You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@syncope.apache.org by Aniket Rohra <AR...@TechMahindra.com> on 2016/12/21 07:38:55 UTC

Issue with Standalone # csv bundle

Hello

We have downloaded the standalone version of apache syncope 2.0.1 version for evaluation purpose . In that standalone version when we are running the Pull tasks we are not getting any data . It shows 0 users/groups . When we are trying to push / pull to LDAP It is working fine .

We are unable to perform any pull operation using scycope.  Can someone helps us way out pls .

Thanks
Aniket Rohra
0091-9323887780


============================================================================================================================
Disclaimer:  This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at http://www.techmahindra.com/Disclaimer.html externally http://tim.techmahindra.com/tim/disclaimer.html internally within TechMahindra.
============================================================================================================================


RE: Issue with Standalone # csv bundle

Posted by Aniket Rohra <AR...@TechMahindra.com>.
Hello

It is working now . Maybe some issue with the csv .

Thanks for all the help


From: Francesco Chicchiriccò [mailto:ilgrosso@apache.org]
Sent: Thursday, December 22, 2016 1:15 PM
To: user@syncope.apache.org
Subject: Re: Issue with Standalone # csv bundle

Hi Aniket,
to be sure, either unzip again the standalone distribution or grab

https://raw.githubusercontent.com/apache/syncope/syncope-2.0.1/fit/core-reference/src/test/resources/test.csv

and replace

syncope-standalone-2.0.1/apache-tomcat-8.5.6/test-csvdir/test.csv

HTH
Regards.

On 21/12/2016 12:30, Matteo Di Carlo wrote:
On 21/12/2016 11:37, Aniket Rohra wrote:

Hello

Thanks for replying

I have downloaded 2.0.1 standalone version .

I am trying the same below steps still I don’t see any entries of users being created . In the view section it is showing as SUCCESS however when I further see it says

Users ( created / failures ) : 0/0 ( updated/ failures ) : 0/0 ( deleted /failures ) :0/0 ( no operation / ignored ) : 0/0

Also I have tried other connector resource – ldap , both Pull and Push task and it is running successfully and I can see users getting created in LDAP .

Issue is with csv connector . I have attached the core-connid.log .

Also I have not made any changes in the standalone environment . Its just the uncompress zip file which I am running .

Thanks
Aniket Rohra


Hi Aniket,
I would like to ask you to answer directly to the mailing list, since others could be interested to this discussion.

Anyway, that is not a issue about csv connector.
I suggest to start Syncope again, then execute the specific task I mentioned:

CSV Task (update matching; provision unmatching).

the result status should be:



Users [created/failures]: 10/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0





Users created:

CREATE SUCCESS (key/name): 2bb3a7e0-6833-4733-b3a7-e0683337330d/test0

CREATE SUCCESS (key/name): 2657ed6a-148f-4d83-97ed-6a148f9d8353/test1

[...]

Matteo.



From: Matteo Di Carlo [mailto:matteo.dicarlo@tirasa.net]
Sent: Wednesday, December 21, 2016 3:20 PM
To: user@syncope.apache.org<ma...@syncope.apache.org>
Subject: Re: Issue with Standalone # csv bundle

On 21/12/2016 10:42, Matteo Di Carlo wrote:

On 21/12/2016 08:38, Aniket Rohra wrote:

Hello

We have downloaded the standalone version of apache syncope 2.0.1 version for evaluation purpose . In that standalone version when we are running the Pull tasks we are not getting any data . It shows 0 users/groups . When we are trying to push / pull to LDAP It is working fine .

We are unable to perform any pull operation using scycope.  Can someone helps us way out pls .

Thanks
Aniket Rohra
0091-9323887780
________________________________
============================================================================================================================
Disclaimer: This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at http://www.techmahindra.com/Disclaimer.html externally http://tim.techmahindra.com/tim/disclaimer.html internally within TechMahindra.
============================================================================================================================


Hi Aniket,
I have tried to reproduce the error, I went through the following steps:

1. In topology I selected resource-csv,
2. in Pull tasks panel I executed one of the CSV Tasks listed (execute->run)
3. I can see now, through the view icon, both executions and result status data, and 10 entries of Users created.

It seems it works fine, are you sure you are running tasks in the right way?
Have you checked logs?

Hi Aniket,
Could you try to run CSV Task (update matching; provision unmatching)?
thanks.
Matteo.

--

Francesco Chicchiriccò



Tirasa - Open Source Excellence

http://www.tirasa.net/



Member at The Apache Software Foundation

Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail

http://home.apache.org/~ilgrosso/


============================================================================================================================
Disclaimer:  This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at http://www.techmahindra.com/Disclaimer.html externally http://tim.techmahindra.com/tim/disclaimer.html internally within TechMahindra.
============================================================================================================================


Re: Issue with Standalone # csv bundle

Posted by Francesco Chicchiriccò <il...@apache.org>.
Hi Aniket,
to be sure, either unzip again the standalone distribution or grab

https://raw.githubusercontent.com/apache/syncope/syncope-2.0.1/fit/core-reference/src/test/resources/test.csv

and replace

syncope-standalone-2.0.1/apache-tomcat-8.5.6/test-csvdir/test.csv

HTH
Regards.

On 21/12/2016 12:30, Matteo Di Carlo wrote:
> On 21/12/2016 11:37, Aniket Rohra wrote:
>>
>> Hello
>>
>> Thanks for replying
>>
>> I have downloaded 2.0.1 standalone version .
>>
>> I am trying the same below steps still I don\u2019t see any entries of 
>> users being created . In the view section it is showing as SUCCESS 
>> however when I further see it says
>>
>> Users ( created / failures ) : 0/0 ( updated/ failures ) : 0/0 ( 
>> deleted /failures ) :0/0 ( no operation / ignored ) : 0/0
>>
>> Also I have tried other connector resource \u2013 ldap , both Pull and 
>> Push task and it is running successfully and I can see users getting 
>> created in LDAP .
>>
>> Issue is with csv connector . I have attached the core-connid.log .
>>
>> Also I have not made any changes in the standalone environment . Its 
>> just the uncompress zip file which I am running .
>>
>> Thanks
>>
>> Aniket Rohra
>>
>
> Hi Aniket,
> I would like to ask you to answer directly to the mailing list, since 
> others could be interested to this discussion.
>
> Anyway, that is not a issue about csv connector.
> I suggest to start Syncope again, then execute the specific task I 
> mentioned:
>
> CSV Task (update matching; provision unmatching).
>
> the result status should be:
>
> Users [created/failures]: 10/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0
>
>
> Users created:
> CREATE SUCCESS (key/name): 2bb3a7e0-6833-4733-b3a7-e0683337330d/test0
> CREATE SUCCESS (key/name): 2657ed6a-148f-4d83-97ed-6a148f9d8353/test1
> [...]
>
> Matteo.
>
>> *From:*Matteo Di Carlo [mailto:matteo.dicarlo@tirasa.net]
>> *Sent:* Wednesday, December 21, 2016 3:20 PM
>> *To:* user@syncope.apache.org
>> *Subject:* Re: Issue with Standalone # csv bundle
>>
>> On 21/12/2016 10:42, Matteo Di Carlo wrote:
>>
>>     On 21/12/2016 08:38, Aniket Rohra wrote:
>>
>>         Hello
>>
>>         We have downloaded the standalone version of apache syncope
>>         2.0.1 version for evaluation purpose . In that standalone
>>         version when we are running the Pull tasks we are not getting
>>         any data . It shows 0 users/groups . When we are trying to
>>         push / pull to LDAP It is working fine .
>>
>>         We are unable to perform any pull operation using scycope.
>>          Can someone helps us way out pls .
>>
>>         Thanks
>>
>>         Aniket Rohra
>>
>>         0091-9323887780
>>
>>         ------------------------------------------------------------------------
>>
>>         ============================================================================================================================
>>         Disclaimer: This message and the information contained herein
>>         is proprietary and confidential and subject to the Tech
>>         Mahindra policy statement, you may review the policy at
>>         http://www.techmahindra.com/Disclaimer.html externally
>>         http://tim.techmahindra.com/tim/disclaimer.html internally
>>         within TechMahindra.
>>         ============================================================================================================================
>>
>>
>>
>>     Hi Aniket,
>>     I have tried to reproduce the error, I went through the following
>>     steps:
>>
>>     1. In topology I selected resource-csv,
>>     2. in Pull tasks panel I executed one of the CSV Tasks listed
>>     (execute->run)
>>     3. I can see now, through the view icon, both executions and
>>     result status data, and 10 entries of Users created.
>>
>>     It seems it works fine, are you sure you are running tasks in the
>>     right way?
>>     Have you checked logs?
>>
>>
>> Hi Aniket,
>> Could you try to run CSV Task (update matching; provision unmatching)?
>> thanks.
>> Matteo.
>>
-- 
Francesco Chicchiricc�

Tirasa - Open Source Excellence
http://www.tirasa.net/

Member at The Apache Software Foundation
Syncope, Cocoon, Olingo, CXF, OpenJPA, PonyMail
http://home.apache.org/~ilgrosso/


Re: Issue with Standalone # csv bundle

Posted by Matteo Di Carlo <ma...@tirasa.net>.

On 21/12/2016 11:37, Aniket Rohra wrote:
>
> Hello
>
> Thanks for replying
>
> I have downloaded 2.0.1 standalone version .
>
> I am trying the same below steps still I don’t see any entries of 
> users being created . In the view section it is showing as SUCCESS 
> however when I further see it says
>
> Users ( created / failures ) : 0/0 ( updated/ failures ) : 0/0 ( 
> deleted /failures ) :0/0 ( no operation / ignored ) : 0/0
>
> Also I have tried other connector resource – ldap , both Pull and Push 
> task and it is running successfully and I can see users getting 
> created in LDAP .
>
> Issue is with csv connector . I have attached the core-connid.log .
>
> Also I have not made any changes in the standalone environment . Its 
> just the uncompress zip file which I am running .
>
> Thanks
>
> Aniket Rohra
>
Hi Aniket,
I would like to ask you to answer directly to the mailing list, since 
others could be interested to this discussion.

Anyway, that is not a issue about csv connector.
I suggest to start Syncope again, then execute the specific task I 
mentioned:

CSV Task (update matching; provision unmatching).

the result status should be:

Users [created/failures]: 10/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0


Users created:
CREATE SUCCESS (key/name): 2bb3a7e0-6833-4733-b3a7-e0683337330d/test0
CREATE SUCCESS (key/name): 2657ed6a-148f-4d83-97ed-6a148f9d8353/test1
[...]


Matteo.







> *From:*Matteo Di Carlo [mailto:matteo.dicarlo@tirasa.net]
> *Sent:* Wednesday, December 21, 2016 3:20 PM
> *To:* user@syncope.apache.org
> *Subject:* Re: Issue with Standalone # csv bundle
>
> On 21/12/2016 10:42, Matteo Di Carlo wrote:
>
>     On 21/12/2016 08:38, Aniket Rohra wrote:
>
>         Hello
>
>         We have downloaded the standalone version of apache syncope
>         2.0.1 version for evaluation purpose . In that standalone
>         version when we are running the Pull tasks we are not getting
>         any data . It shows 0 users/groups . When we are trying to
>         push / pull to LDAP It is working fine .
>
>         We are unable to perform any pull operation using scycope.
>          Can someone helps us way out pls .
>
>         Thanks
>
>         Aniket Rohra
>
>         0091-9323887780
>
>         ------------------------------------------------------------------------
>
>         ============================================================================================================================
>         Disclaimer: This message and the information contained herein
>         is proprietary and confidential and subject to the Tech
>         Mahindra policy statement, you may review the policy at
>         http://www.techmahindra.com/Disclaimer.html externally
>         http://tim.techmahindra.com/tim/disclaimer.html internally
>         within TechMahindra.
>         ============================================================================================================================
>
>
>
>     Hi Aniket,
>     I have tried to reproduce the error, I went through the following
>     steps:
>
>     1. In topology I selected resource-csv,
>     2. in Pull tasks panel I executed one of the CSV Tasks listed
>     (execute->run)
>     3. I can see now, through the view icon, both executions and
>     result status data, and 10 entries of Users created.
>
>     It seems it works fine, are you sure you are running tasks in the
>     right way?
>     Have you checked logs?
>
>
> Hi Aniket,
> Could you try to run CSV Task (update matching; provision unmatching)?
> thanks.
> Matteo.
>
> ------------------------------------------------------------------------
> ============================================================================================================================
> Disclaimer: This message and the information contained herein is 
> proprietary and confidential and subject to the Tech Mahindra policy 
> statement, you may review the policy at 
> http://www.techmahindra.com/Disclaimer.html externally 
> http://tim.techmahindra.com/tim/disclaimer.html internally within 
> TechMahindra.
> ============================================================================================================================


Re: Issue with Standalone # csv bundle

Posted by Matteo Di Carlo <ma...@tirasa.net>.

On 21/12/2016 10:42, Matteo Di Carlo wrote:
>
>
> On 21/12/2016 08:38, Aniket Rohra wrote:
>>
>> Hello
>>
>> We have downloaded the standalone version of apache syncope 2.0.1 
>> version for evaluation purpose . In that standalone version when we 
>> are running the Pull tasks we are not getting any data . It shows 0 
>> users/groups . When we are trying to push / pull to LDAP It is 
>> working fine .
>>
>> We are unable to perform any pull operation using scycope.  Can 
>> someone helps us way out pls .
>>
>> Thanks
>>
>> Aniket Rohra
>>
>> 0091-9323887780
>>
>> ------------------------------------------------------------------------
>> ============================================================================================================================
>> Disclaimer: This message and the information contained herein is 
>> proprietary and confidential and subject to the Tech Mahindra policy 
>> statement, you may review the policy at 
>> http://www.techmahindra.com/Disclaimer.html externally 
>> http://tim.techmahindra.com/tim/disclaimer.html internally within 
>> TechMahindra.
>> ============================================================================================================================
>
>
> Hi Aniket,
> I have tried to reproduce the error, I went through the following steps:
>
> 1. In topology I selected resource-csv,
> 2. in Pull tasks panel I executed one of the CSV Tasks listed 
> (execute->run)
> 3. I can see now, through the view icon, both executions and result 
> status data, and 10 entries of Users created.
>
> It seems it works fine, are you sure you are running tasks in the 
> right way?
> Have you checked logs?
>

Hi Aniket,
Could you try to run CSV Task (update matching; provision unmatching)?
thanks.
Matteo.

Re: Issue with Standalone # csv bundle

Posted by Matteo Di Carlo <ma...@tirasa.net>.

On 21/12/2016 08:38, Aniket Rohra wrote:
>
> Hello
>
> We have downloaded the standalone version of apache syncope 2.0.1 
> version for evaluation purpose . In that standalone version when we 
> are running the Pull tasks we are not getting any data . It shows 0 
> users/groups . When we are trying to push / pull to LDAP It is working 
> fine .
>
> We are unable to perform any pull operation using scycope.  Can 
> someone helps us way out pls .
>
> Thanks
>
> Aniket Rohra
>
> 0091-9323887780
>
> ------------------------------------------------------------------------
> ============================================================================================================================
> Disclaimer: This message and the information contained herein is 
> proprietary and confidential and subject to the Tech Mahindra policy 
> statement, you may review the policy at 
> http://www.techmahindra.com/Disclaimer.html externally 
> http://tim.techmahindra.com/tim/disclaimer.html internally within 
> TechMahindra.
> ============================================================================================================================


Hi Aniket,
I have tried to reproduce the error, I went through the following steps:

1. In topology I selected resource-csv,
2. in Pull tasks panel I executed one of the CSV Tasks listed (execute->run)
3. I can see now, through the view icon, both executions and result 
status data, and 10 entries of Users created.

It seems it works fine, are you sure you are running tasks in the right way?
Have you checked logs?