You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@maven.apache.org by Jim McCaskey <ji...@pervasive.com> on 2011/12/12 20:19:40 UTC
skip cobertura for a module
Hello all,
I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
mvn install site:site findbugs:findbugs cobertura:cobertura
Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
Ideally I would just use a skip like this:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>cobertura-maven-plugin</artifactId>
<configuration>
<skip>true</skip>
</configuration>
</plugin>
But when I put that in, it still invokes cobertura. At least I see it say this:
[INFO] Preparing cobertura:cobertura
And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>cobertura-maven-plugin</artifactId>
<configuration>
<skip>true</skip>
</configuration>
<executions>
<execution>
<goals>
<goal>clean</goal>
<goal>check</goal>
<goal>cobertura</goal>
<goal>dump-datafile</goal>
<goal>instrument</goal>
</goals>
</execution>
</executions>
</plugin>
But that had similar results.
I also tried putting this property in the pom:
<properties>
<cobertura.skip>true</cobertura.skip>
</properties>
Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
How do I turn cobertura off for this one module?
-Jim
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Jim McCaskey <ji...@pervasive.com>.
My take away here is that there is a bug in the cobertura plugin so I went ahead and opened it:
http://jira.codehaus.org/browse/MCOBERTURA-154
Any suggestions on how to work around it? I guess I could do some hocus pocus with profiles...
-Jim
-----Original Message-----
From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
Sent: Monday, December 12, 2011 4:20 PM
To: users@maven.apache.org
Subject: RE: skip cobertura for a module
Exactly my conclusion
-Robert
> Date: Mon, 12 Dec 2011 22:09:53 +0000
> Subject: Re: skip cobertura for a module
> From: stephen.alan.connolly@gmail.com
> To: users@maven.apache.org
>
> Is it that the skip mojo is skipping the report but not the forked execution?
>
> On 12 December 2011 21:58, Jim McCaskey <ji...@pervasive.com> wrote:
> > I created a small example of the problem and put it here:
> >
> > http://pastebin.com/QDhx2kVf
> >
> > Just run that pom.xml (I have tried Maven 2.2.1 and Maven 3.0.3) with this command:
> >
> > mvn install cobertura:cobertura
> >
> > If it is truly skipping the cobertura plugin, you should only see this line once:
> >
> > [echo] Running antrun plugin....
> >
> > But you actually see it twice.
> >
> > I also tried this with -X as requested and the value appears to be set to true below.
> >
> > [DEBUG] -----------------------------------------------------------------------
> > [DEBUG] Goal: org.codehaus.mojo:cobertura-maven-plugin:2.5.1:instrument (default-cli)
> > [DEBUG] Style: Regular
> > [DEBUG] Configuration: <?xml version="1.0" encoding="UTF-8"?>
> > <configuration>
> > <attach default-value="false">${cobertura.attach}</attach>
> > <classifier default-value="cobertura">${cobertura.classifier}</classifier>
> > <dataFile default-value="${project.build.directory}/cobertura/cobertura.ser">${cobertura.datafile}</dataFile>
> > <forceMojoExecution default-value="false">${cobertura.force}</forceMojoExecution>
> > <instrumentation>${instrumentation}</instrumentation>
> > <maxmem default-value="64m">${cobertura.maxmem}</maxmem>
> > <mojoExecution default-value="${mojoExecution}"/>
> > <pluginClasspathList default-value="${plugin.artifacts}"/>
> > <project default-value="${project}"/>
> > <quiet default-value="false">${quiet}</quiet>
> > <skip default-value="false">true</skip>
> > </configuration>
> >
> > I'm not putting this into the reporting bit (yet).
> >
> > -Jim
> >
> > -----Original Message-----
> > From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> > Sent: Monday, December 12, 2011 1:57 PM
> > To: users@maven.apache.org
> > Subject: RE: skip cobertura for a module
> >
> >
> > If you run 'mvn cobertura:cobertura -X' (-X means debug-level logging) you should see the used configuration.
> >
> > Can you confirm there's a skip-parameter and that its value is true?
> >
> > The pluginManagement doesn't work for reporting-plugins, so within the reporting-section you are required to specify the version.
> >
> >
> > -Robert
> >
> >
> >
> >> From: jim.mccaskey@pervasive.com
> >> To: users@maven.apache.org
> >> Subject: RE: skip cobertura for a module
> >> Date: Mon, 12 Dec 2011 19:41:04 +0000
> >>
> >> Robert,
> >>
> >> Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
> >>
> >> <plugin>
> >> <groupId>org.codehaus.mojo</groupId>
> >> <artifactId>cobertura-maven-plugin</artifactId>
> >> <version>2.5.1</version>
> >> <configuration>
> >> <skip>true</skip>
> >> </configuration>
> >> </plugin>
> >>
> >> It's still having the same problem.
> >>
> >> Thanks!
> >>
> >> -Jim
> >>
> >> -----Original Message-----
> >> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> >> Sent: Monday, December 12, 2011 1:33 PM
> >> To: users@maven.apache.org
> >> Subject: RE: skip cobertura for a module
> >>
> >>
> >> Try to set the version of the plugin to 2.5.1
> >>
> >> It is a good practice to always set the version for every plugin.
> >>
> >> Maven-3.0.x already warns you about it and it will probably be required one day.
> >>
> >>
> >>
> >> -Robert
> >>
> >>
> >>
> >> ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
> >>
> >> > From: jim.mccaskey@pervasive.com
> >> > To: users@maven.apache.org
> >> > Subject: skip cobertura for a module
> >> > Date: Mon, 12 Dec 2011 19:19:40 +0000
> >> >
> >> > Hello all,
> >> >
> >> > I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
> >> >
> >> > I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
> >> >
> >> > mvn install site:site findbugs:findbugs cobertura:cobertura
> >> >
> >> > Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
> >> >
> >> > Ideally I would just use a skip like this:
> >> >
> >> > <plugin>
> >> > <groupId>org.codehaus.mojo</groupId>
> >> > <artifactId>cobertura-maven-plugin</artifactId>
> >> > <configuration>
> >> > <skip>true</skip>
> >> > </configuration>
> >> > </plugin>
> >> >
> >> > But when I put that in, it still invokes cobertura. At least I see it say this:
> >> >
> >> > [INFO] Preparing cobertura:cobertura
> >> >
> >> > And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
> >> >
> >> > <plugin>
> >> > <groupId>org.codehaus.mojo</groupId>
> >> > <artifactId>cobertura-maven-plugin</artifactId>
> >> > <configuration>
> >> > <skip>true</skip>
> >> > </configuration>
> >> > <executions>
> >> > <execution>
> >> > <goals>
> >> > <goal>clean</goal>
> >> > <goal>check</goal>
> >> > <goal>cobertura</goal>
> >> > <goal>dump-datafile</goal>
> >> > <goal>instrument</goal>
> >> > </goals>
> >> > </execution>
> >> > </executions>
> >> > </plugin>
> >> >
> >> > But that had similar results.
> >> >
> >> > I also tried putting this property in the pom:
> >> >
> >> > <properties>
> >> > <cobertura.skip>true</cobertura.skip>
> >> > </properties>
> >> >
> >> > Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
> >> >
> >> > How do I turn cobertura off for this one module?
> >> >
> >> > -Jim
> >> >
> >> >
> >> > ---------------------------------------------------------------------
> >> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> > For additional commands, e-mail: users-help@maven.apache.org
> >> >
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> For additional commands, e-mail: users-help@maven.apache.org
> >>
> >>
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> For additional commands, e-mail: users-help@maven.apache.org
> >>
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Robert Scholte <rf...@codehaus.org>.
Exactly my conclusion
-Robert
> Date: Mon, 12 Dec 2011 22:09:53 +0000
> Subject: Re: skip cobertura for a module
> From: stephen.alan.connolly@gmail.com
> To: users@maven.apache.org
>
> Is it that the skip mojo is skipping the report but not the forked execution?
>
> On 12 December 2011 21:58, Jim McCaskey <ji...@pervasive.com> wrote:
> > I created a small example of the problem and put it here:
> >
> > http://pastebin.com/QDhx2kVf
> >
> > Just run that pom.xml (I have tried Maven 2.2.1 and Maven 3.0.3) with this command:
> >
> > mvn install cobertura:cobertura
> >
> > If it is truly skipping the cobertura plugin, you should only see this line once:
> >
> > [echo] Running antrun plugin....
> >
> > But you actually see it twice.
> >
> > I also tried this with -X as requested and the value appears to be set to true below.
> >
> > [DEBUG] -----------------------------------------------------------------------
> > [DEBUG] Goal: org.codehaus.mojo:cobertura-maven-plugin:2.5.1:instrument (default-cli)
> > [DEBUG] Style: Regular
> > [DEBUG] Configuration: <?xml version="1.0" encoding="UTF-8"?>
> > <configuration>
> > <attach default-value="false">${cobertura.attach}</attach>
> > <classifier default-value="cobertura">${cobertura.classifier}</classifier>
> > <dataFile default-value="${project.build.directory}/cobertura/cobertura.ser">${cobertura.datafile}</dataFile>
> > <forceMojoExecution default-value="false">${cobertura.force}</forceMojoExecution>
> > <instrumentation>${instrumentation}</instrumentation>
> > <maxmem default-value="64m">${cobertura.maxmem}</maxmem>
> > <mojoExecution default-value="${mojoExecution}"/>
> > <pluginClasspathList default-value="${plugin.artifacts}"/>
> > <project default-value="${project}"/>
> > <quiet default-value="false">${quiet}</quiet>
> > <skip default-value="false">true</skip>
> > </configuration>
> >
> > I'm not putting this into the reporting bit (yet).
> >
> > -Jim
> >
> > -----Original Message-----
> > From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> > Sent: Monday, December 12, 2011 1:57 PM
> > To: users@maven.apache.org
> > Subject: RE: skip cobertura for a module
> >
> >
> > If you run 'mvn cobertura:cobertura -X' (-X means debug-level logging) you should see the used configuration.
> >
> > Can you confirm there's a skip-parameter and that its value is true?
> >
> > The pluginManagement doesn't work for reporting-plugins, so within the reporting-section you are required to specify the version.
> >
> >
> > -Robert
> >
> >
> >
> >> From: jim.mccaskey@pervasive.com
> >> To: users@maven.apache.org
> >> Subject: RE: skip cobertura for a module
> >> Date: Mon, 12 Dec 2011 19:41:04 +0000
> >>
> >> Robert,
> >>
> >> Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
> >>
> >> <plugin>
> >> <groupId>org.codehaus.mojo</groupId>
> >> <artifactId>cobertura-maven-plugin</artifactId>
> >> <version>2.5.1</version>
> >> <configuration>
> >> <skip>true</skip>
> >> </configuration>
> >> </plugin>
> >>
> >> It's still having the same problem.
> >>
> >> Thanks!
> >>
> >> -Jim
> >>
> >> -----Original Message-----
> >> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> >> Sent: Monday, December 12, 2011 1:33 PM
> >> To: users@maven.apache.org
> >> Subject: RE: skip cobertura for a module
> >>
> >>
> >> Try to set the version of the plugin to 2.5.1
> >>
> >> It is a good practice to always set the version for every plugin.
> >>
> >> Maven-3.0.x already warns you about it and it will probably be required one day.
> >>
> >>
> >>
> >> -Robert
> >>
> >>
> >>
> >> ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
> >>
> >> > From: jim.mccaskey@pervasive.com
> >> > To: users@maven.apache.org
> >> > Subject: skip cobertura for a module
> >> > Date: Mon, 12 Dec 2011 19:19:40 +0000
> >> >
> >> > Hello all,
> >> >
> >> > I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
> >> >
> >> > I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
> >> >
> >> > mvn install site:site findbugs:findbugs cobertura:cobertura
> >> >
> >> > Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
> >> >
> >> > Ideally I would just use a skip like this:
> >> >
> >> > <plugin>
> >> > <groupId>org.codehaus.mojo</groupId>
> >> > <artifactId>cobertura-maven-plugin</artifactId>
> >> > <configuration>
> >> > <skip>true</skip>
> >> > </configuration>
> >> > </plugin>
> >> >
> >> > But when I put that in, it still invokes cobertura. At least I see it say this:
> >> >
> >> > [INFO] Preparing cobertura:cobertura
> >> >
> >> > And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
> >> >
> >> > <plugin>
> >> > <groupId>org.codehaus.mojo</groupId>
> >> > <artifactId>cobertura-maven-plugin</artifactId>
> >> > <configuration>
> >> > <skip>true</skip>
> >> > </configuration>
> >> > <executions>
> >> > <execution>
> >> > <goals>
> >> > <goal>clean</goal>
> >> > <goal>check</goal>
> >> > <goal>cobertura</goal>
> >> > <goal>dump-datafile</goal>
> >> > <goal>instrument</goal>
> >> > </goals>
> >> > </execution>
> >> > </executions>
> >> > </plugin>
> >> >
> >> > But that had similar results.
> >> >
> >> > I also tried putting this property in the pom:
> >> >
> >> > <properties>
> >> > <cobertura.skip>true</cobertura.skip>
> >> > </properties>
> >> >
> >> > Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
> >> >
> >> > How do I turn cobertura off for this one module?
> >> >
> >> > -Jim
> >> >
> >> >
> >> > ---------------------------------------------------------------------
> >> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> > For additional commands, e-mail: users-help@maven.apache.org
> >> >
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> For additional commands, e-mail: users-help@maven.apache.org
> >>
> >>
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >> For additional commands, e-mail: users-help@maven.apache.org
> >>
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
Re: skip cobertura for a module
Posted by Stephen Connolly <st...@gmail.com>.
Is it that the skip mojo is skipping the report but not the forked execution?
On 12 December 2011 21:58, Jim McCaskey <ji...@pervasive.com> wrote:
> I created a small example of the problem and put it here:
>
> http://pastebin.com/QDhx2kVf
>
> Just run that pom.xml (I have tried Maven 2.2.1 and Maven 3.0.3) with this command:
>
> mvn install cobertura:cobertura
>
> If it is truly skipping the cobertura plugin, you should only see this line once:
>
> [echo] Running antrun plugin....
>
> But you actually see it twice.
>
> I also tried this with -X as requested and the value appears to be set to true below.
>
> [DEBUG] -----------------------------------------------------------------------
> [DEBUG] Goal: org.codehaus.mojo:cobertura-maven-plugin:2.5.1:instrument (default-cli)
> [DEBUG] Style: Regular
> [DEBUG] Configuration: <?xml version="1.0" encoding="UTF-8"?>
> <configuration>
> <attach default-value="false">${cobertura.attach}</attach>
> <classifier default-value="cobertura">${cobertura.classifier}</classifier>
> <dataFile default-value="${project.build.directory}/cobertura/cobertura.ser">${cobertura.datafile}</dataFile>
> <forceMojoExecution default-value="false">${cobertura.force}</forceMojoExecution>
> <instrumentation>${instrumentation}</instrumentation>
> <maxmem default-value="64m">${cobertura.maxmem}</maxmem>
> <mojoExecution default-value="${mojoExecution}"/>
> <pluginClasspathList default-value="${plugin.artifacts}"/>
> <project default-value="${project}"/>
> <quiet default-value="false">${quiet}</quiet>
> <skip default-value="false">true</skip>
> </configuration>
>
> I'm not putting this into the reporting bit (yet).
>
> -Jim
>
> -----Original Message-----
> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> Sent: Monday, December 12, 2011 1:57 PM
> To: users@maven.apache.org
> Subject: RE: skip cobertura for a module
>
>
> If you run 'mvn cobertura:cobertura -X' (-X means debug-level logging) you should see the used configuration.
>
> Can you confirm there's a skip-parameter and that its value is true?
>
> The pluginManagement doesn't work for reporting-plugins, so within the reporting-section you are required to specify the version.
>
>
> -Robert
>
>
>
>> From: jim.mccaskey@pervasive.com
>> To: users@maven.apache.org
>> Subject: RE: skip cobertura for a module
>> Date: Mon, 12 Dec 2011 19:41:04 +0000
>>
>> Robert,
>>
>> Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
>>
>> <plugin>
>> <groupId>org.codehaus.mojo</groupId>
>> <artifactId>cobertura-maven-plugin</artifactId>
>> <version>2.5.1</version>
>> <configuration>
>> <skip>true</skip>
>> </configuration>
>> </plugin>
>>
>> It's still having the same problem.
>>
>> Thanks!
>>
>> -Jim
>>
>> -----Original Message-----
>> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
>> Sent: Monday, December 12, 2011 1:33 PM
>> To: users@maven.apache.org
>> Subject: RE: skip cobertura for a module
>>
>>
>> Try to set the version of the plugin to 2.5.1
>>
>> It is a good practice to always set the version for every plugin.
>>
>> Maven-3.0.x already warns you about it and it will probably be required one day.
>>
>>
>>
>> -Robert
>>
>>
>>
>> ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
>>
>> > From: jim.mccaskey@pervasive.com
>> > To: users@maven.apache.org
>> > Subject: skip cobertura for a module
>> > Date: Mon, 12 Dec 2011 19:19:40 +0000
>> >
>> > Hello all,
>> >
>> > I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
>> >
>> > I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
>> >
>> > mvn install site:site findbugs:findbugs cobertura:cobertura
>> >
>> > Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
>> >
>> > Ideally I would just use a skip like this:
>> >
>> > <plugin>
>> > <groupId>org.codehaus.mojo</groupId>
>> > <artifactId>cobertura-maven-plugin</artifactId>
>> > <configuration>
>> > <skip>true</skip>
>> > </configuration>
>> > </plugin>
>> >
>> > But when I put that in, it still invokes cobertura. At least I see it say this:
>> >
>> > [INFO] Preparing cobertura:cobertura
>> >
>> > And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
>> >
>> > <plugin>
>> > <groupId>org.codehaus.mojo</groupId>
>> > <artifactId>cobertura-maven-plugin</artifactId>
>> > <configuration>
>> > <skip>true</skip>
>> > </configuration>
>> > <executions>
>> > <execution>
>> > <goals>
>> > <goal>clean</goal>
>> > <goal>check</goal>
>> > <goal>cobertura</goal>
>> > <goal>dump-datafile</goal>
>> > <goal>instrument</goal>
>> > </goals>
>> > </execution>
>> > </executions>
>> > </plugin>
>> >
>> > But that had similar results.
>> >
>> > I also tried putting this property in the pom:
>> >
>> > <properties>
>> > <cobertura.skip>true</cobertura.skip>
>> > </properties>
>> >
>> > Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
>> >
>> > How do I turn cobertura off for this one module?
>> >
>> > -Jim
>> >
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>> > For additional commands, e-mail: users-help@maven.apache.org
>> >
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>> For additional commands, e-mail: users-help@maven.apache.org
>>
>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>> For additional commands, e-mail: users-help@maven.apache.org
>>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Jim McCaskey <ji...@pervasive.com>.
I created a small example of the problem and put it here:
http://pastebin.com/QDhx2kVf
Just run that pom.xml (I have tried Maven 2.2.1 and Maven 3.0.3) with this command:
mvn install cobertura:cobertura
If it is truly skipping the cobertura plugin, you should only see this line once:
[echo] Running antrun plugin....
But you actually see it twice.
I also tried this with -X as requested and the value appears to be set to true below.
[DEBUG] -----------------------------------------------------------------------
[DEBUG] Goal: org.codehaus.mojo:cobertura-maven-plugin:2.5.1:instrument (default-cli)
[DEBUG] Style: Regular
[DEBUG] Configuration: <?xml version="1.0" encoding="UTF-8"?>
<configuration>
<attach default-value="false">${cobertura.attach}</attach>
<classifier default-value="cobertura">${cobertura.classifier}</classifier>
<dataFile default-value="${project.build.directory}/cobertura/cobertura.ser">${cobertura.datafile}</dataFile>
<forceMojoExecution default-value="false">${cobertura.force}</forceMojoExecution>
<instrumentation>${instrumentation}</instrumentation>
<maxmem default-value="64m">${cobertura.maxmem}</maxmem>
<mojoExecution default-value="${mojoExecution}"/>
<pluginClasspathList default-value="${plugin.artifacts}"/>
<project default-value="${project}"/>
<quiet default-value="false">${quiet}</quiet>
<skip default-value="false">true</skip>
</configuration>
I'm not putting this into the reporting bit (yet).
-Jim
-----Original Message-----
From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
Sent: Monday, December 12, 2011 1:57 PM
To: users@maven.apache.org
Subject: RE: skip cobertura for a module
If you run 'mvn cobertura:cobertura -X' (-X means debug-level logging) you should see the used configuration.
Can you confirm there's a skip-parameter and that its value is true?
The pluginManagement doesn't work for reporting-plugins, so within the reporting-section you are required to specify the version.
-Robert
> From: jim.mccaskey@pervasive.com
> To: users@maven.apache.org
> Subject: RE: skip cobertura for a module
> Date: Mon, 12 Dec 2011 19:41:04 +0000
>
> Robert,
>
> Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <version>2.5.1</version>
> <configuration>
> <skip>true</skip>
> </configuration>
> </plugin>
>
> It's still having the same problem.
>
> Thanks!
>
> -Jim
>
> -----Original Message-----
> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> Sent: Monday, December 12, 2011 1:33 PM
> To: users@maven.apache.org
> Subject: RE: skip cobertura for a module
>
>
> Try to set the version of the plugin to 2.5.1
>
> It is a good practice to always set the version for every plugin.
>
> Maven-3.0.x already warns you about it and it will probably be required one day.
>
>
>
> -Robert
>
>
>
> ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
>
> > From: jim.mccaskey@pervasive.com
> > To: users@maven.apache.org
> > Subject: skip cobertura for a module
> > Date: Mon, 12 Dec 2011 19:19:40 +0000
> >
> > Hello all,
> >
> > I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
> >
> > I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
> >
> > mvn install site:site findbugs:findbugs cobertura:cobertura
> >
> > Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
> >
> > Ideally I would just use a skip like this:
> >
> > <plugin>
> > <groupId>org.codehaus.mojo</groupId>
> > <artifactId>cobertura-maven-plugin</artifactId>
> > <configuration>
> > <skip>true</skip>
> > </configuration>
> > </plugin>
> >
> > But when I put that in, it still invokes cobertura. At least I see it say this:
> >
> > [INFO] Preparing cobertura:cobertura
> >
> > And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
> >
> > <plugin>
> > <groupId>org.codehaus.mojo</groupId>
> > <artifactId>cobertura-maven-plugin</artifactId>
> > <configuration>
> > <skip>true</skip>
> > </configuration>
> > <executions>
> > <execution>
> > <goals>
> > <goal>clean</goal>
> > <goal>check</goal>
> > <goal>cobertura</goal>
> > <goal>dump-datafile</goal>
> > <goal>instrument</goal>
> > </goals>
> > </execution>
> > </executions>
> > </plugin>
> >
> > But that had similar results.
> >
> > I also tried putting this property in the pom:
> >
> > <properties>
> > <cobertura.skip>true</cobertura.skip>
> > </properties>
> >
> > Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
> >
> > How do I turn cobertura off for this one module?
> >
> > -Jim
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Robert Scholte <rf...@codehaus.org>.
If you run 'mvn cobertura:cobertura -X' (-X means debug-level logging) you should see the used configuration.
Can you confirm there's a skip-parameter and that its value is true?
The pluginManagement doesn't work for reporting-plugins, so within the reporting-section you are required to specify the version.
-Robert
> From: jim.mccaskey@pervasive.com
> To: users@maven.apache.org
> Subject: RE: skip cobertura for a module
> Date: Mon, 12 Dec 2011 19:41:04 +0000
>
> Robert,
>
> Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <version>2.5.1</version>
> <configuration>
> <skip>true</skip>
> </configuration>
> </plugin>
>
> It's still having the same problem.
>
> Thanks!
>
> -Jim
>
> -----Original Message-----
> From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
> Sent: Monday, December 12, 2011 1:33 PM
> To: users@maven.apache.org
> Subject: RE: skip cobertura for a module
>
>
> Try to set the version of the plugin to 2.5.1
>
> It is a good practice to always set the version for every plugin.
>
> Maven-3.0.x already warns you about it and it will probably be required one day.
>
>
>
> -Robert
>
>
>
> ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
>
> > From: jim.mccaskey@pervasive.com
> > To: users@maven.apache.org
> > Subject: skip cobertura for a module
> > Date: Mon, 12 Dec 2011 19:19:40 +0000
> >
> > Hello all,
> >
> > I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
> >
> > I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
> >
> > mvn install site:site findbugs:findbugs cobertura:cobertura
> >
> > Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
> >
> > Ideally I would just use a skip like this:
> >
> > <plugin>
> > <groupId>org.codehaus.mojo</groupId>
> > <artifactId>cobertura-maven-plugin</artifactId>
> > <configuration>
> > <skip>true</skip>
> > </configuration>
> > </plugin>
> >
> > But when I put that in, it still invokes cobertura. At least I see it say this:
> >
> > [INFO] Preparing cobertura:cobertura
> >
> > And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
> >
> > <plugin>
> > <groupId>org.codehaus.mojo</groupId>
> > <artifactId>cobertura-maven-plugin</artifactId>
> > <configuration>
> > <skip>true</skip>
> > </configuration>
> > <executions>
> > <execution>
> > <goals>
> > <goal>clean</goal>
> > <goal>check</goal>
> > <goal>cobertura</goal>
> > <goal>dump-datafile</goal>
> > <goal>instrument</goal>
> > </goals>
> > </execution>
> > </executions>
> > </plugin>
> >
> > But that had similar results.
> >
> > I also tried putting this property in the pom:
> >
> > <properties>
> > <cobertura.skip>true</cobertura.skip>
> > </properties>
> >
> > Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
> >
> > How do I turn cobertura off for this one module?
> >
> > -Jim
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Jim McCaskey <ji...@pervasive.com>.
Robert,
Thanks much for the response. I have a parent pom that does just that in its pluginManagement section. Under the heading of "it never hurts to try", I went ahead and tried putting this in the offending module:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>cobertura-maven-plugin</artifactId>
<version>2.5.1</version>
<configuration>
<skip>true</skip>
</configuration>
</plugin>
It's still having the same problem.
Thanks!
-Jim
-----Original Message-----
From: rfscholte@hotmail.com [mailto:rfscholte@hotmail.com] On Behalf Of Robert Scholte
Sent: Monday, December 12, 2011 1:33 PM
To: users@maven.apache.org
Subject: RE: skip cobertura for a module
Try to set the version of the plugin to 2.5.1
It is a good practice to always set the version for every plugin.
Maven-3.0.x already warns you about it and it will probably be required one day.
-Robert
ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
> From: jim.mccaskey@pervasive.com
> To: users@maven.apache.org
> Subject: skip cobertura for a module
> Date: Mon, 12 Dec 2011 19:19:40 +0000
>
> Hello all,
>
> I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
>
> I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
>
> mvn install site:site findbugs:findbugs cobertura:cobertura
>
> Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
>
> Ideally I would just use a skip like this:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <configuration>
> <skip>true</skip>
> </configuration>
> </plugin>
>
> But when I put that in, it still invokes cobertura. At least I see it say this:
>
> [INFO] Preparing cobertura:cobertura
>
> And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <configuration>
> <skip>true</skip>
> </configuration>
> <executions>
> <execution>
> <goals>
> <goal>clean</goal>
> <goal>check</goal>
> <goal>cobertura</goal>
> <goal>dump-datafile</goal>
> <goal>instrument</goal>
> </goals>
> </execution>
> </executions>
> </plugin>
>
> But that had similar results.
>
> I also tried putting this property in the pom:
>
> <properties>
> <cobertura.skip>true</cobertura.skip>
> </properties>
>
> Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
>
> How do I turn cobertura off for this one module?
>
> -Jim
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by Robert Scholte <rf...@codehaus.org>.
Try to set the version of the plugin to 2.5.1
It is a good practice to always set the version for every plugin.
Maven-3.0.x already warns you about it and it will probably be required one day.
-Robert
ps. why not just run 'mvn install site'? This should already trigger these plugins if you have defined them in the reporting-section.
> From: jim.mccaskey@pervasive.com
> To: users@maven.apache.org
> Subject: skip cobertura for a module
> Date: Mon, 12 Dec 2011 19:19:40 +0000
>
> Hello all,
>
> I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
>
> I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
>
> mvn install site:site findbugs:findbugs cobertura:cobertura
>
> Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
>
> Ideally I would just use a skip like this:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <configuration>
> <skip>true</skip>
> </configuration>
> </plugin>
>
> But when I put that in, it still invokes cobertura. At least I see it say this:
>
> [INFO] Preparing cobertura:cobertura
>
> And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>cobertura-maven-plugin</artifactId>
> <configuration>
> <skip>true</skip>
> </configuration>
> <executions>
> <execution>
> <goals>
> <goal>clean</goal>
> <goal>check</goal>
> <goal>cobertura</goal>
> <goal>dump-datafile</goal>
> <goal>instrument</goal>
> </goals>
> </execution>
> </executions>
> </plugin>
>
> But that had similar results.
>
> I also tried putting this property in the pom:
>
> <properties>
> <cobertura.skip>true</cobertura.skip>
> </properties>
>
> Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
>
> How do I turn cobertura off for this one module?
>
> -Jim
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
RE: skip cobertura for a module
Posted by "Drury, Tim" <t....@sap.com>.
I just looked at the cobertura maven source the other day, so I took another look. skipMojo() is the first call in the instrument plugin and if skip is true it should log at INFO level: "Skipping cobertura execution"
While I don't have a solution to your issue, I can tell you that cobertura is definitely running on this module.
-tim
-----Original Message-----
From: Jim McCaskey [mailto:jim.mccaskey@pervasive.com]
Sent: Monday, December 12, 2011 2:20 PM
To: 'users@maven.apache.org'
Subject: skip cobertura for a module
Hello all,
I tried posting this on the codehaus user list but it won't accept my e-mails. So let's try here:
I'm having an issue with the cobertura plugin. I have a muti-module build that I invoke like this on a nightly basis:
mvn install site:site findbugs:findbugs cobertura:cobertura
Now all of the modules in the build should build using cobertura, except one. We have some custom stuff that is not entirely the "Maven way" and want to ignore it for the sake of running cobertura (it does not contain code anyway). Here's where I start hitting trouble. It seems that I cannot get the skip to work. It always at least runs the prepare. It's not corbertura that's failing (one of our in house plugins unfortunately), but I don't want that prepare to run at all.
Ideally I would just use a skip like this:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>cobertura-maven-plugin</artifactId>
<configuration>
<skip>true</skip>
</configuration>
</plugin>
But when I put that in, it still invokes cobertura. At least I see it say this:
[INFO] Preparing cobertura:cobertura
And it proceeds to run all the other plugins again. To be pedantic, I tried this as well:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>cobertura-maven-plugin</artifactId>
<configuration>
<skip>true</skip>
</configuration>
<executions>
<execution>
<goals>
<goal>clean</goal>
<goal>check</goal>
<goal>cobertura</goal>
<goal>dump-datafile</goal>
<goal>instrument</goal>
</goals>
</execution>
</executions>
</plugin>
But that had similar results.
I also tried putting this property in the pom:
<properties>
<cobertura.skip>true</cobertura.skip>
</properties>
Again, that did not stop it from running the prepare bit. It seems to always run the prepare.
How do I turn cobertura off for this one module?
-Jim
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org