You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@cloudstack.apache.org by ustcweizhou <gi...@git.apache.org> on 2015/12/10 14:03:09 UTC
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
GitHub user ustcweizhou opened a pull request:
https://github.com/apache/cloudstack/pull/1209
CLOUDSTACK-9134: set device_id as the first device_id not in use instead of nic count
when we restart vpc tiers, the old nics will be removed, and create a new nic.
however, the device_id was set to the nic count, which may be already used.
this commit get the first device_id not in use as the device_id of new nic.
This issue also happen when we add multiple networks to a vm and remove them.
You can merge this pull request into a Git repository by running:
$ git pull https://github.com/ustcweizhou/cloudstack free-deviceid
Alternatively you can review and apply these changes as the patch at:
https://github.com/apache/cloudstack/pull/1209.patch
To close this pull request, make a commit to your master/trunk branch
with (at least) the following in the commit message:
This closes #1209
----
commit acfc19dc8285a07412ee0078fbc13d7319d5be8b
Author: Wei Zhou <w....@tech.leaseweb.com>
Date: 2015-12-10T12:26:02Z
CLOUDSTACK-9134: set device_id as the first device_id not in use instead of nic count
when we restart vpc tiers, the old nics will be removed, and create a new nic.
however, the device_id was set to the nic count, which may be already used.
this commit get the first device_id not in use as the device_id of new nic.
This issue also happen when we add multiple networks to a vm and remove them.
----
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
Posted by asfgit <gi...@git.apache.org>.
Github user asfgit closed the pull request at:
https://github.com/apache/cloudstack/pull/1209
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
Posted by borisroman <gi...@git.apache.org>.
Github user borisroman commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1209#discussion_r47435854
--- Diff: engine/schema/src/com/cloud/vm/dao/NicDaoImpl.java ---
@@ -222,11 +222,20 @@ public String getIpAddress(long networkId, long instanceId) {
}
@Override
- public int countNics(long instanceId) {
- SearchCriteria<Integer> sc = CountBy.create();
- sc.setParameters("vmId", instanceId);
- List<Integer> results = customSearch(sc, null);
- return results.get(0);
+ public int getFreeDeviceId(long instanceId) {
+ Filter searchFilter = new Filter(NicVO.class, "deviceId", true, null, null);
+ SearchCriteria<Integer> sc = deviceIdSearch.create();
+ sc.setParameters("instance", instanceId);
+ List<Integer> deviceIds = customSearch(sc, searchFilter);
+
+ int freeDeviceId = 0;
+ for (int deviceId : deviceIds) {
--- End diff --
@ustcweizhou Could you elaborate on what the logic does?
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
Posted by remibergsma <gi...@git.apache.org>.
Github user remibergsma commented on the pull request:
https://github.com/apache/cloudstack/pull/1209#issuecomment-164174368
LGTM based on these tests:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=true \
component/test_password_server.py \
smoke/test_vpc_redundant.py \
smoke/test_routers_iptables_default_policy.py \
smoke/test_routers_network_ops.py \
smoke/test_vpc_router_nics.py \
smoke/test_router_dhcphosts.py \
smoke/test_loadbalance.py \
smoke/test_internal_lb.py \
smoke/test_ssvm.py \
smoke/test_vpc_vpn.py \
smoke/test_privategw_acl.py \
smoke/test_network.py
```
Result:
```
Check the password file in the Router VM ... === TestName: test_isolate_network_password_server | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and check default routes ... === TestName: test_02_redundant_VPC_default_routes | Status : SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network ... === TestName: test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName: test_03_RVR_Network_check_router_state | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === TestName: test_router_dhcphosts | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName: test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName: test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName: test_assign_and_removal_lb | Status : SUCCESS ===
ok
Test to verify access to loadbalancer haproxy admin stats page ... === TestName: test02_internallb_haproxy_stats_on_all_interfaces | Status : SUCCESS ===
ok
Test create, assign, remove of an Internal LB with roundrobin http traffic to 3 vm's ... === TestName: test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
ok
Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : SUCCESS ===
ok
Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : SUCCESS ===
ok
Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
ok
Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
ok
Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS ===
ok
Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS ===
ok
Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS ===
ok
Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS ===
ok
Test Remote Access VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS ===
ok
test_01_vpc_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_01_vpc_privategw_acl | Status : SUCCESS ===
ok
test_02_vpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_02_vpc_privategw_static_routes | Status : SUCCESS ===
ok
test_03_rvpc_privategw_static_routes (integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: test_03_rvpc_privategw_static_routes | Status : SUCCESS ===
ok
Test for port forwarding on source NAT ... === TestName: test_01_port_fwd_on_src_nat | Status : SUCCESS ===
ok
Test for port forwarding on non source NAT ... === TestName: test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
ok
Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS ===
ok
Test for Router rules for network rules on acquired public IP ... === TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 38 tests in 19722.163s
OK
```
And:
```
nosetests --with-marvin --marvin-config=${marvinCfg} -s -a tags=advanced,required_hardware=false \
smoke/test_routers.py \
smoke/test_network_acl.py \
smoke/test_reset_vm_on_reboot.py \
smoke/test_vm_life_cycle.py \
smoke/test_service_offerings.py \
smoke/test_network.py \
component/test_vpc_offerings.py \
component/test_vpc_routers.py
```
Result:
```
Test router internal advanced zone ... === TestName: test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup | Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status : SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced | Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS ===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS ===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName: test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | Status : SUCCESS ===
ok
Test to create service offering ... === TestName: test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName: test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName: test_03_delete_service_offering | Status : SUCCESS ===
ok
Test for delete account ... === TestName: test_delete_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for admin account ... === TestName: test_public_ip_admin_account | Status : SUCCESS ===
ok
Test for Associate/Disassociate public IP address for user account ... === TestName: test_public_ip_user_account | Status : SUCCESS ===
ok
Test for release public IP address ... === TestName: test_releaseIP | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering | Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName: test_03_vpc_off_without_lb | Status : SUCCESS ===
ok
Test VPC offering without static NAT service ... === TestName: test_04_vpc_off_without_static_nat | Status : SUCCESS ===
ok
Test VPC offering without port forwarding service ... === TestName: test_05_vpc_off_without_pf | Status : SUCCESS ===
ok
Test VPC offering with invalid services ... === TestName: test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : SUCCESS ===
ok
test_09_create_redundant_vpc_offering (integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... === TestName: test_01_start_stop_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName: test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest network ... === TestName: test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test destroy of router after addition of one guest network ... === TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName: test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName: test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName: test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName: test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 41 tests in 8554.857s
OK
```
Didn't test the actual feature/fix.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
Posted by ustcweizhou <gi...@git.apache.org>.
Github user ustcweizhou commented on a diff in the pull request:
https://github.com/apache/cloudstack/pull/1209#discussion_r47437641
--- Diff: engine/schema/src/com/cloud/vm/dao/NicDaoImpl.java ---
@@ -222,11 +222,20 @@ public String getIpAddress(long networkId, long instanceId) {
}
@Override
- public int countNics(long instanceId) {
- SearchCriteria<Integer> sc = CountBy.create();
- sc.setParameters("vmId", instanceId);
- List<Integer> results = customSearch(sc, null);
- return results.get(0);
+ public int getFreeDeviceId(long instanceId) {
+ Filter searchFilter = new Filter(NicVO.class, "deviceId", true, null, null);
+ SearchCriteria<Integer> sc = deviceIdSearch.create();
+ sc.setParameters("instance", instanceId);
+ List<Integer> deviceIds = customSearch(sc, searchFilter);
+
+ int freeDeviceId = 0;
+ for (int deviceId : deviceIds) {
--- End diff --
@borisroman
we get the list of deviceId order by asc at first, eg, 0,1,2,4
then we check the list, for index i, if (deviceIds[i] != i), then i is the first free ip.
in my example, the first free device_id is 3 (because deviceIds[3] = 4, not 3)
then we assign 3 as the device_id of new nic.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---
[GitHub] cloudstack pull request: CLOUDSTACK-9134: set device_id as the fir...
Posted by borisroman <gi...@git.apache.org>.
Github user borisroman commented on the pull request:
https://github.com/apache/cloudstack/pull/1209#issuecomment-164279515
LGTM :+1:
Based on code-review and @remibergsma tests.
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastructure@apache.org or file a JIRA ticket
with INFRA.
---