You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@activemq.apache.org by ms...@apache.org on 2015/07/25 17:50:22 UTC
[3/3] activemq git commit: renamed bin/diag to bin/activemq-diag
renamed bin/diag to bin/activemq-diag
This prevents ambiguities in the unix PATH environment variable.
Project: http://git-wip-us.apache.org/repos/asf/activemq/repo
Commit: http://git-wip-us.apache.org/repos/asf/activemq/commit/eb8723c1
Tree: http://git-wip-us.apache.org/repos/asf/activemq/tree/eb8723c1
Diff: http://git-wip-us.apache.org/repos/asf/activemq/diff/eb8723c1
Branch: refs/heads/master
Commit: eb8723c1e9f8de350cc8974c0a9fcb1b68caf26e
Parents: 7d30b5c
Author: Marc Schoechlin <ma...@breuninger.de>
Authored: Sat Jul 25 17:43:07 2015 +0200
Committer: Marc Schoechlin <ma...@breuninger.de>
Committed: Sat Jul 25 17:43:07 2015 +0200
----------------------------------------------------------------------
assembly/src/release/bin/activemq-diag | 236 ++++++++++++++++++++++++++++
assembly/src/release/bin/diag | 236 ----------------------------
2 files changed, 236 insertions(+), 236 deletions(-)
----------------------------------------------------------------------
http://git-wip-us.apache.org/repos/asf/activemq/blob/eb8723c1/assembly/src/release/bin/activemq-diag
----------------------------------------------------------------------
diff --git a/assembly/src/release/bin/activemq-diag b/assembly/src/release/bin/activemq-diag
new file mode 100755
index 0000000..e834df7
--- /dev/null
+++ b/assembly/src/release/bin/activemq-diag
@@ -0,0 +1,236 @@
+#!/bin/sh
+# ------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ------------------------------------------------------------------------
+#
+## diag.sh - a script to run diagnostic commands and save output to a log file
+#
+# Author: Cal Lott <ca...@ihg.com>
+#
+PATH=$PATH:$HOME/bin:/bin/:/usr/bin:/sbin:/usr/sbin
+
+# Set a script name string for later use.
+SCRIPT_NAME=`basename $0`
+ORIGINAL_COMMAND_LINE="$0 $*"
+LOCALHOST=`uname -n | awk -F. '{print $1}'`
+
+# Declare some functions.
+
+# Prints argument to stdout, prepended with "[YYYYMMDD-HH:MM:SS]".
+dateprint() {
+ echo "[`date +%Y%m%d-%H:%M:%S`] $*"
+}
+
+# Runs argument list as a single shell command.
+BAR_SEPARATOR='------------------------------------------------'
+run() {
+ echo
+ echo $BAR_SEPARATOR
+ dateprint "START: $*"
+ executable=`echo $* | awk '{print $1}'`
+ dateprint "path to executable: `which $executable 2>/dev/null`"
+ $*
+ last_exit_code=$?
+ cumulative_exit_code=`expr $cumulative_exit_code + $last_exit_code`
+ dateprint "exit $last_exit_code"
+ dateprint "END: $*"
+ echo $BAR_SEPARATOR
+ echo
+}
+
+# Print usage information.
+usage() {
+ cat << EOF
+
+$SCRIPT_NAME - run a set of standard diagnostic commands
+
+Usage: $SCRIPT_NAME [-l logfile] [-jz] [-hv] <pid1> <pid2> ... <pidN>
+
+This script runs several diagnostic commands on the local system and saves the
+output to a gzipped log file. You may also specify an optional list of pids,
+which will cause additional diagnostic commands (lsoft, jstat, etc.) to be run
+against those specific processes only.
+
+The default path for the datestamped log file is as follows:
+
+ \$HOME/log/$SCRIPT_NAME.\$LOCALHOST.YYYYMMDD-HHMMSS.log
+
+You can override the default file name with the -l option. (See below.)
+
+
+Options:
+-j Also process any pids listed in output of "jps" command.
+-l <logfile> Use specified log file instead of default.
+-z Do not gzip log file.
+
+Other Options:
+-h Print this message and exit.
+
+EOF
+}
+
+# Print help information.
+help() {
+ usage
+}
+
+# Command line options processing.
+while getopts "hjl:vz" OPTION
+do
+ case $OPTION in
+ h)
+ help
+ exit 0
+ ;;
+ j)
+ USE_JPS='TRUE'
+ ;;
+ l)
+ LOGFILE=$OPTARG
+ ;;
+ z)
+ COMPRESSION_OPTION='DISABLED'
+ ;;
+ ?)
+ usage
+ exit 1
+ ;;
+ esac
+done
+shift `expr $OPTIND - 1` # remove processed arguments from $*
+PIDLIST=$* # save list of remaining args as pidlist
+
+# If requested, use jps to get an additional list of java pids.
+if [ "$USE_JPS" = 'TRUE' ]
+then
+ # Save the current list of pids.
+ arg_pids=$PIDLIST
+ # Use jps to grab additional java pids, filtering the jps pid itself.
+ jps_pids=`jps 2>/dev/null | awk '$2 !~ /^Jps/ {print $1}'`
+ # Now obtain an unique sorted list of pids from both groups.
+ PIDLIST=`echo $arg_pids $jps_pids | sort | uniq`
+fi
+
+# Use the default logfile if the user did not specify one.
+if [ "$LOGFILE" = '' ]
+then
+ LOGFILE="$HOME/log/$SCRIPT_NAME.$LOCALHOST.`date +%Y%m%d-%H%M%S`.log"
+fi
+# Create log directory if it does not already exist
+mkdir `dirname $LOGFILE` >/dev/null 2>&1
+
+# Print start message to stdout.
+dateprint "BEGIN - running diagnostics for host: `uname -n`"
+
+# Complain and die if we cannot create the logfile.
+touch $LOGFILE >/dev/null 2>&1
+if [ $? -eq 0 ]
+then
+ dateprint "logfile created, running diagnostic commands . . ."
+else
+ dateprint "ERROR: cannot create $LOGFILE, exiting!"
+ exit 1
+fi
+
+# Save stdout and stderr descriptors and redirect output to logfile.
+exec 6>&1 # Link file descriptor 6 with stdout (saves stdout)
+exec 7>&2 # Link file descriptor 7 with stderr (saves stderr)
+exec >$LOGFILE 2>&1 # Redirect stdout and stdin to logfile
+
+##
+## Begin diagnostic output
+##
+dateprint "BEGIN DIAGNOSTIC OUTPUT"
+dateprint "running on host: `uname -n`"
+dateprint "unprocessed command line: \"$ORIGINAL_COMMAND_LINE\""
+dateprint "after options processing: \"$0 $PIDLIST > $LOGFILE\""
+
+# Each of the following shell commands will be run once.
+for cmd in \
+ "crontab -l" \
+ "id" \
+ "ifconfig -a" \
+ "df -kl" \
+ "env" \
+ "iostat -x" \
+ "jps -v" \
+ "netstat -anp" \
+ "netstat -r" \
+ "ps -ef" \
+ "sar -A" \
+ "ulimit -a" \
+ "uname -a" \
+ "uptime" \
+ "w" \
+; do
+ run $cmd
+done
+
+# As above, but these commands are customized for a specific flavor of Unix.
+OS=`uname -s`
+case $OS in
+ Linux)
+ for cmd in \
+ "swapon -s" \
+ "top -b -n1" \
+ ; do
+ run $cmd
+ done
+ ;;
+ SunOS)
+ for cmd in \
+ "swap -s" \
+ "top -b -d1" \
+ ; do
+ run $cmd
+ done
+ ;;
+ *)
+ dateprint "WARNING: OS \"$OS\" unknown - running no OS-specific commands"
+ ;;
+esac
+
+# Each of these commands are run once per each pid argument
+for pid in $PIDLIST
+do
+ for cmd in \
+ "lsof -p $pid" \
+ "jstat -gcutil $pid" \
+ "jstack -l $pid" \
+ ; do
+ run $cmd
+ done
+done
+
+dateprint "END DIAGNOSTIC OUTPUT"
+dateprint "cumulative exit code: $cumulative_exit_code"
+
+exec 1>&6 6>&- # Restore stdout and close file descriptor 6.
+exec 2>&7 7>&- # Restore stderr and close file descriptor 7.
+##
+## End diagnostic output
+##
+
+# Compress the logfile if requested and end script execution
+if [ "$COMPRESSION_OPTION" = 'DISABLED' ]
+then
+ dateprint "FINISH - output stored at: $LOGFILE"
+else
+ nohup gzip $LOGFILE >/dev/null 2>&1 &
+ dateprint "FINISH - output stored at: $LOGFILE.gz"
+fi
+
+exit $cumulative_exit_code
http://git-wip-us.apache.org/repos/asf/activemq/blob/eb8723c1/assembly/src/release/bin/diag
----------------------------------------------------------------------
diff --git a/assembly/src/release/bin/diag b/assembly/src/release/bin/diag
deleted file mode 100755
index e834df7..0000000
--- a/assembly/src/release/bin/diag
+++ /dev/null
@@ -1,236 +0,0 @@
-#!/bin/sh
-# ------------------------------------------------------------------------
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements. See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ------------------------------------------------------------------------
-#
-## diag.sh - a script to run diagnostic commands and save output to a log file
-#
-# Author: Cal Lott <ca...@ihg.com>
-#
-PATH=$PATH:$HOME/bin:/bin/:/usr/bin:/sbin:/usr/sbin
-
-# Set a script name string for later use.
-SCRIPT_NAME=`basename $0`
-ORIGINAL_COMMAND_LINE="$0 $*"
-LOCALHOST=`uname -n | awk -F. '{print $1}'`
-
-# Declare some functions.
-
-# Prints argument to stdout, prepended with "[YYYYMMDD-HH:MM:SS]".
-dateprint() {
- echo "[`date +%Y%m%d-%H:%M:%S`] $*"
-}
-
-# Runs argument list as a single shell command.
-BAR_SEPARATOR='------------------------------------------------'
-run() {
- echo
- echo $BAR_SEPARATOR
- dateprint "START: $*"
- executable=`echo $* | awk '{print $1}'`
- dateprint "path to executable: `which $executable 2>/dev/null`"
- $*
- last_exit_code=$?
- cumulative_exit_code=`expr $cumulative_exit_code + $last_exit_code`
- dateprint "exit $last_exit_code"
- dateprint "END: $*"
- echo $BAR_SEPARATOR
- echo
-}
-
-# Print usage information.
-usage() {
- cat << EOF
-
-$SCRIPT_NAME - run a set of standard diagnostic commands
-
-Usage: $SCRIPT_NAME [-l logfile] [-jz] [-hv] <pid1> <pid2> ... <pidN>
-
-This script runs several diagnostic commands on the local system and saves the
-output to a gzipped log file. You may also specify an optional list of pids,
-which will cause additional diagnostic commands (lsoft, jstat, etc.) to be run
-against those specific processes only.
-
-The default path for the datestamped log file is as follows:
-
- \$HOME/log/$SCRIPT_NAME.\$LOCALHOST.YYYYMMDD-HHMMSS.log
-
-You can override the default file name with the -l option. (See below.)
-
-
-Options:
--j Also process any pids listed in output of "jps" command.
--l <logfile> Use specified log file instead of default.
--z Do not gzip log file.
-
-Other Options:
--h Print this message and exit.
-
-EOF
-}
-
-# Print help information.
-help() {
- usage
-}
-
-# Command line options processing.
-while getopts "hjl:vz" OPTION
-do
- case $OPTION in
- h)
- help
- exit 0
- ;;
- j)
- USE_JPS='TRUE'
- ;;
- l)
- LOGFILE=$OPTARG
- ;;
- z)
- COMPRESSION_OPTION='DISABLED'
- ;;
- ?)
- usage
- exit 1
- ;;
- esac
-done
-shift `expr $OPTIND - 1` # remove processed arguments from $*
-PIDLIST=$* # save list of remaining args as pidlist
-
-# If requested, use jps to get an additional list of java pids.
-if [ "$USE_JPS" = 'TRUE' ]
-then
- # Save the current list of pids.
- arg_pids=$PIDLIST
- # Use jps to grab additional java pids, filtering the jps pid itself.
- jps_pids=`jps 2>/dev/null | awk '$2 !~ /^Jps/ {print $1}'`
- # Now obtain an unique sorted list of pids from both groups.
- PIDLIST=`echo $arg_pids $jps_pids | sort | uniq`
-fi
-
-# Use the default logfile if the user did not specify one.
-if [ "$LOGFILE" = '' ]
-then
- LOGFILE="$HOME/log/$SCRIPT_NAME.$LOCALHOST.`date +%Y%m%d-%H%M%S`.log"
-fi
-# Create log directory if it does not already exist
-mkdir `dirname $LOGFILE` >/dev/null 2>&1
-
-# Print start message to stdout.
-dateprint "BEGIN - running diagnostics for host: `uname -n`"
-
-# Complain and die if we cannot create the logfile.
-touch $LOGFILE >/dev/null 2>&1
-if [ $? -eq 0 ]
-then
- dateprint "logfile created, running diagnostic commands . . ."
-else
- dateprint "ERROR: cannot create $LOGFILE, exiting!"
- exit 1
-fi
-
-# Save stdout and stderr descriptors and redirect output to logfile.
-exec 6>&1 # Link file descriptor 6 with stdout (saves stdout)
-exec 7>&2 # Link file descriptor 7 with stderr (saves stderr)
-exec >$LOGFILE 2>&1 # Redirect stdout and stdin to logfile
-
-##
-## Begin diagnostic output
-##
-dateprint "BEGIN DIAGNOSTIC OUTPUT"
-dateprint "running on host: `uname -n`"
-dateprint "unprocessed command line: \"$ORIGINAL_COMMAND_LINE\""
-dateprint "after options processing: \"$0 $PIDLIST > $LOGFILE\""
-
-# Each of the following shell commands will be run once.
-for cmd in \
- "crontab -l" \
- "id" \
- "ifconfig -a" \
- "df -kl" \
- "env" \
- "iostat -x" \
- "jps -v" \
- "netstat -anp" \
- "netstat -r" \
- "ps -ef" \
- "sar -A" \
- "ulimit -a" \
- "uname -a" \
- "uptime" \
- "w" \
-; do
- run $cmd
-done
-
-# As above, but these commands are customized for a specific flavor of Unix.
-OS=`uname -s`
-case $OS in
- Linux)
- for cmd in \
- "swapon -s" \
- "top -b -n1" \
- ; do
- run $cmd
- done
- ;;
- SunOS)
- for cmd in \
- "swap -s" \
- "top -b -d1" \
- ; do
- run $cmd
- done
- ;;
- *)
- dateprint "WARNING: OS \"$OS\" unknown - running no OS-specific commands"
- ;;
-esac
-
-# Each of these commands are run once per each pid argument
-for pid in $PIDLIST
-do
- for cmd in \
- "lsof -p $pid" \
- "jstat -gcutil $pid" \
- "jstack -l $pid" \
- ; do
- run $cmd
- done
-done
-
-dateprint "END DIAGNOSTIC OUTPUT"
-dateprint "cumulative exit code: $cumulative_exit_code"
-
-exec 1>&6 6>&- # Restore stdout and close file descriptor 6.
-exec 2>&7 7>&- # Restore stderr and close file descriptor 7.
-##
-## End diagnostic output
-##
-
-# Compress the logfile if requested and end script execution
-if [ "$COMPRESSION_OPTION" = 'DISABLED' ]
-then
- dateprint "FINISH - output stored at: $LOGFILE"
-else
- nohup gzip $LOGFILE >/dev/null 2>&1 &
- dateprint "FINISH - output stored at: $LOGFILE.gz"
-fi
-
-exit $cumulative_exit_code