You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@manifoldcf.apache.org by Karl Wright <da...@gmail.com> on 2018/04/15 17:30:05 UTC
[VOTE] Release ManifoldCF 2.10, RC0
Please vote on whether to release ManifoldCF 2.10, RC0.
The release artifacts can be found at
https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10 .
There is also a release tag at
https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0 .
This release contains a number of fixes and new features. These are
summarized in
https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10/CHANGES.txt
.
Thanks,
Karl
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Irindu Nugawela <nb...@gmail.com>.
I have build and ran the tests +1 from me
> On Apr 16, 2018, at 6:49 PM, Furkan KAMACI <fu...@gmail.com> wrote:
>
> +1 from me too.
>
> On Mon, Apr 16, 2018 at 4:17 PM, Piergiorgio Lucidi <pi...@apache.org>
> wrote:
>
>> +1 from me.
>>
>> I don't see any issue, I have just ran tests and if I try to run the
>> distribution built from the source code, I see all the connectors correctly
>> registered.
>>
>> PJ
>>
>> 2018-04-16 13:01 GMT+02:00 Karl Wright <da...@gmail.com>:
>>
>>> Everything looks good here, but I did notice that our copyright notice
>>> needs to be updated to 2018. I'll commit that in case we really do need
>> to
>>> spin another RC.
>>>
>>> Karl
>>>
>>>
>>>> On Mon, Apr 16, 2018 at 6:52 AM, Rafa Haro <rh...@apache.org> wrote:
>>>>
>>>> my own build yes
>>>>
>>>> On Mon, Apr 16, 2018 at 12:23 PM Karl Wright <da...@gmail.com>
>> wrote:
>>>>
>>>>> hmm, I can't seem to reproduce this.
>>>>>
>>>>> This was your own build, not the binary?
>>>>>
>>>>> Karl
>>>>>
>>>>>> On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
>>>>>>
>>>>>> Not sure if it is an issue but:
>>>>>>
>>>>>> I have downloaded source code, built with maven and ant without
>>>> problems.
>>>>>> Then I started the system at dist/example/start.sh. After starting
>>> up I
>>>>>> couldn't configure any connector getting always the message "No
>>>>> connectors
>>>>>> registered". Nothing in the logs
>>>>>>
>>>>>> On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com>
>>>> wrote:
>>>>>>
>>>>>>> Please vote on whether to release ManifoldCF 2.10, RC0.
>>>>>>>
>>>>>>> The release artifacts can be found at
>>>>>>>
>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-man
>>> ifoldcf-2.10
>>>>>> .
>>>>>>> There is also a release tag at
>>>>>>> https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.
>> 10-RC0
>>> .
>>>>>>>
>>>>>>> This release contains a number of fixes and new features. These
>>> are
>>>>>>> summarized in
>>>>>>>
>>>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
>>>>>> manifoldcf-2.10/CHANGES.txt
>>>>>>> .
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Karl
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>>
>>
>> --
>> Piergiorgio Lucidi
>> https://www.open4dev.com
>>
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Furkan KAMACI <fu...@gmail.com>.
+1 from me too.
On Mon, Apr 16, 2018 at 4:17 PM, Piergiorgio Lucidi <pi...@apache.org>
wrote:
> +1 from me.
>
> I don't see any issue, I have just ran tests and if I try to run the
> distribution built from the source code, I see all the connectors correctly
> registered.
>
> PJ
>
> 2018-04-16 13:01 GMT+02:00 Karl Wright <da...@gmail.com>:
>
> > Everything looks good here, but I did notice that our copyright notice
> > needs to be updated to 2018. I'll commit that in case we really do need
> to
> > spin another RC.
> >
> > Karl
> >
> >
> > On Mon, Apr 16, 2018 at 6:52 AM, Rafa Haro <rh...@apache.org> wrote:
> >
> > > my own build yes
> > >
> > > On Mon, Apr 16, 2018 at 12:23 PM Karl Wright <da...@gmail.com>
> wrote:
> > >
> > > > hmm, I can't seem to reproduce this.
> > > >
> > > > This was your own build, not the binary?
> > > >
> > > > Karl
> > > >
> > > > On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
> > > >
> > > > > Not sure if it is an issue but:
> > > > >
> > > > > I have downloaded source code, built with maven and ant without
> > > problems.
> > > > > Then I started the system at dist/example/start.sh. After starting
> > up I
> > > > > couldn't configure any connector getting always the message "No
> > > > connectors
> > > > > registered". Nothing in the logs
> > > > >
> > > > > On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com>
> > > wrote:
> > > > >
> > > > > > Please vote on whether to release ManifoldCF 2.10, RC0.
> > > > > >
> > > > > > The release artifacts can be found at
> > > > > >
> > > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-man
> > ifoldcf-2.10
> > > > > .
> > > > > > There is also a release tag at
> > > > > > https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.
> 10-RC0
> > .
> > > > > >
> > > > > > This release contains a number of fixes and new features. These
> > are
> > > > > > summarized in
> > > > > >
> > > > > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
> > > > > manifoldcf-2.10/CHANGES.txt
> > > > > > .
> > > > > >
> > > > > > Thanks,
> > > > > > Karl
> > > > > >
> > > > >
> > > >
> > >
> >
>
>
>
> --
> Piergiorgio Lucidi
> https://www.open4dev.com
>
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Piergiorgio Lucidi <pi...@apache.org>.
+1 from me.
I don't see any issue, I have just ran tests and if I try to run the
distribution built from the source code, I see all the connectors correctly
registered.
PJ
2018-04-16 13:01 GMT+02:00 Karl Wright <da...@gmail.com>:
> Everything looks good here, but I did notice that our copyright notice
> needs to be updated to 2018. I'll commit that in case we really do need to
> spin another RC.
>
> Karl
>
>
> On Mon, Apr 16, 2018 at 6:52 AM, Rafa Haro <rh...@apache.org> wrote:
>
> > my own build yes
> >
> > On Mon, Apr 16, 2018 at 12:23 PM Karl Wright <da...@gmail.com> wrote:
> >
> > > hmm, I can't seem to reproduce this.
> > >
> > > This was your own build, not the binary?
> > >
> > > Karl
> > >
> > > On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
> > >
> > > > Not sure if it is an issue but:
> > > >
> > > > I have downloaded source code, built with maven and ant without
> > problems.
> > > > Then I started the system at dist/example/start.sh. After starting
> up I
> > > > couldn't configure any connector getting always the message "No
> > > connectors
> > > > registered". Nothing in the logs
> > > >
> > > > On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com>
> > wrote:
> > > >
> > > > > Please vote on whether to release ManifoldCF 2.10, RC0.
> > > > >
> > > > > The release artifacts can be found at
> > > > >
> > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-man
> ifoldcf-2.10
> > > > .
> > > > > There is also a release tag at
> > > > > https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0
> .
> > > > >
> > > > > This release contains a number of fixes and new features. These
> are
> > > > > summarized in
> > > > >
> > > > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
> > > > manifoldcf-2.10/CHANGES.txt
> > > > > .
> > > > >
> > > > > Thanks,
> > > > > Karl
> > > > >
> > > >
> > >
> >
>
--
Piergiorgio Lucidi
https://www.open4dev.com
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Karl Wright <da...@gmail.com>.
Everything looks good here, but I did notice that our copyright notice
needs to be updated to 2018. I'll commit that in case we really do need to
spin another RC.
Karl
On Mon, Apr 16, 2018 at 6:52 AM, Rafa Haro <rh...@apache.org> wrote:
> my own build yes
>
> On Mon, Apr 16, 2018 at 12:23 PM Karl Wright <da...@gmail.com> wrote:
>
> > hmm, I can't seem to reproduce this.
> >
> > This was your own build, not the binary?
> >
> > Karl
> >
> > On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
> >
> > > Not sure if it is an issue but:
> > >
> > > I have downloaded source code, built with maven and ant without
> problems.
> > > Then I started the system at dist/example/start.sh. After starting up I
> > > couldn't configure any connector getting always the message "No
> > connectors
> > > registered". Nothing in the logs
> > >
> > > On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com>
> wrote:
> > >
> > > > Please vote on whether to release ManifoldCF 2.10, RC0.
> > > >
> > > > The release artifacts can be found at
> > > >
> > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10
> > > .
> > > > There is also a release tag at
> > > > https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0 .
> > > >
> > > > This release contains a number of fixes and new features. These are
> > > > summarized in
> > > >
> > > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
> > > manifoldcf-2.10/CHANGES.txt
> > > > .
> > > >
> > > > Thanks,
> > > > Karl
> > > >
> > >
> >
>
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Rafa Haro <rh...@apache.org>.
my own build yes
On Mon, Apr 16, 2018 at 12:23 PM Karl Wright <da...@gmail.com> wrote:
> hmm, I can't seem to reproduce this.
>
> This was your own build, not the binary?
>
> Karl
>
> On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
>
> > Not sure if it is an issue but:
> >
> > I have downloaded source code, built with maven and ant without problems.
> > Then I started the system at dist/example/start.sh. After starting up I
> > couldn't configure any connector getting always the message "No
> connectors
> > registered". Nothing in the logs
> >
> > On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com> wrote:
> >
> > > Please vote on whether to release ManifoldCF 2.10, RC0.
> > >
> > > The release artifacts can be found at
> > >
> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10
> > .
> > > There is also a release tag at
> > > https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0 .
> > >
> > > This release contains a number of fixes and new features. These are
> > > summarized in
> > >
> > > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
> > manifoldcf-2.10/CHANGES.txt
> > > .
> > >
> > > Thanks,
> > > Karl
> > >
> >
>
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Karl Wright <da...@gmail.com>.
hmm, I can't seem to reproduce this.
This was your own build, not the binary?
Karl
On Mon, Apr 16, 2018 at 4:13 AM, Rafa Haro <rh...@apache.org> wrote:
> Not sure if it is an issue but:
>
> I have downloaded source code, built with maven and ant without problems.
> Then I started the system at dist/example/start.sh. After starting up I
> couldn't configure any connector getting always the message "No connectors
> registered". Nothing in the logs
>
> On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com> wrote:
>
> > Please vote on whether to release ManifoldCF 2.10, RC0.
> >
> > The release artifacts can be found at
> > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10
> .
> > There is also a release tag at
> > https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0 .
> >
> > This release contains a number of fixes and new features. These are
> > summarized in
> >
> > https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
> manifoldcf-2.10/CHANGES.txt
> > .
> >
> > Thanks,
> > Karl
> >
>
Re: [VOTE] Release ManifoldCF 2.10, RC0
Posted by Rafa Haro <rh...@apache.org>.
Not sure if it is an issue but:
I have downloaded source code, built with maven and ant without problems.
Then I started the system at dist/example/start.sh. After starting up I
couldn't configure any connector getting always the message "No connectors
registered". Nothing in the logs
On Sun, Apr 15, 2018 at 7:30 PM Karl Wright <da...@gmail.com> wrote:
> Please vote on whether to release ManifoldCF 2.10, RC0.
>
> The release artifacts can be found at
> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10 .
> There is also a release tag at
> https://svn.apache.org/repos/asf/manifoldcf/tags/release-2.10-RC0 .
>
> This release contains a number of fixes and new features. These are
> summarized in
>
> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.10/CHANGES.txt
> .
>
> Thanks,
> Karl
>