You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@harmony.apache.org by Alexei Fedotov <al...@gmail.com> on 2007/06/14 11:43:37 UTC
[buildtest][harness] how to hide descriptors from .svn directories?
Hello buildtest infrastructure gurus,
I'm trying to run stress tests committed by Stepan into the common
buildtest infrastructure and get unexpected test launches:
[java] TestHarness:StoreRes add(): Test was run
stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
(PASSED)
I beleive descriptor copies which reside in .svn directories are
treated as normal descriptors. How should I configure TestFinder to
skip unwanted entries?
I've tried to look into sources and find there some exclusion
mechanism based on masks. Unfortunately I cannot figure how could I
pass a mask ".svn" to the test finder.
Thank you in advance for clarification.
On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
> Author: smishura
> Date: Sat Jun 9 03:29:18 2007
> New Revision: 545725
>
> URL: http://svn.apache.org/viewvc?view=rev&rev=545725
> Log:
> HARMONY-3536 ([testing] contribution of the Stress test suite) as from JIRA
>
>
> [This commit notification would consist of 193 parts,
> which exceeds the limit of 50 ones, so it was shortened to the summary.]
>
--
With best regards,
Alexei,
ESSD, Intel
Re: [buildtest][harness] how to hide descriptors from .svn directories?
Posted by Sean Qiu <se...@gmail.com>.
+1
I am interested in adding some new test suites for the BT.
2007/6/14, Tim Ellison <t....@gmail.com>:
> It would be good to get some documentation / instructions written down
> for the new build test infrastructure. It can be daunting to try and
> figure out what it does without an overview.
>
> I'd like to encourage the gurus to write some of their knowledge down.
>
> Regards,
> Tim
>
> Vladimir Ivanov wrote:
> > Yes, I found this too at today morning. It will be fixed in nearest
> > time by adding new option to harness.
> >
> > thanks, Vladimir
> >
> > On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
> >> Hello buildtest infrastructure gurus,
> >>
> >> I'm trying to run stress tests committed by Stepan into the common
> >> buildtest infrastructure and get unexpected test launches:
> >>
> >> [java] TestHarness:StoreRes add(): Test was run
> >> stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
> >>
> >> (PASSED)
> >>
> >> I beleive descriptor copies which reside in .svn directories are
> >> treated as normal descriptors. How should I configure TestFinder to
> >> skip unwanted entries?
> >>
> >> I've tried to look into sources and find there some exclusion
> >> mechanism based on masks. Unfortunately I cannot figure how could I
> >> pass a mask ".svn" to the test finder.
> >>
> >> Thank you in advance for clarification.
> >>
> >> On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
> >> > Author: smishura
> >> > Date: Sat Jun 9 03:29:18 2007
> >> > New Revision: 545725
> >> >
> >> > URL: http://svn.apache.org/viewvc?view=rev&rev=545725
> >> > Log:
> >> > HARMONY-3536 ([testing] contribution of the Stress test suite) as
> >> from JIRA
> >> >
> >> >
> >> > [This commit notification would consist of 193 parts,
> >> > which exceeds the limit of 50 ones, so it was shortened to the
> >> summary.]
> >> >
> >>
> >>
> >> --
> >> With best regards,
> >> Alexei,
> >> ESSD, Intel
> >>
> >
>
--
Sean Qiu
Re: [buildtest][harness] how to hide descriptors from .svn directories?
Posted by Tim Ellison <t....@gmail.com>.
It would be good to get some documentation / instructions written down
for the new build test infrastructure. It can be daunting to try and
figure out what it does without an overview.
I'd like to encourage the gurus to write some of their knowledge down.
Regards,
Tim
Vladimir Ivanov wrote:
> Yes, I found this too at today morning. It will be fixed in nearest
> time by adding new option to harness.
>
> thanks, Vladimir
>
> On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
>> Hello buildtest infrastructure gurus,
>>
>> I'm trying to run stress tests committed by Stepan into the common
>> buildtest infrastructure and get unexpected test launches:
>>
>> [java] TestHarness:StoreRes add(): Test was run
>> stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
>>
>> (PASSED)
>>
>> I beleive descriptor copies which reside in .svn directories are
>> treated as normal descriptors. How should I configure TestFinder to
>> skip unwanted entries?
>>
>> I've tried to look into sources and find there some exclusion
>> mechanism based on masks. Unfortunately I cannot figure how could I
>> pass a mask ".svn" to the test finder.
>>
>> Thank you in advance for clarification.
>>
>> On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
>> > Author: smishura
>> > Date: Sat Jun 9 03:29:18 2007
>> > New Revision: 545725
>> >
>> > URL: http://svn.apache.org/viewvc?view=rev&rev=545725
>> > Log:
>> > HARMONY-3536 ([testing] contribution of the Stress test suite) as
>> from JIRA
>> >
>> >
>> > [This commit notification would consist of 193 parts,
>> > which exceeds the limit of 50 ones, so it was shortened to the
>> summary.]
>> >
>>
>>
>> --
>> With best regards,
>> Alexei,
>> ESSD, Intel
>>
>
Re: [buildtest][harness] how to hide descriptors from .svn directories?
Posted by Alexei Fedotov <al...@gmail.com>.
Vladimir,
I've fixed a problem at
http://issues.apache.org/jira/browse/HARMONY-4168. Could you please
take a look?
+1 for Tim's comment on documentation
On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
> Vladimir,
> Thank you for a prompt reply. It's great that you want to fix this also.
>
> BTW, I'd looked for workaround and noticed that due to our exclude
> list design these lists couldn't be used to exclude duplicate
> descriptors since these descriptors had the same TestID inside.
>
> if (excludeTestNames.contains(test.getTestID())) {
> stoRes(test, "Test was excluded by exclude list");
> log.add(Level.CONFIG, methodLogPrefix + "The test "
> + test.getTestID() + " was excluded by exclude list");
> return false;
> }
>
>
> On 6/14/07, Vladimir Ivanov <iv...@gmail.com> wrote:
> > Yes, I found this too at today morning. It will be fixed in nearest
> > time by adding new option to harness.
> >
> > thanks, Vladimir
> >
> > On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
> > > Hello buildtest infrastructure gurus,
> > >
> > > I'm trying to run stress tests committed by Stepan into the common
> > > buildtest infrastructure and get unexpected test launches:
> > >
> > > [java] TestHarness:StoreRes add(): Test was run
> > > stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
> > > (PASSED)
> > >
> > > I beleive descriptor copies which reside in .svn directories are
> > > treated as normal descriptors. How should I configure TestFinder to
> > > skip unwanted entries?
> > >
> > > I've tried to look into sources and find there some exclusion
> > > mechanism based on masks. Unfortunately I cannot figure how could I
> > > pass a mask ".svn" to the test finder.
> > >
> > > Thank you in advance for clarification.
> > >
> > > On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
> > > > Author: smishura
> > > > Date: Sat Jun 9 03:29:18 2007
> > > > New Revision: 545725
> > > >
> > > > URL: http://svn.apache.org/viewvc?view=rev&rev=545725
> > > > Log:
> > > > HARMONY-3536 ([testing] contribution of the Stress test suite) as from JIRA
> > > >
> > > >
> > > > [This commit notification would consist of 193 parts,
> > > > which exceeds the limit of 50 ones, so it was shortened to the summary.]
> > > >
> > >
> > >
> > > --
> > > With best regards,
> > > Alexei,
> > > ESSD, Intel
> > >
> >
>
>
> --
> With best regards,
> Alexei,
> ESSD, Intel
>
--
With best regards,
Alexei,
ESSD, Intel
Re: [buildtest][harness] how to hide descriptors from .svn directories?
Posted by Alexei Fedotov <al...@gmail.com>.
Vladimir,
Thank you for a prompt reply. It's great that you want to fix this also.
BTW, I'd looked for workaround and noticed that due to our exclude
list design these lists couldn't be used to exclude duplicate
descriptors since these descriptors had the same TestID inside.
if (excludeTestNames.contains(test.getTestID())) {
stoRes(test, "Test was excluded by exclude list");
log.add(Level.CONFIG, methodLogPrefix + "The test "
+ test.getTestID() + " was excluded by exclude list");
return false;
}
On 6/14/07, Vladimir Ivanov <iv...@gmail.com> wrote:
> Yes, I found this too at today morning. It will be fixed in nearest
> time by adding new option to harness.
>
> thanks, Vladimir
>
> On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
> > Hello buildtest infrastructure gurus,
> >
> > I'm trying to run stress tests committed by Stepan into the common
> > buildtest infrastructure and get unexpected test launches:
> >
> > [java] TestHarness:StoreRes add(): Test was run
> > stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
> > (PASSED)
> >
> > I beleive descriptor copies which reside in .svn directories are
> > treated as normal descriptors. How should I configure TestFinder to
> > skip unwanted entries?
> >
> > I've tried to look into sources and find there some exclusion
> > mechanism based on masks. Unfortunately I cannot figure how could I
> > pass a mask ".svn" to the test finder.
> >
> > Thank you in advance for clarification.
> >
> > On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
> > > Author: smishura
> > > Date: Sat Jun 9 03:29:18 2007
> > > New Revision: 545725
> > >
> > > URL: http://svn.apache.org/viewvc?view=rev&rev=545725
> > > Log:
> > > HARMONY-3536 ([testing] contribution of the Stress test suite) as from JIRA
> > >
> > >
> > > [This commit notification would consist of 193 parts,
> > > which exceeds the limit of 50 ones, so it was shortened to the summary.]
> > >
> >
> >
> > --
> > With best regards,
> > Alexei,
> > ESSD, Intel
> >
>
--
With best regards,
Alexei,
ESSD, Intel
Re: [buildtest][harness] how to hide descriptors from .svn directories?
Posted by Vladimir Ivanov <iv...@gmail.com>.
Yes, I found this too at today morning. It will be fixed in nearest
time by adding new option to harness.
thanks, Vladimir
On 6/14/07, Alexei Fedotov <al...@gmail.com> wrote:
> Hello buildtest infrastructure gurus,
>
> I'm trying to run stress tests committed by Stepan into the common
> buildtest infrastructure and get unexpected test launches:
>
> [java] TestHarness:StoreRes add(): Test was run
> stress/org/apache/harmony/test/stress/classloader/NotSynchThreads/WrongClasses/.svn/text-base/testWCLoad1
> (PASSED)
>
> I beleive descriptor copies which reside in .svn directories are
> treated as normal descriptors. How should I configure TestFinder to
> skip unwanted entries?
>
> I've tried to look into sources and find there some exclusion
> mechanism based on masks. Unfortunately I cannot figure how could I
> pass a mask ".svn" to the test finder.
>
> Thank you in advance for clarification.
>
> On 6/9/07, smishura@apache.org <sm...@apache.org> wrote:
> > Author: smishura
> > Date: Sat Jun 9 03:29:18 2007
> > New Revision: 545725
> >
> > URL: http://svn.apache.org/viewvc?view=rev&rev=545725
> > Log:
> > HARMONY-3536 ([testing] contribution of the Stress test suite) as from JIRA
> >
> >
> > [This commit notification would consist of 193 parts,
> > which exceeds the limit of 50 ones, so it was shortened to the summary.]
> >
>
>
> --
> With best regards,
> Alexei,
> ESSD, Intel
>