[GitHub] mintisan opened a new issue #1287: blinky demo for STM32F4-Discovery not works on STM32F429I-Discovery

[GitBox <gi...@apache.org>]

mintisan opened a new issue #1287: blinky demo for STM32F4-Discovery not works on STM32F429I-Discovery
URL: https://github.com/apache/mynewt-core/issues/1287
 
 
   I followed the steps on [Blinky, your “Hello World!”, on STM32F4-Discovery](https://mynewt.apache.org/latest/tutorials/blinky/blinky_stm32f4disc.html).
   
   And every step's result looks fine.
   
   But doesn't work at all, even I try to reset the board.
   
   I also tried to flash the binary directly with command below:
   ```
   st-flash write /Users/linjinhui/Github/mynewt/blinking/bin/targets/stm32f4disc_blinky/app/apps/blinky/blinky.elf.bin 0x8000000
   ```
   
   But I can blink the leds with mbed demo or STM32Cube via `st-link`. 
   
   So the hardware is OK.
   
   Versions:
   - Apache Newt version: 1.4.1
   - masOS 10.11.6
   - Open On-Chip Debugger 0.10.0
   -  st-flash --version v1.4.0
   - arm-none-eabi-gcc (GNU Tools for Arm Embedded Processors 7-2017-q4-major) 7.2.1 20170904 (release) [ARM/embedded-7-branch revision 255204]
   
   
   Do I skip any important steps?
   
   

----------------------------------------------------------------
This is an automated message from the Apache Git Service.
To respond to the message, please log on GitHub and use the
URL above to go to the specific comment.
 
For queries about this service, please contact Infrastructure at:
users@infra.apache.org


With regards,
Apache Git Services