You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by "S. Brüseke - proIO GmbH" <s....@proio.com> on 2015/05/28 15:33:15 UTC
enable local storage
Hi,
I installed new disks in some of our XenServer hosts and added the raid to the XenServer-host. Now I need to add this new storage to CS.
I enabled local storage for the zone, but I am still unable to see the new local storage as primary storage. Is there some kind of cron which needs to run before I see this storage on infrastructure tab in CS UI? Does the local storage needs to use a specific name or can I use a random name as name-label inside XenServer?
Mit freundlichen Grüßen / With kind regards,
Swen Brüseke
- proIO GmbH -
Geschäftsführer: Swen Brüseke
Sitz der Gesellschaft: Frankfurt am Main
USt-IdNr. DE 267 075 918
Registergericht: Frankfurt am Main - HRB 86239
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben,
informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet.
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in error) please notify
the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
Re: enable local storage
Posted by Rafael Weingärtner <ra...@gmail.com>.
I think they will not appear as a device in CS UI.
On Thu, May 28, 2015 at 10:33 AM, S. Brüseke - proIO GmbH <
s.brueseke@proio.com> wrote:
> Hi,
>
> I installed new disks in some of our XenServer hosts and added the raid to
> the XenServer-host. Now I need to add this new storage to CS.
> I enabled local storage for the zone, but I am still unable to see the new
> local storage as primary storage. Is there some kind of cron which needs to
> run before I see this storage on infrastructure tab in CS UI? Does the
> local storage needs to use a specific name or can I use a random name as
> name-label inside XenServer?
>
> Mit freundlichen Grüßen / With kind regards,
>
> Swen Brüseke
>
>
>
>
> - proIO GmbH -
> Geschäftsführer: Swen Brüseke
> Sitz der Gesellschaft: Frankfurt am Main
>
> USt-IdNr. DE 267 075 918
> Registergericht: Frankfurt am Main - HRB 86239
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen.
> Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> erhalten haben,
> informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
> Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
> nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information.
> If you are not the intended recipient (or have received this e-mail in
> error) please notify
> the sender immediately and destroy this e-mail.
> Any unauthorized copying, disclosure or distribution of the material in
> this e-mail is strictly forbidden.
>
>
>
--
Rafael Weingärtner
Re: enable local storage
Posted by Rajani Karuturi <ra...@apache.org>.
Do a host reconnect or management server restart. They will automatically
be show under primary storage.
On Thu, May 28, 2015 at 19:03 PM, S. Brüseke - proIO GmbH <
s.brueseke@proio.com> wrote:
Hi,
I installed new disks in some of our XenServer hosts and added the raid to
the XenServer-host. Now I need to add this new storage to CS.
I enabled local storage for the zone, but I am still unable to see the new
local storage as primary storage. Is there some kind of cron which needs to
run before I see this storage on infrastructure tab in CS UI? Does the
local storage needs to use a specific name or can I use a random name as
name-label inside XenServer?
Mit freundlichen Grüßen / With kind regards,
Swen Brüseke
- proIO GmbH -
Geschäftsführer: Swen Brüseke
Sitz der Gesellschaft: Frankfurt am Main
USt-IdNr. DE 267 075 918
Registergericht: Frankfurt am Main - HRB 86239
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
erhalten haben,
informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
nicht gestattet.
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error) please notify
the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material in
this e-mail is strictly forbidden.
--
-
Sent from Windows Phone
~Rajani
AW: enable local storage
Posted by "S. Brüseke - proIO GmbH" <s....@proio.com>.
Is it possible to attach only specific local storage to CS? We using raid1 for XenServer installation and during installation xs created local storage of the rest of this raid1. We installed a new raid5 with ssd and named it "localSSD". This is the local storage with I want CS installing instances on.
Mit freundlichen Grüßen / With kind regards,
Swen Brüseke
-----Ursprüngliche Nachricht-----
Von: Koushik Das [mailto:koushik.das@citrix.com]
Gesendet: Donnerstag, 28. Mai 2015 15:57
An: <us...@cloudstack.apache.org>
Betreff: Re: enable local storage
After enabling local storage for zone, MS restart is required for local storage to be discovered for already added hosts. For new hosts it gets added at the time of adding host.
On 28-May-2015, at 7:03 PM, S. Brüseke - proIO GmbH <s....@proio.com> wrote:
> Hi,
>
> I installed new disks in some of our XenServer hosts and added the raid to the XenServer-host. Now I need to add this new storage to CS.
> I enabled local storage for the zone, but I am still unable to see the new local storage as primary storage. Is there some kind of cron which needs to run before I see this storage on infrastructure tab in CS UI? Does the local storage needs to use a specific name or can I use a random name as name-label inside XenServer?
>
> Mit freundlichen Grüßen / With kind regards,
>
> Swen Brüseke
>
>
>
>
> - proIO GmbH -
> Geschäftsführer: Swen Brüseke
> Sitz der Gesellschaft: Frankfurt am Main
>
> USt-IdNr. DE 267 075 918
> Registergericht: Frankfurt am Main - HRB 86239
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
> Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
> Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information.
> If you are not the intended recipient (or have received this e-mail in
> error) please notify the sender immediately and destroy this e-mail.
> Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
>
>
- proIO GmbH -
Geschäftsführer: Swen Brüseke
Sitz der Gesellschaft: Frankfurt am Main
USt-IdNr. DE 267 075 918
Registergericht: Frankfurt am Main - HRB 86239
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben,
informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet.
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in error) please notify
the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
Re: enable local storage
Posted by Prashant s <op...@gmail.com>.
if you have already created your RAID5 Volume , then YES you can
reintroduce the volume to xenserver
ref: http://support.citrix.com/article/CTX121896
Complete the following procedure:
1.
Do a pvscan to get the Universally Unique Identifier (UUID) of an
existing SR on a local disk. This example uses UUID
39baf126-a535-549f-58d6-feeda55f7801:
*# pvscan*
PV /dev/sda3 VG VG_XenStorage-39baf126-a535-549f-58d6-feeda55f7801
lvm2 [66.87 GB / 57.87 GB free]
Total: 1 [66.87 GB] / in use: 1 [66.87 GB] / in no VG: 0 [0 ]
2.
Note the output above, the VG name of the local drive /dev/sda3 is
VG_XenStorage-39baf126-a535-549f-58d6-feeda55f7801 . The VG name contains
the SR UUID that resides on this storage media. In this case, the UUID is
39baf126-a535-549f-58d6-feeda55f7801.
3.
Introduce the SR with the following command:
*# xe sr-introduce uuid=39baf126-a535-549f-58d6-feeda55f7801 type=lvm
name-label=”Local storage” content-type=user*
This command sets up database records for the SR named “Local storage”.
4.
Locate the SCSI ID of the device or partition where the SR data is
stored:
*# ls -l /dev/disk/by-id/*
total 0
lrwxrwxrwx 1 root root 9 Jan 15 09:44
scsi-SATA_ST3500320AS_9QM13WP2 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 09:44
scsi-SATA_ST3500320AS_9QM13WP2-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jan 15 09:44 scsi-SATA_ST380815AS_6QZ5Z1AM
-> ../../sda
lrwxrwxrwx 1 root root 10 Jan 15 09:44
scsi-SATA_ST380815AS_6QZ5Z1AM-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 15 09:44
scsi-SATA_ST380815AS_6QZ5Z1AM-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan 15 09:44
scsi-SATA_ST380815AS_6QZ5Z1AM-part3 -> ../../sda3
In this case, the SCSI ID of the device /dev/sda3 is
scsi-SATA_ST380815AS_6QZ5Z1AM-part3. This is the device name to use in the
next command, where a PBD (physical block device – a connector between the
XenServer host and the SR) is created.
5.
Run the xe host-list command to find out the host UUID for the local
host:
*# xe host-list*
uuid ( RO) : 83f2c775-57fc-457b-9f98-2b9b0a7dbcb5
name-label ( RW): xenserver1
name-description ( RO): Default install of XenServer
6.
Create the PBD using the device SCSI ID, host UUID and SR UUID detected
above:
*# xe pbd-create sr-uuid=39baf126-a535-549f-58d6-feeda55f7801
device-config:device=/dev/disk/by-id/scsi-SATA_ST380815AS_6QZ5Z1AM-part3
host-uuid=83f2c775-57fc-457b-9f98-2b9b0a7dbcb5
aec2c6fc-e1fb-0a27-2437-9862cffe213e*
7.
Attach the PBD created with* xe pbd-plug *command:
*# xe pbd-plug uuid=aec2c6fc-e1fb-0a27-2437-9862cffe213e*
The SR should be connected to the XenServer host and be visible in
XenCenter
Thanks
prashant s
On Fri, May 29, 2015 at 9:52 AM, Prashant s <op...@gmail.com> wrote:
> questions :
>
> is the SSD disks local to the xenserver , then yes you can create local sr
> & add to CS.
>
> Complete the following procedure to create a Storage Repository (SR) on a
> new local hard drive (HDD):
> *Note*: The stored data in the server will be lost.
>
> 1.
>
> Run the following command to find the disk ID of the new device:
> *# cat /proc/partitions*
> A list of HDDs and partitions are displayed. Find out which device is
> your new local disk. Locate it by size. (This is probably “sdb” or
> “/cciss/c0d1p0”)
> *# ll /dev/disk/by-id*
> 2.
>
> Find the disk ID of the “sdb” or “cciss/c0d1”disk. The
> “scsi-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx” or
> “cciss-xxxxxxxxxxxxxxxxxxxxxxxxxx”format is required.
> 3.
>
> Run the following command to create an SR:
> *# xe sr-create content-type=user
> device-config:device=/dev/disk/by-id/<scsi-xxxxxxxxxxxxxxxxxxxxxxxxx>
> host-uuid=<host-uuid> name-label=”Local Storage 2” shared=false type=lvm*
> Or
> *# xe sr-create content-type=user
> device-config:device=/dev/disk/by-id/<cciss-xxxxxxxxxxxxxxxxxxxxxxxxx>
> host-uuid=<host-uuid> name-label=”Local Storage 2” shared=false type=lvm*
>
> *for example *
>
> xe sr-create content-type=user
> device-config:device=/dev/disk/by-id/scsi-SATA_WDC_WD1003FBYX-_WD-WCAW32786419,/dev/disk/by-id/scsi-SATA_WDC_WD1003FBYX-_WD-WMAW30367881-part3
> host-uuid=96f06415-461b-43c9-b86a-4969b81b3d80 name-label=local-sata
> shared=false type=lvm
> d8e67caf-32a7-6234-f8c2-3bbd3a3010be
> [root@dc4xen-c0u16n2 ~]#
>
> now go back to you CS web ui and look for the new storage in the primary
> storage secion
>
> On Fri, May 29, 2015 at 2:42 AM, Rajani Karuturi <ra...@apache.org>
> wrote:
>
>> As far as I know, that is not possible.
>>
>> ~Rajani
>>
>> On Thu, May 28, 2015 at 8:41 PM, S. Brüseke - proIO GmbH <
>> s.brueseke@proio.com> wrote:
>>
>> > Is it possible to attach only specific local storage to CS? We using
>> raid1
>> > for XenServer installation and during installation xs created local
>> storage
>> > of the rest of this raid1. We installed a new raid5 with ssd and named
>> it
>> > "localSSD". This is the local storage with I want CS installing
>> instances
>> > on.
>> >
>> > Mit freundlichen Grüßen / With kind regards,
>> >
>> > Swen Brüseke
>> >
>> > -----Ursprüngliche Nachricht-----
>> > Von: Koushik Das [mailto:koushik.das@citrix.com]
>> > Gesendet: Donnerstag, 28. Mai 2015 15:57
>> > An: <us...@cloudstack.apache.org>
>> > Betreff: Re: enable local storage
>> >
>> > After enabling local storage for zone, MS restart is required for local
>> > storage to be discovered for already added hosts. For new hosts it gets
>> > added at the time of adding host.
>> >
>> > On 28-May-2015, at 7:03 PM, S. Brüseke - proIO GmbH <
>> s.brueseke@proio.com>
>> > wrote:
>> >
>> > > Hi,
>> > >
>> > > I installed new disks in some of our XenServer hosts and added the
>> raid
>> > to the XenServer-host. Now I need to add this new storage to CS.
>> > > I enabled local storage for the zone, but I am still unable to see the
>> > new local storage as primary storage. Is there some kind of cron which
>> > needs to run before I see this storage on infrastructure tab in CS UI?
>> Does
>> > the local storage needs to use a specific name or can I use a random
>> name
>> > as name-label inside XenServer?
>> > >
>> > > Mit freundlichen Grüßen / With kind regards,
>> > >
>> > > Swen Brüseke
>> > >
>> > >
>> > >
>> > >
>> > > - proIO GmbH -
>> > > Geschäftsführer: Swen Brüseke
>> > > Sitz der Gesellschaft: Frankfurt am Main
>> > >
>> > > USt-IdNr. DE 267 075 918
>> > > Registergericht: Frankfurt am Main - HRB 86239
>> > >
>> > > Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
>> > Informationen.
>> > > Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
>> > > erhalten haben, informieren Sie bitte sofort den Absender und
>> vernichten
>> > Sie diese Mail.
>> > > Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail
>> sind
>> > nicht gestattet.
>> > >
>> > > This e-mail may contain confidential and/or privileged information.
>> > > If you are not the intended recipient (or have received this e-mail in
>> > > error) please notify the sender immediately and destroy this e-mail.
>> > > Any unauthorized copying, disclosure or distribution of the material
>> in
>> > this e-mail is strictly forbidden.
>> > >
>> > >
>> >
>> >
>> >
>> >
>> > - proIO GmbH -
>> > Geschäftsführer: Swen Brüseke
>> > Sitz der Gesellschaft: Frankfurt am Main
>> >
>> > USt-IdNr. DE 267 075 918
>> > Registergericht: Frankfurt am Main - HRB 86239
>> >
>> > Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
>> > Informationen.
>> > Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
>> > erhalten haben,
>> > informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
>> > Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
>> > nicht gestattet.
>> >
>> > This e-mail may contain confidential and/or privileged information.
>> > If you are not the intended recipient (or have received this e-mail in
>> > error) please notify
>> > the sender immediately and destroy this e-mail.
>> > Any unauthorized copying, disclosure or distribution of the material in
>> > this e-mail is strictly forbidden.
>> >
>> >
>> >
>>
>
>
Re: enable local storage
Posted by Prashant s <op...@gmail.com>.
questions :
is the SSD disks local to the xenserver , then yes you can create local sr
& add to CS.
Complete the following procedure to create a Storage Repository (SR) on a
new local hard drive (HDD):
*Note*: The stored data in the server will be lost.
1.
Run the following command to find the disk ID of the new device:
*# cat /proc/partitions*
A list of HDDs and partitions are displayed. Find out which device is
your new local disk. Locate it by size. (This is probably “sdb” or
“/cciss/c0d1p0”)
*# ll /dev/disk/by-id*
2.
Find the disk ID of the “sdb” or “cciss/c0d1”disk. The
“scsi-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx” or
“cciss-xxxxxxxxxxxxxxxxxxxxxxxxxx”format is required.
3.
Run the following command to create an SR:
*# xe sr-create content-type=user
device-config:device=/dev/disk/by-id/<scsi-xxxxxxxxxxxxxxxxxxxxxxxxx>
host-uuid=<host-uuid> name-label=”Local Storage 2” shared=false type=lvm*
Or
*# xe sr-create content-type=user
device-config:device=/dev/disk/by-id/<cciss-xxxxxxxxxxxxxxxxxxxxxxxxx>
host-uuid=<host-uuid> name-label=”Local Storage 2” shared=false type=lvm*
*for example *
xe sr-create content-type=user
device-config:device=/dev/disk/by-id/scsi-SATA_WDC_WD1003FBYX-_WD-WCAW32786419,/dev/disk/by-id/scsi-SATA_WDC_WD1003FBYX-_WD-WMAW30367881-part3
host-uuid=96f06415-461b-43c9-b86a-4969b81b3d80 name-label=local-sata
shared=false type=lvm
d8e67caf-32a7-6234-f8c2-3bbd3a3010be
[root@dc4xen-c0u16n2 ~]#
now go back to you CS web ui and look for the new storage in the primary
storage secion
On Fri, May 29, 2015 at 2:42 AM, Rajani Karuturi <ra...@apache.org> wrote:
> As far as I know, that is not possible.
>
> ~Rajani
>
> On Thu, May 28, 2015 at 8:41 PM, S. Brüseke - proIO GmbH <
> s.brueseke@proio.com> wrote:
>
> > Is it possible to attach only specific local storage to CS? We using
> raid1
> > for XenServer installation and during installation xs created local
> storage
> > of the rest of this raid1. We installed a new raid5 with ssd and named it
> > "localSSD". This is the local storage with I want CS installing instances
> > on.
> >
> > Mit freundlichen Grüßen / With kind regards,
> >
> > Swen Brüseke
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Koushik Das [mailto:koushik.das@citrix.com]
> > Gesendet: Donnerstag, 28. Mai 2015 15:57
> > An: <us...@cloudstack.apache.org>
> > Betreff: Re: enable local storage
> >
> > After enabling local storage for zone, MS restart is required for local
> > storage to be discovered for already added hosts. For new hosts it gets
> > added at the time of adding host.
> >
> > On 28-May-2015, at 7:03 PM, S. Brüseke - proIO GmbH <
> s.brueseke@proio.com>
> > wrote:
> >
> > > Hi,
> > >
> > > I installed new disks in some of our XenServer hosts and added the raid
> > to the XenServer-host. Now I need to add this new storage to CS.
> > > I enabled local storage for the zone, but I am still unable to see the
> > new local storage as primary storage. Is there some kind of cron which
> > needs to run before I see this storage on infrastructure tab in CS UI?
> Does
> > the local storage needs to use a specific name or can I use a random name
> > as name-label inside XenServer?
> > >
> > > Mit freundlichen Grüßen / With kind regards,
> > >
> > > Swen Brüseke
> > >
> > >
> > >
> > >
> > > - proIO GmbH -
> > > Geschäftsführer: Swen Brüseke
> > > Sitz der Gesellschaft: Frankfurt am Main
> > >
> > > USt-IdNr. DE 267 075 918
> > > Registergericht: Frankfurt am Main - HRB 86239
> > >
> > > Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> > Informationen.
> > > Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> > > erhalten haben, informieren Sie bitte sofort den Absender und
> vernichten
> > Sie diese Mail.
> > > Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
> > nicht gestattet.
> > >
> > > This e-mail may contain confidential and/or privileged information.
> > > If you are not the intended recipient (or have received this e-mail in
> > > error) please notify the sender immediately and destroy this e-mail.
> > > Any unauthorized copying, disclosure or distribution of the material in
> > this e-mail is strictly forbidden.
> > >
> > >
> >
> >
> >
> >
> > - proIO GmbH -
> > Geschäftsführer: Swen Brüseke
> > Sitz der Gesellschaft: Frankfurt am Main
> >
> > USt-IdNr. DE 267 075 918
> > Registergericht: Frankfurt am Main - HRB 86239
> >
> > Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> > Informationen.
> > Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> > erhalten haben,
> > informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
> > Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
> > nicht gestattet.
> >
> > This e-mail may contain confidential and/or privileged information.
> > If you are not the intended recipient (or have received this e-mail in
> > error) please notify
> > the sender immediately and destroy this e-mail.
> > Any unauthorized copying, disclosure or distribution of the material in
> > this e-mail is strictly forbidden.
> >
> >
> >
>
Re: enable local storage
Posted by Rajani Karuturi <ra...@apache.org>.
As far as I know, that is not possible.
~Rajani
On Thu, May 28, 2015 at 8:41 PM, S. Brüseke - proIO GmbH <
s.brueseke@proio.com> wrote:
> Is it possible to attach only specific local storage to CS? We using raid1
> for XenServer installation and during installation xs created local storage
> of the rest of this raid1. We installed a new raid5 with ssd and named it
> "localSSD". This is the local storage with I want CS installing instances
> on.
>
> Mit freundlichen Grüßen / With kind regards,
>
> Swen Brüseke
>
> -----Ursprüngliche Nachricht-----
> Von: Koushik Das [mailto:koushik.das@citrix.com]
> Gesendet: Donnerstag, 28. Mai 2015 15:57
> An: <us...@cloudstack.apache.org>
> Betreff: Re: enable local storage
>
> After enabling local storage for zone, MS restart is required for local
> storage to be discovered for already added hosts. For new hosts it gets
> added at the time of adding host.
>
> On 28-May-2015, at 7:03 PM, S. Brüseke - proIO GmbH <s....@proio.com>
> wrote:
>
> > Hi,
> >
> > I installed new disks in some of our XenServer hosts and added the raid
> to the XenServer-host. Now I need to add this new storage to CS.
> > I enabled local storage for the zone, but I am still unable to see the
> new local storage as primary storage. Is there some kind of cron which
> needs to run before I see this storage on infrastructure tab in CS UI? Does
> the local storage needs to use a specific name or can I use a random name
> as name-label inside XenServer?
> >
> > Mit freundlichen Grüßen / With kind regards,
> >
> > Swen Brüseke
> >
> >
> >
> >
> > - proIO GmbH -
> > Geschäftsführer: Swen Brüseke
> > Sitz der Gesellschaft: Frankfurt am Main
> >
> > USt-IdNr. DE 267 075 918
> > Registergericht: Frankfurt am Main - HRB 86239
> >
> > Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen.
> > Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> > erhalten haben, informieren Sie bitte sofort den Absender und vernichten
> Sie diese Mail.
> > Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
> nicht gestattet.
> >
> > This e-mail may contain confidential and/or privileged information.
> > If you are not the intended recipient (or have received this e-mail in
> > error) please notify the sender immediately and destroy this e-mail.
> > Any unauthorized copying, disclosure or distribution of the material in
> this e-mail is strictly forbidden.
> >
> >
>
>
>
>
> - proIO GmbH -
> Geschäftsführer: Swen Brüseke
> Sitz der Gesellschaft: Frankfurt am Main
>
> USt-IdNr. DE 267 075 918
> Registergericht: Frankfurt am Main - HRB 86239
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen.
> Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich
> erhalten haben,
> informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
> Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind
> nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information.
> If you are not the intended recipient (or have received this e-mail in
> error) please notify
> the sender immediately and destroy this e-mail.
> Any unauthorized copying, disclosure or distribution of the material in
> this e-mail is strictly forbidden.
>
>
>
Re: enable local storage
Posted by Koushik Das <ko...@citrix.com>.
After enabling local storage for zone, MS restart is required for local storage to be discovered for already added hosts. For new hosts it gets added at the time of adding host.
On 28-May-2015, at 7:03 PM, S. Brüseke - proIO GmbH <s....@proio.com> wrote:
> Hi,
>
> I installed new disks in some of our XenServer hosts and added the raid to the XenServer-host. Now I need to add this new storage to CS.
> I enabled local storage for the zone, but I am still unable to see the new local storage as primary storage. Is there some kind of cron which needs to run before I see this storage on infrastructure tab in CS UI? Does the local storage needs to use a specific name or can I use a random name as name-label inside XenServer?
>
> Mit freundlichen Grüßen / With kind regards,
>
> Swen Brüseke
>
>
>
>
> - proIO GmbH -
> Geschäftsführer: Swen Brüseke
> Sitz der Gesellschaft: Frankfurt am Main
>
> USt-IdNr. DE 267 075 918
> Registergericht: Frankfurt am Main - HRB 86239
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
> Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben,
> informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
> Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information.
> If you are not the intended recipient (or have received this e-mail in error) please notify
> the sender immediately and destroy this e-mail.
> Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
>
>