You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by Mike Tutkowski <mi...@solidfire.com> on 2015/01/08 19:54:10 UTC

[QUESTION] Integration Port

Hi,

I noticed with 4.6 that if I run this command that I get back no volumes:

http://192.168.129.88:8096/api?command=listVolumes

This seemed odd (since I have user-facing volumes) and I tracked it down to
one parameter:

listAll

It appears when using the integration port that listAll is null by default,
which (in this case) is interpreted the same as false.

That being the case, to retrieve volumes via the integration port, I had to
run the following instead:

http://192.168.129.88:8096/api?command=listVolumes&listAll=true

This seems like it might be a recent change. Does anyone know if this is on
purpose? The problem is that my tests in Marvin fail now because no volumes
come back when they're expected.

Thanks!

-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*

Re: [QUESTION] Integration Port

Posted by Mike Tutkowski <mi...@solidfire.com>.
Thanks, Nitin!

I had not seen this Wiki page before.

On Fri, Jan 9, 2015 at 1:56 AM, Nitin Mehta <Ni...@citrix.com> wrote:

> Some documentation on list API can be found at
> https://cwiki.apache.org/confluence/display/CLOUDSTACK/List*+API+commands+r
> ules
>
> Thanks,
> -Nitin
>
> On 08/01/15 12:51 PM, "Mike Tutkowski" <mi...@solidfire.com>
> wrote:
>
> >Thanks for the response.
> >
> >I was under the impression that listAll used to return all volumes
> >(regardless of account) when I issued the command via a web browser using
> >8096 in the past. Perhaps I was not remembering that correctly.
> >
> >Thanks again
> >
> >On Thu, Jan 8, 2015 at 1:30 PM, Prachi Damle <Pr...@citrix.com>
> >wrote:
> >
> >> Hey Mike,
> >>
> >> I am not aware if anything has changed w.r.t listAll recently. But just
> >> mentioning that with port 8096, CS assumes that the caller is the System
> >> user (ACCOUNT_TYPE_ADMIN)
> >> So listVolumes without listAll = true will list only the Volumes owned
> >>by
> >> the System account, which will be an empty set most likely.
> >> When listAll is null, the value is false by default.
> >>
> >> When you specify  listAll = true, volumes of other users will be listed.
> >>
> >> Did your System user own any volumes? Only then your tests would have
> >>got
> >> back some volumes earlier.
> >>
> >> Thanks,
> >> Prachi
> >>
> >> ________________________________________
> >> From: Stephen Turner
> >> Sent: Thursday, January 08, 2015 10:59 AM
> >> To: dev@cloudstack.apache.org
> >> Cc: Vania Xu; Min Chen; Prachi Damle
> >> Subject: RE: [QUESTION] Integration Port
> >>
> >> Min or Prachi might have some information on this.
> >>
> >> --
> >> Stephen Turner
> >>
> >>
> >> -----Original Message-----
> >> From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
> >> Sent: 08 January 2015 18:54
> >> To: dev@cloudstack.apache.org
> >> Cc: Vania Xu
> >> Subject: [QUESTION] Integration Port
> >>
> >> Hi,
> >>
> >> I noticed with 4.6 that if I run this command that I get back no
> >>volumes:
> >>
> >>
> >>
> >>
> http://secure-web.cisco.com/1QFfmjJfPvcx0_-c2Ry2iMJZQHE8ZkZPxYagenr8okTkT
> >>5LN35jPMNLSWMSlsNcpCbKakeL3n1SGr7NrB7VJxPXkckQnj0c24Zd_MnZqiMf3_1tD3X7XYB
> >>hh_VGLPrN0ofZwPxQTqU2vmBVRqCsrf84l-rrCA6DmVrECQk23mZak/http%3A%2F%2F192.1
> >>68.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes
> >>
> >> This seemed odd (since I have user-facing volumes) and I tracked it down
> >> to one parameter:
> >>
> >> listAll
> >>
> >> It appears when using the integration port that listAll is null by
> >> default, which (in this case) is interpreted the same as false.
> >>
> >> That being the case, to retrieve volumes via the integration port, I had
> >> to run the following instead:
> >>
> >>
> >>
> >>
> http://secure-web.cisco.com/1P_Ssx1LBDJxkhmdc3ZiFePzQhF3rlwXuG8usVFV6agN8
> >>RdL72LxFKeEJW-j4u6ClGUjI8ROYXCau2Y3QkOfvjL4scB4yquuafmB5Bsa9y1JYhNldfPOrV
> >>aS6fNTheWms0pyrvZtQwAR7X8XCxErN53BBLWnYN80wiIpTfSJF7_0/http%3A%2F%2F192.1
> >>68.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes%26listAll%3Dtrue
> >>
> >> This seems like it might be a recent change. Does anyone know if this is
> >> on purpose? The problem is that my tests in Marvin fail now because no
> >> volumes come back when they're expected.
> >>
> >> Thanks!
> >>
> >> --
> >> *Mike Tutkowski*
> >> *Senior CloudStack Developer, SolidFire Inc.*
> >> e: mike.tutkowski@solidfire.com
> >> o: 303.746.7302
> >> Advancing the way the world uses the cloud
> >> <http://solidfire.com/solution/overview/?video=play>* *
> >>
> >
> >
> >
> >--
> >*Mike Tutkowski*
> >*Senior CloudStack Developer, SolidFire Inc.*
> >e: mike.tutkowski@solidfire.com
> >o: 303.746.7302
> >Advancing the way the world uses the cloud
> ><http://solidfire.com/solution/overview/?video=play>* *
>
>


-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*

Re: [QUESTION] Integration Port

Posted by Nitin Mehta <Ni...@citrix.com>.
Some documentation on list API can be found at
https://cwiki.apache.org/confluence/display/CLOUDSTACK/List*+API+commands+r
ules

Thanks,
-Nitin

On 08/01/15 12:51 PM, "Mike Tutkowski" <mi...@solidfire.com>
wrote:

>Thanks for the response.
>
>I was under the impression that listAll used to return all volumes
>(regardless of account) when I issued the command via a web browser using
>8096 in the past. Perhaps I was not remembering that correctly.
>
>Thanks again
>
>On Thu, Jan 8, 2015 at 1:30 PM, Prachi Damle <Pr...@citrix.com>
>wrote:
>
>> Hey Mike,
>>
>> I am not aware if anything has changed w.r.t listAll recently. But just
>> mentioning that with port 8096, CS assumes that the caller is the System
>> user (ACCOUNT_TYPE_ADMIN)
>> So listVolumes without listAll = true will list only the Volumes owned
>>by
>> the System account, which will be an empty set most likely.
>> When listAll is null, the value is false by default.
>>
>> When you specify  listAll = true, volumes of other users will be listed.
>>
>> Did your System user own any volumes? Only then your tests would have
>>got
>> back some volumes earlier.
>>
>> Thanks,
>> Prachi
>>
>> ________________________________________
>> From: Stephen Turner
>> Sent: Thursday, January 08, 2015 10:59 AM
>> To: dev@cloudstack.apache.org
>> Cc: Vania Xu; Min Chen; Prachi Damle
>> Subject: RE: [QUESTION] Integration Port
>>
>> Min or Prachi might have some information on this.
>>
>> --
>> Stephen Turner
>>
>>
>> -----Original Message-----
>> From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
>> Sent: 08 January 2015 18:54
>> To: dev@cloudstack.apache.org
>> Cc: Vania Xu
>> Subject: [QUESTION] Integration Port
>>
>> Hi,
>>
>> I noticed with 4.6 that if I run this command that I get back no
>>volumes:
>>
>>
>> 
>>http://secure-web.cisco.com/1QFfmjJfPvcx0_-c2Ry2iMJZQHE8ZkZPxYagenr8okTkT
>>5LN35jPMNLSWMSlsNcpCbKakeL3n1SGr7NrB7VJxPXkckQnj0c24Zd_MnZqiMf3_1tD3X7XYB
>>hh_VGLPrN0ofZwPxQTqU2vmBVRqCsrf84l-rrCA6DmVrECQk23mZak/http%3A%2F%2F192.1
>>68.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes
>>
>> This seemed odd (since I have user-facing volumes) and I tracked it down
>> to one parameter:
>>
>> listAll
>>
>> It appears when using the integration port that listAll is null by
>> default, which (in this case) is interpreted the same as false.
>>
>> That being the case, to retrieve volumes via the integration port, I had
>> to run the following instead:
>>
>>
>> 
>>http://secure-web.cisco.com/1P_Ssx1LBDJxkhmdc3ZiFePzQhF3rlwXuG8usVFV6agN8
>>RdL72LxFKeEJW-j4u6ClGUjI8ROYXCau2Y3QkOfvjL4scB4yquuafmB5Bsa9y1JYhNldfPOrV
>>aS6fNTheWms0pyrvZtQwAR7X8XCxErN53BBLWnYN80wiIpTfSJF7_0/http%3A%2F%2F192.1
>>68.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes%26listAll%3Dtrue
>>
>> This seems like it might be a recent change. Does anyone know if this is
>> on purpose? The problem is that my tests in Marvin fail now because no
>> volumes come back when they're expected.
>>
>> Thanks!
>>
>> --
>> *Mike Tutkowski*
>> *Senior CloudStack Developer, SolidFire Inc.*
>> e: mike.tutkowski@solidfire.com
>> o: 303.746.7302
>> Advancing the way the world uses the cloud
>> <http://solidfire.com/solution/overview/?video=play>**
>>
>
>
>
>-- 
>*Mike Tutkowski*
>*Senior CloudStack Developer, SolidFire Inc.*
>e: mike.tutkowski@solidfire.com
>o: 303.746.7302
>Advancing the way the world uses the cloud
><http://solidfire.com/solution/overview/?video=play>**


Re: [QUESTION] Integration Port

Posted by Mike Tutkowski <mi...@solidfire.com>.
Thanks for the response.

I was under the impression that listAll used to return all volumes
(regardless of account) when I issued the command via a web browser using
8096 in the past. Perhaps I was not remembering that correctly.

Thanks again

On Thu, Jan 8, 2015 at 1:30 PM, Prachi Damle <Pr...@citrix.com>
wrote:

> Hey Mike,
>
> I am not aware if anything has changed w.r.t listAll recently. But just
> mentioning that with port 8096, CS assumes that the caller is the System
> user (ACCOUNT_TYPE_ADMIN)
> So listVolumes without listAll = true will list only the Volumes owned by
> the System account, which will be an empty set most likely.
> When listAll is null, the value is false by default.
>
> When you specify  listAll = true, volumes of other users will be listed.
>
> Did your System user own any volumes? Only then your tests would have got
> back some volumes earlier.
>
> Thanks,
> Prachi
>
> ________________________________________
> From: Stephen Turner
> Sent: Thursday, January 08, 2015 10:59 AM
> To: dev@cloudstack.apache.org
> Cc: Vania Xu; Min Chen; Prachi Damle
> Subject: RE: [QUESTION] Integration Port
>
> Min or Prachi might have some information on this.
>
> --
> Stephen Turner
>
>
> -----Original Message-----
> From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
> Sent: 08 January 2015 18:54
> To: dev@cloudstack.apache.org
> Cc: Vania Xu
> Subject: [QUESTION] Integration Port
>
> Hi,
>
> I noticed with 4.6 that if I run this command that I get back no volumes:
>
>
> http://secure-web.cisco.com/1QFfmjJfPvcx0_-c2Ry2iMJZQHE8ZkZPxYagenr8okTkT5LN35jPMNLSWMSlsNcpCbKakeL3n1SGr7NrB7VJxPXkckQnj0c24Zd_MnZqiMf3_1tD3X7XYBhh_VGLPrN0ofZwPxQTqU2vmBVRqCsrf84l-rrCA6DmVrECQk23mZak/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes
>
> This seemed odd (since I have user-facing volumes) and I tracked it down
> to one parameter:
>
> listAll
>
> It appears when using the integration port that listAll is null by
> default, which (in this case) is interpreted the same as false.
>
> That being the case, to retrieve volumes via the integration port, I had
> to run the following instead:
>
>
> http://secure-web.cisco.com/1P_Ssx1LBDJxkhmdc3ZiFePzQhF3rlwXuG8usVFV6agN8RdL72LxFKeEJW-j4u6ClGUjI8ROYXCau2Y3QkOfvjL4scB4yquuafmB5Bsa9y1JYhNldfPOrVaS6fNTheWms0pyrvZtQwAR7X8XCxErN53BBLWnYN80wiIpTfSJF7_0/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes%26listAll%3Dtrue
>
> This seems like it might be a recent change. Does anyone know if this is
> on purpose? The problem is that my tests in Marvin fail now because no
> volumes come back when they're expected.
>
> Thanks!
>
> --
> *Mike Tutkowski*
> *Senior CloudStack Developer, SolidFire Inc.*
> e: mike.tutkowski@solidfire.com
> o: 303.746.7302
> Advancing the way the world uses the cloud
> <http://solidfire.com/solution/overview/?video=play>*™*
>



-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*

RE: [QUESTION] Integration Port

Posted by Prachi Damle <Pr...@citrix.com>.
Hey Mike,

I am not aware if anything has changed w.r.t listAll recently. But just mentioning that with port 8096, CS assumes that the caller is the System user (ACCOUNT_TYPE_ADMIN)
So listVolumes without listAll = true will list only the Volumes owned by the System account, which will be an empty set most likely. 
When listAll is null, the value is false by default.

When you specify  listAll = true, volumes of other users will be listed.

Did your System user own any volumes? Only then your tests would have got back some volumes earlier.

Thanks,
Prachi

________________________________________
From: Stephen Turner
Sent: Thursday, January 08, 2015 10:59 AM
To: dev@cloudstack.apache.org
Cc: Vania Xu; Min Chen; Prachi Damle
Subject: RE: [QUESTION] Integration Port

Min or Prachi might have some information on this.

--
Stephen Turner


-----Original Message-----
From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
Sent: 08 January 2015 18:54
To: dev@cloudstack.apache.org
Cc: Vania Xu
Subject: [QUESTION] Integration Port

Hi,

I noticed with 4.6 that if I run this command that I get back no volumes:

http://secure-web.cisco.com/1QFfmjJfPvcx0_-c2Ry2iMJZQHE8ZkZPxYagenr8okTkT5LN35jPMNLSWMSlsNcpCbKakeL3n1SGr7NrB7VJxPXkckQnj0c24Zd_MnZqiMf3_1tD3X7XYBhh_VGLPrN0ofZwPxQTqU2vmBVRqCsrf84l-rrCA6DmVrECQk23mZak/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes

This seemed odd (since I have user-facing volumes) and I tracked it down to one parameter:

listAll

It appears when using the integration port that listAll is null by default, which (in this case) is interpreted the same as false.

That being the case, to retrieve volumes via the integration port, I had to run the following instead:

http://secure-web.cisco.com/1P_Ssx1LBDJxkhmdc3ZiFePzQhF3rlwXuG8usVFV6agN8RdL72LxFKeEJW-j4u6ClGUjI8ROYXCau2Y3QkOfvjL4scB4yquuafmB5Bsa9y1JYhNldfPOrVaS6fNTheWms0pyrvZtQwAR7X8XCxErN53BBLWnYN80wiIpTfSJF7_0/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes%26listAll%3Dtrue

This seems like it might be a recent change. Does anyone know if this is on purpose? The problem is that my tests in Marvin fail now because no volumes come back when they're expected.

Thanks!

--
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*

RE: [QUESTION] Integration Port

Posted by Stephen Turner <St...@citrix.com>.
Min or Prachi might have some information on this.

-- 
Stephen Turner


-----Original Message-----
From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com] 
Sent: 08 January 2015 18:54
To: dev@cloudstack.apache.org
Cc: Vania Xu
Subject: [QUESTION] Integration Port

Hi,

I noticed with 4.6 that if I run this command that I get back no volumes:

http://secure-web.cisco.com/1QFfmjJfPvcx0_-c2Ry2iMJZQHE8ZkZPxYagenr8okTkT5LN35jPMNLSWMSlsNcpCbKakeL3n1SGr7NrB7VJxPXkckQnj0c24Zd_MnZqiMf3_1tD3X7XYBhh_VGLPrN0ofZwPxQTqU2vmBVRqCsrf84l-rrCA6DmVrECQk23mZak/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes

This seemed odd (since I have user-facing volumes) and I tracked it down to one parameter:

listAll

It appears when using the integration port that listAll is null by default, which (in this case) is interpreted the same as false.

That being the case, to retrieve volumes via the integration port, I had to run the following instead:

http://secure-web.cisco.com/1P_Ssx1LBDJxkhmdc3ZiFePzQhF3rlwXuG8usVFV6agN8RdL72LxFKeEJW-j4u6ClGUjI8ROYXCau2Y3QkOfvjL4scB4yquuafmB5Bsa9y1JYhNldfPOrVaS6fNTheWms0pyrvZtQwAR7X8XCxErN53BBLWnYN80wiIpTfSJF7_0/http%3A%2F%2F192.168.129.88%3A8096%2Fapi%3Fcommand%3DlistVolumes%26listAll%3Dtrue

This seems like it might be a recent change. Does anyone know if this is on purpose? The problem is that my tests in Marvin fail now because no volumes come back when they're expected.

Thanks!

--
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the cloud
<http://solidfire.com/solution/overview/?video=play>*™*