You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@continuum.apache.org by KURT TOMETICH <bo...@msn.com> on 2008/02/19 18:10:06 UTC
Windows path length limitation
Is there a way to configure Continuum to checkout project from Subversion using an absolute path instead of a relative path? This would solve the path limitation issue on Windows. I ran into the problem where the path was too long and was able to verify that if I checked out the project using an absolute path it worked fine. Is this something I can configure on and end user system or does the project have to be recompiled to make this change?
Kurt
Re: Windows path length limitation
Posted by Emmanuel Venisse <em...@gmail.com>.
bad windows.
I'll look at this issue before to release a new version of maven-scm
On Thu, Feb 21, 2008 at 7:01 PM, KURT TOMETICH <bo...@msn.com> wrote:
>
> I went ahead and logged an improvement to Maven SCM (
> http://jira.codehaus.org/browse/SCM-368). Hopefully they will fix this so
> Windows users won't have to experience this shortcoming.
>
> Kurt
>
>
>
> > Date: Thu, 21 Feb 2008 11:22:36 -0600
> > From: jesse.mcconnell@gmail.com
> > To: continuum-users@maven.apache.org
> > Subject: Re: Windows path length limitation
> >
> > oh interesting...You should check and see if there is an issue on this
> under
> > maven SCM and if not open an issue there with this information
> >
> > http://jira.codehaus.org/browse/SCM
> >
> > jesse
> >
> > On Thu, Feb 21, 2008 at 11:15 AM, KURT TOMETICH <bo...@msn.com>
> wrote:
> >
> > >
> > > I agree its a limitation of the file system; however, if Continuum
> would
> > > feed Subversion an absolute path (when running svn commands) as
> opposed to a
> > > relative path then their would not be a 256 character limit. I tried
> this
> > > and it does work when I send Subversion an absolute path and it fails
> when I
> > > send it a relative path. I found an article about it online here:
> > > http://svn.haxx.se/users/archive-2005-02/1088.shtml. This shouldn't
> be a
> > > hard change to make and would allow Windows users to not have to worry
> about
> > > running into this problem.
> > >
> > > Kurt
> > >
> > >
> > > > Date: Thu, 21 Feb 2008 10:48:08 -0600
> > > > From: jesse.mcconnell@gmail.com
> > > > To: continuum-users@maven.apache.org
> > > > Subject: Re: Windows path length limitation
> > > >
> > > > its a limitation of the file system...not a lot we can do about it
> :(
> > > >
> > > > On Tue, Feb 19, 2008 at 12:33 PM, KURT TOMETICH <bo...@msn.com>
> > > wrote:
> > > >
> > > > >
> > > > > Thanks for the quick response. That was my fall-back option, but
> I
> > > wasn't
> > > > > sure if there was just an easy way to configure it to use an
> absolute
> > > path.
> > > > > Shortening the root path length should help, but its still
> possible
> > > to
> > > > > reach the limit.
> > > > >
> > > > > Kurt
> > > > >
> > > > >
> > > > >
> > > > > > Date: Tue, 19 Feb 2008 18:19:23 +0100
> > > > > > From: olamy@apache.org
> > > > > > To: continuum-users@maven.apache.org
> > > > > > Subject: Re: Windows path length limitation
> > > > > >
> > > > > > Try to configure Build Output Directory and Working Directory to
> > > > > > c:\\bd and c:\\wd
> > > > > > Go to the configuration entry of the administration menu [1]
> > > > > > --
> > > > > > Olivier
> > > > > >
> > > > > > [1]
> > > > >
> > >
> http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
> > > > > >
> > > > > > 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> > > > > > >
> > > > > > > Is there a way to configure Continuum to checkout project from
> > > > > Subversion using an absolute path instead of a relative path?
> This
> > > would
> > > > > solve the path limitation issue on Windows. I ran into the
> problem
> > > where
> > > > > the path was too long and was able to verify that if I checked out
> the
> > > > > project using an absolute path it worked fine. Is this something
> I
> > > can
> > > > > configure on and end user system or does the project have to be
> > > recompiled
> > > > > to make this change?
> > > > > > >
> > > > > > > Kurt
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > jesse mcconnell
> > > > jesse.mcconnell@gmail.com
> > >
> >
> >
> >
> > --
> > jesse mcconnell
> > jesse.mcconnell@gmail.com
>
RE: Windows path length limitation
Posted by KURT TOMETICH <bo...@msn.com>.
I went ahead and logged an improvement to Maven SCM (http://jira.codehaus.org/browse/SCM-368). Hopefully they will fix this so Windows users won't have to experience this shortcoming.
Kurt
> Date: Thu, 21 Feb 2008 11:22:36 -0600
> From: jesse.mcconnell@gmail.com
> To: continuum-users@maven.apache.org
> Subject: Re: Windows path length limitation
>
> oh interesting...You should check and see if there is an issue on this under
> maven SCM and if not open an issue there with this information
>
> http://jira.codehaus.org/browse/SCM
>
> jesse
>
> On Thu, Feb 21, 2008 at 11:15 AM, KURT TOMETICH <bo...@msn.com> wrote:
>
> >
> > I agree its a limitation of the file system; however, if Continuum would
> > feed Subversion an absolute path (when running svn commands) as opposed to a
> > relative path then their would not be a 256 character limit. I tried this
> > and it does work when I send Subversion an absolute path and it fails when I
> > send it a relative path. I found an article about it online here:
> > http://svn.haxx.se/users/archive-2005-02/1088.shtml. This shouldn't be a
> > hard change to make and would allow Windows users to not have to worry about
> > running into this problem.
> >
> > Kurt
> >
> >
> > > Date: Thu, 21 Feb 2008 10:48:08 -0600
> > > From: jesse.mcconnell@gmail.com
> > > To: continuum-users@maven.apache.org
> > > Subject: Re: Windows path length limitation
> > >
> > > its a limitation of the file system...not a lot we can do about it :(
> > >
> > > On Tue, Feb 19, 2008 at 12:33 PM, KURT TOMETICH <bo...@msn.com>
> > wrote:
> > >
> > > >
> > > > Thanks for the quick response. That was my fall-back option, but I
> > wasn't
> > > > sure if there was just an easy way to configure it to use an absolute
> > path.
> > > > Shortening the root path length should help, but its still possible
> > to
> > > > reach the limit.
> > > >
> > > > Kurt
> > > >
> > > >
> > > >
> > > > > Date: Tue, 19 Feb 2008 18:19:23 +0100
> > > > > From: olamy@apache.org
> > > > > To: continuum-users@maven.apache.org
> > > > > Subject: Re: Windows path length limitation
> > > > >
> > > > > Try to configure Build Output Directory and Working Directory to
> > > > > c:\\bd and c:\\wd
> > > > > Go to the configuration entry of the administration menu [1]
> > > > > --
> > > > > Olivier
> > > > >
> > > > > [1]
> > > >
> > http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
> > > > >
> > > > > 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> > > > > >
> > > > > > Is there a way to configure Continuum to checkout project from
> > > > Subversion using an absolute path instead of a relative path? This
> > would
> > > > solve the path limitation issue on Windows. I ran into the problem
> > where
> > > > the path was too long and was able to verify that if I checked out the
> > > > project using an absolute path it worked fine. Is this something I
> > can
> > > > configure on and end user system or does the project have to be
> > recompiled
> > > > to make this change?
> > > > > >
> > > > > > Kurt
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > jesse mcconnell
> > > jesse.mcconnell@gmail.com
> >
>
>
>
> --
> jesse mcconnell
> jesse.mcconnell@gmail.com
Re: Windows path length limitation
Posted by Jesse McConnell <je...@gmail.com>.
oh interesting...You should check and see if there is an issue on this under
maven SCM and if not open an issue there with this information
http://jira.codehaus.org/browse/SCM
jesse
On Thu, Feb 21, 2008 at 11:15 AM, KURT TOMETICH <bo...@msn.com> wrote:
>
> I agree its a limitation of the file system; however, if Continuum would
> feed Subversion an absolute path (when running svn commands) as opposed to a
> relative path then their would not be a 256 character limit. I tried this
> and it does work when I send Subversion an absolute path and it fails when I
> send it a relative path. I found an article about it online here:
> http://svn.haxx.se/users/archive-2005-02/1088.shtml. This shouldn't be a
> hard change to make and would allow Windows users to not have to worry about
> running into this problem.
>
> Kurt
>
>
> > Date: Thu, 21 Feb 2008 10:48:08 -0600
> > From: jesse.mcconnell@gmail.com
> > To: continuum-users@maven.apache.org
> > Subject: Re: Windows path length limitation
> >
> > its a limitation of the file system...not a lot we can do about it :(
> >
> > On Tue, Feb 19, 2008 at 12:33 PM, KURT TOMETICH <bo...@msn.com>
> wrote:
> >
> > >
> > > Thanks for the quick response. That was my fall-back option, but I
> wasn't
> > > sure if there was just an easy way to configure it to use an absolute
> path.
> > > Shortening the root path length should help, but its still possible
> to
> > > reach the limit.
> > >
> > > Kurt
> > >
> > >
> > >
> > > > Date: Tue, 19 Feb 2008 18:19:23 +0100
> > > > From: olamy@apache.org
> > > > To: continuum-users@maven.apache.org
> > > > Subject: Re: Windows path length limitation
> > > >
> > > > Try to configure Build Output Directory and Working Directory to
> > > > c:\\bd and c:\\wd
> > > > Go to the configuration entry of the administration menu [1]
> > > > --
> > > > Olivier
> > > >
> > > > [1]
> > >
> http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
> > > >
> > > > 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> > > > >
> > > > > Is there a way to configure Continuum to checkout project from
> > > Subversion using an absolute path instead of a relative path? This
> would
> > > solve the path limitation issue on Windows. I ran into the problem
> where
> > > the path was too long and was able to verify that if I checked out the
> > > project using an absolute path it worked fine. Is this something I
> can
> > > configure on and end user system or does the project have to be
> recompiled
> > > to make this change?
> > > > >
> > > > > Kurt
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> >
> >
> >
> > --
> > jesse mcconnell
> > jesse.mcconnell@gmail.com
>
--
jesse mcconnell
jesse.mcconnell@gmail.com
RE: Windows path length limitation
Posted by KURT TOMETICH <bo...@msn.com>.
I agree its a limitation of the file system; however, if Continuum would feed Subversion an absolute path (when running svn commands) as opposed to a relative path then their would not be a 256 character limit. I tried this and it does work when I send Subversion an absolute path and it fails when I send it a relative path. I found an article about it online here: http://svn.haxx.se/users/archive-2005-02/1088.shtml. This shouldn't be a hard change to make and would allow Windows users to not have to worry about running into this problem.
Kurt
> Date: Thu, 21 Feb 2008 10:48:08 -0600
> From: jesse.mcconnell@gmail.com
> To: continuum-users@maven.apache.org
> Subject: Re: Windows path length limitation
>
> its a limitation of the file system...not a lot we can do about it :(
>
> On Tue, Feb 19, 2008 at 12:33 PM, KURT TOMETICH <bo...@msn.com> wrote:
>
> >
> > Thanks for the quick response. That was my fall-back option, but I wasn't
> > sure if there was just an easy way to configure it to use an absolute path.
> > Shortening the root path length should help, but its still possible to
> > reach the limit.
> >
> > Kurt
> >
> >
> >
> > > Date: Tue, 19 Feb 2008 18:19:23 +0100
> > > From: olamy@apache.org
> > > To: continuum-users@maven.apache.org
> > > Subject: Re: Windows path length limitation
> > >
> > > Try to configure Build Output Directory and Working Directory to
> > > c:\\bd and c:\\wd
> > > Go to the configuration entry of the administration menu [1]
> > > --
> > > Olivier
> > >
> > > [1]
> > http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
> > >
> > > 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> > > >
> > > > Is there a way to configure Continuum to checkout project from
> > Subversion using an absolute path instead of a relative path? This would
> > solve the path limitation issue on Windows. I ran into the problem where
> > the path was too long and was able to verify that if I checked out the
> > project using an absolute path it worked fine. Is this something I can
> > configure on and end user system or does the project have to be recompiled
> > to make this change?
> > > >
> > > > Kurt
> > > >
> > > >
> > > >
> > > >
> >
>
>
>
> --
> jesse mcconnell
> jesse.mcconnell@gmail.com
Re: Windows path length limitation
Posted by Jesse McConnell <je...@gmail.com>.
its a limitation of the file system...not a lot we can do about it :(
On Tue, Feb 19, 2008 at 12:33 PM, KURT TOMETICH <bo...@msn.com> wrote:
>
> Thanks for the quick response. That was my fall-back option, but I wasn't
> sure if there was just an easy way to configure it to use an absolute path.
> Shortening the root path length should help, but its still possible to
> reach the limit.
>
> Kurt
>
>
>
> > Date: Tue, 19 Feb 2008 18:19:23 +0100
> > From: olamy@apache.org
> > To: continuum-users@maven.apache.org
> > Subject: Re: Windows path length limitation
> >
> > Try to configure Build Output Directory and Working Directory to
> > c:\\bd and c:\\wd
> > Go to the configuration entry of the administration menu [1]
> > --
> > Olivier
> >
> > [1]
> http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
> >
> > 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> > >
> > > Is there a way to configure Continuum to checkout project from
> Subversion using an absolute path instead of a relative path? This would
> solve the path limitation issue on Windows. I ran into the problem where
> the path was too long and was able to verify that if I checked out the
> project using an absolute path it worked fine. Is this something I can
> configure on and end user system or does the project have to be recompiled
> to make this change?
> > >
> > > Kurt
> > >
> > >
> > >
> > >
>
--
jesse mcconnell
jesse.mcconnell@gmail.com
RE: Windows path length limitation
Posted by KURT TOMETICH <bo...@msn.com>.
Thanks for the quick response. That was my fall-back option, but I wasn't sure if there was just an easy way to configure it to use an absolute path. Shortening the root path length should help, but its still possible to reach the limit.
Kurt
> Date: Tue, 19 Feb 2008 18:19:23 +0100
> From: olamy@apache.org
> To: continuum-users@maven.apache.org
> Subject: Re: Windows path length limitation
>
> Try to configure Build Output Directory and Working Directory to
> c:\\bd and c:\\wd
> Go to the configuration entry of the administration menu [1]
> --
> Olivier
>
> [1] http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
>
> 2008/2/19, KURT TOMETICH <bo...@msn.com>:
> >
> > Is there a way to configure Continuum to checkout project from Subversion using an absolute path instead of a relative path? This would solve the path limitation issue on Windows. I ran into the problem where the path was too long and was able to verify that if I checked out the project using an absolute path it worked fine. Is this something I can configure on and end user system or does the project have to be recompiled to make this change?
> >
> > Kurt
> >
> >
> >
> >
Re: Windows path length limitation
Posted by Olivier Lamy <ol...@apache.org>.
Try to configure Build Output Directory and Working Directory to
c:\\bd and c:\\wd
Go to the configuration entry of the administration menu [1]
--
Olivier
[1] http://maven.apache.org/continuum/docs/1.1/administrator_guides/configuration.html
2008/2/19, KURT TOMETICH <bo...@msn.com>:
>
> Is there a way to configure Continuum to checkout project from Subversion using an absolute path instead of a relative path? This would solve the path limitation issue on Windows. I ran into the problem where the path was too long and was able to verify that if I checked out the project using an absolute path it worked fine. Is this something I can configure on and end user system or does the project have to be recompiled to make this change?
>
> Kurt
>
>
>
>