You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-users@xerces.apache.org by Atzenhoefer Joerg <Jo...@kuka-roboter.de> on 2008/04/21 10:53:19 UTC
Problem with XercesDOMParser
Hello,
I am working with Xercesc 2.7.0 in a VxWorks environment. In general it works fine
but there is a problem with one certain XML-file, where the parser does not return, i.e. it looks
like the parser runs into an endless loop. The schema file has some type definitions for
elements (e.g. "Dig_InOut_Type"). These elements are not generally required and in the
attached XML file they are missing (see comments starting with "e.g.").
XML and schema file are set up with XML Spy.
I tried to parse this file with the Xercesc Windows version and the behaviour is the same.
Is this a known problem ? What may be wrong with my code ?
Attached is the source code for parsing and the XML and Schema file.
Regards
Jörg
Re: Problem with XercesDOMParser
Posted by nelkherj <ne...@yahoo.com>.
Hi Jörg/Others,
I am trying to run the .configure file for vxWorks on a PPC. What did you
use for --host and other paramaters. Here is what I am using but it is not
"working":
./configure --disable-pretty-make
CXX=/windriver/gnu/4.1.2-vxworks-6.6/sun4-solaris2/bin/c++ppc
CC=/windriver/gnu/4.1.2-vxworks-6.6/sun4-solaris2/bin/ccppc CFLAGS='-ansi
-fno-builtin -fno-for-scope -Wall -mcpu=604 -mstrict-align -mlongcall
-fvolatile -fexceptions -fno-rtti -DRW_MULTI_THREAD -D_REENTRANT
-DCPU=PPC604 -DTOOL_FAMILY=gnu -DTOOL=gnu -DMV5500' CXXFLAGS='-ansi
-fno-builtin -fno-for-scope -Wall -mcpu=604 -mstrict-align -mlongcall
-fvolatile -fexceptions -fno-rtti -DRW_MULTI_THREAD -D_REENTRANT
-DCPU=PPC604 -DTOOL_FAMILY=gnu -DTOOL=gnu -DMV5500'
--prefix=/xerces-c-3.1.0/installdir
--exec-prefix=/xerces-c-3.1.0/installdir/arch
Hello,
I am working with Xercesc 2.7.0 in a VxWorks environment. In general it
works fine
but there is a problem with one certain XML-file .....
Regards
Jörg
--
View this message in context: http://old.nabble.com/Problem-with-XercesDOMParser-tp16805706p28537204.html
Sent from the Xerces - C - Users mailing list archive at Nabble.com.
AW: Problem with XercesDOMParser
Posted by Atzenhoefer Joerg <Jo...@kuka-roboter.de>.
Hello Alberto,
attached is the Schema file and the testcode.
Jörg
-----Ursprüngliche Nachricht-----
Von: Alberto Massari [mailto:amassari@datadirect.com]
Gesendet: Montag, 21. April 2008 11:37
An: c-users@xerces.apache.org
Betreff: Re: Problem with XercesDOMParser
Hi Jorg,
you didn't attach the XMLSchema...
Alberto
Atzenhoefer Joerg wrote:
> Hello,
>
> I am working with Xercesc 2.7.0 in a VxWorks environment. In general
> it works fine but there is a problem with one certain XML-file, where
> the parser does not return, i.e. it looks like the parser runs into an
> endless loop. The schema file has some type definitions for elements
> (e.g. "Dig_InOut_Type"). These elements are not generally required and
> in the attached XML file they are missing (see comments starting with
> "e.g.").
> XML and schema file are set up with XML Spy.
> I tried to parse this file with the Xercesc Windows version and the
> behaviour is the same.
> Is this a known problem ? What may be wrong with my code ?
> Attached is the source code for parsing and the XML and Schema file.
>
> Regards
> Jörg
Re: AW: Problem with XercesDOMParser
Posted by Alberto Massari <am...@datadirect.com>.
Hi Jörg,
you have hit a known limitation of Xerces (see
http://xerces.apache.org/xerces-c/schema.html): you use two
maxOccurs="4096" statements in the schema, and this causes the building
of a big table of validation states. Replacing those two statements with
maxOccurs="unbounded" will speed up validation.
Alberto
Atzenhoefer Joerg wrote:
> Hello Alberto,
>
> it looks like again attaching the Schema file did not work.
> Now I am sending it as text.
>
> <?xml version="1.0" encoding="UTF-8"?>
> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
> <xs:simpleType name="Bit_Offset_Range" final="">
> <xs:annotation>
> <xs:documentation>Range [0..7]</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:unsignedByte">
> <xs:minInclusive value="0"/>
> <xs:maxInclusive value="7"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Ana_IO_Range">
> <xs:annotation>
> <xs:documentation>Range [1..32]</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:unsignedByte">
> <xs:minInclusive value="1"/>
> <xs:maxInclusive value="32"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Dig_IO_Range" final="restriction">
> <xs:annotation>
> <xs:documentation>Range [1..4096]</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:unsignedInt">
> <xs:minInclusive value="1"/>
> <xs:maxInclusive value="4096"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Ana_Type" final="list">
> <xs:annotation>
> <xs:documentation>Format enumeration for analog IOs</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:string">
> <xs:enumeration value="signed"/>
> <xs:enumeration value="unsigned"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Access_Byte_Mask">
> <xs:annotation>
> <xs:documentation>String with 8 digits in [0, 1]</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:string">
> <xs:length value="8"/>
> <xs:pattern value="[0-1]{8}"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Drv_Name_Type">
> <xs:restriction base="xs:string">
> <xs:minLength value="1"/>
> <xs:maxLength value="32"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:simpleType name="Bus_Instance_Name_Type">
> <xs:annotation>
> <xs:documentation>Length limited, non-empty string for bus names</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:string">
> <xs:minLength value="1"/>
> <xs:maxLength value="512"/>
> </xs:restriction>
> </xs:simpleType>
> <xs:complexType name="Segment_Offset_Type">
> <xs:annotation>
> <xs:documentation>Byte- and Bit-Address to specify a segment offset</xs:documentation>
> </xs:annotation>
> <xs:attribute name="segmentByteOffset" type="xs:unsignedInt" use="required"/>
> <xs:attribute name="segmentBitOffset" type="Bit_Offset_Range" use="required"/>
> </xs:complexType>
> <xs:complexType name="Dig_InOut_Type">
> <xs:annotation>
> <xs:documentation>Type for the mapping of a digital IO</xs:documentation>
> </xs:annotation>
> <xs:sequence>
> <xs:element name="Start" type="Segment_Offset_Type"/>
> <xs:element name="End" type="Segment_Offset_Type" minOccurs="0"/>
> </xs:sequence>
> <xs:attribute name="krcStartIndex" type="Dig_IO_Range" use="required"/>
> <xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
> </xs:complexType>
> <xs:complexType name="Ana_InOut_Type">
> <xs:annotation>
> <xs:documentation>Type for the mapping of an analog IO</xs:documentation>
> </xs:annotation>
> <xs:sequence>
> <xs:element name="Start" type="Segment_Offset_Type"/>
> <xs:element name="End" type="Segment_Offset_Type"/>
> <xs:element name="Format">
> <xs:complexType>
> <xs:attribute name="cal" type="CAL_Range"/>
> <xs:attribute name="type" type="Ana_Type" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> <xs:attribute name="krcIndex" type="Ana_IO_Range" use="required"/>
> <xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
> </xs:complexType>
> <xs:element name="Application">
> <xs:annotation>
> <xs:documentation>Root Element</xs:documentation>
> </xs:annotation>
> <xs:complexType>
> <xs:sequence>
> <xs:element name="ProcessData">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Segment" minOccurs="0" maxOccurs="unbounded">
> <xs:complexType>
> <xs:sequence minOccurs="0" maxOccurs="unbounded">
> <xs:element name="AccessMask" minOccurs="0">
> <xs:complexType>
> <xs:attribute name="byteNr" type="xs:unsignedInt" use="required"/>
> <xs:attribute name="mask" type="Access_Byte_Mask" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> <xs:attribute name="drvName" type="Drv_Name_Type" use="required"/>
> <xs:attribute name="busInstanceName" use="required">
> <xs:simpleType>
> <xs:restriction base="Bus_Instance_Name_Type"/>
> </xs:simpleType>
> </xs:attribute>
> <xs:attribute name="byteOffset" type="xs:unsignedInt" use="required"/>
> <xs:attribute name="byteSize" type="xs:unsignedInt" use="required"/>
> <xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Mapping">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Output">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Digital">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Out" type="Dig_InOut_Type" minOccurs="0" maxOccurs="4096"/>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Analog">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Anout" type="Ana_InOut_Type" minOccurs="0" maxOccurs="32"/>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Input">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Digital">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="In" type="Dig_InOut_Type" minOccurs="0" maxOccurs="4096"/>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Analog">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="Anin" type="Ana_InOut_Type" minOccurs="0" maxOccurs="32"/>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="IOLinking">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="IOLink" minOccurs="0" maxOccurs="32">
> <xs:complexType>
> <xs:attribute name="krcInputIndex" type="Dig_IO_Range" use="required"/>
> <xs:attribute name="krcOutputIndex" type="Dig_IO_Range" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Options" minOccurs="0">
> <xs:complexType>
> <xs:sequence>
> <xs:element name="DataIntegrity">
> <xs:complexType>
> <xs:attribute name="value" type="xs:boolean" use="required"/>
> </xs:complexType>
> </xs:element>
> <xs:element name="NrOfInOut">
> <xs:complexType>
> <xs:attribute name="value" type="Dig_IO_Range" use="required"/>
> </xs:complexType>
> </xs:element>
> <xs:element name="Trigger" minOccurs="0">
> <xs:complexType>
> <xs:sequence minOccurs="0">
> <xs:element name="Bus" minOccurs="0" maxOccurs="unbounded">
> <xs:complexType>
> <xs:attribute name="busInstanceName" type="Bus_Instance_Name_Type" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> <xs:element name="Stream" minOccurs="0">
> <xs:complexType>
> <xs:sequence minOccurs="0">
> <xs:element name="Bus" minOccurs="0" maxOccurs="unbounded">
> <xs:complexType>
> <xs:attribute name="busInstanceName" type="Bus_Instance_Name_Type" use="required"/>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> </xs:complexType>
> </xs:element>
> </xs:sequence>
> <xs:attribute name="kukaVersion" type="xs:string" use="required"/>
> </xs:complexType>
> </xs:element>
> <xs:simpleType name="CAL_Range" final="restriction">
> <xs:annotation>
> <xs:documentation>Range[1..65535]</xs:documentation>
> </xs:annotation>
> <xs:restriction base="xs:unsignedInt">
> <xs:minInclusive value="1"/>
> <xs:maxInclusive value="65535"/>
> </xs:restriction>
> </xs:simpleType>
> </xs:schema>
>
>
> Jörg
>
> -----Ursprüngliche Nachricht-----
> Von: Alberto Massari [mailto:amassari@datadirect.com]
> Gesendet: Montag, 21. April 2008 11:37
> An: c-users@xerces.apache.org
> Betreff: Re: Problem with XercesDOMParser
>
> Hi Jorg,
> you didn't attach the XMLSchema...
>
> Alberto
>
>
> Atzenhoefer Joerg wrote:
>
>> Hello,
>>
>> I am working with Xercesc 2.7.0 in a VxWorks environment. In general
>> it works fine but there is a problem with one certain XML-file, where
>> the parser does not return, i.e. it looks like the parser runs into an
>> endless loop. The schema file has some type definitions for elements
>> (e.g. "Dig_InOut_Type"). These elements are not generally required and
>> in the attached XML file they are missing (see comments starting with
>> "e.g.").
>> XML and schema file are set up with XML Spy.
>> I tried to parse this file with the Xercesc Windows version and the
>> behaviour is the same.
>> Is this a known problem ? What may be wrong with my code ?
>> Attached is the source code for parsing and the XML and Schema file.
>>
>> Regards
>> Jörg
>>
>
>
>
>
>
AW: Problem with XercesDOMParser
Posted by Atzenhoefer Joerg <Jo...@kuka-roboter.de>.
Hello Alberto,
it looks like again attaching the Schema file did not work.
Now I am sending it as text.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:simpleType name="Bit_Offset_Range" final="">
<xs:annotation>
<xs:documentation>Range [0..7]</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:unsignedByte">
<xs:minInclusive value="0"/>
<xs:maxInclusive value="7"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Ana_IO_Range">
<xs:annotation>
<xs:documentation>Range [1..32]</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:unsignedByte">
<xs:minInclusive value="1"/>
<xs:maxInclusive value="32"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Dig_IO_Range" final="restriction">
<xs:annotation>
<xs:documentation>Range [1..4096]</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:unsignedInt">
<xs:minInclusive value="1"/>
<xs:maxInclusive value="4096"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Ana_Type" final="list">
<xs:annotation>
<xs:documentation>Format enumeration for analog IOs</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="signed"/>
<xs:enumeration value="unsigned"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Access_Byte_Mask">
<xs:annotation>
<xs:documentation>String with 8 digits in [0, 1]</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:length value="8"/>
<xs:pattern value="[0-1]{8}"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Drv_Name_Type">
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="32"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Bus_Instance_Name_Type">
<xs:annotation>
<xs:documentation>Length limited, non-empty string for bus names</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="512"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="Segment_Offset_Type">
<xs:annotation>
<xs:documentation>Byte- and Bit-Address to specify a segment offset</xs:documentation>
</xs:annotation>
<xs:attribute name="segmentByteOffset" type="xs:unsignedInt" use="required"/>
<xs:attribute name="segmentBitOffset" type="Bit_Offset_Range" use="required"/>
</xs:complexType>
<xs:complexType name="Dig_InOut_Type">
<xs:annotation>
<xs:documentation>Type for the mapping of a digital IO</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Start" type="Segment_Offset_Type"/>
<xs:element name="End" type="Segment_Offset_Type" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="krcStartIndex" type="Dig_IO_Range" use="required"/>
<xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
</xs:complexType>
<xs:complexType name="Ana_InOut_Type">
<xs:annotation>
<xs:documentation>Type for the mapping of an analog IO</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Start" type="Segment_Offset_Type"/>
<xs:element name="End" type="Segment_Offset_Type"/>
<xs:element name="Format">
<xs:complexType>
<xs:attribute name="cal" type="CAL_Range"/>
<xs:attribute name="type" type="Ana_Type" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="krcIndex" type="Ana_IO_Range" use="required"/>
<xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
</xs:complexType>
<xs:element name="Application">
<xs:annotation>
<xs:documentation>Root Element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="ProcessData">
<xs:complexType>
<xs:sequence>
<xs:element name="Segment" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="AccessMask" minOccurs="0">
<xs:complexType>
<xs:attribute name="byteNr" type="xs:unsignedInt" use="required"/>
<xs:attribute name="mask" type="Access_Byte_Mask" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="drvName" type="Drv_Name_Type" use="required"/>
<xs:attribute name="busInstanceName" use="required">
<xs:simpleType>
<xs:restriction base="Bus_Instance_Name_Type"/>
</xs:simpleType>
</xs:attribute>
<xs:attribute name="byteOffset" type="xs:unsignedInt" use="required"/>
<xs:attribute name="byteSize" type="xs:unsignedInt" use="required"/>
<xs:attribute name="segmentID" type="xs:unsignedInt" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Mapping">
<xs:complexType>
<xs:sequence>
<xs:element name="Output">
<xs:complexType>
<xs:sequence>
<xs:element name="Digital">
<xs:complexType>
<xs:sequence>
<xs:element name="Out" type="Dig_InOut_Type" minOccurs="0" maxOccurs="4096"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Analog">
<xs:complexType>
<xs:sequence>
<xs:element name="Anout" type="Ana_InOut_Type" minOccurs="0" maxOccurs="32"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Input">
<xs:complexType>
<xs:sequence>
<xs:element name="Digital">
<xs:complexType>
<xs:sequence>
<xs:element name="In" type="Dig_InOut_Type" minOccurs="0" maxOccurs="4096"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Analog">
<xs:complexType>
<xs:sequence>
<xs:element name="Anin" type="Ana_InOut_Type" minOccurs="0" maxOccurs="32"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="IOLinking">
<xs:complexType>
<xs:sequence>
<xs:element name="IOLink" minOccurs="0" maxOccurs="32">
<xs:complexType>
<xs:attribute name="krcInputIndex" type="Dig_IO_Range" use="required"/>
<xs:attribute name="krcOutputIndex" type="Dig_IO_Range" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Options" minOccurs="0">
<xs:complexType>
<xs:sequence>
<xs:element name="DataIntegrity">
<xs:complexType>
<xs:attribute name="value" type="xs:boolean" use="required"/>
</xs:complexType>
</xs:element>
<xs:element name="NrOfInOut">
<xs:complexType>
<xs:attribute name="value" type="Dig_IO_Range" use="required"/>
</xs:complexType>
</xs:element>
<xs:element name="Trigger" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0">
<xs:element name="Bus" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:attribute name="busInstanceName" type="Bus_Instance_Name_Type" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Stream" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0">
<xs:element name="Bus" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:attribute name="busInstanceName" type="Bus_Instance_Name_Type" use="required"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="kukaVersion" type="xs:string" use="required"/>
</xs:complexType>
</xs:element>
<xs:simpleType name="CAL_Range" final="restriction">
<xs:annotation>
<xs:documentation>Range[1..65535]</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:unsignedInt">
<xs:minInclusive value="1"/>
<xs:maxInclusive value="65535"/>
</xs:restriction>
</xs:simpleType>
</xs:schema>
Jörg
-----Ursprüngliche Nachricht-----
Von: Alberto Massari [mailto:amassari@datadirect.com]
Gesendet: Montag, 21. April 2008 11:37
An: c-users@xerces.apache.org
Betreff: Re: Problem with XercesDOMParser
Hi Jorg,
you didn't attach the XMLSchema...
Alberto
Atzenhoefer Joerg wrote:
> Hello,
>
> I am working with Xercesc 2.7.0 in a VxWorks environment. In general
> it works fine but there is a problem with one certain XML-file, where
> the parser does not return, i.e. it looks like the parser runs into an
> endless loop. The schema file has some type definitions for elements
> (e.g. "Dig_InOut_Type"). These elements are not generally required and
> in the attached XML file they are missing (see comments starting with
> "e.g.").
> XML and schema file are set up with XML Spy.
> I tried to parse this file with the Xercesc Windows version and the
> behaviour is the same.
> Is this a known problem ? What may be wrong with my code ?
> Attached is the source code for parsing and the XML and Schema file.
>
> Regards
> Jörg
Re: Problem with XercesDOMParser
Posted by Alberto Massari <am...@datadirect.com>.
Hi Jorg,
you didn't attach the XMLSchema...
Alberto
Atzenhoefer Joerg wrote:
> Hello,
>
> I am working with Xercesc 2.7.0 in a VxWorks environment. In general
> it works fine
> but there is a problem with one certain XML-file, where the parser
> does not return, i.e. it looks
> like the parser runs into an endless loop. The schema file has some
> type definitions for
> elements (e.g. "Dig_InOut_Type"). These elements are not generally
> required and in the
> attached XML file they are missing (see comments starting with "e.g.").
> XML and schema file are set up with XML Spy.
> I tried to parse this file with the Xercesc Windows version and the
> behaviour is the same.
> Is this a known problem ? What may be wrong with my code ?
> Attached is the source code for parsing and the XML and Schema file.
>
> Regards
> Jörg