You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@qpid.apache.org by jr...@apache.org on 2016/09/06 17:00:06 UTC
[43/51] [partial] qpid-site git commit: QPID-7353: Update for the
Qpid C++ 1.35.0 release
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
new file mode 100644
index 0000000..7297dbe
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
@@ -0,0 +1,251 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements. See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership. The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License. You may obtain a copy of the License at
+ -
+ - http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied. See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+ <head>
+ <title>AMQP Messaging Broker (Implemented in C++) - Apache Qpid™</title>
+ <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+ <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+ <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+ <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+ <script type="text/javascript">var _deferredFunctions = [];</script>
+ <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+ <!--[if lte IE 8]>
+ <link rel="stylesheet" href="/ie.css" type="text/css"/>
+ <script type="text/javascript" src="/html5shiv.js"></script>
+ <![endif]-->
+
+ <!-- Redirects for `go get` and godoc.org -->
+ <meta name="go-import"
+ content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+ <meta name="go-source"
+ content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+ </head>
+ <body>
+ <div id="-content">
+ <div id="-top" class="panel">
+ <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+ <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+ <ul id="-global-navigation">
+ <li><a id="-logotype" href="/index.html">Apache Qpid<sup>™</sup></a></li>
+ <li><a href="/documentation.html">Documentation</a></li>
+ <li><a href="/download.html">Download</a></li>
+ <li><a href="/discussion.html">Discussion</a></li>
+ </ul>
+ </div>
+
+ <div id="-menu" class="panel" style="display: none;">
+ <div class="flex">
+ <section>
+ <h3>Project</h3>
+
+ <ul>
+ <li><a href="/overview.html">Overview</a></li>
+ <li><a href="/components/index.html">Components</a></li>
+ <li><a href="/releases/index.html">Releases</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Messaging APIs</h3>
+
+ <ul>
+ <li><a href="/proton/index.html">Qpid Proton</a></li>
+ <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+ <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Servers and tools</h3>
+
+ <ul>
+ <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+ <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+ <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Resources</h3>
+
+ <ul>
+ <li><a href="/dashboard.html">Dashboard</a></li>
+ <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+ <li><a href="/resources.html">More resources</a></li>
+ </ul>
+ </section>
+ </div>
+ </div>
+
+ <div id="-search" class="panel" style="display: none;">
+ <form action="http://www.google.com/search" method="get">
+ <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+ <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+ <button type="submit">Search</button>
+ <a href="/search.html">More ways to search</a>
+ </form>
+ </div>
+
+ <div id="-middle" class="panel">
+ <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li>AMQP Messaging Broker (Implemented in C++)</li></ul>
+
+ <div id="-middle-content">
+ <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">AMQP Messaging Broker (Implemented in C++)</th></tr><tr><td align="left" width="20%"> </td><th align="center" width="60%"> </th><td align="right" width="20%"> <a accesskey="n" href="pr01.html">Next</a></td></tr></table><hr /></div><div class="book"><div class="titlepage"><div><div><h1 class="title"><a id="idm140173367409168"></a>AMQP Messaging Broker (Implemented in C++)</h1></div></div><hr /></div><div class="toc"><p><strong>Table of Contents</strong></p><dl class="toc"><dt><span class="preface"><a href="pr01.html">Introduction</a></span></dt><dt><span class="chapter"><a href="ch01.html">1.
+ Running the AMQP Messaging Broker
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch01.html#section-Running-a-Qpid-CPP-Broker">1.1.
+ Running a Qpid C++ Broker
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch01.html#RASC-BuildingtheCppBrokerandClientLibraries">1.1.1.
+ Building the
+ C++ Broker and Client Libraries
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-RunningtheCppBroker">1.1.2.
+ Running the C++ Broker
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Mostcommonquestionsgettingqpiddrunning">1.1.3.
+ Most
+ common questions getting qpidd running
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Authentication">1.1.4.
+ Authentication
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Slightlymorecomplexconfiguration">1.1.5.
+ Slightly more
+ complex configuration
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Loadingextramodules">1.1.6.
+ Loading extra modules
+ </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-message-timestamps">1.1.7. Timestamping Received Messages</a></span></dt><dt><span class="section"><a href="ch01.html#RASC-logging-options">1.1.8. Logging Options</a></span></dt></dl></dd><dt><span class="section"><a href="ch01s02.html">1.2.
+ Cheat Sheet for configuring Queue Options
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch01s02.html#CheatSheetforconfiguringQueueOptions-ConfiguringQueueOptions">1.2.1.
+ Configuring
+ Queue Options
+ </a></span></dt></dl></dd><dt><span class="section"><a href="ch01s03.html">1.3.
+ Cheat Sheet for configuring Exchange Options
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch01s03.html#CheatSheetforconfiguringExchangeOptions-ConfiguringExchangeOptions">1.3.1.
+ Configuring Exchange Options
+ </a></span></dt></dl></dd><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html">1.4. Broker Federation</a></span></dt><dd><dl><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Message_Routes">1.4.1. Message Routes</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Federation_Topologies">1.4.2. Federation Topologies</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Federation_among_High_Availability_Message_Clusters">1.4.3. Federation among High Availability Message Clusters</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-The_qpid_route_Utility">1.4.4. The qpid-route Utility</a></span></dt><dt><spa
n class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#federation-broker-options">1.4.5. Broker options affecting federation</a></span></dt></dl></dd><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html">1.5. Security</a></span></dt><dd><dl><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-User_Authentication">1.5.1. User Authentication</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-Authorization">1.5.2. Authorization</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Authorization-Specifying_ACL_Quotas">1.5.3. User Connection and Queue Quotas</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-Encryption_using_SSL">1.5.4. Encryption using SSL</a></span></dt></dl></dd><
dt><span class="section"><a href="ch01s06.html">1.6. LVQ - Last Value Queue</a></span></dt><dd><dl><dt><span class="section"><a href="ch01s06.html#LVQ-UnderstandingLVQ">1.6.1. Understanding LVQ</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Creating">1.6.2. Creating a Last Value Queue</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Example">1.6.3. LVQ Example</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Deprecated">1.6.4. Deprecated LVQ Modes</a></span></dt></dl></dd><dt><span class="section"><a href="queue-state-replication.html">1.7.
+ Queue State Replication
+ </a></span></dt><dd><dl><dt><span class="section"><a href="queue-state-replication.html#queuestatereplication-AsynchronousReplicationofQueueState">1.7.1.
+ Asynchronous
+ Replication of Queue State
+ </a></span></dt></dl></dd><dt><span class="section"><a href="producer-flow-control.html">1.8.
+ Producer Flow Control
+ </a></span></dt><dd><dl><dt><span class="section"><a href="producer-flow-control.html#producerflowcontrol-Overview">1.8.1.
+ Overview
+ </a></span></dt><dt><span class="section"><a href="producer-flow-control.html#producerflowcontrol-UserInterface">1.8.2.
+ User Interface
+ </a></span></dt></dl></dd><dt><span class="section"><a href="AMQP-Compatibility.html">1.9.
+ AMQP compatibility
+ </a></span></dt><dd><dl><dt><span class="section"><a href="AMQP-Compatibility.html#AMQPcompatibility-AMQPCompatibilityofQpidreleases-3A">1.9.1.
+ AMQP
+ Compatibility of Qpid releases:
+ </a></span></dt><dt><span class="section"><a href="AMQP-Compatibility.html#AMQPcompatibility-InteroptablebyAMQPspecificationversion">1.9.2.
+ Interop
+ table by AMQP specification version
+ </a></span></dt></dl></dd><dt><span class="section"><a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html">1.10. Qpid Interoperability Documentation</a></span></dt><dd><dl><dt><span class="section"><a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#QpidInteroperabilityDocumentation-SASL">1.10.1.
+ SASL
+ </a></span></dt></dl></dd><dt><span class="section"><a href="Using-message-groups.html">1.11.
+ Using Message Groups
+ </a></span></dt><dd><dl><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-Overview">1.11.1.
+ Overview
+ </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-GroupingMessages">1.11.2.
+ Grouping Messages
+ </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-BrokerRole">1.11.3.
+ The Role of the Broker
+ </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-ConsumerGuide">1.11.4.
+ Well Behaved Consumers
+ </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-BrokerConfig">1.11.5.
+ Broker Configuration
+ </a></span></dt></dl></dd><dt><span class="section"><a href="chapter-ha.html">1.12. Active-Passive Messaging Clusters</a></span></dt><dd><dl><dt><span class="section"><a href="chapter-ha.html#ha-overview">1.12.1. Overview</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-virtual-ip">1.12.2. Virtual IP Addresses</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-broker-config">1.12.3. Configuring the Brokers</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-rm">1.12.4. The Cluster Resource Manager</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-rm-config">1.12.5. Configuring with <span class="command"><strong>rgmanager</strong></span> as resource manager</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-broker-admin">1.12.6. Broker Administration Tools</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-replicate-values">1.12.7. Controlling replication of queues and
exchanges</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-failover">1.12.8. Client Connection and Fail-over</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-security">1.12.9. Security and Access Control.</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-other-rm">1.12.10. Integrating with other Cluster Resource Managers</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-store">1.12.11. Using a message store in a cluster</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-troubleshoot">1.12.12. Troubleshooting a cluster</a></span></dt></dl></dd><dt><span class="section"><a href="ha-queue-replication.html">1.13. Replicating Queues with the HA module</a></span></dt><dd><dl><dt><span class="section"><a href="ha-queue-replication.html#idm140173354836560">1.13.1. Replicating queues</a></span></dt><dt><span class="section"><a href="ha-queue-replication.html#idm140173356524352">1.13.2. Replicating
queues between clusters</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="chapter-Managing-CPP-Broker.html">2.
+ Managing the AMQP Messaging Broker
+ </a></span></dt><dd><dl><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#section-Managing-CPP-Broker">2.1. Managing the C++ Broker </a></span></dt><dd><dl><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidconfig">2.1.1.
+ Using qpid-config
+ </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidroute">2.1.2.
+ Using qpid-route
+ </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidtool">2.1.3.
+ Using qpid-tool
+ </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidprintevents">2.1.4.
+ Using
+ qpid-printevents
+ </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#idm140173356835712">2.1.5. Using qpid-ha</a></span></dt></dl></dd><dt><span class="section"><a href="ch02s02.html">2.2.
+ Qpid Management Framework
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-WhatIsQMF">2.2.1.
+ What Is QMF
+ </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-GettingStartedwithQMF">2.2.2.
+ Getting
+ Started with QMF
+ </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-QMFConcepts">2.2.3.
+ QMF Concepts
+ </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-TheQMFProtocol">2.2.4.
+ The QMF
+ Protocol
+ </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-HowtoWriteaQMFConsole">2.2.5.
+ How
+ to Write a QMF Console
+ </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-HowtoWriteaQMFAgent">2.2.6.
+ How to
+ Write a QMF Agent
+ </a></span></dt></dl></dd><dt><span class="section"><a href="ch02s03.html">2.3.
+ QMF Python Console Tutorial
+ </a></span></dt><dd><dl><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-PrerequisiteInstallQpidMessaging">2.3.1.
+ Prerequisite
+ - Install Qpid Messaging
+ </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-SynchronousConsoleOperations">2.3.2.
+ Synchronous
+ Console Operations
+ </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-AsynchronousConsoleOperations">2.3.3.
+ Asynchronous
+ Console Operations
+ </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-DiscoveringwhatKindsofObjectsareAvailable">2.3.4.
+ Discovering what Kinds of Objects are Available
+ </a></span></dt></dl></dd></dl></dd></dl></div><div class="list-of-tables"><p><strong>List of Tables</strong></p><dl><dt>1.1. <a href="ch01.html#idm140173359592576">QMF Management - Broker Methods for Managing the Timestamp Configuration</a></dt><dt>1.2. <a href="ch01.html#idm140173359579408">C++ Broker Log Severity Levels</a></dt><dt>1.3. <a href="ch01.html#idm140173359567776">C++ Broker Log Categories</a></dt><dt>1.4. <a href="ch01.html#idm140173359554912">C++ Broker Log Statement Attributes</a></dt><dt>1.5. <a href="ch01.html#idm140173359543920">C++ Broker Log Enable/Disable RULE Format</a></dt><dt>1.6. <a href="ch01.html#idm140173359533472">C++ Broker Log Enable/Disable Settings Tables</a></dt><dt>1.7. <a href="ch01.html#idm140173359522352">C++ Broker Log Statement Visibility Determination</a></dt><dt>1.8. <a href="ch01.html#idm140173359509056">QMF Management - Broker Methods for Managing the Log Enable/Disable Settings</a></dt><dt>1.9. <a href="chap-Messaging_User_Gui
de-Broker_Federation.html#tabl-Messaging_User_Guide-The_qpid_route_Utility-qpid_route_options"><span class="command">qpid-route</span> options</a></dt><dt>1.10. <a href="chap-Messaging_User_Guide-Broker_Federation.html#tabl-Messaging_User_Guide-Resilient_Connections-State_values_in_qpid_route_list_connections">State values in <span class="command">$ qpid-route list connections</span></a></dt><dt>1.11. <a href="chap-Messaging_User_Guide-Broker_Federation.html#federation-broker-options-table">Broker Options for Federation</a></dt><dt>1.12. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rules_permission">ACL Rules: permission</a></dt><dt>1.13. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesaction">ACL Rules: action</a></dt><dt>1.14. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesobject">ACL Rules:object</a></dt><dt>1.15. <a href="chap-Messaging_User
_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesproperty">ACL Rules: property</a></dt><dt>1.16. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_ActionObject_properties">Broker Lookup Events With Allowed Action, Object, and Properties</a></dt><dt>1.17. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_UsernameSubstitution">ACL User Name and Domain Name Substitution Keywords</a></dt><dt>1.18. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_TopicExchangeMatch">Topic Exchange Wildcard Match Examples</a></dt><dt>1.19. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-Enabling_SSL_in_Clients-SSL_Client_Environment_Variables_for_C_clients">SSL Client Environment Variables for C++ clients</a></dt><dt>1.20. <a href="producer-flow-control.html#idm140173355457344">Queue Declare Method Flow Control Arguments</a></dt><dt>1.21. <a
href="producer-flow-control.html#idm140173358710048">Flow Control Statistics available in Queue's QMF Class</a></dt><dt>1.22. <a href="AMQP-Compatibility.html#idm140173353934112">AMQP Version Support by Qpid Release</a></dt><dt>1.23. <a href="AMQP-Compatibility.html#idm140173355678896">AMQP Version Support - alternate format</a></dt><dt>1.24. <a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#idm140173357589616">SASL Mechanism Support</a></dt><dt>1.25. <a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#idm140173356693152">SASL Custom Mechanisms</a></dt><dt>1.26. <a href="Using-message-groups.html#idm140173354541888">qpid-config options for creating message group queues</a></dt><dt>1.27. <a href="Using-message-groups.html#idm140173355737184">Queue Declare/Address Syntax Message Group Configuration Arguments</a></dt><dt>1.28. <a href="chapter-ha.html#ha-broker-options">Broker Options for High Availability Messaging Cluster<
/a></dt><dt>1.29. <a href="chapter-ha.html#ha-security-options">HA Security Options</a></dt><dt>2.1. <a href="ch02s02.html#idm140173358965968">XML Attributes for QMF Properties and Statistics</a></dt><dt>2.2. <a href="ch02s02.html#idm140173355554944">QMF Datatypes</a></dt><dt>2.3. <a href="ch02s02.html#idm140173353645952">XML Schema Mapping for QMF Types</a></dt><dt>2.4. <a href="ch02s03.html#idm140173354776496">QMF Python Console Class Methods</a></dt></dl></div><div class="list-of-examples"><p><strong>List of Examples</strong></p><dl><dt>1.1. <a href="ch01.html#idm140173359586608">Enabling Message Timestamping via QMF - Python</a></dt><dt>1.2. <a href="ch01.html#idm140173359500912">
+ Querying Log Settings via qpid-ctrl utility
+ </a></dt><dt>1.3. <a href="ch01.html#idm140173359497056">
+ Setting Log Settings via qpid-ctrl utility
+ </a></dt><dt>1.4. <a href="Using-message-groups.html#idm140173354612320">Creating a message group queue via qpid-config</a></dt><dt>1.5. <a href="Using-message-groups.html#idm140173353726960">Creating a message group queue using address syntax (C++)</a></dt><dt>1.6. <a href="Using-message-groups.html#idm140173354094592">Overriding the default message group identifier for the broker</a></dt></dl></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"> </td><td align="center" width="20%"> </td><td align="right" width="40%"> <a accesskey="n" href="pr01.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%"> </td><td align="center" width="20%"> </td><td align="right" valign="top" width="40%"> Introduction</td></tr></table></div></div>
+
+ <hr/>
+
+ <ul id="-apache-navigation">
+ <li><a href="http://www.apache.org/">Apache</a></li>
+ <li><a href="http://www.apache.org/licenses/">License</a></li>
+ <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+ <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+ <li><a href="/security.html">Security</a></li>
+ <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+ </ul>
+
+ <p id="-legal">
+ Apache Qpid, Messaging built on AMQP; Copyright © 2015
+ The Apache Software Foundation; Licensed under
+ the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+ License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+ Proton, Apache, the Apache feather logo, and the Apache Qpid
+ project logo are trademarks of The Apache Software
+ Foundation; All other marks mentioned may be trademarks or
+ registered trademarks of their respective owners
+ </p>
+ </div>
+ </div>
+ </div>
+ </body>
+</html>
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
new file mode 100644
index 0000000..fde0699
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
@@ -0,0 +1,149 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements. See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership. The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License. You may obtain a copy of the License at
+ -
+ - http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied. See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+ <head>
+ <title>Introduction - Apache Qpid™</title>
+ <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+ <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+ <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+ <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+ <script type="text/javascript">var _deferredFunctions = [];</script>
+ <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+ <!--[if lte IE 8]>
+ <link rel="stylesheet" href="/ie.css" type="text/css"/>
+ <script type="text/javascript" src="/html5shiv.js"></script>
+ <![endif]-->
+
+ <!-- Redirects for `go get` and godoc.org -->
+ <meta name="go-import"
+ content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+ <meta name="go-source"
+ content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+ </head>
+ <body>
+ <div id="-content">
+ <div id="-top" class="panel">
+ <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+ <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+ <ul id="-global-navigation">
+ <li><a id="-logotype" href="/index.html">Apache Qpid<sup>™</sup></a></li>
+ <li><a href="/documentation.html">Documentation</a></li>
+ <li><a href="/download.html">Download</a></li>
+ <li><a href="/discussion.html">Discussion</a></li>
+ </ul>
+ </div>
+
+ <div id="-menu" class="panel" style="display: none;">
+ <div class="flex">
+ <section>
+ <h3>Project</h3>
+
+ <ul>
+ <li><a href="/overview.html">Overview</a></li>
+ <li><a href="/components/index.html">Components</a></li>
+ <li><a href="/releases/index.html">Releases</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Messaging APIs</h3>
+
+ <ul>
+ <li><a href="/proton/index.html">Qpid Proton</a></li>
+ <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+ <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Servers and tools</h3>
+
+ <ul>
+ <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+ <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+ <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Resources</h3>
+
+ <ul>
+ <li><a href="/dashboard.html">Dashboard</a></li>
+ <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+ <li><a href="/resources.html">More resources</a></li>
+ </ul>
+ </section>
+ </div>
+ </div>
+
+ <div id="-search" class="panel" style="display: none;">
+ <form action="http://www.google.com/search" method="get">
+ <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+ <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+ <button type="submit">Search</button>
+ <a href="/search.html">More ways to search</a>
+ </form>
+ </div>
+
+ <div id="-middle" class="panel">
+ <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>Introduction</li></ul>
+
+ <div id="-middle-content">
+ <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">Introduction</th></tr><tr><td align="left" width="20%"><a accesskey="p" href="index.html">Prev</a> </td><th align="center" width="60%"> </th><td align="right" width="20%"> <a accesskey="n" href="ch01.html">Next</a></td></tr></table><hr /></div><div class="preface"><div class="titlepage"><div><div><h1 class="title"><a id="idm140173359849712"></a>Introduction</h1></div></div></div><p>Qpid provides two AMQP messaging brokers:</p><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>Implemented in C++ - high performance, low latency, and RDMA support.</p></li><li class="listitem"><p>Implemented in Java - Fully JMS compliant, runs on any Java platform.</p></li></ul></div><p>Both AMQP messaging brokers support clients in multiple
+ languages, as long as the messaging client and the messaging
+ broker use the same version of AMQP. See <a class="link" href="AMQP-Compatibility.html" title="1.9.  AMQP compatibility">AMQP Compatibility</a> to see
+ which messaging clients work with each broker.</p><p>This manual contains information specific to the broker that is implemented in C++.</p></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="index.html">Prev</a> </td><td align="center" width="20%"> </td><td align="right" width="40%"> <a accesskey="n" href="ch01.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">AMQP Messaging Broker (Implemented in C++) </td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%"> Chapter 1. 
+ Running the AMQP Messaging Broker
+ </td></tr></table></div></div>
+
+ <hr/>
+
+ <ul id="-apache-navigation">
+ <li><a href="http://www.apache.org/">Apache</a></li>
+ <li><a href="http://www.apache.org/licenses/">License</a></li>
+ <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+ <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+ <li><a href="/security.html">Security</a></li>
+ <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+ </ul>
+
+ <p id="-legal">
+ Apache Qpid, Messaging built on AMQP; Copyright © 2015
+ The Apache Software Foundation; Licensed under
+ the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+ License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+ Proton, Apache, the Apache feather logo, and the Apache Qpid
+ project logo are trademarks of The Apache Software
+ Foundation; All other marks mentioned may be trademarks or
+ registered trademarks of their respective owners
+ </p>
+ </div>
+ </div>
+ </div>
+ </body>
+</html>
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
new file mode 100644
index 0000000..3494d99
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
@@ -0,0 +1,334 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements. See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership. The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License. You may obtain a copy of the License at
+ -
+ - http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied. See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+ <head>
+ <title>producer-flow-control.html - Apache Qpid™</title>
+ <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+ <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+ <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+ <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+ <script type="text/javascript">var _deferredFunctions = [];</script>
+ <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+ <!--[if lte IE 8]>
+ <link rel="stylesheet" href="/ie.css" type="text/css"/>
+ <script type="text/javascript" src="/html5shiv.js"></script>
+ <![endif]-->
+
+ <!-- Redirects for `go get` and godoc.org -->
+ <meta name="go-import"
+ content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+ <meta name="go-source"
+ content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+ </head>
+ <body>
+ <div id="-content">
+ <div id="-top" class="panel">
+ <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+ <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+ <ul id="-global-navigation">
+ <li><a id="-logotype" href="/index.html">Apache Qpid<sup>™</sup></a></li>
+ <li><a href="/documentation.html">Documentation</a></li>
+ <li><a href="/download.html">Download</a></li>
+ <li><a href="/discussion.html">Discussion</a></li>
+ </ul>
+ </div>
+
+ <div id="-menu" class="panel" style="display: none;">
+ <div class="flex">
+ <section>
+ <h3>Project</h3>
+
+ <ul>
+ <li><a href="/overview.html">Overview</a></li>
+ <li><a href="/components/index.html">Components</a></li>
+ <li><a href="/releases/index.html">Releases</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Messaging APIs</h3>
+
+ <ul>
+ <li><a href="/proton/index.html">Qpid Proton</a></li>
+ <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+ <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Servers and tools</h3>
+
+ <ul>
+ <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+ <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+ <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Resources</h3>
+
+ <ul>
+ <li><a href="/dashboard.html">Dashboard</a></li>
+ <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+ <li><a href="/resources.html">More resources</a></li>
+ </ul>
+ </section>
+ </div>
+ </div>
+
+ <div id="-search" class="panel" style="display: none;">
+ <form action="http://www.google.com/search" method="get">
+ <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+ <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+ <button type="submit">Search</button>
+ <a href="/search.html">More ways to search</a>
+ </form>
+ </div>
+
+ <div id="-middle" class="panel">
+ <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>producer-flow-control.html</li></ul>
+
+ <div id="-middle-content">
+ <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">1.8. 
+ Producer Flow Control
+ </th></tr><tr><td align="left" width="20%"><a accesskey="p" href="queue-state-replication.html">Prev</a> </td><th align="center" width="60%">Chapter 1. 
+ Running the AMQP Messaging Broker
+ </th><td align="right" width="20%"> <a accesskey="n" href="AMQP-Compatibility.html">Next</a></td></tr></table><hr /></div><div class="section"><div class="titlepage"><div><div><h2 class="title"><a id="producer-flow-control"></a>1.8. 
+ Producer Flow Control
+ </h2></div></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="producerflowcontrol-Overview"></a>1.8.1. 
+ Overview
+ </h3></div></div></div><p>
+ As of release 0.10, the C++ broker supports the use of flow control to
+ throttle back message producers that are at risk of overflowing a
+ destination queue.
+ </p><p>
+ Each queue in the C++ broker has two threshold values associated with it:
+ </p><p>
+ Flow Stop Threshold: this is the level of queue resource
+ utilization above which flow control will be enabled. Once this
+ threshold is crossed, the queue is considered in danger of overflow.
+ </p><p>
+ Flow Resume Threshold - this is the level of queue resource utilization
+ below which flow control will be disabled. Once this threshold is
+ crossed, the queue is no longer considered in danger of overflow.
+ </p><p>
+ In the above description, queue resource utilization may be
+ defined as the total count of messages currently enqueued, or the total
+ sum of all message content in bytes.
+ </p><p>
+ The value for a queue's Flow Stop Threshold must be greater than or
+ equal to the value of the queue's Flow Resume Threshold.
+ </p><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="producerflowcontrol-QueueThresholdsExample"></a>1.8.1.1. 
+ Example
+ </h4></div></div></div><p>
+ Let's consider a queue with a maximum limit set on the total number of
+ messages that may be enqueued to that queue. Assume this maximum
+ message limit is 1000 messages. Assume also that the user configures a
+ Flow Stop Threshold of 900 messages, and a Flow Resume Threshold of 500
+ messages. Then the following holds:
+ </p><p>
+ The queue's initial flow control state is "OFF".
+ </p><p>
+ While the total number of enqueued messages is less than or equal to
+ 900, the queue's flow control state remains "OFF".
+ </p><p>
+ When the total number of enqueued messages is greater than 900, the
+ queue's flow control state transitions to "ON".
+ </p><p>
+ When the queue's flow control state is "ON", it remains "ON" until the
+ total number of enqueued messages is less than 500. At that point, the queue's
+ flow control state transitions to "OFF".
+ </p><p>
+ A similar example using total enqueued content bytes as the threshold
+ units are permitted.
+ </p></div><p>
+ Thresholds may be set using both total message counts and total byte
+ counts. In this case, the following rules apply:
+ </p><p>
+ 1) Flow control is "ON" when either stop threshold value is crossed.
+ </p><p>
+ 2) Flow control remains "ON" until both resume thresholds are satisfied.
+ </p><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="producerflowcontro-MultiThresholdExample"></a>1.8.1.2. 
+ Example
+ </h4></div></div></div><p>
+ Let's consider a queue with a maximum size limit of 10K bytes, and 5000
+ messages. A user may assign a Flow Stop Threshold based on a total
+ message count of 4000 messages. They may also assigne a Flow Stop
+ Threshold of 8K bytes. The queue's flow control state transitions to
+ "ON" if either threshold is crossed: (total-msgs greater-than 4000 OR total-bytes
+ greater-than 8K).
+ </p><p>
+ Assume the user has assigned Flow Resume threshold's of 3000 messages and
+ 6K bytes. Then the queue's flow control will remain active until both
+ thresholds are satified: (total-msg less-than 3000 AND total-bytes less-than 6K).
+ </p></div><p>
+ The Broker enforces flow control by delaying the completion of the
+ Message.Transfer command that causes a message to be delivered to a queue
+ with active flow control. The completion of the Message.Transfer command
+ is held off until flow control state transitions to "OFF" for all queues
+ that are a destination for that command.
+ </p><p>
+ A message producing client is permitted to have a finite number of
+ commands pending completion. When the total number of these outstanding
+ commands reaches the limit, the client must not issue further commands
+ until one or more of the outstanding commands have completed. This
+ window of outstanding commands is considered the sender's "capacity".
+ This allows any given producer to have a "capacity's" worth of messages
+ blocked due to flow control before the sender must stop sending further
+ messages.
+ </p><p>
+ This capacity window must be considered when determining a suitable
+ flow stop threshold for a given queue, as a producer may send its
+ capacity worth of messages _after_ a queue has reached the flow stop
+ threshold. Therefore, a flow stop threshould should be set such that
+ the queue can accomodate more messages without overflowing.
+ </p><p>
+ For example, assume two clients, C1 and C2, are producing messages to
+ one particular destination queue. Assume client C1 has a configured
+ capacity of 50 messages, and client C2's capacity is 15 messages. In
+ this example, assume C1 and C2 are the only clients queuing messages to
+ a given queue. If this queue has a Flow Stop Threshold of 100
+ messages, then, worst-case, the queue may receive up to 165 messages
+ before clients C1 and C2 are blocked from sending further messages.
+ This is due to the fact that the queue will enable flow control on
+ receipt of its 101'st message - preventing the completion of the
+ Message.Transfer command that carried the 101'st message. However, C1
+ and C2 are allowed to have a total of 65 (50 for C1 and 15 for C2)
+ messages pending completion of Message.Transfer before they will stop
+ producing messages. Thus, up to 65 messages may be enqueued beyond the
+ flow stop threshold before the producers will be blocked.
+ </p></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="producerflowcontrol-UserInterface"></a>1.8.2. 
+ User Interface
+ </h3></div></div></div><p>
+ By default, the C++ broker assigns a queue's flow stop and flow resume
+ thresholds when the queue is created. The C++ broker also allows the
+ user to manually specify the flow control thresholds on a per queue
+ basis.
+ </p><p>
+ However, queues that have been configured with a Limit Policy of type
+ RING or RING-STRICT do NOT have queue flow thresholds enabled by
+ default. The nature of a RING queue defines its behavior when its
+ capacity is reach: replace the oldest message.
+ </p><p>
+ The flow control state of a queue can be determined by the "flowState"
+ boolean in the queue's QMF management object. The queue's management
+ object also contains a counter that increments each time flow control
+ becomes active for the queue.
+ </p><p>
+ The broker applies a threshold ratio to compute a queue's default flow
+ control configuration. These thresholds are expressed as a percentage
+ of a queue's maximum capacity. There is one value for determining the
+ stop threshold, and another for determining the resume threshold. The
+ user may configure these percentages using the following broker
+ configuration options:
+ </p><pre class="programlisting">
+ --default-flow-stop-threshold ("Queue capacity level at which flow control is activated.")
+ --default-flow-resume-threshold ("Queue capacity level at which flow control is de-activated.")
+ </pre><p>
+ For example:
+ </p><pre class="programlisting">
+ qpidd --default-flow-stop-threshold=90 --default-flow-resume-threshold=75
+ </pre><p>
+ Sets the default flow stop threshold to 90% of a queue's maximum
+ capacity and the flow resume threshold to 75% of the maximum capacity.
+ If a queue is created with a default-queue-limit of 10000 bytes, then
+ the default flow stop threshold would be 90% of 10000 = 9000 bytes and
+ the flow resume threshold would be 75% of 10000 = 7500. The same
+ computation is performed should a queue be created with a maximum size
+ expressed as a message count instead of a byte count.
+ </p><p>
+ If not overridden by the user, the value of the
+ default-flow-stop-threshold is 80% and the value of the
+ default-flow-resume-threshold is 70%.
+ </p><p>
+ The user may disable default queue flow control broker-wide by
+ specifying the value 0 for both of these configuration options. Note
+ that flow control may still be applied manually on a per-queue basis in
+ this case.
+ </p><p>
+ The user may manually set the flow thresholds when creating a queue.
+ The following options may be provided when adding a queue using the
+ <span class="command"><strong>qpid-config</strong></span> command line tool:
+ </p><pre class="programlisting">
+ --flow-stop-size=<em class="replaceable"><code>N</code></em> Sets the queue's flow stop threshold to <em class="replaceable"><code>N</code></em> total bytes.
+ --flow-resume-size=<em class="replaceable"><code>N</code></em> Sets the queue's flow resume threshold to <em class="replaceable"><code>N</code></em> total bytes.
+ --flow-stop-count=<em class="replaceable"><code>N</code></em> Sets the queue's flow stop threshold to <em class="replaceable"><code>N</code></em> total messages.
+ --flow-resume-count=<em class="replaceable"><code>N</code></em> Sets the queue's flow resume threshold to <em class="replaceable"><code>N</code></em> total messages.
+ </pre><p>
+ Flow thresholds may also be specified in the
+ <span class="command"><strong>queue.declare</strong></span> method, via the
+ <span class="command"><strong>arguments</strong></span> parameter map. The following keys can be
+ provided in the arguments map for setting flow thresholds:
+ </p><div class="table"><a id="idm140173355457344"></a><p class="title"><strong>Table 1.20. Queue Declare Method Flow Control Arguments</strong></p><div class="table-contents"><table border="1" summary="Queue Declare Method Flow Control Arguments"><colgroup><col /><col /></colgroup><thead><tr><th>Key</th><th>Value</th></tr></thead><tbody><tr><td>qpid.flow_stop_size</td><td>integer - queue's flow stop threshold value in bytes</td></tr><tr><td>qpid.flow_resume_size</td><td>integer - queue's flow resume threshold value in bytes</td></tr><tr><td>qpid.flow_stop_count</td><td>integer - queue's flow stop threshold value as a message count</td></tr><tr><td>qpid.flow_resume_count</td><td>integer - queue's flow resume threshold value as a message count</td></tr></tbody></table></div></div><br class="table-break" /><p>
+ The user may disable flow control on a per queue basis by setting
+ the flow-stop-size and flow-stop-count to zero for the queue.
+ </p><p>
+ The current state of flow control for a given queue can be
+ determined by the "flowStopped" statistic. This statistic is
+ available in the queue's QMF management object. The value of
+ flowStopped is True when the queue's capacity has exceeded the
+ flow stop threshold. The value of flowStopped is False when the
+ queue is no longer blocking due to flow control.
+ </p><p>
+ A queue will also track the number of times flow control has been
+ activated. The "flowStoppedCount" statistic is incremented each time
+ the queue's capacity exceeds a flow stop threshold. This statistic can
+ be used to monitor the activity of flow control for any given queue
+ over time.
+ </p><div class="table"><a id="idm140173358710048"></a><p class="title"><strong>Table 1.21. Flow Control Statistics available in Queue's QMF Class</strong></p><div class="table-contents"><table border="1" summary="Flow Control Statistics available in Queue's QMF Class"><colgroup><col /><col /><col /></colgroup><thead><tr><th>Statistic Name</th><th>Type</th><th>Description</th></tr></thead><tbody><tr><td>flowStopped</td><td>Boolean</td><td>If true, producers are blocked by flow control.</td></tr><tr><td>flowStoppedCount</td><td>count32</td><td>Number of times flow control was activated for this queue</td></tr></tbody></table></div></div><br class="table-break" /></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="queue-state-replication.html">Prev</a> </td><td align="center" width="20%"><a accesskey="u" href="ch01.html">Up</a></td><td align="right" width="40%"> <a acc
esskey="n" href="AMQP-Compatibility.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">1.7. 
+ Queue State Replication
+  </td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%"> 1.9. 
+ AMQP compatibility
+ </td></tr></table></div></div>
+
+ <hr/>
+
+ <ul id="-apache-navigation">
+ <li><a href="http://www.apache.org/">Apache</a></li>
+ <li><a href="http://www.apache.org/licenses/">License</a></li>
+ <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+ <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+ <li><a href="/security.html">Security</a></li>
+ <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+ </ul>
+
+ <p id="-legal">
+ Apache Qpid, Messaging built on AMQP; Copyright © 2015
+ The Apache Software Foundation; Licensed under
+ the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+ License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+ Proton, Apache, the Apache feather logo, and the Apache Qpid
+ project logo are trademarks of The Apache Software
+ Foundation; All other marks mentioned may be trademarks or
+ registered trademarks of their respective owners
+ </p>
+ </div>
+ </div>
+ </div>
+ </body>
+</html>
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
new file mode 100644
index 0000000..9a87e51
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
@@ -0,0 +1,372 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements. See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership. The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License. You may obtain a copy of the License at
+ -
+ - http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied. See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+ <head>
+ <title>queue-state-replication.html - Apache Qpid™</title>
+ <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+ <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+ <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+ <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+ <script type="text/javascript">var _deferredFunctions = [];</script>
+ <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+ <!--[if lte IE 8]>
+ <link rel="stylesheet" href="/ie.css" type="text/css"/>
+ <script type="text/javascript" src="/html5shiv.js"></script>
+ <![endif]-->
+
+ <!-- Redirects for `go get` and godoc.org -->
+ <meta name="go-import"
+ content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+ <meta name="go-source"
+ content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+ </head>
+ <body>
+ <div id="-content">
+ <div id="-top" class="panel">
+ <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+ <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+ <ul id="-global-navigation">
+ <li><a id="-logotype" href="/index.html">Apache Qpid<sup>™</sup></a></li>
+ <li><a href="/documentation.html">Documentation</a></li>
+ <li><a href="/download.html">Download</a></li>
+ <li><a href="/discussion.html">Discussion</a></li>
+ </ul>
+ </div>
+
+ <div id="-menu" class="panel" style="display: none;">
+ <div class="flex">
+ <section>
+ <h3>Project</h3>
+
+ <ul>
+ <li><a href="/overview.html">Overview</a></li>
+ <li><a href="/components/index.html">Components</a></li>
+ <li><a href="/releases/index.html">Releases</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Messaging APIs</h3>
+
+ <ul>
+ <li><a href="/proton/index.html">Qpid Proton</a></li>
+ <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+ <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Servers and tools</h3>
+
+ <ul>
+ <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+ <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+ <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Resources</h3>
+
+ <ul>
+ <li><a href="/dashboard.html">Dashboard</a></li>
+ <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+ <li><a href="/resources.html">More resources</a></li>
+ </ul>
+ </section>
+ </div>
+ </div>
+
+ <div id="-search" class="panel" style="display: none;">
+ <form action="http://www.google.com/search" method="get">
+ <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+ <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+ <button type="submit">Search</button>
+ <a href="/search.html">More ways to search</a>
+ </form>
+ </div>
+
+ <div id="-middle" class="panel">
+ <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>queue-state-replication.html</li></ul>
+
+ <div id="-middle-content">
+ <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">1.7. 
+ Queue State Replication
+ </th></tr><tr><td align="left" width="20%"><a accesskey="p" href="ch01s06.html">Prev</a> </td><th align="center" width="60%">Chapter 1. 
+ Running the AMQP Messaging Broker
+ </th><td align="right" width="20%"> <a accesskey="n" href="producer-flow-control.html">Next</a></td></tr></table><hr /></div><div class="section"><div class="titlepage"><div><div><h2 class="title"><a id="queue-state-replication"></a>1.7. 
+ Queue State Replication
+ </h2></div></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="queuestatereplication-AsynchronousReplicationofQueueState"></a>1.7.1. 
+ Asynchronous
+ Replication of Queue State
+ </h3></div></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-Overview"></a>1.7.1.1. 
+ Overview
+ </h4></div></div></div><p>
+ There is support in qpidd for selective asynchronous replication
+ of queue state. This is achieved by:
+ </p><p>
+ (a) enabling event generation for the queues in question
+ </p><p>
+ (b) loading a plugin on the 'source' broker to encode those
+ events as messages on a replication queue (this plugin is
+ called
+ replicating_listener.so)
+ </p><p>
+ (c) loading a custom exchange plugin on the 'backup' broker (this
+ plugin is called replication_exchange.so)
+ </p><p>
+ (d) creating an instance of the replication exchange type on the
+ backup broker
+ </p><p>
+ (e) establishing a federation bridge between the replication
+ queue on the source broker and the replication exchange on the
+ backup broker
+ </p><p>
+ The bridge established between the source and backup brokers for
+ replication (step (e) above) should have acknowledgements turned
+ on (this may be done through the --ack N option to qpid-route).
+ This ensures that replication events are not lost if the bridge
+ fails.
+ </p><p>
+ The replication protocol will also eliminate duplicates to ensure
+ reliably replicated state. Note though that only one bridge per
+ replication exchange is supported. If clients try to publish to
+ the replication exchange or if more than a the single required
+ bridge from the replication queue on the source broker is
+ created, replication will be corrupted. (Access control may be
+ used to restrict access and help prevent this).
+ </p><p>
+ The replicating event listener plugin (step (b) above) has the
+ following options:
+ </p><pre class="programlisting">
+Queue Replication Options:
+ --replication-queue QUEUE Queue on which events for
+ other queues are recorded
+ --replication-listener-name NAME (replicator) name by which to register the
+ replicating event listener
+ --create-replication-queue if set, the replication will
+ be created if it does not
+ exist
+ </pre><p>
+ The name of the queue is required. It can either point to a
+ durable queue whose definition has been previously recorded, or
+ the --create-replication-queue option can be specified in which
+ case the queue will be created a simple non-durable queue if it
+ does not already exist.
+ </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-UsewithClustering"></a>1.7.1.2. 
+ Use with
+ Clustering
+ </h4></div></div></div><p>
+ The source and/or backup brokers may also be clustered brokers.
+ In this case the federated bridge will be re-established between
+ replicas should either of the originally connected nodes fail.
+ There are however the following limitations at present:
+ </p><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>The backup site does not process membership updates after it
+ establishes the first connection. In order for newly added
+ members on a source cluster to be eligible as failover targets,
+ the bridge must be recreated after those members have been added
+ to the source cluster.
+ </p></li></ul></div><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>New members added to a backup cluster will not receive
+ information about currently established bridges. Therefore in
+ order to allow the bridge to be re-established from these members
+ in the event of failure of older nodes, the bridge must be
+ recreated after the new members have joined.
+ </p></li></ul></div><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>Only a single URL can be passed to create the initial link
+ from backup site to the primary site. this means that at the time
+ of creating the initial connection the initial node in the
+ primary site to which the connection is made needs to be running.
+ Once connected the backup site will receive a membership update
+ of all the nodes in the primary site, and if the initial
+ connection node in the primary fails, the link will be
+ re-established on the next node that was started (time) on the
+ primary site.
+ </p></li></ul></div><p>
+ Due to the acknowledged transfer of events over the bridge (see
+ note above) manual recreation of the bridge and automatic
+ re-establishment of te bridge after connection failure (including
+ failover where either or both ends are clustered brokers) will
+ not result in event loss.
+ </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-OperationsonBackupQueues"></a>1.7.1.3. 
+ Operations
+ on Backup Queues
+ </h4></div></div></div><p>
+ When replicating the state of a queue to a backup broker it is
+ important to recognise that any other operations performed
+ directly on the backup queue may break the replication.
+ </p><p>
+ If the backup queue is to be an active (i.e. accessed by clients
+ while replication is on) only enqueues should be selected
+ for
+ replication. In this mode, any message enqueued on the source
+ brokers copy of the queue will also be enqueued on the backup
+ brokers copy. However not attempt will be made to remove messages
+ from the backup queue in response to removal of messages from the
+ source queue.
+ </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-SelectingQueuesforReplication"></a>1.7.1.4. 
+ Selecting
+ Queues for Replication
+ </h4></div></div></div><p>
+ Queues are selected for replication by specifying the types of
+ events they should generate (it is from these events that the
+ replicating plugin constructs messages which are then pulled and
+ processed by the backup site). This is done through options
+ passed to the initial queue-declare command that creates the
+ queue and may be done either through qpid-config or similar
+ tools, or by the application.
+ </p><p>
+ With qpid-config, the --generate-queue-events options is used:
+ </p><pre class="programlisting">
+ --generate-queue-events N
+ If set to 1, every enqueue will generate an event that can be processed by
+ registered listeners (e.g. for replication). If set to 2, events will be
+ generated for enqueues and dequeues
+ </pre><p>
+ From an application, the arguments field of the queue-declare
+ AMQP command is used to convey this information. An entry should
+ be added to the map with key 'qpid.queue_event_generation' and an
+ integer value of 1 (to replicate only enqueue events) or 2 (to
+ replicate both enqueue and dequeue events).
+ </p><p>
+ Applications written using the c++ client API may fine the
+ qpid::client::QueueOptions class convenient. This has a
+ enableQueueEvents() method on it that can be used to set the
+ option (the instance of QueueOptions is then passed as the value
+ of the arguments field in the queue-declare command. The boolean
+ option to that method should be set to true if only enequeue
+ events should be replicated; by default it is false meaning that
+ both enqueues and dequeues will be replicated. E.g.
+ </p><pre class="programlisting">
+ QueueOptions options;
+ options.enableQueueEvents(false);
+ session.queueDeclare(arg::queue="my-queue", arg::arguments=options);
+ </pre></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-Example"></a>1.7.1.5. 
+ Example
+ </h4></div></div></div><p>
+ Lets assume we will run the primary broker on host1 and the
+ backup on host2, have installed qpidd on both and have the
+ replicating_listener and replication_exchange plugins in qpidd's
+ module directory(*1).
+ </p><p>
+ On host1 we start the source broker and specifcy that a queue
+ called 'replication' should be used for storing the events until
+ consumed by the backup. We also request that this queue be
+ created (as transient) if not already specified:
+ </p><pre class="programlisting">
+ qpidd --replication-queue replication-queue --create-replication-queue true --log-enable info+
+ </pre><p>
+ On host2 we start up the backup broker ensuring that the
+ replication exchange module is loaded:
+ </p><pre class="programlisting">
+ qpidd
+ </pre><p>
+ We can then create the instance of that replication exchange that
+ we will use to process the events:
+ </p><pre class="programlisting">
+ qpid-config -a host2 add exchange replication replication-exchange
+ </pre><p>
+ If this fails with the message "Exchange type not implemented:
+ replication", it means the replication exchange module was
+ not
+ loaded. Check that the module is installed on your system and if
+ necessary provide the full path to the library.
+ </p><p>
+ We then connect the replication queue on the source broker with
+ the replication exchange on the backup broker using the
+ qpid-route command:
+ </p><pre class="programlisting">
+ qpid-route --ack 50 queue add host2 host1 replication-exchange replication-queue
+</pre><p>
+ The example above configures the bridge to acknowledge messages
+ in batches of 50.
+ </p><p>
+ Now create two queues (on both source and backup brokers), one
+ replicating both enqueues and dequeues (queue-a) and the
+ other
+ replicating only dequeues (queue-b):
+ </p><pre class="programlisting">
+ qpid-config -a host1 add queue queue-a --generate-queue-events 2
+ qpid-config -a host1 add queue queue-b --generate-queue-events 1
+
+ qpid-config -a host2 add queue queue-a
+ qpid-config -a host2 add queue queue-b
+ </pre><p>
+ We are now ready to use the queues and see the replication.
+ </p><p>
+ Any message enqueued on queue-a will be replicated to the backup
+ broker. When the message is acknowledged by a client connected to
+ host1 (and thus dequeued), that message will be removed from the
+ copy of the queue on host2. The state of queue-a on host2 will
+ thus mirror that of the equivalent queue on host1, albeit with a
+ small lag. (Note
+ however that we must not have clients connected to host2 publish
+ to-or consume from- queue-a or the state will fail to replicate
+ correctly due to conflicts).
+ </p><p>
+ Any message enqueued on queue-b on host1 will also be enqueued on
+ the equivalent queue on host2. However the acknowledgement and
+ consequent dequeuing of messages from queue-b on host1 will have
+ no effect on the state of queue-b on host2.
+ </p><p>
+ (*1) If not the paths in the above may need to be modified. E.g.
+ if using modules built from a qpid svn checkout, the following
+ would be added to the command line used to start qpidd on host1:
+ </p><pre class="programlisting">
+ --load-module <path-to-qpid-dir>/src/.libs/replicating_listener.so
+ </pre><p>
+ and the following for the equivalent command line on host2:
+ </p><pre class="programlisting">
+ --load-module <path-to-qpid-dir>/src/.libs/replication_exchange.so
+ </pre></div></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="ch01s06.html">Prev</a> </td><td align="center" width="20%"><a accesskey="u" href="ch01.html">Up</a></td><td align="right" width="40%"> <a accesskey="n" href="producer-flow-control.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">1.6. LVQ - Last Value Queue </td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%"> 1.8. 
+ Producer Flow Control
+ </td></tr></table></div></div>
+
+ <hr/>
+
+ <ul id="-apache-navigation">
+ <li><a href="http://www.apache.org/">Apache</a></li>
+ <li><a href="http://www.apache.org/licenses/">License</a></li>
+ <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+ <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+ <li><a href="/security.html">Security</a></li>
+ <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+ </ul>
+
+ <p id="-legal">
+ Apache Qpid, Messaging built on AMQP; Copyright © 2015
+ The Apache Software Foundation; Licensed under
+ the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+ License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+ Proton, Apache, the Apache feather logo, and the Apache Qpid
+ project logo are trademarks of The Apache Software
+ Foundation; All other marks mentioned may be trademarks or
+ registered trademarks of their respective owners
+ </p>
+ </div>
+ </div>
+ </div>
+ </body>
+</html>
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf b/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf
new file mode 100755
index 0000000..50f781b
Binary files /dev/null and b/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf differ
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/index.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/index.html b/content/releases/qpid-cpp-1.35.0/index.html
new file mode 100644
index 0000000..09286d4
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/index.html
@@ -0,0 +1,230 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements. See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership. The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License. You may obtain a copy of the License at
+ -
+ - http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied. See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+ <head>
+ <title>Qpid C++ 1.35.0 - Apache Qpid™</title>
+ <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+ <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+ <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+ <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+ <script type="text/javascript">var _deferredFunctions = [];</script>
+ <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+ <!--[if lte IE 8]>
+ <link rel="stylesheet" href="/ie.css" type="text/css"/>
+ <script type="text/javascript" src="/html5shiv.js"></script>
+ <![endif]-->
+
+ <!-- Redirects for `go get` and godoc.org -->
+ <meta name="go-import"
+ content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+ <meta name="go-source"
+ content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+ </head>
+ <body>
+ <div id="-content">
+ <div id="-top" class="panel">
+ <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+ <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+ <ul id="-global-navigation">
+ <li><a id="-logotype" href="/index.html">Apache Qpid<sup>™</sup></a></li>
+ <li><a href="/documentation.html">Documentation</a></li>
+ <li><a href="/download.html">Download</a></li>
+ <li><a href="/discussion.html">Discussion</a></li>
+ </ul>
+ </div>
+
+ <div id="-menu" class="panel" style="display: none;">
+ <div class="flex">
+ <section>
+ <h3>Project</h3>
+
+ <ul>
+ <li><a href="/overview.html">Overview</a></li>
+ <li><a href="/components/index.html">Components</a></li>
+ <li><a href="/releases/index.html">Releases</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Messaging APIs</h3>
+
+ <ul>
+ <li><a href="/proton/index.html">Qpid Proton</a></li>
+ <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+ <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Servers and tools</h3>
+
+ <ul>
+ <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+ <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+ <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+ </ul>
+ </section>
+
+ <section>
+ <h3>Resources</h3>
+
+ <ul>
+ <li><a href="/dashboard.html">Dashboard</a></li>
+ <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+ <li><a href="/resources.html">More resources</a></li>
+ </ul>
+ </section>
+ </div>
+ </div>
+
+ <div id="-search" class="panel" style="display: none;">
+ <form action="http://www.google.com/search" method="get">
+ <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+ <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+ <button type="submit">Search</button>
+ <a href="/search.html">More ways to search</a>
+ </form>
+ </div>
+
+ <div id="-middle" class="panel">
+ <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li>Qpid C++ 1.35.0</li></ul>
+
+ <div id="-middle-content">
+ <h1 id="qpid-c-1350">Qpid C++ 1.35.0</h1>
+
+<p>Qpid C++ offers a connection-oriented messaging API and a message
+broker written in C++ that stores, routes, and forwards messages using
+AMQP. More about <a href="/index.html">Qpid</a>.</p>
+
+<p>For a detailed list of the changes in this release, see the <a href="release-notes.html">release
+notes</a>.</p>
+
+<p>It's important to <a href="/download.html#verify-what-you-download">verify the
+integrity</a> of the
+files you download.</p>
+
+<h2 id="source-archives">Source archives</h2>
+
+<table>
+<thead>
+<tr>
+ <th>Content</th>
+ <th>Download</th>
+ <th>Verify</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+ <td>C++ broker, Qpid Messaging API (C++)</td>
+ <td><a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz">qpid-cpp-1.35.0.tar.gz</a></td>
+ <td><a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.asc">ASC</a>, <a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.md5">MD5</a>, <a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.sha1">SHA1</a></td>
+</tr>
+</tbody>
+</table>
+
+<h2 id="components">Components</h2>
+
+<table>
+<thead>
+<tr>
+ <th>Component</th>
+ <th>Languages</th>
+ <th>Platforms</th>
+ <th>AMQP versions</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+ <td><a href="/components/cpp-broker/index.html">C++ broker</a></td>
+ <td>C++</td>
+ <td>Linux, Windows</td>
+ <td>1.0, 0-10</td>
+</tr>
+<tr>
+ <td><a href="/components/messaging-api/index.html">Qpid Messaging API</a></td>
+ <td>C++</td>
+ <td>Linux, Windows</td>
+ <td>1.0, 0-10</td>
+</tr>
+</tbody>
+</table>
+
+<h2 id="documentation">Documentation</h2>
+
+<div class="two-column">
+
+<ul>
+<li><a href="https://git-wip-us.apache.org/repos/asf?p=qpid-cpp.git;a=blob_plain;f=INSTALL.txt;hb=HEAD">Installing Qpid C++</a></li>
+<li><a href="cpp-broker/book/index.html">C++ broker book</a> (<a href="cpp-broker/cpp-broker-book.pdf">PDF</a>)</li>
+<li><a href="messaging-api/cpp/api/index.html">C++ API reference</a></li>
+<li><a href="messaging-api/cpp/examples/index.html">C++ examples</a></li>
+</ul>
+
+</div>
+
+<h2 id="more-information">More information</h2>
+
+<ul>
+<li><a href="https://issues.apache.org/jira/issues/?jql=project+%3D+QPID+AND+fixVersion+%3D+%27qpid-cpp-1.35.0%27+AND+resolution+%3D+%27fixed%27+ORDER+BY+priority+DESC">Resolved issues in JIRA</a></li>
+<li><a href="http://svn.apache.org/repos/asf/qpid/tags/qpid-cpp-1.35.0">Source repository tag</a></li>
+</ul>
+
+<script type="text/javascript">
+ _deferredFunctions.push(function() {
+ if ("1.35.0" === "1.35.0") {
+ _modifyCurrentReleaseLinks();
+ }
+ });
+</script>
+
+
+ <hr/>
+
+ <ul id="-apache-navigation">
+ <li><a href="http://www.apache.org/">Apache</a></li>
+ <li><a href="http://www.apache.org/licenses/">License</a></li>
+ <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+ <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+ <li><a href="/security.html">Security</a></li>
+ <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+ </ul>
+
+ <p id="-legal">
+ Apache Qpid, Messaging built on AMQP; Copyright © 2015
+ The Apache Software Foundation; Licensed under
+ the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+ License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+ Proton, Apache, the Apache feather logo, and the Apache Qpid
+ project logo are trademarks of The Apache Software
+ Foundation; All other marks mentioned may be trademarks or
+ registered trademarks of their respective owners
+ </p>
+ </div>
+ </div>
+ </div>
+ </body>
+</html>
---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscribe@qpid.apache.org
For additional commands, e-mail: commits-help@qpid.apache.org