You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@nuttx.apache.org by "Lee, Lup Yuen" <lu...@appkaki.com> on 2025/03/15 21:35:51 UTC
[Article] Porting NuttX to Avaota-A1 SBC (Allwinner A527 SoC)
This article explains how we ported NuttX from QEMU Arm64 Kernel Build to
PINE64 Yuzuki Avaota-A1 SBC based on Allwinner A527 SoC ... Completed
within 24 Hours!
(1) Anyone porting NuttX from QEMU to Real SBC? This walkthrough shall be
mighty helpful!
(2) Avaota-A1 SBC is Open Source Hardware (CERN OHL Licensed). PINE64 sells
it today, maybe we’ll see more manufacturers.
(3) This could be the First Port of Arm64 in NuttX Kernel Build. (NXP
i.MX93 might be another?)
(4) We'll run it as PR Test Bot for validating Arm64 Pull Requests on Real
Hardware. PR Test Bot will be fully automated thanks to the MicroSD
Multiplexer.
We're ready for volunteers to build NuttX Drivers for Avaota-A1 / Allwinner
A527 (GPIO, SPI, I2C, MIPI CSI / DSI, Ethernet, WiFi, ...) Please lemme
know, maybe we can draw something on the Onboard LCD! 🙏
Check out the article: https://lupyuen.org/articles/avaota.html
[image: avaota-title-small.jpg]
Lup
Re: [Article] Porting NuttX to Avaota-A1 SBC (Allwinner A527 SoC)
Posted by Alin Jerpelea <je...@gmail.com>.
Kudos Lup!
On Sat, 15 Mar 2025, 22:37 Lee, Lup Yuen, <lu...@appkaki.com> wrote:
> This article explains how we ported NuttX from QEMU Arm64 Kernel Build to
> PINE64 Yuzuki Avaota-A1 SBC based on Allwinner A527 SoC ... Completed
> within 24 Hours!
>
> (1) Anyone porting NuttX from QEMU to Real SBC? This walkthrough shall be
> mighty helpful!
>
> (2) Avaota-A1 SBC is Open Source Hardware (CERN OHL Licensed). PINE64
> sells it today, maybe we’ll see more manufacturers.
>
> (3) This could be the First Port of Arm64 in NuttX Kernel Build. (NXP
> i.MX93 might be another?)
>
> (4) We'll run it as PR Test Bot for validating Arm64 Pull Requests on Real
> Hardware. PR Test Bot will be fully automated thanks to the MicroSD
> Multiplexer.
>
> We're ready for volunteers to build NuttX Drivers for Avaota-A1 /
> Allwinner A527 (GPIO, SPI, I2C, MIPI CSI / DSI, Ethernet, WiFi, ...) Please
> lemme know, maybe we can draw something on the Onboard LCD! 🙏
>
> Check out the article: https://lupyuen.org/articles/avaota.html
>
> [image: avaota-title-small.jpg]
>
> Lup
>
>
>
Re: [Article] Porting NuttX to Avaota-A1 SBC (Allwinner A527 SoC)
Posted by Tomek CEDRO <to...@cedro.info>.
As always CONGRATULATIONS LUP!! :-)
On Sat, Mar 15, 2025 at 10:37 PM Lee, Lup Yuen <lu...@appkaki.com> wrote:
>
> This article explains how we ported NuttX from QEMU Arm64 Kernel Build to PINE64 Yuzuki Avaota-A1 SBC based on Allwinner A527 SoC ... Completed within 24 Hours!
>
> (1) Anyone porting NuttX from QEMU to Real SBC? This walkthrough shall be mighty helpful!
>
> (2) Avaota-A1 SBC is Open Source Hardware (CERN OHL Licensed). PINE64 sells it today, maybe we’ll see more manufacturers.
>
> (3) This could be the First Port of Arm64 in NuttX Kernel Build. (NXP i.MX93 might be another?)
>
> (4) We'll run it as PR Test Bot for validating Arm64 Pull Requests on Real Hardware. PR Test Bot will be fully automated thanks to the MicroSD Multiplexer.
>
> We're ready for volunteers to build NuttX Drivers for Avaota-A1 / Allwinner A527 (GPIO, SPI, I2C, MIPI CSI / DSI, Ethernet, WiFi, ...) Please lemme know, maybe we can draw something on the Onboard LCD! 🙏
>
> Check out the article: https://lupyuen.org/articles/avaota.html
>
>
>
> Lup
>
>
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info