and is also unsuitable for our purposes with CloudStack. We want to
-configure that file so that it specifies the IP address, netmask, etc., as
-shown in the following example:
+configure that file so that it specifies the IP address, netmask, etc. We will
+edit the eth0 interface and make it part of bridge named "cloudbr0" as shown in the
+following example:
.. note::
You should not use the Hardware Address (aka the MAC address) from our
example for your configuration. It is network interface specific, so you
should keep the address already provided in the HWADDR directive.
+vi /etc/sysconfig/network-scripts/ifcfg-eth0
::
DEVICE=eth0
- HWADDR=52:54:00:B9:A6:C0
- NM_CONTROLLED=no
+ HWADDR=00:04:xx:xx:xx:xx
ONBOOT=yes
BOOTPROTO=none
+ TYPE=Ethernet
+ BRIDGE=cloudbr0
+
+vi /etc/sysconfig/network-scripts/ifcfg-cloudbr0
+
+::
+
+ DEVICE=cloudbr0
+ TYPE=Bridge
+ ONBOOT=yes
+ BOOTPROTO=none
+ IPV6INIT=no
+ IPV6_AUTOCONF=no
+ DELAY=5
IPADDR=172.16.10.2
NETMASK=255.255.255.0
GATEWAY=172.16.10.1
DNS1=8.8.8.8
DNS2=8.8.4.4
-
+ STP=yes
+
.. note::
IP Addressing - Throughout this document we are assuming that you will have
a /24 network for your CloudStack implementation. This can be any RFC 1918