[incubator-nuttx] 02/02: boards: Add modbus board profile to esp32-devkitc

[xi...@apache.org]

This is an automated email from the ASF dual-hosted git repository.

xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git

commit 065553e59b797ac02dfed88c288e559e5d03da4b
Author: Alan C. Assis <ac...@gmail.com>
AuthorDate: Sun Jan 9 19:49:59 2022 -0300

    boards: Add modbus board profile to esp32-devkitc
    
    You can use mbpoll to read Modbus Input registers:
    
    $ mbpoll -a 10 -b 115200 -P none -t 3 -r 1000 -c 4 /dev/ttyUSB0 -R
---
 .../esp32/esp32-devkitc/configs/modbus/defconfig   | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/boards/xtensa/esp32/esp32-devkitc/configs/modbus/defconfig b/boards/xtensa/esp32/esp32-devkitc/configs/modbus/defconfig
new file mode 100644
index 0000000..43ba194
--- /dev/null
+++ b/boards/xtensa/esp32/esp32-devkitc/configs/modbus/defconfig
@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_MB_TCP_ENABLED is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="esp32-devkitc"
+CONFIG_ARCH_BOARD_ESP32_DEVKITC=y
+CONFIG_ARCH_CHIP="esp32"
+CONFIG_ARCH_CHIP_ESP32=y
+CONFIG_ARCH_CHIP_ESP32WROVER=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_ESP32_UART0=y
+CONFIG_ESP32_UART2=y
+CONFIG_ESP32_UART2_RS485=y
+CONFIG_ESP32_UART2_RS485_DIR_PIN=13
+CONFIG_EXAMPLES_MODBUS=y
+CONFIG_EXAMPLES_MODBUS_BAUD=115200
+CONFIG_EXAMPLES_MODBUS_PARITY=0
+CONFIG_EXAMPLES_MODBUS_PORT=1
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MM_REGIONS=3
+CONFIG_MODBUS=y
+CONFIG_MODBUS_SLAVE=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y