You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Patrick Bégou <Pa...@legi.grenoble-inp.fr> on 2020/03/15 11:02:22 UTC
Deploying Openmeeting 5 on Centos7
Hi,
I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
"Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
I'm stalled at te step opening the browser on
https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
I do not know tomcat at all, I've just changed the starting setup with
export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
Any help appreciated and advices to make openmeeting listening on port
80 or 443 to finalize the setup.
Patrick
Re: Deploying Openmeeting 5 on Centos7
Posted by Maxim Solodovnik <so...@gmail.com>.
Browser blocks access to camera/microphone for HTTP sites ...
On Mon, 16 Mar 2020 at 18:46, Patrick Bégou <
Patrick.Begou@legi.grenoble-inp.fr> wrote:
> I'Hello Hoschie,
>
> I'm only using vistualization for the remote openmeetings server, based on
> proxmox (full virtualization).
> On my laptop client it is a basic CentOS7 install. The webcam seams
> working as cheese application can use it.
> That looks strange for me is that the menus for selecting mic or cam only
> provide a "select language" information.
>
>
> Patrick
>
> Le 16/03/2020 à 10:34, Stefan Kühl a écrit :
>
> Hey @all,
>
> what kind of vitrualizing software do you use?
>
> As far as I know is it for OM4 necessary that the cam and headset were
> assigned to the vm and not to the host.
>
> Greetz
>
> Hoschie
>
>
>
> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>
> i have same problem on my ubuntu
>
>
>
>
>
>
> Sansão Machiana
>
> *FUNAE - Fundo de Energia*
>
> *Unidade de Tecnologias de Informação e Comunicação*
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
>
> Maputo - Moçambique
>
>
>
>
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
> ------------------------------
> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> <Pa...@legi.grenoble-inp.fr>
> *Enviado:* 16 de março de 2020 11:15
> *Para:* Openmeetings user-list
> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>
> Hi,
>
> I fnaly install openmeetings-4.0.10. The server seams to run fine on the
> CentOS7 VM. I create my first user and try to connect from outside. IThere
> is a firewall and only port 80 is open by the lab. So in
> /opt/red54010/conf/red5.properties i've set http.port=80 and now I can
> login from home in openmeeting.
> But when testing the camera and the microphone I only have "select your
> langage" option ??? see the screen dump attached. My laptop is CentOS7. Is
> there some additional software to deploy for the clients ?
>
> I'm a little bit lost....
>
> Thanks for your help
>
> Patrick
>
>
>
>
> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>
> Hi,
>
> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>
> I'm stalled at te step opening the browser onhttps://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>
> I do not know tomcat at all, I've just changed the starting setup with
>
> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>
> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>
> Any help appreciated and advices to make openmeeting listening on port
> 80 or 443 to finalize the setup.
>
> Patrick
>
>
>
>
>
> ------------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e
> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
> notificado de que qualquer divulgação, distribuição ou reprodução do
> respectivo conteúdo é expressa e estritamente proibida.
>
> The information contained in this e-mail is privileged and confidential
> and is intended only for the use of the individual or entity named above.
> If the reader of this message is not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this
> communication is strictly prohibited.
>
>
>
--
WBR
Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Patrick Bégou <Pa...@legi.grenoble-inp.fr>.
I'Hello Hoschie,
I'm only using vistualization for the remote openmeetings server, based
on proxmox (full virtualization).
On my laptop client it is a basic CentOS7 install. The webcam seams
working as cheese application can use it.
That looks strange for me is that the menus for selecting mic or cam
only provide a "select language" information.
Patrick
Le 16/03/2020 à 10:34, Stefan Kühl a écrit :
>
> Hey @all,
>
> what kind of vitrualizing software do you use?
>
> As far as I know is it for OM4 necessary that the cam and headset were
> assigned to the vm and not to the host.
>
> Greetz
>
> Hoschie
>
>
>
>
> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>
>> i have same problem on my ubuntu
>>
>>
>>
>>
>>
>>
>>
>> Sansão Machiana
>>
>> *FUNAE - Fundo de Energia*
>>
>> *Unidade de Tecnologias de Informação e Comunicação*
>>
>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>
>> Tel. +258 21 304717/+258 21 304720
>>
>> E-mail: sansaomachiana@funae.co.mz
>>
>> Maputo - Moçambique
>>
>>
>>
>>
>>
>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>
>> ------------------------------------------------------------------------
>> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
>> *Enviado:* 16 de março de 2020 11:15
>> *Para:* Openmeetings user-list
>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>
>> Hi,
>>
>> I fnaly install openmeetings-4.0.10. The server seams to run fine on
>> the CentOS7 VM. I create my first user and try to connect from
>> outside. IThere is a firewall and only port 80 is open by the lab. So
>> in /opt/red54010/conf/red5.properties i've set http.port=80 and now I
>> can login from home in openmeeting.
>> But when testing the camera and the microphone I only have "select
>> your langage" option ??? see the screen dump attached. My laptop is
>> CentOS7. Is there some additional software to deploy for the clients ?
>>
>> I'm a little bit lost....
>>
>> Thanks for your help
>>
>> Patrick
>>
>>
>>
>>
>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>> Hi,
>>>
>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>
>>> I'm stalled at te step opening the browser on
>>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>
>>> I do not know tomcat at all, I've just changed the starting setup with
>>>
>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>
>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>
>>> Any help appreciated and advices to make openmeeting listening on port
>>> 80 or 443 to finalize the setup.
>>>
>>> Patrick
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>
>> A informação contida neste correio electrónico é confidencial e
>> privilegiada, destinando-se unicamente à pessoa ou entidade acima
>> indicada. Se o leitor desta mensagem não for o seu destinatário, fica
>> pela presente notificado de que qualquer divulgação, distribuição ou
>> reprodução do respectivo conteúdo é expressa e estritamente proibida.
>>
>> The information contained in this e-mail is privileged and
>> confidential and is intended only for the use of the individual or
>> entity named above. If the reader of this message is not the intended
>> recipient, you are hereby notified that any dissemination,
>> distribution or copying of this communication is strictly prohibited.
Re: Deploying Openmeeting 5 on Centos7
Posted by Maxim Solodovnik <so...@gmail.com>.
(CC user@ list)
this is completely new situation (never saw such behavior before)
Is your system accessible for "foreigners" ? :) if so can you send me a
link (privately) ?
On Wed, 18 Mar 2020 at 00:31, Patrick Bégou <
Patrick.Begou@legi.grenoble-inp.fr> wrote:
> Hi Maxim,
>
> I have created a new user with a fresh setup of firefox: no additionnal
> plugins, only shockwave flash (I have several flash plugins in my setup).
> Now on the right part of the "choose device" window I see the popup
> requesting to allow cam and mic.
> Cam works. Mic doesn't. Button to start recording works and print "5s" on
> the cam view but do not start the count down.
> Tested with internal mic and a USB cam/Mic setup. Cam is alway working,
> microphone never.
> Microphone is functional: using the audio control I can see it working and
> yesterday it was working with a whereby session.
>
> On an apple mac book laptop I have now the same behavior in firefox: video
> but no microphone working.
>
> One step more is done!
>
> Patrick
>
> Le 17/03/2020 à 16:51, Maxim Solodovnik a écrit :
>
> Have you enabled Flash plugin in the browser?
>
> On Tue, 17 Mar 2020 at 22:48, Patrick Bégou <
> Patrick.Begou@legi.grenoble-inp.fr> wrote:
>
>> Hi Maxim,
>>
>> I was successfull to set up https for my server with
>> https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
>> There is a small error in the doc:
>> keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks *-keystorepass
>> *changeit -trustcacerts -file ca.crt
>> should be:
>> keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks *-keypass
>> *changeit -trustcacerts -file ca.crt
>> The -keystorepass option do not exist on my centos7 server for keytool.
>>
>> Camera and microphone are now detected but... not working. The problem si
>> related to the server (tested on Centos7 et Win10 client laptops). When
>> requesting check-up the cam and the mic are found, I allow access but they
>> are not working. The button to launch the test is greyed and behind the
>> text.
>>
>> Some additional setup to encapsulate rtmp in https ? I'm only allowed for
>> http and https access on the openmeetings server. I think I'm not so far to
>> the solution.
>>
>> I provide the startup messages (do not know if it can help) and a screen
>> dump. Tonight I will try to deploy again the openmeetings/ubuntu iso in a
>> new VM.
>>
>> Patrick
>>
>>
>> Root: /opt/red54010
>> Deploy type: bootstrap
>> [INFO] [main] org.red5.server.Launcher - Red5 Server 1.1.0 (
>> https://github.com/Red5)
>> [INFO] [main] org.red5.spring.Red5ApplicationContext -
>> setApplicationContext:
>> org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
>> started on Tue Mar 17 16:29:54 CET 2020
>> [INFO] [main] org.red5.spring.Red5ApplicationContext -
>> Red5ApplicationContext init
>> [INFO] [main] org.red5.spring.Red5ApplicationContext -
>> setApplicationContext:
>> org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
>> started on Tue Mar 17 16:29:54 CET 2020
>> [INFO] [main] org.red5.spring.Red5ApplicationContext -
>> Red5ApplicationContext init
>> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP will be
>> bound to [0.0.0.0:1935]
>> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP Mina
>> Transport Settings
>> Acceptor style: default I/O threads: 8
>> TCP no-delay: true keep-alive: false
>> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Traffic class
>> modification is disabled
>> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Send buffer
>> size: 65536 recv buffer size: 65536 so linger: -1 traffic class: 0
>> [INFO] [main] org.red5.server.ContextLoader - ContextLoader init
>> [INFO] [main] org.red5.server.ContextLoader - Loading: default.context =
>> ${red5.root}/webapps/red5-default.xml =>
>> /opt/red54010/webapps/red5-default.xml
>> [INFO] [main] org.red5.server.Context - Setting parent bean factory as
>> core
>> [INFO] [main] org.red5.net.websocket.WebSocketPlugin - Setting server
>> scope listener
>> [INFO] [main] org.red5.net.websocket.WebSocketPlugin - Got global scope:
>> default
>> [INFO] [main] org.red5.server.plugin.PluginLauncher - Loaded plugin:
>> org.red5.net.websocket.WebSocketPlugin
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Loading Tomcat
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Server root:
>> /opt/red54010
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Config root:
>> /opt/red54010/conf
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Application root:
>> /opt/red54010/webapps
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Starting Tomcat
>> servlet engine
>> mars 17, 2020 4:29:58 PM org.apache.catalina.core.AprLifecycleListener
>> lifecycleEvent
>> INFOS: The APR based Apache Tomcat Native library which allows optimal
>> performance in production environments was not found on the
>> java.library.path: [/opt/red54010/lib/native]
>> [INFO] [main] org.apache.catalina.core.AprLifecycleListener - The APR
>> based Apache Tomcat Native library which allows optimal performance in
>> production environments was not found on the java.library.path:
>> [/opt/red54010/lib/native]
>> mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
>> INFOS: Initializing ProtocolHandler ["http-nio2-0.0.0.0-80"]
>> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
>> ProtocolHandler ["http-nio2-0.0.0.0-80"]
>> mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
>> INFOS: Initializing ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
>> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
>> ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
>> mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardService
>> startInternal
>> INFOS: Starting service [Tomcat]
>> [INFO] [main] org.apache.catalina.core.StandardService - Starting service
>> [Tomcat]
>> mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardEngine
>> startInternal
>> INFOS: Starting Servlet engine: [Apache Tomcat/9.0.29]
>> [INFO] [main] org.apache.catalina.core.StandardEngine - Starting Servlet
>> engine: [Apache Tomcat/9.0.29]
>> mars 17, 2020 4:29:59 PM org.apache.catalina.startup.ContextConfig
>> getDefaultWebXmlFragment
>> INFOS: No global web.xml found
>> [INFO] [main] org.apache.catalina.startup.ContextConfig - No global
>> web.xml found
>> mars 17, 2020 4:29:59 PM org.apache.catalina.core.ApplicationContext log
>> INFOS: No Spring WebApplicationInitializer types detected on classpath
>> [INFO] [main]
>> org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/] - No
>> Spring WebApplicationInitializer types detected on classpath
>>
>> [root@mostvisio conf]#
>> [root@mostvisio conf]#
>> [root@mostvisio conf]# mars 17, 2020 4:33:15 PM
>> org.apache.catalina.util.SessionIdGeneratorBase createSecureRandom
>> AVERTISSEMENT: Creation of SecureRandom instance for session ID
>> generation using [SHA1PRNG] took [195,531] milliseconds.
>> [WARN] [main] org.apache.catalina.util.SessionIdGeneratorBase - Creation
>> of SecureRandom instance for session ID generation using [SHA1PRNG] took
>> [195,531] milliseconds.
>> mars 17, 2020 4:33:17 PM org.apache.catalina.core.ApplicationContext log
>> INFOS: No Spring WebApplicationInitializer types detected on classpath
>> [INFO] [main]
>> org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/openmeetings]
>> - No Spring WebApplicationInitializer types detected on classpath
>> Context init: openmeetings
>> INFO 03-17 16:33:17.573 ROOT:81 [main] - Starting up context:
>> openmeetings
>> Filter init: openmeetings
>> mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractConfigLocator
>> INFOS: Loading 'hazelcast.xml' from the classpath.
>> [INFO] [main] com.hazelcast.config.AbstractConfigLocator - Loading
>> 'hazelcast.xml' from the classpath.
>> mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractXmlConfigHelper
>> AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
>> default
>> [WARN] [main] com.hazelcast.config.AbstractXmlConfigHelper - Name of the
>> hazelcast schema location is incorrect, using default
>> mars 17, 2020 4:33:18 PM com.hazelcast.instance.HazelcastInstanceFactory
>> AVERTISSEMENT: Hazelcast is starting in a Java modular environment (Java
>> 9 and newer) but without proper access to required Java packages. Use
>> additional Java arguments to provide Hazelcast access to Java internal API.
>> The internal API access is used to get the best performance results.
>> Arguments to be used:
>> --add-modules java.se --add-exports
>> java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
>> java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.nio=ALL-UNNAMED
>> --add-opens java.base/sun.nio.ch=ALL-UNNAMED --add-opens
>> java.management/sun.management=ALL-UNNAMED --add-opens
>> jdk.management/com.sun.management.internal=ALL-UNNAMED
>> [WARN] [main] com.hazelcast.instance.HazelcastInstanceFactory - Hazelcast
>> is starting in a Java modular environment (Java 9 and newer) but without
>> proper access to required Java packages. Use additional Java arguments to
>> provide Hazelcast access to Java internal API. The internal API access is
>> used to get the best performance results. Arguments to be used:
>> --add-modules java.se --add-exports
>> java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
>> java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.nio=ALL-UNNAMED
>> --add-opens java.base/sun.nio.ch=ALL-UNNAMED --add-opens
>> java.management/sun.management=ALL-UNNAMED --add-opens
>> jdk.management/com.sun.management.internal=ALL-UNNAMED
>> mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
>> INFOS: [LOCAL] [dev] [3.12] Prefer IPv4 stack is true, prefer IPv6
>> addresses is false
>> [INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev] [3.12]
>> Prefer IPv4 stack is true, prefer IPv6 addresses is false
>> mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
>> INFOS: [LOCAL] [dev] [3.12] Picked [194.254.67.10]:5701, using socket
>> ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
>> [INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev] [3.12]
>> Picked [194.254.67.10]:5701, using socket
>> ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
>> mars 17, 2020 4:33:18 PM com.hazelcast.system
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Hazelcast 3.12 (20190409 -
>> 915d83a) starting at [194.254.67.10]:5701
>> [INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
>> Hazelcast 3.12 (20190409 - 915d83a) starting at [194.254.67.10]:5701
>> mars 17, 2020 4:33:18 PM com.hazelcast.system
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Copyright (c) 2008-2019,
>> Hazelcast, Inc. All Rights Reserved.
>> [INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
>> Copyright (c) 2008-2019, Hazelcast, Inc. All Rights Reserved.
>> mars 17, 2020 4:33:18 PM
>> com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
>> [INFO] [main]
>> com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator -
>> [194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
>> mars 17, 2020 4:33:20 PM
>> com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads and
>> 3 generic threads (1 dedicated for priority tasks)
>> [INFO] [main]
>> com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl -
>> [194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads and 3
>> generic threads (1 dedicated for priority tasks)
>> mars 17, 2020 4:33:20 PM com.hazelcast.internal.diagnostics.Diagnostics
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable
>> add -Dhazelcast.diagnostics.enabled=true to the JVM arguments.
>> [INFO] [main] com.hazelcast.internal.diagnostics.Diagnostics -
>> [194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable add
>> -Dhazelcast.diagnostics.enabled=true to the JVM arguments.
>> mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTING
>> [INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
>> [dev] [3.12] [194.254.67.10]:5701 is STARTING
>> WARNING: An illegal reflective access operation has occurred
>> WARNING: Illegal reflective access by
>> com.hazelcast.internal.networking.nio.SelectorOptimizer (
>> file:/opt/red54010/webapps/openmeetings/WEB-INF/lib/hazelcast-3.12.jar)
>> to field sun.nio.ch.SelectorImpl.selectedKeys
>> WARNING: Please consider reporting this to the maintainers of
>> com.hazelcast.internal.networking.nio.SelectorOptimizer
>> WARNING: Use --illegal-access=warn to enable warnings of further illegal
>> reflective access operations
>> WARNING: All illegal access operations will be denied in a future release
>> mars 17, 2020 4:33:20 PM com.hazelcast.instance.Node
>> AVERTISSEMENT: [194.254.67.10]:5701 [dev] [3.12] No join method is
>> enabled! Starting standalone.
>> [WARN] [main] com.hazelcast.instance.Node - [194.254.67.10]:5701 [dev]
>> [3.12] No join method is enabled! Starting standalone.
>> mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTED
>> [INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
>> [dev] [3.12] [194.254.67.10]:5701 is STARTED
>> [INFO] [main] org.apache.wicket.util.file.WebXmlFile - web.xml: url
>> mapping found for filter with name OpenmeetingsApplication: [/*]
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket extensions initializer
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket jQuery UI initializer (plugins)
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: org.wicketstuff.dashboard.DashboardContextInitializer@98e0718
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket Kendo UI initializer (theme-default)
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket jQuery UI initializer
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: DevUtils DebugBar Initializer
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket Kendo UI initializer
>> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
>> init: Wicket core library initializer
>> [INFO] [main] org.apache.wicket.protocol.http.WebApplication -
>> [OpenmeetingsApplication] Started Wicket version 8.6.1 in DEPLOYMENT mode
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.CalendarWebService
>> from class org.apache.openmeetings.webservice.CalendarWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /CalendarService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.ErrorWebService
>> from class org.apache.openmeetings.webservice.ErrorWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /ErrorService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.GroupWebService
>> from class org.apache.openmeetings.webservice.GroupWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /GroupService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.InfoWebService
>> from class org.apache.openmeetings.webservice.InfoWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /InfoService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.FileWebService
>> from class org.apache.openmeetings.webservice.FileWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /FileService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RecordingWebService
>> from class org.apache.openmeetings.webservice.RecordingWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /RecordService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RoomWebService
>> from class org.apache.openmeetings.webservice.RoomWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /RoomService
>> [INFO] [main]
>> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
>> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.UserWebService
>> from class org.apache.openmeetings.webservice.UserWebService
>> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
>> publish address to be /UserService
>> mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
>> INFOS: Starting ProtocolHandler ["http-nio2-0.0.0.0-80"]
>> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
>> ProtocolHandler ["http-nio2-0.0.0.0-80"]
>> mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
>> INFOS: Starting ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
>> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
>> ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Context initialized:
>> path: /opt/red54010/webapps/root/
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Context initialized:
>> /openmeetings path: /opt/red54010/webapps/openmeetings/
>> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Dedicated RTMPT
>> server configuration was not specified
>> [INFO] [main] org.red5.server.service.ShutdownServer - JEE server was
>> found: TomcatLoader [serviceEngineName=red5Engine]
>> Bootstrap complete
>> Bootstrap exit
>> Token: 262e5440-6ea6-41df-b7b9-6b1df43ee8d1
>> [INFO] [Loader:] org.red5.server.Context - Setting parent bean factory as
>> core
>> [INFO] [Loader:] org.red5.server.scope.WebScope - Set server
>> [Server@2f2f3bcdmap[[empty]]]
>> [INFO] [Loader:] org.red5.server.scope.Scope - Scope null name reset to:
>> disallowed
>> [INFO] [Loader:] org.red5.server.Server - Add mapping global: default
>> host: context: null
>> [INFO] [Loader:] org.red5.server.scope.Scope - Invalid scope name, null
>> is not allowed
>> [WARN] [Loader:] org.red5.server.scope.Scope - Invalid scope rejected:
>> Scope [name=null, path=/default, type=APPLICATION, autoStart=true,
>> creationTime=1584459205142, depth=1, enabled=true, running=false]
>> [WARN] [Loader:] org.red5.server.scope.Scope - Scope not added to parent
>> [INFO] [Loader:] org.red5.server.scope.WebScope - Webscope already
>> registered; remove the 'init-method' from your 'web.scope' bean to prevent
>> this message in the future.
>> [INFO] [Loader:/openmeetings] org.red5.server.Context - Setting parent
>> bean factory as core
>> [INFO] [Loader:/openmeetings]
>> org.springframework.orm.jpa.LocalEntityManagerFactoryBean - Initialized JPA
>> EntityManagerFactory for persistence unit 'openmeetings'
>> mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractConfigLocator
>> INFOS: Loading 'hazelcast.xml' from the classpath.
>> [INFO] [Loader:/openmeetings] com.hazelcast.config.AbstractConfigLocator
>> - Loading 'hazelcast.xml' from the classpath.
>> mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractXmlConfigHelper
>> AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
>> default
>> [WARN] [Loader:/openmeetings]
>> com.hazelcast.config.AbstractXmlConfigHelper - Name of the hazelcast schema
>> location is incorrect, using default
>> mars 17, 2020 4:33:27 PM
>> com.hazelcast.internal.partition.impl.PartitionStateManager
>> INFOS: [194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition
>> table arrangement...
>> [INFO] [Loader:/openmeetings]
>> com.hazelcast.internal.partition.impl.PartitionStateManager -
>> [194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition table
>> arrangement...
>> [INFO] [Loader:/openmeetings] org.red5.server.scope.WebScope - Set server
>> [Server@2f2f3bcdmap['/' -> 'default']]
>> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
>> global: default host: context: openmeetings
>> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
>> global: default host: localhost context: openmeetings
>> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
>> global: default host: 127.0.0.1 context: openmeetings
>> DEBUG 03-17 16:33:28.008 o.a.o.c.r.ScopeApplicationAdapter:343
>> [r:/openmeetings] - start: Scope [name=openmeetings, path=/default,
>> type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
>> enabled=true, running=false]
>> DEBUG 03-17 16:33:28.088 o.a.o.c.r.ScopeApplicationAdapter:127
>> [r:/openmeetings] - webAppPath : /opt/red54010/webapps/openmeetings
>> DEBUG 03-17 16:33:31.011 o.a.o.u.Version:82 [r:/openmeetings] -
>>
>> ################################################################################
>> # Openmeetings is
>> up #
>> # 4.0.10 190d8a1
>> 2019-12-11T14:39:37Z #
>> # and ready to
>> use #
>>
>> ################################################################################
>>
>> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin -
>> Creating WebSocketScopeManager for
>> org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
>> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin -
>> WebSocketPlugin application:
>> org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
>> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope -
>> Application scope: Scope [name=openmeetings, path=/default,
>> type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
>> enabled=true, running=true]
>> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScopeManager -
>> addWebSocketScope: WebSocketScope [path=/openmeetings, listeners=0,
>> connections=0]
>> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope -
>> WebSocket scope added
>> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory - Using
>> default implementation for ThreadExecutor
>> [INFO] [Loader:/openmeetings] org.quartz.core.SchedulerSignalerImpl -
>> Initialized Scheduler Signaller of type: class
>> org.quartz.core.SchedulerSignalerImpl
>> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Quartz
>> Scheduler v.2.3.2 created.
>> [INFO] [Loader:/openmeetings] org.quartz.simpl.RAMJobStore - RAMJobStore
>> initialized.
>> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Scheduler
>> meta-data: Quartz Scheduler (v2.3.2)
>> 'org.springframework.scheduling.quartz.SchedulerFactoryBean#0' with
>> instanceId 'NON_CLUSTERED'
>> Scheduler class: 'org.quartz.core.QuartzScheduler' - running locally.
>> NOT STARTED.
>> Currently in standby mode.
>> Number of jobs executed: 0
>> Using thread pool 'org.quartz.simpl.SimpleThreadPool' - with 10 threads.
>> Using job-store 'org.quartz.simpl.RAMJobStore' - which does not support
>> persistence. and is not clustered.
>>
>> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory -
>> Quartz scheduler
>> 'org.springframework.scheduling.quartz.SchedulerFactoryBean#0' initialized
>> from an externally provided properties instance.
>> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory -
>> Quartz scheduler version: 2.3.2
>> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler -
>> JobFactory set to:
>> org.springframework.scheduling.quartz.AdaptableJobFactory@4edc188f
>> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Scheduler
>> org.springframework.scheduling.quartz.SchedulerFactoryBean#0_$_NON_CLUSTERED
>> started.
>> DEBUG 03-17 16:33:36.925 o.a.o.s.q.s.ReminderJob:94 [Bean#0_Worker-7] -
>> Rss disabled by Admin
>> DEBUG 03-17 16:33:37.007 o.a.o.u.c.CryptProvider:39 [Bean#0_Worker-8] -
>> getInstanceOfCrypt:: configKeyCryptClassName:
>> org.apache.openmeetings.util.crypt.SCryptImplementation
>>
>>
>>
>>
>> Le 17/03/2020 à 01:58, Maxim Solodovnik a écrit :
>>
>> Hello Partick,
>>
>> Actually "correct" documentation is bundled with every OM :)
>> The doc for 4.0.x are available on our demo server:
>> https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
>>
>> RTMPS might be complicated
>> I would start with setting up HTTPS only
>>
>> Additionally it might be simplier for you to set-up front-end Apache as
>> described here:
>>
>> https://stackoverflow.com/questions/51721771/apache-openmeetings-4-0-4-csrf-attack-when-using-apache2-as-proxypass
>>
>> accepted answer contains full config
>> (minor modification of server name is required .....)
>>
>>
>> On Mon, 16 Mar 2020 at 23:52, Patrick Bégou <
>> Patrick.Begou@legi.grenoble-inp.fr> wrote:
>>
>>> Hi Maxim,
>>>
>>> could provide a link to some tutorial to setup openmeeting in https with
>>> RTPMS (if i understand it is the tunneling part) with self signed
>>> certificates ?
>>> I find documentation saying it works "out-of-the-box" (
>>> https://openmeetings.apache.org/HTTPS.html) or some document for 1.9
>>> version and I'm not sure that 4.10 use the same setup....
>>>
>>> jee-config.xml file is quite complex for me, I've tried to comment the
>>> first part ("without ssl") and uncomment the end (removing a comment in the
>>> first section as recursive comments are not allowed, line 35) but I stay in
>>> http (netstat -n shows port 80 listening,)
>>>
>>> Thanks
>>>
>>> Patrick
>>>
>>> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>>>
>>> Hello All,
>>>
>>> It's been looong time I've installed OM on CentOS last time
>>> I hope Alvaro can answer these question :)
>>>
>>> According to ports
>>> 1) for 5.0 you need to modify server.xml
>>> 2) for 4.0 you need to modify jee-config.xml
>>>
>>> According to devices
>>> You need
>>> 1) HTTPS
>>> 2*) Flash browser plugin for 4.0
>>>
>>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <st...@quatrekuehl.eu> wrote:
>>>
>>>> Hey @all,
>>>>
>>>> what kind of vitrualizing software do you use?
>>>>
>>>> As far as I know is it for OM4 necessary that the cam and headset were
>>>> assigned to the vm and not to the host.
>>>>
>>>> Greetz
>>>>
>>>> Hoschie
>>>>
>>>>
>>>>
>>>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>>>
>>>> i have same problem on my ubuntu
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sansão Machiana
>>>>
>>>> *FUNAE - Fundo de Energia*
>>>>
>>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>>
>>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>>
>>>> Tel. +258 21 304717/+258 21 304720
>>>>
>>>> E-mail: sansaomachiana@funae.co.mz
>>>>
>>>> Maputo - Moçambique
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>>> ------------------------------
>>>> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
>>>> *Enviado:* 16 de março de 2020 11:15
>>>> *Para:* Openmeetings user-list
>>>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>>>
>>>> Hi,
>>>>
>>>> I fnaly install openmeetings-4.0.10. The server seams to run fine on
>>>> the CentOS7 VM. I create my first user and try to connect from outside.
>>>> IThere is a firewall and only port 80 is open by the lab. So in
>>>> /opt/red54010/conf/red5.properties i've set http.port=80 and now I can
>>>> login from home in openmeeting.
>>>> But when testing the camera and the microphone I only have "select your
>>>> langage" option ??? see the screen dump attached. My laptop is CentOS7. Is
>>>> there some additional software to deploy for the clients ?
>>>>
>>>> I'm a little bit lost....
>>>>
>>>> Thanks for your help
>>>>
>>>> Patrick
>>>>
>>>>
>>>>
>>>>
>>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>>
>>>> Hi,
>>>>
>>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>>
>>>> I'm stalled at te step opening the browser onhttps://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>>
>>>> I do not know tomcat at all, I've just changed the starting setup with
>>>>
>>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>>
>>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>>
>>>> Any help appreciated and advices to make openmeeting listening on port
>>>> 80 or 443 to finalize the setup.
>>>>
>>>> Patrick
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>>
>>>> A informação contida neste correio electrónico é confidencial e
>>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>>>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>>>> notificado de que qualquer divulgação, distribuição ou reprodução do
>>>> respectivo conteúdo é expressa e estritamente proibida.
>>>>
>>>> The information contained in this e-mail is privileged and confidential
>>>> and is intended only for the use of the individual or entity named above.
>>>> If the reader of this message is not the intended recipient, you are hereby
>>>> notified that any dissemination, distribution or copying of this
>>>> communication is strictly prohibited.
>>>>
>>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>>
>>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>>
>>
>
> --
> WBR
> Maxim aka solomax
>
>
>
--
WBR
Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Maxim Solodovnik <so...@gmail.com>.
Have you enabled Flash plugin in the browser?
On Tue, 17 Mar 2020 at 22:48, Patrick Bégou <
Patrick.Begou@legi.grenoble-inp.fr> wrote:
> Hi Maxim,
>
> I was successfull to set up https for my server with
> https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
> There is a small error in the doc:
> keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks *-keystorepass
> *changeit -trustcacerts -file ca.crt
> should be:
> keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks *-keypass
> *changeit -trustcacerts -file ca.crt
> The -keystorepass option do not exist on my centos7 server for keytool.
>
> Camera and microphone are now detected but... not working. The problem si
> related to the server (tested on Centos7 et Win10 client laptops). When
> requesting check-up the cam and the mic are found, I allow access but they
> are not working. The button to launch the test is greyed and behind the
> text.
>
> Some additional setup to encapsulate rtmp in https ? I'm only allowed for
> http and https access on the openmeetings server. I think I'm not so far to
> the solution.
>
> I provide the startup messages (do not know if it can help) and a screen
> dump. Tonight I will try to deploy again the openmeetings/ubuntu iso in a
> new VM.
>
> Patrick
>
>
> Root: /opt/red54010
> Deploy type: bootstrap
> [INFO] [main] org.red5.server.Launcher - Red5 Server 1.1.0 (
> https://github.com/Red5)
> [INFO] [main] org.red5.spring.Red5ApplicationContext -
> setApplicationContext:
> org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
> started on Tue Mar 17 16:29:54 CET 2020
> [INFO] [main] org.red5.spring.Red5ApplicationContext -
> Red5ApplicationContext init
> [INFO] [main] org.red5.spring.Red5ApplicationContext -
> setApplicationContext:
> org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
> started on Tue Mar 17 16:29:54 CET 2020
> [INFO] [main] org.red5.spring.Red5ApplicationContext -
> Red5ApplicationContext init
> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP will be
> bound to [0.0.0.0:1935]
> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP Mina
> Transport Settings
> Acceptor style: default I/O threads: 8
> TCP no-delay: true keep-alive: false
> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Traffic class
> modification is disabled
> [INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Send buffer
> size: 65536 recv buffer size: 65536 so linger: -1 traffic class: 0
> [INFO] [main] org.red5.server.ContextLoader - ContextLoader init
> [INFO] [main] org.red5.server.ContextLoader - Loading: default.context =
> ${red5.root}/webapps/red5-default.xml =>
> /opt/red54010/webapps/red5-default.xml
> [INFO] [main] org.red5.server.Context - Setting parent bean factory as core
> [INFO] [main] org.red5.net.websocket.WebSocketPlugin - Setting server
> scope listener
> [INFO] [main] org.red5.net.websocket.WebSocketPlugin - Got global scope:
> default
> [INFO] [main] org.red5.server.plugin.PluginLauncher - Loaded plugin:
> org.red5.net.websocket.WebSocketPlugin
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Loading Tomcat
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Server root:
> /opt/red54010
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Config root:
> /opt/red54010/conf
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Application root:
> /opt/red54010/webapps
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Starting Tomcat
> servlet engine
> mars 17, 2020 4:29:58 PM org.apache.catalina.core.AprLifecycleListener
> lifecycleEvent
> INFOS: The APR based Apache Tomcat Native library which allows optimal
> performance in production environments was not found on the
> java.library.path: [/opt/red54010/lib/native]
> [INFO] [main] org.apache.catalina.core.AprLifecycleListener - The APR
> based Apache Tomcat Native library which allows optimal performance in
> production environments was not found on the java.library.path:
> [/opt/red54010/lib/native]
> mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
> INFOS: Initializing ProtocolHandler ["http-nio2-0.0.0.0-80"]
> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
> ProtocolHandler ["http-nio2-0.0.0.0-80"]
> mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
> INFOS: Initializing ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
> ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
> mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardService
> startInternal
> INFOS: Starting service [Tomcat]
> [INFO] [main] org.apache.catalina.core.StandardService - Starting service
> [Tomcat]
> mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardEngine
> startInternal
> INFOS: Starting Servlet engine: [Apache Tomcat/9.0.29]
> [INFO] [main] org.apache.catalina.core.StandardEngine - Starting Servlet
> engine: [Apache Tomcat/9.0.29]
> mars 17, 2020 4:29:59 PM org.apache.catalina.startup.ContextConfig
> getDefaultWebXmlFragment
> INFOS: No global web.xml found
> [INFO] [main] org.apache.catalina.startup.ContextConfig - No global
> web.xml found
> mars 17, 2020 4:29:59 PM org.apache.catalina.core.ApplicationContext log
> INFOS: No Spring WebApplicationInitializer types detected on classpath
> [INFO] [main]
> org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/] - No
> Spring WebApplicationInitializer types detected on classpath
>
> [root@mostvisio conf]#
> [root@mostvisio conf]#
> [root@mostvisio conf]# mars 17, 2020 4:33:15 PM
> org.apache.catalina.util.SessionIdGeneratorBase createSecureRandom
> AVERTISSEMENT: Creation of SecureRandom instance for session ID generation
> using [SHA1PRNG] took [195,531] milliseconds.
> [WARN] [main] org.apache.catalina.util.SessionIdGeneratorBase - Creation
> of SecureRandom instance for session ID generation using [SHA1PRNG] took
> [195,531] milliseconds.
> mars 17, 2020 4:33:17 PM org.apache.catalina.core.ApplicationContext log
> INFOS: No Spring WebApplicationInitializer types detected on classpath
> [INFO] [main]
> org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/openmeetings]
> - No Spring WebApplicationInitializer types detected on classpath
> Context init: openmeetings
> INFO 03-17 16:33:17.573 ROOT:81 [main] - Starting up context: openmeetings
> Filter init: openmeetings
> mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractConfigLocator
> INFOS: Loading 'hazelcast.xml' from the classpath.
> [INFO] [main] com.hazelcast.config.AbstractConfigLocator - Loading
> 'hazelcast.xml' from the classpath.
> mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractXmlConfigHelper
> AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
> default
> [WARN] [main] com.hazelcast.config.AbstractXmlConfigHelper - Name of the
> hazelcast schema location is incorrect, using default
> mars 17, 2020 4:33:18 PM com.hazelcast.instance.HazelcastInstanceFactory
> AVERTISSEMENT: Hazelcast is starting in a Java modular environment (Java 9
> and newer) but without proper access to required Java packages. Use
> additional Java arguments to provide Hazelcast access to Java internal API.
> The internal API access is used to get the best performance results.
> Arguments to be used:
> --add-modules java.se --add-exports
> java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
> java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.nio=ALL-UNNAMED
> --add-opens java.base/sun.nio.ch=ALL-UNNAMED --add-opens
> java.management/sun.management=ALL-UNNAMED --add-opens
> jdk.management/com.sun.management.internal=ALL-UNNAMED
> [WARN] [main] com.hazelcast.instance.HazelcastInstanceFactory - Hazelcast
> is starting in a Java modular environment (Java 9 and newer) but without
> proper access to required Java packages. Use additional Java arguments to
> provide Hazelcast access to Java internal API. The internal API access is
> used to get the best performance results. Arguments to be used:
> --add-modules java.se --add-exports
> java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
> java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.nio=ALL-UNNAMED
> --add-opens java.base/sun.nio.ch=ALL-UNNAMED --add-opens
> java.management/sun.management=ALL-UNNAMED --add-opens
> jdk.management/com.sun.management.internal=ALL-UNNAMED
> mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
> INFOS: [LOCAL] [dev] [3.12] Prefer IPv4 stack is true, prefer IPv6
> addresses is false
> [INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev] [3.12]
> Prefer IPv4 stack is true, prefer IPv6 addresses is false
> mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
> INFOS: [LOCAL] [dev] [3.12] Picked [194.254.67.10]:5701, using socket
> ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
> [INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev] [3.12]
> Picked [194.254.67.10]:5701, using socket
> ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
> mars 17, 2020 4:33:18 PM com.hazelcast.system
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Hazelcast 3.12 (20190409 -
> 915d83a) starting at [194.254.67.10]:5701
> [INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
> Hazelcast 3.12 (20190409 - 915d83a) starting at [194.254.67.10]:5701
> mars 17, 2020 4:33:18 PM com.hazelcast.system
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Copyright (c) 2008-2019,
> Hazelcast, Inc. All Rights Reserved.
> [INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
> Copyright (c) 2008-2019, Hazelcast, Inc. All Rights Reserved.
> mars 17, 2020 4:33:18 PM
> com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
> [INFO] [main]
> com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator -
> [194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
> mars 17, 2020 4:33:20 PM
> com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads and
> 3 generic threads (1 dedicated for priority tasks)
> [INFO] [main]
> com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl -
> [194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads and 3
> generic threads (1 dedicated for priority tasks)
> mars 17, 2020 4:33:20 PM com.hazelcast.internal.diagnostics.Diagnostics
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable
> add -Dhazelcast.diagnostics.enabled=true to the JVM arguments.
> [INFO] [main] com.hazelcast.internal.diagnostics.Diagnostics -
> [194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable add
> -Dhazelcast.diagnostics.enabled=true to the JVM arguments.
> mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
> INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTING
> [INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
> [dev] [3.12] [194.254.67.10]:5701 is STARTING
> WARNING: An illegal reflective access operation has occurred
> WARNING: Illegal reflective access by
> com.hazelcast.internal.networking.nio.SelectorOptimizer (
> file:/opt/red54010/webapps/openmeetings/WEB-INF/lib/hazelcast-3.12.jar)
> to field sun.nio.ch.SelectorImpl.selectedKeys
> WARNING: Please consider reporting this to the maintainers of
> com.hazelcast.internal.networking.nio.SelectorOptimizer
> WARNING: Use --illegal-access=warn to enable warnings of further illegal
> reflective access operations
> WARNING: All illegal access operations will be denied in a future release
> mars 17, 2020 4:33:20 PM com.hazelcast.instance.Node
> AVERTISSEMENT: [194.254.67.10]:5701 [dev] [3.12] No join method is
> enabled! Starting standalone.
> [WARN] [main] com.hazelcast.instance.Node - [194.254.67.10]:5701 [dev]
> [3.12] No join method is enabled! Starting standalone.
> mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
> INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTED
> [INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
> [dev] [3.12] [194.254.67.10]:5701 is STARTED
> [INFO] [main] org.apache.wicket.util.file.WebXmlFile - web.xml: url
> mapping found for filter with name OpenmeetingsApplication: [/*]
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket extensions initializer
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket jQuery UI initializer (plugins)
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: org.wicketstuff.dashboard.DashboardContextInitializer@98e0718
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket Kendo UI initializer (theme-default)
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket jQuery UI initializer
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: DevUtils DebugBar Initializer
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket Kendo UI initializer
> [INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
> init: Wicket core library initializer
> [INFO] [main] org.apache.wicket.protocol.http.WebApplication -
> [OpenmeetingsApplication] Started Wicket version 8.6.1 in DEPLOYMENT mode
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.CalendarWebService
> from class org.apache.openmeetings.webservice.CalendarWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /CalendarService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.ErrorWebService
> from class org.apache.openmeetings.webservice.ErrorWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /ErrorService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.GroupWebService
> from class org.apache.openmeetings.webservice.GroupWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /GroupService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.InfoWebService
> from class org.apache.openmeetings.webservice.InfoWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /InfoService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.FileWebService
> from class org.apache.openmeetings.webservice.FileWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /FileService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RecordingWebService
> from class org.apache.openmeetings.webservice.RecordingWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /RecordService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RoomWebService
> from class org.apache.openmeetings.webservice.RoomWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /RoomService
> [INFO] [main]
> org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean - Creating
> Service {http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.UserWebService
> from class org.apache.openmeetings.webservice.UserWebService
> [INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
> publish address to be /UserService
> mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
> INFOS: Starting ProtocolHandler ["http-nio2-0.0.0.0-80"]
> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
> ProtocolHandler ["http-nio2-0.0.0.0-80"]
> mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
> INFOS: Starting ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
> [INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
> ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Context initialized:
> path: /opt/red54010/webapps/root/
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Context initialized:
> /openmeetings path: /opt/red54010/webapps/openmeetings/
> [INFO] [main] org.red5.server.tomcat.TomcatLoader - Dedicated RTMPT server
> configuration was not specified
> [INFO] [main] org.red5.server.service.ShutdownServer - JEE server was
> found: TomcatLoader [serviceEngineName=red5Engine]
> Bootstrap complete
> Bootstrap exit
> Token: 262e5440-6ea6-41df-b7b9-6b1df43ee8d1
> [INFO] [Loader:] org.red5.server.Context - Setting parent bean factory as
> core
> [INFO] [Loader:] org.red5.server.scope.WebScope - Set server
> [Server@2f2f3bcdmap[[empty]]]
> [INFO] [Loader:] org.red5.server.scope.Scope - Scope null name reset to:
> disallowed
> [INFO] [Loader:] org.red5.server.Server - Add mapping global: default
> host: context: null
> [INFO] [Loader:] org.red5.server.scope.Scope - Invalid scope name, null is
> not allowed
> [WARN] [Loader:] org.red5.server.scope.Scope - Invalid scope rejected:
> Scope [name=null, path=/default, type=APPLICATION, autoStart=true,
> creationTime=1584459205142, depth=1, enabled=true, running=false]
> [WARN] [Loader:] org.red5.server.scope.Scope - Scope not added to parent
> [INFO] [Loader:] org.red5.server.scope.WebScope - Webscope already
> registered; remove the 'init-method' from your 'web.scope' bean to prevent
> this message in the future.
> [INFO] [Loader:/openmeetings] org.red5.server.Context - Setting parent
> bean factory as core
> [INFO] [Loader:/openmeetings]
> org.springframework.orm.jpa.LocalEntityManagerFactoryBean - Initialized JPA
> EntityManagerFactory for persistence unit 'openmeetings'
> mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractConfigLocator
> INFOS: Loading 'hazelcast.xml' from the classpath.
> [INFO] [Loader:/openmeetings] com.hazelcast.config.AbstractConfigLocator -
> Loading 'hazelcast.xml' from the classpath.
> mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractXmlConfigHelper
> AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
> default
> [WARN] [Loader:/openmeetings] com.hazelcast.config.AbstractXmlConfigHelper
> - Name of the hazelcast schema location is incorrect, using default
> mars 17, 2020 4:33:27 PM
> com.hazelcast.internal.partition.impl.PartitionStateManager
> INFOS: [194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition
> table arrangement...
> [INFO] [Loader:/openmeetings]
> com.hazelcast.internal.partition.impl.PartitionStateManager -
> [194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition table
> arrangement...
> [INFO] [Loader:/openmeetings] org.red5.server.scope.WebScope - Set server
> [Server@2f2f3bcdmap['/' -> 'default']]
> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping global:
> default host: context: openmeetings
> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping global:
> default host: localhost context: openmeetings
> [INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping global:
> default host: 127.0.0.1 context: openmeetings
> DEBUG 03-17 16:33:28.008 o.a.o.c.r.ScopeApplicationAdapter:343
> [r:/openmeetings] - start: Scope [name=openmeetings, path=/default,
> type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
> enabled=true, running=false]
> DEBUG 03-17 16:33:28.088 o.a.o.c.r.ScopeApplicationAdapter:127
> [r:/openmeetings] - webAppPath : /opt/red54010/webapps/openmeetings
> DEBUG 03-17 16:33:31.011 o.a.o.u.Version:82 [r:/openmeetings] -
>
> ################################################################################
> # Openmeetings is
> up #
> # 4.0.10 190d8a1
> 2019-12-11T14:39:37Z #
> # and ready to
> use #
>
> ################################################################################
>
> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin - Creating
> WebSocketScopeManager for
> org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin -
> WebSocketPlugin application:
> org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope -
> Application scope: Scope [name=openmeetings, path=/default,
> type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
> enabled=true, running=true]
> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScopeManager -
> addWebSocketScope: WebSocketScope [path=/openmeetings, listeners=0,
> connections=0]
> [INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope - WebSocket
> scope added
> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory - Using
> default implementation for ThreadExecutor
> [INFO] [Loader:/openmeetings] org.quartz.core.SchedulerSignalerImpl -
> Initialized Scheduler Signaller of type: class
> org.quartz.core.SchedulerSignalerImpl
> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Quartz
> Scheduler v.2.3.2 created.
> [INFO] [Loader:/openmeetings] org.quartz.simpl.RAMJobStore - RAMJobStore
> initialized.
> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Scheduler
> meta-data: Quartz Scheduler (v2.3.2)
> 'org.springframework.scheduling.quartz.SchedulerFactoryBean#0' with
> instanceId 'NON_CLUSTERED'
> Scheduler class: 'org.quartz.core.QuartzScheduler' - running locally.
> NOT STARTED.
> Currently in standby mode.
> Number of jobs executed: 0
> Using thread pool 'org.quartz.simpl.SimpleThreadPool' - with 10 threads.
> Using job-store 'org.quartz.simpl.RAMJobStore' - which does not support
> persistence. and is not clustered.
>
> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory - Quartz
> scheduler 'org.springframework.scheduling.quartz.SchedulerFactoryBean#0'
> initialized from an externally provided properties instance.
> [INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory - Quartz
> scheduler version: 2.3.2
> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - JobFactory
> set to: org.springframework.scheduling.quartz.AdaptableJobFactory@4edc188f
> [INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Scheduler
> org.springframework.scheduling.quartz.SchedulerFactoryBean#0_$_NON_CLUSTERED
> started.
> DEBUG 03-17 16:33:36.925 o.a.o.s.q.s.ReminderJob:94 [Bean#0_Worker-7] -
> Rss disabled by Admin
> DEBUG 03-17 16:33:37.007 o.a.o.u.c.CryptProvider:39 [Bean#0_Worker-8] -
> getInstanceOfCrypt:: configKeyCryptClassName:
> org.apache.openmeetings.util.crypt.SCryptImplementation
>
>
>
>
> Le 17/03/2020 à 01:58, Maxim Solodovnik a écrit :
>
> Hello Partick,
>
> Actually "correct" documentation is bundled with every OM :)
> The doc for 4.0.x are available on our demo server:
> https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
>
> RTMPS might be complicated
> I would start with setting up HTTPS only
>
> Additionally it might be simplier for you to set-up front-end Apache as
> described here:
>
> https://stackoverflow.com/questions/51721771/apache-openmeetings-4-0-4-csrf-attack-when-using-apache2-as-proxypass
>
> accepted answer contains full config
> (minor modification of server name is required .....)
>
>
> On Mon, 16 Mar 2020 at 23:52, Patrick Bégou <
> Patrick.Begou@legi.grenoble-inp.fr> wrote:
>
>> Hi Maxim,
>>
>> could provide a link to some tutorial to setup openmeeting in https with
>> RTPMS (if i understand it is the tunneling part) with self signed
>> certificates ?
>> I find documentation saying it works "out-of-the-box" (
>> https://openmeetings.apache.org/HTTPS.html) or some document for 1.9
>> version and I'm not sure that 4.10 use the same setup....
>>
>> jee-config.xml file is quite complex for me, I've tried to comment the
>> first part ("without ssl") and uncomment the end (removing a comment in the
>> first section as recursive comments are not allowed, line 35) but I stay in
>> http (netstat -n shows port 80 listening,)
>>
>> Thanks
>>
>> Patrick
>>
>> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>>
>> Hello All,
>>
>> It's been looong time I've installed OM on CentOS last time
>> I hope Alvaro can answer these question :)
>>
>> According to ports
>> 1) for 5.0 you need to modify server.xml
>> 2) for 4.0 you need to modify jee-config.xml
>>
>> According to devices
>> You need
>> 1) HTTPS
>> 2*) Flash browser plugin for 4.0
>>
>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <st...@quatrekuehl.eu> wrote:
>>
>>> Hey @all,
>>>
>>> what kind of vitrualizing software do you use?
>>>
>>> As far as I know is it for OM4 necessary that the cam and headset were
>>> assigned to the vm and not to the host.
>>>
>>> Greetz
>>>
>>> Hoschie
>>>
>>>
>>>
>>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>>
>>> i have same problem on my ubuntu
>>>
>>>
>>>
>>>
>>>
>>>
>>> Sansão Machiana
>>>
>>> *FUNAE - Fundo de Energia*
>>>
>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>
>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>
>>> Tel. +258 21 304717/+258 21 304720
>>>
>>> E-mail: sansaomachiana@funae.co.mz
>>>
>>> Maputo - Moçambique
>>>
>>>
>>>
>>>
>>>
>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>> ------------------------------
>>> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
>>> *Enviado:* 16 de março de 2020 11:15
>>> *Para:* Openmeetings user-list
>>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>>
>>> Hi,
>>>
>>> I fnaly install openmeetings-4.0.10. The server seams to run fine on the
>>> CentOS7 VM. I create my first user and try to connect from outside. IThere
>>> is a firewall and only port 80 is open by the lab. So in
>>> /opt/red54010/conf/red5.properties i've set http.port=80 and now I can
>>> login from home in openmeeting.
>>> But when testing the camera and the microphone I only have "select your
>>> langage" option ??? see the screen dump attached. My laptop is CentOS7. Is
>>> there some additional software to deploy for the clients ?
>>>
>>> I'm a little bit lost....
>>>
>>> Thanks for your help
>>>
>>> Patrick
>>>
>>>
>>>
>>>
>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>
>>> Hi,
>>>
>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>
>>> I'm stalled at te step opening the browser onhttps://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>
>>> I do not know tomcat at all, I've just changed the starting setup with
>>>
>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>
>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>
>>> Any help appreciated and advices to make openmeeting listening on port
>>> 80 or 443 to finalize the setup.
>>>
>>> Patrick
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------
>>>
>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>
>>> A informação contida neste correio electrónico é confidencial e
>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>>> notificado de que qualquer divulgação, distribuição ou reprodução do
>>> respectivo conteúdo é expressa e estritamente proibida.
>>>
>>> The information contained in this e-mail is privileged and confidential
>>> and is intended only for the use of the individual or entity named above.
>>> If the reader of this message is not the intended recipient, you are hereby
>>> notified that any dissemination, distribution or copying of this
>>> communication is strictly prohibited.
>>>
>>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>>
>>
>
> --
> WBR
> Maxim aka solomax
>
>
>
--
WBR
Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Patrick Bégou <Pa...@legi.grenoble-inp.fr>.
Hi Maxim,
I was successfull to set up https for my server with
https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
There is a small error in the doc:
keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks
*-keystorepass *changeit -trustcacerts -file ca.crt
should be:
keytool -import -alias root -keystore /opt/red54010/conf/keystore.jks
*-keypass *changeit -trustcacerts -file ca.crt
The -keystorepass option do not exist on my centos7 server for keytool.
Camera and microphone are now detected but... not working. The problem
si related to the server (tested on Centos7 et Win10 client laptops).
When requesting check-up the cam and the mic are found, I allow access
but they are not working. The button to launch the test is greyed and
behind the text.
Some additional setup to encapsulate rtmp in https ? I'm only allowed
for http and https access on the openmeetings server. I think I'm not so
far to the solution.
I provide the startup messages (do not know if it can help) and a screen
dump. Tonight I will try to deploy again the openmeetings/ubuntu iso in
a new VM.
Patrick
Root: /opt/red54010
Deploy type: bootstrap
[INFO] [main] org.red5.server.Launcher - Red5 Server 1.1.0
(https://github.com/Red5)
[INFO] [main] org.red5.spring.Red5ApplicationContext -
setApplicationContext:
org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
started on Tue Mar 17 16:29:54 CET 2020
[INFO] [main] org.red5.spring.Red5ApplicationContext -
Red5ApplicationContext init
[INFO] [main] org.red5.spring.Red5ApplicationContext -
setApplicationContext:
org.springframework.context.support.FileSystemXmlApplicationContext@30ee2816,
started on Tue Mar 17 16:29:54 CET 2020
[INFO] [main] org.red5.spring.Red5ApplicationContext -
Red5ApplicationContext init
[INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP will be
bound to [0.0.0.0:1935]
[INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - RTMP Mina
Transport Settings
Acceptor style: default I/O threads: 8
TCP no-delay: true keep-alive: false
[INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Traffic class
modification is disabled
[INFO] [main] org.red5.server.net.rtmp.RTMPMinaTransport - Send buffer
size: 65536 recv buffer size: 65536 so linger: -1 traffic class: 0
[INFO] [main] org.red5.server.ContextLoader - ContextLoader init
[INFO] [main] org.red5.server.ContextLoader - Loading: default.context =
${red5.root}/webapps/red5-default.xml =>
/opt/red54010/webapps/red5-default.xml
[INFO] [main] org.red5.server.Context - Setting parent bean factory as core
[INFO] [main] org.red5.net.websocket.WebSocketPlugin - Setting server
scope listener
[INFO] [main] org.red5.net.websocket.WebSocketPlugin - Got global scope:
default
[INFO] [main] org.red5.server.plugin.PluginLauncher - Loaded plugin:
org.red5.net.websocket.WebSocketPlugin
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Loading Tomcat
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Server root:
/opt/red54010
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Config root:
/opt/red54010/conf
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Application root:
/opt/red54010/webapps
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Starting Tomcat
servlet engine
mars 17, 2020 4:29:58 PM org.apache.catalina.core.AprLifecycleListener
lifecycleEvent
INFOS: The APR based Apache Tomcat Native library which allows optimal
performance in production environments was not found on the
java.library.path: [/opt/red54010/lib/native]
[INFO] [main] org.apache.catalina.core.AprLifecycleListener - The APR
based Apache Tomcat Native library which allows optimal performance in
production environments was not found on the java.library.path:
[/opt/red54010/lib/native]
mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
INFOS: Initializing ProtocolHandler ["http-nio2-0.0.0.0-80"]
[INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
ProtocolHandler ["http-nio2-0.0.0.0-80"]
mars 17, 2020 4:29:58 PM org.apache.coyote.AbstractProtocol init
INFOS: Initializing ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
[INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Initializing
ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardService
startInternal
INFOS: Starting service [Tomcat]
[INFO] [main] org.apache.catalina.core.StandardService - Starting
service [Tomcat]
mars 17, 2020 4:29:59 PM org.apache.catalina.core.StandardEngine
startInternal
INFOS: Starting Servlet engine: [Apache Tomcat/9.0.29]
[INFO] [main] org.apache.catalina.core.StandardEngine - Starting Servlet
engine: [Apache Tomcat/9.0.29]
mars 17, 2020 4:29:59 PM org.apache.catalina.startup.ContextConfig
getDefaultWebXmlFragment
INFOS: No global web.xml found
[INFO] [main] org.apache.catalina.startup.ContextConfig - No global
web.xml found
mars 17, 2020 4:29:59 PM org.apache.catalina.core.ApplicationContext log
INFOS: No Spring WebApplicationInitializer types detected on classpath
[INFO] [main]
org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/] - No
Spring WebApplicationInitializer types detected on classpath
[root@mostvisio conf]#
[root@mostvisio conf]#
[root@mostvisio conf]# mars 17, 2020 4:33:15 PM
org.apache.catalina.util.SessionIdGeneratorBase createSecureRandom
AVERTISSEMENT: Creation of SecureRandom instance for session ID
generation using [SHA1PRNG] took [195,531] milliseconds.
[WARN] [main] org.apache.catalina.util.SessionIdGeneratorBase - Creation
of SecureRandom instance for session ID generation using [SHA1PRNG] took
[195,531] milliseconds.
mars 17, 2020 4:33:17 PM org.apache.catalina.core.ApplicationContext log
INFOS: No Spring WebApplicationInitializer types detected on classpath
[INFO] [main]
org.apache.catalina.core.ContainerBase.[red5Engine].[0.0.0.0].[/openmeetings]
- No Spring WebApplicationInitializer types detected on classpath
Context init: openmeetings
INFO 03-17 16:33:17.573 ROOT:81 [main] - Starting up context: openmeetings
Filter init: openmeetings
mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractConfigLocator
INFOS: Loading 'hazelcast.xml' from the classpath.
[INFO] [main] com.hazelcast.config.AbstractConfigLocator - Loading
'hazelcast.xml' from the classpath.
mars 17, 2020 4:33:17 PM com.hazelcast.config.AbstractXmlConfigHelper
AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
default
[WARN] [main] com.hazelcast.config.AbstractXmlConfigHelper - Name of the
hazelcast schema location is incorrect, using default
mars 17, 2020 4:33:18 PM com.hazelcast.instance.HazelcastInstanceFactory
AVERTISSEMENT: Hazelcast is starting in a Java modular environment (Java
9 and newer) but without proper access to required Java packages. Use
additional Java arguments to provide Hazelcast access to Java internal
API. The internal API access is used to get the best performance
results. Arguments to be used:
--add-modules java.se --add-exports
java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
java.base/java.lang=ALL-UNNAMED --add-opens
java.base/java.nio=ALL-UNNAMED --add-opens
java.base/sun.nio.ch=ALL-UNNAMED --add-opens
java.management/sun.management=ALL-UNNAMED --add-opens
jdk.management/com.sun.management.internal=ALL-UNNAMED
[WARN] [main] com.hazelcast.instance.HazelcastInstanceFactory -
Hazelcast is starting in a Java modular environment (Java 9 and newer)
but without proper access to required Java packages. Use additional Java
arguments to provide Hazelcast access to Java internal API. The internal
API access is used to get the best performance results. Arguments to be
used:
--add-modules java.se --add-exports
java.base/jdk.internal.ref=ALL-UNNAMED --add-opens
java.base/java.lang=ALL-UNNAMED --add-opens
java.base/java.nio=ALL-UNNAMED --add-opens
java.base/sun.nio.ch=ALL-UNNAMED --add-opens
java.management/sun.management=ALL-UNNAMED --add-opens
jdk.management/com.sun.management.internal=ALL-UNNAMED
mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
INFOS: [LOCAL] [dev] [3.12] Prefer IPv4 stack is true, prefer IPv6
addresses is false
[INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev]
[3.12] Prefer IPv4 stack is true, prefer IPv6 addresses is false
mars 17, 2020 4:33:18 PM com.hazelcast.instance.AddressPicker
INFOS: [LOCAL] [dev] [3.12] Picked [194.254.67.10]:5701, using socket
ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
[INFO] [main] com.hazelcast.instance.AddressPicker - [LOCAL] [dev]
[3.12] Picked [194.254.67.10]:5701, using socket
ServerSocket[addr=/0:0:0:0:0:0:0:0,localport=5701], bind any local is true
mars 17, 2020 4:33:18 PM com.hazelcast.system
INFOS: [194.254.67.10]:5701 [dev] [3.12] Hazelcast 3.12 (20190409 -
915d83a) starting at [194.254.67.10]:5701
[INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
Hazelcast 3.12 (20190409 - 915d83a) starting at [194.254.67.10]:5701
mars 17, 2020 4:33:18 PM com.hazelcast.system
INFOS: [194.254.67.10]:5701 [dev] [3.12] Copyright (c) 2008-2019,
Hazelcast, Inc. All Rights Reserved.
[INFO] [main] com.hazelcast.system - [194.254.67.10]:5701 [dev] [3.12]
Copyright (c) 2008-2019, Hazelcast, Inc. All Rights Reserved.
mars 17, 2020 4:33:18 PM
com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator
INFOS: [194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
[INFO] [main]
com.hazelcast.spi.impl.operationservice.impl.BackpressureRegulator -
[194.254.67.10]:5701 [dev] [3.12] Backpressure is disabled
mars 17, 2020 4:33:20 PM
com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl
INFOS: [194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads
and 3 generic threads (1 dedicated for priority tasks)
[INFO] [main]
com.hazelcast.spi.impl.operationexecutor.impl.OperationExecutorImpl -
[194.254.67.10]:5701 [dev] [3.12] Starting 2 partition threads and 3
generic threads (1 dedicated for priority tasks)
mars 17, 2020 4:33:20 PM com.hazelcast.internal.diagnostics.Diagnostics
INFOS: [194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable
add -Dhazelcast.diagnostics.enabled=true to the JVM arguments.
[INFO] [main] com.hazelcast.internal.diagnostics.Diagnostics -
[194.254.67.10]:5701 [dev] [3.12] Diagnostics disabled. To enable add
-Dhazelcast.diagnostics.enabled=true to the JVM arguments.
mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTING
[INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
[dev] [3.12] [194.254.67.10]:5701 is STARTING
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by
com.hazelcast.internal.networking.nio.SelectorOptimizer
(file:/opt/red54010/webapps/openmeetings/WEB-INF/lib/hazelcast-3.12.jar)
to field sun.nio.ch.SelectorImpl.selectedKeys
WARNING: Please consider reporting this to the maintainers of
com.hazelcast.internal.networking.nio.SelectorOptimizer
WARNING: Use --illegal-access=warn to enable warnings of further illegal
reflective access operations
WARNING: All illegal access operations will be denied in a future release
mars 17, 2020 4:33:20 PM com.hazelcast.instance.Node
AVERTISSEMENT: [194.254.67.10]:5701 [dev] [3.12] No join method is
enabled! Starting standalone.
[WARN] [main] com.hazelcast.instance.Node - [194.254.67.10]:5701 [dev]
[3.12] No join method is enabled! Starting standalone.
mars 17, 2020 4:33:20 PM com.hazelcast.core.LifecycleService
INFOS: [194.254.67.10]:5701 [dev] [3.12] [194.254.67.10]:5701 is STARTED
[INFO] [main] com.hazelcast.core.LifecycleService - [194.254.67.10]:5701
[dev] [3.12] [194.254.67.10]:5701 is STARTED
[INFO] [main] org.apache.wicket.util.file.WebXmlFile - web.xml: url
mapping found for filter with name OpenmeetingsApplication: [/*]
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket extensions initializer
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket jQuery UI initializer (plugins)
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: org.wicketstuff.dashboard.DashboardContextInitializer@98e0718
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket Kendo UI initializer (theme-default)
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket jQuery UI initializer
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: DevUtils DebugBar Initializer
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket Kendo UI initializer
[INFO] [main] org.apache.wicket.Application - [OpenmeetingsApplication]
init: Wicket core library initializer
[INFO] [main] org.apache.wicket.protocol.http.WebApplication -
[OpenmeetingsApplication] Started Wicket version 8.6.1 in DEPLOYMENT mode
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.CalendarWebService
from class org.apache.openmeetings.webservice.CalendarWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /CalendarService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.ErrorWebService
from class org.apache.openmeetings.webservice.ErrorWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /ErrorService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.GroupWebService
from class org.apache.openmeetings.webservice.GroupWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /GroupService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.InfoWebService
from class org.apache.openmeetings.webservice.InfoWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /InfoService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.FileWebService
from class org.apache.openmeetings.webservice.FileWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /FileService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RecordingWebService
from class org.apache.openmeetings.webservice.RecordingWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /RecordService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.RoomWebService
from class org.apache.openmeetings.webservice.RoomWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /RoomService
[INFO] [main]
org.apache.cxf.wsdl.service.factory.ReflectionServiceFactoryBean -
Creating Service
{http://webservice.openmeetings.apache.org/}org.apache.openmeetings.webservice.UserWebService
from class org.apache.openmeetings.webservice.UserWebService
[INFO] [main] org.apache.cxf.endpoint.ServerImpl - Setting the server's
publish address to be /UserService
mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
INFOS: Starting ProtocolHandler ["http-nio2-0.0.0.0-80"]
[INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
ProtocolHandler ["http-nio2-0.0.0.0-80"]
mars 17, 2020 4:33:24 PM org.apache.coyote.AbstractProtocol start
INFOS: Starting ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
[INFO] [main] org.apache.coyote.http11.Http11Nio2Protocol - Starting
ProtocolHandler ["https-jsse-nio2-0.0.0.0-443"]
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Context
initialized: path: /opt/red54010/webapps/root/
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Context initialized:
/openmeetings path: /opt/red54010/webapps/openmeetings/
[INFO] [main] org.red5.server.tomcat.TomcatLoader - Dedicated RTMPT
server configuration was not specified
[INFO] [main] org.red5.server.service.ShutdownServer - JEE server was
found: TomcatLoader [serviceEngineName=red5Engine]
Bootstrap complete
Bootstrap exit
Token: 262e5440-6ea6-41df-b7b9-6b1df43ee8d1
[INFO] [Loader:] org.red5.server.Context - Setting parent bean factory
as core
[INFO] [Loader:] org.red5.server.scope.WebScope - Set server
[Server@2f2f3bcdmap[[empty]]]
[INFO] [Loader:] org.red5.server.scope.Scope - Scope null name reset
to: disallowed
[INFO] [Loader:] org.red5.server.Server - Add mapping global: default
host: context: null
[INFO] [Loader:] org.red5.server.scope.Scope - Invalid scope name, null
is not allowed
[WARN] [Loader:] org.red5.server.scope.Scope - Invalid scope rejected:
Scope [name=null, path=/default, type=APPLICATION, autoStart=true,
creationTime=1584459205142, depth=1, enabled=true, running=false]
[WARN] [Loader:] org.red5.server.scope.Scope - Scope not added to parent
[INFO] [Loader:] org.red5.server.scope.WebScope - Webscope already
registered; remove the 'init-method' from your 'web.scope' bean to
prevent this message in the future.
[INFO] [Loader:/openmeetings] org.red5.server.Context - Setting parent
bean factory as core
[INFO] [Loader:/openmeetings]
org.springframework.orm.jpa.LocalEntityManagerFactoryBean - Initialized
JPA EntityManagerFactory for persistence unit 'openmeetings'
mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractConfigLocator
INFOS: Loading 'hazelcast.xml' from the classpath.
[INFO] [Loader:/openmeetings] com.hazelcast.config.AbstractConfigLocator
- Loading 'hazelcast.xml' from the classpath.
mars 17, 2020 4:33:27 PM com.hazelcast.config.AbstractXmlConfigHelper
AVERTISSEMENT: Name of the hazelcast schema location is incorrect, using
default
[WARN] [Loader:/openmeetings]
com.hazelcast.config.AbstractXmlConfigHelper - Name of the hazelcast
schema location is incorrect, using default
mars 17, 2020 4:33:27 PM
com.hazelcast.internal.partition.impl.PartitionStateManager
INFOS: [194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition
table arrangement...
[INFO] [Loader:/openmeetings]
com.hazelcast.internal.partition.impl.PartitionStateManager -
[194.254.67.10]:5701 [dev] [3.12] Initializing cluster partition table
arrangement...
[INFO] [Loader:/openmeetings] org.red5.server.scope.WebScope - Set
server [Server@2f2f3bcdmap['/' -> 'default']]
[INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
global: default host: context: openmeetings
[INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
global: default host: localhost context: openmeetings
[INFO] [Loader:/openmeetings] org.red5.server.Server - Add mapping
global: default host: 127.0.0.1 context: openmeetings
DEBUG 03-17 16:33:28.008 o.a.o.c.r.ScopeApplicationAdapter:343
[r:/openmeetings] - start: Scope [name=openmeetings, path=/default,
type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
enabled=true, running=false]
DEBUG 03-17 16:33:28.088 o.a.o.c.r.ScopeApplicationAdapter:127
[r:/openmeetings] - webAppPath : /opt/red54010/webapps/openmeetings
DEBUG 03-17 16:33:31.011 o.a.o.u.Version:82 [r:/openmeetings] -
################################################################################
# Openmeetings is
up #
# 4.0.10 190d8a1
2019-12-11T14:39:37Z #
# and ready to
use #
################################################################################
[INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin -
Creating WebSocketScopeManager for
org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
[INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketPlugin -
WebSocketPlugin application:
org.apache.openmeetings.core.remote.ScopeApplicationAdapter@6717dd89
[INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope -
Application scope: Scope [name=openmeetings, path=/default,
type=APPLICATION, autoStart=true, creationTime=1584459206537, depth=1,
enabled=true, running=true]
[INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScopeManager -
addWebSocketScope: WebSocketScope [path=/openmeetings, listeners=0,
connections=0]
[INFO] [pool-1-thread-1] org.red5.net.websocket.WebSocketScope -
WebSocket scope added
[INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory -
Using default implementation for ThreadExecutor
[INFO] [Loader:/openmeetings] org.quartz.core.SchedulerSignalerImpl -
Initialized Scheduler Signaller of type: class
org.quartz.core.SchedulerSignalerImpl
[INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler - Quartz
Scheduler v.2.3.2 created.
[INFO] [Loader:/openmeetings] org.quartz.simpl.RAMJobStore - RAMJobStore
initialized.
[INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler -
Scheduler meta-data: Quartz Scheduler (v2.3.2)
'org.springframework.scheduling.quartz.SchedulerFactoryBean#0' with
instanceId 'NON_CLUSTERED'
Scheduler class: 'org.quartz.core.QuartzScheduler' - running locally.
NOT STARTED.
Currently in standby mode.
Number of jobs executed: 0
Using thread pool 'org.quartz.simpl.SimpleThreadPool' - with 10 threads.
Using job-store 'org.quartz.simpl.RAMJobStore' - which does not
support persistence. and is not clustered.
[INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory -
Quartz scheduler
'org.springframework.scheduling.quartz.SchedulerFactoryBean#0'
initialized from an externally provided properties instance.
[INFO] [Loader:/openmeetings] org.quartz.impl.StdSchedulerFactory -
Quartz scheduler version: 2.3.2
[INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler -
JobFactory set to:
org.springframework.scheduling.quartz.AdaptableJobFactory@4edc188f
[INFO] [Loader:/openmeetings] org.quartz.core.QuartzScheduler -
Scheduler
org.springframework.scheduling.quartz.SchedulerFactoryBean#0_$_NON_CLUSTERED
started.
DEBUG 03-17 16:33:36.925 o.a.o.s.q.s.ReminderJob:94 [Bean#0_Worker-7] -
Rss disabled by Admin
DEBUG 03-17 16:33:37.007 o.a.o.u.c.CryptProvider:39 [Bean#0_Worker-8] -
getInstanceOfCrypt:: configKeyCryptClassName:
org.apache.openmeetings.util.crypt.SCryptImplementation
Le 17/03/2020 à 01:58, Maxim Solodovnik a écrit :
> Hello Partick,
>
> Actually "correct" documentation is bundled with every OM :)
> The doc for 4.0.x are available on our demo
> server: https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
>
> RTMPS might be complicated
> I would start with setting up HTTPS only
>
> Additionally it might be simplier for you to set-up front-end Apache
> as described here:
> https://stackoverflow.com/questions/51721771/apache-openmeetings-4-0-4-csrf-attack-when-using-apache2-as-proxypass
>
> accepted answer contains full config
> (minor modification of server name is required .....)
>
>
> On Mon, 16 Mar 2020 at 23:52, Patrick Bégou
> <Patrick.Begou@legi.grenoble-inp.fr
> <ma...@legi.grenoble-inp.fr>> wrote:
>
> Hi Maxim,
>
> could provide a link to some tutorial to setup openmeeting in
> https with RTPMS (if i understand it is the tunneling part) with
> self signed certificates ?
> I find documentation saying it works "out-of-the-box"
> (https://openmeetings.apache.org/HTTPS.html) or some document for
> 1.9 version and I'm not sure that 4.10 use the same setup....
>
> jee-config.xml file is quite complex for me, I've tried to comment
> the first part ("without ssl") and uncomment the end (removing a
> comment in the first section as recursive comments are not
> allowed, line 35) but I stay in http (netstat -n shows port 80
> listening,)
>
> Thanks
>
> Patrick
>
> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>> Hello All,
>>
>> It's been looong time I've installed OM on CentOS last time
>> I hope Alvaro can answer these question :)
>>
>> According to ports
>> 1) for 5.0 you need to modify server.xml
>> 2) for 4.0 you need to modify jee-config.xml
>>
>> According to devices
>> You need
>> 1) HTTPS
>> 2*) Flash browser plugin for 4.0
>>
>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl.eu
>> <ma...@quatrekuehl.eu>> wrote:
>>
>> Hey @all,
>>
>> what kind of vitrualizing software do you use?
>>
>> As far as I know is it for OM4 necessary that the cam and
>> headset were assigned to the vm and not to the host.
>>
>> Greetz
>>
>> Hoschie
>>
>>
>>
>>
>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>
>>> i have same problem on my ubuntu
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Sansão Machiana
>>>
>>> *FUNAE - Fundo de Energia*
>>>
>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>
>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>
>>> Tel. +258 21 304717/+258 21 304720
>>>
>>> E-mail: sansaomachiana@funae.co.mz
>>> <ma...@funae.co.mz>
>>>
>>> Maputo - Moçambique
>>>
>>>
>>>
>>>
>>>
>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>>
>>> ------------------------------------------------------------------------
>>> *De:* Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
>>> <ma...@legi.grenoble-inp.fr>>
>>> *Enviado:* 16 de março de 2020 11:15
>>> *Para:* Openmeetings user-list
>>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>>
>>> Hi,
>>>
>>> I fnaly install openmeetings-4.0.10. The server seams to run
>>> fine on the CentOS7 VM. I create my first user and try to
>>> connect from outside. IThere is a firewall and only port 80
>>> is open by the lab. So in /opt/red54010/conf/red5.properties
>>> i've set http.port=80 and now I can login from home in
>>> openmeeting.
>>> But when testing the camera and the microphone I only have
>>> "select your langage" option ??? see the screen dump
>>> attached. My laptop is CentOS7. Is there some additional
>>> software to deploy for the clients ?
>>>
>>> I'm a little bit lost....
>>>
>>> Thanks for your help
>>>
>>> Patrick
>>>
>>>
>>>
>>>
>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>> Hi,
>>>>
>>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>>
>>>> I'm stalled at te step opening the browser on
>>>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>>
>>>> I do not know tomcat at all, I've just changed the starting setup with
>>>>
>>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>>
>>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>>
>>>> Any help appreciated and advices to make openmeeting listening on port
>>>> 80 or 443 to finalize the setup.
>>>>
>>>> Patrick
>>>>
>>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>
>>> A informação contida neste correio electrónico é
>>> confidencial e privilegiada, destinando-se unicamente à
>>> pessoa ou entidade acima indicada. Se o leitor desta
>>> mensagem não for o seu destinatário, fica pela presente
>>> notificado de que qualquer divulgação, distribuição ou
>>> reprodução do respectivo conteúdo é expressa e estritamente
>>> proibida.
>>>
>>> The information contained in this e-mail is privileged and
>>> confidential and is intended only for the use of the
>>> individual or entity named above. If the reader of this
>>> message is not the intended recipient, you are hereby
>>> notified that any dissemination, distribution or copying of
>>> this communication is strictly prohibited.
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>
>
>
>
> --
> WBR
> Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello Partick,
Actually "correct" documentation is bundled with every OM :)
The doc for 4.0.x are available on our demo server:
https://om.alteametasoft.com/openmeetings/docs/RTMPSAndHTTPS.html
RTMPS might be complicated
I would start with setting up HTTPS only
Additionally it might be simplier for you to set-up front-end Apache as
described here:
https://stackoverflow.com/questions/51721771/apache-openmeetings-4-0-4-csrf-attack-when-using-apache2-as-proxypass
accepted answer contains full config
(minor modification of server name is required .....)
On Mon, 16 Mar 2020 at 23:52, Patrick Bégou <
Patrick.Begou@legi.grenoble-inp.fr> wrote:
> Hi Maxim,
>
> could provide a link to some tutorial to setup openmeeting in https with
> RTPMS (if i understand it is the tunneling part) with self signed
> certificates ?
> I find documentation saying it works "out-of-the-box" (
> https://openmeetings.apache.org/HTTPS.html) or some document for 1.9
> version and I'm not sure that 4.10 use the same setup....
>
> jee-config.xml file is quite complex for me, I've tried to comment the
> first part ("without ssl") and uncomment the end (removing a comment in the
> first section as recursive comments are not allowed, line 35) but I stay in
> http (netstat -n shows port 80 listening,)
>
> Thanks
>
> Patrick
>
> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>
> Hello All,
>
> It's been looong time I've installed OM on CentOS last time
> I hope Alvaro can answer these question :)
>
> According to ports
> 1) for 5.0 you need to modify server.xml
> 2) for 4.0 you need to modify jee-config.xml
>
> According to devices
> You need
> 1) HTTPS
> 2*) Flash browser plugin for 4.0
>
> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <st...@quatrekuehl.eu> wrote:
>
>> Hey @all,
>>
>> what kind of vitrualizing software do you use?
>>
>> As far as I know is it for OM4 necessary that the cam and headset were
>> assigned to the vm and not to the host.
>>
>> Greetz
>>
>> Hoschie
>>
>>
>>
>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>
>> i have same problem on my ubuntu
>>
>>
>>
>>
>>
>>
>> Sansão Machiana
>>
>> *FUNAE - Fundo de Energia*
>>
>> *Unidade de Tecnologias de Informação e Comunicação*
>>
>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>
>> Tel. +258 21 304717/+258 21 304720
>>
>> E-mail: sansaomachiana@funae.co.mz
>>
>> Maputo - Moçambique
>>
>>
>>
>>
>>
>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>> ------------------------------
>> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
>> *Enviado:* 16 de março de 2020 11:15
>> *Para:* Openmeetings user-list
>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>
>> Hi,
>>
>> I fnaly install openmeetings-4.0.10. The server seams to run fine on the
>> CentOS7 VM. I create my first user and try to connect from outside. IThere
>> is a firewall and only port 80 is open by the lab. So in
>> /opt/red54010/conf/red5.properties i've set http.port=80 and now I can
>> login from home in openmeeting.
>> But when testing the camera and the microphone I only have "select your
>> langage" option ??? see the screen dump attached. My laptop is CentOS7. Is
>> there some additional software to deploy for the clients ?
>>
>> I'm a little bit lost....
>>
>> Thanks for your help
>>
>> Patrick
>>
>>
>>
>>
>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>
>> Hi,
>>
>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>
>> I'm stalled at te step opening the browser onhttps://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>
>> I do not know tomcat at all, I've just changed the starting setup with
>>
>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>
>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>
>> Any help appreciated and advices to make openmeeting listening on port
>> 80 or 443 to finalize the setup.
>>
>> Patrick
>>
>>
>>
>>
>>
>> ------------------------------
>>
>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>
>> A informação contida neste correio electrónico é confidencial e
>> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
>> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
>> notificado de que qualquer divulgação, distribuição ou reprodução do
>> respectivo conteúdo é expressa e estritamente proibida.
>>
>> The information contained in this e-mail is privileged and confidential
>> and is intended only for the use of the individual or entity named above.
>> If the reader of this message is not the intended recipient, you are hereby
>> notified that any dissemination, distribution or copying of this
>> communication is strictly prohibited.
>>
>>
>
> --
> WBR
> Maxim aka solomax
>
>
>
--
WBR
Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
...yes you are right when say to install the grub in /dev/sda...
..............
El lun, 16-03-2020 a las 18:34 +0100, Patrick Bégou escribió:
> Hi Alvaro,
>
>
>
> it was my first attempt many days ago
> but with proxmox I wasn't able to boot after installation. I
> think
> today that the problem could be related to grub on /dev/sda1
> instead of /dev/sda.... But in the documentation, searching
> some
> help, I found it was not intended for production. So I switch
> to
> OM4
>
>
> May be I could try to create a new VM
> and start again with OM5 and grub on /dev/sda.
>
>
> It is just a little bit difficult as I
> have to work from home (because of the coronavirus alert) and
> it
> is less easy (very little network bandwith). My goal is to have
> openmeetings to work with the research team while we are not
> allowed to move from home in France (4 to 6 weeks).
>
>
>
> Patrick
>
>
>
>
>
> Le 16/03/2020 à 18:21, Alvaro a écrit :
>
>
>
> >
> > I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
> > VirtualBox, and works right, login, browsing OpenMeetings
> > and recording video at "Conference room" and "Interview room"
> > with cam and mic.
> > So try another configuration or so...
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ......................................
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
> >
> > > Hi Maxim,
> > >
> > >
> > >
> > > could provide a link to some
> > > tutorial to setup openmeeting in https with RTPMS (if i
> > > understand it is the tunneling part) with self signed
> > > certificates ?
> > > I find documentation saying it
> > > works "out-of-the-box" (https://openmeetings.apache.org
> > > /HTTPS.html)
> > > or some document for 1.9 version and I'm not sure that
> > > 4.10
> > > use the same setup....
> > >
> > >
> > >
> > > jee-config.xml file is quite
> > > complex for me, I've tried to comment the first part
> > > ("without
> > > ssl") and uncomment the end (removing a comment in the
> > > first
> > > section as recursive comments are not allowed, line 35)
> > > but I
> > > stay in http (netstat -n shows port 80 listening,)
> > >
> > >
> > >
> > >
> > >
> > > Thanks
> > >
> > >
> > >
> > > Patrick
> > >
> > >
> > >
> > >
> > >
> > > Le 16/03/2020 à 12:48, Maxim
> > > Solodovnik a écrit :
> > >
> > >
> > >
> > > >
> > > > Hello All,
> > > >
> > > >
> > > >
> > > > It's been looong time I've installed OM on CentOS
> > > > last
> > > > time
> > > > I hope Alvaro can answer these question :)
> > > >
> > > >
> > > >
> > > > According to ports
> > > > 1) for 5.0 you need to modify server.xml
> > > > 2) for 4.0 you need to modify jee-config.xml
> > > >
> > > >
> > > >
> > > > According to devices
> > > > You need
> > > > 1) HTTPS
> > > > 2*) Flash browser plugin for 4.0
> > > >
> > > >
> > > >
> > > >
> > > > On Mon, 16 Mar 2020 at
> > > > 16:35, Stefan Kühl <st...@quatrekuehl.eu>
> > > > wrote:
> > > >
> > > >
> > > >
> > > > >
> > > > > Hey @all,
> > > > > what kind of vitrualizing software do you
> > > > > use?
> > > > > As far as I know is it for OM4 necessary that
> > > > > the cam
> > > > > and headset were assigned to the vm and not
> > > > > to the
> > > > > host.
> > > > > Greetz
> > > > > Hoschie
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > > > >
> > > > > >
> > > > > > i have same problem on my ubuntu
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Sansão
> > > > > > Machiana
> > > > > >
> > > > > >
> > > > > > FUNAE
> > > > > > - Fundo de Energia
> > > > > > Unidade
> > > > > > de Tecnologias de
> > > > > > Informação e
> > > > > > Comunicação
> > > > > > R.
> > > > > > da Imprensa, nº 256 - 6º
> > > > > > andar, porta
> > > > > > 607 - 610
> > > > > > Tel.
> > > > > > +258 21 304717/+258 21
> > > > > > 304720
> > > > > > E-mail:
> > > > > > sansaomachiana@funae.co.mz
> > > > > > Maputo
> > > > > > - Moçambique
> > > > > >
> > > > > >
> > > > > >
> > > > > > Por
> > > > > > favor pense no Meio
> > > > > > Ambiente, antes de
> > > > > > imprimir este e-mail
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > De:
> > > > > > Patrick Bégou <Patrick.Begou@legi
> > > > > > .grenoble-inp.fr>
> > > > > >
> > > > > > Enviado: 16 de março de 2020
> > > > > > 11:15
> > > > > >
> > > > > > Para: Openmeetings user-list
> > > > > >
> > > > > > Assunto: Re: Deploying
> > > > > > Openmeeting 5 on Centos7
> > > > > >
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I fnaly install openmeetings-
> > > > > > 4.0.10. The
> > > > > > server seams to run fine on the
> > > > > > CentOS7 VM. I
> > > > > > create my first user and try to
> > > > > > connect from
> > > > > > outside. IThere is a firewall and
> > > > > > only port 80
> > > > > > is open by the lab. So in
> > > > > > /opt/red54010/conf/red5.propertie
> > > > > > s i've set
> > > > > > http.port=80 and now I can login
> > > > > > from home in
> > > > > > openmeeting.
> > > > > > But when testing the camera and the
> > > > > > microphone I only have "select
> > > > > > your langage"
> > > > > > option ??? see the screen dump
> > > > > > attached. My
> > > > > > laptop is CentOS7. Is there some
> > > > > > additional
> > > > > > software to deploy for the
> > > > > > clients ?
> > > > > >
> > > > > > I'm a little bit lost....
> > > > > >
> > > > > > Thanks for your help
> > > > > >
> > > > > > Patrick
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Le 15/03/2020 à 12:02, Patrick
> > > > > > Bégou a
> > > > > > écrit :
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE.
> > > > > > > I follow the
> > > > > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf"
> > > > > > > document.
> > > > > > >
> > > > > > > I'm stalled at te step opening the browser on
> > > > > > > https://localhost:5443/openmeetings/ as the answer is
> > > > > > > "HTTP404 not found"
> > > > > > >
> > > > > > > I do not know tomcat at all, I've just changed the
> > > > > > > starting setup with
> > > > > > >
> > > > > > > export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
> > > > > > >
> > > > > > > to make tomcat listening on IPV4 adresses and "netstat
> > > > > > > -a" show it is ok.
> > > > > > >
> > > > > > > Any help appreciated and advices to make openmeeting
> > > > > > > listening on port
> > > > > > > 80 or 443 to finalize the setup.
> > > > > > >
> > > > > > > Patrick
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > FUNAE, Fundo De Energia - Disclaimer
> > > > > > and
> > > > > > Confidentiality Note
> > > > > >
> > > > > >
> > > > > >
> > > > > > A informação contida neste correio
> > > > > > electrónico é
> > > > > > confidencial e privilegiada,
> > > > > > destinando-se
> > > > > > unicamente à pessoa ou entidade acima
> > > > > > indicada. Se o
> > > > > > leitor desta mensagem não for o seu
> > > > > > destinatário,
> > > > > > fica pela presente notificado de que
> > > > > > qualquer
> > > > > > divulgação, distribuição ou reprodução
> > > > > > do respectivo
> > > > > > conteúdo é expressa e estritamente
> > > > > > proibida.
> > > > > >
> > > > > >
> > > > > >
> > > > > > The information contained in this e-
> > > > > > mail is
> > > > > > privileged and confidential and is
> > > > > > intended only for
> > > > > > the use of the individual or entity
> > > > > > named above. If
> > > > > > the reader of this message is not the
> > > > > > intended
> > > > > > recipient, you are hereby notified that
> > > > > > any
> > > > > > dissemination, distribution or copying
> > > > > > of this
> > > > > > communication is strictly prohibited.
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > > > WBR
> > > >
> > > > Maxim aka solomax
> > > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
>
>
>
>
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Here is the new link for the ova file called:
OpenMeetings 5.0.0-M3 on Ubuntu 18.04 VirtualBox.ova
https://drive.google.com/file/d/1NGXLYvO2J_4hBpnT1KIt94qYkgjFEWXr/view?
usp=sharing
Tomorrow will announce the link in the installation tutorials wiki
page:
..............................
El lun, 16-03-2020 a las 19:54 +0100, Alvaro escribió:
> Ok, now is deleted. Tomorrow i'll upload the right ova file,with some
> modifications in the desktop files about user systemname and so.
>
> ....................
>
>
> El lun, 16-03-2020 a las 18:40 +0000, Daniel Baker escribió:
> > Yes I got it , thanks.
> >
> >
> > On 16/03/2020 18:21, Alvaro wrote:
> >
> >
> >
> > >
> > > Daniel, do you downloaded the ova file?
> > > I want delete it in 30 minutes.
> > >
> > >
> > >
> > >
> > >
> > >
> > > .......................
> > >
> > >
> > >
> > >
> > >
> > >
> > > El lun, 16-03-2020 a las 18:53 +0100, Alvaro escribió:
> > >
> > > > Ok, here is the link to download "OM_5.0.0-M3.ova"
> > > > (VirtualBox):
> > > >
> > > >
> > > >
> > > > https://drive.google.com/file/d/1T5-nAmlmM_1Rvttl1jgaig
> > > > RR2xZf4GSM/view?usp=sharing
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ...............................................
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > El lun, 16-03-2020 a las 18:43 +0100, Alvaro escribió:
> > > >
> > > > > Yes Daniel. Let me upload it and will come back
> > > > > with the
> > > > > url file to download.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ....................
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker
> > > > > escribió:
> > > > >
> > > > > > Alvaro can you provide us with a
> > > > > > virtualbox OVA
> > > > > > file ?
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 16/03/2020 17:34, Patrick Bégou wrote:
> > > > > >
> > > > > > > Hi Alvaro,
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > it was my first attempt many days ago but
> > > > > > > with
> > > > > > > proxmox I wasn't
> > > > > > > able to boot after installation. I think
> > > > > > > today that
> > > > > > > the problem
> > > > > > > could be related to grub on /dev/sda1
> > > > > > > instead of
> > > > > > > /dev/sda.... But
> > > > > > > in the documentation, searching some help,
> > > > > > > I found it
> > > > > > > was not
> > > > > > > intended for production. So I switch to OM4
> > > > > > > May be I could try to create a new VM and
> > > > > > > start again
> > > > > > > with OM5 and
> > > > > > > grub on /dev/sda.
> > > > > > > It is just a little bit difficult as I have
> > > > > > > to work
> > > > > > > from home
> > > > > > > (because of the coronavirus alert) and it
> > > > > > > is less
> > > > > > > easy (very little
> > > > > > > network bandwith). My goal is to have
> > > > > > > openmeetings to
> > > > > > > work with the
> > > > > > > research team while we are not allowed to
> > > > > > > move from
> > > > > > > home in France
> > > > > > > (4 to 6 weeks).
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Patrick
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Le 16/03/2020 à 18:21, Alvaro a écrit :
> > > > > > >
> > > > > > > > I have installed the live iso OM 5.0.0-
> > > > > > > > M3 Ubuntu
> > > > > > > > 18.04 in
> > > > > > > > VirtualBox, and works right, login,
> > > > > > > > browsing
> > > > > > > > OpenMeetings
> > > > > > > > and recording video at "Conference
> > > > > > > > room" and
> > > > > > > > "Interview room"
> > > > > > > > with cam and mic.
> > > > > > > > So try another configuration or so...
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > ......................................
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > El lun, 16-03-2020 a las 17:52 +0100,
> > > > > > > > Patrick Bégou
> > > > > > > > escribió:
> > > > > > > >
> > > > > > > > > Hi Maxim,
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > could provide a link to some
> > > > > > > > > tutorial to setup
> > > > > > > > > openmeeting in
> > > > > > > > > https with RTPMS (if i understand
> > > > > > > > > it is the
> > > > > > > > > tunneling part)
> > > > > > > > > with self signed certificates ?
> > > > > > > > > I find documentation saying it
> > > > > > > > > works
> > > > > > > > > "out-of-the-box" (https://
> > > > > > > > > openmeetings.apache.org/HTTPS.html)
> > > > > > > > > or some
> > > > > > > > > document for 1.9
> > > > > > > > > version and I'm not sure that 4.10
> > > > > > > > > use the same
> > > > > > > > > setup....
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > jee-config.xml file is quite
> > > > > > > > > complex for me, I've
> > > > > > > > > tried to
> > > > > > > > > comment the first part ("without
> > > > > > > > > ssl") and
> > > > > > > > > uncomment the end
> > > > > > > > > (removing a comment in the first
> > > > > > > > > section as
> > > > > > > > > recursive comments
> > > > > > > > > are not allowed, line 35) but I
> > > > > > > > > stay in http
> > > > > > > > > (netstat -n shows
> > > > > > > > > port 80 listening,)
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Thanks
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Patrick
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Le 16/03/2020 à 12:48, Maxim
> > > > > > > > > Solodovnik a écrit :
> > > > > > > > >
> > > > > > > > > > Hello All,
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > It's been looong time I've
> > > > > > > > > > installed OM on
> > > > > > > > > > CentOS last time
> > > > > > > > > > I hope Alvaro can answer these
> > > > > > > > > > question :)
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > According to ports
> > > > > > > > > > 1) for 5.0 you need to modify
> > > > > > > > > > server.xml
> > > > > > > > > > 2) for 4.0 you need to modify
> > > > > > > > > > jee-config.xml
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > According to devices
> > > > > > > > > > You need
> > > > > > > > > > 1) HTTPS
> > > > > > > > > > 2*) Flash browser plugin for
> > > > > > > > > > 4.0
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Mon, 16 Mar 2020 at 16:35,
> > > > > > > > > > Stefan Kühl
> > > > > > > > > > <stefan@quatrekuehl
> > > > > > > > > > .eu> wrote:
> > > > > > > > > >
> > > > > > > > > > > Hey @all,
> > > > > > > > > > > what kind of vitrualizing
> > > > > > > > > > > software do you
> > > > > > > > > > > use?
> > > > > > > > > > > As far as I know is it for
> > > > > > > > > > > OM4 necessary that
> > > > > > > > > > > the cam and
> > > > > > > > > > > headset were assigned to
> > > > > > > > > > > the vm and not to
> > > > > > > > > > > the host.
> > > > > > > > > > > Greetz
> > > > > > > > > > > Hoschie
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Am 16.03.2020 10:46,
> > > > > > > > > > > schrieb Sansao Machiana:
> > > > > > > > > > >
> > > > > > > > > > > > i have same problem on
> > > > > > > > > > > > my ubuntu
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Sansão Machiana
> > > > > > > > > > > > FUNAE - Fundo de
> > > > > > > > > > > > Energia
> > > > > > > > > > > > Unidade de Tecnologias
> > > > > > > > > > > > de Informação e
> > > > > > > > > > > > Comunicação
> > > > > > > > > > > > R. da Imprensa, nº 256
> > > > > > > > > > > > - 6º andar, porta
> > > > > > > > > > > > 607 - 610
> > > > > > > > > > > > Tel. +258 21
> > > > > > > > > > > > 304717/+258 21 304720
> > > > > > > > > > > > E-mail: sansaomachiana
> > > > > > > > > > > > @funae.co.mz
> > > > > > > > > > > > Maputo - Moçambique
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Por favor pense no Meio
> > > > > > > > > > > > Ambiente, antes de
> > > > > > > > > > > > imprimir este
> > > > > > > > > > > > e-mail
> > > > > > > > > > > > De: Patrick Bégou <Patr
> > > > > > > > > > > > ick.Begou@legi.grenoble-inp.fr>
> > > > > > > > > > > > Enviado: 16 de março de
> > > > > > > > > > > > 2020 11:15
> > > > > > > > > > > > Para: Openmeetings
> > > > > > > > > > > > user-list
> > > > > > > > > > > > Assunto: Re: Deploying
> > > > > > > > > > > > Openmeeting 5 on
> > > > > > > > > > > > Centos7
> > > > > > > > > > > >
> > > > > > > > > > > > Hi,
> > > > > > > > > > > >
> > > > > > > > > > > > I fnaly install
> > > > > > > > > > > > openmeetings-4.0.10. The
> > > > > > > > > > > > server seams to
> > > > > > > > > > > > run fine on the CentOS7
> > > > > > > > > > > > VM. I create my
> > > > > > > > > > > > first user and
> > > > > > > > > > > > try to connect from
> > > > > > > > > > > > outside. IThere is a
> > > > > > > > > > > > firewall and
> > > > > > > > > > > > only port 80 is open by
> > > > > > > > > > > > the lab. So in
> > > > > > > > > > > > /opt/red54010/conf/red5
> > > > > > > > > > > > .properties i've set
> > > > > > > > > > > > http.port=80
> > > > > > > > > > > > and now I can login
> > > > > > > > > > > > from home in
> > > > > > > > > > > > openmeeting.
> > > > > > > > > > > > But when testing the
> > > > > > > > > > > > camera and the
> > > > > > > > > > > > microphone I only
> > > > > > > > > > > > have "select your
> > > > > > > > > > > > langage" option ??? see
> > > > > > > > > > > > the screen
> > > > > > > > > > > > dump attached. My
> > > > > > > > > > > > laptop is CentOS7. Is
> > > > > > > > > > > > there some
> > > > > > > > > > > > additional software to
> > > > > > > > > > > > deploy for the
> > > > > > > > > > > > clients ?
> > > > > > > > > > > >
> > > > > > > > > > > > I'm a little bit
> > > > > > > > > > > > lost....
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks for your help
> > > > > > > > > > > >
> > > > > > > > > > > > Patrick
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Le 15/03/2020 à 12:02,
> > > > > > > > > > > > Patrick Bégou a
> > > > > > > > > > > > écrit :
> > > > > > > > > > > >
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > I'm deploying
> > > > > > > > > > > > > Openmeetings on a CentOS7
> > > > > > > > > > > > > VM in
> > > > > > > > > > > > > proxmoxVE. I follow
> > > > > > > > > > > > > the
> > > > > > > > > > > > > "Installation
> > > > > > > > > > > > > OpenMeetings 5.0.0-M3 on
> > > > > > > > > > > > > Centos 7.pdf"
> > > > > > > > > > > > > document.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > I'm stalled at te
> > > > > > > > > > > > > step opening the
> > > > > > > > > > > > > browser on
> > > > > > > > > > > > > https://localhost:5
> > > > > > > > > > > > > 443/openmeetings/
> > > > > > > > > > > > > as the answer is
> > > > > > > > > > > > > "HTTP404 not found"
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > I do not know
> > > > > > > > > > > > > tomcat at all, I've just
> > > > > > > > > > > > > changed the
> > > > > > > > > > > > > starting setup
> > > > > > > > > > > > > with
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > export CATALINA_OPT
> > > > > > > > > > > > > S="-Djava.net.preferIPV4Stack=true"
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > to make tomcat
> > > > > > > > > > > > > listening on IPV4 adresses
> > > > > > > > > > > > > and "netstat
> > > > > > > > > > > > > -a" show it is ok.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Any help
> > > > > > > > > > > > > appreciated and advices to make
> > > > > > > > > > > > > openmeeting
> > > > > > > > > > > > > listening on port
> > > > > > > > > > > > > 80 or 443 to
> > > > > > > > > > > > > finalize the setup.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Patrick
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > FUNAE, Fundo De Energia
> > > > > > > > > > > > - Disclaimer and
> > > > > > > > > > > > Confidentiality
> > > > > > > > > > > > Note
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > A informação contida
> > > > > > > > > > > > neste correio
> > > > > > > > > > > > electrónico é
> > > > > > > > > > > > confidencial e
> > > > > > > > > > > > privilegiada, destinando-se
> > > > > > > > > > > > unicamente à
> > > > > > > > > > > > pessoa ou entidade
> > > > > > > > > > > > acima indicada. Se o
> > > > > > > > > > > > leitor desta
> > > > > > > > > > > > mensagem não for o seu
> > > > > > > > > > > > destinatário, fica
> > > > > > > > > > > > pela presente
> > > > > > > > > > > > notificado de que
> > > > > > > > > > > > qualquer divulgação,
> > > > > > > > > > > > distribuição ou
> > > > > > > > > > > > reprodução do
> > > > > > > > > > > > respectivo conteúdo é
> > > > > > > > > > > > expressa e
> > > > > > > > > > > > estritamente proibida.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > The information
> > > > > > > > > > > > contained in this e-mail is
> > > > > > > > > > > > privileged
> > > > > > > > > > > > and confidential and is
> > > > > > > > > > > > intended only for
> > > > > > > > > > > > the use of the
> > > > > > > > > > > > individual or entity
> > > > > > > > > > > > named above. If the
> > > > > > > > > > > > reader of this
> > > > > > > > > > > > message is not the
> > > > > > > > > > > > intended recipient, you
> > > > > > > > > > > > are hereby
> > > > > > > > > > > > notified that any
> > > > > > > > > > > > dissemination,
> > > > > > > > > > > > distribution or
> > > > > > > > > > > > copying
> > > > > > > > > > > > of this communication
> > > > > > > > > > > > is strictly
> > > > > > > > > > > > prohibited.
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > WBR
> > > > > > > > > > Maxim aka solomax
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Ok, now is deleted. Tomorrow i'll upload the right ova file,with some
modifications in the desktop files about user systemname and so.
....................
El lun, 16-03-2020 a las 18:40 +0000, Daniel Baker escribió:
> Yes I got it , thanks.
>
>
> On 16/03/2020 18:21, Alvaro wrote:
>
>
>
> >
> > Daniel, do you downloaded the ova file?
> > I want delete it in 30 minutes.
> >
> >
> >
> >
> >
> >
> > .......................
> >
> >
> >
> >
> >
> >
> > El lun, 16-03-2020 a las 18:53 +0100, Alvaro escribió:
> >
> > > Ok, here is the link to download "OM_5.0.0-M3.ova"
> > > (VirtualBox):
> > >
> > >
> > >
> > > https://drive.google.com/file/d/1T5-nAmlmM_1Rvttl1jgaigRR
> > > 2xZf4GSM/view?usp=sharing
> > >
> > >
> > >
> > >
> > >
> > >
> > > ...............................................
> > >
> > >
> > >
> > >
> > >
> > >
> > > El lun, 16-03-2020 a las 18:43 +0100, Alvaro escribió:
> > >
> > > > Yes Daniel. Let me upload it and will come back with
> > > > the
> > > > url file to download.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ....................
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker
> > > > escribió:
> > > >
> > > > > Alvaro can you provide us with a virtualbox
> > > > > OVA
> > > > > file ?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 16/03/2020 17:34, Patrick Bégou wrote:
> > > > >
> > > > > > Hi Alvaro,
> > > > > >
> > > > > >
> > > > > >
> > > > > > it was my first attempt many days ago but
> > > > > > with
> > > > > > proxmox I wasn't
> > > > > > able to boot after installation. I think
> > > > > > today that
> > > > > > the problem
> > > > > > could be related to grub on /dev/sda1 instead
> > > > > > of
> > > > > > /dev/sda.... But
> > > > > > in the documentation, searching some help, I
> > > > > > found it
> > > > > > was not
> > > > > > intended for production. So I switch to OM4
> > > > > > May be I could try to create a new VM and
> > > > > > start again
> > > > > > with OM5 and
> > > > > > grub on /dev/sda.
> > > > > > It is just a little bit difficult as I have
> > > > > > to work
> > > > > > from home
> > > > > > (because of the coronavirus alert) and it is
> > > > > > less
> > > > > > easy (very little
> > > > > > network bandwith). My goal is to have
> > > > > > openmeetings to
> > > > > > work with the
> > > > > > research team while we are not allowed to
> > > > > > move from
> > > > > > home in France
> > > > > > (4 to 6 weeks).
> > > > > >
> > > > > >
> > > > > >
> > > > > > Patrick
> > > > > >
> > > > > >
> > > > > >
> > > > > > Le 16/03/2020 à 18:21, Alvaro a écrit :
> > > > > >
> > > > > > > I have installed the live iso OM 5.0.0-M3
> > > > > > > Ubuntu
> > > > > > > 18.04 in
> > > > > > > VirtualBox, and works right, login,
> > > > > > > browsing
> > > > > > > OpenMeetings
> > > > > > > and recording video at "Conference room"
> > > > > > > and
> > > > > > > "Interview room"
> > > > > > > with cam and mic.
> > > > > > > So try another configuration or so...
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ......................................
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > El lun, 16-03-2020 a las 17:52 +0100,
> > > > > > > Patrick Bégou
> > > > > > > escribió:
> > > > > > >
> > > > > > > > Hi Maxim,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > could provide a link to some tutorial
> > > > > > > > to setup
> > > > > > > > openmeeting in
> > > > > > > > https with RTPMS (if i understand it
> > > > > > > > is the
> > > > > > > > tunneling part)
> > > > > > > > with self signed certificates ?
> > > > > > > > I find documentation saying it works
> > > > > > > > "out-of-the-box" (https://
> > > > > > > > openmeetings.apache.org/HTTPS.html)
> > > > > > > > or some
> > > > > > > > document for 1.9
> > > > > > > > version and I'm not sure that 4.10
> > > > > > > > use the same
> > > > > > > > setup....
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > jee-config.xml file is quite complex
> > > > > > > > for me, I've
> > > > > > > > tried to
> > > > > > > > comment the first part ("without
> > > > > > > > ssl") and
> > > > > > > > uncomment the end
> > > > > > > > (removing a comment in the first
> > > > > > > > section as
> > > > > > > > recursive comments
> > > > > > > > are not allowed, line 35) but I stay
> > > > > > > > in http
> > > > > > > > (netstat -n shows
> > > > > > > > port 80 listening,)
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Patrick
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Le 16/03/2020 à 12:48, Maxim
> > > > > > > > Solodovnik a écrit :
> > > > > > > >
> > > > > > > > > Hello All,
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > It's been looong time I've
> > > > > > > > > installed OM on
> > > > > > > > > CentOS last time
> > > > > > > > > I hope Alvaro can answer these
> > > > > > > > > question :)
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > According to ports
> > > > > > > > > 1) for 5.0 you need to modify
> > > > > > > > > server.xml
> > > > > > > > > 2) for 4.0 you need to modify
> > > > > > > > > jee-config.xml
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > According to devices
> > > > > > > > > You need
> > > > > > > > > 1) HTTPS
> > > > > > > > > 2*) Flash browser plugin for 4.0
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Mon, 16 Mar 2020 at 16:35,
> > > > > > > > > Stefan Kühl
> > > > > > > > > <stefan@quatrekuehl
> > > > > > > > > .eu> wrote:
> > > > > > > > >
> > > > > > > > > > Hey @all,
> > > > > > > > > > what kind of vitrualizing
> > > > > > > > > > software do you
> > > > > > > > > > use?
> > > > > > > > > > As far as I know is it for
> > > > > > > > > > OM4 necessary that
> > > > > > > > > > the cam and
> > > > > > > > > > headset were assigned to the
> > > > > > > > > > vm and not to
> > > > > > > > > > the host.
> > > > > > > > > > Greetz
> > > > > > > > > > Hoschie
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Am 16.03.2020 10:46, schrieb
> > > > > > > > > > Sansao Machiana:
> > > > > > > > > >
> > > > > > > > > > > i have same problem on my
> > > > > > > > > > > ubuntu
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Sansão Machiana
> > > > > > > > > > > FUNAE - Fundo de Energia
> > > > > > > > > > > Unidade de Tecnologias de
> > > > > > > > > > > Informação e
> > > > > > > > > > > Comunicação
> > > > > > > > > > > R. da Imprensa, nº 256 -
> > > > > > > > > > > 6º andar, porta
> > > > > > > > > > > 607 - 610
> > > > > > > > > > > Tel. +258 21 304717/+258
> > > > > > > > > > > 21 304720
> > > > > > > > > > > E-mail: sansaomachiana@f
> > > > > > > > > > > unae.co.mz
> > > > > > > > > > > Maputo - Moçambique
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Por favor pense no Meio
> > > > > > > > > > > Ambiente, antes de
> > > > > > > > > > > imprimir este
> > > > > > > > > > > e-mail
> > > > > > > > > > > De: Patrick Bégou <Patric
> > > > > > > > > > > k.Begou@legi.grenoble-inp.fr>
> > > > > > > > > > > Enviado: 16 de março de
> > > > > > > > > > > 2020 11:15
> > > > > > > > > > > Para: Openmeetings user-
> > > > > > > > > > > list
> > > > > > > > > > > Assunto: Re: Deploying
> > > > > > > > > > > Openmeeting 5 on
> > > > > > > > > > > Centos7
> > > > > > > > > > >
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > I fnaly install
> > > > > > > > > > > openmeetings-4.0.10. The
> > > > > > > > > > > server seams to
> > > > > > > > > > > run fine on the CentOS7
> > > > > > > > > > > VM. I create my
> > > > > > > > > > > first user and
> > > > > > > > > > > try to connect from
> > > > > > > > > > > outside. IThere is a
> > > > > > > > > > > firewall and
> > > > > > > > > > > only port 80 is open by
> > > > > > > > > > > the lab. So in
> > > > > > > > > > > /opt/red54010/conf/red5.p
> > > > > > > > > > > roperties i've set
> > > > > > > > > > > http.port=80
> > > > > > > > > > > and now I can login from
> > > > > > > > > > > home in
> > > > > > > > > > > openmeeting.
> > > > > > > > > > > But when testing the
> > > > > > > > > > > camera and the
> > > > > > > > > > > microphone I only
> > > > > > > > > > > have "select your
> > > > > > > > > > > langage" option ??? see
> > > > > > > > > > > the screen
> > > > > > > > > > > dump attached. My laptop
> > > > > > > > > > > is CentOS7. Is
> > > > > > > > > > > there some
> > > > > > > > > > > additional software to
> > > > > > > > > > > deploy for the
> > > > > > > > > > > clients ?
> > > > > > > > > > >
> > > > > > > > > > > I'm a little bit lost....
> > > > > > > > > > >
> > > > > > > > > > > Thanks for your help
> > > > > > > > > > >
> > > > > > > > > > > Patrick
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Le 15/03/2020 à 12:02,
> > > > > > > > > > > Patrick Bégou a
> > > > > > > > > > > écrit :
> > > > > > > > > > >
> > > > > > > > > > > > Hi,
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I'm deploying
> > > > > > > > > > > > Openmeetings on a CentOS7
> > > > > > > > > > > > VM in
> > > > > > > > > > > > proxmoxVE. I follow
> > > > > > > > > > > > the
> > > > > > > > > > > > "Installation
> > > > > > > > > > > > OpenMeetings 5.0.0-M3 on
> > > > > > > > > > > > Centos 7.pdf"
> > > > > > > > > > > > document.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I'm stalled at te
> > > > > > > > > > > > step opening the
> > > > > > > > > > > > browser on
> > > > > > > > > > > > https://localhost:544
> > > > > > > > > > > > 3/openmeetings/
> > > > > > > > > > > > as the answer is
> > > > > > > > > > > > "HTTP404 not found"
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I do not know tomcat
> > > > > > > > > > > > at all, I've just
> > > > > > > > > > > > changed the
> > > > > > > > > > > > starting setup with
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > export CATALINA_OPTS=
> > > > > > > > > > > > "-Djava.net.preferIPV4Stack=true"
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > to make tomcat
> > > > > > > > > > > > listening on IPV4 adresses
> > > > > > > > > > > > and "netstat
> > > > > > > > > > > > -a" show it is ok.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Any help appreciated
> > > > > > > > > > > > and advices to make
> > > > > > > > > > > > openmeeting
> > > > > > > > > > > > listening on port
> > > > > > > > > > > > 80 or 443 to finalize
> > > > > > > > > > > > the setup.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Patrick
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > FUNAE, Fundo De Energia -
> > > > > > > > > > > Disclaimer and
> > > > > > > > > > > Confidentiality
> > > > > > > > > > > Note
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > A informação contida
> > > > > > > > > > > neste correio
> > > > > > > > > > > electrónico é
> > > > > > > > > > > confidencial e
> > > > > > > > > > > privilegiada, destinando-se
> > > > > > > > > > > unicamente à
> > > > > > > > > > > pessoa ou entidade acima
> > > > > > > > > > > indicada. Se o
> > > > > > > > > > > leitor desta
> > > > > > > > > > > mensagem não for o seu
> > > > > > > > > > > destinatário, fica
> > > > > > > > > > > pela presente
> > > > > > > > > > > notificado de que
> > > > > > > > > > > qualquer divulgação,
> > > > > > > > > > > distribuição ou
> > > > > > > > > > > reprodução do respectivo
> > > > > > > > > > > conteúdo é
> > > > > > > > > > > expressa e
> > > > > > > > > > > estritamente proibida.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > The information contained
> > > > > > > > > > > in this e-mail is
> > > > > > > > > > > privileged
> > > > > > > > > > > and confidential and is
> > > > > > > > > > > intended only for
> > > > > > > > > > > the use of the
> > > > > > > > > > > individual or entity
> > > > > > > > > > > named above. If the
> > > > > > > > > > > reader of this
> > > > > > > > > > > message is not the
> > > > > > > > > > > intended recipient, you
> > > > > > > > > > > are hereby
> > > > > > > > > > > notified that any
> > > > > > > > > > > dissemination,
> > > > > > > > > > > distribution or copying
> > > > > > > > > > > of this communication is
> > > > > > > > > > > strictly
> > > > > > > > > > > prohibited.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > WBR
> > > > > > > > > Maxim aka solomax
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
>
Re: Deploying Openmeeting 5 on Centos7
Posted by Daniel Baker <in...@collisiondetection.biz>.
Yes I got it , thanks.
On 16/03/2020 18:21, Alvaro wrote:
> Daniel, do you downloaded the ova file?
> I want delete it in 30 minutes.
>
>
> .......................
>
>
> El lun, 16-03-2020 a las 18:53 +0100, Alvaro escribió:
>> Ok, here is the link to download "OM_5.0.0-M3.ova" (VirtualBox):
>>
>> https://drive.google.com/file/d/1T5-nAmlmM_1Rvttl1jgaigRR2xZf4GSM/view?usp=sharing
>>
>>
>> ...............................................
>>
>>
>> El lun, 16-03-2020 a las 18:43 +0100, Alvaro escribió:
>>> Yes Daniel. Let me upload it and will come back with the
>>> url file to download.
>>>
>>>
>>>
>>> ....................
>>>
>>>
>>>
>>> El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker escribió:
>>>> Alvaro can you provide us with a virtualbox OVA file ?
>>>>
>>>>
>>>> On 16/03/2020 17:34, Patrick Bégou wrote:
>>>>> Hi Alvaro,
>>>>>
>>>>> it was my first attempt many days ago but with proxmox I wasn't
>>>>> able to boot after installation. I think today that the problem
>>>>> could be related to grub on /dev/sda1 instead of /dev/sda.... But
>>>>> in the documentation, searching some help, I found it was not
>>>>> intended for production. So I switch to OM4
>>>>> May be I could try to create a new VM and start again with OM5 and
>>>>> grub on /dev/sda.
>>>>> It is just a little bit difficult as I have to work from home
>>>>> (because of the coronavirus alert) and it is less easy (very little
>>>>> network bandwith). My goal is to have openmeetings to work with the
>>>>> research team while we are not allowed to move from home in France
>>>>> (4 to 6 weeks).
>>>>>
>>>>> Patrick
>>>>>
>>>>> Le 16/03/2020 à 18:21, Alvaro a écrit :
>>>>>> I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
>>>>>> VirtualBox, and works right, login, browsing OpenMeetings
>>>>>> and recording video at "Conference room" and "Interview room"
>>>>>> with cam and mic.
>>>>>> So try another configuration or so...
>>>>>>
>>>>>>
>>>>>>
>>>>>> ......................................
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
>>>>>>> Hi Maxim,
>>>>>>>
>>>>>>> could provide a link to some tutorial to setup openmeeting in
>>>>>>> https with RTPMS (if i understand it is the tunneling part)
>>>>>>> with self signed certificates ?
>>>>>>> I find documentation saying it works "out-of-the-box" (https://
>>>>>>> openmeetings.apache.org/HTTPS.html) or some document for 1.9
>>>>>>> version and I'm not sure that 4.10 use the same setup....
>>>>>>>
>>>>>>> jee-config.xml file is quite complex for me, I've tried to
>>>>>>> comment the first part ("without ssl") and uncomment the end
>>>>>>> (removing a comment in the first section as recursive comments
>>>>>>> are not allowed, line 35) but I stay in http (netstat -n shows
>>>>>>> port 80 listening,)
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Patrick
>>>>>>>
>>>>>>> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>>>>>>>> Hello All,
>>>>>>>>
>>>>>>>> It's been looong time I've installed OM on CentOS last time
>>>>>>>> I hope Alvaro can answer these question :)
>>>>>>>>
>>>>>>>> According to ports
>>>>>>>> 1) for 5.0 you need to modify server.xml
>>>>>>>> 2) for 4.0 you need to modify jee-config.xml
>>>>>>>>
>>>>>>>> According to devices
>>>>>>>> You need
>>>>>>>> 1) HTTPS
>>>>>>>> 2*) Flash browser plugin for 4.0
>>>>>>>>
>>>>>>>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl
>>>>>>>> .eu> wrote:
>>>>>>>>> Hey @all,
>>>>>>>>> what kind of vitrualizing software do you use?
>>>>>>>>> As far as I know is it for OM4 necessary that the cam and
>>>>>>>>> headset were assigned to the vm and not to the host.
>>>>>>>>> Greetz
>>>>>>>>> Hoschie
>>>>>>>>>
>>>>>>>>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>>>>>>>>> i have same problem on my ubuntu
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Sansão Machiana
>>>>>>>>>> FUNAE - Fundo de Energia
>>>>>>>>>> Unidade de Tecnologias de Informação e Comunicação
>>>>>>>>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>>>>>>>> Tel. +258 21 304717/+258 21 304720
>>>>>>>>>> E-mail: sansaomachiana@funae.co.mz
>>>>>>>>>> <ma...@funae.co.mz>
>>>>>>>>>> Maputo - Moçambique
>>>>>>>>>> Por favor pense no Meio Ambiente, antes de imprimir este
>>>>>>>>>> e-mail
>>>>>>>>>> De: Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
>>>>>>>>>> <ma...@legi.grenoble-inp.fr>>
>>>>>>>>>> Enviado: 16 de março de 2020 11:15
>>>>>>>>>> Para: Openmeetings user-list
>>>>>>>>>> Assunto: Re: Deploying Openmeeting 5 on Centos7
>>>>>>>>>> Hi,
>>>>>>>>>> I fnaly install openmeetings-4.0.10. The server seams to
>>>>>>>>>> run fine on the CentOS7 VM. I create my first user and
>>>>>>>>>> try to connect from outside. IThere is a firewall and
>>>>>>>>>> only port 80 is open by the lab. So in
>>>>>>>>>> /opt/red54010/conf/red5.properties i've set http.port=80
>>>>>>>>>> and now I can login from home in openmeeting.
>>>>>>>>>> But when testing the camera and the microphone I only
>>>>>>>>>> have "select your langage" option ??? see the screen
>>>>>>>>>> dump attached. My laptop is CentOS7. Is there some
>>>>>>>>>> additional software to deploy for the clients ?
>>>>>>>>>> I'm a little bit lost....
>>>>>>>>>> Thanks for your help
>>>>>>>>>> Patrick
>>>>>>>>>>
>>>>>>>>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> I'm deploying Openmeetings on a CentOS7 VM in
>>>>>>>>>>> proxmoxVE. I follow the
>>>>>>>>>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf"
>>>>>>>>>>> document.
>>>>>>>>>>>
>>>>>>>>>>> I'm stalled at te step opening the browser on
>>>>>>>>>>> https://localhost:5443/openmeetings/ as the answer is
>>>>>>>>>>> "HTTP404 not found"
>>>>>>>>>>>
>>>>>>>>>>> I do not know tomcat at all, I've just changed the
>>>>>>>>>>> starting setup with
>>>>>>>>>>>
>>>>>>>>>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>>>>>>>>>
>>>>>>>>>>> to make tomcat listening on IPV4 adresses and "netstat
>>>>>>>>>>> -a" show it is ok.
>>>>>>>>>>>
>>>>>>>>>>> Any help appreciated and advices to make openmeeting
>>>>>>>>>>> listening on port
>>>>>>>>>>> 80 or 443 to finalize the setup.
>>>>>>>>>>>
>>>>>>>>>>> Patrick
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality
>>>>>>>>>> Note
>>>>>>>>>>
>>>>>>>>>> A informação contida neste correio electrónico é
>>>>>>>>>> confidencial e privilegiada, destinando-se unicamente à
>>>>>>>>>> pessoa ou entidade acima indicada. Se o leitor desta
>>>>>>>>>> mensagem não for o seu destinatário, fica pela presente
>>>>>>>>>> notificado de que qualquer divulgação, distribuição ou
>>>>>>>>>> reprodução do respectivo conteúdo é expressa e
>>>>>>>>>> estritamente proibida.
>>>>>>>>>>
>>>>>>>>>> The information contained in this e-mail is privileged
>>>>>>>>>> and confidential and is intended only for the use of the
>>>>>>>>>> individual or entity named above. If the reader of this
>>>>>>>>>> message is not the intended recipient, you are hereby
>>>>>>>>>> notified that any dissemination, distribution or copying
>>>>>>>>>> of this communication is strictly prohibited.
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> WBR
>>>>>>>> Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Daniel, do you downloaded the ova file?I want delete it in 30 minutes.
.......................
El lun, 16-03-2020 a las 18:53 +0100, Alvaro escribió:
> Ok, here is the link to download "OM_5.0.0-M3.ova" (VirtualBox):
> https://drive.google.com/file/d/1T5-nAmlmM_1Rvttl1jgaigRR2xZf4GSM/vie
> w?usp=sharing
>
> ...............................................
>
> El lun, 16-03-2020 a las 18:43 +0100, Alvaro escribió:
> > Yes Daniel. Let me upload it and will come back with theurl file to
> > download.
> >
> >
> > ....................
> >
> >
> > El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker escribió:
> > > Alvaro can you provide us with a virtualbox OVA file ?
> > >
> > > On 16/03/2020 17:34, Patrick Bégou wrote:
> > > > Hi Alvaro,
> > > > it was my first attempt many days ago but with proxmox I
> > > > wasn'table to boot after installation. I think today that the
> > > > problemcould be related to grub on /dev/sda1 instead of
> > > > /dev/sda.... Butin the documentation, searching some help, I
> > > > found it was notintended for production. So I switch to OM4May
> > > > be I could try to create a new VM and start again with OM5
> > > > andgrub on /dev/sda. It is just a little bit difficult as I
> > > > have to work from home(because of the coronavirus alert) and it
> > > > is less easy (very littlenetwork bandwith). My goal is to have
> > > > openmeetings to work with theresearch team while we are not
> > > > allowed to move from home in France(4 to 6 weeks).
> > > > Patrick
> > > > Le 16/03/2020 à 18:21, Alvaro a écrit :
> > > > > I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04
> > > > > inVirtualBox, and works right, login, browsing
> > > > > OpenMeetingsand recording video at "Conference room" and
> > > > > "Interview room"with cam and mic.So try another configuration
> > > > > or so...
> > > > >
> > > > >
> > > > > ......................................
> > > > >
> > > > >
> > > > >
> > > > > El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
> > > > > > Hi Maxim,
> > > > > > could provide a link to some tutorial to setup openmeeting
> > > > > > inhttps with RTPMS (if i understand it is the tunneling
> > > > > > part)with self signed certificates ?I find documentation
> > > > > > saying it works "out-of-the-box" (https://openmeetings.apac
> > > > > > he.org/HTTPS.html) or some document for 1.9version and I'm
> > > > > > not sure that 4.10 use the same setup....
> > > > > > jee-config.xml file is quite complex for me, I've tried
> > > > > > tocomment the first part ("without ssl") and uncomment the
> > > > > > end(removing a comment in the first section as recursive
> > > > > > commentsare not allowed, line 35) but I stay in http
> > > > > > (netstat -n showsport 80 listening,)
> > > > > > Thanks
> > > > > > Patrick
> > > > > > Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
> > > > > > > Hello All,
> > > > > > >
> > > > > > > It's been looong time I've installed OM on CentOS last
> > > > > > > time
> > > > > > > I hope Alvaro can answer these question :)
> > > > > > >
> > > > > > > According to ports
> > > > > > > 1) for 5.0 you need to modify server.xml
> > > > > > > 2) for 4.0 you need to modify jee-config.xml
> > > > > > >
> > > > > > > According to devices
> > > > > > > You need
> > > > > > > 1) HTTPS
> > > > > > > 2*) Flash browser plugin for 4.0
> > > > > > >
> > > > > > > On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrek
> > > > > > > uehl
> > > > > > > .eu> wrote:
> > > > > > > > Hey @all,what kind of vitrualizing software do you
> > > > > > > > use?As far as I know is it for OM4 necessary that the
> > > > > > > > cam andheadset were assigned to the vm and not to the
> > > > > > > > host.GreetzHoschie
> > > > > > > > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > > > > > > > > i have same problem on my ubuntu
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Sansão Machiana
> > > > > > > > > FUNAE - Fundo de Energia
> > > > > > > > > Unidade de Tecnologias de Informação e Comunicação
> > > > > > > > > R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
> > > > > > > > > Tel. +258 21 304717/+258 21 304720
> > > > > > > > > E-mail: sansaomachiana@funae.co.mz
> > > > > > > > > Maputo - Moçambique
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Por favor pense no Meio Ambiente, antes de imprimir
> > > > > > > > > este
> > > > > > > > > e-mail
> > > > > > > > > De: Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
> > > > > > > > > >
> > > > > > > > > Enviado: 16 de março de 2020 11:15
> > > > > > > > > Para: Openmeetings user-list
> > > > > > > > > Assunto: Re: Deploying Openmeeting 5 on Centos7
> > > > > > > > >
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > > I fnaly install openmeetings-4.0.10. The server seams
> > > > > > > > > to
> > > > > > > > > run fine on the CentOS7 VM. I create my first user
> > > > > > > > > and
> > > > > > > > > try to connect from outside. IThere is a firewall and
> > > > > > > > > only port 80 is open by the lab. So in
> > > > > > > > > /opt/red54010/conf/red5.properties i've set
> > > > > > > > > http.port=80
> > > > > > > > > and now I can login from home in openmeeting.
> > > > > > > > > But when testing the camera and the microphone I only
> > > > > > > > > have "select your langage" option ??? see the screen
> > > > > > > > > dump attached. My laptop is CentOS7. Is there some
> > > > > > > > > additional software to deploy for the clients ?
> > > > > > > > >
> > > > > > > > > I'm a little bit lost....
> > > > > > > > >
> > > > > > > > > Thanks for your help
> > > > > > > > >
> > > > > > > > > Patrick
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
> > > > > > > > > > Hi,
> > > > > > > > > >
> > > > > > > > > > I'm deploying Openmeetings on a CentOS7 VM in
> > > > > > > > > > proxmoxVE. I follow the
> > > > > > > > > > "Installation OpenMeetings 5.0.0-M3 on Centos
> > > > > > > > > > 7.pdf"
> > > > > > > > > > document.
> > > > > > > > > >
> > > > > > > > > > I'm stalled at te step opening the browser on
> > > > > > > > > > https://localhost:5443/openmeetings/ as the answer
> > > > > > > > > > is
> > > > > > > > > > "HTTP404 not found"
> > > > > > > > > >
> > > > > > > > > > I do not know tomcat at all, I've just changed the
> > > > > > > > > > starting setup with
> > > > > > > > > >
> > > > > > > > > > export CATALINA_OPTS="-
> > > > > > > > > > Djava.net.preferIPV4Stack=true"
> > > > > > > > > >
> > > > > > > > > > to make tomcat listening on IPV4 adresses and
> > > > > > > > > > "netstat
> > > > > > > > > > -a" show it is ok.
> > > > > > > > > >
> > > > > > > > > > Any help appreciated and advices to make
> > > > > > > > > > openmeeting
> > > > > > > > > > listening on port
> > > > > > > > > > 80 or 443 to finalize the setup.
> > > > > > > > > >
> > > > > > > > > > Patrick
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > FUNAE, Fundo De Energia - Disclaimer and
> > > > > > > > > Confidentiality
> > > > > > > > > Note
> > > > > > > > >
> > > > > > > > > A informação contida neste correio electrónico é
> > > > > > > > > confidencial e privilegiada, destinando-se unicamente
> > > > > > > > > à
> > > > > > > > > pessoa ou entidade acima indicada. Se o leitor desta
> > > > > > > > > mensagem não for o seu destinatário, fica pela
> > > > > > > > > presente
> > > > > > > > > notificado de que qualquer divulgação, distribuição
> > > > > > > > > ou
> > > > > > > > > reprodução do respectivo conteúdo é expressa e
> > > > > > > > > estritamente proibida.
> > > > > > > > >
> > > > > > > > > The information contained in this e-mail is
> > > > > > > > > privileged
> > > > > > > > > and confidential and is intended only for the use of
> > > > > > > > > the
> > > > > > > > > individual or entity named above. If the reader of
> > > > > > > > > this
> > > > > > > > > message is not the intended recipient, you are hereby
> > > > > > > > > notified that any dissemination, distribution or
> > > > > > > > > copying
> > > > > > > > > of this communication is strictly prohibited.
> > > > > > >
> > > > > > > --
> > > > > > > WBR
> > > > > > > Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Ok, here is the link to download "OM_5.0.0-M3.ova" (VirtualBox):
https://drive.google.com/file/d/1T5-nAmlmM_1Rvttl1jgaigRR2xZf4GSM/view?
usp=sharing
...............................................
El lun, 16-03-2020 a las 18:43 +0100, Alvaro escribió:
> Yes Daniel. Let me upload it and will come back with the
> url file to download.
>
>
>
> ....................
>
>
>
> El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker escribió:
> > Alvaro can you provide us with a virtualbox OVA file ?
> >
> >
> > On 16/03/2020 17:34, Patrick Bégou wrote:
> > > Hi Alvaro,
> > >
> > > it was my first attempt many days ago but with proxmox I wasn't
> > > able to boot after installation. I think today that the problem
> > > could be related to grub on /dev/sda1 instead of /dev/sda.... But
> > > in the documentation, searching some help, I found it was not
> > > intended for production. So I switch to OM4
> > > May be I could try to create a new VM and start again with OM5
> > > and
> > > grub on /dev/sda.
> > > It is just a little bit difficult as I have to work from home
> > > (because of the coronavirus alert) and it is less easy (very
> > > little
> > > network bandwith). My goal is to have openmeetings to work with
> > > the
> > > research team while we are not allowed to move from home in
> > > France
> > > (4 to 6 weeks).
> > >
> > > Patrick
> > >
> > > Le 16/03/2020 à 18:21, Alvaro a écrit :
> > > > I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
> > > > VirtualBox, and works right, login, browsing OpenMeetings
> > > > and recording video at "Conference room" and "Interview room"
> > > > with cam and mic.
> > > > So try another configuration or so...
> > > >
> > > >
> > > >
> > > > ......................................
> > > >
> > > >
> > > >
> > > >
> > > > El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
> > > > > Hi Maxim,
> > > > >
> > > > > could provide a link to some tutorial to setup openmeeting in
> > > > > https with RTPMS (if i understand it is the tunneling part)
> > > > > with self signed certificates ?
> > > > > I find documentation saying it works "out-of-the-box"
> > > > > (https://
> > > > > openmeetings.apache.org/HTTPS.html) or some document for 1.9
> > > > > version and I'm not sure that 4.10 use the same setup....
> > > > >
> > > > > jee-config.xml file is quite complex for me, I've tried to
> > > > > comment the first part ("without ssl") and uncomment the end
> > > > > (removing a comment in the first section as recursive
> > > > > comments
> > > > > are not allowed, line 35) but I stay in http (netstat -n
> > > > > shows
> > > > > port 80 listening,)
> > > > >
> > > > > Thanks
> > > > >
> > > > > Patrick
> > > > >
> > > > > Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
> > > > > > Hello All,
> > > > > >
> > > > > > It's been looong time I've installed OM on CentOS last time
> > > > > > I hope Alvaro can answer these question :)
> > > > > >
> > > > > > According to ports
> > > > > > 1) for 5.0 you need to modify server.xml
> > > > > > 2) for 4.0 you need to modify jee-config.xml
> > > > > >
> > > > > > According to devices
> > > > > > You need
> > > > > > 1) HTTPS
> > > > > > 2*) Flash browser plugin for 4.0
> > > > > >
> > > > > > On Mon, 16 Mar 2020 at 16:35, Stefan Kühl
> > > > > > <stefan@quatrekuehl
> > > > > > .eu> wrote:
> > > > > > > Hey @all,
> > > > > > > what kind of vitrualizing software do you use?
> > > > > > > As far as I know is it for OM4 necessary that the cam and
> > > > > > > headset were assigned to the vm and not to the host.
> > > > > > > Greetz
> > > > > > > Hoschie
> > > > > > >
> > > > > > >
> > > > > > > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > > > > > > > i have same problem on my ubuntu
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Sansão Machiana
> > > > > > > > FUNAE - Fundo de Energia
> > > > > > > > Unidade de Tecnologias de Informação e Comunicação
> > > > > > > > R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
> > > > > > > > Tel. +258 21 304717/+258 21 304720
> > > > > > > > E-mail: sansaomachiana@funae.co.mz
> > > > > > > > Maputo - Moçambique
> > > > > > > >
> > > > > > > >
> > > > > > > > Por favor pense no Meio Ambiente, antes de imprimir
> > > > > > > > este
> > > > > > > > e-mail
> > > > > > > > De: Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> > > > > > > > Enviado: 16 de março de 2020 11:15
> > > > > > > > Para: Openmeetings user-list
> > > > > > > > Assunto: Re: Deploying Openmeeting 5 on Centos7
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I fnaly install openmeetings-4.0.10. The server seams
> > > > > > > > to
> > > > > > > > run fine on the CentOS7 VM. I create my first user and
> > > > > > > > try to connect from outside. IThere is a firewall and
> > > > > > > > only port 80 is open by the lab. So in
> > > > > > > > /opt/red54010/conf/red5.properties i've set
> > > > > > > > http.port=80
> > > > > > > > and now I can login from home in openmeeting.
> > > > > > > > But when testing the camera and the microphone I only
> > > > > > > > have "select your langage" option ??? see the screen
> > > > > > > > dump attached. My laptop is CentOS7. Is there some
> > > > > > > > additional software to deploy for the clients ?
> > > > > > > >
> > > > > > > > I'm a little bit lost....
> > > > > > > >
> > > > > > > > Thanks for your help
> > > > > > > >
> > > > > > > > Patrick
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > > I'm deploying Openmeetings on a CentOS7 VM in
> > > > > > > > > proxmoxVE. I follow the
> > > > > > > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf"
> > > > > > > > > document.
> > > > > > > > >
> > > > > > > > > I'm stalled at te step opening the browser on
> > > > > > > > > https://localhost:5443/openmeetings/ as the answer is
> > > > > > > > > "HTTP404 not found"
> > > > > > > > >
> > > > > > > > > I do not know tomcat at all, I've just changed the
> > > > > > > > > starting setup with
> > > > > > > > >
> > > > > > > > > export CATALINA_OPTS="-
> > > > > > > > > Djava.net.preferIPV4Stack=true"
> > > > > > > > >
> > > > > > > > > to make tomcat listening on IPV4 adresses and
> > > > > > > > > "netstat
> > > > > > > > > -a" show it is ok.
> > > > > > > > >
> > > > > > > > > Any help appreciated and advices to make openmeeting
> > > > > > > > > listening on port
> > > > > > > > > 80 or 443 to finalize the setup.
> > > > > > > > >
> > > > > > > > > Patrick
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > FUNAE, Fundo De Energia - Disclaimer and
> > > > > > > > Confidentiality
> > > > > > > > Note
> > > > > > > >
> > > > > > > > A informação contida neste correio electrónico é
> > > > > > > > confidencial e privilegiada, destinando-se unicamente à
> > > > > > > > pessoa ou entidade acima indicada. Se o leitor desta
> > > > > > > > mensagem não for o seu destinatário, fica pela presente
> > > > > > > > notificado de que qualquer divulgação, distribuição ou
> > > > > > > > reprodução do respectivo conteúdo é expressa e
> > > > > > > > estritamente proibida.
> > > > > > > >
> > > > > > > > The information contained in this e-mail is privileged
> > > > > > > > and confidential and is intended only for the use of
> > > > > > > > the
> > > > > > > > individual or entity named above. If the reader of this
> > > > > > > > message is not the intended recipient, you are hereby
> > > > > > > > notified that any dissemination, distribution or
> > > > > > > > copying
> > > > > > > > of this communication is strictly prohibited.
> > > > > >
> > > > > >
> > > > > > --
> > > > > > WBR
> > > > > > Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Yes Daniel. Let me upload it and will come back with the
url file to download.
....................
El lun, 16-03-2020 a las 17:39 +0000, Daniel Baker escribió:
> Alvaro can you provide us with a virtualbox OVA file ?
>
>
> On 16/03/2020 17:34, Patrick Bégou wrote:
> > Hi Alvaro,
> >
> > it was my first attempt many days ago but with proxmox I wasn't
> > able to boot after installation. I think today that the problem
> > could be related to grub on /dev/sda1 instead of /dev/sda.... But
> > in the documentation, searching some help, I found it was not
> > intended for production. So I switch to OM4
> > May be I could try to create a new VM and start again with OM5 and
> > grub on /dev/sda.
> > It is just a little bit difficult as I have to work from home
> > (because of the coronavirus alert) and it is less easy (very little
> > network bandwith). My goal is to have openmeetings to work with the
> > research team while we are not allowed to move from home in France
> > (4 to 6 weeks).
> >
> > Patrick
> >
> > Le 16/03/2020 à 18:21, Alvaro a écrit :
> > > I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
> > > VirtualBox, and works right, login, browsing OpenMeetings
> > > and recording video at "Conference room" and "Interview room"
> > > with cam and mic.
> > > So try another configuration or so...
> > >
> > >
> > >
> > > ......................................
> > >
> > >
> > >
> > >
> > > El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
> > > > Hi Maxim,
> > > >
> > > > could provide a link to some tutorial to setup openmeeting in
> > > > https with RTPMS (if i understand it is the tunneling part)
> > > > with self signed certificates ?
> > > > I find documentation saying it works "out-of-the-box" (https://
> > > > openmeetings.apache.org/HTTPS.html) or some document for 1.9
> > > > version and I'm not sure that 4.10 use the same setup....
> > > >
> > > > jee-config.xml file is quite complex for me, I've tried to
> > > > comment the first part ("without ssl") and uncomment the end
> > > > (removing a comment in the first section as recursive comments
> > > > are not allowed, line 35) but I stay in http (netstat -n shows
> > > > port 80 listening,)
> > > >
> > > > Thanks
> > > >
> > > > Patrick
> > > >
> > > > Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
> > > > > Hello All,
> > > > >
> > > > > It's been looong time I've installed OM on CentOS last time
> > > > > I hope Alvaro can answer these question :)
> > > > >
> > > > > According to ports
> > > > > 1) for 5.0 you need to modify server.xml
> > > > > 2) for 4.0 you need to modify jee-config.xml
> > > > >
> > > > > According to devices
> > > > > You need
> > > > > 1) HTTPS
> > > > > 2*) Flash browser plugin for 4.0
> > > > >
> > > > > On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl
> > > > > .eu> wrote:
> > > > > > Hey @all,
> > > > > > what kind of vitrualizing software do you use?
> > > > > > As far as I know is it for OM4 necessary that the cam and
> > > > > > headset were assigned to the vm and not to the host.
> > > > > > Greetz
> > > > > > Hoschie
> > > > > >
> > > > > >
> > > > > > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > > > > > > i have same problem on my ubuntu
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Sansão Machiana
> > > > > > > FUNAE - Fundo de Energia
> > > > > > > Unidade de Tecnologias de Informação e Comunicação
> > > > > > > R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
> > > > > > > Tel. +258 21 304717/+258 21 304720
> > > > > > > E-mail: sansaomachiana@funae.co.mz
> > > > > > > Maputo - Moçambique
> > > > > > >
> > > > > > >
> > > > > > > Por favor pense no Meio Ambiente, antes de imprimir este
> > > > > > > e-mail
> > > > > > > De: Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> > > > > > > Enviado: 16 de março de 2020 11:15
> > > > > > > Para: Openmeetings user-list
> > > > > > > Assunto: Re: Deploying Openmeeting 5 on Centos7
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I fnaly install openmeetings-4.0.10. The server seams to
> > > > > > > run fine on the CentOS7 VM. I create my first user and
> > > > > > > try to connect from outside. IThere is a firewall and
> > > > > > > only port 80 is open by the lab. So in
> > > > > > > /opt/red54010/conf/red5.properties i've set http.port=80
> > > > > > > and now I can login from home in openmeeting.
> > > > > > > But when testing the camera and the microphone I only
> > > > > > > have "select your langage" option ??? see the screen
> > > > > > > dump attached. My laptop is CentOS7. Is there some
> > > > > > > additional software to deploy for the clients ?
> > > > > > >
> > > > > > > I'm a little bit lost....
> > > > > > >
> > > > > > > Thanks for your help
> > > > > > >
> > > > > > > Patrick
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I'm deploying Openmeetings on a CentOS7 VM in
> > > > > > > > proxmoxVE. I follow the
> > > > > > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf"
> > > > > > > > document.
> > > > > > > >
> > > > > > > > I'm stalled at te step opening the browser on
> > > > > > > > https://localhost:5443/openmeetings/ as the answer is
> > > > > > > > "HTTP404 not found"
> > > > > > > >
> > > > > > > > I do not know tomcat at all, I've just changed the
> > > > > > > > starting setup with
> > > > > > > >
> > > > > > > > export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
> > > > > > > >
> > > > > > > > to make tomcat listening on IPV4 adresses and "netstat
> > > > > > > > -a" show it is ok.
> > > > > > > >
> > > > > > > > Any help appreciated and advices to make openmeeting
> > > > > > > > listening on port
> > > > > > > > 80 or 443 to finalize the setup.
> > > > > > > >
> > > > > > > > Patrick
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > FUNAE, Fundo De Energia - Disclaimer and Confidentiality
> > > > > > > Note
> > > > > > >
> > > > > > > A informação contida neste correio electrónico é
> > > > > > > confidencial e privilegiada, destinando-se unicamente à
> > > > > > > pessoa ou entidade acima indicada. Se o leitor desta
> > > > > > > mensagem não for o seu destinatário, fica pela presente
> > > > > > > notificado de que qualquer divulgação, distribuição ou
> > > > > > > reprodução do respectivo conteúdo é expressa e
> > > > > > > estritamente proibida.
> > > > > > >
> > > > > > > The information contained in this e-mail is privileged
> > > > > > > and confidential and is intended only for the use of the
> > > > > > > individual or entity named above. If the reader of this
> > > > > > > message is not the intended recipient, you are hereby
> > > > > > > notified that any dissemination, distribution or copying
> > > > > > > of this communication is strictly prohibited.
> > > > >
> > > > >
> > > > > --
> > > > > WBR
> > > > > Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Daniel Baker <in...@collisiondetection.biz>.
Alvaro can you provide us with a virtualbox OVA file ?
On 16/03/2020 17:34, Patrick Bégou wrote:
> Hi Alvaro,
>
> it was my first attempt many days ago but with proxmox I wasn't able
> to boot after installation. I think today that the problem could be
> related to grub on /dev/sda1 instead of /dev/sda.... But in the
> documentation, searching some help, I found it was not intended for
> production. So I switch to OM4
> May be I could try to create a new VM and start again with OM5 and
> grub on /dev/sda.
> It is just a little bit difficult as I have to work from home (because
> of the coronavirus alert) and it is less easy (very little network
> bandwith). My goal is to have openmeetings to work with the research
> team while we are not allowed to move from home in France (4 to 6 weeks).
>
> Patrick
>
> Le 16/03/2020 à 18:21, Alvaro a écrit :
>> I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
>> VirtualBox, and works right, login, browsing OpenMeetings
>> and recording video at "Conference room" and "Interview room"
>> with cam and mic.
>> So try another configuration or so...
>>
>>
>>
>> ......................................
>>
>>
>>
>>
>> El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
>>> Hi Maxim,
>>>
>>> could provide a link to some tutorial to setup openmeeting in https
>>> with RTPMS (if i understand it is the tunneling part) with self
>>> signed certificates ?
>>> I find documentation saying it works "out-of-the-box"
>>> (https://openmeetings.apache.org/HTTPS.html) or some document for
>>> 1.9 version and I'm not sure that 4.10 use the same setup....
>>>
>>> jee-config.xml file is quite complex for me, I've tried to comment
>>> the first part ("without ssl") and uncomment the end (removing a
>>> comment in the first section as recursive comments are not allowed,
>>> line 35) but I stay in http (netstat -n shows port 80 listening,)
>>>
>>> Thanks
>>>
>>> Patrick
>>>
>>> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>>>> Hello All,
>>>>
>>>> It's been looong time I've installed OM on CentOS last time
>>>> I hope Alvaro can answer these question :)
>>>>
>>>> According to ports
>>>> 1) for 5.0 you need to modify server.xml
>>>> 2) for 4.0 you need to modify jee-config.xml
>>>>
>>>> According to devices
>>>> You need
>>>> 1) HTTPS
>>>> 2*) Flash browser plugin for 4.0
>>>>
>>>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl.eu
>>>> <ma...@quatrekuehl.eu>> wrote:
>>>>>
>>>>> Hey @all,
>>>>>
>>>>> what kind of vitrualizing software do you use?
>>>>>
>>>>> As far as I know is it for OM4 necessary that the cam and headset
>>>>> were assigned to the vm and not to the host.
>>>>>
>>>>> Greetz
>>>>>
>>>>> Hoschie
>>>>>
>>>>>
>>>>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>>>>
>>>>>> i have same problem on my ubuntu
>>>>>>
>>>>>>
>>>>>>
>>>>>> Sansão Machiana
>>>>>>
>>>>>> *FUNAE - Fundo de Energia*
>>>>>>
>>>>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>>>>
>>>>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>>>>
>>>>>> Tel. +258 21 304717/+258 21 304720
>>>>>>
>>>>>> E-mail: sansaomachiana@funae.co.mz
>>>>>> <ma...@funae.co.mz>
>>>>>>
>>>>>> Maputo - Moçambique
>>>>>>
>>>>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>> *De:* Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
>>>>>> <ma...@legi.grenoble-inp.fr>>
>>>>>> *Enviado:* 16 de março de 2020 11:15
>>>>>> *Para:* Openmeetings user-list
>>>>>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>>>>> Hi,
>>>>>> I fnaly install openmeetings-4.0.10. The server seams to run fine
>>>>>> on the CentOS7 VM. I create my first user and try to connect from
>>>>>> outside. IThere is a firewall and only port 80 is open by the
>>>>>> lab. So in /opt/red54010/conf/red5.properties i've set
>>>>>> http.port=80 and now I can login from home in openmeeting.
>>>>>> But when testing the camera and the microphone I only have
>>>>>> "select your langage" option ??? see the screen dump attached.
>>>>>> My laptop is CentOS7. Is there some additional software to deploy
>>>>>> for the clients ?
>>>>>> I'm a little bit lost....
>>>>>> Thanks for your help
>>>>>> Patrick
>>>>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>>>>> Hi,
>>>>>>>
>>>>>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>>>>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>>>>>
>>>>>>> I'm stalled at te step opening the browser on
>>>>>>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>>>>>
>>>>>>> I do not know tomcat at all, I've just changed the starting setup with
>>>>>>>
>>>>>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>>>>>
>>>>>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>>>>>
>>>>>>> Any help appreciated and advices to make openmeeting listening on port
>>>>>>> 80 or 443 to finalize the setup.
>>>>>>>
>>>>>>> Patrick
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>>>>
>>>>>> A informação contida neste correio electrónico é confidencial e
>>>>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima
>>>>>> indicada. Se o leitor desta mensagem não for o seu destinatário,
>>>>>> fica pela presente notificado de que qualquer divulgação,
>>>>>> distribuição ou reprodução do respectivo conteúdo é expressa e
>>>>>> estritamente proibida.
>>>>>>
>>>>>> The information contained in this e-mail is privileged and
>>>>>> confidential and is intended only for the use of the individual
>>>>>> or entity named above. If the reader of this message is not the
>>>>>> intended recipient, you are hereby notified that any
>>>>>> dissemination, distribution or copying of this communication is
>>>>>> strictly prohibited.
>>>>>
>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>
>>>
>
Re: Deploying Openmeeting 5 on Centos7
Posted by Patrick Bégou <Pa...@legi.grenoble-inp.fr>.
Hi Alvaro,
it was my first attempt many days ago but with proxmox I wasn't able to
boot after installation. I think today that the problem could be related
to grub on /dev/sda1 instead of /dev/sda.... But in the documentation,
searching some help, I found it was not intended for production. So I
switch to OM4
May be I could try to create a new VM and start again with OM5 and grub
on /dev/sda.
It is just a little bit difficult as I have to work from home (because
of the coronavirus alert) and it is less easy (very little network
bandwith). My goal is to have openmeetings to work with the research
team while we are not allowed to move from home in France (4 to 6 weeks).
Patrick
Le 16/03/2020 à 18:21, Alvaro a écrit :
> I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 in
> VirtualBox, and works right, login, browsing OpenMeetings
> and recording video at "Conference room" and "Interview room"
> with cam and mic.
> So try another configuration or so...
>
>
>
> ......................................
>
>
>
>
> El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
>> Hi Maxim,
>>
>> could provide a link to some tutorial to setup openmeeting in https
>> with RTPMS (if i understand it is the tunneling part) with self
>> signed certificates ?
>> I find documentation saying it works "out-of-the-box"
>> (https://openmeetings.apache.org/HTTPS.html) or some document for 1.9
>> version and I'm not sure that 4.10 use the same setup....
>>
>> jee-config.xml file is quite complex for me, I've tried to comment
>> the first part ("without ssl") and uncomment the end (removing a
>> comment in the first section as recursive comments are not allowed,
>> line 35) but I stay in http (netstat -n shows port 80 listening,)
>>
>> Thanks
>>
>> Patrick
>>
>> Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
>>> Hello All,
>>>
>>> It's been looong time I've installed OM on CentOS last time
>>> I hope Alvaro can answer these question :)
>>>
>>> According to ports
>>> 1) for 5.0 you need to modify server.xml
>>> 2) for 4.0 you need to modify jee-config.xml
>>>
>>> According to devices
>>> You need
>>> 1) HTTPS
>>> 2*) Flash browser plugin for 4.0
>>>
>>> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl.eu
>>> <ma...@quatrekuehl.eu>> wrote:
>>>>
>>>> Hey @all,
>>>>
>>>> what kind of vitrualizing software do you use?
>>>>
>>>> As far as I know is it for OM4 necessary that the cam and headset
>>>> were assigned to the vm and not to the host.
>>>>
>>>> Greetz
>>>>
>>>> Hoschie
>>>>
>>>>
>>>>
>>>>
>>>> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>>>>
>>>>> i have same problem on my ubuntu
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Sansão Machiana
>>>>>
>>>>> *FUNAE - Fundo de Energia*
>>>>>
>>>>> *Unidade de Tecnologias de Informação e Comunicação*
>>>>>
>>>>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>>>>
>>>>> Tel. +258 21 304717/+258 21 304720
>>>>>
>>>>> E-mail: sansaomachiana@funae.co.mz
>>>>> <ma...@funae.co.mz>
>>>>>
>>>>> Maputo - Moçambique
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>> *De:* Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
>>>>> <ma...@legi.grenoble-inp.fr>>
>>>>> *Enviado:* 16 de março de 2020 11:15
>>>>> *Para:* Openmeetings user-list
>>>>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>>>>
>>>>> Hi,
>>>>>
>>>>> I fnaly install openmeetings-4.0.10. The server seams to run fine
>>>>> on the CentOS7 VM. I create my first user and try to connect from
>>>>> outside. IThere is a firewall and only port 80 is open by the lab.
>>>>> So in /opt/red54010/conf/red5.properties i've set http.port=80 and
>>>>> now I can login from home in openmeeting.
>>>>> But when testing the camera and the microphone I only have "select
>>>>> your langage" option ??? see the screen dump attached. My laptop
>>>>> is CentOS7. Is there some additional software to deploy for the
>>>>> clients ?
>>>>>
>>>>> I'm a little bit lost....
>>>>>
>>>>> Thanks for your help
>>>>>
>>>>> Patrick
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>>>>> Hi,
>>>>>>
>>>>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>>>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>>>>
>>>>>> I'm stalled at te step opening the browser on
>>>>>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>>>>
>>>>>> I do not know tomcat at all, I've just changed the starting setup with
>>>>>>
>>>>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>>>>
>>>>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>>>>
>>>>>> Any help appreciated and advices to make openmeeting listening on port
>>>>>> 80 or 443 to finalize the setup.
>>>>>>
>>>>>> Patrick
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>>>>
>>>>> A informação contida neste correio electrónico é confidencial e
>>>>> privilegiada, destinando-se unicamente à pessoa ou entidade acima
>>>>> indicada. Se o leitor desta mensagem não for o seu destinatário,
>>>>> fica pela presente notificado de que qualquer divulgação,
>>>>> distribuição ou reprodução do respectivo conteúdo é expressa e
>>>>> estritamente proibida.
>>>>>
>>>>> The information contained in this e-mail is privileged and
>>>>> confidential and is intended only for the use of the individual or
>>>>> entity named above. If the reader of this message is not the
>>>>> intended recipient, you are hereby notified that any
>>>>> dissemination, distribution or copying of this communication is
>>>>> strictly prohibited.
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>
>>
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
I have installed the live iso OM 5.0.0-M3 Ubuntu 18.04 inVirtualBox,
and works right, login, browsing OpenMeetingsand recording video at
"Conference room" and "Interview room"with cam and mic.So try another
configuration or so...
......................................
El lun, 16-03-2020 a las 17:52 +0100, Patrick Bégou escribió:
> Hi Maxim,
>
>
>
> could provide a link to some tutorial
> to setup openmeeting in https with RTPMS (if i understand it is
> the tunneling part) with self signed certificates ?
> I find documentation saying it works
> "out-of-the-box" (https://openmeetings.apache.org/HTTPS.html)
> or
> some document for 1.9 version and I'm not sure that 4.10 use
> the
> same setup....
>
>
>
> jee-config.xml file is quite complex
> for me, I've tried to comment the first part ("without ssl")
> and
> uncomment the end (removing a comment in the first section as
> recursive comments are not allowed, line 35) but I stay in http
> (netstat -n shows port 80 listening,)
>
>
>
>
>
> Thanks
>
>
>
> Patrick
>
>
>
>
>
> Le 16/03/2020 à 12:48, Maxim Solodovnik
> a écrit :
>
>
>
> >
> > Hello All,
> >
> >
> >
> > It's been looong time I've installed OM on CentOS last time
> > I hope Alvaro can answer these question :)
> >
> >
> >
> > According to ports
> > 1) for 5.0 you need to modify server.xml
> > 2) for 4.0 you need to modify jee-config.xml
> >
> >
> >
> > According to devices
> > You need
> > 1) HTTPS
> > 2*) Flash browser plugin for 4.0
> >
> >
> >
> >
> > On Mon, 16 Mar 2020 at 16:35,
> > Stefan Kühl <st...@quatrekuehl.eu> wrote:
> >
> >
> >
> > >
> > > Hey @all,
> > > what kind of vitrualizing software do you use?
> > > As far as I know is it for OM4 necessary that the cam
> > > and
> > > headset were assigned to the vm and not to the
> > > host.
> > > Greetz
> > > Hoschie
> > >
> > >
> > >
> > >
> > > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > >
> > > >
> > > > i have same problem on my ubuntu
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Sansão
> > > > Machiana
> > > >
> > > >
> > > > FUNAE
> > > > - Fundo de Energia
> > > > Unidade
> > > > de Tecnologias de Informação e
> > > > Comunicação
> > > > R.
> > > > da Imprensa, nº 256 - 6º andar,
> > > > porta 607 -
> > > > 610
> > > > Tel.
> > > > +258 21 304717/+258 21 304720
> > > > E-mail:
> > > > sansaomachiana@funae.co.mz
> > > > Maputo
> > > > - Moçambique
> > > >
> > > >
> > > >
> > > > Por
> > > > favor pense no Meio Ambiente, antes
> > > > de
> > > > imprimir este e-mail
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > De:
> > > > Patrick Bégou <Patrick.Begou@legi.grenobl
> > > > e-inp.fr>
> > > >
> > > > Enviado: 16 de março de 2020
> > > > 11:15
> > > >
> > > > Para: Openmeetings user-list
> > > >
> > > > Assunto: Re: Deploying
> > > > Openmeeting 5 on Centos7
> > > >
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I fnaly install openmeetings-4.0.10. The
> > > > server
> > > > seams to run fine on the CentOS7 VM. I
> > > > create my
> > > > first user and try to connect from
> > > > outside. IThere
> > > > is a firewall and only port 80 is open by
> > > > the lab.
> > > > So in /opt/red54010/conf/red5.properties
> > > > i've set
> > > > http.port=80 and now I can login from
> > > > home in
> > > > openmeeting.
> > > > But when testing the camera and the
> > > > microphone
> > > > I only have "select your langage" option
> > > > ??? see
> > > > the screen dump attached. My laptop is
> > > > CentOS7. Is
> > > > there some additional software to deploy
> > > > for the
> > > > clients ?
> > > >
> > > > I'm a little bit lost....
> > > >
> > > > Thanks for your help
> > > >
> > > > Patrick
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Le 15/03/2020 à 12:02, Patrick Bégou a
> > > > écrit :
> > > >
> > > > > Hi,
> > > > >
> > > > > I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I
> > > > > follow the
> > > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf"
> > > > > document.
> > > > >
> > > > > I'm stalled at te step opening the browser on
> > > > > https://localhost:5443/openmeetings/ as the answer is
> > > > > "HTTP404 not found"
> > > > >
> > > > > I do not know tomcat at all, I've just changed the starting
> > > > > setup with
> > > > >
> > > > > export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
> > > > >
> > > > > to make tomcat listening on IPV4 adresses and "netstat -a"
> > > > > show it is ok.
> > > > >
> > > > > Any help appreciated and advices to make openmeeting
> > > > > listening on port
> > > > > 80 or 443 to finalize the setup.
> > > > >
> > > > > Patrick
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > FUNAE, Fundo De Energia - Disclaimer and
> > > > Confidentiality
> > > > Note
> > > >
> > > >
> > > >
> > > > A informação contida neste correio electrónico
> > > > é
> > > > confidencial e privilegiada, destinando-se
> > > > unicamente à
> > > > pessoa ou entidade acima indicada. Se o leitor
> > > > desta
> > > > mensagem não for o seu destinatário, fica pela
> > > > presente
> > > > notificado de que qualquer divulgação,
> > > > distribuição ou
> > > > reprodução do respectivo conteúdo é expressa e
> > > > estritamente proibida.
> > > >
> > > >
> > > >
> > > > The information contained in this e-mail is
> > > > privileged
> > > > and confidential and is intended only for the
> > > > use of the
> > > > individual or entity named above. If the reader
> > > > of this
> > > > message is not the intended recipient, you are
> > > > hereby
> > > > notified that any dissemination, distribution
> > > > or copying
> > > > of this communication is strictly prohibited.
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > WBR
> >
> > Maxim aka solomax
> >
>
>
>
>
>
>
Re: Deploying Openmeeting 5 on Centos7
Posted by Patrick Bégou <Pa...@legi.grenoble-inp.fr>.
Hi Maxim,
could provide a link to some tutorial to setup openmeeting in https with
RTPMS (if i understand it is the tunneling part) with self signed
certificates ?
I find documentation saying it works "out-of-the-box"
(https://openmeetings.apache.org/HTTPS.html) or some document for 1.9
version and I'm not sure that 4.10 use the same setup....
jee-config.xml file is quite complex for me, I've tried to comment the
first part ("without ssl") and uncomment the end (removing a comment in
the first section as recursive comments are not allowed, line 35) but I
stay in http (netstat -n shows port 80 listening,)
Thanks
Patrick
Le 16/03/2020 à 12:48, Maxim Solodovnik a écrit :
> Hello All,
>
> It's been looong time I've installed OM on CentOS last time
> I hope Alvaro can answer these question :)
>
> According to ports
> 1) for 5.0 you need to modify server.xml
> 2) for 4.0 you need to modify jee-config.xml
>
> According to devices
> You need
> 1) HTTPS
> 2*) Flash browser plugin for 4.0
>
> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <stefan@quatrekuehl.eu
> <ma...@quatrekuehl.eu>> wrote:
>
> Hey @all,
>
> what kind of vitrualizing software do you use?
>
> As far as I know is it for OM4 necessary that the cam and headset
> were assigned to the vm and not to the host.
>
> Greetz
>
> Hoschie
>
>
>
>
> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>
>> i have same problem on my ubuntu
>>
>>
>>
>>
>>
>>
>>
>> Sansão Machiana
>>
>> *FUNAE - Fundo de Energia*
>>
>> *Unidade de Tecnologias de Informação e Comunicação*
>>
>> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>>
>> Tel. +258 21 304717/+258 21 304720
>>
>> E-mail: sansaomachiana@funae.co.mz
>> <ma...@funae.co.mz>
>>
>> Maputo - Moçambique
>>
>>
>>
>>
>>
>> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>>
>> ------------------------------------------------------------------------
>> *De:* Patrick Bégou <Patrick.Begou@legi.grenoble-inp.fr
>> <ma...@legi.grenoble-inp.fr>>
>> *Enviado:* 16 de março de 2020 11:15
>> *Para:* Openmeetings user-list
>> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>>
>> Hi,
>>
>> I fnaly install openmeetings-4.0.10. The server seams to run fine
>> on the CentOS7 VM. I create my first user and try to connect from
>> outside. IThere is a firewall and only port 80 is open by the
>> lab. So in /opt/red54010/conf/red5.properties i've set
>> http.port=80 and now I can login from home in openmeeting.
>> But when testing the camera and the microphone I only have
>> "select your langage" option ??? see the screen dump attached.
>> My laptop is CentOS7. Is there some additional software to deploy
>> for the clients ?
>>
>> I'm a little bit lost....
>>
>> Thanks for your help
>>
>> Patrick
>>
>>
>>
>>
>> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>>> Hi,
>>>
>>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>>
>>> I'm stalled at te step opening the browser on
>>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>>
>>> I do not know tomcat at all, I've just changed the starting setup with
>>>
>>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>>
>>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>>
>>> Any help appreciated and advices to make openmeeting listening on port
>>> 80 or 443 to finalize the setup.
>>>
>>> Patrick
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>>
>> A informação contida neste correio electrónico é confidencial e
>> privilegiada, destinando-se unicamente à pessoa ou entidade acima
>> indicada. Se o leitor desta mensagem não for o seu destinatário,
>> fica pela presente notificado de que qualquer divulgação,
>> distribuição ou reprodução do respectivo conteúdo é expressa e
>> estritamente proibida.
>>
>> The information contained in this e-mail is privileged and
>> confidential and is intended only for the use of the individual
>> or entity named above. If the reader of this message is not the
>> intended recipient, you are hereby notified that any
>> dissemination, distribution or copying of this communication is
>> strictly prohibited.
>
>
>
> --
> WBR
> Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Alvaro <zu...@gmail.com>.
Right now i've finished to make new a fresh installation ofOM 500-M3 on
Centos 7, after read your question, in physicalhard drive partition,
and everything is goeing right followingthe tutorial.
Your problem, Patrick, must be relate with ports and virtualmachine.
....................
El lun, 16-03-2020 a las 18:48 +0700, Maxim Solodovnik escribió:
> Hello All,
> It's been looong time I've installed OM on CentOS last time
> I hope Alvaro can answer these question :)
>
> According to ports
> 1) for 5.0 you need to modify server.xml
> 2) for 4.0 you need to modify jee-config.xml
>
> According to devices
> You need
> 1) HTTPS
> 2*) Flash browser plugin for 4.0
> On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <st...@quatrekuehl.eu>
> wrote:
> > Hey @all,
> > what kind of vitrualizing software do you use?
> > As far as I know is it for OM4 necessary that the cam and headset
> > were assigned to the vm and not to the host.
> > Greetz
> > Hoschie
> >
> >
> >
> > Am 16.03.2020 10:46, schrieb Sansao Machiana:
> > >
> > >
> > > i have same problem on my ubuntu
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Sansão Machiana
> > >
> > > FUNAE - Fundo de Energia
> > > Unidade de Tecnologias de Informação e Comunicação
> > > R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
> > > Tel. +258 21 304717/+258 21 304720
> > > E-mail: sansaomachiana@funae.co.mz
> > > Maputo - Moçambique
> > >
> > >
> > > Por favor pense no Meio Ambiente, antes de imprimir este e-mail
> > >
> > >
> > >
> > >
> > >
> > > De: Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> > > Enviado: 16 de março de 2020 11:15
> > > Para: Openmeetings user-list
> > > Assunto: Re: Deploying Openmeeting 5 on Centos7
> > >
> > >
> > >
> > > Hi,
> > >
> > > I fnaly install openmeetings-4.0.10. The server seams to run fine
> > > on the CentOS7 VM. I create my first user and try to connect from
> > > outside. IThere is a firewall and only port 80 is open by the
> > > lab. So in /opt/red54010/conf/red5.properties i've set
> > > http.port=80 and now I can login from home in openmeeting.
> > > But when testing the camera and the microphone I only have
> > > "select your langage" option ??? see the screen dump attached.
> > > My laptop is CentOS7. Is there some additional software to deploy
> > > for the clients ?
> > >
> > > I'm a little bit lost....
> > >
> > > Thanks for your help
> > >
> > > Patrick
> > >
> > >
> > >
> > >
> > >
> > > Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
> > > > Hi,
> > > >
> > > > I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I
> > > > follow the
> > > > "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
> > > >
> > > > I'm stalled at te step opening the browser on
> > > > https://localhost:5443/openmeetings/ as the answer is "HTTP404
> > > > not found"
> > > >
> > > > I do not know tomcat at all, I've just changed the starting
> > > > setup with
> > > >
> > > > export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
> > > >
> > > > to make tomcat listening on IPV4 adresses and "netstat -a" show
> > > > it is ok.
> > > >
> > > > Any help appreciated and advices to make openmeeting listening
> > > > on port
> > > > 80 or 443 to finalize the setup.
> > > >
> > > > Patrick
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
> > >
> > > A informação contida neste correio electrónico é confidencial e
> > > privilegiada, destinando-se unicamente à pessoa ou entidade acima
> > > indicada. Se o leitor desta mensagem não for o seu destinatário,
> > > fica pela presente notificado de que qualquer divulgação,
> > > distribuição ou reprodução do respectivo conteúdo é expressa e
> > > estritamente proibida.
> > >
> > > The information contained in this e-mail is privileged and
> > > confidential and is intended only for the use of the individual
> > > or entity named above. If the reader of this message is not the
> > > intended recipient, you are hereby notified that any
> > > dissemination, distribution or copying of this communication is
> > > strictly prohibited.
> > >
> >
> >
>
> --
> WBR
> Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Maxim Solodovnik <so...@gmail.com>.
Hello All,
It's been looong time I've installed OM on CentOS last time
I hope Alvaro can answer these question :)
According to ports
1) for 5.0 you need to modify server.xml
2) for 4.0 you need to modify jee-config.xml
According to devices
You need
1) HTTPS
2*) Flash browser plugin for 4.0
On Mon, 16 Mar 2020 at 16:35, Stefan Kühl <st...@quatrekuehl.eu> wrote:
> Hey @all,
>
> what kind of vitrualizing software do you use?
>
> As far as I know is it for OM4 necessary that the cam and headset were
> assigned to the vm and not to the host.
>
> Greetz
>
> Hoschie
>
>
>
> Am 16.03.2020 10:46, schrieb Sansao Machiana:
>
> i have same problem on my ubuntu
>
>
>
>
>
>
> Sansão Machiana
>
> *FUNAE - Fundo de Energia*
>
> *Unidade de Tecnologias de Informação e Comunicação*
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
>
> Maputo - Moçambique
>
>
>
>
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
> ------------------------------
> *De:* Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> *Enviado:* 16 de março de 2020 11:15
> *Para:* Openmeetings user-list
> *Assunto:* Re: Deploying Openmeeting 5 on Centos7
>
> Hi,
>
> I fnaly install openmeetings-4.0.10. The server seams to run fine on the
> CentOS7 VM. I create my first user and try to connect from outside. IThere
> is a firewall and only port 80 is open by the lab. So in
> /opt/red54010/conf/red5.properties i've set http.port=80 and now I can
> login from home in openmeeting.
> But when testing the camera and the microphone I only have "select your
> langage" option ??? see the screen dump attached. My laptop is CentOS7. Is
> there some additional software to deploy for the clients ?
>
> I'm a little bit lost....
>
> Thanks for your help
>
> Patrick
>
>
>
>
> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>
> Hi,
>
> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>
> I'm stalled at te step opening the browser onhttps://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>
> I do not know tomcat at all, I've just changed the starting setup with
>
> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>
> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>
> Any help appreciated and advices to make openmeeting listening on port
> 80 or 443 to finalize the setup.
>
> Patrick
>
>
>
>
>
> ------------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e
> privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada.
> Se o leitor desta mensagem não for o seu destinatário, fica pela presente
> notificado de que qualquer divulgação, distribuição ou reprodução do
> respectivo conteúdo é expressa e estritamente proibida.
>
> The information contained in this e-mail is privileged and confidential
> and is intended only for the use of the individual or entity named above.
> If the reader of this message is not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this
> communication is strictly prohibited.
>
>
--
WBR
Maxim aka solomax
Re: Deploying Openmeeting 5 on Centos7
Posted by Stefan Kühl <st...@quatrekuehl.eu>.
Hey @all,
what kind of vitrualizing software do you use?
As far as I know is it for OM4 necessary that the cam and headset were
assigned to the vm and not to the host.
Greetz
Hoschie
Am 16.03.2020 10:46, schrieb Sansao Machiana:
> i have same problem on my ubuntu
>
> Sansão Machiana
>
> FUNAE - FUNDO DE ENERGIA
>
> UNIDADE DE TECNOLOGIAS DE INFORMAÇÃO E COMUNICAÇÃO
>
> R. da Imprensa, nº 256 - 6º andar, porta 607 - 610
>
> Tel. +258 21 304717/+258 21 304720
>
> E-mail: sansaomachiana@funae.co.mz
>
> Maputo - Moçambique
>
> Por favor pense no Meio Ambiente, antes de imprimir este e-mail
>
> -------------------------
>
> DE: Patrick Bégou <Pa...@legi.grenoble-inp.fr>
> ENVIADO: 16 de março de 2020 11:15
> PARA: Openmeetings user-list
> ASSUNTO: Re: Deploying Openmeeting 5 on Centos7
>
> Hi,
>
> I fnaly install openmeetings-4.0.10. The server seams to run fine on the CentOS7 VM. I create my first user and try to connect from outside. IThere is a firewall and only port 80 is open by the lab. So in /opt/red54010/conf/red5.properties i've set http.port=80 and now I can login from home in openmeeting.
> But when testing the camera and the microphone I only have "select your langage" option ??? see the screen dump attached. My laptop is CentOS7. Is there some additional software to deploy for the clients ?
>
> I'm a little bit lost....
>
> Thanks for your help
>
> Patrick
>
> Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
>
>> Hi,
>>
>> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
>> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>>
>> I'm stalled at te step opening the browser on
>> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>>
>> I do not know tomcat at all, I've just changed the starting setup with
>>
>> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>>
>> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>>
>> Any help appreciated and advices to make openmeeting listening on port
>> 80 or 443 to finalize the setup.
>>
>> Patrick
>
> -------------------------
>
> FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
>
> A informação contida neste correio electrónico é confidencial e privilegiada, destinando-se unicamente à pessoa ou entidade acima indicada. Se o leitor desta mensagem não for o seu destinatário, fica pela presente notificado de que qualquer divulgação, distribuição ou reprodução do respectivo conteúdo é expressa e estritamente proibida.
>
> The information contained in this e-mail is privileged and confidential and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
RE: Deploying Openmeeting 5 on Centos7
Posted by Sansao Machiana <sa...@funae.co.mz>.
i have same problem on my ubuntu
[X]
Sans?o Machiana
FUNAE - Fundo de Energia
Unidade de Tecnologias de Informa??o e Comunica??o
R. da Imprensa, n? 256 - 6? andar, porta 607 - 610
Tel. +258 21 304717/+258 21 304720
E-mail: sansaomachiana@funae.co.mz
Maputo - Mo?ambique
Por favor pense no Meio Ambiente, antes de imprimir este e-mail
________________________________
De: Patrick B?gou <Pa...@legi.grenoble-inp.fr>
Enviado: 16 de mar?o de 2020 11:15
Para: Openmeetings user-list
Assunto: Re: Deploying Openmeeting 5 on Centos7
Hi,
I fnaly install openmeetings-4.0.10. The server seams to run fine on the CentOS7 VM. I create my first user and try to connect from outside. IThere is a firewall and only port 80 is open by the lab. So in /opt/red54010/conf/red5.properties i've set http.port=80 and now I can login from home in openmeeting.
But when testing the camera and the microphone I only have "select your langage" option ??? see the screen dump attached. My laptop is CentOS7. Is there some additional software to deploy for the clients ?
I'm a little bit lost....
Thanks for your help
Patrick
[cid:part1.F00FD02B.6830F371@legi.grenoble-inp.fr]
Le 15/03/2020 ? 12:02, Patrick B?gou a ?crit :
Hi,
I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
"Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
I'm stalled at te step opening the browser on
https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
I do not know tomcat at all, I've just changed the starting setup with
export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
Any help appreciated and advices to make openmeeting listening on port
80 or 443 to finalize the setup.
Patrick
________________________________
FUNAE, Fundo De Energia - Disclaimer and Confidentiality Note
A informa??o contida neste correio electr?nico ? confidencial e privilegiada, destinando-se unicamente ? pessoa ou entidade acima indicada. Se o leitor desta mensagem n?o for o seu destinat?rio, fica pela presente notificado de que qualquer divulga??o, distribui??o ou reprodu??o do respectivo conte?do ? expressa e estritamente proibida.
The information contained in this e-mail is privileged and confidential and is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
Re: Deploying Openmeeting 5 on Centos7
Posted by Patrick Bégou <Pa...@legi.grenoble-inp.fr>.
Hi,
I fnaly install openmeetings-4.0.10. The server seams to run fine on the
CentOS7 VM. I create my first user and try to connect from outside.
IThere is a firewall and only port 80 is open by the lab. So in
/opt/red54010/conf/red5.properties i've set http.port=80 and now I can
login from home in openmeeting.
But when testing the camera and the microphone I only have "select your
langage" option ??? see the screen dump attached. My laptop is CentOS7.
Is there some additional software to deploy for the clients ?
I'm a little bit lost....
Thanks for your help
Patrick
Le 15/03/2020 à 12:02, Patrick Bégou a écrit :
> Hi,
>
> I'm deploying Openmeetings on a CentOS7 VM in proxmoxVE. I follow the
> "Installation OpenMeetings 5.0.0-M3 on Centos 7.pdf" document.
>
> I'm stalled at te step opening the browser on
> https://localhost:5443/openmeetings/ as the answer is "HTTP404 not found"
>
> I do not know tomcat at all, I've just changed the starting setup with
>
> export CATALINA_OPTS="-Djava.net.preferIPV4Stack=true"
>
> to make tomcat listening on IPV4 adresses and "netstat -a" show it is ok.
>
> Any help appreciated and advices to make openmeeting listening on port
> 80 or 443 to finalize the setup.
>
> Patrick
>
>