You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by ustcweizhou <gi...@git.apache.org> on 2015/10/29 14:21:33 UTC
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
GitHub user ustcweizhou opened a pull request:
https://github.com/apache/cloudstack/pull/1007
CLOUDSTACK-8958: add dedicated ips to domain (account for now)
For now, we dedicate ip pool to account, however, other accounts in the same domain cannot fetch the ip from this ip pool.
By dedicating ip pool to domain, accounts in the domain can fetch the public ip from same ip pool.
You can merge this pull request into a Git repository by running:
$ git pull https://github.com/ustcweizhou/cloudstack dedicated-ip-for-domain
Alternatively you can review and apply these changes as the patch at:
https://github.com/apache/cloudstack/pull/1007.patch
To close this pull request, make a commit to your master/trunk branch
with (at least) the following in the commit message:
This closes #1007
----
commit cf39ff300e476a565c73ddf159ff836d52b6ae44
Author: Wei Zhou <w....@tech.leaseweb.com>
Date: 2015-08-10T13:05:04Z
CLOUDSTACK-8958: add dedicated ips to domain (account for now)
----
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
Posted by borisroman <gi...@git.apache.org>.
Github user borisroman commented on the pull request:
https://github.com/apache/cloudstack/pull/1007#issuecomment-153157118
@remibergsma LGMT :+1: Reviewed the code and run the vm_lifecycle_test.
```
nosetests --with-marvin --marvin-config=/data/shared/marvin/mct-zone1-kvm1-basic.cfg -s -a tags=basic,required_hardware=false smoke/test_vm_life_cycle.py
```
```
==== Marvin Init Successful ====
=== TestName: test_deploy_vm | Status : SUCCESS ===
=== TestName: test_deploy_vm_multiple | Status : SUCCESS ===
=== TestName: test_01_stop_vm | Status : SUCCESS ===
=== TestName: test_02_start_vm | Status : SUCCESS ===
=== TestName: test_03_reboot_vm | Status : SUCCESS ===
=== TestName: test_06_destroy_vm | Status : SUCCESS ===
=== TestName: test_07_restore_vm | Status : SUCCESS ===
=== TestName: test_09_expunge_vm | Status : SUCCESS ===
===final results are now copied to: /tmp//MarvinLogs/test_vm_life_cycle_NDBDEC===
```
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
Posted by koushik-das <gi...@git.apache.org>.
Github user koushik-das commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1007#discussion_r43845446
--- Diff: server/src/com/cloud/configuration/ConfigurationManagerImpl.java ---
@@ -3310,13 +3331,19 @@ public Vlan dedicatePublicIpRange(final DedicatePublicIpRangeCmd cmd) throws Res
vlanOwner = _accountMgr.getAccount(project.getProjectAccountId());
}
+ Domain domain = null;
if (accountName != null && domainId != null) {
vlanOwner = _accountDao.findActiveAccount(accountName, domainId);
- }
- if (vlanOwner == null) {
- throw new InvalidParameterValueException("Unable to find account by name " + accountName);
- } else if (vlanOwner.getId() == Account.ACCOUNT_ID_SYSTEM) {
- throw new InvalidParameterValueException("Please specify a valid account. Cannot dedicate IP range to system account");
+ if (vlanOwner == null) {
--- End diff --
vlanOwner check is now done only when account is specified. What about the project case which also can set the vlanOwner?
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1007#discussion_r46089078
--- Diff: server/src/com/cloud/configuration/ConfigurationManagerImpl.java ---
@@ -3310,13 +3331,19 @@ public Vlan dedicatePublicIpRange(final DedicatePublicIpRangeCmd cmd) throws Res
vlanOwner = _accountMgr.getAccount(project.getProjectAccountId());
}
+ Domain domain = null;
if (accountName != null && domainId != null) {
vlanOwner = _accountDao.findActiveAccount(accountName, domainId);
- }
- if (vlanOwner == null) {
- throw new InvalidParameterValueException("Unable to find account by name " + accountName);
- } else if (vlanOwner.getId() == Account.ACCOUNT_ID_SYSTEM) {
- throw new InvalidParameterValueException("Please specify a valid account. Cannot dedicate IP range to system account");
+ if (vlanOwner == null) {
--- End diff --
Looks like the project case is handled by 89ce8bd9e289327f411790eb05a9fb49ef1f9a2f. Since all tests pass, I will merge this now. Future adjustments can be made in a separate PR.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1007#discussion_r46066286
--- Diff: server/src/com/cloud/configuration/ConfigurationManagerImpl.java ---
@@ -3310,13 +3331,19 @@ public Vlan dedicatePublicIpRange(final DedicatePublicIpRangeCmd cmd) throws Res
vlanOwner = _accountMgr.getAccount(project.getProjectAccountId());
}
+ Domain domain = null;
if (accountName != null && domainId != null) {
vlanOwner = _accountDao.findActiveAccount(accountName, domainId);
- }
- if (vlanOwner == null) {
- throw new InvalidParameterValueException("Unable to find account by name " + accountName);
- } else if (vlanOwner.getId() == Account.ACCOUNT_ID_SYSTEM) {
- throw new InvalidParameterValueException("Please specify a valid account. Cannot dedicate IP range to system account");
+ if (vlanOwner == null) {
--- End diff --
@koushik-das You OK with the PR like it is now? Please review again, thanks!
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
Posted by borisroman <gi...@git.apache.org>.
Github user borisroman commented on the pull request:
https://github.com/apache/cloudstack/pull/1007#issuecomment-153077340
FYI: Running tests on this now
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by asfgit <gi...@git.apache.org>.
Github user asfgit closed the pull request at:
https://github.com/apache/cloudstack/pull/1007
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by ustcweizhou <gi...@git.apache.org>.
Github user ustcweizhou commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1007#discussion_r45596255
--- Diff: server/src/com/cloud/configuration/ConfigurationManagerImpl.java ---
@@ -3310,13 +3331,19 @@ public Vlan dedicatePublicIpRange(final DedicatePublicIpRangeCmd cmd) throws Res
vlanOwner = _accountMgr.getAccount(project.getProjectAccountId());
}
+ Domain domain = null;
if (accountName != null && domainId != null) {
vlanOwner = _accountDao.findActiveAccount(accountName, domainId);
- }
- if (vlanOwner == null) {
- throw new InvalidParameterValueException("Unable to find account by name " + accountName);
- } else if (vlanOwner.getId() == Account.ACCOUNT_ID_SYSTEM) {
- throw new InvalidParameterValueException("Please specify a valid account. Cannot dedicate IP range to system account");
+ if (vlanOwner == null) {
--- End diff --
@remibergsma I added a second commit to fix it. However, it did not touch these codes, but code before these.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
Posted by bhaisaab <gi...@git.apache.org>.
Github user bhaisaab commented on the pull request:
https://github.com/apache/cloudstack/pull/1007#issuecomment-153683174
LGTM
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1007#discussion_r45595780
--- Diff: server/src/com/cloud/configuration/ConfigurationManagerImpl.java ---
@@ -3310,13 +3331,19 @@ public Vlan dedicatePublicIpRange(final DedicatePublicIpRangeCmd cmd) throws Res
vlanOwner = _accountMgr.getAccount(project.getProjectAccountId());
}
+ Domain domain = null;
if (accountName != null && domainId != null) {
vlanOwner = _accountDao.findActiveAccount(accountName, domainId);
- }
- if (vlanOwner == null) {
- throw new InvalidParameterValueException("Unable to find account by name " + accountName);
- } else if (vlanOwner.getId() == Account.ACCOUNT_ID_SYSTEM) {
- throw new InvalidParameterValueException("Please specify a valid account. Cannot dedicate IP range to system account");
+ if (vlanOwner == null) {
--- End diff --
@ustcweizhou This PR is almost ready to be merged. Please respond to comments above.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-8958: add dedicated ips to dom...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on the pull request:
https://github.com/apache/cloudstack/pull/1007#issuecomment-152453373
LGTM, based on a set of tests that I run on this branch (which I rebased myself first):
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_vpc_redundant.py \
component/test_routers_iptables_default_policy.py \
component/test_routers_network_ops.py \
component/test_vpc_router_nics.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_network.py
```
Result:
```
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and check default routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Stop existing router, add a PF rule and check we can access the VM ... === TestName: test_isolate_network_FW_PF_default_routes | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_RVR_Network_FW_PF_SSH_default_routes | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 27 tests in 11840.093s
OK
```
And:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_privategw_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_vpc_vpn.py \
smoke/test_service_offerings.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py
```
Result:
```
Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_privategw_acl | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
ok
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 44 tests in 8951.129s
OK
```
These test do not cover your change, all they do is show you didn't break them. Someone else needs to review the code.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: [4.7] CLOUDSTACK-8958: add dedicated ips ...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on the pull request:
https://github.com/apache/cloudstack/pull/1007#issuecomment-158914722
Repeated the tests due to new commits:
LGTM based on these tests:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_vpc_redundant.py \
component/test_routers_iptables_default_policy.py \
component/test_routers_network_ops.py \
component/test_vpc_router_nics.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_network.py
```
Result:
```
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Check the password file in the Router VM ... === TestName: test_isolate_network_password_server | Status : SUCCESS ===
ok
Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 33 tests in 168011.715s
OK
```
And:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_privategw_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_vpc_vpn.py \
smoke/test_service_offerings.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py
```
Result:
```
Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_privategw_acl | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 42 tests in 8645.217s
OK
```
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---