You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@flex.apache.org by Alex Harui <ah...@adobe.com> on 2012/03/26 20:30:54 UTC
360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
On 3/19/12 10:04 AM, "Michael A. Labriola" <la...@digitalprimates.net>
wrote:
>> Mike Labriola said Spoon was going to handle buttons for 360Flex.
>> Mike, let me know if you want me to select a printing company or if you have
>> someone who will do it.
>
> Feel free to select and just forward me the information.
So far, the only vendor suggested is Zazzle.com and it appears the cost
would be $2.45 per button. I found another site on the internet that will do
it for $1.11 per button. Should we save the money and take a chance on
them?
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
Re: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by Alex Harui <ah...@adobe.com>.
On 4/4/12 8:26 PM, "Alex Harui" <ah...@adobe.com> wrote:
>> Any status on this. Still willing to pay but time is getting short.
>>
> I pinged them today. I think we had a miscommunication. Hopefully we'll
> get it solved in time.
I sent you the image files off-line (it was 10MB).
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
Re: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by Alex Harui <ah...@adobe.com>.
On 4/4/12 8:02 PM, "Michael A. Labriola" <la...@digitalprimates.net>
wrote:
>> OK, I'm adding Adrian who will help us with the design while Tomacz is away.
>>
>> Adrian, do you have the draft design from Tomacz? The zazzle site says the
>> button design should be at minimum:
>>
>> 200ppi 450x450 (2.25 inch diameter button)
>>
>> The link below [1] seems to indicate you can go higher if you need to.
>>
>> [1] http://www.zazzle.com/cr/design/pt-zazzle_button
>>
>
> Any status on this. Still willing to pay but time is getting short.
>
I pinged them today. I think we had a miscommunication. Hopefully we'll
get it solved in time.
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
RE: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by "Michael A. Labriola" <la...@digitalprimates.net>.
>OK, I'm adding Adrian who will help us with the design while Tomacz is away.
>
>Adrian, do you have the draft design from Tomacz? The zazzle site says the button design should be at minimum:
>
> 200ppi 450x450 (2.25 inch diameter button)
>
>The link below [1] seems to indicate you can go higher if you need to.
>
>[1] http://www.zazzle.com/cr/design/pt-zazzle_button
>
Any status on this. Still willing to pay but time is getting short.
Mike
Re: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by Alex Harui <ah...@adobe.com>.
On 3/27/12 11:02 AM, "Michael A. Labriola" <la...@digitalprimates.net>
wrote:
>
> Let just get this ready and let me know what needs to be done to place the
> order and I will take care of it. The zazzle price is fine with me
>
> Mike
>
OK, I'm adding Adrian who will help us with the design while Tomacz is away.
Adrian, do you have the draft design from Tomacz? The zazzle site says the
button design should be at minimum:
200ppi 450x450 (2.25 inch diameter button)
The link below [1] seems to indicate you can go higher if you need to.
[1] http://www.zazzle.com/cr/design/pt-zazzle_button
Thanks,
--
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui
RE: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by "Michael A. Labriola" <la...@digitalprimates.net>.
> > So far, the only vendor suggested is Zazzle.com and it appears the
> > cost would be $2.45 per button.
Let just get this ready and let me know what needs to be done to place the order and I will take care of it. The zazzle price is fine with me
Mike
Re: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by Pierangelo Mancusi <pi...@gmail.com>.
how can the community donate something? for example some money to buy
buttoms?
:-)
Il giorno 26/mar/2012 23:34, "Doug Arthur" <do...@gmail.com> ha
scritto:
> I would go with the suggested if there's enough donations from the group.
> We want to be represented properly, and reputation on printing buttons
> would seem like an important factor for a group that focuses a lot on UI. I
> don't want a fuzzy button, I want a nice clean sharp looking button!
>
> My 2 cents.
>
> - Doug
>
> On Mon, Mar 26, 2012 at 12:30 PM, Alex Harui <ah...@adobe.com> wrote:
>
> >
> >
> >
> > On 3/19/12 10:04 AM, "Michael A. Labriola" <labriola@digitalprimates.net
> >
> > wrote:
> >
> > >> Mike Labriola said Spoon was going to handle buttons for 360Flex.
> > >> Mike, let me know if you want me to select a printing company or if
> you
> > have
> > >> someone who will do it.
> > >
> > > Feel free to select and just forward me the information.
> > So far, the only vendor suggested is Zazzle.com and it appears the cost
> > would be $2.45 per button. I found another site on the internet that will
> > do
> > it for $1.11 per button. Should we save the money and take a chance on
> > them?
> >
> > --
> > Alex Harui
> > Flex SDK Team
> > Adobe Systems, Inc.
> > http://blogs.adobe.com/aharui
> >
> >
>
Re: 360Flex Buttons (was: [OT] 360 Flex Denver 2012 - Apache Flex
Discovery Room)
Posted by Doug Arthur <do...@gmail.com>.
I would go with the suggested if there's enough donations from the group.
We want to be represented properly, and reputation on printing buttons
would seem like an important factor for a group that focuses a lot on UI. I
don't want a fuzzy button, I want a nice clean sharp looking button!
My 2 cents.
- Doug
On Mon, Mar 26, 2012 at 12:30 PM, Alex Harui <ah...@adobe.com> wrote:
>
>
>
> On 3/19/12 10:04 AM, "Michael A. Labriola" <la...@digitalprimates.net>
> wrote:
>
> >> Mike Labriola said Spoon was going to handle buttons for 360Flex.
> >> Mike, let me know if you want me to select a printing company or if you
> have
> >> someone who will do it.
> >
> > Feel free to select and just forward me the information.
> So far, the only vendor suggested is Zazzle.com and it appears the cost
> would be $2.45 per button. I found another site on the internet that will
> do
> it for $1.11 per button. Should we save the money and take a chance on
> them?
>
> --
> Alex Harui
> Flex SDK Team
> Adobe Systems, Inc.
> http://blogs.adobe.com/aharui
>
>