You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@openmeetings.apache.org by Peter Dähn <da...@vcrp.de> on 2017/12/07 13:03:25 UTC

[DISCUSSION] whiteboard zoom bahaviour

I believe this is discussable.

I would say, if I have a presentation/webinar I would have some 
documents that I put on the wb and that should take the maximum space 
(for me and any of my students). And therefore are full fit and page 
width. And afterwards I would start to draw something on my slides.

If all that doesn't make sense I would suggest "document fit" and 
"document width" zoom level. And a wish, uploading a document to an 
empty wb should trigger "document fit".

Greetings Peter


On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <solomax666@gmail.com 
<ma...@gmail.com>> wrote:
Imagine the following scenario
you have created diagram on the WB
with images, arrows, text etc.

and this diagram took the whole width of the WB 1920 px ...

Now you have uploaded document with page width of 500px

Should I cut all your diagram and mage WB width == 500px?

On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <daehn@vcrp.de 
<ma...@vcrp.de>> wrote:
I agree this is no blocker.

But I think "full fit" and "page width" as zoom level doesn't make sense 
now. These should take the document as reference and not the the whiteboard.

"Page width" (my understanding) should zoom to maximize the *document* 
horizontally and "full fit" either vertically or horizontally. And this 
is not the behaviour right now (flash whiteboard it was in that way...).

Greetings Peter


Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
Hello Peter,

I'm not sure this the "issue" :))

1) We have to create WB of some predefined size. (this size is hardcoded 
to be WxH 1920x1080)
2) in case document dimensions are bigger WB size will be increased
3) in case document dimensions are smaller it will occupy less space

So I'm not sure how this should be addressed :(
We can create separate thread and discuss possible solution ....

I believe this not blocker

On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <daehn@vcrp.de 
<ma...@vcrp.de>> wrote:
Hi Maxim,

unfortunately I haven't check this one before. :-(

/"//
//... but the document on the whiteboard has a huge empty part on the 
right side. And then zoom full page etc. doesn't show the expected result.//
//"

/But it still seems to be present. I'm not sure if this have to be fixed 
before release. For me it would be fine after the release, because one 
could handle it by manually zoom.

Greetings Peter
-- 
B.Sc. Peter Dähn
Virtueller Campus Rheinland-Pfalz <http://www.vcrp.de/>
Postfach 3049
67653 Kaiserslautern
Tel: 0631/205-4944
Olat <https://olat.vcrp.de/>

Re: [DISCUSSION] whiteboard zoom bahaviour

Posted by Peter Dähn <da...@vcrp.de>.
I think it would be good to release it soon. :-)

Rooms should be on html5 way, just a&a positioning is left.

I think than we should use it in production and get some feedback... 
hopefully... ;-)

Greetings Peter

Am 08.12.2017 um 10:14 schrieb Maxim Solodovnik:
> Thanks for the JIRA issues :)
> I believe 4.0.2 should be released as soon as Wicket 8.0.0, which
> should be soon :)
>
> On Thu, Dec 7, 2017 at 11:44 PM, Maxim Solodovnik <so...@gmail.com> wrote:
>> OK, then the easiest solution would be: to zoom document in case it is
>> smaller than WB
>> Could you please file JIRA regarding this?
>>
>> On Thu, Dec 7, 2017 at 8:44 PM, Peter Dähn <da...@vcrp.de> wrote:
>>> I believe most of the moderators doesn't care about what kind of width we
>>> are talking about... ;-)
>>>
>>> I think the question is, what will be expected from the majority, if
>>> choosing one of the zoom options. And here I got the feedback, that zoom on
>>> the document (or as you said object dependent) is expected. And former
>>> whiteboard did that trick so at least here the people will realize this
>>> "loss of quality".
>>>
>>> Greetings Peter
>>>
>>>
>>> Am 07.12.2017 um 14:30 schrieb Maxim Solodovnik:
>>>> I guess this is also some kind of "wording" issue
>>>>
>>>> I read "Page width" as WB width == browser page width
>>>> You read it as document page with == browser page width
>>>>
>>>> "document fit" might be the option, but this will add complication to zoom
>>>> logic
>>>>
>>>> In previous version WB size was sort of fluid, it re-calculated based
>>>> on the object s on WB
>>>> Also complicated and hard to maintain :(
>>>>
>>>> On Thu, Dec 7, 2017 at 8:03 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>>> I believe this is discussable.
>>>>>
>>>>> I would say, if I have a presentation/webinar I would have some documents
>>>>> that I put on the wb and that should take the maximum space (for me and
>>>>> any
>>>>> of my students). And therefore are full fit and page width. And
>>>>> afterwards I
>>>>> would start to draw something on my slides.
>>>>>
>>>>> If all that doesn't make sense I would suggest "document fit" and
>>>>> "document
>>>>> width" zoom level. And a wish, uploading a document to an empty wb should
>>>>> trigger "document fit".
>>>>>
>>>>> Greetings Peter
>>>>>
>>>>>
>>>>> On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <so...@gmail.com>
>>>>> wrote:
>>>>> Imagine the following scenario
>>>>> you have created diagram on the WB
>>>>> with images, arrows, text etc.
>>>>>
>>>>> and this diagram took the whole width of the WB 1920 px ...
>>>>>
>>>>> Now you have uploaded document with page width of 500px
>>>>>
>>>>> Should I cut all your diagram and mage WB width == 500px?
>>>>>
>>>>> On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>>> I agree this is no blocker.
>>>>>
>>>>> But I think "full fit" and "page width" as zoom level doesn't make sense
>>>>> now. These should take the document as reference and not the the
>>>>> whiteboard.
>>>>>
>>>>> "Page width" (my understanding) should zoom to maximize the document
>>>>> horizontally and "full fit" either vertically or horizontally. And this
>>>>> is
>>>>> not the behaviour right now (flash whiteboard it was in that way...).
>>>>>
>>>>> Greetings Peter
>>>>>
>>>>>
>>>>> Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
>>>>> Hello Peter,
>>>>>
>>>>> I'm not sure this the "issue" :))
>>>>>
>>>>> 1) We have to create WB of some predefined size. (this size is hardcoded
>>>>> to
>>>>> be WxH 1920x1080)
>>>>> 2) in case document dimensions are bigger WB size will be increased
>>>>> 3) in case document dimensions are smaller it will occupy less space
>>>>>
>>>>> So I'm not sure how this should be addressed :(
>>>>> We can create separate thread and discuss possible solution ....
>>>>>
>>>>> I believe this not blocker
>>>>>
>>>>> On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>>> Hi Maxim,
>>>>>
>>>>> unfortunately I haven't check this one before. :-(
>>>>>
>>>>> "
>>>>> ... but the document on the whiteboard has a huge empty part on the right
>>>>> side. And then zoom full page etc. doesn't show the expected result.
>>>>> "
>>>>>
>>>>> But it still seems to be present. I'm not sure if this have to be fixed
>>>>> before release. For me it would be fine after the release, because one
>>>>> could
>>>>> handle it by manually zoom.
>>>>>
>>>>> Greetings Peter
>>>>> --
>>>>> B.Sc. Peter Dähn
>>>>> Virtueller Campus Rheinland-Pfalz
>>>>> Postfach 3049
>>>>> 67653 Kaiserslautern
>>>>> Tel: 0631/205-4944
>>>>> Olat
>>>>
>>>>
>>
>>
>> --
>> WBR
>> Maxim aka solomax
>
>

Re: [DISCUSSION] whiteboard zoom bahaviour

Posted by Maxim Solodovnik <so...@gmail.com>.
Thanks for the JIRA issues :)
I believe 4.0.2 should be released as soon as Wicket 8.0.0, which
should be soon :)

On Thu, Dec 7, 2017 at 11:44 PM, Maxim Solodovnik <so...@gmail.com> wrote:
> OK, then the easiest solution would be: to zoom document in case it is
> smaller than WB
> Could you please file JIRA regarding this?
>
> On Thu, Dec 7, 2017 at 8:44 PM, Peter Dähn <da...@vcrp.de> wrote:
>> I believe most of the moderators doesn't care about what kind of width we
>> are talking about... ;-)
>>
>> I think the question is, what will be expected from the majority, if
>> choosing one of the zoom options. And here I got the feedback, that zoom on
>> the document (or as you said object dependent) is expected. And former
>> whiteboard did that trick so at least here the people will realize this
>> "loss of quality".
>>
>> Greetings Peter
>>
>>
>> Am 07.12.2017 um 14:30 schrieb Maxim Solodovnik:
>>>
>>> I guess this is also some kind of "wording" issue
>>>
>>> I read "Page width" as WB width == browser page width
>>> You read it as document page with == browser page width
>>>
>>> "document fit" might be the option, but this will add complication to zoom
>>> logic
>>>
>>> In previous version WB size was sort of fluid, it re-calculated based
>>> on the object s on WB
>>> Also complicated and hard to maintain :(
>>>
>>> On Thu, Dec 7, 2017 at 8:03 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>>
>>>> I believe this is discussable.
>>>>
>>>> I would say, if I have a presentation/webinar I would have some documents
>>>> that I put on the wb and that should take the maximum space (for me and
>>>> any
>>>> of my students). And therefore are full fit and page width. And
>>>> afterwards I
>>>> would start to draw something on my slides.
>>>>
>>>> If all that doesn't make sense I would suggest "document fit" and
>>>> "document
>>>> width" zoom level. And a wish, uploading a document to an empty wb should
>>>> trigger "document fit".
>>>>
>>>> Greetings Peter
>>>>
>>>>
>>>> On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <so...@gmail.com>
>>>> wrote:
>>>> Imagine the following scenario
>>>> you have created diagram on the WB
>>>> with images, arrows, text etc.
>>>>
>>>> and this diagram took the whole width of the WB 1920 px ...
>>>>
>>>> Now you have uploaded document with page width of 500px
>>>>
>>>> Should I cut all your diagram and mage WB width == 500px?
>>>>
>>>> On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>> I agree this is no blocker.
>>>>
>>>> But I think "full fit" and "page width" as zoom level doesn't make sense
>>>> now. These should take the document as reference and not the the
>>>> whiteboard.
>>>>
>>>> "Page width" (my understanding) should zoom to maximize the document
>>>> horizontally and "full fit" either vertically or horizontally. And this
>>>> is
>>>> not the behaviour right now (flash whiteboard it was in that way...).
>>>>
>>>> Greetings Peter
>>>>
>>>>
>>>> Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
>>>> Hello Peter,
>>>>
>>>> I'm not sure this the "issue" :))
>>>>
>>>> 1) We have to create WB of some predefined size. (this size is hardcoded
>>>> to
>>>> be WxH 1920x1080)
>>>> 2) in case document dimensions are bigger WB size will be increased
>>>> 3) in case document dimensions are smaller it will occupy less space
>>>>
>>>> So I'm not sure how this should be addressed :(
>>>> We can create separate thread and discuss possible solution ....
>>>>
>>>> I believe this not blocker
>>>>
>>>> On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>> Hi Maxim,
>>>>
>>>> unfortunately I haven't check this one before. :-(
>>>>
>>>> "
>>>> ... but the document on the whiteboard has a huge empty part on the right
>>>> side. And then zoom full page etc. doesn't show the expected result.
>>>> "
>>>>
>>>> But it still seems to be present. I'm not sure if this have to be fixed
>>>> before release. For me it would be fine after the release, because one
>>>> could
>>>> handle it by manually zoom.
>>>>
>>>> Greetings Peter
>>>> --
>>>> B.Sc. Peter Dähn
>>>> Virtueller Campus Rheinland-Pfalz
>>>> Postfach 3049
>>>> 67653 Kaiserslautern
>>>> Tel: 0631/205-4944
>>>> Olat
>>>
>>>
>>>
>>
>
>
>
> --
> WBR
> Maxim aka solomax



-- 
WBR
Maxim aka solomax

Re: [DISCUSSION] whiteboard zoom bahaviour

Posted by Maxim Solodovnik <so...@gmail.com>.
OK, then the easiest solution would be: to zoom document in case it is
smaller than WB
Could you please file JIRA regarding this?

On Thu, Dec 7, 2017 at 8:44 PM, Peter Dähn <da...@vcrp.de> wrote:
> I believe most of the moderators doesn't care about what kind of width we
> are talking about... ;-)
>
> I think the question is, what will be expected from the majority, if
> choosing one of the zoom options. And here I got the feedback, that zoom on
> the document (or as you said object dependent) is expected. And former
> whiteboard did that trick so at least here the people will realize this
> "loss of quality".
>
> Greetings Peter
>
>
> Am 07.12.2017 um 14:30 schrieb Maxim Solodovnik:
>>
>> I guess this is also some kind of "wording" issue
>>
>> I read "Page width" as WB width == browser page width
>> You read it as document page with == browser page width
>>
>> "document fit" might be the option, but this will add complication to zoom
>> logic
>>
>> In previous version WB size was sort of fluid, it re-calculated based
>> on the object s on WB
>> Also complicated and hard to maintain :(
>>
>> On Thu, Dec 7, 2017 at 8:03 PM, Peter Dähn <da...@vcrp.de> wrote:
>>>
>>> I believe this is discussable.
>>>
>>> I would say, if I have a presentation/webinar I would have some documents
>>> that I put on the wb and that should take the maximum space (for me and
>>> any
>>> of my students). And therefore are full fit and page width. And
>>> afterwards I
>>> would start to draw something on my slides.
>>>
>>> If all that doesn't make sense I would suggest "document fit" and
>>> "document
>>> width" zoom level. And a wish, uploading a document to an empty wb should
>>> trigger "document fit".
>>>
>>> Greetings Peter
>>>
>>>
>>> On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <so...@gmail.com>
>>> wrote:
>>> Imagine the following scenario
>>> you have created diagram on the WB
>>> with images, arrows, text etc.
>>>
>>> and this diagram took the whole width of the WB 1920 px ...
>>>
>>> Now you have uploaded document with page width of 500px
>>>
>>> Should I cut all your diagram and mage WB width == 500px?
>>>
>>> On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <da...@vcrp.de> wrote:
>>> I agree this is no blocker.
>>>
>>> But I think "full fit" and "page width" as zoom level doesn't make sense
>>> now. These should take the document as reference and not the the
>>> whiteboard.
>>>
>>> "Page width" (my understanding) should zoom to maximize the document
>>> horizontally and "full fit" either vertically or horizontally. And this
>>> is
>>> not the behaviour right now (flash whiteboard it was in that way...).
>>>
>>> Greetings Peter
>>>
>>>
>>> Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
>>> Hello Peter,
>>>
>>> I'm not sure this the "issue" :))
>>>
>>> 1) We have to create WB of some predefined size. (this size is hardcoded
>>> to
>>> be WxH 1920x1080)
>>> 2) in case document dimensions are bigger WB size will be increased
>>> 3) in case document dimensions are smaller it will occupy less space
>>>
>>> So I'm not sure how this should be addressed :(
>>> We can create separate thread and discuss possible solution ....
>>>
>>> I believe this not blocker
>>>
>>> On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <da...@vcrp.de> wrote:
>>> Hi Maxim,
>>>
>>> unfortunately I haven't check this one before. :-(
>>>
>>> "
>>> ... but the document on the whiteboard has a huge empty part on the right
>>> side. And then zoom full page etc. doesn't show the expected result.
>>> "
>>>
>>> But it still seems to be present. I'm not sure if this have to be fixed
>>> before release. For me it would be fine after the release, because one
>>> could
>>> handle it by manually zoom.
>>>
>>> Greetings Peter
>>> --
>>> B.Sc. Peter Dähn
>>> Virtueller Campus Rheinland-Pfalz
>>> Postfach 3049
>>> 67653 Kaiserslautern
>>> Tel: 0631/205-4944
>>> Olat
>>
>>
>>
>



-- 
WBR
Maxim aka solomax

Re: [DISCUSSION] whiteboard zoom bahaviour

Posted by Peter Dähn <da...@vcrp.de>.
I believe most of the moderators doesn't care about what kind of width 
we are talking about... ;-)

I think the question is, what will be expected from the majority, if 
choosing one of the zoom options. And here I got the feedback, that zoom 
on the document (or as you said object dependent) is expected. And 
former whiteboard did that trick so at least here the people will 
realize this "loss of quality".

Greetings Peter

Am 07.12.2017 um 14:30 schrieb Maxim Solodovnik:
> I guess this is also some kind of "wording" issue
>
> I read "Page width" as WB width == browser page width
> You read it as document page with == browser page width
>
> "document fit" might be the option, but this will add complication to zoom logic
>
> In previous version WB size was sort of fluid, it re-calculated based
> on the object s on WB
> Also complicated and hard to maintain :(
>
> On Thu, Dec 7, 2017 at 8:03 PM, Peter Dähn <da...@vcrp.de> wrote:
>> I believe this is discussable.
>>
>> I would say, if I have a presentation/webinar I would have some documents
>> that I put on the wb and that should take the maximum space (for me and any
>> of my students). And therefore are full fit and page width. And afterwards I
>> would start to draw something on my slides.
>>
>> If all that doesn't make sense I would suggest "document fit" and "document
>> width" zoom level. And a wish, uploading a document to an empty wb should
>> trigger "document fit".
>>
>> Greetings Peter
>>
>>
>> On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <so...@gmail.com>
>> wrote:
>> Imagine the following scenario
>> you have created diagram on the WB
>> with images, arrows, text etc.
>>
>> and this diagram took the whole width of the WB 1920 px ...
>>
>> Now you have uploaded document with page width of 500px
>>
>> Should I cut all your diagram and mage WB width == 500px?
>>
>> On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <da...@vcrp.de> wrote:
>> I agree this is no blocker.
>>
>> But I think "full fit" and "page width" as zoom level doesn't make sense
>> now. These should take the document as reference and not the the whiteboard.
>>
>> "Page width" (my understanding) should zoom to maximize the document
>> horizontally and "full fit" either vertically or horizontally. And this is
>> not the behaviour right now (flash whiteboard it was in that way...).
>>
>> Greetings Peter
>>
>>
>> Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
>> Hello Peter,
>>
>> I'm not sure this the "issue" :))
>>
>> 1) We have to create WB of some predefined size. (this size is hardcoded to
>> be WxH 1920x1080)
>> 2) in case document dimensions are bigger WB size will be increased
>> 3) in case document dimensions are smaller it will occupy less space
>>
>> So I'm not sure how this should be addressed :(
>> We can create separate thread and discuss possible solution ....
>>
>> I believe this not blocker
>>
>> On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <da...@vcrp.de> wrote:
>> Hi Maxim,
>>
>> unfortunately I haven't check this one before. :-(
>>
>> "
>> ... but the document on the whiteboard has a huge empty part on the right
>> side. And then zoom full page etc. doesn't show the expected result.
>> "
>>
>> But it still seems to be present. I'm not sure if this have to be fixed
>> before release. For me it would be fine after the release, because one could
>> handle it by manually zoom.
>>
>> Greetings Peter
>> --
>> B.Sc. Peter Dähn
>> Virtueller Campus Rheinland-Pfalz
>> Postfach 3049
>> 67653 Kaiserslautern
>> Tel: 0631/205-4944
>> Olat
>
>

Re: [DISCUSSION] whiteboard zoom bahaviour

Posted by Maxim Solodovnik <so...@gmail.com>.
I guess this is also some kind of "wording" issue

I read "Page width" as WB width == browser page width
You read it as document page with == browser page width

"document fit" might be the option, but this will add complication to zoom logic

In previous version WB size was sort of fluid, it re-calculated based
on the object s on WB
Also complicated and hard to maintain :(

On Thu, Dec 7, 2017 at 8:03 PM, Peter Dähn <da...@vcrp.de> wrote:
> I believe this is discussable.
>
> I would say, if I have a presentation/webinar I would have some documents
> that I put on the wb and that should take the maximum space (for me and any
> of my students). And therefore are full fit and page width. And afterwards I
> would start to draw something on my slides.
>
> If all that doesn't make sense I would suggest "document fit" and "document
> width" zoom level. And a wish, uploading a document to an empty wb should
> trigger "document fit".
>
> Greetings Peter
>
>
> On Thu, Dec 7, 2017 at 7:17 PM, Maxim Solodovnik <so...@gmail.com>
> wrote:
> Imagine the following scenario
> you have created diagram on the WB
> with images, arrows, text etc.
>
> and this diagram took the whole width of the WB 1920 px ...
>
> Now you have uploaded document with page width of 500px
>
> Should I cut all your diagram and mage WB width == 500px?
>
> On Thu, Dec 7, 2017 at 7:10 PM, Peter Dähn <da...@vcrp.de> wrote:
> I agree this is no blocker.
>
> But I think "full fit" and "page width" as zoom level doesn't make sense
> now. These should take the document as reference and not the the whiteboard.
>
> "Page width" (my understanding) should zoom to maximize the document
> horizontally and "full fit" either vertically or horizontally. And this is
> not the behaviour right now (flash whiteboard it was in that way...).
>
> Greetings Peter
>
>
> Am 07.12.2017 um 09:27 schrieb Maxim Solodovnik:
> Hello Peter,
>
> I'm not sure this the "issue" :))
>
> 1) We have to create WB of some predefined size. (this size is hardcoded to
> be WxH 1920x1080)
> 2) in case document dimensions are bigger WB size will be increased
> 3) in case document dimensions are smaller it will occupy less space
>
> So I'm not sure how this should be addressed :(
> We can create separate thread and discuss possible solution ....
>
> I believe this not blocker
>
> On Thu, Dec 7, 2017 at 3:21 PM, Peter Dähn <da...@vcrp.de> wrote:
> Hi Maxim,
>
> unfortunately I haven't check this one before. :-(
>
> "
> ... but the document on the whiteboard has a huge empty part on the right
> side. And then zoom full page etc. doesn't show the expected result.
> "
>
> But it still seems to be present. I'm not sure if this have to be fixed
> before release. For me it would be fine after the release, because one could
> handle it by manually zoom.
>
> Greetings Peter
> --
> B.Sc. Peter Dähn
> Virtueller Campus Rheinland-Pfalz
> Postfach 3049
> 67653 Kaiserslautern
> Tel: 0631/205-4944
> Olat



-- 
WBR
Maxim aka solomax