You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by kirkal <bi...@gmail.com> on 2006/06/26 02:26:53 UTC
ActiveMQ remote broker problem!
hi!
I'm a relative newbie to JMS.
would really like to know how to
connect to a remote ActiveMQ broker.
i use the following line :
ActiveMQConnectionFactory connectionFactory = new
ActiveMQConnectionFactory("remote://tcp://remotehost:61616");
but i don't seem to be able to connect at all and the program goes ahead and
uses the embedded connection.
please let me know how to configure activeMQ to use a remote broker.
thanks!
please let me know!
--
View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5039866
Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by kirkal <bi...@gmail.com>.
hmmm...i tried that - does not work. any other suggestions?
any suggestions on how i could possibly check if the broker is visible /
check if any messages are being sent ?
do let me know.
thanks!
--
View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5042118
Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by James Strachan <ja...@gmail.com>.
to connect to a remote broker in 4.x of ActiveMQ just use the tcp:// connector.
Try
tcp://remotehost:61616
If that doesn't work - maybe DNS is not working for you; so try using
the IP address
tcp://1.2.3.4:61616
etc
On 6/26/06, kirkal <bi...@gmail.com> wrote:
>
> hi!
>
> I'm a relative newbie to JMS.
>
> would really like to know how to
> connect to a remote ActiveMQ broker.
>
> i use the following line :
>
> ActiveMQConnectionFactory connectionFactory = new
> ActiveMQConnectionFactory("remote://tcp://remotehost:61616");
>
> but i don't seem to be able to connect at all and the program goes ahead and
> uses the embedded connection.
>
> please let me know how to configure activeMQ to use a remote broker.
>
> thanks!
>
>
> please let me know!
> --
> View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5039866
> Sent from the ActiveMQ - User forum at Nabble.com.
>
>
--
James
-------
http://radio.weblogs.com/0112098/
Re: ActiveMQ remote broker problem!
Posted by kirkal <bi...@gmail.com>.
hmmm...i don't get any exception messages...i printed out the message headers
as i was sending them and this is how my output looked after running my
program:
log4j:WARN No appenders could be found for logger
(org.activemq.broker.impl.BrokerContainerImpl).
log4j:WARN Please initialize the log4j system properly.
Sample application publishing a message to a topic.
TEST.FOO
ACTIVEMQ_TEXT_MESSAGE: id = 0 ActiveMQMessage{ , jmsMessageID =
ID:kubk-32780-1151305058623-12:2, bodyAsBytes = null, readOnlyMessage =
false, jmsClientID = 'null' , jmsCorrelationID = 'null' , jmsDestination =
TEST.FOO, jmsReplyTo = null, jmsDeliveryMode = 2, jmsRedelivered = false,
jmsType = 'null' , jmsExpiration = 0, jmsPriority = 4, jmsTimestamp =
1151305065184, properties = null, readOnlyProperties = false,
entryBrokerName = 'null' , entryClusterName = 'null' , consumerNos = null,
transactionId = 'null' , xaTransacted = false, consumerIdentifer = 'null' ,
messageConsumed = false, transientConsumed = false, sequenceNumber = 0,
deliveryCount = 1, dispatchedFromDLQ = false, messageAcknowledge = null,
jmsMessageIdentity = null, producerKey = null }, text = Hello world
Message published0TEST.FOO
where TEST.FOO is the topic i am attempting to send my messages to.
PS: ok....showing how much of a newbie I am, how DO i check whether the
other machine is behind a firewall?
--
View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5042933
Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by Jonas Lim <jl...@exist.com>.
You can use Activemq's jmx support to monitor your remote broker
http://incubator.apache.org/activemq/jmx.html
Btw, can you check that your remote broker is not behind a firewall. Also,
do you get any exception message (broker or client) when sending the
message?
Regards,
Jonas
----- Original Message -----
From: "kirkal" <bi...@gmail.com>
To: <ac...@geronimo.apache.org>
Sent: Monday, June 26, 2006 2:59 PM
Subject: Re: ActiveMQ remote broker problem!
>
> hmmm...i tried that - does not work. any other suggestions?
>
> any suggestions on how i could possibly check if the broker is visible /
> check if any messages are being sent ?
>
> do let me know.
>
> thanks!
>
> --
> View this message in context:
> http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5042371
> Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by kirkal <bi...@gmail.com>.
hmmm...i tried that - does not work. any other suggestions?
any suggestions on how i could possibly check if the broker is visible /
check if any messages are being sent ?
do let me know.
thanks!
--
View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5042371
Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by Jonas Lim <jl...@exist.com>.
Hi,
Try removing the "remote" in your url (ie. tcp://remotehost:61616)
Btw, more details on other transports here :
http://incubator.apache.org/activemq/configuring-transports.html
Regards,
Jonas
----- Original Message -----
From: "kirkal" <bi...@gmail.com>
To: <ac...@geronimo.apache.org>
Sent: Monday, June 26, 2006 8:26 AM
Subject: ActiveMQ remote broker problem!
>
> hi!
>
> I'm a relative newbie to JMS.
>
> would really like to know how to
> connect to a remote ActiveMQ broker.
>
> i use the following line :
>
> ActiveMQConnectionFactory connectionFactory = new
> ActiveMQConnectionFactory("remote://tcp://remotehost:61616");
>
> but i don't seem to be able to connect at all and the program goes ahead
> and
> uses the embedded connection.
>
> please let me know how to configure activeMQ to use a remote broker.
>
> thanks!
>
>
> please let me know!
> --
> View this message in context:
> http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5039866
> Sent from the ActiveMQ - User forum at Nabble.com.
Re: ActiveMQ remote broker problem!
Posted by Adrian Co <ac...@exist.com>.
Hi,
One common oversight is not starting the connection. Did you call
connection.start()?
BTW, you might want to use AMQ 4.0.1 as it has more features and bug
fixes. :)
http://www.activemq.org/site/activemq-401-release.html
Regards,
Adrian
kirkal wrote:
> hi!
>
> I'm a relative newbie to JMS.
>
> would really like to know how to
> connect to a remote ActiveMQ broker.
>
> i use the following line :
>
> ActiveMQConnectionFactory connectionFactory = new
> ActiveMQConnectionFactory("remote://tcp://remotehost:61616");
>
> but i don't seem to be able to connect at all and the program goes ahead and
> uses the embedded connection.
>
> please let me know how to configure activeMQ to use a remote broker.
>
> thanks!
>
>
> please let me know!
> --
> View this message in context: http://www.nabble.com/ActiveMQ-remote-broker-problem%21-t1846354.html#a5039866
> Sent from the ActiveMQ - User forum at Nabble.com.
>
>