You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@activemq.apache.org by Yari Marchetti <ya...@staff.dada.net> on 2008/07/22 10:53:05 UTC
Re: [SPAM] - Re: Producer and write permission - Found word(s) UCE
in the subject
thanks, that made it.
I checked the Net::Stomp library for Perl but i didn't find a way to set
the producer
to use sync sends, only to set sync consumer.
do you know if it is possible to achieve the same result with a Stomp
client?
Joe Fernandez ha scritto:
> Try setting the connection factory to use sync sends.
>
> connectionFactory.setAlwaysSyncSend(true);
>
> Joe
> www.ttmsolutions.com
>
>
> Yari Marchetti-2 wrote:
>
>> Hi,
>> i have a configuration with JAAS enabled on a per queue basis.
>> I created a user named 'Test' and didn't give it write permission on a
>> static queue named 'test.queue'.
>>
>> Using the example producer (the one in the activemq package), modified
>> just to provide it with Test user and password, using openwire as
>> transport
>> i tried to send 10 messages to the test.queue.
>>
>> I was expecting to received an exception just after the first message, and
>> surprising, the whole 10 message pack was sent with any problem.
>>
>> So i checked the broker logs, and found:
>>
>> java.lang.SecurityException: User Test is not authorized to write to:
>> queue://test.queue
>> at
>> org.apache.activemq.security.AuthorizationBroker.send(AuthorizationBroker.java:173)
>> at
>> org.apache.activemq.broker.MutableBrokerFilter.send(MutableBrokerFilter.java:132)
>> at
>> org.apache.activemq.broker.TransportConnection.processMessage(TransportConnection.java:437)
>> at
>> org.apache.activemq.command.ActiveMQMessage.visit(ActiveMQMessage.java:624)
>> at
>> org.apache.activemq.broker.TransportConnection.service(TransportConnection.java:292)
>> at
>> org.apache.activemq.broker.TransportConnection$1.onCommand(TransportConnection.java:180)
>> at
>> org.apache.activemq.transport.TransportFilter.onCommand(TransportFilter.java:68)
>> at
>> org.apache.activemq.transport.WireFormatNegotiator.onCommand(WireFormatNegotiator.java:143)
>> at
>> org.apache.activemq.transport.InactivityMonitor.onCommand(InactivityMonitor.java:206)
>> at
>> org.apache.activemq.transport.TransportSupport.doConsume(TransportSupport.java:84)
>> at
>> org.apache.activemq.transport.tcp.TcpTransport.doRun(TcpTransport.java:196)
>> at
>> org.apache.activemq.transport.tcp.TcpTransport.run(TcpTransport.java:183)
>> at java.lang.Thread.run(Thread.java:619)
>>
>> obviously no message was found in test.queue queue. To be sure i tried
>> also with a Stomp client,
>> just to see if it was possible to receive a notification of error after
>> a failed write attempt, and it
>> was the same as with openwire.
>>
>> I tried also with a consumer and it receives an error when it tries to
>> read from a queue it has no
>> privileges on:
>>
>> java.lang.SecurityException: User Test2 is not authorized to read from:
>> queue://test.queue
>>
>> so my question is: is this behavior the correct one? wouldn't be better
>> to send a notification of error
>> after a failed write on a queue ?
>>
>>
>>
>
>
Re: [SPAM] - Re: [SPAM] - Re: Producer and write permission - Found
word(s) UCE in the subject - Found word(s) UCE in the subject
Posted by Yari Marchetti <ya...@staff.dada.net>.
Thx, i'll check it out
Dejan Bosanac ha scritto:
> Hi,
>
> it's possible. Take a look at the receipt header in the Stomp protocol which
> is used for this purpose
>
> http://stomp.codehaus.org/Protocol#Protocol-Receipt
>
> But, it's up to the client whether it will be supported. PHP client supports
> it like this
>
> http://stomp.codehaus.org/PHP+Synchronous+vs.+Asynchronous+operations
>
> Cheers
>
Re: [SPAM] - Re: Producer and write permission - Found word(s) UCE in the subject
Posted by Dejan Bosanac <de...@nighttale.net>.
Hi,
it's possible. Take a look at the receipt header in the Stomp protocol which
is used for this purpose
http://stomp.codehaus.org/Protocol#Protocol-Receipt
But, it's up to the client whether it will be supported. PHP client supports
it like this
http://stomp.codehaus.org/PHP+Synchronous+vs.+Asynchronous+operations
Cheers
--
Dejan Bosanac
www.scriptinginjava.net
On Tue, Jul 22, 2008 at 10:53 AM, Yari Marchetti <
yari.marchetti@staff.dada.net> wrote:
> thanks, that made it.
> I checked the Net::Stomp library for Perl but i didn't find a way to set
> the producer
> to use sync sends, only to set sync consumer.
> do you know if it is possible to achieve the same result with a Stomp
> client?
>
>
> Joe Fernandez ha scritto:
>
>> Try setting the connection factory to use sync sends.
>> connectionFactory.setAlwaysSyncSend(true);
>>
>> Joe
>> www.ttmsolutions.com
>>
>>
>> Yari Marchetti-2 wrote:
>>
>>
>>> Hi,
>>> i have a configuration with JAAS enabled on a per queue basis.
>>> I created a user named 'Test' and didn't give it write permission on a
>>> static queue named 'test.queue'.
>>>
>>> Using the example producer (the one in the activemq package), modified
>>> just to provide it with Test user and password, using openwire as
>>> transport
>>> i tried to send 10 messages to the test.queue.
>>>
>>> I was expecting to received an exception just after the first message,
>>> and
>>> surprising, the whole 10 message pack was sent with any problem.
>>>
>>> So i checked the broker logs, and found:
>>>
>>> java.lang.SecurityException: User Test is not authorized to write to:
>>> queue://test.queue
>>> at
>>> org.apache.activemq.security.AuthorizationBroker.send(AuthorizationBroker.java:173)
>>> at
>>> org.apache.activemq.broker.MutableBrokerFilter.send(MutableBrokerFilter.java:132)
>>> at
>>> org.apache.activemq.broker.TransportConnection.processMessage(TransportConnection.java:437)
>>> at
>>> org.apache.activemq.command.ActiveMQMessage.visit(ActiveMQMessage.java:624)
>>> at
>>> org.apache.activemq.broker.TransportConnection.service(TransportConnection.java:292)
>>> at
>>> org.apache.activemq.broker.TransportConnection$1.onCommand(TransportConnection.java:180)
>>> at
>>> org.apache.activemq.transport.TransportFilter.onCommand(TransportFilter.java:68)
>>> at
>>> org.apache.activemq.transport.WireFormatNegotiator.onCommand(WireFormatNegotiator.java:143)
>>> at
>>> org.apache.activemq.transport.InactivityMonitor.onCommand(InactivityMonitor.java:206)
>>> at
>>> org.apache.activemq.transport.TransportSupport.doConsume(TransportSupport.java:84)
>>> at
>>> org.apache.activemq.transport.tcp.TcpTransport.doRun(TcpTransport.java:196)
>>> at
>>> org.apache.activemq.transport.tcp.TcpTransport.run(TcpTransport.java:183)
>>> at java.lang.Thread.run(Thread.java:619)
>>>
>>> obviously no message was found in test.queue queue. To be sure i tried
>>> also with a Stomp client,
>>> just to see if it was possible to receive a notification of error after a
>>> failed write attempt, and it
>>> was the same as with openwire.
>>>
>>> I tried also with a consumer and it receives an error when it tries to
>>> read from a queue it has no
>>> privileges on:
>>>
>>> java.lang.SecurityException: User Test2 is not authorized to read from:
>>> queue://test.queue
>>>
>>> so my question is: is this behavior the correct one? wouldn't be better
>>> to send a notification of error
>>> after a failed write on a queue ?
>>>
>>>
>>>
>>>
>>
>>
>>
>
>