You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Gian Paolo Buono <gi...@gesca.it> on 2017/09/26 06:04:14 UTC
[restart network services]
Hi all,
which command on router is run when click on restart network services
(home --> network --> 10.1.1.0)
Thanks bye
Re: [restart network services]
Posted by Gian Paolo Buono <gi...@gesca.it>.
ok, but on the same vpc i have a forwarding rules on port https 443 that hangs and I must restart the firewall rules..and these is for me a big problem
thanks
On 09/26/2017 02:59 PM, Sean Lair wrote:
For these false-positive error messages:
site-to-site Vpn Connection to xxxxx on router r-15854-VM(id: 15854) just switch from Connected to Disconnected
We also had that issue, it was a bug and is fixed in 4.9.3 by this pull request:
http://mail01.gesca.it:32224/?dmVyPTEuMDAxJiY2YzY5ODg1MTdjZWE4MDg4ND01OUNBNEY2Ql81NjE1XzEzMzI4XzEmJmFhZTk3NGRmZGE0NmE3YT0xMjIzJiZ1cmw9aHR0cHMlM0ElMkYlMkZnaXRodWIlMkVjb20lMkZhcGFjaGUlMkZjbG91ZHN0YWNrJTJGcHVsbCUyRjIwNDAlMEQ=
-----Original Message-----
From: Gian Paolo Buono [mailto:gianpaolo.buono@gesca.it]
Sent: Tuesday, September 26, 2017 2:05 AM
To: nitinkumar.maharana@accelerite.com<ma...@accelerite.com>
Cc: users@cloudstack.apache.org<ma...@cloudstack.apache.org>
Subject: Re: [restart network services]
Hi Nitin,
thanks but i have a big problem on this vpc, because have a site to stite vpn and often i receive this message:
site-to-site Vpn Connection to xxxxx on router r-15854-VM(id: 15854) just switch from Connected to Disconnected
The vpn is always UP, infact does not lose ping packages, but on the same vpc i have a forwarding rules on port https 443 that hangs and I must restart the firewall rules....
Furthermore i have found in /var/log/cloud.log http://mail01.gesca.it:32224/?dmVyPTEuMDAxJiYyMDdiOTY1NTZiZTQ4Y2NiNT01OUNBNEY2Ql81NjE1XzEzMzI4XzEmJmRhNzhhMTZlOWFlN2Q2OD0xMjIzJiZ1cmw9Y3NuZXRmaWx0ZXIlMkVweQ==, but what is this scripts ? Can i Block it ?
Please, help me...thanks
Gian Paolo
On 09/26/2017 08:55 AM, Nitin Kumar Maharana wrote:
Hi Gianpaolo,
Actually, it runs a couple of scripts based on the number of NICs and rules configured etc.. present in the router.
There is no specific command run on it but I can say a couple of commands run with the help of existing scripts.
To restart the network on the router VM. The below command can be used.
"sudo /etc/init.d/networking restart”
Hope this will help!!
Thanks,
Nitin
On 26-Sep-2017, at 11:34 AM, Gian Paolo Buono <gi...@gesca.it>> wrote:
Hi all,
which command on router is run when click on restart network services (home --> network --> 10.1.1.0)
Thanks bye
DISCLAIMER
==========
This e-mail may contain privileged and confidential information which is the property of Accelerite, a Persistent Systems business. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Accelerite, a Persistent Systems business does not accept any liability for virus infected mails.
RE: [restart network services]
Posted by Sean Lair <sl...@ippathways.com>.
For these false-positive error messages:
site-to-site Vpn Connection to xxxxx on router r-15854-VM(id: 15854) just switch from Connected to Disconnected
We also had that issue, it was a bug and is fixed in 4.9.3 by this pull request:
https://github.com/apache/cloudstack/pull/2040
-----Original Message-----
From: Gian Paolo Buono [mailto:gianpaolo.buono@gesca.it]
Sent: Tuesday, September 26, 2017 2:05 AM
To: nitinkumar.maharana@accelerite.com
Cc: users@cloudstack.apache.org
Subject: Re: [restart network services]
Hi Nitin,
thanks but i have a big problem on this vpc, because have a site to stite vpn and often i receive this message:
site-to-site Vpn Connection to xxxxx on router r-15854-VM(id: 15854) just switch from Connected to Disconnected
The vpn is always UP, infact does not lose ping packages, but on the same vpc i have a forwarding rules on port https 443 that hangs and I must restart the firewall rules....
Furthermore i have found in /var/log/cloud.log csnetfilter.py, but what is this scripts ? Can i Block it ?
Please, help me...thanks
Gian Paolo
On 09/26/2017 08:55 AM, Nitin Kumar Maharana wrote:
Hi Gianpaolo,
Actually, it runs a couple of scripts based on the number of NICs and rules configured etc.. present in the router.
There is no specific command run on it but I can say a couple of commands run with the help of existing scripts.
To restart the network on the router VM. The below command can be used.
"sudo /etc/init.d/networking restart”
Hope this will help!!
Thanks,
Nitin
On 26-Sep-2017, at 11:34 AM, Gian Paolo Buono <gi...@gesca.it>> wrote:
Hi all,
which command on router is run when click on restart network services (home --> network --> 10.1.1.0)
Thanks bye
DISCLAIMER
==========
This e-mail may contain privileged and confidential information which is the property of Accelerite, a Persistent Systems business. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Accelerite, a Persistent Systems business does not accept any liability for virus infected mails.
Re: [restart network services]
Posted by Gian Paolo Buono <gi...@gesca.it>.
Hi Nitin,
thanks but i have a big problem on this vpc, because have a site to stite vpn and often i receive this message:
site-to-site Vpn Connection to xxxxx on router r-15854-VM(id: 15854) just switch from Connected to Disconnected
The vpn is always UP, infact does not lose ping packages, but on the same vpc i have a forwarding rules on port https 443 that hangs and I must restart the firewall rules....
Furthermore i have found in /var/log/cloud.log csnetfilter.py, but what is this scripts ? Can i Block it ?
Please, help me...thanks
Gian Paolo
On 09/26/2017 08:55 AM, Nitin Kumar Maharana wrote:
Hi Gianpaolo,
Actually, it runs a couple of scripts based on the number of NICs and rules configured etc.. present in the router.
There is no specific command run on it but I can say a couple of commands run with the help of existing scripts.
To restart the network on the router VM. The below command can be used.
"sudo /etc/init.d/networking restart”
Hope this will help!!
Thanks,
Nitin
On 26-Sep-2017, at 11:34 AM, Gian Paolo Buono <gi...@gesca.it>> wrote:
Hi all,
which command on router is run when click on restart network services
(home --> network --> 10.1.1.0)
Thanks bye
DISCLAIMER
==========
This e-mail may contain privileged and confidential information which is the property of Accelerite, a Persistent Systems business. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Accelerite, a Persistent Systems business does not accept any liability for virus infected mails.
Re: [restart network services]
Posted by Nitin Kumar Maharana <ni...@accelerite.com>.
Hi Gianpaolo,
Actually, it runs a couple of scripts based on the number of NICs and rules configured etc.. present in the router.
There is no specific command run on it but I can say a couple of commands run with the help of existing scripts.
To restart the network on the router VM. The below command can be used.
"sudo /etc/init.d/networking restart”
Hope this will help!!
Thanks,
Nitin
On 26-Sep-2017, at 11:34 AM, Gian Paolo Buono <gi...@gesca.it>> wrote:
Hi all,
which command on router is run when click on restart network services
(home --> network --> 10.1.1.0)
Thanks bye
DISCLAIMER
==========
This e-mail may contain privileged and confidential information which is the property of Accelerite, a Persistent Systems business. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Accelerite, a Persistent Systems business does not accept any liability for virus infected mails.