You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by kalin m <ka...@el.net> on 2008/07/02 07:19:00 UTC
[users@httpd] Re: httpd php dump
there is no extensions.ini anywhere on this machine... a brand new one.
httpd/logs/error_log has 6 lines in it. something about session cash
(SSL) not configured...
httpd runs fine without loading the php module....
Odhiambo Washington wrote:
> Normally caused by one of the php extensions modules if you installed
> them, which I believe you did. Take a look at
> /usr/local/etc/php/extensions.ini and try commenting the modules one
> by one and restarting apache until you find the culprit. Also look at
> httpd-error.log for clues.
>
> ./Wash
>
>
>
> On 7/2/08, kalin m <ka...@el.net> wrote:
>
>> ok...
>>
>> what to do?
>>
>> freebsd 7; httpd 2.2.9; php5.2.6 (or 5.1.2)
>>
>>
>> if the line:
>> LoadModule php5_module modules/libphp5.so
>>
>> is in the httpd.conf httpd dumps core. no matter which version of php.
>>
>> php was configured with just this : ./configure
>> --with-mysql=/usr/local/mysql --with-apxs2=/etc/httpd/bin/apxs
>>
>> here is some relevant information:
>>
>> # gdb /etc/httpd/bin/httpd httpd.core
>> GNU gdb 6.1.1 [FreeBSD]
>> Copyright 2004 Free Software Foundation, Inc.
>> GDB is free software, covered by the GNU General Public License, and you are
>> welcome to change it and/or distribute copies of it under certain
>> conditions.
>> Type "show copying" to see the conditions.
>> There is absolutely no warranty for GDB. Type "show warranty" for details.
>> This GDB was configured as "amd64-marcel-freebsd"...
>> Core was generated by `httpd'.
>> Program terminated with signal 11, Segmentation fault.
>> Reading symbols from /lib/libm.so.5...done.
>> Loaded symbols for /lib/libm.so.5
>> Reading symbols from /etc/httpd/lib/libaprutil-1.so.3...done.
>> Loaded symbols for /etc/httpd/lib/libaprutil-1.so.3
>> Reading symbols from /etc/httpd/lib/libexpat.so.1...done.
>> Loaded symbols for /etc/httpd/lib/libexpat.so.1
>> Reading symbols from /etc/httpd/lib/libapr-1.so.3...done.
>> Loaded symbols for /etc/httpd/lib/libapr-1.so.3
>> Reading symbols from /lib/libcrypt.so.4...done.
>> Loaded symbols for /lib/libcrypt.so.4
>> Reading symbols from /lib/libthr.so.3...done.
>> Loaded symbols for /lib/libthr.so.3
>> Reading symbols from /lib/libc.so.7...done.
>> Loaded symbols for /lib/libc.so.7
>> Reading symbols from /etc/httpd/modules/libphp5.so...done.
>> Loaded symbols for /etc/httpd/modules/libphp5.so
>> Reading symbols from /usr/local/mysql/lib/mysql/libmysqlclient.so.15...done.
>> Loaded symbols for /usr/local/mysql/lib/mysql/libmysqlclient.so.15
>> Reading symbols from /usr/local/lib/libxml2.so.5...done.
>> Loaded symbols for /usr/local/lib/libxml2.so.5
>> Reading symbols from /usr/local/lib/libiconv.so.3...done.
>> Loaded symbols for /usr/local/lib/libiconv.so.3
>> Reading symbols from /lib/libz.so.4...done.
>> Loaded symbols for /lib/libz.so.4
>> Reading symbols from /libexec/ld-elf.so.1...done.
>> Loaded symbols for /libexec/ld-elf.so.1
>> #0 0x00000008004a8060 in ?? ()
>> [New Thread 0x801101120 (LWP 100329)]
>> (gdb)
>>
>>
>> # httpd -l
>> Compiled in modules:
>> core.c
>> mod_authn_file.c
>> mod_authn_default.c
>> mod_authz_host.c
>> mod_authz_groupfile.c
>> mod_authz_user.c
>> mod_authz_default.c
>> mod_auth_basic.c
>> mod_include.c
>> mod_filter.c
>> mod_log_config.c
>> mod_env.c
>> mod_headers.c
>> mod_unique_id.c
>> mod_setenvif.c
>> mod_ssl.c
>> prefork.c
>> http_core.c
>> mod_mime.c
>> mod_status.c
>> mod_autoindex.c
>> mod_asis.c
>> mod_cgi.c
>> mod_negotiation.c
>> mod_dir.c
>> mod_actions.c
>> mod_userdir.c
>> mod_alias.c
>> mod_rewrite.c
>> mod_so.c
>>
>>
>> so... yea.... what to do? ?!?
>>
>> thanks...
>>
>>
>>
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>>
>>
>
>
Re: [users@httpd] Re: httpd php dump
Posted by "William A. Rowe, Jr." <wr...@rowe-clan.net>.
kalin m wrote:
>
> what would this mean:
>
> # ./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
> --enable-rewrite --enable-so --enable-headers --enable-unique-id
> checking for chosen layout... Apache
> checking for working mkdir -p... yes
> checking build system type... x86_64-unknown-freebsd7.0
> checking host system type... x86_64-unknown-freebsd7.0
> checking target system type... x86_64-unknown-freebsd7.0
>
> Configuring Apache Portable Runtime library ...
>
> checking for APR... apr-1-config: not found
> reconfig
It didn't find apr-1-config executable in your path, e.g. you did
not install apr and apr-util individually before building httpd (we hope)
> configuring package in srclib/apr now
> configure: WARNING: Unrecognized options: --enable-ssl, --with-ssl,
> --enable-rewrite, --enable-so, --enable-headers, --enable-unique-id
>
> Unrecognized options?!
autoconf 1.62 new noise, entirely violates autoconf's design principals
(that warnings shouldn't be emitted and especially not for sub-packages).
apr doesn't have these options, httpd does.
We've hacked apr-1.3 to resolve this chaos, but you'll have to wait for
a new httpd package to clean up the noise. In the meantime, ignore it.
It's meaningless (these were always unrecognized by apr, it just didn't
whine about it.)
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] Re: httpd php dump
Posted by kalin m <ka...@el.net>.
what would this mean:
# ./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
--enable-rewrite --enable-so --enable-headers --enable-unique-id
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... x86_64-unknown-freebsd7.0
checking host system type... x86_64-unknown-freebsd7.0
checking target system type... x86_64-unknown-freebsd7.0
Configuring Apache Portable Runtime library ...
checking for APR... apr-1-config: not found
reconfig
configuring package in srclib/apr now
configure: WARNING: Unrecognized options: --enable-ssl, --with-ssl,
--enable-rewrite, --enable-so, --enable-headers, --enable-unique-id
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
checking build system type... x86_64-unknown-freebsd7.0
checking host system type... x86_64-unknown-freebsd7.0
checking target system type... x86_64-unknown-freebsd7.0
Configuring APR library
.......
Unrecognized options?!
kalin m wrote:
>
>
> if i build php with all the things i need it builds fine but at the
> time of instalaltion here is what happens:
>
> # make install
> Installing PHP SAPI module: apache2handler
> /etc/httpd/build/instdso.sh SH_LIBTOOL='/etc/httpd/build/libtool'
> libphp5.la /etc/httpd/modules
> /etc/httpd/build/libtool --mode=install cp libphp5.la /etc/httpd/modules/
> cp .libs/libphp5.so /etc/httpd/modules/libphp5.so
> cp .libs/libphp5.lai /etc/httpd/modules/libphp5.la
> libtool: install: warning: remember to run `libtool --finish
> /usr/local/src/php-5.2.6/libs'
> chmod 755 /etc/httpd/modules/libphp5.so
> [activating module `php5' in /etc/httpd/conf/httpd.conf]
> Installing PHP CLI binary: /usr/local/bin/
> Installing PHP CLI man page: /usr/local/man/man1/
> Installing build environment: /usr/local/lib/php/build/
> Installing header files: /usr/local/include/php/
> Installing helper programs: /usr/local/bin/
> program: phpize
> program: php-config
> Installing man pages: /usr/local/man/man1/
> page: phpize.1
> page: php-config.1
> Installing PEAR environment: /usr/local/lib/php/
> Segmentation fault (core dumped)
> *** Error code 139
>
> Stop in /usr/local/src/php-5.2.6.
> *** Error code 1
>
> Stop in /usr/local/src/php-5.2.6.
>
>
> what is the logical explanation for all this
>
> tanks.
>
>
>
> kalin m wrote:
>> this is getting to ridiculous levels....
>>
>> if i build php only with --with-apxs2=/etc/httpd/bin/apxs then apache
>> starts and httpd/php works ok. anything else added to the
>> configuration - and i tried different stuff - (
>> --with-mysql=/usr/local/mysql; --with-curl; --with-openssl=/usr) -
>> alone or in combination builds fine but at the time of apache startup
>> it dumps core...
>>
>> apparently the httpd - currently 2.2.9 - configure doesn't matter. so
>> right now the httpd is configured - as intended - with:
>> ./configure --prefix=/etc/httpd --enable-ssl
>> --with-ssl=/usr/local/ssl --enable-rewrite --enable-so
>> --enable-headers --enable-unique-id
>>
>> i tried also with httpd 2.0.63. same thing. i can't imagine anymore
>> what the hell can it be. i've done many other installs and never had
>> this things happening.
>>
>> the machine is freebsd 7. its a 64 bit build on a multiprocessor
>> machine. dual quad core... and identifies itself as amd64...
>>
>> i just don't get it....
>> what to look at?!
>>
>> thanks...
>>
>>
>>
>> kalin m wrote:
>>> i'd be assuming than that i'd need to build an older apache.
>>> this is probably a stupid question but is there anybody out there
>>> that is using apache 2.2.9 + php 5.2.6 (as DSO) on freebsd 7 amd64
>>> (multi processor) without problems?
>>>
>>> thanks...
>>>
>>>
>>>
>>> kalin m wrote:
>>>> sure.
>>>>
>>>> ./configure --prefix=/etc/httpd --enable-ssl
>>>> --with-ssl=/usr/local/ssl --enable-rewrite --enable-so
>>>> --enable-headers --enable-unique-id
>>>>
>>>> like i said there is pretty much nothing in the error log for
>>>> httpd. it's a brand new install. here is the whole file:
>>>>
>>>> [Tue Jul 01 22:45:36 2008] [warn] Init: Session Cache is not
>>>> configured [hint: SSLSessionCache]
>>>> [Tue Jul 01 22:45:37 2008] [notice] Apache/2.2.9 (Unix)
>>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>>> [Tue Jul 01 22:46:19 2008] [error] [client x.x.x.x] File does not
>>>> exist: /usr/web/favicon.ico
>>>> [Tue Jul 01 22:50:11 2008] [notice] caught SIGTERM, shutting down
>>>> [Tue Jul 01 22:52:33 2008] [warn] Init: Session Cache is not
>>>> configured [hint: SSLSessionCache]
>>>> [Tue Jul 01 22:52:34 2008] [notice] Apache/2.2.9 (Unix)
>>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>>> [Tue Jul 01 22:55:29 2008] [notice] caught SIGTERM, shutting down
>>>> [Tue Jul 01 22:55:35 2008] [warn] Init: Session Cache is not
>>>> configured [hint: SSLSessionCache]
>>>> [Tue Jul 01 22:55:36 2008] [notice] Apache/2.2.9 (Unix)
>>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>>> [Tue Jul 01 23:00:50 2008] [notice] caught SIGTERM, shutting down
>>>> ~
>>>> (just changed my ip there)
>>>>
>>>> i suspect the apache so module...... but not really sure....
>>>> executing php files on the cli is working fine to.. it must be the
>>>> so...
>>>> httpd and php are supposed to just work together..... that's why
>>>> core dump without any messages is a bit weired.....
>>>>
>>>>
>>>>
>>>> Odhiambo Washington wrote:
>>>>> On Wed, Jul 2, 2008 at 8:19 AM, kalin m <ka...@el.net> wrote:
>>>>>
>>>>>> there is no extensions.ini anywhere on this machine... a brand
>>>>>> new one.
>>>>>> httpd/logs/error_log has 6 lines in it. something about session
>>>>>> cash (SSL)
>>>>>> not configured...
>>>>>>
>>>>>> httpd runs fine without loading the php module....
>>>>>>
>>>>>
>>>>> Would you like to provide details on how you compiled your apache
>>>>> then? Did you use the ports to install?
>>>>> What options did you compile with?
>>>>> What is this that you have in the error_log that you don't want to
>>>>> reveal?
>>>>>
>>>>>
>>>>>
>>> _______________________________________________
>>> freebsd-questions@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>> To unsubscribe, send any mail to
>>> "freebsd-questions-unsubscribe@freebsd.org"
>>
>> ---------------------------------------------------------------------
>> The official User-To-User support forum of the Apache HTTP Server
>> Project.
>> See <URL:http://httpd.apache.org/userslist.html> for more info.
>> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>> " from the digest: users-digest-unsubscribe@httpd.apache.org
>> For additional commands, e-mail: users-help@httpd.apache.org
>>
>
> ---------------------------------------------------------------------
> The official User-To-User support forum of the Apache HTTP Server
> Project.
> See <URL:http://httpd.apache.org/userslist.html> for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] Re: httpd php dump
Posted by kalin m <ka...@el.net>.
if i build php with all the things i need it builds fine but at the time
of instalaltion here is what happens:
# make install
Installing PHP SAPI module: apache2handler
/etc/httpd/build/instdso.sh SH_LIBTOOL='/etc/httpd/build/libtool'
libphp5.la /etc/httpd/modules
/etc/httpd/build/libtool --mode=install cp libphp5.la /etc/httpd/modules/
cp .libs/libphp5.so /etc/httpd/modules/libphp5.so
cp .libs/libphp5.lai /etc/httpd/modules/libphp5.la
libtool: install: warning: remember to run `libtool --finish
/usr/local/src/php-5.2.6/libs'
chmod 755 /etc/httpd/modules/libphp5.so
[activating module `php5' in /etc/httpd/conf/httpd.conf]
Installing PHP CLI binary: /usr/local/bin/
Installing PHP CLI man page: /usr/local/man/man1/
Installing build environment: /usr/local/lib/php/build/
Installing header files: /usr/local/include/php/
Installing helper programs: /usr/local/bin/
program: phpize
program: php-config
Installing man pages: /usr/local/man/man1/
page: phpize.1
page: php-config.1
Installing PEAR environment: /usr/local/lib/php/
Segmentation fault (core dumped)
*** Error code 139
Stop in /usr/local/src/php-5.2.6.
*** Error code 1
Stop in /usr/local/src/php-5.2.6.
what is the logical explanation for all this
tanks.
kalin m wrote:
> this is getting to ridiculous levels....
>
> if i build php only with --with-apxs2=/etc/httpd/bin/apxs then apache
> starts and httpd/php works ok. anything else added to the
> configuration - and i tried different stuff - (
> --with-mysql=/usr/local/mysql; --with-curl; --with-openssl=/usr) -
> alone or in combination builds fine but at the time of apache startup
> it dumps core...
>
> apparently the httpd - currently 2.2.9 - configure doesn't matter. so
> right now the httpd is configured - as intended - with:
> ./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
> --enable-rewrite --enable-so --enable-headers --enable-unique-id
>
> i tried also with httpd 2.0.63. same thing. i can't imagine anymore
> what the hell can it be. i've done many other installs and never had
> this things happening.
>
> the machine is freebsd 7. its a 64 bit build on a multiprocessor
> machine. dual quad core... and identifies itself as amd64...
>
> i just don't get it....
> what to look at?!
>
> thanks...
>
>
>
> kalin m wrote:
>> i'd be assuming than that i'd need to build an older apache.
>> this is probably a stupid question but is there anybody out there
>> that is using apache 2.2.9 + php 5.2.6 (as DSO) on freebsd 7 amd64
>> (multi processor) without problems?
>>
>> thanks...
>>
>>
>>
>> kalin m wrote:
>>> sure.
>>>
>>> ./configure --prefix=/etc/httpd --enable-ssl
>>> --with-ssl=/usr/local/ssl --enable-rewrite --enable-so
>>> --enable-headers --enable-unique-id
>>>
>>> like i said there is pretty much nothing in the error log for httpd.
>>> it's a brand new install. here is the whole file:
>>>
>>> [Tue Jul 01 22:45:36 2008] [warn] Init: Session Cache is not
>>> configured [hint: SSLSessionCache]
>>> [Tue Jul 01 22:45:37 2008] [notice] Apache/2.2.9 (Unix)
>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>> [Tue Jul 01 22:46:19 2008] [error] [client x.x.x.x] File does not
>>> exist: /usr/web/favicon.ico
>>> [Tue Jul 01 22:50:11 2008] [notice] caught SIGTERM, shutting down
>>> [Tue Jul 01 22:52:33 2008] [warn] Init: Session Cache is not
>>> configured [hint: SSLSessionCache]
>>> [Tue Jul 01 22:52:34 2008] [notice] Apache/2.2.9 (Unix)
>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>> [Tue Jul 01 22:55:29 2008] [notice] caught SIGTERM, shutting down
>>> [Tue Jul 01 22:55:35 2008] [warn] Init: Session Cache is not
>>> configured [hint: SSLSessionCache]
>>> [Tue Jul 01 22:55:36 2008] [notice] Apache/2.2.9 (Unix)
>>> mod_ssl/2.2.9 OpenSSL/0.9.8h configured -- resuming normal operations
>>> [Tue Jul 01 23:00:50 2008] [notice] caught SIGTERM, shutting down
>>> ~
>>> (just changed my ip there)
>>>
>>> i suspect the apache so module...... but not really sure....
>>> executing php files on the cli is working fine to.. it must be the
>>> so...
>>> httpd and php are supposed to just work together..... that's why
>>> core dump without any messages is a bit weired.....
>>>
>>>
>>>
>>> Odhiambo Washington wrote:
>>>> On Wed, Jul 2, 2008 at 8:19 AM, kalin m <ka...@el.net> wrote:
>>>>
>>>>> there is no extensions.ini anywhere on this machine... a brand
>>>>> new one.
>>>>> httpd/logs/error_log has 6 lines in it. something about session
>>>>> cash (SSL)
>>>>> not configured...
>>>>>
>>>>> httpd runs fine without loading the php module....
>>>>>
>>>>
>>>> Would you like to provide details on how you compiled your apache
>>>> then? Did you use the ports to install?
>>>> What options did you compile with?
>>>> What is this that you have in the error_log that you don't want to
>>>> reveal?
>>>>
>>>>
>>>>
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscribe@freebsd.org"
>
> ---------------------------------------------------------------------
> The official User-To-User support forum of the Apache HTTP Server
> Project.
> See <URL:http://httpd.apache.org/userslist.html> for more info.
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> " from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] Re: httpd php dump
Posted by kalin m <ka...@el.net>.
this is getting to ridiculous levels....
if i build php only with --with-apxs2=/etc/httpd/bin/apxs then apache
starts and httpd/php works ok. anything else added to the configuration
- and i tried different stuff - ( --with-mysql=/usr/local/mysql;
--with-curl; --with-openssl=/usr) - alone or in combination builds fine
but at the time of apache startup it dumps core...
apparently the httpd - currently 2.2.9 - configure doesn't matter. so
right now the httpd is configured - as intended - with:
./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
--enable-rewrite --enable-so --enable-headers --enable-unique-id
i tried also with httpd 2.0.63. same thing. i can't imagine anymore what
the hell can it be. i've done many other installs and never had this
things happening.
the machine is freebsd 7. its a 64 bit build on a multiprocessor
machine. dual quad core... and identifies itself as amd64...
i just don't get it....
what to look at?!
thanks...
kalin m wrote:
> i'd be assuming than that i'd need to build an older apache.
> this is probably a stupid question but is there anybody out there that
> is using apache 2.2.9 + php 5.2.6 (as DSO) on freebsd 7 amd64 (multi
> processor) without problems?
>
> thanks...
>
>
>
> kalin m wrote:
>> sure.
>>
>> ./configure --prefix=/etc/httpd --enable-ssl
>> --with-ssl=/usr/local/ssl --enable-rewrite --enable-so
>> --enable-headers --enable-unique-id
>>
>> like i said there is pretty much nothing in the error log for httpd.
>> it's a brand new install. here is the whole file:
>>
>> [Tue Jul 01 22:45:36 2008] [warn] Init: Session Cache is not
>> configured [hint: SSLSessionCache]
>> [Tue Jul 01 22:45:37 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
>> OpenSSL/0.9.8h configured -- resuming normal operations
>> [Tue Jul 01 22:46:19 2008] [error] [client x.x.x.x] File does not
>> exist: /usr/web/favicon.ico
>> [Tue Jul 01 22:50:11 2008] [notice] caught SIGTERM, shutting down
>> [Tue Jul 01 22:52:33 2008] [warn] Init: Session Cache is not
>> configured [hint: SSLSessionCache]
>> [Tue Jul 01 22:52:34 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
>> OpenSSL/0.9.8h configured -- resuming normal operations
>> [Tue Jul 01 22:55:29 2008] [notice] caught SIGTERM, shutting down
>> [Tue Jul 01 22:55:35 2008] [warn] Init: Session Cache is not
>> configured [hint: SSLSessionCache]
>> [Tue Jul 01 22:55:36 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
>> OpenSSL/0.9.8h configured -- resuming normal operations
>> [Tue Jul 01 23:00:50 2008] [notice] caught SIGTERM, shutting down
>> ~
>> (just changed my ip there)
>>
>> i suspect the apache so module...... but not really sure....
>> executing php files on the cli is working fine to.. it must be the so...
>> httpd and php are supposed to just work together..... that's why
>> core dump without any messages is a bit weired.....
>>
>>
>>
>> Odhiambo Washington wrote:
>>> On Wed, Jul 2, 2008 at 8:19 AM, kalin m <ka...@el.net> wrote:
>>>
>>>> there is no extensions.ini anywhere on this machine... a brand new
>>>> one.
>>>> httpd/logs/error_log has 6 lines in it. something about session
>>>> cash (SSL)
>>>> not configured...
>>>>
>>>> httpd runs fine without loading the php module....
>>>>
>>>
>>> Would you like to provide details on how you compiled your apache
>>> then? Did you use the ports to install?
>>> What options did you compile with?
>>> What is this that you have in the error_log that you don't want to
>>> reveal?
>>>
>>>
>>>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
" from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org
Re: [users@httpd] Re: httpd php dump
Posted by kalin m <ka...@el.net>.
i'd be assuming than that i'd need to build an older apache.
this is probably a stupid question but is there anybody out there that
is using apache 2.2.9 + php 5.2.6 (as DSO) on freebsd 7 amd64 (multi
processor) without problems?
thanks...
kalin m wrote:
> sure.
>
> ./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
> --enable-rewrite --enable-so --enable-headers --enable-unique-id
>
> like i said there is pretty much nothing in the error log for httpd.
> it's a brand new install. here is the whole file:
>
> [Tue Jul 01 22:45:36 2008] [warn] Init: Session Cache is not
> configured [hint: SSLSessionCache]
> [Tue Jul 01 22:45:37 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
> OpenSSL/0.9.8h configured -- resuming normal operations
> [Tue Jul 01 22:46:19 2008] [error] [client x.x.x.x] File does not
> exist: /usr/web/favicon.ico
> [Tue Jul 01 22:50:11 2008] [notice] caught SIGTERM, shutting down
> [Tue Jul 01 22:52:33 2008] [warn] Init: Session Cache is not
> configured [hint: SSLSessionCache]
> [Tue Jul 01 22:52:34 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
> OpenSSL/0.9.8h configured -- resuming normal operations
> [Tue Jul 01 22:55:29 2008] [notice] caught SIGTERM, shutting down
> [Tue Jul 01 22:55:35 2008] [warn] Init: Session Cache is not
> configured [hint: SSLSessionCache]
> [Tue Jul 01 22:55:36 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
> OpenSSL/0.9.8h configured -- resuming normal operations
> [Tue Jul 01 23:00:50 2008] [notice] caught SIGTERM, shutting down
> ~
> (just changed my ip there)
>
> i suspect the apache so module...... but not really sure....
> executing php files on the cli is working fine to.. it must be the so...
>
> httpd and php are supposed to just work together.....
> that's why core dump without any messages is a bit weired.....
>
>
>
> Odhiambo Washington wrote:
>> On Wed, Jul 2, 2008 at 8:19 AM, kalin m <ka...@el.net> wrote:
>>
>>> there is no extensions.ini anywhere on this machine... a brand new one.
>>> httpd/logs/error_log has 6 lines in it. something about session cash (SSL)
>>> not configured...
>>>
>>> httpd runs fine without loading the php module....
>>>
>>
>> Would you like to provide details on how you compiled your apache
>> then? Did you use the ports to install?
>> What options did you compile with?
>> What is this that you have in the error_log that you don't want to reveal?
>>
>>
>>
[users@httpd] Re: httpd php dump
Posted by kalin m <ka...@el.net>.
sure.
./configure --prefix=/etc/httpd --enable-ssl --with-ssl=/usr/local/ssl
--enable-rewrite --enable-so --enable-headers --enable-unique-id
like i said there is pretty much nothing in the error log for httpd.
it's a brand new install. here is the whole file:
[Tue Jul 01 22:45:36 2008] [warn] Init: Session Cache is not configured
[hint: SSLSessionCache]
[Tue Jul 01 22:45:37 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
OpenSSL/0.9.8h configured -- resuming normal operations
[Tue Jul 01 22:46:19 2008] [error] [client x.x.x.x] File does not exist:
/usr/web/favicon.ico
[Tue Jul 01 22:50:11 2008] [notice] caught SIGTERM, shutting down
[Tue Jul 01 22:52:33 2008] [warn] Init: Session Cache is not configured
[hint: SSLSessionCache]
[Tue Jul 01 22:52:34 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
OpenSSL/0.9.8h configured -- resuming normal operations
[Tue Jul 01 22:55:29 2008] [notice] caught SIGTERM, shutting down
[Tue Jul 01 22:55:35 2008] [warn] Init: Session Cache is not configured
[hint: SSLSessionCache]
[Tue Jul 01 22:55:36 2008] [notice] Apache/2.2.9 (Unix) mod_ssl/2.2.9
OpenSSL/0.9.8h configured -- resuming normal operations
[Tue Jul 01 23:00:50 2008] [notice] caught SIGTERM, shutting down
~
(just changed my ip there)
i suspect the apache so module...... but not really sure.... executing
php files on the cli is working fine to.. it must be the so...
httpd and php are supposed to just work together.....
that's why core dump without any messages is a bit weired.....
Odhiambo Washington wrote:
> On Wed, Jul 2, 2008 at 8:19 AM, kalin m <ka...@el.net> wrote:
>
>> there is no extensions.ini anywhere on this machine... a brand new one.
>> httpd/logs/error_log has 6 lines in it. something about session cash (SSL)
>> not configured...
>>
>> httpd runs fine without loading the php module....
>>
>
> Would you like to provide details on how you compiled your apache
> then? Did you use the ports to install?
> What options did you compile with?
> What is this that you have in the error_log that you don't want to reveal?
>
>
>