You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@sentry.apache.org by Kalyan Kumar Kalvagadda <kk...@cloudera.com.INVALID> on 2019/01/18 20:41:53 UTC
Sentry repository is now relocated
Hello all,
Here are the steps to start using the new sentry repository.
There are two ways to use the repo
1. Use Github to push. (*Current process followed*)
2. Use gitbox to push.
If you want to use gitbox to push there are no special steps needed but if
you want to use GitHub(*current process*), please follow below steps for
GitHub write access.
*For existing commitors*
1. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
your GitHub account with your ASF account and setup 2fa.
1. Follow below link to setup 2fa
2.
https://help.github.com/articles/configuring-two-factor-authentication/
3. You can use any mobile for token generation. I have used "*Authy*"
2. Wait about an hours time for things to sync up
3. Great, you now have r/w access to both gitbox.apache.org <
http://gitbox.apache.org> and GitHub!
1. Follow below steps to push code to GitHub
1.
https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
2. This is a one-time process. Once it is done you can reuse
the access token.
*For new contributors*
1. Add yourself to our GitHub organization (see above) and make sure you
are already a committer for the project.
2. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
your GitHub account with your ASF account and setup 2fa.
1. Follow below link to setup 2fa
2.
https://help.github.com/articles/configuring-two-factor-authentication/
3. You can use any mobile for token generation. I have used "*Authy*"
3. Wait about an hours time for things to sync up
4. Great, you now have r/w access to both gitbox.apache.org <
http://gitbox.apache.org> and GitHub!
1. Follow below steps to push code to GitHub
1.
https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
2. This is a one-time process. Once it is done you can reuse
the access token.
-Kalyan
Re: Sentry repository is now relocated
Posted by Kalyan Kumar Kalvagadda <kk...@cloudera.com.INVALID>.
Thanks Colm.
*Thanks,Kalyan Kumar Kalvagadda* | Software Engineer
t. (469) 279- <0000000000>5732
cloudera.com <https://www.cloudera.com>
[image: Cloudera] <https://www.cloudera.com/>
[image: Cloudera on Twitter] <https://twitter.com/cloudera> [image:
Cloudera on Facebook] <https://www.facebook.com/cloudera> [image: Cloudera
on LinkedIn] <https://www.linkedin.com/company/cloudera>
------------------------------
On Sun, Jan 20, 2019 at 5:30 AM Colm O hEigeartaigh <co...@apache.org>
wrote:
> I've updated the two active Jenkins builds to use "
> https://gitbox.apache.org/repos/asf/sentry.git"
>
> Colm.
>
> On Fri, Jan 18, 2019 at 9:39 PM Na Li <li...@cloudera.com.invalid>
> wrote:
>
> > Kakyan,
> >
> > Thanks for getting this done!
> >
> > Lina
> >
> > On Fri, Jan 18, 2019 at 2:42 PM Kalyan Kumar Kalvagadda
> > <kk...@cloudera.com.invalid> wrote:
> >
> > > Hello all,
> > >
> > >
> > > Here are the steps to start using the new sentry repository.
> > >
> > >
> > > There are two ways to use the repo
> > >
> > > 1. Use Github to push. (*Current process followed*)
> > >
> > > 2. Use gitbox to push.
> > >
> > >
> > > If you want to use gitbox to push there are no special steps needed but
> > if
> > > you want to use GitHub(*current process*), please follow below steps
> for
> > > GitHub write access.
> > >
> > >
> > > *For existing commitors*
> > >
> > >
> > > 1. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and
> link
> > > your GitHub account with your ASF account and setup 2fa.
> > > 1. Follow below link to setup 2fa
> > > 2.
> > >
> > >
> https://help.github.com/articles/configuring-two-factor-authentication/
> > > 3. You can use any mobile for token generation. I have used
> > "*Authy*"
> > > 2. Wait about an hours time for things to sync up
> > > 3. Great, you now have r/w access to both gitbox.apache.org <
> > > http://gitbox.apache.org> and GitHub!
> > > 1. Follow below steps to push code to GitHub
> > > 1.
> > >
> > >
> >
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> > > 2. This is a one-time process. Once it is done you can reuse
> > > the access token.
> > >
> > >
> > > *For new contributors*
> > >
> > >
> > > 1. Add yourself to our GitHub organization (see above) and make sure
> > you
> > > are already a committer for the project.
> > > 2. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and
> link
> > > your GitHub account with your ASF account and setup 2fa.
> > > 1. Follow below link to setup 2fa
> > > 2.
> > >
> > >
> https://help.github.com/articles/configuring-two-factor-authentication/
> > > 3. You can use any mobile for token generation. I have used
> > "*Authy*"
> > > 3. Wait about an hours time for things to sync up
> > > 4. Great, you now have r/w access to both gitbox.apache.org <
> > > http://gitbox.apache.org> and GitHub!
> > > 1. Follow below steps to push code to GitHub
> > > 1.
> > >
> > >
> >
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> > > 2. This is a one-time process. Once it is done you can reuse
> > > the access token.
> > >
> > > -Kalyan
> > >
> >
>
>
> --
> Colm O hEigeartaigh
>
> Talend Community Coder
> http://coders.talend.com
>
Re: Sentry repository is now relocated
Posted by Colm O hEigeartaigh <co...@apache.org>.
I've updated the two active Jenkins builds to use "
https://gitbox.apache.org/repos/asf/sentry.git"
Colm.
On Fri, Jan 18, 2019 at 9:39 PM Na Li <li...@cloudera.com.invalid> wrote:
> Kakyan,
>
> Thanks for getting this done!
>
> Lina
>
> On Fri, Jan 18, 2019 at 2:42 PM Kalyan Kumar Kalvagadda
> <kk...@cloudera.com.invalid> wrote:
>
> > Hello all,
> >
> >
> > Here are the steps to start using the new sentry repository.
> >
> >
> > There are two ways to use the repo
> >
> > 1. Use Github to push. (*Current process followed*)
> >
> > 2. Use gitbox to push.
> >
> >
> > If you want to use gitbox to push there are no special steps needed but
> if
> > you want to use GitHub(*current process*), please follow below steps for
> > GitHub write access.
> >
> >
> > *For existing commitors*
> >
> >
> > 1. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
> > your GitHub account with your ASF account and setup 2fa.
> > 1. Follow below link to setup 2fa
> > 2.
> >
> > https://help.github.com/articles/configuring-two-factor-authentication/
> > 3. You can use any mobile for token generation. I have used
> "*Authy*"
> > 2. Wait about an hours time for things to sync up
> > 3. Great, you now have r/w access to both gitbox.apache.org <
> > http://gitbox.apache.org> and GitHub!
> > 1. Follow below steps to push code to GitHub
> > 1.
> >
> >
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> > 2. This is a one-time process. Once it is done you can reuse
> > the access token.
> >
> >
> > *For new contributors*
> >
> >
> > 1. Add yourself to our GitHub organization (see above) and make sure
> you
> > are already a committer for the project.
> > 2. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
> > your GitHub account with your ASF account and setup 2fa.
> > 1. Follow below link to setup 2fa
> > 2.
> >
> > https://help.github.com/articles/configuring-two-factor-authentication/
> > 3. You can use any mobile for token generation. I have used
> "*Authy*"
> > 3. Wait about an hours time for things to sync up
> > 4. Great, you now have r/w access to both gitbox.apache.org <
> > http://gitbox.apache.org> and GitHub!
> > 1. Follow below steps to push code to GitHub
> > 1.
> >
> >
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> > 2. This is a one-time process. Once it is done you can reuse
> > the access token.
> >
> > -Kalyan
> >
>
--
Colm O hEigeartaigh
Talend Community Coder
http://coders.talend.com
Re: Sentry repository is now relocated
Posted by Na Li <li...@cloudera.com.INVALID>.
Kakyan,
Thanks for getting this done!
Lina
On Fri, Jan 18, 2019 at 2:42 PM Kalyan Kumar Kalvagadda
<kk...@cloudera.com.invalid> wrote:
> Hello all,
>
>
> Here are the steps to start using the new sentry repository.
>
>
> There are two ways to use the repo
>
> 1. Use Github to push. (*Current process followed*)
>
> 2. Use gitbox to push.
>
>
> If you want to use gitbox to push there are no special steps needed but if
> you want to use GitHub(*current process*), please follow below steps for
> GitHub write access.
>
>
> *For existing commitors*
>
>
> 1. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
> your GitHub account with your ASF account and setup 2fa.
> 1. Follow below link to setup 2fa
> 2.
>
> https://help.github.com/articles/configuring-two-factor-authentication/
> 3. You can use any mobile for token generation. I have used "*Authy*"
> 2. Wait about an hours time for things to sync up
> 3. Great, you now have r/w access to both gitbox.apache.org <
> http://gitbox.apache.org> and GitHub!
> 1. Follow below steps to push code to GitHub
> 1.
>
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> 2. This is a one-time process. Once it is done you can reuse
> the access token.
>
>
> *For new contributors*
>
>
> 1. Add yourself to our GitHub organization (see above) and make sure you
> are already a committer for the project.
> 2. Visit the Gitbox Site <https://gitbox.apache.org/setup/> and link
> your GitHub account with your ASF account and setup 2fa.
> 1. Follow below link to setup 2fa
> 2.
>
> https://help.github.com/articles/configuring-two-factor-authentication/
> 3. You can use any mobile for token generation. I have used "*Authy*"
> 3. Wait about an hours time for things to sync up
> 4. Great, you now have r/w access to both gitbox.apache.org <
> http://gitbox.apache.org> and GitHub!
> 1. Follow below steps to push code to GitHub
> 1.
>
> https://help.github.com/articles/accessing-github-using-two-factor-authentication/#using-two-factor-authentication-with-the-command-line
> 2. This is a one-time process. Once it is done you can reuse
> the access token.
>
> -Kalyan
>