You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Maxim Solodovnik <so...@gmail.com> on 2013/08/20 19:10:34 UTC
Screensharing seems to be fixed
subj.
URL: http://svn.apache.org/r1515875
Log:
[OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work
as expected
I hope screensharing applet will work as expected in 3.0.0 since this
revision
--
WBR
Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Gmail <je...@gmail.com>.
Hello friends,
Could you share your experience in screen sharing . My screen viewer window is too small to look at the letters and images inside the window. I cannot maximise the browser window. How can I fix this issue.
Sent from my iPhone
On 25-Aug-2013, at 12:26 PM, Maxim Solodovnik <so...@gmail.com> wrote:
> not sure :)
> audio for screen publishing was not finished, recording should work as it was (haven't changed it)
>
>
> On Sun, Aug 25, 2013 at 6:48 AM, Lee Saunders <le...@gmail.com> wrote:
>> Hello Sebastian,
>>
>> Yes, I hear the audio now (OM 2.1.1).
>> This is very good software once the set up has been figured out.
>>
>> All the best,
>> Lee.
>>
>>
>> On Sun, Aug 25, 2013 at 12:38 AM, seba.wagner@gmail.com <se...@gmail.com> wrote:
>>> Actually the recording will capture all audio from the conference and mix it into the screensharing?
>>>
>>> Was this feature removed or is currently not working in the 3.x tree?
>>>
>>> Thanks,
>>> Sebastian
>>>
>>>
>>> 2013/8/25 Maxim Solodovnik <so...@gmail.com>
>>>> not yet :( the code to implement this is not complete, maybe in future versions it will be implemented
>>>>
>>>>
>>>> On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders <le...@gmail.com> wrote:
>>>>> Screenrecording works on my computer. There was a Java problem, but that seems to have gone.
>>>>> Is there a way to record audio and the screen at the same time?
>>>>>
>>>>>
>>>>> On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <le...@gmail.com> wrote:
>>>>>> I hope it works, I need to be able to record the whiteboard sessions for my students to review.
>>>>>>
>>>>>>
>>>>>> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <so...@gmail.com> wrote:
>>>>>>> not sure, haven't tested it
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <al...@gmail.com> wrote:
>>>>>>>> Does red5sip still work with openmeetings when this red5 version is used?
>>>>>>>> --
>>>>>>>> With best regards / с наилучшими пожеланиями,
>>>>>>>> Alexei Fedotov / Алексей Федотов,
>>>>>>>> http://dataved.ru/
>>>>>>>> +7 916 562 8095
>>>>>>>>
>>>>>>>> [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
>>>>>>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>>>>>>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com> wrote:
>>>>>>>> > 2.1.1 have no such issue, it uses another red5 version
>>>>>>>> >
>>>>>>>> >
>>>>>>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>>>>>>>> >>
>>>>>>>> >> The same problem are fixed on 2.1.1?
>>>>>>>> >>
>>>>>>>> >> Regards
>>>>>>>> >>
>>>>>>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>>>>>>> >>
>>>>>>>> >>> cool
>>>>>>>> >>> --
>>>>>>>> >>> With best regards / с наилучшими пожеланиями,
>>>>>>>> >>> Alexei Fedotov / Алексей Федотов,
>>>>>>>> >>> http://dataved.ru/
>>>>>>>> >>> +7 916 562 8095
>>>>>>>> >>>
>>>>>>>> >>> [1] Start using Apache Openmeetings today,
>>>>>>>> >>> http://openmeetings.apache.org/
>>>>>>>> >>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>>>>>>> >>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>>>>>>> >>>
>>>>>>>> >>>
>>>>>>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com>
>>>>>>>> >>> wrote:
>>>>>>>> >>>>
>>>>>>>> >>>> subj.
>>>>>>>> >>>>
>>>>>>>> >>>> URL: http://svn.apache.org/r1515875
>>>>>>>> >>>> Log:
>>>>>>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to
>>>>>>>> >>>> work
>>>>>>>> >>>> as expected
>>>>>>>> >>>>
>>>>>>>> >>>>
>>>>>>>> >>>> I hope screensharing applet will work as expected in 3.0.0 since this
>>>>>>>> >>>> revision
>>>>>>>> >>>>
>>>>>>>> >>>>
>>>>>>>> >>>> --
>>>>>>>> >>>> WBR
>>>>>>>> >>>> Maxim aka solomax
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >
>>>>>>>> >
>>>>>>>> >
>>>>>>>> > --
>>>>>>>> > WBR
>>>>>>>> > Maxim aka solomax
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> WBR
>>>>>>> Maxim aka solomax
>>>>
>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>
>>>
>>>
>>> --
>>> Sebastian Wagner
>>> https://twitter.com/#!/dead_lock
>>> http://www.webbase-design.de
>>> http://www.wagner-sebastian.com
>>> seba.wagner@gmail.com
>
>
>
> --
> WBR
> Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Maxim Solodovnik <so...@gmail.com>.
not sure :)
audio for screen publishing was not finished, recording should work as it
was (haven't changed it)
On Sun, Aug 25, 2013 at 6:48 AM, Lee Saunders
<le...@gmail.com>wrote:
> Hello Sebastian,
>
> Yes, I hear the audio now (OM 2.1.1).
> This is very good software once the set up has been figured out.
>
> All the best,
> Lee.
>
>
> On Sun, Aug 25, 2013 at 12:38 AM, seba.wagner@gmail.com <
> seba.wagner@gmail.com> wrote:
>
>> Actually the recording will capture all audio from the conference and mix
>> it into the screensharing?
>>
>> Was this feature removed or is currently not working in the 3.x tree?
>>
>> Thanks,
>> Sebastian
>>
>>
>> 2013/8/25 Maxim Solodovnik <so...@gmail.com>
>>
>>> not yet :( the code to implement this is not complete, maybe in future
>>> versions it will be implemented
>>>
>>>
>>> On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders <
>>> leesenglishlessons@gmail.com> wrote:
>>>
>>>> Screenrecording works on my computer. There was a Java problem, but
>>>> that seems to have gone.
>>>> Is there a way to record audio and the screen at the same time?
>>>>
>>>>
>>>> On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <
>>>> leesenglishlessons@gmail.com> wrote:
>>>>
>>>>> I hope it works, I need to be able to record the whiteboard sessions
>>>>> for my students to review.
>>>>>
>>>>>
>>>>> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <
>>>>> solomax666@gmail.com> wrote:
>>>>>
>>>>>> not sure, haven't tested it
>>>>>>
>>>>>>
>>>>>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <
>>>>>> alexei.fedotov@gmail.com> wrote:
>>>>>>
>>>>>>> Does red5sip still work with openmeetings when this red5 version is
>>>>>>> used?
>>>>>>> --
>>>>>>> With best regards / с наилучшими пожеланиями,
>>>>>>> Alexei Fedotov / Алексей Федотов,
>>>>>>> http://dataved.ru/
>>>>>>> +7 916 562 8095
>>>>>>>
>>>>>>> [1] Start using Apache Openmeetings today,
>>>>>>> http://openmeetings.apache.org/
>>>>>>> [2] Join Alexei Fedotov @linkedin,
>>>>>>> http://ru.linkedin.com/in/dataved/
>>>>>>> [3] Join Alexei Fedotov @facebook,
>>>>>>> http://www.facebook.com/openmeetings
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <
>>>>>>> solomax666@gmail.com> wrote:
>>>>>>> > 2.1.1 have no such issue, it uses another red5 version
>>>>>>> >
>>>>>>> >
>>>>>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com>
>>>>>>> wrote:
>>>>>>> >>
>>>>>>> >> The same problem are fixed on 2.1.1?
>>>>>>> >>
>>>>>>> >> Regards
>>>>>>> >>
>>>>>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>>>>>> >>
>>>>>>> >>> cool
>>>>>>> >>> --
>>>>>>> >>> With best regards / с наилучшими пожеланиями,
>>>>>>> >>> Alexei Fedotov / Алексей Федотов,
>>>>>>> >>> http://dataved.ru/
>>>>>>> >>> +7 916 562 8095
>>>>>>> >>>
>>>>>>> >>> [1] Start using Apache Openmeetings today,
>>>>>>> >>> http://openmeetings.apache.org/
>>>>>>> >>> [2] Join Alexei Fedotov @linkedin,
>>>>>>> http://ru.linkedin.com/in/dataved/
>>>>>>> >>> [3] Join Alexei Fedotov @facebook,
>>>>>>> http://www.facebook.com/openmeetings
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>>>>>>> solomax666@gmail.com>
>>>>>>> >>> wrote:
>>>>>>> >>>>
>>>>>>> >>>> subj.
>>>>>>> >>>>
>>>>>>> >>>> URL: http://svn.apache.org/r1515875
>>>>>>> >>>> Log:
>>>>>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing
>>>>>>> seems to
>>>>>>> >>>> work
>>>>>>> >>>> as expected
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> I hope screensharing applet will work as expected in 3.0.0
>>>>>>> since this
>>>>>>> >>>> revision
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> --
>>>>>>> >>>> WBR
>>>>>>> >>>> Maxim aka solomax
>>>>>>> >>
>>>>>>> >>
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> > --
>>>>>>> > WBR
>>>>>>> > Maxim aka solomax
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> WBR
>>>>>> Maxim aka solomax
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>>
>> --
>> Sebastian Wagner
>> https://twitter.com/#!/dead_lock
>> http://www.webbase-design.de
>> http://www.wagner-sebastian.com
>> seba.wagner@gmail.com
>>
>
>
--
WBR
Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Lee Saunders <le...@gmail.com>.
Hello Sebastian,
Yes, I hear the audio now (OM 2.1.1).
This is very good software once the set up has been figured out.
All the best,
Lee.
On Sun, Aug 25, 2013 at 12:38 AM, seba.wagner@gmail.com <
seba.wagner@gmail.com> wrote:
> Actually the recording will capture all audio from the conference and mix
> it into the screensharing?
>
> Was this feature removed or is currently not working in the 3.x tree?
>
> Thanks,
> Sebastian
>
>
> 2013/8/25 Maxim Solodovnik <so...@gmail.com>
>
>> not yet :( the code to implement this is not complete, maybe in future
>> versions it will be implemented
>>
>>
>> On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders <
>> leesenglishlessons@gmail.com> wrote:
>>
>>> Screenrecording works on my computer. There was a Java problem, but that
>>> seems to have gone.
>>> Is there a way to record audio and the screen at the same time?
>>>
>>>
>>> On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <
>>> leesenglishlessons@gmail.com> wrote:
>>>
>>>> I hope it works, I need to be able to record the whiteboard sessions
>>>> for my students to review.
>>>>
>>>>
>>>> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <solomax666@gmail.com
>>>> > wrote:
>>>>
>>>>> not sure, haven't tested it
>>>>>
>>>>>
>>>>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <
>>>>> alexei.fedotov@gmail.com> wrote:
>>>>>
>>>>>> Does red5sip still work with openmeetings when this red5 version is
>>>>>> used?
>>>>>> --
>>>>>> With best regards / с наилучшими пожеланиями,
>>>>>> Alexei Fedotov / Алексей Федотов,
>>>>>> http://dataved.ru/
>>>>>> +7 916 562 8095
>>>>>>
>>>>>> [1] Start using Apache Openmeetings today,
>>>>>> http://openmeetings.apache.org/
>>>>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>>>>> [3] Join Alexei Fedotov @facebook,
>>>>>> http://www.facebook.com/openmeetings
>>>>>>
>>>>>>
>>>>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <
>>>>>> solomax666@gmail.com> wrote:
>>>>>> > 2.1.1 have no such issue, it uses another red5 version
>>>>>> >
>>>>>> >
>>>>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com>
>>>>>> wrote:
>>>>>> >>
>>>>>> >> The same problem are fixed on 2.1.1?
>>>>>> >>
>>>>>> >> Regards
>>>>>> >>
>>>>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>>>>> >>
>>>>>> >>> cool
>>>>>> >>> --
>>>>>> >>> With best regards / с наилучшими пожеланиями,
>>>>>> >>> Alexei Fedotov / Алексей Федотов,
>>>>>> >>> http://dataved.ru/
>>>>>> >>> +7 916 562 8095
>>>>>> >>>
>>>>>> >>> [1] Start using Apache Openmeetings today,
>>>>>> >>> http://openmeetings.apache.org/
>>>>>> >>> [2] Join Alexei Fedotov @linkedin,
>>>>>> http://ru.linkedin.com/in/dataved/
>>>>>> >>> [3] Join Alexei Fedotov @facebook,
>>>>>> http://www.facebook.com/openmeetings
>>>>>> >>>
>>>>>> >>>
>>>>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>>>>>> solomax666@gmail.com>
>>>>>> >>> wrote:
>>>>>> >>>>
>>>>>> >>>> subj.
>>>>>> >>>>
>>>>>> >>>> URL: http://svn.apache.org/r1515875
>>>>>> >>>> Log:
>>>>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing
>>>>>> seems to
>>>>>> >>>> work
>>>>>> >>>> as expected
>>>>>> >>>>
>>>>>> >>>>
>>>>>> >>>> I hope screensharing applet will work as expected in 3.0.0 since
>>>>>> this
>>>>>> >>>> revision
>>>>>> >>>>
>>>>>> >>>>
>>>>>> >>>> --
>>>>>> >>>> WBR
>>>>>> >>>> Maxim aka solomax
>>>>>> >>
>>>>>> >>
>>>>>> >
>>>>>> >
>>>>>> >
>>>>>> > --
>>>>>> > WBR
>>>>>> > Maxim aka solomax
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> WBR
>>>>> Maxim aka solomax
>>>>>
>>>>
>>>>
>>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>
>
> --
> Sebastian Wagner
> https://twitter.com/#!/dead_lock
> http://www.webbase-design.de
> http://www.wagner-sebastian.com
> seba.wagner@gmail.com
>
Re: Screensharing seems to be fixed
Posted by "seba.wagner@gmail.com" <se...@gmail.com>.
Actually the recording will capture all audio from the conference and mix
it into the screensharing?
Was this feature removed or is currently not working in the 3.x tree?
Thanks,
Sebastian
2013/8/25 Maxim Solodovnik <so...@gmail.com>
> not yet :( the code to implement this is not complete, maybe in future
> versions it will be implemented
>
>
> On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders <
> leesenglishlessons@gmail.com> wrote:
>
>> Screenrecording works on my computer. There was a Java problem, but that
>> seems to have gone.
>> Is there a way to record audio and the screen at the same time?
>>
>>
>> On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <
>> leesenglishlessons@gmail.com> wrote:
>>
>>> I hope it works, I need to be able to record the whiteboard sessions for
>>> my students to review.
>>>
>>>
>>> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <so...@gmail.com>wrote:
>>>
>>>> not sure, haven't tested it
>>>>
>>>>
>>>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <
>>>> alexei.fedotov@gmail.com> wrote:
>>>>
>>>>> Does red5sip still work with openmeetings when this red5 version is
>>>>> used?
>>>>> --
>>>>> With best regards / с наилучшими пожеланиями,
>>>>> Alexei Fedotov / Алексей Федотов,
>>>>> http://dataved.ru/
>>>>> +7 916 562 8095
>>>>>
>>>>> [1] Start using Apache Openmeetings today,
>>>>> http://openmeetings.apache.org/
>>>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>>>> [3] Join Alexei Fedotov @facebook,
>>>>> http://www.facebook.com/openmeetings
>>>>>
>>>>>
>>>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <
>>>>> solomax666@gmail.com> wrote:
>>>>> > 2.1.1 have no such issue, it uses another red5 version
>>>>> >
>>>>> >
>>>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>>>>> >>
>>>>> >> The same problem are fixed on 2.1.1?
>>>>> >>
>>>>> >> Regards
>>>>> >>
>>>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>>>> >>
>>>>> >>> cool
>>>>> >>> --
>>>>> >>> With best regards / с наилучшими пожеланиями,
>>>>> >>> Alexei Fedotov / Алексей Федотов,
>>>>> >>> http://dataved.ru/
>>>>> >>> +7 916 562 8095
>>>>> >>>
>>>>> >>> [1] Start using Apache Openmeetings today,
>>>>> >>> http://openmeetings.apache.org/
>>>>> >>> [2] Join Alexei Fedotov @linkedin,
>>>>> http://ru.linkedin.com/in/dataved/
>>>>> >>> [3] Join Alexei Fedotov @facebook,
>>>>> http://www.facebook.com/openmeetings
>>>>> >>>
>>>>> >>>
>>>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>>>>> solomax666@gmail.com>
>>>>> >>> wrote:
>>>>> >>>>
>>>>> >>>> subj.
>>>>> >>>>
>>>>> >>>> URL: http://svn.apache.org/r1515875
>>>>> >>>> Log:
>>>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing
>>>>> seems to
>>>>> >>>> work
>>>>> >>>> as expected
>>>>> >>>>
>>>>> >>>>
>>>>> >>>> I hope screensharing applet will work as expected in 3.0.0 since
>>>>> this
>>>>> >>>> revision
>>>>> >>>>
>>>>> >>>>
>>>>> >>>> --
>>>>> >>>> WBR
>>>>> >>>> Maxim aka solomax
>>>>> >>
>>>>> >>
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > WBR
>>>>> > Maxim aka solomax
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>>>
>>>
>>>
>>
>
>
> --
> WBR
> Maxim aka solomax
>
--
Sebastian Wagner
https://twitter.com/#!/dead_lock
http://www.webbase-design.de
http://www.wagner-sebastian.com
seba.wagner@gmail.com
Re: Screensharing seems to be fixed
Posted by Maxim Solodovnik <so...@gmail.com>.
not yet :( the code to implement this is not complete, maybe in future
versions it will be implemented
On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders
<le...@gmail.com>wrote:
> Screenrecording works on my computer. There was a Java problem, but that
> seems to have gone.
> Is there a way to record audio and the screen at the same time?
>
>
> On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <
> leesenglishlessons@gmail.com> wrote:
>
>> I hope it works, I need to be able to record the whiteboard sessions for
>> my students to review.
>>
>>
>> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <so...@gmail.com>wrote:
>>
>>> not sure, haven't tested it
>>>
>>>
>>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <
>>> alexei.fedotov@gmail.com> wrote:
>>>
>>>> Does red5sip still work with openmeetings when this red5 version is
>>>> used?
>>>> --
>>>> With best regards / с наилучшими пожеланиями,
>>>> Alexei Fedotov / Алексей Федотов,
>>>> http://dataved.ru/
>>>> +7 916 562 8095
>>>>
>>>> [1] Start using Apache Openmeetings today,
>>>> http://openmeetings.apache.org/
>>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>>>
>>>>
>>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com>
>>>> wrote:
>>>> > 2.1.1 have no such issue, it uses another red5 version
>>>> >
>>>> >
>>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>>>> >>
>>>> >> The same problem are fixed on 2.1.1?
>>>> >>
>>>> >> Regards
>>>> >>
>>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>>> >>
>>>> >>> cool
>>>> >>> --
>>>> >>> With best regards / с наилучшими пожеланиями,
>>>> >>> Alexei Fedotov / Алексей Федотов,
>>>> >>> http://dataved.ru/
>>>> >>> +7 916 562 8095
>>>> >>>
>>>> >>> [1] Start using Apache Openmeetings today,
>>>> >>> http://openmeetings.apache.org/
>>>> >>> [2] Join Alexei Fedotov @linkedin,
>>>> http://ru.linkedin.com/in/dataved/
>>>> >>> [3] Join Alexei Fedotov @facebook,
>>>> http://www.facebook.com/openmeetings
>>>> >>>
>>>> >>>
>>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>>>> solomax666@gmail.com>
>>>> >>> wrote:
>>>> >>>>
>>>> >>>> subj.
>>>> >>>>
>>>> >>>> URL: http://svn.apache.org/r1515875
>>>> >>>> Log:
>>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing
>>>> seems to
>>>> >>>> work
>>>> >>>> as expected
>>>> >>>>
>>>> >>>>
>>>> >>>> I hope screensharing applet will work as expected in 3.0.0 since
>>>> this
>>>> >>>> revision
>>>> >>>>
>>>> >>>>
>>>> >>>> --
>>>> >>>> WBR
>>>> >>>> Maxim aka solomax
>>>> >>
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > WBR
>>>> > Maxim aka solomax
>>>>
>>>
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>>
>
--
WBR
Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Lee Saunders <le...@gmail.com>.
Screenrecording works on my computer. There was a Java problem, but that
seems to have gone.
Is there a way to record audio and the screen at the same time?
On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders <leesenglishlessons@gmail.com
> wrote:
> I hope it works, I need to be able to record the whiteboard sessions for
> my students to review.
>
>
> On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <so...@gmail.com>wrote:
>
>> not sure, haven't tested it
>>
>>
>> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <alexei.fedotov@gmail.com
>> > wrote:
>>
>>> Does red5sip still work with openmeetings when this red5 version is used?
>>> --
>>> With best regards / с наилучшими пожеланиями,
>>> Alexei Fedotov / Алексей Федотов,
>>> http://dataved.ru/
>>> +7 916 562 8095
>>>
>>> [1] Start using Apache Openmeetings today,
>>> http://openmeetings.apache.org/
>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>>
>>>
>>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com>
>>> wrote:
>>> > 2.1.1 have no such issue, it uses another red5 version
>>> >
>>> >
>>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>>> >>
>>> >> The same problem are fixed on 2.1.1?
>>> >>
>>> >> Regards
>>> >>
>>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>> >>
>>> >>> cool
>>> >>> --
>>> >>> With best regards / с наилучшими пожеланиями,
>>> >>> Alexei Fedotov / Алексей Федотов,
>>> >>> http://dataved.ru/
>>> >>> +7 916 562 8095
>>> >>>
>>> >>> [1] Start using Apache Openmeetings today,
>>> >>> http://openmeetings.apache.org/
>>> >>> [2] Join Alexei Fedotov @linkedin,
>>> http://ru.linkedin.com/in/dataved/
>>> >>> [3] Join Alexei Fedotov @facebook,
>>> http://www.facebook.com/openmeetings
>>> >>>
>>> >>>
>>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>>> solomax666@gmail.com>
>>> >>> wrote:
>>> >>>>
>>> >>>> subj.
>>> >>>>
>>> >>>> URL: http://svn.apache.org/r1515875
>>> >>>> Log:
>>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems
>>> to
>>> >>>> work
>>> >>>> as expected
>>> >>>>
>>> >>>>
>>> >>>> I hope screensharing applet will work as expected in 3.0.0 since
>>> this
>>> >>>> revision
>>> >>>>
>>> >>>>
>>> >>>> --
>>> >>>> WBR
>>> >>>> Maxim aka solomax
>>> >>
>>> >>
>>> >
>>> >
>>> >
>>> > --
>>> > WBR
>>> > Maxim aka solomax
>>>
>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>>
>
>
Re: Screensharing seems to be fixed
Posted by Lee Saunders <le...@gmail.com>.
I hope it works, I need to be able to record the whiteboard sessions for my
students to review.
On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik <so...@gmail.com>wrote:
> not sure, haven't tested it
>
>
> On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <al...@gmail.com>wrote:
>
>> Does red5sip still work with openmeetings when this red5 version is used?
>> --
>> With best regards / с наилучшими пожеланиями,
>> Alexei Fedotov / Алексей Федотов,
>> http://dataved.ru/
>> +7 916 562 8095
>>
>> [1] Start using Apache Openmeetings today,
>> http://openmeetings.apache.org/
>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>
>>
>> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com>
>> wrote:
>> > 2.1.1 have no such issue, it uses another red5 version
>> >
>> >
>> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>> >>
>> >> The same problem are fixed on 2.1.1?
>> >>
>> >> Regards
>> >>
>> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
>> >>
>> >>> cool
>> >>> --
>> >>> With best regards / с наилучшими пожеланиями,
>> >>> Alexei Fedotov / Алексей Федотов,
>> >>> http://dataved.ru/
>> >>> +7 916 562 8095
>> >>>
>> >>> [1] Start using Apache Openmeetings today,
>> >>> http://openmeetings.apache.org/
>> >>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>> >>> [3] Join Alexei Fedotov @facebook,
>> http://www.facebook.com/openmeetings
>> >>>
>> >>>
>> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
>> solomax666@gmail.com>
>> >>> wrote:
>> >>>>
>> >>>> subj.
>> >>>>
>> >>>> URL: http://svn.apache.org/r1515875
>> >>>> Log:
>> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems
>> to
>> >>>> work
>> >>>> as expected
>> >>>>
>> >>>>
>> >>>> I hope screensharing applet will work as expected in 3.0.0 since this
>> >>>> revision
>> >>>>
>> >>>>
>> >>>> --
>> >>>> WBR
>> >>>> Maxim aka solomax
>> >>
>> >>
>> >
>> >
>> >
>> > --
>> > WBR
>> > Maxim aka solomax
>>
>
>
>
> --
> WBR
> Maxim aka solomax
>
Re: Screensharing seems to be fixed
Posted by Maxim Solodovnik <so...@gmail.com>.
not sure, haven't tested it
On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov <al...@gmail.com>wrote:
> Does red5sip still work with openmeetings when this red5 version is used?
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
> [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>
>
> On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com>
> wrote:
> > 2.1.1 have no such issue, it uses another red5 version
> >
> >
> > On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
> >>
> >> The same problem are fixed on 2.1.1?
> >>
> >> Regards
> >>
> >> El 20/08/2013 12:14, Alexei Fedotov escribió:
> >>
> >>> cool
> >>> --
> >>> With best regards / с наилучшими пожеланиями,
> >>> Alexei Fedotov / Алексей Федотов,
> >>> http://dataved.ru/
> >>> +7 916 562 8095
> >>>
> >>> [1] Start using Apache Openmeetings today,
> >>> http://openmeetings.apache.org/
> >>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
> >>> [3] Join Alexei Fedotov @facebook,
> http://www.facebook.com/openmeetings
> >>>
> >>>
> >>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <
> solomax666@gmail.com>
> >>> wrote:
> >>>>
> >>>> subj.
> >>>>
> >>>> URL: http://svn.apache.org/r1515875
> >>>> Log:
> >>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to
> >>>> work
> >>>> as expected
> >>>>
> >>>>
> >>>> I hope screensharing applet will work as expected in 3.0.0 since this
> >>>> revision
> >>>>
> >>>>
> >>>> --
> >>>> WBR
> >>>> Maxim aka solomax
> >>
> >>
> >
> >
> >
> > --
> > WBR
> > Maxim aka solomax
>
--
WBR
Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Alexei Fedotov <al...@gmail.com>.
Does red5sip still work with openmeetings when this red5 version is used?
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
[1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
[2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
[3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik <so...@gmail.com> wrote:
> 2.1.1 have no such issue, it uses another red5 version
>
>
> On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
>>
>> The same problem are fixed on 2.1.1?
>>
>> Regards
>>
>> El 20/08/2013 12:14, Alexei Fedotov escribió:
>>
>>> cool
>>> --
>>> With best regards / с наилучшими пожеланиями,
>>> Alexei Fedotov / Алексей Федотов,
>>> http://dataved.ru/
>>> +7 916 562 8095
>>>
>>> [1] Start using Apache Openmeetings today,
>>> http://openmeetings.apache.org/
>>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
>>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>>>
>>>
>>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com>
>>> wrote:
>>>>
>>>> subj.
>>>>
>>>> URL: http://svn.apache.org/r1515875
>>>> Log:
>>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to
>>>> work
>>>> as expected
>>>>
>>>>
>>>> I hope screensharing applet will work as expected in 3.0.0 since this
>>>> revision
>>>>
>>>>
>>>> --
>>>> WBR
>>>> Maxim aka solomax
>>
>>
>
>
>
> --
> WBR
> Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Maxim Solodovnik <so...@gmail.com>.
2.1.1 have no such issue, it uses another red5 version
On Wed, Aug 21, 2013 at 12:26 AM, Bakko <as...@gmail.com> wrote:
> The same problem are fixed on 2.1.1?
>
> Regards
>
> El 20/08/2013 12:14, Alexei Fedotov escribió:
>
> cool
>> --
>> With best regards / с наилучшими пожеланиями,
>> Alexei Fedotov / Алексей Федотов,
>> http://dataved.ru/
>> +7 916 562 8095
>>
>> [1] Start using Apache Openmeetings today, http://openmeetings.apache.**
>> org/ <http://openmeetings.apache.org/>
>> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/**dataved/<http://ru.linkedin.com/in/dataved/>
>> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/**openmeetings<http://www.facebook.com/openmeetings>
>>
>>
>> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com>
>> wrote:
>>
>>> subj.
>>>
>>> URL: http://svn.apache.org/r1515875
>>> Log:
>>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to
>>> work
>>> as expected
>>>
>>>
>>> I hope screensharing applet will work as expected in 3.0.0 since this
>>> revision
>>>
>>>
>>> --
>>> WBR
>>> Maxim aka solomax
>>>
>>
>
--
WBR
Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Bakko <as...@gmail.com>.
The same problem are fixed on 2.1.1?
Regards
El 20/08/2013 12:14, Alexei Fedotov escribió:
> cool
> --
> With best regards / с наилучшими пожеланиями,
> Alexei Fedotov / Алексей Федотов,
> http://dataved.ru/
> +7 916 562 8095
>
> [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
> [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
> [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
>
>
> On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com> wrote:
>> subj.
>>
>> URL: http://svn.apache.org/r1515875
>> Log:
>> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work
>> as expected
>>
>>
>> I hope screensharing applet will work as expected in 3.0.0 since this
>> revision
>>
>>
>> --
>> WBR
>> Maxim aka solomax
Re: Screensharing seems to be fixed
Posted by Alexei Fedotov <al...@gmail.com>.
cool
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
[1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
[2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
[3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com> wrote:
> subj.
>
> URL: http://svn.apache.org/r1515875
> Log:
> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work
> as expected
>
>
> I hope screensharing applet will work as expected in 3.0.0 since this
> revision
>
>
> --
> WBR
> Maxim aka solomax
Re: Aw: Re: Re: Re: Re: Set language files to default value or
replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
I was able to successfully add/remove 3 languages
seems to work as expected
please send me detailed steps in case it doesn't work for you
On Fri, Aug 23, 2013 at 5:54 PM, Maxim Solodovnik <so...@gmail.com>wrote:
> I'll try to doublecheck this and will write you back
> On Aug 23, 2013 3:53 PM, Mathias Bässler <01...@web.de> wrote:
>
>> Good News: It worked!
>> It really were the admin rights, sometimes windows is kinda hard to deal
>> with...
>> Thanks for your help Maxim, that problem really bugged me...
>> An additional question, is it possible to delete an added language?
>> I can have maximum 1 added language, if I add another, the first is
>> overwritten. If I try to delete the added language, nothing happens.
>> (Thats why I tried to delete another language in the first place,
>> unfortunaly that worked...)
>>
>> Gesendet: Freitag, 23. August 2013 um 10:35 Uhr
>> Von: "Maxim Solodovnik" <so...@gmail.com>
>> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
>> Betreff: Re: Re: Re: Re: Set language files to default value or replacing
>> lost ones
>>
>> ok, try to workaround this:
>> open admin.bat
>>
>> replace
>> java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
>> -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
>> org.apache.openmeetings.cli.Admin %*
>> with
>> java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
>> -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
>> org.apache.openmeetings.cli.Admin -v -l
>>
>> run it as admin with no parameters
>>
>> On Fri, Aug 23, 2013 at 3:31 PM, "Mathias Bässler" <01...@web.de>
>> wrote:Thats exactly what I thouhgt and what I did.
>> So I was a little surprised as I found out it doesn't seem to work this
>> way.
>> I discovered it per coincidence: After running admin.bat inside cmd.exe
>> (of course opened it with rclick->"run as admin") I started red5.bat in the
>> same window. As I tried to run OM, it didn't work, I got the same error
>> like when I just double clicked on red5.bat. But I definitely started
>> cmd.exe as admin, even in the title of the cmd-window "Administrator:..."
>> was written. I closed cmd, rclicked red5.bat and run it as admin and OM
>> worked. So the problem remains, if I run admin.bat via cmd.exe it won't
>> start with admin rights, if I start it directly with admin rights it
>> automatically closes after showing the help text without a chance to pass
>> the parameters...
>>
>>
>> Gesendet: Freitag, 23. August 2013 um 09:15 Uhr
>> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
>> An: "Openmeetings user-list" <user@openmeetings.apache.org[
>> user@openmeetings.apache.org]>
>> Betreff: Re: Re: Re: Set language files to default value or replacing
>> lost ones
>>
>> yes, sure
>> find "Command" (cmd.exe) program in your Start menu
>> rclick on it and "run as administrator"
>> then run admin.bat inside this command prompt.
>>
>> On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01001101@web.de[
>> 01001101@web.de]> wrote:I think I found the problem, its in the rights
>> (again).
>> Even if I start the prompt with admin rights, if I execute admin.bat it
>> runs without admin rights, therefore isn't allowed to change OM.
>> But if I run admin.bat via right click -> run with admin rights it only
>> shows the help and closes automatically, without giving me the chance to
>> type the options -v -l. Furthermore I can't activate "run as admin" in the
>> options, its greyed out...
>> Is there a way to start admin.bat with admin rights and pass the
>> parameters?
>>
>> Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
>> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][
>> solomax666@gmail.com[solomax666@gmail.com]]>
>> An: "Openmeetings user-list" <user@openmeetings.apache.org[
>> user@openmeetings.apache.org][user@openmeetings.apache.org[
>> user@openmeetings.apache.org]]>
>> Betreff: Re: Re: Set language files to default value or replacing lost
>> ones
>>
>> just have double checked
>> deleted German (de)
>> then run admin and it was restored
>>
>> Maybe this is because you have deleted language file ...
>> could you please try to restore deleted file from OM distribution and try
>> one more time?
>>
>> On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01001101@web.de[
>> 01001101@web.de][01001101@web.de[01001101@web.de]]> wrote:It looked
>> promising, but didn't work...
>> I forgot to mention, that I deleted the language on my local pc
>> testversion, which runs under windows. So I used admin.bat and did the
>> following:
>>
>> - stopped OM
>> - opened prompt with admin rights
>> - changed to the correct directory
>> - executed "admin -v -l"
>>
>> It looked like it worked, at the end there was the message "All languages
>> are imported" and before that for every of the 32 a message "Lang ADDED".
>> But when I start OM, there are no changes. Another thing, I can't delete
>> a language that I added myself, but I can delete one of the standard
>> languages (yes I deleted another language, which I don't need, on purpose).
>> What did I wrong?
>>
>>
>> Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
>> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][
>> solomax666@gmail.com[solomax666@gmail.com]][solomax666@gmail.com[
>> solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]]]>
>> An: "Openmeetings user-list" <user@openmeetings.apache.org[
>> user@openmeetings.apache.org][user@openmeetings.apache.org[
>> user@openmeetings.apache.org]][user@openmeetings.apache.org[
>> user@openmeetings.apache.org][user@openmeetings.apache.org[
>> user@openmeetings.apache.org]]]>
>> Betreff: Re: Set language files to default value or replacing lost ones
>> You can do it via command line admin.
>> 1) stop om
>> 2) run ./admin.sh -v -l
>>
>> On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de
>> ][01001101@web.de[01001101@web.de]][01001101@web.de[01001101@web.de][
>> 01001101@web.de[01001101@web.de]]]> wrote:Hi,
>>
>> I accidently deleted a language in OM and wanted to reset the files to
>> the way they were after installing OM or at least replace the lost
>> language. But if I add a new one, I can only specify its name and iso code,
>> not the id of the language. Is there a way to add a new language and give
>> it a specific id (then import the correct language file of course) so that
>> it can replace the lost one? Changing language files etc. is done via
>> language editor, but I don't see how it should be done with the editor...
>> --
>> WBR
>> Maxim aka solomax
>> --
>> WBR
>> Maxim aka solomax
>> --
>> WBR
>> Maxim aka solomax
>>
>
--
WBR
Maxim aka solomax
Re: Aw: Re: Re: Re: Re: Set language files to default value or
replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
I'll try to doublecheck this and will write you back
On Aug 23, 2013 3:53 PM, Mathias Bässler <01...@web.de> wrote:
> Good News: It worked!
> It really were the admin rights, sometimes windows is kinda hard to deal
> with...
> Thanks for your help Maxim, that problem really bugged me...
> An additional question, is it possible to delete an added language?
> I can have maximum 1 added language, if I add another, the first is
> overwritten. If I try to delete the added language, nothing happens.
> (Thats why I tried to delete another language in the first place,
> unfortunaly that worked...)
>
> Gesendet: Freitag, 23. August 2013 um 10:35 Uhr
> Von: "Maxim Solodovnik" <so...@gmail.com>
> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
> Betreff: Re: Re: Re: Re: Set language files to default value or replacing
> lost ones
>
> ok, try to workaround this:
> open admin.bat
>
> replace
> java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
> -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
> org.apache.openmeetings.cli.Admin %*
> with
> java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
> -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
> org.apache.openmeetings.cli.Admin -v -l
>
> run it as admin with no parameters
>
> On Fri, Aug 23, 2013 at 3:31 PM, "Mathias Bässler" <01...@web.de>
> wrote:Thats exactly what I thouhgt and what I did.
> So I was a little surprised as I found out it doesn't seem to work this
> way.
> I discovered it per coincidence: After running admin.bat inside cmd.exe
> (of course opened it with rclick->"run as admin") I started red5.bat in the
> same window. As I tried to run OM, it didn't work, I got the same error
> like when I just double clicked on red5.bat. But I definitely started
> cmd.exe as admin, even in the title of the cmd-window "Administrator:..."
> was written. I closed cmd, rclicked red5.bat and run it as admin and OM
> worked. So the problem remains, if I run admin.bat via cmd.exe it won't
> start with admin rights, if I start it directly with admin rights it
> automatically closes after showing the help text without a chance to pass
> the parameters...
>
>
> Gesendet: Freitag, 23. August 2013 um 09:15 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org]>
> Betreff: Re: Re: Re: Set language files to default value or replacing lost
> ones
>
> yes, sure
> find "Command" (cmd.exe) program in your Start menu
> rclick on it and "run as administrator"
> then run admin.bat inside this command prompt.
>
> On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01001101@web.de[
> 01001101@web.de]> wrote:I think I found the problem, its in the rights
> (again).
> Even if I start the prompt with admin rights, if I execute admin.bat it
> runs without admin rights, therefore isn't allowed to change OM.
> But if I run admin.bat via right click -> run with admin rights it only
> shows the help and closes automatically, without giving me the chance to
> type the options -v -l. Furthermore I can't activate "run as admin" in the
> options, its greyed out...
> Is there a way to start admin.bat with admin rights and pass the
> parameters?
>
> Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][
> solomax666@gmail.com[solomax666@gmail.com]]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org][user@openmeetings.apache.org[
> user@openmeetings.apache.org]]>
> Betreff: Re: Re: Set language files to default value or replacing lost ones
>
> just have double checked
> deleted German (de)
> then run admin and it was restored
>
> Maybe this is because you have deleted language file ...
> could you please try to restore deleted file from OM distribution and try
> one more time?
>
> On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01001101@web.de[
> 01001101@web.de][01001101@web.de[01001101@web.de]]> wrote:It looked
> promising, but didn't work...
> I forgot to mention, that I deleted the language on my local pc
> testversion, which runs under windows. So I used admin.bat and did the
> following:
>
> - stopped OM
> - opened prompt with admin rights
> - changed to the correct directory
> - executed "admin -v -l"
>
> It looked like it worked, at the end there was the message "All languages
> are imported" and before that for every of the 32 a message "Lang ADDED".
> But when I start OM, there are no changes. Another thing, I can't delete a
> language that I added myself, but I can delete one of the standard
> languages (yes I deleted another language, which I don't need, on purpose).
> What did I wrong?
>
>
> Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][
> solomax666@gmail.com[solomax666@gmail.com]][solomax666@gmail.com[
> solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]]]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org][user@openmeetings.apache.org[
> user@openmeetings.apache.org]][user@openmeetings.apache.org[
> user@openmeetings.apache.org][user@openmeetings.apache.org[
> user@openmeetings.apache.org]]]>
> Betreff: Re: Set language files to default value or replacing lost ones
> You can do it via command line admin.
> 1) stop om
> 2) run ./admin.sh -v -l
>
> On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de
> ][01001101@web.de[01001101@web.de]][01001101@web.de[01001101@web.de][
> 01001101@web.de[01001101@web.de]]]> wrote:Hi,
>
> I accidently deleted a language in OM and wanted to reset the files to the
> way they were after installing OM or at least replace the lost language.
> But if I add a new one, I can only specify its name and iso code, not the
> id of the language. Is there a way to add a new language and give it a
> specific id (then import the correct language file of course) so that it
> can replace the lost one? Changing language files etc. is done via language
> editor, but I don't see how it should be done with the editor...
> --
> WBR
> Maxim aka solomax
> --
> WBR
> Maxim aka solomax
> --
> WBR
> Maxim aka solomax
>
Aw: Re: Re: Re: Re: Set language files to default value or
replacing lost ones
Posted by Mathias Bässler <01...@web.de>.
Good News: It worked!
It really were the admin rights, sometimes windows is kinda hard to deal with...
Thanks for your help Maxim, that problem really bugged me...
An additional question, is it possible to delete an added language?
I can have maximum 1 added language, if I add another, the first is overwritten. If I try to delete the added language, nothing happens.
(Thats why I tried to delete another language in the first place, unfortunaly that worked...)
Gesendet: Freitag, 23. August 2013 um 10:35 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Re: Re: Re: Set language files to default value or replacing lost ones
ok, try to workaround this:
open admin.bat
replace
java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT% -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector org.apache.openmeetings.cli.Admin %*
with
java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT% -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector org.apache.openmeetings.cli.Admin -v -l
run it as admin with no parameters
On Fri, Aug 23, 2013 at 3:31 PM, "Mathias Bässler" <01...@web.de> wrote:Thats exactly what I thouhgt and what I did.
So I was a little surprised as I found out it doesn't seem to work this way.
I discovered it per coincidence: After running admin.bat inside cmd.exe (of course opened it with rclick->"run as admin") I started red5.bat in the same window. As I tried to run OM, it didn't work, I got the same error like when I just double clicked on red5.bat. But I definitely started cmd.exe as admin, even in the title of the cmd-window "Administrator:..." was written. I closed cmd, rclicked red5.bat and run it as admin and OM worked. So the problem remains, if I run admin.bat via cmd.exe it won't start with admin rights, if I start it directly with admin rights it automatically closes after showing the help text without a chance to pass the parameters...
Gesendet: Freitag, 23. August 2013 um 09:15 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org]>
Betreff: Re: Re: Re: Set language files to default value or replacing lost ones
yes, sure
find "Command" (cmd.exe) program in your Start menu
rclick on it and "run as administrator"
then run admin.bat inside this command prompt.
On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01001101@web.de[01001101@web.de]> wrote:I think I found the problem, its in the rights (again).
Even if I start the prompt with admin rights, if I execute admin.bat it runs without admin rights, therefore isn't allowed to change OM.
But if I run admin.bat via right click -> run with admin rights it only shows the help and closes automatically, without giving me the chance to type the options -v -l. Furthermore I can't activate "run as admin" in the options, its greyed out...
Is there a way to start admin.bat with admin rights and pass the parameters?
Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org][user@openmeetings.apache.org[user@openmeetings.apache.org]]>
Betreff: Re: Re: Set language files to default value or replacing lost ones
just have double checked
deleted German (de)
then run admin and it was restored
Maybe this is because you have deleted language file ...
could you please try to restore deleted file from OM distribution and try one more time?
On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01001101@web.de[01001101@web.de][01001101@web.de[01001101@web.de]]> wrote:It looked promising, but didn't work...
I forgot to mention, that I deleted the language on my local pc testversion, which runs under windows. So I used admin.bat and did the following:
- stopped OM
- opened prompt with admin rights
- changed to the correct directory
- executed "admin -v -l"
It looked like it worked, at the end there was the message "All languages are imported" and before that for every of the 32 a message "Lang ADDED".
But when I start OM, there are no changes. Another thing, I can't delete a language that I added myself, but I can delete one of the standard languages (yes I deleted another language, which I don't need, on purpose).
What did I wrong?
Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]][solomax666@gmail.com[solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]]]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org][user@openmeetings.apache.org[user@openmeetings.apache.org]][user@openmeetings.apache.org[user@openmeetings.apache.org][user@openmeetings.apache.org[user@openmeetings.apache.org]]]>
Betreff: Re: Set language files to default value or replacing lost ones
You can do it via command line admin.
1) stop om
2) run ./admin.sh -v -l
On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de][01001101@web.de[01001101@web.de]][01001101@web.de[01001101@web.de][01001101@web.de[01001101@web.de]]]> wrote:Hi,
I accidently deleted a language in OM and wanted to reset the files to the way they were after installing OM or at least replace the lost language. But if I add a new one, I can only specify its name and iso code, not the id of the language. Is there a way to add a new language and give it a specific id (then import the correct language file of course) so that it can replace the lost one? Changing language files etc. is done via language editor, but I don't see how it should be done with the editor...
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
Re: Re: Re: Re: Set language files to default value or replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
ok, try to workaround this:
open admin.bat
replace
java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
-Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
org.apache.openmeetings.cli.Admin %*
with
java -cp "%CLASSPATH%" -Dcontext=%OM_CONTEXT%
-Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector
org.apache.openmeetings.cli.Admin -v -l
run it as admin with no parameters
On Fri, Aug 23, 2013 at 3:31 PM, "Mathias Bässler" <01...@web.de> wrote:
> Thats exactly what I thouhgt and what I did.
> So I was a little surprised as I found out it doesn't seem to work this
> way.
> I discovered it per coincidence: After running admin.bat inside cmd.exe
> (of course opened it with rclick->"run as admin") I started red5.bat in the
> same window. As I tried to run OM, it didn't work, I got the same error
> like when I just double clicked on red5.bat. But I definitely started
> cmd.exe as admin, even in the title of the cmd-window "Administrator:..."
> was written. I closed cmd, rclicked red5.bat and run it as admin and OM
> worked. So the problem remains, if I run admin.bat via cmd.exe it won't
> start with admin rights, if I start it directly with admin rights it
> automatically closes after showing the help text without a chance to pass
> the parameters...
>
>
> Gesendet: Freitag, 23. August 2013 um 09:15 Uhr
> Von: "Maxim Solodovnik" <so...@gmail.com>
> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
> Betreff: Re: Re: Re: Set language files to default value or replacing lost
> ones
>
> yes, sure
> find "Command" (cmd.exe) program in your Start menu
> rclick on it and "run as administrator"
> then run admin.bat inside this command prompt.
>
> On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01...@web.de>
> wrote:I think I found the problem, its in the rights (again).
> Even if I start the prompt with admin rights, if I execute admin.bat it
> runs without admin rights, therefore isn't allowed to change OM.
> But if I run admin.bat via right click -> run with admin rights it only
> shows the help and closes automatically, without giving me the chance to
> type the options -v -l. Furthermore I can't activate "run as admin" in the
> options, its greyed out...
> Is there a way to start admin.bat with admin rights and pass the
> parameters?
>
> Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org]>
> Betreff: Re: Re: Set language files to default value or replacing lost ones
>
> just have double checked
> deleted German (de)
> then run admin and it was restored
>
> Maybe this is because you have deleted language file ...
> could you please try to restore deleted file from OM distribution and try
> one more time?
>
> On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01001101@web.de[
> 01001101@web.de]> wrote:It looked promising, but didn't work...
> I forgot to mention, that I deleted the language on my local pc
> testversion, which runs under windows. So I used admin.bat and did the
> following:
>
> - stopped OM
> - opened prompt with admin rights
> - changed to the correct directory
> - executed "admin -v -l"
>
> It looked like it worked, at the end there was the message "All languages
> are imported" and before that for every of the 32 a message "Lang ADDED".
> But when I start OM, there are no changes. Another thing, I can't delete a
> language that I added myself, but I can delete one of the standard
> languages (yes I deleted another language, which I don't need, on purpose).
> What did I wrong?
>
>
> Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][
> solomax666@gmail.com[solomax666@gmail.com]]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org][user@openmeetings.apache.org[
> user@openmeetings.apache.org]]>
> Betreff: Re: Set language files to default value or replacing lost ones
> You can do it via command line admin.
> 1) stop om
> 2) run ./admin.sh -v -l
>
> On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de
> ][01001101@web.de[01001101@web.de]]> wrote:Hi,
>
> I accidently deleted a language in OM and wanted to reset the files to the
> way they were after installing OM or at least replace the lost language.
> But if I add a new one, I can only specify its name and iso code, not the
> id of the language. Is there a way to add a new language and give it a
> specific id (then import the correct language file of course) so that it
> can replace the lost one? Changing language files etc. is done via language
> editor, but I don't see how it should be done with the editor...
> --
> WBR
> Maxim aka solomax
> --
> WBR
> Maxim aka solomax
>
--
WBR
Maxim aka solomax
Aw: Re: Re: Re: Set language files to default value or replacing
lost ones
Posted by Mathias Bässler <01...@web.de>.
Thats exactly what I thouhgt and what I did.
So I was a little surprised as I found out it doesn't seem to work this way.
I discovered it per coincidence: After running admin.bat inside cmd.exe (of course opened it with rclick->"run as admin") I started red5.bat in the same window. As I tried to run OM, it didn't work, I got the same error like when I just double clicked on red5.bat. But I definitely started cmd.exe as admin, even in the title of the cmd-window "Administrator:..." was written. I closed cmd, rclicked red5.bat and run it as admin and OM worked. So the problem remains, if I run admin.bat via cmd.exe it won't start with admin rights, if I start it directly with admin rights it automatically closes after showing the help text without a chance to pass the parameters...
Gesendet: Freitag, 23. August 2013 um 09:15 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Re: Re: Set language files to default value or replacing lost ones
yes, sure
find "Command" (cmd.exe) program in your Start menu
rclick on it and "run as administrator"
then run admin.bat inside this command prompt.
On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01...@web.de> wrote:I think I found the problem, its in the rights (again).
Even if I start the prompt with admin rights, if I execute admin.bat it runs without admin rights, therefore isn't allowed to change OM.
But if I run admin.bat via right click -> run with admin rights it only shows the help and closes automatically, without giving me the chance to type the options -v -l. Furthermore I can't activate "run as admin" in the options, its greyed out...
Is there a way to start admin.bat with admin rights and pass the parameters?
Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org]>
Betreff: Re: Re: Set language files to default value or replacing lost ones
just have double checked
deleted German (de)
then run admin and it was restored
Maybe this is because you have deleted language file ...
could you please try to restore deleted file from OM distribution and try one more time?
On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01001101@web.de[01001101@web.de]> wrote:It looked promising, but didn't work...
I forgot to mention, that I deleted the language on my local pc testversion, which runs under windows. So I used admin.bat and did the following:
- stopped OM
- opened prompt with admin rights
- changed to the correct directory
- executed "admin -v -l"
It looked like it worked, at the end there was the message "All languages are imported" and before that for every of the 32 a message "Lang ADDED".
But when I start OM, there are no changes. Another thing, I can't delete a language that I added myself, but I can delete one of the standard languages (yes I deleted another language, which I don't need, on purpose).
What did I wrong?
Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com][solomax666@gmail.com[solomax666@gmail.com]]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org][user@openmeetings.apache.org[user@openmeetings.apache.org]]>
Betreff: Re: Set language files to default value or replacing lost ones
You can do it via command line admin.
1) stop om
2) run ./admin.sh -v -l
On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de][01001101@web.de[01001101@web.de]]> wrote:Hi,
I accidently deleted a language in OM and wanted to reset the files to the way they were after installing OM or at least replace the lost language. But if I add a new one, I can only specify its name and iso code, not the id of the language. Is there a way to add a new language and give it a specific id (then import the correct language file of course) so that it can replace the lost one? Changing language files etc. is done via language editor, but I don't see how it should be done with the editor...
--
WBR
Maxim aka solomax
--
WBR
Maxim aka solomax
Re: Re: Re: Set language files to default value or replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
yes, sure
find "Command" (cmd.exe) program in your Start menu
rclick on it and "run as administrator"
then run admin.bat inside this command prompt.
On Fri, Aug 23, 2013 at 2:06 PM, "Mathias Bässler" <01...@web.de> wrote:
> I think I found the problem, its in the rights (again).
> Even if I start the prompt with admin rights, if I execute admin.bat it
> runs without admin rights, therefore isn't allowed to change OM.
> But if I run admin.bat via right click -> run with admin rights it only
> shows the help and closes automatically, without giving me the chance to
> type the options -v -l. Furthermore I can't activate "run as admin" in the
> options, its greyed out...
> Is there a way to start admin.bat with admin rights and pass the
> parameters?
>
> Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
> Von: "Maxim Solodovnik" <so...@gmail.com>
> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
> Betreff: Re: Re: Set language files to default value or replacing lost ones
>
> just have double checked
> deleted German (de)
> then run admin and it was restored
>
> Maybe this is because you have deleted language file ...
> could you please try to restore deleted file from OM distribution and try
> one more time?
>
> On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01...@web.de>
> wrote:It looked promising, but didn't work...
> I forgot to mention, that I deleted the language on my local pc
> testversion, which runs under windows. So I used admin.bat and did the
> following:
>
> - stopped OM
> - opened prompt with admin rights
> - changed to the correct directory
> - executed "admin -v -l"
>
> It looked like it worked, at the end there was the message "All languages
> are imported" and before that for every of the 32 a message "Lang ADDED".
> But when I start OM, there are no changes. Another thing, I can't delete a
> language that I added myself, but I can delete one of the standard
> languages (yes I deleted another language, which I don't need, on purpose).
> What did I wrong?
>
>
> Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
> Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
> An: "Openmeetings user-list" <user@openmeetings.apache.org[
> user@openmeetings.apache.org]>
> Betreff: Re: Set language files to default value or replacing lost ones
> You can do it via command line admin.
> 1) stop om
> 2) run ./admin.sh -v -l
>
> On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de]>
> wrote:Hi,
>
> I accidently deleted a language in OM and wanted to reset the files to the
> way they were after installing OM or at least replace the lost language.
> But if I add a new one, I can only specify its name and iso code, not the
> id of the language. Is there a way to add a new language and give it a
> specific id (then import the correct language file of course) so that it
> can replace the lost one? Changing language files etc. is done via language
> editor, but I don't see how it should be done with the editor...
> --
> WBR
> Maxim aka solomax
>
--
WBR
Maxim aka solomax
Aw: Re: Re: Set language files to default value or replacing lost
ones
Posted by Mathias Bässler <01...@web.de>.
I think I found the problem, its in the rights (again).
Even if I start the prompt with admin rights, if I execute admin.bat it runs without admin rights, therefore isn't allowed to change OM.
But if I run admin.bat via right click -> run with admin rights it only shows the help and closes automatically, without giving me the chance to type the options -v -l. Furthermore I can't activate "run as admin" in the options, its greyed out...
Is there a way to start admin.bat with admin rights and pass the parameters?
Gesendet: Freitag, 23. August 2013 um 06:01 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Re: Set language files to default value or replacing lost ones
just have double checked
deleted German (de)
then run admin and it was restored
Maybe this is because you have deleted language file ...
could you please try to restore deleted file from OM distribution and try one more time?
On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01...@web.de> wrote:It looked promising, but didn't work...
I forgot to mention, that I deleted the language on my local pc testversion, which runs under windows. So I used admin.bat and did the following:
- stopped OM
- opened prompt with admin rights
- changed to the correct directory
- executed "admin -v -l"
It looked like it worked, at the end there was the message "All languages are imported" and before that for every of the 32 a message "Lang ADDED".
But when I start OM, there are no changes. Another thing, I can't delete a language that I added myself, but I can delete one of the standard languages (yes I deleted another language, which I don't need, on purpose).
What did I wrong?
Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org]>
Betreff: Re: Set language files to default value or replacing lost ones
You can do it via command line admin.
1) stop om
2) run ./admin.sh -v -l
On Aug 22, 2013 8:20 PM, Mathias Bässler <01001101@web.de[01001101@web.de]> wrote:Hi,
I accidently deleted a language in OM and wanted to reset the files to the way they were after installing OM or at least replace the lost language. But if I add a new one, I can only specify its name and iso code, not the id of the language. Is there a way to add a new language and give it a specific id (then import the correct language file of course) so that it can replace the lost one? Changing language files etc. is done via language editor, but I don't see how it should be done with the editor...
--
WBR
Maxim aka solomax
Re: Re: Set language files to default value or replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
just have double checked
deleted German (de)
then run admin and it was restored
Maybe this is because you have deleted language file ...
could you please try to restore deleted file from OM distribution and try
one more time?
On Thu, Aug 22, 2013 at 10:14 PM, "Mathias Bässler" <01...@web.de> wrote:
> It looked promising, but didn't work...
> I forgot to mention, that I deleted the language on my local pc
> testversion, which runs under windows. So I used admin.bat and did the
> following:
>
> - stopped OM
> - opened prompt with admin rights
> - changed to the correct directory
> - executed "admin -v -l"
>
> It looked like it worked, at the end there was the message "All languages
> are imported" and before that for every of the 32 a message "Lang ADDED".
> But when I start OM, there are no changes. Another thing, I can't delete a
> language that I added myself, but I can delete one of the standard
> languages (yes I deleted another language, which I don't need, on purpose).
> What did I wrong?
>
>
> Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
> Von: "Maxim Solodovnik" <so...@gmail.com>
> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
> Betreff: Re: Set language files to default value or replacing lost ones
> You can do it via command line admin.
> 1) stop om
> 2) run ./admin.sh -v -l
>
> On Aug 22, 2013 8:20 PM, Mathias Bässler <01...@web.de> wrote:Hi,
>
> I accidently deleted a language in OM and wanted to reset the files to the
> way they were after installing OM or at least replace the lost language.
> But if I add a new one, I can only specify its name and iso code, not the
> id of the language. Is there a way to add a new language and give it a
> specific id (then import the correct language file of course) so that it
> can replace the lost one? Changing language files etc. is done via language
> editor, but I don't see how it should be done with the editor...
>
--
WBR
Maxim aka solomax
Aw: Re: Set language files to default value or replacing lost ones
Posted by Mathias Bässler <01...@web.de>.
It looked promising, but didn't work...
I forgot to mention, that I deleted the language on my local pc testversion, which runs under windows. So I used admin.bat and did the following:
- stopped OM
- opened prompt with admin rights
- changed to the correct directory
- executed "admin -v -l"
It looked like it worked, at the end there was the message "All languages are imported" and before that for every of the 32 a message "Lang ADDED".
But when I start OM, there are no changes. Another thing, I can't delete a language that I added myself, but I can delete one of the standard languages (yes I deleted another language, which I don't need, on purpose).
What did I wrong?
Gesendet: Donnerstag, 22. August 2013 um 15:56 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Set language files to default value or replacing lost ones
You can do it via command line admin.
1) stop om
2) run ./admin.sh -v -l
On Aug 22, 2013 8:20 PM, Mathias Bässler <01...@web.de> wrote:Hi,
I accidently deleted a language in OM and wanted to reset the files to the way they were after installing OM or at least replace the lost language. But if I add a new one, I can only specify its name and iso code, not the id of the language. Is there a way to add a new language and give it a specific id (then import the correct language file of course) so that it can replace the lost one? Changing language files etc. is done via language editor, but I don't see how it should be done with the editor...
Re: Set language files to default value or replacing lost ones
Posted by Maxim Solodovnik <so...@gmail.com>.
You can do it via command line admin.
1) stop om
2) run ./admin.sh -v -l
On Aug 22, 2013 8:20 PM, Mathias Bässler <01...@web.de> wrote:
> Hi,
>
> I accidently deleted a language in OM and wanted to reset the files to the
> way they were after installing OM or at least replace the lost language.
> But if I add a new one, I can only specify its name and iso code, not the
> id of the language. Is there a way to add a new language and give it a
> specific id (then import the correct language file of course) so that it
> can replace the lost one? Changing language files etc. is done via language
> editor, but I don't see how it should be done with the editor...
>
Set language files to default value or replacing lost ones
Posted by Mathias Bässler <01...@web.de>.
Hi,
I accidently deleted a language in OM and wanted to reset the files to the way they were after installing OM or at least replace the lost language. But if I add a new one, I can only specify its name and iso code, not the id of the language. Is there a way to add a new language and give it a specific id (then import the correct language file of course) so that it can replace the lost one? Changing language files etc. is done via language editor, but I don't see how it should be done with the editor...
[Solved] Can't upload language file
Posted by Mathias Bässler <01...@web.de>.
Ok, found the problem. It seems the access permissions weren't set correctly and so the system couldn't upload the file.
Changed the permissions and it works now. Thanks!
Gesendet: Donnerstag, 22. August 2013 um 11:10 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Aw: Re: Can't upload language file
Could you run red5-debug.sh and inspect console output while language upload?
On Aug 22, 2013 4:06 PM, Mathias Bässler <01...@web.de> wrote:There were no significant changes in the error/openmeetings.log when I tried to upload the file, only the red5.log.
I tried again, the only messages I got from openmeetings.log while trying to upload were:
DEBUG 08-22 10: 44:48.598 o.a.o.q.s.MeetingReminderJob:34 [org.springframework.scheduling.quartz .SchedulerFactoryBean#0_Worker-9] - MeetingReminderJob.execute
DEBUG 08-22 10:44:48.604 o.a.o.d.c.d.AppointmentDao:929 [org.springframework.sch eduling.quartz.SchedulerFactoryBean#0_Worker-9] - startStamp 2013-08-22 10:44:48 .604
DEBUG 08-22 10:44:48.605 o.a.o.d.c.d.AppointmentDao:930 [org.springframework.sch eduling.quartz.SchedulerFactoryBean#0_Worker-9] - stopStamp 2013-08-22 10:59:48. 604
DEBUG 08-22 10:44:48.611 o.a.o.d.c.m.AppointmentLogic:423 [org.springframework.s cheduling.quartz.SchedulerFactoryBean#0_Worker-9] - doScheduledMeetingReminder :no Appointments in range
Gesendet: Donnerstag, 22. August 2013 um 10:46 Uhr
Von: "Maxim Solodovnik" <solomax666@gmail.com[solomax666@gmail.com]>
An: "Openmeetings user-list" <user@openmeetings.apache.org[user@openmeetings.apache.org]>
Betreff: Re: Can't upload language file
Could you also share part of ooenmeetings.log?
On Aug 22, 2013 3:32 PM, Mathias Bässler <01001101@web.de[01001101@web.de]> wrote:Hi,
I put OM (Version 2.1.1) on a testserver without a firewall. I have modified some texts in the language files of OM and wanted to upload the files via the language editor in the administration panel. If I try to do so, it throws a http-error 500 and I don't really know how to fix this. It seems the requested file can't be found...? I attached the affiliated part of the logfile, hope it helps.
Thanks in advance!
Re: Aw: Re: Can't upload language file
Posted by Maxim Solodovnik <so...@gmail.com>.
Could you run red5-debug.sh and inspect console output while language
upload?
On Aug 22, 2013 4:06 PM, Mathias Bässler <01...@web.de> wrote:
> There were no significant changes in the error/openmeetings.log when I
> tried to upload the file, only the red5.log.
> I tried again, the only messages I got from openmeetings.log while trying
> to upload were:
>
> DEBUG 08-22 10:
> 44:48.598
> o.a.o.q.s.MeetingReminderJob:34 [org.springframework.scheduling.quartz
>
> .SchedulerFactoryBean#0_Worker-9] -
> MeetingReminderJob.execute
> DEBUG 08-22 10:44:48.604 o.a.o.d.c.d.AppointmentDao:929
> [org.springframework.sch
>
> eduling.quartz.SchedulerFactoryBean#0_Worker-9] - startStamp 2013-08-22
> 10:44:48
> .604
> DEBUG 08-22 10:44:48.605 o.a.o.d.c.d.AppointmentDao:930
> [org.springframework.sch
>
> eduling.quartz.SchedulerFactoryBean#0_Worker-9] - stopStamp 2013-08-22
> 10:59:48.
> 604
> DEBUG 08-22 10:44:48.611 o.a.o.d.c.m.AppointmentLogic:423
> [org.springframework.s
>
> cheduling.quartz.SchedulerFactoryBean#0_Worker-9] -
> doScheduledMeetingReminder :no Appointments in range
>
>
>
> Gesendet: Donnerstag, 22. August 2013 um 10:46 Uhr
> Von: "Maxim Solodovnik" <so...@gmail.com>
> An: "Openmeetings user-list" <us...@openmeetings.apache.org>
> Betreff: Re: Can't upload language file
> Could you also share part of ooenmeetings.log?
>
> On Aug 22, 2013 3:32 PM, Mathias Bässler <01...@web.de> wrote:Hi,
>
> I put OM (Version 2.1.1) on a testserver without a firewall. I have
> modified some texts in the language files of OM and wanted to upload the
> files via the language editor in the administration panel. If I try to do
> so, it throws a http-error 500 and I don't really know how to fix this. It
> seems the requested file can't be found...? I attached the affiliated part
> of the logfile, hope it helps.
>
> Thanks in advance!
>
Aw: Re: Can't upload language file
Posted by Mathias Bässler <01...@web.de>.
There were no significant changes in the error/openmeetings.log when I tried to upload the file, only the red5.log.
I tried again, the only messages I got from openmeetings.log while trying to upload were:
DEBUG 08-22 10: 44:48.598 o.a.o.q.s.MeetingReminderJob:34 [org.springframework.scheduling.quartz .SchedulerFactoryBean#0_Worker-9] - MeetingReminderJob.execute
DEBUG 08-22 10:44:48.604 o.a.o.d.c.d.AppointmentDao:929 [org.springframework.sch eduling.quartz.SchedulerFactoryBean#0_Worker-9] - startStamp 2013-08-22 10:44:48 .604
DEBUG 08-22 10:44:48.605 o.a.o.d.c.d.AppointmentDao:930 [org.springframework.sch eduling.quartz.SchedulerFactoryBean#0_Worker-9] - stopStamp 2013-08-22 10:59:48. 604
DEBUG 08-22 10:44:48.611 o.a.o.d.c.m.AppointmentLogic:423 [org.springframework.s cheduling.quartz.SchedulerFactoryBean#0_Worker-9] - doScheduledMeetingReminder :no Appointments in range
Gesendet: Donnerstag, 22. August 2013 um 10:46 Uhr
Von: "Maxim Solodovnik" <so...@gmail.com>
An: "Openmeetings user-list" <us...@openmeetings.apache.org>
Betreff: Re: Can't upload language file
Could you also share part of ooenmeetings.log?
On Aug 22, 2013 3:32 PM, Mathias Bässler <01...@web.de> wrote:Hi,
I put OM (Version 2.1.1) on a testserver without a firewall. I have modified some texts in the language files of OM and wanted to upload the files via the language editor in the administration panel. If I try to do so, it throws a http-error 500 and I don't really know how to fix this. It seems the requested file can't be found...? I attached the affiliated part of the logfile, hope it helps.
Thanks in advance!
Re: Can't upload language file
Posted by Maxim Solodovnik <so...@gmail.com>.
Could you also share part of ooenmeetings.log?
On Aug 22, 2013 3:32 PM, Mathias Bässler <01...@web.de> wrote:
> Hi,
>
> I put OM (Version 2.1.1) on a testserver without a firewall. I have
> modified some texts in the language files of OM and wanted to upload the
> files via the language editor in the administration panel. If I try to do
> so, it throws a http-error 500 and I don't really know how to fix this. It
> seems the requested file can't be found...? I attached the affiliated part
> of the logfile, hope it helps.
>
> Thanks in advance!
Can't upload language file
Posted by Mathias Bässler <01...@web.de>.
Hi,
I put OM (Version 2.1.1) on a testserver without a firewall. I have modified some texts in the language files of OM and wanted to upload the files via the language editor in the administration panel. If I try to do so, it throws a http-error 500 and I don't really know how to fix this. It seems the requested file can't be found...? I attached the affiliated part of the logfile, hope it helps.
Thanks in advance!
Re: Screensharing seems to be fixed
Posted by Alexei Fedotov <al...@gmail.com>.
cool
--
With best regards / с наилучшими пожеланиями,
Alexei Fedotov / Алексей Федотов,
http://dataved.ru/
+7 916 562 8095
[1] Start using Apache Openmeetings today, http://openmeetings.apache.org/
[2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/
[3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings
On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik <so...@gmail.com> wrote:
> subj.
>
> URL: http://svn.apache.org/r1515875
> Log:
> [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work
> as expected
>
>
> I hope screensharing applet will work as expected in 3.0.0 since this
> revision
>
>
> --
> WBR
> Maxim aka solomax