You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by tobin <to...@gmail.com> on 2020/04/03 19:54:11 UTC

Quick installation guide issue

Hi,

I've completed the instructions at
http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html

1.

Home > Infrastructure > System VMs now displays two VMs with a "VM
state" of "Running" and an "Agent State" of "-".

Is this normal?

2.

If I select "New Instance" it displays no templates.

Surely the default template should be visible?

3.

If I try to ssh into the the SSVM, I get "No route to host". It
exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
4.11.2.0", etc.

Please advise.

Regards,
Tobin

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
That's correct.

On Fri, 3 Apr 2020 at 21:39, Vivek Kumar <vi...@indiqus.com> wrote:
>
> I am assuming that you are performing the SSH to the system VMs from the host where system VM are running ? It’s only accessible from the host where your system VMs running, it can’t be connected from other hosts
>
> Vivek Kumar
> Manager - Cloud & DevOps
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> www.indiqus.com <http://indiqus.com/>
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>
> > On 04-Apr-2020, at 2:06 AM, Vivek Kumar <vi...@indiqus.com> wrote:
> >
> > No but it helps as part of troubleshooting specially on KVM hosts. Because other hypervisor i.e Xenserver and VMware you can view the console without doing the SSH.
> >
> > Vivek Kumar
> > Manager - Cloud & DevOps
> > IndiQus Technologies
> > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > www.indiqus.com <http://indiqus.com/>
> >
> > This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
> >
> >> On 04-Apr-2020, at 2:03 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
> >>
> >> Hi,
> >>
> >> I just followed the quick installation guide. Is it missing something?
> >>
> >> Thanks,
> >> Tobin
> >>
> >> On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vivek.kumar@indiqus.com <ma...@indiqus.com>> wrote:
> >>>
> >>> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
> >>>
> >>>
> >>> Vivek Kumar
> >>> Manager - Cloud & DevOps
> >>> IndiQus Technologies
> >>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >>> www.indiqus.com <http://www.indiqus.com/> <http://indiqus.com/ <http://indiqus.com/>>
> >>>
> >>> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
> >>>
> >>>> On 04-Apr-2020, at 1:45 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
> >>>>
> >>>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206 <ma...@169.254.3.206>
> >>>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> >>>>
> >>>> Thanks,
> >>>> Tobin
> >>>>
> >>>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <andrija.panic@gmail.com <ma...@gmail.com>> wrote:
> >>>>>
> >>>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
> >>>>> run the check script:
> >>>>>
> >>>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy <ma...@169.254.xxx.yyy>
> >>>>> /usr/local/cloud/systemvm/ssvm-check.sh
> >>>>>
> >>>>> and report back the results - there is check if VM can ping 8,8.8.8 (public
> >>>>> network works fine - ssvm can access internet), there is check if the agent
> >>>>> can connect to mgmt server (agent status can be reported to mgmt) and also
> >>>>> if Secondary Storage is mounted and printable (check the IP - with some
> >>>>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
> >>>>> address)
> >>>>>
> >>>>> Cheers
> >>>>> Andrija
> >>>>>
> >>>>> On Fri, 3 Apr 2020 at 22:08, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
> >>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> The global settings host field has the value of 192.168.0.186 which is
> >>>>>> the correct address for the host.
> >>>>>>
> >>>>>> If I "View console" a blank pop up appears. If I try to ssh into the
> >>>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> >>>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> >>>>>>
> >>>>>> Thanks,
> >>>>>> Tobin
> >>>>>>
> >>>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vivek.kumar@indiqus.com <ma...@indiqus.com>> wrote:
> >>>>>>>
> >>>>>>> Hello Tobin,
> >>>>>>>
> >>>>>>> Agent state must be in ‘UP’ state. Then it will download the default
> >>>>>> template.  Can you just login to the system VM and check the
> >>>>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
> >>>>>> Just click on the global setting and type ‘host’ in search button and
> >>>>>> enter. What do you see ? There should be your management IP, can you verify
> >>>>>> that ?
> >>>>>>>
> >>>>>>>
> >>>>>>> Vivek Kumar
> >>>>>>> Manager - Cloud & DevOps
> >>>>>>> IndiQus Technologies
> >>>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >>>>>>> www.indiqus.com <http://www.indiqus.com/> <http://indiqus.com/ <http://indiqus.com/>>
> >>>>>>>
> >>>>>>> This message is intended only for the use of the individual or entity to
> >>>>>> which it is addressed and may contain information that is confidential
> >>>>>> and/or privileged. If you are not the intended recipient please delete the
> >>>>>> original message and any copy of it from your computer system. You are
> >>>>>> hereby notified that any dissemination, distribution or copying of this
> >>>>>> communication is strictly prohibited unless proper authorization has been
> >>>>>> obtained for such action. If you have received this communication in error,
> >>>>>> please notify the sender immediately. Although IndiQus attempts to sweep
> >>>>>> e-mail and attachments for viruses, it does not guarantee that both are
> >>>>>> virus-free and accepts no liability for any damage sustained as a result of
> >>>>>> viruses.
> >>>>>>>
> >>>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
> >>>>>>>>
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> I've completed the instructions at
> >>>>>>>>
> >>>>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html <http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html>
> >>>>>>>>
> >>>>>>>> 1.
> >>>>>>>>
> >>>>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
> >>>>>>>> state" of "Running" and an "Agent State" of "-".
> >>>>>>>>
> >>>>>>>> Is this normal?
> >>>>>>>>
> >>>>>>>> 2.
> >>>>>>>>
> >>>>>>>> If I select "New Instance" it displays no templates.
> >>>>>>>>
> >>>>>>>> Surely the default template should be visible?
> >>>>>>>>
> >>>>>>>> 3.
> >>>>>>>>
> >>>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> >>>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> >>>>>>>> 4.11.2.0", etc.
> >>>>>>>>
> >>>>>>>> Please advise.
> >>>>>>>>
> >>>>>>>> Regards,
> >>>>>>>> Tobin
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>>
> >>>>> Andrija Panić
> >>>
> >
>

Re: Quick installation guide issue

Posted by Vivek Kumar <vi...@indiqus.com>.
I am assuming that you are performing the SSH to the system VMs from the host where system VM are running ? It’s only accessible from the host where your system VMs running, it can’t be connected from other hosts 

Vivek Kumar
Manager - Cloud & DevOps 
IndiQus Technologies
24*7  O +91 11 4055 1411  |   M +91 7503460090 
www.indiqus.com <http://indiqus.com/>

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.

> On 04-Apr-2020, at 2:06 AM, Vivek Kumar <vi...@indiqus.com> wrote:
> 
> No but it helps as part of troubleshooting specially on KVM hosts. Because other hypervisor i.e Xenserver and VMware you can view the console without doing the SSH. 
> 
> Vivek Kumar
> Manager - Cloud & DevOps 
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090 
> www.indiqus.com <http://indiqus.com/>
> 
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
> 
>> On 04-Apr-2020, at 2:03 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
>> 
>> Hi,
>> 
>> I just followed the quick installation guide. Is it missing something?
>> 
>> Thanks,
>> Tobin
>> 
>> On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vivek.kumar@indiqus.com <ma...@indiqus.com>> wrote:
>>> 
>>> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
>>> 
>>> 
>>> Vivek Kumar
>>> Manager - Cloud & DevOps
>>> IndiQus Technologies
>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>> www.indiqus.com <http://www.indiqus.com/> <http://indiqus.com/ <http://indiqus.com/>>
>>> 
>>> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>>> 
>>>> On 04-Apr-2020, at 1:45 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
>>>> 
>>>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206 <ma...@169.254.3.206>
>>>> ssh: connect to host 169.254.3.206 port 3922: No route to host
>>>> 
>>>> Thanks,
>>>> Tobin
>>>> 
>>>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <andrija.panic@gmail.com <ma...@gmail.com>> wrote:
>>>>> 
>>>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
>>>>> run the check script:
>>>>> 
>>>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy <ma...@169.254.xxx.yyy>
>>>>> /usr/local/cloud/systemvm/ssvm-check.sh
>>>>> 
>>>>> and report back the results - there is check if VM can ping 8,8.8.8 (public
>>>>> network works fine - ssvm can access internet), there is check if the agent
>>>>> can connect to mgmt server (agent status can be reported to mgmt) and also
>>>>> if Secondary Storage is mounted and printable (check the IP - with some
>>>>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
>>>>> address)
>>>>> 
>>>>> Cheers
>>>>> Andrija
>>>>> 
>>>>> On Fri, 3 Apr 2020 at 22:08, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
>>>>> 
>>>>>> Hi,
>>>>>> 
>>>>>> The global settings host field has the value of 192.168.0.186 which is
>>>>>> the correct address for the host.
>>>>>> 
>>>>>> If I "View console" a blank pop up appears. If I try to ssh into the
>>>>>> the SSVM, I get "No route to host". It exists, as `virsh console
>>>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
>>>>>> 
>>>>>> Thanks,
>>>>>> Tobin
>>>>>> 
>>>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vivek.kumar@indiqus.com <ma...@indiqus.com>> wrote:
>>>>>>> 
>>>>>>> Hello Tobin,
>>>>>>> 
>>>>>>> Agent state must be in ‘UP’ state. Then it will download the default
>>>>>> template.  Can you just login to the system VM and check the
>>>>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
>>>>>> Just click on the global setting and type ‘host’ in search button and
>>>>>> enter. What do you see ? There should be your management IP, can you verify
>>>>>> that ?
>>>>>>> 
>>>>>>> 
>>>>>>> Vivek Kumar
>>>>>>> Manager - Cloud & DevOps
>>>>>>> IndiQus Technologies
>>>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>>>>>> www.indiqus.com <http://www.indiqus.com/> <http://indiqus.com/ <http://indiqus.com/>>
>>>>>>> 
>>>>>>> This message is intended only for the use of the individual or entity to
>>>>>> which it is addressed and may contain information that is confidential
>>>>>> and/or privileged. If you are not the intended recipient please delete the
>>>>>> original message and any copy of it from your computer system. You are
>>>>>> hereby notified that any dissemination, distribution or copying of this
>>>>>> communication is strictly prohibited unless proper authorization has been
>>>>>> obtained for such action. If you have received this communication in error,
>>>>>> please notify the sender immediately. Although IndiQus attempts to sweep
>>>>>> e-mail and attachments for viruses, it does not guarantee that both are
>>>>>> virus-free and accepts no liability for any damage sustained as a result of
>>>>>> viruses.
>>>>>>> 
>>>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <tobinlandricombe@gmail.com <ma...@gmail.com>> wrote:
>>>>>>>> 
>>>>>>>> Hi,
>>>>>>>> 
>>>>>>>> I've completed the instructions at
>>>>>>>> 
>>>>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html <http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html>
>>>>>>>> 
>>>>>>>> 1.
>>>>>>>> 
>>>>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
>>>>>>>> state" of "Running" and an "Agent State" of "-".
>>>>>>>> 
>>>>>>>> Is this normal?
>>>>>>>> 
>>>>>>>> 2.
>>>>>>>> 
>>>>>>>> If I select "New Instance" it displays no templates.
>>>>>>>> 
>>>>>>>> Surely the default template should be visible?
>>>>>>>> 
>>>>>>>> 3.
>>>>>>>> 
>>>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
>>>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
>>>>>>>> 4.11.2.0", etc.
>>>>>>>> 
>>>>>>>> Please advise.
>>>>>>>> 
>>>>>>>> Regards,
>>>>>>>> Tobin
>>>>>>> 
>>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> 
>>>>> Andrija Panić
>>> 
>

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
So how should I debug the "No route to host" issue?

It seems to be quite a commonly reported issue but there don't seem to
be any general answers.

Thanks,
Tobin

On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
>
> No but it helps as part of troubleshooting specially on KVM hosts. Because other hypervisor i.e Xenserver and VMware you can view the console without doing the SSH.
>
> Vivek Kumar
> Manager - Cloud & DevOps
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> www.indiqus.com <http://indiqus.com/>
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>
> > On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> >
> > Hi,
> >
> > I just followed the quick installation guide. Is it missing something?
> >
> > Thanks,
> > Tobin
> >
> > On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com> wrote:
> >>
> >> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
> >>
> >>
> >> Vivek Kumar
> >> Manager - Cloud & DevOps
> >> IndiQus Technologies
> >> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >> www.indiqus.com <http://indiqus.com/>
> >>
> >> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
> >>
> >>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com> wrote:
> >>>
> >>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> >>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> >>>
> >>> Thanks,
> >>> Tobin
> >>>
> >>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
> >>>>
> >>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
> >>>> run the check script:
> >>>>
> >>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> >>>> /usr/local/cloud/systemvm/ssvm-check.sh
> >>>>
> >>>> and report back the results - there is check if VM can ping 8,8.8.8 (public
> >>>> network works fine - ssvm can access internet), there is check if the agent
> >>>> can connect to mgmt server (agent status can be reported to mgmt) and also
> >>>> if Secondary Storage is mounted and printable (check the IP - with some
> >>>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
> >>>> address)
> >>>>
> >>>> Cheers
> >>>> Andrija
> >>>>
> >>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
> >>>>
> >>>>> Hi,
> >>>>>
> >>>>> The global settings host field has the value of 192.168.0.186 which is
> >>>>> the correct address for the host.
> >>>>>
> >>>>> If I "View console" a blank pop up appears. If I try to ssh into the
> >>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> >>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> >>>>>
> >>>>> Thanks,
> >>>>> Tobin
> >>>>>
> >>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
> >>>>>>
> >>>>>> Hello Tobin,
> >>>>>>
> >>>>>> Agent state must be in ‘UP’ state. Then it will download the default
> >>>>> template.  Can you just login to the system VM and check the
> >>>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
> >>>>> Just click on the global setting and type ‘host’ in search button and
> >>>>> enter. What do you see ? There should be your management IP, can you verify
> >>>>> that ?
> >>>>>>
> >>>>>>
> >>>>>> Vivek Kumar
> >>>>>> Manager - Cloud & DevOps
> >>>>>> IndiQus Technologies
> >>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >>>>>> www.indiqus.com <http://indiqus.com/>
> >>>>>>
> >>>>>> This message is intended only for the use of the individual or entity to
> >>>>> which it is addressed and may contain information that is confidential
> >>>>> and/or privileged. If you are not the intended recipient please delete the
> >>>>> original message and any copy of it from your computer system. You are
> >>>>> hereby notified that any dissemination, distribution or copying of this
> >>>>> communication is strictly prohibited unless proper authorization has been
> >>>>> obtained for such action. If you have received this communication in error,
> >>>>> please notify the sender immediately. Although IndiQus attempts to sweep
> >>>>> e-mail and attachments for viruses, it does not guarantee that both are
> >>>>> virus-free and accepts no liability for any damage sustained as a result of
> >>>>> viruses.
> >>>>>>
> >>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> >>>>>>>
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> I've completed the instructions at
> >>>>>>>
> >>>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> >>>>>>>
> >>>>>>> 1.
> >>>>>>>
> >>>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
> >>>>>>> state" of "Running" and an "Agent State" of "-".
> >>>>>>>
> >>>>>>> Is this normal?
> >>>>>>>
> >>>>>>> 2.
> >>>>>>>
> >>>>>>> If I select "New Instance" it displays no templates.
> >>>>>>>
> >>>>>>> Surely the default template should be visible?
> >>>>>>>
> >>>>>>> 3.
> >>>>>>>
> >>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> >>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> >>>>>>> 4.11.2.0", etc.
> >>>>>>>
> >>>>>>> Please advise.
> >>>>>>>
> >>>>>>> Regards,
> >>>>>>> Tobin
> >>>>>>
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>>
> >>>> Andrija Panić
> >>
>

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
So after restarting everything, I have an SSVM up and running. I've
logged into it and it hasn't picked up an IP address:

root@systemvm:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 0e:00:a9:fe:02:bb brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 1e:00:b4:00:00:06 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 1e:00:ea:00:00:1b brd ff:ff:ff:ff:ff:ff

Presumably something's wrong in my environment but I've been back
through the quick install guide and can't find anything I might have
missed.

On Sat, 4 Apr 2020 at 11:52, tobin <to...@gmail.com> wrote:
>
> Ha, that worked. I'm sure I tried that!
>
> Thanks.
>
> On Sat, 4 Apr 2020 at 10:51, Andrija Panic <an...@gmail.com> wrote:
> >
> > root / password is the login to ssvm/cpvm/VRs
> >
> > On Fri, 3 Apr 2020, 23:39 tobin, <to...@gmail.com> wrote:
> >
> > > I've installed virt-manager on the box. When I select "Open" against
> > > the SSMV I get a password prompt.
> > >
> > > Please advise?
> > >
> > > On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
> > > >
> > > > No but it helps as part of troubleshooting specially on KVM hosts.
> > > Because other hypervisor i.e Xenserver and VMware you can view the console
> > > without doing the SSH.
> > > >
> > > > Vivek Kumar
> > > > Manager - Cloud & DevOps
> > > > IndiQus Technologies
> > > > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > > www.indiqus.com <http://indiqus.com/>
> > > >
> > > > This message is intended only for the use of the individual or entity to
> > > which it is addressed and may contain information that is confidential
> > > and/or privileged. If you are not the intended recipient please delete the
> > > original message and any copy of it from your computer system. You are
> > > hereby notified that any dissemination, distribution or copying of this
> > > communication is strictly prohibited unless proper authorization has been
> > > obtained for such action. If you have received this communication in error,
> > > please notify the sender immediately. Although IndiQus attempts to sweep
> > > e-mail and attachments for viruses, it does not guarantee that both are
> > > virus-free and accepts no liability for any damage sustained as a result of
> > > viruses.
> > > >
> > > > > On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > I just followed the quick installation guide. Is it missing something?
> > > > >
> > > > > Thanks,
> > > > > Tobin
> > > > >
> > > > > On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com>
> > > wrote:
> > > > >>
> > > > >> Dont you have GUI installed on your KVM host where you can take the
> > > console of your system VMs via virt-viewer. It’s good practice part of
> > > troubleshooting purpose if you have GUI installed on KVM host if your SSH
> > > doesn’t work somehow to the system VM.
> > > > >>
> > > > >>
> > > > >> Vivek Kumar
> > > > >> Manager - Cloud & DevOps
> > > > >> IndiQus Technologies
> > > > >> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > > >> www.indiqus.com <http://indiqus.com/>
> > > > >>
> > > > >> This message is intended only for the use of the individual or entity
> > > to which it is addressed and may contain information that is confidential
> > > and/or privileged. If you are not the intended recipient please delete the
> > > original message and any copy of it from your computer system. You are
> > > hereby notified that any dissemination, distribution or copying of this
> > > communication is strictly prohibited unless proper authorization has been
> > > obtained for such action. If you have received this communication in error,
> > > please notify the sender immediately. Although IndiQus attempts to sweep
> > > e-mail and attachments for viruses, it does not guarantee that both are
> > > virus-free and accepts no liability for any damage sustained as a result of
> > > viruses.
> > > > >>
> > > > >>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com>
> > > wrote:
> > > > >>>
> > > > >>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> > > > >>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> > > > >>>
> > > > >>> Thanks,
> > > > >>> Tobin
> > > > >>>
> > > > >>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com>
> > > wrote:
> > > > >>>>
> > > > >>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to
> > > SSVM) and
> > > > >>>> run the check script:
> > > > >>>>
> > > > >>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> > > > >>>> /usr/local/cloud/systemvm/ssvm-check.sh
> > > > >>>>
> > > > >>>> and report back the results - there is check if VM can ping 8,8.8.8
> > > (public
> > > > >>>> network works fine - ssvm can access internet), there is check if
> > > the agent
> > > > >>>> can connect to mgmt server (agent status can be reported to mgmt)
> > > and also
> > > > >>>> if Secondary Storage is mounted and printable (check the IP - with
> > > some
> > > > >>>> network misconfiguration, the Sec Stor NFS is reported with some
> > > funny IP
> > > > >>>> address)
> > > > >>>>
> > > > >>>> Cheers
> > > > >>>> Andrija
> > > > >>>>
> > > > >>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com>
> > > wrote:
> > > > >>>>
> > > > >>>>> Hi,
> > > > >>>>>
> > > > >>>>> The global settings host field has the value of 192.168.0.186
> > > which is
> > > > >>>>> the correct address for the host.
> > > > >>>>>
> > > > >>>>> If I "View console" a blank pop up appears. If I try to ssh into
> > > the
> > > > >>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> > > > >>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> > > > >>>>>
> > > > >>>>> Thanks,
> > > > >>>>> Tobin
> > > > >>>>>
> > > > >>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com>
> > > wrote:
> > > > >>>>>>
> > > > >>>>>> Hello Tobin,
> > > > >>>>>>
> > > > >>>>>> Agent state must be in ‘UP’ state. Then it will download the
> > > default
> > > > >>>>> template.  Can you just login to the system VM and check the
> > > > >>>>> /var/log/cloud.log. Can you also verify the host setting in global
> > > setting.
> > > > >>>>> Just click on the global setting and type ‘host’ in search button
> > > and
> > > > >>>>> enter. What do you see ? There should be your management IP, can
> > > you verify
> > > > >>>>> that ?
> > > > >>>>>>
> > > > >>>>>>
> > > > >>>>>> Vivek Kumar
> > > > >>>>>> Manager - Cloud & DevOps
> > > > >>>>>> IndiQus Technologies
> > > > >>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > > >>>>>> www.indiqus.com <http://indiqus.com/>
> > > > >>>>>>
> > > > >>>>>> This message is intended only for the use of the individual or
> > > entity to
> > > > >>>>> which it is addressed and may contain information that is
> > > confidential
> > > > >>>>> and/or privileged. If you are not the intended recipient please
> > > delete the
> > > > >>>>> original message and any copy of it from your computer system. You
> > > are
> > > > >>>>> hereby notified that any dissemination, distribution or copying of
> > > this
> > > > >>>>> communication is strictly prohibited unless proper authorization
> > > has been
> > > > >>>>> obtained for such action. If you have received this communication
> > > in error,
> > > > >>>>> please notify the sender immediately. Although IndiQus attempts to
> > > sweep
> > > > >>>>> e-mail and attachments for viruses, it does not guarantee that
> > > both are
> > > > >>>>> virus-free and accepts no liability for any damage sustained as a
> > > result of
> > > > >>>>> viruses.
> > > > >>>>>>
> > > > >>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com>
> > > wrote:
> > > > >>>>>>>
> > > > >>>>>>> Hi,
> > > > >>>>>>>
> > > > >>>>>>> I've completed the instructions at
> > > > >>>>>>>
> > > > >>>>>
> > > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > > > >>>>>>>
> > > > >>>>>>> 1.
> > > > >>>>>>>
> > > > >>>>>>> Home > Infrastructure > System VMs now displays two VMs with a
> > > "VM
> > > > >>>>>>> state" of "Running" and an "Agent State" of "-".
> > > > >>>>>>>
> > > > >>>>>>> Is this normal?
> > > > >>>>>>>
> > > > >>>>>>> 2.
> > > > >>>>>>>
> > > > >>>>>>> If I select "New Instance" it displays no templates.
> > > > >>>>>>>
> > > > >>>>>>> Surely the default template should be visible?
> > > > >>>>>>>
> > > > >>>>>>> 3.
> > > > >>>>>>>
> > > > >>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> > > > >>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack
> > > SystemVM
> > > > >>>>>>> 4.11.2.0", etc.
> > > > >>>>>>>
> > > > >>>>>>> Please advise.
> > > > >>>>>>>
> > > > >>>>>>> Regards,
> > > > >>>>>>> Tobin
> > > > >>>>>>
> > > > >>>>>
> > > > >>>>
> > > > >>>>
> > > > >>>> --
> > > > >>>>
> > > > >>>> Andrija Panić
> > > > >>
> > > >
> > >

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
Ha, that worked. I'm sure I tried that!

Thanks.

On Sat, 4 Apr 2020 at 10:51, Andrija Panic <an...@gmail.com> wrote:
>
> root / password is the login to ssvm/cpvm/VRs
>
> On Fri, 3 Apr 2020, 23:39 tobin, <to...@gmail.com> wrote:
>
> > I've installed virt-manager on the box. When I select "Open" against
> > the SSMV I get a password prompt.
> >
> > Please advise?
> >
> > On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
> > >
> > > No but it helps as part of troubleshooting specially on KVM hosts.
> > Because other hypervisor i.e Xenserver and VMware you can view the console
> > without doing the SSH.
> > >
> > > Vivek Kumar
> > > Manager - Cloud & DevOps
> > > IndiQus Technologies
> > > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > www.indiqus.com <http://indiqus.com/>
> > >
> > > This message is intended only for the use of the individual or entity to
> > which it is addressed and may contain information that is confidential
> > and/or privileged. If you are not the intended recipient please delete the
> > original message and any copy of it from your computer system. You are
> > hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited unless proper authorization has been
> > obtained for such action. If you have received this communication in error,
> > please notify the sender immediately. Although IndiQus attempts to sweep
> > e-mail and attachments for viruses, it does not guarantee that both are
> > virus-free and accepts no liability for any damage sustained as a result of
> > viruses.
> > >
> > > > On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I just followed the quick installation guide. Is it missing something?
> > > >
> > > > Thanks,
> > > > Tobin
> > > >
> > > > On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com>
> > wrote:
> > > >>
> > > >> Dont you have GUI installed on your KVM host where you can take the
> > console of your system VMs via virt-viewer. It’s good practice part of
> > troubleshooting purpose if you have GUI installed on KVM host if your SSH
> > doesn’t work somehow to the system VM.
> > > >>
> > > >>
> > > >> Vivek Kumar
> > > >> Manager - Cloud & DevOps
> > > >> IndiQus Technologies
> > > >> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > >> www.indiqus.com <http://indiqus.com/>
> > > >>
> > > >> This message is intended only for the use of the individual or entity
> > to which it is addressed and may contain information that is confidential
> > and/or privileged. If you are not the intended recipient please delete the
> > original message and any copy of it from your computer system. You are
> > hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited unless proper authorization has been
> > obtained for such action. If you have received this communication in error,
> > please notify the sender immediately. Although IndiQus attempts to sweep
> > e-mail and attachments for viruses, it does not guarantee that both are
> > virus-free and accepts no liability for any damage sustained as a result of
> > viruses.
> > > >>
> > > >>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com>
> > wrote:
> > > >>>
> > > >>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> > > >>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> > > >>>
> > > >>> Thanks,
> > > >>> Tobin
> > > >>>
> > > >>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com>
> > wrote:
> > > >>>>
> > > >>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to
> > SSVM) and
> > > >>>> run the check script:
> > > >>>>
> > > >>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> > > >>>> /usr/local/cloud/systemvm/ssvm-check.sh
> > > >>>>
> > > >>>> and report back the results - there is check if VM can ping 8,8.8.8
> > (public
> > > >>>> network works fine - ssvm can access internet), there is check if
> > the agent
> > > >>>> can connect to mgmt server (agent status can be reported to mgmt)
> > and also
> > > >>>> if Secondary Storage is mounted and printable (check the IP - with
> > some
> > > >>>> network misconfiguration, the Sec Stor NFS is reported with some
> > funny IP
> > > >>>> address)
> > > >>>>
> > > >>>> Cheers
> > > >>>> Andrija
> > > >>>>
> > > >>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com>
> > wrote:
> > > >>>>
> > > >>>>> Hi,
> > > >>>>>
> > > >>>>> The global settings host field has the value of 192.168.0.186
> > which is
> > > >>>>> the correct address for the host.
> > > >>>>>
> > > >>>>> If I "View console" a blank pop up appears. If I try to ssh into
> > the
> > > >>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> > > >>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> > > >>>>>
> > > >>>>> Thanks,
> > > >>>>> Tobin
> > > >>>>>
> > > >>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com>
> > wrote:
> > > >>>>>>
> > > >>>>>> Hello Tobin,
> > > >>>>>>
> > > >>>>>> Agent state must be in ‘UP’ state. Then it will download the
> > default
> > > >>>>> template.  Can you just login to the system VM and check the
> > > >>>>> /var/log/cloud.log. Can you also verify the host setting in global
> > setting.
> > > >>>>> Just click on the global setting and type ‘host’ in search button
> > and
> > > >>>>> enter. What do you see ? There should be your management IP, can
> > you verify
> > > >>>>> that ?
> > > >>>>>>
> > > >>>>>>
> > > >>>>>> Vivek Kumar
> > > >>>>>> Manager - Cloud & DevOps
> > > >>>>>> IndiQus Technologies
> > > >>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > >>>>>> www.indiqus.com <http://indiqus.com/>
> > > >>>>>>
> > > >>>>>> This message is intended only for the use of the individual or
> > entity to
> > > >>>>> which it is addressed and may contain information that is
> > confidential
> > > >>>>> and/or privileged. If you are not the intended recipient please
> > delete the
> > > >>>>> original message and any copy of it from your computer system. You
> > are
> > > >>>>> hereby notified that any dissemination, distribution or copying of
> > this
> > > >>>>> communication is strictly prohibited unless proper authorization
> > has been
> > > >>>>> obtained for such action. If you have received this communication
> > in error,
> > > >>>>> please notify the sender immediately. Although IndiQus attempts to
> > sweep
> > > >>>>> e-mail and attachments for viruses, it does not guarantee that
> > both are
> > > >>>>> virus-free and accepts no liability for any damage sustained as a
> > result of
> > > >>>>> viruses.
> > > >>>>>>
> > > >>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com>
> > wrote:
> > > >>>>>>>
> > > >>>>>>> Hi,
> > > >>>>>>>
> > > >>>>>>> I've completed the instructions at
> > > >>>>>>>
> > > >>>>>
> > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > > >>>>>>>
> > > >>>>>>> 1.
> > > >>>>>>>
> > > >>>>>>> Home > Infrastructure > System VMs now displays two VMs with a
> > "VM
> > > >>>>>>> state" of "Running" and an "Agent State" of "-".
> > > >>>>>>>
> > > >>>>>>> Is this normal?
> > > >>>>>>>
> > > >>>>>>> 2.
> > > >>>>>>>
> > > >>>>>>> If I select "New Instance" it displays no templates.
> > > >>>>>>>
> > > >>>>>>> Surely the default template should be visible?
> > > >>>>>>>
> > > >>>>>>> 3.
> > > >>>>>>>
> > > >>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> > > >>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack
> > SystemVM
> > > >>>>>>> 4.11.2.0", etc.
> > > >>>>>>>
> > > >>>>>>> Please advise.
> > > >>>>>>>
> > > >>>>>>> Regards,
> > > >>>>>>> Tobin
> > > >>>>>>
> > > >>>>>
> > > >>>>
> > > >>>>
> > > >>>> --
> > > >>>>
> > > >>>> Andrija Panić
> > > >>
> > >
> >

Re: Quick installation guide issue

Posted by Vivek Kumar <vi...@indiqus.com>.
If it is asking password when for virt-viewer ? Then run 

# virsh list

Find the name then run 

# virsh edit <Name> ( It will show the VNC password but make sure you don’t change anything ).

Then use this password for view the console of your machine.




Vivek Kumar
Manager - Cloud & DevOps 
IndiQus Technologies
24*7  O +91 11 4055 1411  |   M +91 7503460090 
www.indiqus.com <http://indiqus.com/>

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.

> On 04-Apr-2020, at 3:20 PM, Andrija Panic <an...@gmail.com> wrote:
> 
> root / password is the login to ssvm/cpvm/VRs
> 
> On Fri, 3 Apr 2020, 23:39 tobin, <to...@gmail.com> wrote:
> 
>> I've installed virt-manager on the box. When I select "Open" against
>> the SSMV I get a password prompt.
>> 
>> Please advise?
>> 
>> On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
>>> 
>>> No but it helps as part of troubleshooting specially on KVM hosts.
>> Because other hypervisor i.e Xenserver and VMware you can view the console
>> without doing the SSH.
>>> 
>>> Vivek Kumar
>>> Manager - Cloud & DevOps
>>> IndiQus Technologies
>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>> www.indiqus.com <http://indiqus.com/>
>>> 
>>> This message is intended only for the use of the individual or entity to
>> which it is addressed and may contain information that is confidential
>> and/or privileged. If you are not the intended recipient please delete the
>> original message and any copy of it from your computer system. You are
>> hereby notified that any dissemination, distribution or copying of this
>> communication is strictly prohibited unless proper authorization has been
>> obtained for such action. If you have received this communication in error,
>> please notify the sender immediately. Although IndiQus attempts to sweep
>> e-mail and attachments for viruses, it does not guarantee that both are
>> virus-free and accepts no liability for any damage sustained as a result of
>> viruses.
>>> 
>>>> On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
>>>> 
>>>> Hi,
>>>> 
>>>> I just followed the quick installation guide. Is it missing something?
>>>> 
>>>> Thanks,
>>>> Tobin
>>>> 
>>>> On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com>
>> wrote:
>>>>> 
>>>>> Dont you have GUI installed on your KVM host where you can take the
>> console of your system VMs via virt-viewer. It’s good practice part of
>> troubleshooting purpose if you have GUI installed on KVM host if your SSH
>> doesn’t work somehow to the system VM.
>>>>> 
>>>>> 
>>>>> Vivek Kumar
>>>>> Manager - Cloud & DevOps
>>>>> IndiQus Technologies
>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>>>> www.indiqus.com <http://indiqus.com/>
>>>>> 
>>>>> This message is intended only for the use of the individual or entity
>> to which it is addressed and may contain information that is confidential
>> and/or privileged. If you are not the intended recipient please delete the
>> original message and any copy of it from your computer system. You are
>> hereby notified that any dissemination, distribution or copying of this
>> communication is strictly prohibited unless proper authorization has been
>> obtained for such action. If you have received this communication in error,
>> please notify the sender immediately. Although IndiQus attempts to sweep
>> e-mail and attachments for viruses, it does not guarantee that both are
>> virus-free and accepts no liability for any damage sustained as a result of
>> viruses.
>>>>> 
>>>>>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com>
>> wrote:
>>>>>> 
>>>>>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
>>>>>> ssh: connect to host 169.254.3.206 port 3922: No route to host
>>>>>> 
>>>>>> Thanks,
>>>>>> Tobin
>>>>>> 
>>>>>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com>
>> wrote:
>>>>>>> 
>>>>>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to
>> SSVM) and
>>>>>>> run the check script:
>>>>>>> 
>>>>>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
>>>>>>> /usr/local/cloud/systemvm/ssvm-check.sh
>>>>>>> 
>>>>>>> and report back the results - there is check if VM can ping 8,8.8.8
>> (public
>>>>>>> network works fine - ssvm can access internet), there is check if
>> the agent
>>>>>>> can connect to mgmt server (agent status can be reported to mgmt)
>> and also
>>>>>>> if Secondary Storage is mounted and printable (check the IP - with
>> some
>>>>>>> network misconfiguration, the Sec Stor NFS is reported with some
>> funny IP
>>>>>>> address)
>>>>>>> 
>>>>>>> Cheers
>>>>>>> Andrija
>>>>>>> 
>>>>>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com>
>> wrote:
>>>>>>> 
>>>>>>>> Hi,
>>>>>>>> 
>>>>>>>> The global settings host field has the value of 192.168.0.186
>> which is
>>>>>>>> the correct address for the host.
>>>>>>>> 
>>>>>>>> If I "View console" a blank pop up appears. If I try to ssh into
>> the
>>>>>>>> the SSVM, I get "No route to host". It exists, as `virsh console
>>>>>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
>>>>>>>> 
>>>>>>>> Thanks,
>>>>>>>> Tobin
>>>>>>>> 
>>>>>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com>
>> wrote:
>>>>>>>>> 
>>>>>>>>> Hello Tobin,
>>>>>>>>> 
>>>>>>>>> Agent state must be in ‘UP’ state. Then it will download the
>> default
>>>>>>>> template.  Can you just login to the system VM and check the
>>>>>>>> /var/log/cloud.log. Can you also verify the host setting in global
>> setting.
>>>>>>>> Just click on the global setting and type ‘host’ in search button
>> and
>>>>>>>> enter. What do you see ? There should be your management IP, can
>> you verify
>>>>>>>> that ?
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> Vivek Kumar
>>>>>>>>> Manager - Cloud & DevOps
>>>>>>>>> IndiQus Technologies
>>>>>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>>>>>>>> www.indiqus.com <http://indiqus.com/>
>>>>>>>>> 
>>>>>>>>> This message is intended only for the use of the individual or
>> entity to
>>>>>>>> which it is addressed and may contain information that is
>> confidential
>>>>>>>> and/or privileged. If you are not the intended recipient please
>> delete the
>>>>>>>> original message and any copy of it from your computer system. You
>> are
>>>>>>>> hereby notified that any dissemination, distribution or copying of
>> this
>>>>>>>> communication is strictly prohibited unless proper authorization
>> has been
>>>>>>>> obtained for such action. If you have received this communication
>> in error,
>>>>>>>> please notify the sender immediately. Although IndiQus attempts to
>> sweep
>>>>>>>> e-mail and attachments for viruses, it does not guarantee that
>> both are
>>>>>>>> virus-free and accepts no liability for any damage sustained as a
>> result of
>>>>>>>> viruses.
>>>>>>>>> 
>>>>>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com>
>> wrote:
>>>>>>>>>> 
>>>>>>>>>> Hi,
>>>>>>>>>> 
>>>>>>>>>> I've completed the instructions at
>>>>>>>>>> 
>>>>>>>> 
>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
>>>>>>>>>> 
>>>>>>>>>> 1.
>>>>>>>>>> 
>>>>>>>>>> Home > Infrastructure > System VMs now displays two VMs with a
>> "VM
>>>>>>>>>> state" of "Running" and an "Agent State" of "-".
>>>>>>>>>> 
>>>>>>>>>> Is this normal?
>>>>>>>>>> 
>>>>>>>>>> 2.
>>>>>>>>>> 
>>>>>>>>>> If I select "New Instance" it displays no templates.
>>>>>>>>>> 
>>>>>>>>>> Surely the default template should be visible?
>>>>>>>>>> 
>>>>>>>>>> 3.
>>>>>>>>>> 
>>>>>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
>>>>>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack
>> SystemVM
>>>>>>>>>> 4.11.2.0", etc.
>>>>>>>>>> 
>>>>>>>>>> Please advise.
>>>>>>>>>> 
>>>>>>>>>> Regards,
>>>>>>>>>> Tobin
>>>>>>>>> 
>>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> --
>>>>>>> 
>>>>>>> Andrija Panić
>>>>> 
>>> 
>>

Re: Quick installation guide issue

Posted by Andrija Panic <an...@gmail.com>.
root / password is the login to ssvm/cpvm/VRs

On Fri, 3 Apr 2020, 23:39 tobin, <to...@gmail.com> wrote:

> I've installed virt-manager on the box. When I select "Open" against
> the SSMV I get a password prompt.
>
> Please advise?
>
> On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
> >
> > No but it helps as part of troubleshooting specially on KVM hosts.
> Because other hypervisor i.e Xenserver and VMware you can view the console
> without doing the SSH.
> >
> > Vivek Kumar
> > Manager - Cloud & DevOps
> > IndiQus Technologies
> > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > www.indiqus.com <http://indiqus.com/>
> >
> > This message is intended only for the use of the individual or entity to
> which it is addressed and may contain information that is confidential
> and/or privileged. If you are not the intended recipient please delete the
> original message and any copy of it from your computer system. You are
> hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited unless proper authorization has been
> obtained for such action. If you have received this communication in error,
> please notify the sender immediately. Although IndiQus attempts to sweep
> e-mail and attachments for viruses, it does not guarantee that both are
> virus-free and accepts no liability for any damage sustained as a result of
> viruses.
> >
> > > On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> > >
> > > Hi,
> > >
> > > I just followed the quick installation guide. Is it missing something?
> > >
> > > Thanks,
> > > Tobin
> > >
> > > On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com>
> wrote:
> > >>
> > >> Dont you have GUI installed on your KVM host where you can take the
> console of your system VMs via virt-viewer. It’s good practice part of
> troubleshooting purpose if you have GUI installed on KVM host if your SSH
> doesn’t work somehow to the system VM.
> > >>
> > >>
> > >> Vivek Kumar
> > >> Manager - Cloud & DevOps
> > >> IndiQus Technologies
> > >> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > >> www.indiqus.com <http://indiqus.com/>
> > >>
> > >> This message is intended only for the use of the individual or entity
> to which it is addressed and may contain information that is confidential
> and/or privileged. If you are not the intended recipient please delete the
> original message and any copy of it from your computer system. You are
> hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited unless proper authorization has been
> obtained for such action. If you have received this communication in error,
> please notify the sender immediately. Although IndiQus attempts to sweep
> e-mail and attachments for viruses, it does not guarantee that both are
> virus-free and accepts no liability for any damage sustained as a result of
> viruses.
> > >>
> > >>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com>
> wrote:
> > >>>
> > >>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> > >>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> > >>>
> > >>> Thanks,
> > >>> Tobin
> > >>>
> > >>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com>
> wrote:
> > >>>>
> > >>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to
> SSVM) and
> > >>>> run the check script:
> > >>>>
> > >>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> > >>>> /usr/local/cloud/systemvm/ssvm-check.sh
> > >>>>
> > >>>> and report back the results - there is check if VM can ping 8,8.8.8
> (public
> > >>>> network works fine - ssvm can access internet), there is check if
> the agent
> > >>>> can connect to mgmt server (agent status can be reported to mgmt)
> and also
> > >>>> if Secondary Storage is mounted and printable (check the IP - with
> some
> > >>>> network misconfiguration, the Sec Stor NFS is reported with some
> funny IP
> > >>>> address)
> > >>>>
> > >>>> Cheers
> > >>>> Andrija
> > >>>>
> > >>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com>
> wrote:
> > >>>>
> > >>>>> Hi,
> > >>>>>
> > >>>>> The global settings host field has the value of 192.168.0.186
> which is
> > >>>>> the correct address for the host.
> > >>>>>
> > >>>>> If I "View console" a blank pop up appears. If I try to ssh into
> the
> > >>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> > >>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> > >>>>>
> > >>>>> Thanks,
> > >>>>> Tobin
> > >>>>>
> > >>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com>
> wrote:
> > >>>>>>
> > >>>>>> Hello Tobin,
> > >>>>>>
> > >>>>>> Agent state must be in ‘UP’ state. Then it will download the
> default
> > >>>>> template.  Can you just login to the system VM and check the
> > >>>>> /var/log/cloud.log. Can you also verify the host setting in global
> setting.
> > >>>>> Just click on the global setting and type ‘host’ in search button
> and
> > >>>>> enter. What do you see ? There should be your management IP, can
> you verify
> > >>>>> that ?
> > >>>>>>
> > >>>>>>
> > >>>>>> Vivek Kumar
> > >>>>>> Manager - Cloud & DevOps
> > >>>>>> IndiQus Technologies
> > >>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > >>>>>> www.indiqus.com <http://indiqus.com/>
> > >>>>>>
> > >>>>>> This message is intended only for the use of the individual or
> entity to
> > >>>>> which it is addressed and may contain information that is
> confidential
> > >>>>> and/or privileged. If you are not the intended recipient please
> delete the
> > >>>>> original message and any copy of it from your computer system. You
> are
> > >>>>> hereby notified that any dissemination, distribution or copying of
> this
> > >>>>> communication is strictly prohibited unless proper authorization
> has been
> > >>>>> obtained for such action. If you have received this communication
> in error,
> > >>>>> please notify the sender immediately. Although IndiQus attempts to
> sweep
> > >>>>> e-mail and attachments for viruses, it does not guarantee that
> both are
> > >>>>> virus-free and accepts no liability for any damage sustained as a
> result of
> > >>>>> viruses.
> > >>>>>>
> > >>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com>
> wrote:
> > >>>>>>>
> > >>>>>>> Hi,
> > >>>>>>>
> > >>>>>>> I've completed the instructions at
> > >>>>>>>
> > >>>>>
> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > >>>>>>>
> > >>>>>>> 1.
> > >>>>>>>
> > >>>>>>> Home > Infrastructure > System VMs now displays two VMs with a
> "VM
> > >>>>>>> state" of "Running" and an "Agent State" of "-".
> > >>>>>>>
> > >>>>>>> Is this normal?
> > >>>>>>>
> > >>>>>>> 2.
> > >>>>>>>
> > >>>>>>> If I select "New Instance" it displays no templates.
> > >>>>>>>
> > >>>>>>> Surely the default template should be visible?
> > >>>>>>>
> > >>>>>>> 3.
> > >>>>>>>
> > >>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> > >>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack
> SystemVM
> > >>>>>>> 4.11.2.0", etc.
> > >>>>>>>
> > >>>>>>> Please advise.
> > >>>>>>>
> > >>>>>>> Regards,
> > >>>>>>> Tobin
> > >>>>>>
> > >>>>>
> > >>>>
> > >>>>
> > >>>> --
> > >>>>
> > >>>> Andrija Panić
> > >>
> >
>

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
I've installed virt-manager on the box. When I select "Open" against
the SSMV I get a password prompt.

Please advise?

On Fri, 3 Apr 2020 at 21:36, Vivek Kumar <vi...@indiqus.com> wrote:
>
> No but it helps as part of troubleshooting specially on KVM hosts. Because other hypervisor i.e Xenserver and VMware you can view the console without doing the SSH.
>
> Vivek Kumar
> Manager - Cloud & DevOps
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> www.indiqus.com <http://indiqus.com/>
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>
> > On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> >
> > Hi,
> >
> > I just followed the quick installation guide. Is it missing something?
> >
> > Thanks,
> > Tobin
> >
> > On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com> wrote:
> >>
> >> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
> >>
> >>
> >> Vivek Kumar
> >> Manager - Cloud & DevOps
> >> IndiQus Technologies
> >> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >> www.indiqus.com <http://indiqus.com/>
> >>
> >> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
> >>
> >>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com> wrote:
> >>>
> >>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> >>> ssh: connect to host 169.254.3.206 port 3922: No route to host
> >>>
> >>> Thanks,
> >>> Tobin
> >>>
> >>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
> >>>>
> >>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
> >>>> run the check script:
> >>>>
> >>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> >>>> /usr/local/cloud/systemvm/ssvm-check.sh
> >>>>
> >>>> and report back the results - there is check if VM can ping 8,8.8.8 (public
> >>>> network works fine - ssvm can access internet), there is check if the agent
> >>>> can connect to mgmt server (agent status can be reported to mgmt) and also
> >>>> if Secondary Storage is mounted and printable (check the IP - with some
> >>>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
> >>>> address)
> >>>>
> >>>> Cheers
> >>>> Andrija
> >>>>
> >>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
> >>>>
> >>>>> Hi,
> >>>>>
> >>>>> The global settings host field has the value of 192.168.0.186 which is
> >>>>> the correct address for the host.
> >>>>>
> >>>>> If I "View console" a blank pop up appears. If I try to ssh into the
> >>>>> the SSVM, I get "No route to host". It exists, as `virsh console
> >>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> >>>>>
> >>>>> Thanks,
> >>>>> Tobin
> >>>>>
> >>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
> >>>>>>
> >>>>>> Hello Tobin,
> >>>>>>
> >>>>>> Agent state must be in ‘UP’ state. Then it will download the default
> >>>>> template.  Can you just login to the system VM and check the
> >>>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
> >>>>> Just click on the global setting and type ‘host’ in search button and
> >>>>> enter. What do you see ? There should be your management IP, can you verify
> >>>>> that ?
> >>>>>>
> >>>>>>
> >>>>>> Vivek Kumar
> >>>>>> Manager - Cloud & DevOps
> >>>>>> IndiQus Technologies
> >>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >>>>>> www.indiqus.com <http://indiqus.com/>
> >>>>>>
> >>>>>> This message is intended only for the use of the individual or entity to
> >>>>> which it is addressed and may contain information that is confidential
> >>>>> and/or privileged. If you are not the intended recipient please delete the
> >>>>> original message and any copy of it from your computer system. You are
> >>>>> hereby notified that any dissemination, distribution or copying of this
> >>>>> communication is strictly prohibited unless proper authorization has been
> >>>>> obtained for such action. If you have received this communication in error,
> >>>>> please notify the sender immediately. Although IndiQus attempts to sweep
> >>>>> e-mail and attachments for viruses, it does not guarantee that both are
> >>>>> virus-free and accepts no liability for any damage sustained as a result of
> >>>>> viruses.
> >>>>>>
> >>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> >>>>>>>
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> I've completed the instructions at
> >>>>>>>
> >>>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> >>>>>>>
> >>>>>>> 1.
> >>>>>>>
> >>>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
> >>>>>>> state" of "Running" and an "Agent State" of "-".
> >>>>>>>
> >>>>>>> Is this normal?
> >>>>>>>
> >>>>>>> 2.
> >>>>>>>
> >>>>>>> If I select "New Instance" it displays no templates.
> >>>>>>>
> >>>>>>> Surely the default template should be visible?
> >>>>>>>
> >>>>>>> 3.
> >>>>>>>
> >>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> >>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> >>>>>>> 4.11.2.0", etc.
> >>>>>>>
> >>>>>>> Please advise.
> >>>>>>>
> >>>>>>> Regards,
> >>>>>>> Tobin
> >>>>>>
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>>
> >>>> Andrija Panić
> >>
>

Re: Quick installation guide issue

Posted by Vivek Kumar <vi...@indiqus.com>.
No but it helps as part of troubleshooting specially on KVM hosts. Because other hypervisor i.e Xenserver and VMware you can view the console without doing the SSH. 

Vivek Kumar
Manager - Cloud & DevOps 
IndiQus Technologies
24*7  O +91 11 4055 1411  |   M +91 7503460090 
www.indiqus.com <http://indiqus.com/>

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.

> On 04-Apr-2020, at 2:03 AM, tobin <to...@gmail.com> wrote:
> 
> Hi,
> 
> I just followed the quick installation guide. Is it missing something?
> 
> Thanks,
> Tobin
> 
> On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com> wrote:
>> 
>> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
>> 
>> 
>> Vivek Kumar
>> Manager - Cloud & DevOps
>> IndiQus Technologies
>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>> www.indiqus.com <http://indiqus.com/>
>> 
>> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>> 
>>> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com> wrote:
>>> 
>>> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
>>> ssh: connect to host 169.254.3.206 port 3922: No route to host
>>> 
>>> Thanks,
>>> Tobin
>>> 
>>> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
>>>> 
>>>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
>>>> run the check script:
>>>> 
>>>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
>>>> /usr/local/cloud/systemvm/ssvm-check.sh
>>>> 
>>>> and report back the results - there is check if VM can ping 8,8.8.8 (public
>>>> network works fine - ssvm can access internet), there is check if the agent
>>>> can connect to mgmt server (agent status can be reported to mgmt) and also
>>>> if Secondary Storage is mounted and printable (check the IP - with some
>>>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
>>>> address)
>>>> 
>>>> Cheers
>>>> Andrija
>>>> 
>>>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
>>>> 
>>>>> Hi,
>>>>> 
>>>>> The global settings host field has the value of 192.168.0.186 which is
>>>>> the correct address for the host.
>>>>> 
>>>>> If I "View console" a blank pop up appears. If I try to ssh into the
>>>>> the SSVM, I get "No route to host". It exists, as `virsh console
>>>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
>>>>> 
>>>>> Thanks,
>>>>> Tobin
>>>>> 
>>>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
>>>>>> 
>>>>>> Hello Tobin,
>>>>>> 
>>>>>> Agent state must be in ‘UP’ state. Then it will download the default
>>>>> template.  Can you just login to the system VM and check the
>>>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
>>>>> Just click on the global setting and type ‘host’ in search button and
>>>>> enter. What do you see ? There should be your management IP, can you verify
>>>>> that ?
>>>>>> 
>>>>>> 
>>>>>> Vivek Kumar
>>>>>> Manager - Cloud & DevOps
>>>>>> IndiQus Technologies
>>>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>>>>> www.indiqus.com <http://indiqus.com/>
>>>>>> 
>>>>>> This message is intended only for the use of the individual or entity to
>>>>> which it is addressed and may contain information that is confidential
>>>>> and/or privileged. If you are not the intended recipient please delete the
>>>>> original message and any copy of it from your computer system. You are
>>>>> hereby notified that any dissemination, distribution or copying of this
>>>>> communication is strictly prohibited unless proper authorization has been
>>>>> obtained for such action. If you have received this communication in error,
>>>>> please notify the sender immediately. Although IndiQus attempts to sweep
>>>>> e-mail and attachments for viruses, it does not guarantee that both are
>>>>> virus-free and accepts no liability for any damage sustained as a result of
>>>>> viruses.
>>>>>> 
>>>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
>>>>>>> 
>>>>>>> Hi,
>>>>>>> 
>>>>>>> I've completed the instructions at
>>>>>>> 
>>>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
>>>>>>> 
>>>>>>> 1.
>>>>>>> 
>>>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
>>>>>>> state" of "Running" and an "Agent State" of "-".
>>>>>>> 
>>>>>>> Is this normal?
>>>>>>> 
>>>>>>> 2.
>>>>>>> 
>>>>>>> If I select "New Instance" it displays no templates.
>>>>>>> 
>>>>>>> Surely the default template should be visible?
>>>>>>> 
>>>>>>> 3.
>>>>>>> 
>>>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
>>>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
>>>>>>> 4.11.2.0", etc.
>>>>>>> 
>>>>>>> Please advise.
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Tobin
>>>>>> 
>>>>> 
>>>> 
>>>> 
>>>> --
>>>> 
>>>> Andrija Panić
>>

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
Hi,

I just followed the quick installation guide. Is it missing something?

Thanks,
Tobin

On Fri, 3 Apr 2020 at 21:31, Vivek Kumar <vi...@indiqus.com> wrote:
>
> Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
>
>
> Vivek Kumar
> Manager - Cloud & DevOps
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> www.indiqus.com <http://indiqus.com/>
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>
> > On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com> wrote:
> >
> > # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> > ssh: connect to host 169.254.3.206 port 3922: No route to host
> >
> > Thanks,
> > Tobin
> >
> > On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
> >>
> >> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
> >> run the check script:
> >>
> >> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> >> /usr/local/cloud/systemvm/ssvm-check.sh
> >>
> >> and report back the results - there is check if VM can ping 8,8.8.8 (public
> >> network works fine - ssvm can access internet), there is check if the agent
> >> can connect to mgmt server (agent status can be reported to mgmt) and also
> >> if Secondary Storage is mounted and printable (check the IP - with some
> >> network misconfiguration, the Sec Stor NFS is reported with some funny IP
> >> address)
> >>
> >> Cheers
> >> Andrija
> >>
> >> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
> >>
> >>> Hi,
> >>>
> >>> The global settings host field has the value of 192.168.0.186 which is
> >>> the correct address for the host.
> >>>
> >>> If I "View console" a blank pop up appears. If I try to ssh into the
> >>> the SSVM, I get "No route to host". It exists, as `virsh console
> >>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> >>>
> >>> Thanks,
> >>> Tobin
> >>>
> >>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
> >>>>
> >>>> Hello Tobin,
> >>>>
> >>>> Agent state must be in ‘UP’ state. Then it will download the default
> >>> template.  Can you just login to the system VM and check the
> >>> /var/log/cloud.log. Can you also verify the host setting in global setting.
> >>> Just click on the global setting and type ‘host’ in search button and
> >>> enter. What do you see ? There should be your management IP, can you verify
> >>> that ?
> >>>>
> >>>>
> >>>> Vivek Kumar
> >>>> Manager - Cloud & DevOps
> >>>> IndiQus Technologies
> >>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> >>>> www.indiqus.com <http://indiqus.com/>
> >>>>
> >>>> This message is intended only for the use of the individual or entity to
> >>> which it is addressed and may contain information that is confidential
> >>> and/or privileged. If you are not the intended recipient please delete the
> >>> original message and any copy of it from your computer system. You are
> >>> hereby notified that any dissemination, distribution or copying of this
> >>> communication is strictly prohibited unless proper authorization has been
> >>> obtained for such action. If you have received this communication in error,
> >>> please notify the sender immediately. Although IndiQus attempts to sweep
> >>> e-mail and attachments for viruses, it does not guarantee that both are
> >>> virus-free and accepts no liability for any damage sustained as a result of
> >>> viruses.
> >>>>
> >>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> I've completed the instructions at
> >>>>>
> >>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> >>>>>
> >>>>> 1.
> >>>>>
> >>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
> >>>>> state" of "Running" and an "Agent State" of "-".
> >>>>>
> >>>>> Is this normal?
> >>>>>
> >>>>> 2.
> >>>>>
> >>>>> If I select "New Instance" it displays no templates.
> >>>>>
> >>>>> Surely the default template should be visible?
> >>>>>
> >>>>> 3.
> >>>>>
> >>>>> If I try to ssh into the the SSVM, I get "No route to host". It
> >>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> >>>>> 4.11.2.0", etc.
> >>>>>
> >>>>> Please advise.
> >>>>>
> >>>>> Regards,
> >>>>> Tobin
> >>>>
> >>>
> >>
> >>
> >> --
> >>
> >> Andrija Panić
>

Re: Quick installation guide issue

Posted by Vivek Kumar <vi...@indiqus.com>.
Dont you have GUI installed on your KVM host where you can take the console of your system VMs via virt-viewer. It’s good practice part of troubleshooting purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow to the system VM.
 

Vivek Kumar
Manager - Cloud & DevOps 
IndiQus Technologies
24*7  O +91 11 4055 1411  |   M +91 7503460090 
www.indiqus.com <http://indiqus.com/>

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.

> On 04-Apr-2020, at 1:45 AM, tobin <to...@gmail.com> wrote:
> 
> # ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
> ssh: connect to host 169.254.3.206 port 3922: No route to host
> 
> Thanks,
> Tobin
> 
> On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
>> 
>> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
>> run the check script:
>> 
>> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
>> /usr/local/cloud/systemvm/ssvm-check.sh
>> 
>> and report back the results - there is check if VM can ping 8,8.8.8 (public
>> network works fine - ssvm can access internet), there is check if the agent
>> can connect to mgmt server (agent status can be reported to mgmt) and also
>> if Secondary Storage is mounted and printable (check the IP - with some
>> network misconfiguration, the Sec Stor NFS is reported with some funny IP
>> address)
>> 
>> Cheers
>> Andrija
>> 
>> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
>> 
>>> Hi,
>>> 
>>> The global settings host field has the value of 192.168.0.186 which is
>>> the correct address for the host.
>>> 
>>> If I "View console" a blank pop up appears. If I try to ssh into the
>>> the SSVM, I get "No route to host". It exists, as `virsh console
>>> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
>>> 
>>> Thanks,
>>> Tobin
>>> 
>>> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
>>>> 
>>>> Hello Tobin,
>>>> 
>>>> Agent state must be in ‘UP’ state. Then it will download the default
>>> template.  Can you just login to the system VM and check the
>>> /var/log/cloud.log. Can you also verify the host setting in global setting.
>>> Just click on the global setting and type ‘host’ in search button and
>>> enter. What do you see ? There should be your management IP, can you verify
>>> that ?
>>>> 
>>>> 
>>>> Vivek Kumar
>>>> Manager - Cloud & DevOps
>>>> IndiQus Technologies
>>>> 24*7  O +91 11 4055 1411  |   M +91 7503460090
>>>> www.indiqus.com <http://indiqus.com/>
>>>> 
>>>> This message is intended only for the use of the individual or entity to
>>> which it is addressed and may contain information that is confidential
>>> and/or privileged. If you are not the intended recipient please delete the
>>> original message and any copy of it from your computer system. You are
>>> hereby notified that any dissemination, distribution or copying of this
>>> communication is strictly prohibited unless proper authorization has been
>>> obtained for such action. If you have received this communication in error,
>>> please notify the sender immediately. Although IndiQus attempts to sweep
>>> e-mail and attachments for viruses, it does not guarantee that both are
>>> virus-free and accepts no liability for any damage sustained as a result of
>>> viruses.
>>>> 
>>>>> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
>>>>> 
>>>>> Hi,
>>>>> 
>>>>> I've completed the instructions at
>>>>> 
>>> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
>>>>> 
>>>>> 1.
>>>>> 
>>>>> Home > Infrastructure > System VMs now displays two VMs with a "VM
>>>>> state" of "Running" and an "Agent State" of "-".
>>>>> 
>>>>> Is this normal?
>>>>> 
>>>>> 2.
>>>>> 
>>>>> If I select "New Instance" it displays no templates.
>>>>> 
>>>>> Surely the default template should be visible?
>>>>> 
>>>>> 3.
>>>>> 
>>>>> If I try to ssh into the the SSVM, I get "No route to host". It
>>>>> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
>>>>> 4.11.2.0", etc.
>>>>> 
>>>>> Please advise.
>>>>> 
>>>>> Regards,
>>>>> Tobin
>>>> 
>>> 
>> 
>> 
>> --
>> 
>> Andrija Panić

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
# ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.3.206
ssh: connect to host 169.254.3.206 port 3922: No route to host

Thanks,
Tobin

On Fri, 3 Apr 2020 at 21:13, Andrija Panic <an...@gmail.com> wrote:
>
> login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
> run the check script:
>
> ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
> /usr/local/cloud/systemvm/ssvm-check.sh
>
> and report back the results - there is check if VM can ping 8,8.8.8 (public
> network works fine - ssvm can access internet), there is check if the agent
> can connect to mgmt server (agent status can be reported to mgmt) and also
> if Secondary Storage is mounted and printable (check the IP - with some
> network misconfiguration, the Sec Stor NFS is reported with some funny IP
> address)
>
> Cheers
> Andrija
>
> On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:
>
> > Hi,
> >
> > The global settings host field has the value of 192.168.0.186 which is
> > the correct address for the host.
> >
> > If I "View console" a blank pop up appears. If I try to ssh into the
> > the SSVM, I get "No route to host". It exists, as `virsh console
> > s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
> >
> > Thanks,
> > Tobin
> >
> > On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
> > >
> > > Hello Tobin,
> > >
> > > Agent state must be in ‘UP’ state. Then it will download the default
> > template.  Can you just login to the system VM and check the
> > /var/log/cloud.log. Can you also verify the host setting in global setting.
> > Just click on the global setting and type ‘host’ in search button and
> > enter. What do you see ? There should be your management IP, can you verify
> > that ?
> > >
> > >
> > > Vivek Kumar
> > > Manager - Cloud & DevOps
> > > IndiQus Technologies
> > > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > > www.indiqus.com <http://indiqus.com/>
> > >
> > > This message is intended only for the use of the individual or entity to
> > which it is addressed and may contain information that is confidential
> > and/or privileged. If you are not the intended recipient please delete the
> > original message and any copy of it from your computer system. You are
> > hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited unless proper authorization has been
> > obtained for such action. If you have received this communication in error,
> > please notify the sender immediately. Although IndiQus attempts to sweep
> > e-mail and attachments for viruses, it does not guarantee that both are
> > virus-free and accepts no liability for any damage sustained as a result of
> > viruses.
> > >
> > > > On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I've completed the instructions at
> > > >
> > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > > >
> > > > 1.
> > > >
> > > > Home > Infrastructure > System VMs now displays two VMs with a "VM
> > > > state" of "Running" and an "Agent State" of "-".
> > > >
> > > > Is this normal?
> > > >
> > > > 2.
> > > >
> > > > If I select "New Instance" it displays no templates.
> > > >
> > > > Surely the default template should be visible?
> > > >
> > > > 3.
> > > >
> > > > If I try to ssh into the the SSVM, I get "No route to host". It
> > > > exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> > > > 4.11.2.0", etc.
> > > >
> > > > Please advise.
> > > >
> > > > Regards,
> > > > Tobin
> > >
> >
>
>
> --
>
> Andrija Panić

Re: Quick installation guide issue

Posted by Andrija Panic <an...@gmail.com>.
login to inside the SSVM (ssh to KVM host, from KVM host, ssh to SSVM) and
run the check script:

ssh -i /root/.ssh/id_rsa.cloud -p 3922 root@169.254.xxx.yyy
/usr/local/cloud/systemvm/ssvm-check.sh

and report back the results - there is check if VM can ping 8,8.8.8 (public
network works fine - ssvm can access internet), there is check if the agent
can connect to mgmt server (agent status can be reported to mgmt) and also
if Secondary Storage is mounted and printable (check the IP - with some
network misconfiguration, the Sec Stor NFS is reported with some funny IP
address)

Cheers
Andrija

On Fri, 3 Apr 2020 at 22:08, tobin <to...@gmail.com> wrote:

> Hi,
>
> The global settings host field has the value of 192.168.0.186 which is
> the correct address for the host.
>
> If I "View console" a blank pop up appears. If I try to ssh into the
> the SSVM, I get "No route to host". It exists, as `virsh console
> s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.
>
> Thanks,
> Tobin
>
> On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
> >
> > Hello Tobin,
> >
> > Agent state must be in ‘UP’ state. Then it will download the default
> template.  Can you just login to the system VM and check the
> /var/log/cloud.log. Can you also verify the host setting in global setting.
> Just click on the global setting and type ‘host’ in search button and
> enter. What do you see ? There should be your management IP, can you verify
> that ?
> >
> >
> > Vivek Kumar
> > Manager - Cloud & DevOps
> > IndiQus Technologies
> > 24*7  O +91 11 4055 1411  |   M +91 7503460090
> > www.indiqus.com <http://indiqus.com/>
> >
> > This message is intended only for the use of the individual or entity to
> which it is addressed and may contain information that is confidential
> and/or privileged. If you are not the intended recipient please delete the
> original message and any copy of it from your computer system. You are
> hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited unless proper authorization has been
> obtained for such action. If you have received this communication in error,
> please notify the sender immediately. Although IndiQus attempts to sweep
> e-mail and attachments for viruses, it does not guarantee that both are
> virus-free and accepts no liability for any damage sustained as a result of
> viruses.
> >
> > > On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> > >
> > > Hi,
> > >
> > > I've completed the instructions at
> > >
> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> > >
> > > 1.
> > >
> > > Home > Infrastructure > System VMs now displays two VMs with a "VM
> > > state" of "Running" and an "Agent State" of "-".
> > >
> > > Is this normal?
> > >
> > > 2.
> > >
> > > If I select "New Instance" it displays no templates.
> > >
> > > Surely the default template should be visible?
> > >
> > > 3.
> > >
> > > If I try to ssh into the the SSVM, I get "No route to host". It
> > > exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> > > 4.11.2.0", etc.
> > >
> > > Please advise.
> > >
> > > Regards,
> > > Tobin
> >
>


-- 

Andrija Panić

Re: Quick installation guide issue

Posted by tobin <to...@gmail.com>.
Hi,

The global settings host field has the value of 192.168.0.186 which is
the correct address for the host.

If I "View console" a blank pop up appears. If I try to ssh into the
the SSVM, I get "No route to host". It exists, as `virsh console
s-2-VM` shows "Apache CloudStack SystemVM 4.11.2.0", etc.

Thanks,
Tobin

On Fri, 3 Apr 2020 at 21:02, Vivek Kumar <vi...@indiqus.com> wrote:
>
> Hello Tobin,
>
> Agent state must be in ‘UP’ state. Then it will download the default template.  Can you just login to the system VM and check the /var/log/cloud.log. Can you also verify the host setting in global setting. Just click on the global setting and type ‘host’ in search button and enter. What do you see ? There should be your management IP, can you verify that ?
>
>
> Vivek Kumar
> Manager - Cloud & DevOps
> IndiQus Technologies
> 24*7  O +91 11 4055 1411  |   M +91 7503460090
> www.indiqus.com <http://indiqus.com/>
>
> This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.
>
> > On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> >
> > Hi,
> >
> > I've completed the instructions at
> > http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> >
> > 1.
> >
> > Home > Infrastructure > System VMs now displays two VMs with a "VM
> > state" of "Running" and an "Agent State" of "-".
> >
> > Is this normal?
> >
> > 2.
> >
> > If I select "New Instance" it displays no templates.
> >
> > Surely the default template should be visible?
> >
> > 3.
> >
> > If I try to ssh into the the SSVM, I get "No route to host". It
> > exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> > 4.11.2.0", etc.
> >
> > Please advise.
> >
> > Regards,
> > Tobin
>

Re: Quick installation guide issue

Posted by Vivek Kumar <vi...@indiqus.com>.
Hello Tobin,

Agent state must be in ‘UP’ state. Then it will download the default template.  Can you just login to the system VM and check the /var/log/cloud.log. Can you also verify the host setting in global setting. Just click on the global setting and type ‘host’ in search button and enter. What do you see ? There should be your management IP, can you verify that ?


Vivek Kumar
Manager - Cloud & DevOps 
IndiQus Technologies
24*7  O +91 11 4055 1411  |   M +91 7503460090 
www.indiqus.com <http://indiqus.com/>

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential and/or privileged. If you are not the intended recipient please delete the original message and any copy of it from your computer system. You are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited unless proper authorization has been obtained for such action. If you have received this communication in error, please notify the sender immediately. Although IndiQus attempts to sweep e-mail and attachments for viruses, it does not guarantee that both are virus-free and accepts no liability for any damage sustained as a result of viruses.

> On 04-Apr-2020, at 1:24 AM, tobin <to...@gmail.com> wrote:
> 
> Hi,
> 
> I've completed the instructions at
> http://docs.cloudstack.apache.org/en/latest/quickinstallationguide/qig.html
> 
> 1.
> 
> Home > Infrastructure > System VMs now displays two VMs with a "VM
> state" of "Running" and an "Agent State" of "-".
> 
> Is this normal?
> 
> 2.
> 
> If I select "New Instance" it displays no templates.
> 
> Surely the default template should be visible?
> 
> 3.
> 
> If I try to ssh into the the SSVM, I get "No route to host". It
> exists, as `virsh console s-2-VM` shows "Apache CloudStack SystemVM
> 4.11.2.0", etc.
> 
> Please advise.
> 
> Regards,
> Tobin