You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-user@axis.apache.org by vijay ponnavolu <vp...@yahoo.com> on 2004/10/25 21:16:21 UTC
newbie running samples
Hi,
I am tunning Axis-1.3 on Redhat 7.3 and I am using
Apache 2.05, expat 1.95.
I have the environ. var AXISCPP_HOME and
AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing to right
dirs.
I am trying to run the sample ..bin/base which was
intalled by compiling and installing Axis from
scratch(not the binaries).
I get the error:
"AxisTransportException: HTTP transport Error not
found"
and if I run it as ...bin/base <ipaads>:port to whihc
apache has been configured it says:
"AxisTransportException: Cannot open channel to remote
end, shutting down channel"
Anyone willing to shed some light on why these errors
are showing up.
Thank in advance,
vijay
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
Re: newbie running samples
Posted by vijay ponnavolu <vp...@yahoo.com>.
my fault it works now ..
--vijay
--- Samisa Abeysinghe <sa...@yahoo.com>
wrote:
> Hi Vijay,
> Try running the sample as:
> ./base http://<ipadds>:9000/axis/base
>
> That should work.
> Thanks,
> Samisa...
>
> --- vijay ponnavolu <vp...@yahoo.com> wrote:
>
> > Hi Samisa,
> >
> > I have configured my apache to port 9000, I have
> tried
> > http://<ipadds>:9000/axis and it displays the axis
> > page.
> >
> > --vijay
> > --- Samisa Abeysinghe
> <sa...@yahoo.com>
> > wrote:
> >
> > > Have you accessed the http://localhost/axis with
> > > your browser and verified that the server is
> > > running OK?
> > >
> > > Looking at the error:
> > > > "AxisTransportException: HTTP transport Error
> not
> > > > found"
> > >
> > > It is most likely that the web server is sending
> an
> > > error with "not found" message.
> > > This happens if your web server cannot resolve
> the
> > > URL given by Axis client.
> > >
> > > In case you try to access base
> > > http://localhost/axis/ with browser and run into
> > > problems; See if
> > > you have the server.wsdd file in the correct
> > > location as specified by
> > > $AXISCPP_DEPLOY/etc/axiscpp.conf; Also check if
> the
> > > lib path names given in server.wsdd are
> > > correct.
> > >
> > > Assuming that you are using 1.3 final release,
> try
> > > running:
> > > ./base http://localhost/axis/base
> > >
> > > Note that you have to give the full end point
> URL.
> > >
> > > Alternatively, Axis C++ 1.3 comes with
> > > simple_axis_server.
> > > You could run that and see if that works.
> > >
> > > See section 11 of
> > >
> http://ws.apache.org/axis/cpp/lininstall-guide.html
> > > for info on how to get
> > > simple axis server working.
> > >
> > > Thanks,
> > > Samisa...
> > >
> > > --- vijay ponnavolu <vp...@yahoo.com>
> wrote:
> > >
> > > > Hi,
> > > >
> > > > I am tunning Axis-1.3 on Redhat 7.3 and I am
> using
> > > > Apache 2.05, expat 1.95.
> > > >
> > > > I have the environ. var AXISCPP_HOME and
> > > > AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing
> to
> > > right
> > > > dirs.
> > > >
> > > > I am trying to run the sample ..bin/base which
> was
> > > > intalled by compiling and installing Axis from
> > > > scratch(not the binaries).
> > > >
> > > > I get the error:
> > > >
> > > > "AxisTransportException: HTTP transport Error
> not
> > > > found"
> > > >
> > > > and if I run it as ...bin/base <ipaads>:port
> to
> > > whihc
> > > > apache has been configured it says:
> > > >
> > > > "AxisTransportException: Cannot open channel
> to
> > > remote
> > > > end, shutting down channel"
> > > >
> > > > Anyone willing to shed some light on why these
> > > errors
> > > > are showing up.
> > > >
> > > > Thank in advance,
> > > > vijay
> > > >
> > > >
> > > >
> > > > _______________________________
> > > > Do you Yahoo!?
> > > > Declare Yourself - Register online to vote
> today!
> > > > http://vote.yahoo.com
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail Address AutoComplete - You start. We
> > > finish.
> > > http://promotions.yahoo.com/new_mail
> > >
> >
> >
> >
> >
> > _______________________________
> > Do you Yahoo!?
> > Express yourself with Y! Messenger! Free. Download
> now.
> > http://messenger.yahoo.com
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We
> finish.
> http://promotions.yahoo.com/new_mail
>
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
Re: newbie running samples
Posted by vijay ponnavolu <vp...@yahoo.com>.
Hi Samisa,
I tried that it still gives the error,
it says
using service at http://<ipadds>:9000/axis/base
Invoking echoString....
Exception: AxisTransportExcetion Cannot open a channel
to the remote end, shutting down the channel.
I can still see the Axis web page though.
--vijay
--- Samisa Abeysinghe <sa...@yahoo.com>
wrote:
> Hi Vijay,
> Try running the sample as:
> ./base http://<ipadds>:9000/axis/base
>
> That should work.
> Thanks,
> Samisa...
>
> --- vijay ponnavolu <vp...@yahoo.com> wrote:
>
> > Hi Samisa,
> >
> > I have configured my apache to port 9000, I have
> tried
> > http://<ipadds>:9000/axis and it displays the axis
> > page.
> >
> > --vijay
> > --- Samisa Abeysinghe
> <sa...@yahoo.com>
> > wrote:
> >
> > > Have you accessed the http://localhost/axis with
> > > your browser and verified that the server is
> > > running OK?
> > >
> > > Looking at the error:
> > > > "AxisTransportException: HTTP transport Error
> not
> > > > found"
> > >
> > > It is most likely that the web server is sending
> an
> > > error with "not found" message.
> > > This happens if your web server cannot resolve
> the
> > > URL given by Axis client.
> > >
> > > In case you try to access base
> > > http://localhost/axis/ with browser and run into
> > > problems; See if
> > > you have the server.wsdd file in the correct
> > > location as specified by
> > > $AXISCPP_DEPLOY/etc/axiscpp.conf; Also check if
> the
> > > lib path names given in server.wsdd are
> > > correct.
> > >
> > > Assuming that you are using 1.3 final release,
> try
> > > running:
> > > ./base http://localhost/axis/base
> > >
> > > Note that you have to give the full end point
> URL.
> > >
> > > Alternatively, Axis C++ 1.3 comes with
> > > simple_axis_server.
> > > You could run that and see if that works.
> > >
> > > See section 11 of
> > >
> http://ws.apache.org/axis/cpp/lininstall-guide.html
> > > for info on how to get
> > > simple axis server working.
> > >
> > > Thanks,
> > > Samisa...
> > >
> > > --- vijay ponnavolu <vp...@yahoo.com>
> wrote:
> > >
> > > > Hi,
> > > >
> > > > I am tunning Axis-1.3 on Redhat 7.3 and I am
> using
> > > > Apache 2.05, expat 1.95.
> > > >
> > > > I have the environ. var AXISCPP_HOME and
> > > > AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing
> to
> > > right
> > > > dirs.
> > > >
> > > > I am trying to run the sample ..bin/base which
> was
> > > > intalled by compiling and installing Axis from
> > > > scratch(not the binaries).
> > > >
> > > > I get the error:
> > > >
> > > > "AxisTransportException: HTTP transport Error
> not
> > > > found"
> > > >
> > > > and if I run it as ...bin/base <ipaads>:port
> to
> > > whihc
> > > > apache has been configured it says:
> > > >
> > > > "AxisTransportException: Cannot open channel
> to
> > > remote
> > > > end, shutting down channel"
> > > >
> > > > Anyone willing to shed some light on why these
> > > errors
> > > > are showing up.
> > > >
> > > > Thank in advance,
> > > > vijay
> > > >
> > > >
> > > >
> > > > _______________________________
> > > > Do you Yahoo!?
> > > > Declare Yourself - Register online to vote
> today!
> > > > http://vote.yahoo.com
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail Address AutoComplete - You start. We
> > > finish.
> > > http://promotions.yahoo.com/new_mail
> > >
> >
> >
> >
> >
> > _______________________________
> > Do you Yahoo!?
> > Express yourself with Y! Messenger! Free. Download
> now.
> > http://messenger.yahoo.com
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We
> finish.
> http://promotions.yahoo.com/new_mail
>
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
Re: newbie running samples
Posted by Samisa Abeysinghe <sa...@yahoo.com>.
Hi Vijay,
Try running the sample as:
./base http://<ipadds>:9000/axis/base
That should work.
Thanks,
Samisa...
--- vijay ponnavolu <vp...@yahoo.com> wrote:
> Hi Samisa,
>
> I have configured my apache to port 9000, I have tried
> http://<ipadds>:9000/axis and it displays the axis
> page.
>
> --vijay
> --- Samisa Abeysinghe <sa...@yahoo.com>
> wrote:
>
> > Have you accessed the http://localhost/axis with
> > your browser and verified that the server is
> > running OK?
> >
> > Looking at the error:
> > > "AxisTransportException: HTTP transport Error not
> > > found"
> >
> > It is most likely that the web server is sending an
> > error with "not found" message.
> > This happens if your web server cannot resolve the
> > URL given by Axis client.
> >
> > In case you try to access base
> > http://localhost/axis/ with browser and run into
> > problems; See if
> > you have the server.wsdd file in the correct
> > location as specified by
> > $AXISCPP_DEPLOY/etc/axiscpp.conf; Also check if the
> > lib path names given in server.wsdd are
> > correct.
> >
> > Assuming that you are using 1.3 final release, try
> > running:
> > ./base http://localhost/axis/base
> >
> > Note that you have to give the full end point URL.
> >
> > Alternatively, Axis C++ 1.3 comes with
> > simple_axis_server.
> > You could run that and see if that works.
> >
> > See section 11 of
> > http://ws.apache.org/axis/cpp/lininstall-guide.html
> > for info on how to get
> > simple axis server working.
> >
> > Thanks,
> > Samisa...
> >
> > --- vijay ponnavolu <vp...@yahoo.com> wrote:
> >
> > > Hi,
> > >
> > > I am tunning Axis-1.3 on Redhat 7.3 and I am using
> > > Apache 2.05, expat 1.95.
> > >
> > > I have the environ. var AXISCPP_HOME and
> > > AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing to
> > right
> > > dirs.
> > >
> > > I am trying to run the sample ..bin/base which was
> > > intalled by compiling and installing Axis from
> > > scratch(not the binaries).
> > >
> > > I get the error:
> > >
> > > "AxisTransportException: HTTP transport Error not
> > > found"
> > >
> > > and if I run it as ...bin/base <ipaads>:port to
> > whihc
> > > apache has been configured it says:
> > >
> > > "AxisTransportException: Cannot open channel to
> > remote
> > > end, shutting down channel"
> > >
> > > Anyone willing to shed some light on why these
> > errors
> > > are showing up.
> > >
> > > Thank in advance,
> > > vijay
> > >
> > >
> > >
> > > _______________________________
> > > Do you Yahoo!?
> > > Declare Yourself - Register online to vote today!
> > > http://vote.yahoo.com
> > >
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Address AutoComplete - You start. We
> > finish.
> > http://promotions.yahoo.com/new_mail
> >
>
>
>
>
> _______________________________
> Do you Yahoo!?
> Express yourself with Y! Messenger! Free. Download now.
> http://messenger.yahoo.com
>
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
Re: newbie running samples
Posted by vijay ponnavolu <vp...@yahoo.com>.
Hi Samisa,
I have configured my apache to port 9000, I have tried
http://<ipadds>:9000/axis and it displays the axis
page.
--vijay
--- Samisa Abeysinghe <sa...@yahoo.com>
wrote:
> Have you accessed the http://localhost/axis with
> your browser and verified that the server is
> running OK?
>
> Looking at the error:
> > "AxisTransportException: HTTP transport Error not
> > found"
>
> It is most likely that the web server is sending an
> error with "not found" message.
> This happens if your web server cannot resolve the
> URL given by Axis client.
>
> In case you try to access base
> http://localhost/axis/ with browser and run into
> problems; See if
> you have the server.wsdd file in the correct
> location as specified by
> $AXISCPP_DEPLOY/etc/axiscpp.conf; Also check if the
> lib path names given in server.wsdd are
> correct.
>
> Assuming that you are using 1.3 final release, try
> running:
> ./base http://localhost/axis/base
>
> Note that you have to give the full end point URL.
>
> Alternatively, Axis C++ 1.3 comes with
> simple_axis_server.
> You could run that and see if that works.
>
> See section 11 of
> http://ws.apache.org/axis/cpp/lininstall-guide.html
> for info on how to get
> simple axis server working.
>
> Thanks,
> Samisa...
>
> --- vijay ponnavolu <vp...@yahoo.com> wrote:
>
> > Hi,
> >
> > I am tunning Axis-1.3 on Redhat 7.3 and I am using
> > Apache 2.05, expat 1.95.
> >
> > I have the environ. var AXISCPP_HOME and
> > AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing to
> right
> > dirs.
> >
> > I am trying to run the sample ..bin/base which was
> > intalled by compiling and installing Axis from
> > scratch(not the binaries).
> >
> > I get the error:
> >
> > "AxisTransportException: HTTP transport Error not
> > found"
> >
> > and if I run it as ...bin/base <ipaads>:port to
> whihc
> > apache has been configured it says:
> >
> > "AxisTransportException: Cannot open channel to
> remote
> > end, shutting down channel"
> >
> > Anyone willing to shed some light on why these
> errors
> > are showing up.
> >
> > Thank in advance,
> > vijay
> >
> >
> >
> > _______________________________
> > Do you Yahoo!?
> > Declare Yourself - Register online to vote today!
> > http://vote.yahoo.com
> >
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We
> finish.
> http://promotions.yahoo.com/new_mail
>
_______________________________
Do you Yahoo!?
Express yourself with Y! Messenger! Free. Download now.
http://messenger.yahoo.com
Re: newbie running samples
Posted by Samisa Abeysinghe <sa...@yahoo.com>.
Have you accessed the http://localhost/axis with your browser and verified that the server is
running OK?
Looking at the error:
> "AxisTransportException: HTTP transport Error not
> found"
It is most likely that the web server is sending an error with "not found" message.
This happens if your web server cannot resolve the URL given by Axis client.
In case you try to access base http://localhost/axis/ with browser and run into problems; See if
you have the server.wsdd file in the correct location as specified by
$AXISCPP_DEPLOY/etc/axiscpp.conf; Also check if the lib path names given in server.wsdd are
correct.
Assuming that you are using 1.3 final release, try running:
./base http://localhost/axis/base
Note that you have to give the full end point URL.
Alternatively, Axis C++ 1.3 comes with simple_axis_server.
You could run that and see if that works.
See section 11 of http://ws.apache.org/axis/cpp/lininstall-guide.html for info on how to get
simple axis server working.
Thanks,
Samisa...
--- vijay ponnavolu <vp...@yahoo.com> wrote:
> Hi,
>
> I am tunning Axis-1.3 on Redhat 7.3 and I am using
> Apache 2.05, expat 1.95.
>
> I have the environ. var AXISCPP_HOME and
> AXISCPP_DEPLOY, and LD_LIBRARY_PATH pointing to right
> dirs.
>
> I am trying to run the sample ..bin/base which was
> intalled by compiling and installing Axis from
> scratch(not the binaries).
>
> I get the error:
>
> "AxisTransportException: HTTP transport Error not
> found"
>
> and if I run it as ...bin/base <ipaads>:port to whihc
> apache has been configured it says:
>
> "AxisTransportException: Cannot open channel to remote
> end, shutting down channel"
>
> Anyone willing to shed some light on why these errors
> are showing up.
>
> Thank in advance,
> vijay
>
>
>
> _______________________________
> Do you Yahoo!?
> Declare Yourself - Register online to vote today!
> http://vote.yahoo.com
>
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail