You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@cloudstack.apache.org by Andrija Panic <an...@gmail.com> on 2015/05/02 17:34:28 UTC
Secondary Storage vlan/routing question
Hi people,
I have a question regarding vlan tagging of (Secondary)Storage network (and
Public network for that matter).
Current setup:
cloudbr0 -- eth0 Management Net (1G)
eth2+eth3 = bond0 (10G+10G)
cloudbr1 -- bond0.112 Primary Storage Net
cloudbr2 -- bond0.113 Secondary Storage Net
cloudbr3 -- bond0.150 Guest VLAN [for vxlans] net
cloudbr4 -- bond0.160 Public net
My question,
--
Andrija Panić
Re: Secondary Storage vlan/routing question
Posted by Andrija Panic <an...@gmail.com>.
Thx Sanyev for confirmation for vlans
So just to confirm Storage GTW - if i.e. I have defined Storage network as
10.11.0.0/16 and 10.11.0.1 being GTW and (for whatever reason) NFS is on
10.12.0.1 (diferent subnet) - then GTW is beng used to access remote NFS
server, since it's not in the same subnet as "Storage Network".
THanks again for clarification :)
Best,
On 4 May 2015 at 15:02, Sanjeev N <sa...@apache.org> wrote:
> Hi Andrija,
>
> 1.As you mentioned, you don't need to define vlans if already provised.
> 2.GTW is needed for storage network because storage server(e.g. nfs server)
> might not be in the same storage network.
> In that case all access to nfs server would be via GTW.
>
> -Sanjeev
>
>
> On Sat, May 2, 2015 at 9:08 PM, Andrija Panic <an...@gmail.com>
> wrote:
>
> > Sorry, fast fingers...:
> >
> > My question:
> >
> > Since I already provisioned vlan interfaces for Public and (Secondary)
> > Storage networks - should I not define VLAN/VNI for these 2 networks,
> > during creation of new Zone in ACS ? My understanding is that I dont need
> > to define it, based on what I know on how ACS provision vlan
> interfaces...
> >
> > Another question:
> > - I see while defining Secondary Storage net - I need to define GTW - is
> > this GTW really used for anything - I read some docs, but still I'm not
> > clear on this part...
> > Because:
> > All KVM hosts are dirrectly attached to management, primary storage,
> > secondary stroage networks - and I understadn SSVM will be also attached
> to
> > both management and the secondary straoge networks as well - so why is
> GTW
> > needed if no routing is needed in betwenn ?
> >
> > Thanks,
> > Andrija
> >
> >
> > On 2 May 2015 at 17:34, Andrija Panic <an...@gmail.com> wrote:
> >
> > > Hi people,
> > >
> > > I have a question regarding vlan tagging of (Secondary)Storage network
> > > (and Public network for that matter).
> > >
> > >
> > > Current setup:
> > >
> > > cloudbr0 -- eth0 Management Net (1G)
> > > eth2+eth3 = bond0 (10G+10G)
> > > cloudbr1 -- bond0.112 Primary Storage Net
> > > cloudbr2 -- bond0.113 Secondary Storage Net
> > > cloudbr3 -- bond0.150 Guest VLAN [for vxlans] net
> > > cloudbr4 -- bond0.160 Public net
> > >
> > > My question,
> > >
> > >
> > > --
> > >
> > > Andrija Panić
> > >
> >
> >
> >
> > --
> >
> > Andrija Panić
> >
>
--
Andrija Panić
Re: Secondary Storage vlan/routing question
Posted by Sanjeev N <sa...@apache.org>.
Hi Andrija,
1.As you mentioned, you don't need to define vlans if already provised.
2.GTW is needed for storage network because storage server(e.g. nfs server)
might not be in the same storage network.
In that case all access to nfs server would be via GTW.
-Sanjeev
On Sat, May 2, 2015 at 9:08 PM, Andrija Panic <an...@gmail.com>
wrote:
> Sorry, fast fingers...:
>
> My question:
>
> Since I already provisioned vlan interfaces for Public and (Secondary)
> Storage networks - should I not define VLAN/VNI for these 2 networks,
> during creation of new Zone in ACS ? My understanding is that I dont need
> to define it, based on what I know on how ACS provision vlan interfaces...
>
> Another question:
> - I see while defining Secondary Storage net - I need to define GTW - is
> this GTW really used for anything - I read some docs, but still I'm not
> clear on this part...
> Because:
> All KVM hosts are dirrectly attached to management, primary storage,
> secondary stroage networks - and I understadn SSVM will be also attached to
> both management and the secondary straoge networks as well - so why is GTW
> needed if no routing is needed in betwenn ?
>
> Thanks,
> Andrija
>
>
> On 2 May 2015 at 17:34, Andrija Panic <an...@gmail.com> wrote:
>
> > Hi people,
> >
> > I have a question regarding vlan tagging of (Secondary)Storage network
> > (and Public network for that matter).
> >
> >
> > Current setup:
> >
> > cloudbr0 -- eth0 Management Net (1G)
> > eth2+eth3 = bond0 (10G+10G)
> > cloudbr1 -- bond0.112 Primary Storage Net
> > cloudbr2 -- bond0.113 Secondary Storage Net
> > cloudbr3 -- bond0.150 Guest VLAN [for vxlans] net
> > cloudbr4 -- bond0.160 Public net
> >
> > My question,
> >
> >
> > --
> >
> > Andrija Panić
> >
>
>
>
> --
>
> Andrija Panić
>
Re: Secondary Storage vlan/routing question
Posted by Andrija Panic <an...@gmail.com>.
Sorry, fast fingers...:
My question:
Since I already provisioned vlan interfaces for Public and (Secondary)
Storage networks - should I not define VLAN/VNI for these 2 networks,
during creation of new Zone in ACS ? My understanding is that I dont need
to define it, based on what I know on how ACS provision vlan interfaces...
Another question:
- I see while defining Secondary Storage net - I need to define GTW - is
this GTW really used for anything - I read some docs, but still I'm not
clear on this part...
Because:
All KVM hosts are dirrectly attached to management, primary storage,
secondary stroage networks - and I understadn SSVM will be also attached to
both management and the secondary straoge networks as well - so why is GTW
needed if no routing is needed in betwenn ?
Thanks,
Andrija
On 2 May 2015 at 17:34, Andrija Panic <an...@gmail.com> wrote:
> Hi people,
>
> I have a question regarding vlan tagging of (Secondary)Storage network
> (and Public network for that matter).
>
>
> Current setup:
>
> cloudbr0 -- eth0 Management Net (1G)
> eth2+eth3 = bond0 (10G+10G)
> cloudbr1 -- bond0.112 Primary Storage Net
> cloudbr2 -- bond0.113 Secondary Storage Net
> cloudbr3 -- bond0.150 Guest VLAN [for vxlans] net
> cloudbr4 -- bond0.160 Public net
>
> My question,
>
>
> --
>
> Andrija Panić
>
--
Andrija Panić
Re: Secondary Storage vlan/routing question
Posted by Andrija Panic <an...@gmail.com>.
Sorry, fast fingers...:
My question:
Since I already provisioned vlan interfaces for Public and (Secondary)
Storage networks - should I not define VLAN/VNI for these 2 networks,
during creation of new Zone in ACS ? My understanding is that I dont need
to define it, based on what I know on how ACS provision vlan interfaces...
Another question:
- I see while defining Secondary Storage net - I need to define GTW - is
this GTW really used for anything - I read some docs, but still I'm not
clear on this part...
Because:
All KVM hosts are dirrectly attached to management, primary storage,
secondary stroage networks - and I understadn SSVM will be also attached to
both management and the secondary straoge networks as well - so why is GTW
needed if no routing is needed in betwenn ?
Thanks,
Andrija
On 2 May 2015 at 17:34, Andrija Panic <an...@gmail.com> wrote:
> Hi people,
>
> I have a question regarding vlan tagging of (Secondary)Storage network
> (and Public network for that matter).
>
>
> Current setup:
>
> cloudbr0 -- eth0 Management Net (1G)
> eth2+eth3 = bond0 (10G+10G)
> cloudbr1 -- bond0.112 Primary Storage Net
> cloudbr2 -- bond0.113 Secondary Storage Net
> cloudbr3 -- bond0.150 Guest VLAN [for vxlans] net
> cloudbr4 -- bond0.160 Public net
>
> My question,
>
>
> --
>
> Andrija Panić
>
--
Andrija Panić