You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@hbase.apache.org by mail list <lo...@gmail.com> on 2014/11/20 05:37:31 UTC
YCSB load data quit because hbase region too busy
hi all,
I build an HBASE test environment, with three PC server, with CHD 5.1.0
pc1 pc2 pc3
pc1 and pc2 as HMASTER and hadoop namenode
pc3 as RegionServer and datanode
Then I create user as following:
create 'usertable', 'family', {SPLITS => (1..100).map {|i| "user#{1000+i*(9999-1000)/100}"} }
Using YCSB for load data as following:
./bin/ycsb load hbase -P workloads/workloadc -p columnfamily=family -p recordcount=1000000000 -p threadcount=32 -s > result/workloadc
But when after a while, the ycsb return with following error:
14/11/20 12:23:44 INFO client.AsyncProcess: #15, table=usertable, attempt=35/35 failed 715 ops, last exception: org.apache.hadoop.hbase.RegionTooBusyException: org.apache.hadoop.hbase.RegionTooBusyException: Above memstore limit, regionName=usertable,user9099,1416453519676.2552d36eb407a8af12d2b58c973d68a9., server=l-hbase10.dba.cn1.qunar.com,60020,1416451280772, memstoreSize=536897120, blockingMemStoreSize=536870912
at org.apache.hadoop.hbase.regionserver.HRegion.checkResources(HRegion.java:2822)
at org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2234)
at org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2201)
at org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2205)
at org.apache.hadoop.hbase.regionserver.HRegionServer.doBatchOp(HRegionServer.java:4253)
at org.apache.hadoop.hbase.regionserver.HRegionServer.doNonAtomicRegionMutation(HRegionServer.java:3469)
at org.apache.hadoop.hbase.regionserver.HRegionServer.multi(HRegionServer.java:3359)
at org.apache.hadoop.hbase.protobuf.generated.ClientProtos$ClientService$2.callBlockingMethod(ClientProtos.java:29503)
at org.apache.hadoop.hbase.ipc.RpcServer.call(RpcServer.java:2012)
at org.apache.hadoop.hbase.ipc.CallRunner.run(CallRunner.java:98)
at org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.consumerLoop(SimpleRpcScheduler.java:160)
at org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.access$000(SimpleRpcScheduler.java:38)
at org.apache.hadoop.hbase.ipc.SimpleRpcScheduler$1.run(SimpleRpcScheduler.java:110)
at java.lang.Thread.run(Thread.java:744)
on l-hbase10.dba.cn1.qunar.com,60020,1416451280772, tracking started Thu Nov 20 12:15:07 CST 2014, retrying after 20051 ms, replay 715 ops.
It seems the user9099 region is too busy, so I lookup the memstore metrics in web:
As you see, the user9099 is bigger than other region, I think it is flushing, but after a while, it does not change to a small size and YCSB quit finally.
The region server is configured as below:
Summary: HP DL380p Gen8, 1 x Xeon E5-2630 v2 2.60GHz, 126GB / 128GB 1600MHz DDR3
System: HP ProLiant DL380p Gen8
Processors: 1 (of 2) x Xeon E5-2630 v2 2.60GHz 100MHz FSB (HT enabled, 6 cores, 24 threads)
Memory: 126GB / 128GB 1600MHz DDR3 == 16 x 8GB, 8 x empty
Disk: sda (scsi2): 450GB (1%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk: sdb (scsi2): 27TB (0%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk-Control: ata_piix0: Intel C600/X79 series chipset 4-Port SATA IDE Controller
Disk-Control: hpsa0: Hewlett-Packard Company Smart Array Gen8 Controllers
Disk-Control: shannon0: Device 1cb0:0275
Network: eth0 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe, 40:a8:f0:23:55:fc, 1000Mb/s <full-duplex>
Network: eth1 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe, 40:a8:f0:23:55:fd, no carrier
Network: eth2 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe, 40:a8:f0:23:55:fe, no carrier
Network: eth3 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe, 40:a8:f0:23:55:ff, no carrier
OS: CentOS 6.4 (Final), Linux 2.6.32-358.23.2.el6.x86_64 x86_64, 64-bit
BIOS: HP P70 02/10/2014
Hostname: l-hbase10.dba.cn1.qunar.com
And i attach the hbase configuration file.
I am new to HBase, any idea will be appreciated!
Fwd: YCSB load data quit because hbase region too busy
Posted by 娄帅 <lo...@gmail.com>.
---------- Forwarded message ----------
From: mail list <lo...@gmail.com>
Date: 2014-11-20 12:37 GMT+08:00
Subject: YCSB load data quit because hbase region too busy
To: dev@hbase.apache.org
hi all,
I build an HBASE test environment, with three PC server, with CHD 5.1.0
pc1 pc2 pc3
pc1 and pc2 as HMASTER and hadoop namenode
pc3 as RegionServer and datanode
Then I create user as following:
create 'usertable', 'family', {SPLITS => (1..100).map {|i|
"user#{1000+i*(9999-1000)/100}"} }
Using YCSB for load data as following:
./bin/ycsb load hbase -P workloads/workloadc -p columnfamily=family -p
recordcount=1000000000 -p threadcount=32 -s > result/workloadc
But when after a while, the ycsb return with following error:
14/11/20 12:23:44 INFO client.AsyncProcess: #15, table=usertable,
attempt=35/35 failed 715 ops, last exception:
org.apache.hadoop.hbase.RegionTooBusyException:
org.apache.hadoop.hbase.RegionTooBusyException: Above memstore limit,
regionName=usertable,user9099,1416453519676.2552d36eb407a8af12d2b58c973d68a9.,
server=l-hbase10.dba.cn1.qunar.com,60020,1416451280772,
memstoreSize=536897120, blockingMemStoreSize=536870912
at
org.apache.hadoop.hbase.regionserver.HRegion.checkResources(HRegion.java:2822)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2234)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2201)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2205)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doBatchOp(HRegionServer.java:4253)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doNonAtomicRegionMutation(HRegionServer.java:3469)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.multi(HRegionServer.java:3359)
at
org.apache.hadoop.hbase.protobuf.generated.ClientProtos$ClientService$2.callBlockingMethod(ClientProtos.java:29503)
at org.apache.hadoop.hbase.ipc.RpcServer.call(RpcServer.java:2012)
at org.apache.hadoop.hbase.ipc.CallRunner.run(CallRunner.java:98)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.consumerLoop(SimpleRpcScheduler.java:160)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.access$000(SimpleRpcScheduler.java:38)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler$1.run(SimpleRpcScheduler.java:110)
at java.lang.Thread.run(Thread.java:744)
on l-hbase10.dba.cn1.qunar.com,60020,1416451280772, tracking started Thu
Nov 20 12:15:07 CST 2014, retrying after 20051 ms, replay 715 ops.
It seems the user9099 region is too busy, so I lookup the memstore metrics
in web:
As you see, the user9099 is bigger than other region, I think it is
flushing, but after a while, it does not change to a small size and YCSB
quit finally.
The region server is configured as below:
Summary: HP DL380p Gen8, 1 x Xeon E5-2630 v2 2.60GHz, 126GB / 128GB 1600MHz
DDR3
System: HP ProLiant DL380p Gen8
Processors: 1 (of 2) x Xeon E5-2630 v2 2.60GHz 100MHz FSB (HT enabled, 6
cores, 24 threads)
Memory: 126GB / 128GB 1600MHz DDR3 == 16 x 8GB, 8 x empty
Disk: sda (scsi2): 450GB (1%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk: sdb (scsi2): 27TB (0%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk-Control: ata_piix0: Intel C600/X79 series chipset 4-Port SATA IDE
Controller
Disk-Control: hpsa0: Hewlett-Packard Company Smart Array Gen8 Controllers
Disk-Control: shannon0: Device 1cb0:0275
Network: eth0 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fc, 1000Mb/s <full-duplex>
Network: eth1 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fd, no carrier
Network: eth2 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fe, no carrier
Network: eth3 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:ff, no carrier
OS: CentOS 6.4 (Final), Linux 2.6.32-358.23.2.el6.x86_64 x86_64, 64-bit
BIOS: HP P70 02/10/2014
Hostname: l-hbase10.dba.cn1.qunar.com
And i attach the hbase configuration file.
I am new to HBase, any idea will be appreciated!
Fwd: YCSB load data quit because hbase region too busy
Posted by 娄帅 <lo...@gmail.com>.
---------- Forwarded message ----------
From: mail list <lo...@gmail.com>
Date: 2014-11-20 12:37 GMT+08:00
Subject: YCSB load data quit because hbase region too busy
To: dev@hbase.apache.org
hi all,
I build an HBASE test environment, with three PC server, with CHD 5.1.0
pc1 pc2 pc3
pc1 and pc2 as HMASTER and hadoop namenode
pc3 as RegionServer and datanode
Then I create user as following:
create 'usertable', 'family', {SPLITS => (1..100).map {|i|
"user#{1000+i*(9999-1000)/100}"} }
Using YCSB for load data as following:
./bin/ycsb load hbase -P workloads/workloadc -p columnfamily=family -p
recordcount=1000000000 -p threadcount=32 -s > result/workloadc
But when after a while, the ycsb return with following error:
14/11/20 12:23:44 INFO client.AsyncProcess: #15, table=usertable,
attempt=35/35 failed 715 ops, last exception:
org.apache.hadoop.hbase.RegionTooBusyException:
org.apache.hadoop.hbase.RegionTooBusyException: Above memstore limit,
regionName=usertable,user9099,1416453519676.2552d36eb407a8af12d2b58c973d68a9.,
server=l-hbase10.dba.cn1.qunar.com,60020,1416451280772,
memstoreSize=536897120, blockingMemStoreSize=536870912
at
org.apache.hadoop.hbase.regionserver.HRegion.checkResources(HRegion.java:2822)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2234)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2201)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2205)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doBatchOp(HRegionServer.java:4253)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doNonAtomicRegionMutation(HRegionServer.java:3469)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.multi(HRegionServer.java:3359)
at
org.apache.hadoop.hbase.protobuf.generated.ClientProtos$ClientService$2.callBlockingMethod(ClientProtos.java:29503)
at org.apache.hadoop.hbase.ipc.RpcServer.call(RpcServer.java:2012)
at org.apache.hadoop.hbase.ipc.CallRunner.run(CallRunner.java:98)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.consumerLoop(SimpleRpcScheduler.java:160)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.access$000(SimpleRpcScheduler.java:38)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler$1.run(SimpleRpcScheduler.java:110)
at java.lang.Thread.run(Thread.java:744)
on l-hbase10.dba.cn1.qunar.com,60020,1416451280772, tracking started Thu
Nov 20 12:15:07 CST 2014, retrying after 20051 ms, replay 715 ops.
It seems the user9099 region is too busy, so I lookup the memstore metrics
in web:
As you see, the user9099 is bigger than other region, I think it is
flushing, but after a while, it does not change to a small size and YCSB
quit finally.
The region server is configured as below:
Summary: HP DL380p Gen8, 1 x Xeon E5-2630 v2 2.60GHz, 126GB / 128GB 1600MHz
DDR3
System: HP ProLiant DL380p Gen8
Processors: 1 (of 2) x Xeon E5-2630 v2 2.60GHz 100MHz FSB (HT enabled, 6
cores, 24 threads)
Memory: 126GB / 128GB 1600MHz DDR3 == 16 x 8GB, 8 x empty
Disk: sda (scsi2): 450GB (1%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk: sdb (scsi2): 27TB (0%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk-Control: ata_piix0: Intel C600/X79 series chipset 4-Port SATA IDE
Controller
Disk-Control: hpsa0: Hewlett-Packard Company Smart Array Gen8 Controllers
Disk-Control: shannon0: Device 1cb0:0275
Network: eth0 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fc, 1000Mb/s <full-duplex>
Network: eth1 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fd, no carrier
Network: eth2 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fe, no carrier
Network: eth3 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:ff, no carrier
OS: CentOS 6.4 (Final), Linux 2.6.32-358.23.2.el6.x86_64 x86_64, 64-bit
BIOS: HP P70 02/10/2014
Hostname: l-hbase10.dba.cn1.qunar.com
And i attach the hbase configuration file.
I am new to HBase, any idea will be appreciated!
Fwd: YCSB load data quit because hbase region too busy
Posted by 娄帅 <lo...@gmail.com>.
---------- Forwarded message ----------
From: mail list <lo...@gmail.com>
Date: 2014-11-20 12:37 GMT+08:00
Subject: YCSB load data quit because hbase region too busy
To: dev@hbase.apache.org
hi all,
I build an HBASE test environment, with three PC server, with CHD 5.1.0
pc1 pc2 pc3
pc1 and pc2 as HMASTER and hadoop namenode
pc3 as RegionServer and datanode
Then I create user as following:
create 'usertable', 'family', {SPLITS => (1..100).map {|i|
"user#{1000+i*(9999-1000)/100}"} }
Using YCSB for load data as following:
./bin/ycsb load hbase -P workloads/workloadc -p columnfamily=family -p
recordcount=1000000000 -p threadcount=32 -s > result/workloadc
But when after a while, the ycsb return with following error:
14/11/20 12:23:44 INFO client.AsyncProcess: #15, table=usertable,
attempt=35/35 failed 715 ops, last exception:
org.apache.hadoop.hbase.RegionTooBusyException:
org.apache.hadoop.hbase.RegionTooBusyException: Above memstore limit,
regionName=usertable,user9099,1416453519676.2552d36eb407a8af12d2b58c973d68a9.,
server=l-hbase10.dba.cn1.qunar.com,60020,1416451280772,
memstoreSize=536897120, blockingMemStoreSize=536870912
at
org.apache.hadoop.hbase.regionserver.HRegion.checkResources(HRegion.java:2822)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2234)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2201)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2205)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doBatchOp(HRegionServer.java:4253)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doNonAtomicRegionMutation(HRegionServer.java:3469)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.multi(HRegionServer.java:3359)
at
org.apache.hadoop.hbase.protobuf.generated.ClientProtos$ClientService$2.callBlockingMethod(ClientProtos.java:29503)
at org.apache.hadoop.hbase.ipc.RpcServer.call(RpcServer.java:2012)
at org.apache.hadoop.hbase.ipc.CallRunner.run(CallRunner.java:98)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.consumerLoop(SimpleRpcScheduler.java:160)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.access$000(SimpleRpcScheduler.java:38)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler$1.run(SimpleRpcScheduler.java:110)
at java.lang.Thread.run(Thread.java:744)
on l-hbase10.dba.cn1.qunar.com,60020,1416451280772, tracking started Thu
Nov 20 12:15:07 CST 2014, retrying after 20051 ms, replay 715 ops.
It seems the user9099 region is too busy, so I lookup the memstore metrics
in web:
As you see, the user9099 is bigger than other region, I think it is
flushing, but after a while, it does not change to a small size and YCSB
quit finally.
The region server is configured as below:
Summary: HP DL380p Gen8, 1 x Xeon E5-2630 v2 2.60GHz, 126GB / 128GB 1600MHz
DDR3
System: HP ProLiant DL380p Gen8
Processors: 1 (of 2) x Xeon E5-2630 v2 2.60GHz 100MHz FSB (HT enabled, 6
cores, 24 threads)
Memory: 126GB / 128GB 1600MHz DDR3 == 16 x 8GB, 8 x empty
Disk: sda (scsi2): 450GB (1%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk: sdb (scsi2): 27TB (0%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk-Control: ata_piix0: Intel C600/X79 series chipset 4-Port SATA IDE
Controller
Disk-Control: hpsa0: Hewlett-Packard Company Smart Array Gen8 Controllers
Disk-Control: shannon0: Device 1cb0:0275
Network: eth0 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fc, 1000Mb/s <full-duplex>
Network: eth1 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fd, no carrier
Network: eth2 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fe, no carrier
Network: eth3 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:ff, no carrier
OS: CentOS 6.4 (Final), Linux 2.6.32-358.23.2.el6.x86_64 x86_64, 64-bit
BIOS: HP P70 02/10/2014
Hostname: l-hbase10.dba.cn1.qunar.com
And i attach the hbase configuration file.
I am new to HBase, any idea will be appreciated!
Fwd: YCSB load data quit because hbase region too busy
Posted by 娄帅 <lo...@gmail.com>.
---------- Forwarded message ----------
From: mail list <lo...@gmail.com>
Date: 2014-11-20 12:37 GMT+08:00
Subject: YCSB load data quit because hbase region too busy
To: dev@hbase.apache.org
hi all,
I build an HBASE test environment, with three PC server, with CHD 5.1.0
pc1 pc2 pc3
pc1 and pc2 as HMASTER and hadoop namenode
pc3 as RegionServer and datanode
Then I create user as following:
create 'usertable', 'family', {SPLITS => (1..100).map {|i|
"user#{1000+i*(9999-1000)/100}"} }
Using YCSB for load data as following:
./bin/ycsb load hbase -P workloads/workloadc -p columnfamily=family -p
recordcount=1000000000 -p threadcount=32 -s > result/workloadc
But when after a while, the ycsb return with following error:
14/11/20 12:23:44 INFO client.AsyncProcess: #15, table=usertable,
attempt=35/35 failed 715 ops, last exception:
org.apache.hadoop.hbase.RegionTooBusyException:
org.apache.hadoop.hbase.RegionTooBusyException: Above memstore limit,
regionName=usertable,user9099,1416453519676.2552d36eb407a8af12d2b58c973d68a9.,
server=l-hbase10.dba.cn1.qunar.com,60020,1416451280772,
memstoreSize=536897120, blockingMemStoreSize=536870912
at
org.apache.hadoop.hbase.regionserver.HRegion.checkResources(HRegion.java:2822)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2234)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2201)
at
org.apache.hadoop.hbase.regionserver.HRegion.batchMutate(HRegion.java:2205)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doBatchOp(HRegionServer.java:4253)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.doNonAtomicRegionMutation(HRegionServer.java:3469)
at
org.apache.hadoop.hbase.regionserver.HRegionServer.multi(HRegionServer.java:3359)
at
org.apache.hadoop.hbase.protobuf.generated.ClientProtos$ClientService$2.callBlockingMethod(ClientProtos.java:29503)
at org.apache.hadoop.hbase.ipc.RpcServer.call(RpcServer.java:2012)
at org.apache.hadoop.hbase.ipc.CallRunner.run(CallRunner.java:98)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.consumerLoop(SimpleRpcScheduler.java:160)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler.access$000(SimpleRpcScheduler.java:38)
at
org.apache.hadoop.hbase.ipc.SimpleRpcScheduler$1.run(SimpleRpcScheduler.java:110)
at java.lang.Thread.run(Thread.java:744)
on l-hbase10.dba.cn1.qunar.com,60020,1416451280772, tracking started Thu
Nov 20 12:15:07 CST 2014, retrying after 20051 ms, replay 715 ops.
It seems the user9099 region is too busy, so I lookup the memstore metrics
in web:
As you see, the user9099 is bigger than other region, I think it is
flushing, but after a while, it does not change to a small size and YCSB
quit finally.
The region server is configured as below:
Summary: HP DL380p Gen8, 1 x Xeon E5-2630 v2 2.60GHz, 126GB / 128GB 1600MHz
DDR3
System: HP ProLiant DL380p Gen8
Processors: 1 (of 2) x Xeon E5-2630 v2 2.60GHz 100MHz FSB (HT enabled, 6
cores, 24 threads)
Memory: 126GB / 128GB 1600MHz DDR3 == 16 x 8GB, 8 x empty
Disk: sda (scsi2): 450GB (1%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk: sdb (scsi2): 27TB (0%) JBOD == 1 x HP-LOGICAL-VOLUME
Disk-Control: ata_piix0: Intel C600/X79 series chipset 4-Port SATA IDE
Controller
Disk-Control: hpsa0: Hewlett-Packard Company Smart Array Gen8 Controllers
Disk-Control: shannon0: Device 1cb0:0275
Network: eth0 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fc, 1000Mb/s <full-duplex>
Network: eth1 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fd, no carrier
Network: eth2 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:fe, no carrier
Network: eth3 (tg3): Broadcom NetXtreme BCM5719 Gigabit PCIe,
40:a8:f0:23:55:ff, no carrier
OS: CentOS 6.4 (Final), Linux 2.6.32-358.23.2.el6.x86_64 x86_64, 64-bit
BIOS: HP P70 02/10/2014
Hostname: l-hbase10.dba.cn1.qunar.com
And i attach the hbase configuration file.
I am new to HBase, any idea will be appreciated!