You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@jmeter.apache.org by "Khan, Sadat A" <Sa...@altisource.com> on 2015/06/25 12:38:29 UTC
assertion results in log
hello,
I am running my test plan through command line. I have a response and duration assertion in my test plan to detect timeouts and validity of pages being rendered. However , as is known, assertions keep waiting for the test to complete rather than actually "enforce" the timeout.
1./ In the above case , how can I get the assertion to write some kind of indicative output to a log file ? This log can be parsed for detecting issues.
2./ slightly off topic - in the csv that is generated from a test result run , I have a column called "elapsed". Will that be the column I would like at if I wanted to get the response time for the particular action ?
thanks
Sadat Ali Khan
***********************************************************************************************************************
This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
***********************************************************************************************************************
Re: assertion results in log
Posted by "Khan, Sadat A" <Sa...@altisource.com>.
leaving the enforcing part for nowŠ rather using assertions and parsing
the sampler log , separately.
On 6/30/15 9:18 PM, "Deepak Shetty" <sh...@gmail.com> wrote:
>> the timeout in the sampler is for each request
>yes it is inactivity
>>In my caserequest goes to the server in many small chunks and thus
>enforcing T/O through the sampler would not work.
>Short of writing your own sampler , I don't see a way to do what you want
>in JMeter.
>
>On Mon, Jun 29, 2015 at 4:27 PM, Khan, Sadat A <Sa...@altisource.com>
>wrote:
>
>> If I understand correctly , the timeout in the sampler is for each
>>request
>> and not the whole http message
>> In my caserequest goes to the server in many small chunks and thus
>> enforcing T/O through the sampler would not work.
>>
>>
>> On 6/29/15 11:11 PM, "Deepak Shetty" <sh...@gmail.com> wrote:
>>
>> >>However , as is known, assertions keep waiting for the test to
>>complete
>> >rather than actually "enforce" the timeout.
>> >If you want the sampler to fail (timeout to be "enforced" - then
>>specify
>> >the timeout as part of the Connect/response timeout (assuming you are
>> >using
>> >the HTTP Sampler)
>> >
>> >On Thu, Jun 25, 2015 at 3:38 AM, Khan, Sadat A
>><Sadat.Khan@altisource.com
>> >
>> >wrote:
>> >
>> >> hello,
>> >> I am running my test plan through command line. I have a
>> >> response and duration assertion in my test plan to detect timeouts
>>and
>> >> validity of pages being rendered. However , as is known, assertions
>>keep
>> >> waiting for the test to complete rather than actually "enforce" the
>> >>timeout.
>> >>
>> >> 1./ In the above case , how can I get the assertion to write some
>>kind
>> >>of
>> >> indicative output to a log file ? This log can be parsed for
>>detecting
>> >> issues.
>> >>
>> >> 2./ slightly off topic - in the csv that is generated from a test
>>result
>> >> run , I have a column called "elapsed". Will that be the column I
>>would
>> >> like at if I wanted to get the response time for the particular
>>action ?
>> >>
>> >> thanks
>> >>
>> >> Sadat Ali Khan
>> >>
>> >>
>> >>
>>
>>>>***********************************************************************
>>>>**
>> >>**********************************************
>> >>
>> >> This email message and any attachments are intended solely for the
>>use
>> >>of
>> >> the addressee. If you are not the intended recipient, you are
>>prohibited
>> >> from reading, disclosing, reproducing, distributing, disseminating or
>> >> otherwise using this transmission. If you have received this message
>>in
>> >> error, please promptly notify the sender by reply email and
>>immediately
>> >> delete this message from your system. This message and any
>>attachments
>> >>may
>> >> contain information that is confidential, privileged or exempt from
>> >> disclosure. Delivery of this message to any person other than the
>> >>intended
>> >> recipient is not intended to waive any right or privilege. Message
>> >> transmission is not guaranteed to be secure or free of software
>>viruses.
>> >>
>> >>
>>
>>>>***********************************************************************
>>>>**
>> >>**********************************************
>>
>>
>>
>>*************************************************************************
>>**********************************************
>>
>> This email message and any attachments are intended solely for the use
>>of
>> the addressee. If you are not the intended recipient, you are prohibited
>> from reading, disclosing, reproducing, distributing, disseminating or
>> otherwise using this transmission. If you have received this message in
>> error, please promptly notify the sender by reply email and immediately
>> delete this message from your system. This message and any attachments
>>may
>> contain information that is confidential, privileged or exempt from
>> disclosure. Delivery of this message to any person other than the
>>intended
>> recipient is not intended to waive any right or privilege. Message
>> transmission is not guaranteed to be secure or free of software viruses.
>>
>>
>>*************************************************************************
>>**********************************************
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
>> For additional commands, e-mail: user-help@jmeter.apache.org
>>
>>
***********************************************************************************************************************
This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
***********************************************************************************************************************
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: assertion results in log
Posted by Deepak Shetty <sh...@gmail.com>.
> the timeout in the sampler is for each request
yes it is inactivity
>In my caserequest goes to the server in many small chunks and thus
enforcing T/O through the sampler would not work.
Short of writing your own sampler , I don't see a way to do what you want
in JMeter.
On Mon, Jun 29, 2015 at 4:27 PM, Khan, Sadat A <Sa...@altisource.com>
wrote:
> If I understand correctly , the timeout in the sampler is for each request
> and not the whole http message
> In my caserequest goes to the server in many small chunks and thus
> enforcing T/O through the sampler would not work.
>
>
> On 6/29/15 11:11 PM, "Deepak Shetty" <sh...@gmail.com> wrote:
>
> >>However , as is known, assertions keep waiting for the test to complete
> >rather than actually "enforce" the timeout.
> >If you want the sampler to fail (timeout to be "enforced" - then specify
> >the timeout as part of the Connect/response timeout (assuming you are
> >using
> >the HTTP Sampler)
> >
> >On Thu, Jun 25, 2015 at 3:38 AM, Khan, Sadat A <Sadat.Khan@altisource.com
> >
> >wrote:
> >
> >> hello,
> >> I am running my test plan through command line. I have a
> >> response and duration assertion in my test plan to detect timeouts and
> >> validity of pages being rendered. However , as is known, assertions keep
> >> waiting for the test to complete rather than actually "enforce" the
> >>timeout.
> >>
> >> 1./ In the above case , how can I get the assertion to write some kind
> >>of
> >> indicative output to a log file ? This log can be parsed for detecting
> >> issues.
> >>
> >> 2./ slightly off topic - in the csv that is generated from a test result
> >> run , I have a column called "elapsed". Will that be the column I would
> >> like at if I wanted to get the response time for the particular action ?
> >>
> >> thanks
> >>
> >> Sadat Ali Khan
> >>
> >>
> >>
> >>*************************************************************************
> >>**********************************************
> >>
> >> This email message and any attachments are intended solely for the use
> >>of
> >> the addressee. If you are not the intended recipient, you are prohibited
> >> from reading, disclosing, reproducing, distributing, disseminating or
> >> otherwise using this transmission. If you have received this message in
> >> error, please promptly notify the sender by reply email and immediately
> >> delete this message from your system. This message and any attachments
> >>may
> >> contain information that is confidential, privileged or exempt from
> >> disclosure. Delivery of this message to any person other than the
> >>intended
> >> recipient is not intended to waive any right or privilege. Message
> >> transmission is not guaranteed to be secure or free of software viruses.
> >>
> >>
> >>*************************************************************************
> >>**********************************************
>
>
> ***********************************************************************************************************************
>
> This email message and any attachments are intended solely for the use of
> the addressee. If you are not the intended recipient, you are prohibited
> from reading, disclosing, reproducing, distributing, disseminating or
> otherwise using this transmission. If you have received this message in
> error, please promptly notify the sender by reply email and immediately
> delete this message from your system. This message and any attachments may
> contain information that is confidential, privileged or exempt from
> disclosure. Delivery of this message to any person other than the intended
> recipient is not intended to waive any right or privilege. Message
> transmission is not guaranteed to be secure or free of software viruses.
>
> ***********************************************************************************************************************
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> For additional commands, e-mail: user-help@jmeter.apache.org
>
>
Re: assertion results in log
Posted by "Khan, Sadat A" <Sa...@altisource.com>.
If I understand correctly , the timeout in the sampler is for each request
and not the whole http message
In my caserequest goes to the server in many small chunks and thus
enforcing T/O through the sampler would not work.
On 6/29/15 11:11 PM, "Deepak Shetty" <sh...@gmail.com> wrote:
>>However , as is known, assertions keep waiting for the test to complete
>rather than actually "enforce" the timeout.
>If you want the sampler to fail (timeout to be "enforced" - then specify
>the timeout as part of the Connect/response timeout (assuming you are
>using
>the HTTP Sampler)
>
>On Thu, Jun 25, 2015 at 3:38 AM, Khan, Sadat A <Sa...@altisource.com>
>wrote:
>
>> hello,
>> I am running my test plan through command line. I have a
>> response and duration assertion in my test plan to detect timeouts and
>> validity of pages being rendered. However , as is known, assertions keep
>> waiting for the test to complete rather than actually "enforce" the
>>timeout.
>>
>> 1./ In the above case , how can I get the assertion to write some kind
>>of
>> indicative output to a log file ? This log can be parsed for detecting
>> issues.
>>
>> 2./ slightly off topic - in the csv that is generated from a test result
>> run , I have a column called "elapsed". Will that be the column I would
>> like at if I wanted to get the response time for the particular action ?
>>
>> thanks
>>
>> Sadat Ali Khan
>>
>>
>>
>>*************************************************************************
>>**********************************************
>>
>> This email message and any attachments are intended solely for the use
>>of
>> the addressee. If you are not the intended recipient, you are prohibited
>> from reading, disclosing, reproducing, distributing, disseminating or
>> otherwise using this transmission. If you have received this message in
>> error, please promptly notify the sender by reply email and immediately
>> delete this message from your system. This message and any attachments
>>may
>> contain information that is confidential, privileged or exempt from
>> disclosure. Delivery of this message to any person other than the
>>intended
>> recipient is not intended to waive any right or privilege. Message
>> transmission is not guaranteed to be secure or free of software viruses.
>>
>>
>>*************************************************************************
>>**********************************************
***********************************************************************************************************************
This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
***********************************************************************************************************************
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: assertion results in log
Posted by Deepak Shetty <sh...@gmail.com>.
>However , as is known, assertions keep waiting for the test to complete
rather than actually "enforce" the timeout.
If you want the sampler to fail (timeout to be "enforced" - then specify
the timeout as part of the Connect/response timeout (assuming you are using
the HTTP Sampler)
On Thu, Jun 25, 2015 at 3:38 AM, Khan, Sadat A <Sa...@altisource.com>
wrote:
> hello,
> I am running my test plan through command line. I have a
> response and duration assertion in my test plan to detect timeouts and
> validity of pages being rendered. However , as is known, assertions keep
> waiting for the test to complete rather than actually "enforce" the timeout.
>
> 1./ In the above case , how can I get the assertion to write some kind of
> indicative output to a log file ? This log can be parsed for detecting
> issues.
>
> 2./ slightly off topic - in the csv that is generated from a test result
> run , I have a column called "elapsed". Will that be the column I would
> like at if I wanted to get the response time for the particular action ?
>
> thanks
>
> Sadat Ali Khan
>
>
> ***********************************************************************************************************************
>
> This email message and any attachments are intended solely for the use of
> the addressee. If you are not the intended recipient, you are prohibited
> from reading, disclosing, reproducing, distributing, disseminating or
> otherwise using this transmission. If you have received this message in
> error, please promptly notify the sender by reply email and immediately
> delete this message from your system. This message and any attachments may
> contain information that is confidential, privileged or exempt from
> disclosure. Delivery of this message to any person other than the intended
> recipient is not intended to waive any right or privilege. Message
> transmission is not guaranteed to be secure or free of software viruses.
>
> ***********************************************************************************************************************
>
Re: assertion results in log
Posted by "Khan, Sadat A" <Sa...@altisource.com>.
anything on this please ?
regards
Sadat Ali Khan
On 6/25/15 4:08 PM, "Khan, Sadat A" <Sa...@altisource.com> wrote:
>hello,
> I am running my test plan through command line. I have a
>response and duration assertion in my test plan to detect timeouts and
>validity of pages being rendered. However , as is known, assertions keep
>waiting for the test to complete rather than actually "enforce" the
>timeout.
>
>1./ In the above case , how can I get the assertion to write some kind of
>indicative output to a log file ? This log can be parsed for detecting
>issues.
>
>2./ slightly off topic - in the csv that is generated from a test result
>run , I have a column called "elapsed". Will that be the column I would
>like at if I wanted to get the response time for the particular action ?
>
>thanks
>
>Sadat Ali Khan
>
>**************************************************************************
>*********************************************
>
>This email message and any attachments are intended solely for the use of
>the addressee. If you are not the intended recipient, you are prohibited
>from reading, disclosing, reproducing, distributing, disseminating or
>otherwise using this transmission. If you have received this message in
>error, please promptly notify the sender by reply email and immediately
>delete this message from your system. This message and any attachments
>may contain information that is confidential, privileged or exempt from
>disclosure. Delivery of this message to any person other than the
>intended recipient is not intended to waive any right or privilege.
>Message transmission is not guaranteed to be secure or free of software
>viruses.
>**************************************************************************
>*********************************************
***********************************************************************************************************************
This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
***********************************************************************************************************************
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: assertion results in log
Posted by "Khan, Sadat A" <Sa...@altisource.com>.
so if I run my test in non-GUI mode , will it be the log specified with
the -l flag ?
Also do I need to turn up log level to get assertion output ?
On 6/29/15 11:06 PM, "sebb" <se...@gmail.com> wrote:
>On 25 June 2015 at 11:38, Khan, Sadat A <Sa...@altisource.com> wrote:
>> hello,
>> I am running my test plan through command line. I have a
>>response and duration assertion in my test plan to detect timeouts and
>>validity of pages being rendered. However , as is known, assertions keep
>>waiting for the test to complete rather than actually "enforce" the
>>timeout.
>>
>> 1./ In the above case , how can I get the assertion to write some kind
>>of indicative output to a log file ? This log can be parsed for
>>detecting issues.
>
>Which log file?
>
>If an Assertion fails, then the sample result log file will show the
>status as failed.
>
>> 2./ slightly off topic - in the csv that is generated from a test
>>result run , I have a column called "elapsed". Will that be the column I
>>would like at if I wanted to get the response time for the particular
>>action ?
>
>Use a separate e-mail (with new subject) for each new topic.
>
>> thanks
>>
>> Sadat Ali Khan
>>
>>
>>*************************************************************************
>>**********************************************
>>
>> This email message and any attachments are intended solely for the use
>>of the addressee. If you are not the intended recipient, you are
>>prohibited from reading, disclosing, reproducing, distributing,
>>disseminating or otherwise using this transmission. If you have received
>>this message in error, please promptly notify the sender by reply email
>>and immediately delete this message from your system. This message and
>>any attachments may contain information that is confidential, privileged
>>or exempt from disclosure. Delivery of this message to any person other
>>than the intended recipient is not intended to waive any right or
>>privilege. Message transmission is not guaranteed to be secure or free
>>of software viruses.
>>
>>*************************************************************************
>>**********************************************
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
>For additional commands, e-mail: user-help@jmeter.apache.org
>
***********************************************************************************************************************
This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
***********************************************************************************************************************
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org
Re: assertion results in log
Posted by sebb <se...@gmail.com>.
On 25 June 2015 at 11:38, Khan, Sadat A <Sa...@altisource.com> wrote:
> hello,
> I am running my test plan through command line. I have a response and duration assertion in my test plan to detect timeouts and validity of pages being rendered. However , as is known, assertions keep waiting for the test to complete rather than actually "enforce" the timeout.
>
> 1./ In the above case , how can I get the assertion to write some kind of indicative output to a log file ? This log can be parsed for detecting issues.
Which log file?
If an Assertion fails, then the sample result log file will show the
status as failed.
> 2./ slightly off topic - in the csv that is generated from a test result run , I have a column called "elapsed". Will that be the column I would like at if I wanted to get the response time for the particular action ?
Use a separate e-mail (with new subject) for each new topic.
> thanks
>
> Sadat Ali Khan
>
> ***********************************************************************************************************************
>
> This email message and any attachments are intended solely for the use of the addressee. If you are not the intended recipient, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply email and immediately delete this message from your system. This message and any attachments may contain information that is confidential, privileged or exempt from disclosure. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. Message transmission is not guaranteed to be secure or free of software viruses.
> ***********************************************************************************************************************
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
For additional commands, e-mail: user-help@jmeter.apache.org