You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@subversion.apache.org by Swati Kulkarni <sw...@patni.com> on 2007/03/12 05:02:20 UTC

Settiing up Apache Subversion Server..

Hi,

	I have already set up an Apache 2.0.59 Subversion server , I am using
subversion 1.3.0.
	Now my administrators have asked me to do this setup using-
	- Apache Release 2.2.4 (instead of 2.0.59)
	- Subversion: 1.4.3 (instead of 1.3.0)
	So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?
	I referred http://svnbook.red-bean.com/nightly/en/svn-book.pdf for the same
but that svn-book is not fully updated for Subversion1.4.3.
	If you can tell me if above mentioned versions of Apache(2.2.4) and
Subversion(1.4.3) would work together then it would be of great help to me.

Thanks & Regards,
Swati Kulkarni




-----Original Message-----
From: users-help@subversion.tigris.org
[mailto:users-help@subversion.tigris.org]
Sent: Monday, March 12, 2007 10:26 AM
To: swati.lkulkarni@patni.com
Subject: WELCOME to users@subversion.tigris.org


Hi! This is the ezmlm program. I'm managing the
users@subversion.tigris.org mailing list.

Acknowledgment: I have added the address

   swati.lkulkarni@patni.com

to the users mailing list.

Welcome to users@subversion.tigris.org!

The Subversion home page is http://subversion.tigris.org/.  We also
recommend these resources:

   The FAQ:   http://subversion.tigris.org/faq.html
   The Book:  http://svnbook.red-bean.com/

Please save this message so that you know the address you are
subscribed under, in case you later want to unsubscribe or change your
subscription address.


--- Administrative commands for the users list ---

I can handle administrative requests automatically. Please
do not send them to the list address! Instead, send
your message to the correct command address:

To subscribe to the list, send a message to:
   <us...@subversion.tigris.org>

To remove your address from the list, send a message to:
   <us...@subversion.tigris.org>

Send mail to the following for info and FAQ for this list:
   <us...@subversion.tigris.org>
   <us...@subversion.tigris.org>

Similar addresses exist for the digest list:
   <us...@subversion.tigris.org>
   <us...@subversion.tigris.org>

To get messages 123 through 145 (a maximum of 100 per request), mail:
   <us...@subversion.tigris.org>

To get an index with subject and author for messages 123-456 , mail:
   <us...@subversion.tigris.org>

They are always returned as sets of 100, max 2000 per request,
so you'll actually get 100-499.

To receive all messages with the same subject as message 12345,
send an empty message to:
   <us...@subversion.tigris.org>

The messages do not really need to be empty, but I will ignore
their content. Only the ADDRESS you send to is important.

You can start a subscription for an alternate address,
for example "john@host.domain", just add a hyphen and your
address (with '=' instead of '@') after the command word:
<us...@subversion.tigris.org>

To stop subscription for this address, mail:
<us...@subversion.tigris.org>

In both cases, I'll send a confirmation message to that address. When
you receive it, simply reply to it to complete your subscription.

If despite following these instructions, you do not get the
desired results, please contact my owner at
users-owner@subversion.tigris.org. Please be patient, my owner is a
lot slower than I am ;-)

--- Enclosed is a copy of the request I received.

Return-Path: <sw...@patni.com>
Received: (qmail 31492 invoked from network); 12 Mar 2007 04:56:15 -0000
Received: from cylon2.sjc.collab.net (204.16.104.18)
  by sc157.sjc.collab.net with SMTP; 12 Mar 2007 04:56:15 -0000
Received: from pcspune.patni.com ([203.124.143.223])
  by cylon2.sjc.collab.net with ESMTP; 11 Mar 2007 21:56:00 -0700
X-IronPort-Anti-Spam-Filtered: true
X-IronPort-Anti-Spam-Result: AgAAABJ59EXLfI/fh2dsb2JhbACPHgIBCA4q
X-IronPort-AV: i="4.14,271,1170662400";
   d="scan'208"; a="51326584:sNHT18851441"
X-IRONPORT: SCANNED
Received: from navnb.patni.com (navnb.patni.com [192.168.71.20])
	by pcspune.patni.com (8.13.4/8.13.4) with SMTP id l2C4q3LC014264
	for
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
on.tigris.org>; Mon, 12 Mar 2007 10:22:03 +0530
Received: from pawan.patni.com ([192.168.71.34])
 by navnb.patni.com (SMSSMTP 4.1.11.41) with SMTP id M2007031210305212584
 for
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
on.tigris.org>; Mon, 12 Mar 2007 10:30:52 +0530
Received: from IBM0505D010 ([192.168.38.45])
	(authenticated (0 bits))
	by pawan.patni.com (8.12.11/8.12.11) with ESMTP id l2C50qUY011522
	for
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
on.tigris.org>; Mon, 12 Mar 2007 10:30:52 +0530
Reply-To: <sw...@patni.com>
From: "Swati Kulkarni" <sw...@patni.com>
To:
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
on.tigris.org>
Subject: RE: confirm subscribe to users@subversion.tigris.org
Date: Mon, 12 Mar 2007 10:28:00 +0530
Message-ID: <02...@patni.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="----------=_1173675652-26544-6"
X-Priority: 1 (Highest)
X-MSMail-Priority: High
X-Mailer: Microsoft Outlook CWS, Build 9.0.6604 (9.0.2911.0)
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
In-Reply-To: <11...@subversion.tigris.org>
Importance: High
Disposition-Notification-To: "Swati Kulkarni" <sw...@patni.com>
X-Scanned-By: MIMEDefang 2.45

This is a multi-part message in MIME format...

------------=_1173675652-26544-6
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline



-----Original Message-----
From: users-help@subversion.tigris.org
[mailto:users-help@subversion.tigris.org]
Sent: Monday, March 12, 2007 10:24 AM
To: swati.lkulkarni@patni.com
Subject: confirm subscribe to users@subversion.tigris.org


Hi! This is the ezmlm program. I'm managing the
users@subversion.tigris.org mailing list.

To confirm that you would like

   swati.lkulkarni@patni.com

added to the users mailing list, please send
an empty reply to this address:


users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversio
n.tigris.org

Usually, this happens when you just hit the "reply" button.
If this does not work, simply copy the address and paste it into
the "To:" field of a new message.

This confirmation serves two purposes. First, it verifies that I am able
to get mail through to you. Second, it protects you in case someone
forges a subscription request in your name.

Some mail programs are broken and cannot handle long addresses. If you
cannot reply to this request, instead send a message to
<us...@subversion.tigris.org> and put the
entire address listed above into the "Subject:" line.


--- Administrative commands for the users list ---

I can handle administrative requests automatically. Please
do not send them to the list address! Instead, send
your message to the correct command address:

To subscribe to the list, send a message to:
   <us...@subversion.tigris.org>

To remove your address from the list, send a message to:
   <us...@subversion.tigris.org>

Send mail to the following for info and FAQ for this list:
   <us...@subversion.tigris.org>
   <us...@subversion.tigris.org>

Similar addresses exist for the digest list:
   <us...@subversion.tigris.org>
   <us...@subversion.tigris.org>

To get messages 123 through 145 (a maximum of 100 per request), mail:
   <us...@subversion.tigris.org>

To get an index with subject and author for messages 123-456 , mail:
   <us...@subversion.tigris.org>

They are always returned as sets of 100, max 2000 per request,
so you'll actually get 100-499.

To receive all messages with the same subject as message 12345,
send an empty message to:
   <us...@subversion.tigris.org>

The messages do not really need to be empty, but I will ignore
their content. Only the ADDRESS you send to is important.

You can start a subscription for an alternate address,
for example "john@host.domain", just add a hyphen and your
address (with '=' instead of '@') after the command word:
<us...@subversion.tigris.org>

To stop subscription for this address, mail:
<us...@subversion.tigris.org>

In both cases, I'll send a confirmation message to that address. When
you receive it, simply reply to it to complete your subscription.

If despite following these instructions, you do not get the
desired results, please contact my owner at
users-owner@subversion.tigris.org. Please be patient, my owner is a
lot slower than I am ;-)

--- Enclosed is a copy of the request I received.

Return-Path: <sw...@patni.com>
Received: (qmail 30428 invoked from network); 12 Mar 2007 04:54:23 -0000
Received: from cylon1.sjc.collab.net (204.16.104.10)
  by sc157.sjc.collab.net with SMTP; 12 Mar 2007 04:54:23 -0000
Received: from pcspune.patni.com ([203.124.143.223])
  by cylon1.sjc.collab.net with ESMTP; 11 Mar 2007 21:54:07 -0700
X-IronPort-Anti-Spam-Filtered: true
X-IronPort-Anti-Spam-Result: AgAAAHp69EXLfI/fh2dsb2JhbACPHgIBCA4q
X-IronPort-AV: i="4.14,271,1170662400";
   d="scan'208"; a="64562302:sNHT15403647"
X-IRONPORT: SCANNED
Received: from navnb.patni.com (navnb.patni.com [192.168.71.20])
	by pcspune.patni.com (8.13.4/8.13.4) with SMTP id l2C4n6CL014018
	for <us...@subversion.tigris.org>; Mon, 12 Mar 2007 10:20:09
+0530
Received: from pawan.patni.com ([192.168.71.34])
 by navnb.patni.com (SMSSMTP 4.1.11.41) with SMTP id M2007031210285812499
 for <us...@subversion.tigris.org>; Mon, 12 Mar 2007 10:28:58
+0530
Received: from IBM0505D010 ([192.168.38.45])
	(authenticated (0 bits))
	by pawan.patni.com (8.12.11/8.12.11) with ESMTP id l2C4wvjK009511
	for <us...@subversion.tigris.org>; Mon, 12 Mar 2007 10:28:57
+0530
Reply-To: <sw...@patni.com>
From: "Swati Kulkarni" <sw...@patni.com>
To: <us...@subversion.tigris.org>
Subject: Settiing up Apache Subversion Server..
Date: Mon, 12 Mar 2007 10:26:05 +0530
Message-ID: <02...@patni.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="----------=_1173675538-23329-104"
X-Priority: 1 (Highest)
X-MSMail-Priority: High
X-Mailer: Microsoft Outlook CWS, Build 9.0.6604 (9.0.2911.0)
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
Importance: High
Disposition-Notification-To: "Swati Kulkarni" <sw...@patni.com>
X-Scanned-By: MIMEDefang 2.45

This is a multi-part message in MIME format...

------------=_1173675538-23329-104
Content-Type: text/plain;
	charset="ISO-2022-JP"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


Hi,

	I have already set up an Apache 2.0.59 Subversion server , I am using
subversion 1.3.0.
	Now my administrators have asked me to do this setup using-
	- Apache Release 2.2.4 (instead of 2.0.59)
	- Subversion: 1.4.3 (instead of 1.3.0)
	So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?
	I referred http://svnbook.red-bean.com/nightly/en/svn-book.pdf for the
same but that svn-book is not fully updated for Subversion1.4.3.
	If you can tell me if above mentioned versions of Apache(2.2.4) and
Subversion(1.4.3) would work together then it would be of great help to me.

Thanks & Regards,
Swati Kulkarni



http://www.patni.com
World-Wide Partnerships. World-Class Solutions.
_____________________________________________________________________

This e-mail message may contain proprietary, confidential or legally
privileged information for the sole use of the person or entity to
whom this message was originally addressed. Any review, e-transmission
dissemination or other use of or taking of any action in reliance upon
this information by persons or entities other than the intended
recipient is prohibited. If you have received this e-mail in error
kindly delete  this e-mail from your records. If it appears that this
mail has been forwarded to you without proper authority, please notify
us immediately at netadmin@patni.com and delete this mail.
_____________________________________________________________________

------------=_1173675538-23329-104--


http://www.patni.com
World-Wide Partnerships. World-Class Solutions.
_____________________________________________________________________

This e-mail message may contain proprietary, confidential or legally
privileged information for the sole use of the person or entity to
whom this message was originally addressed. Any review, e-transmission
dissemination or other use of or taking of any action in reliance upon
this information by persons or entities other than the intended
recipient is prohibited. If you have received this e-mail in error
kindly delete  this e-mail from your records. If it appears that this
mail has been forwarded to you without proper authority, please notify
us immediately at netadmin@patni.com and delete this mail.
_____________________________________________________________________

------------=_1173675652-26544-6--


http://www.patni.com
World-Wide Partnerships. World-Class Solutions.
_____________________________________________________________________

This e-mail message may contain proprietary, confidential or legally
privileged information for the sole use of the person or entity to
whom this message was originally addressed. Any review, e-transmission
dissemination or other use of or taking of any action in reliance upon
this information by persons or entities other than the intended
recipient is prohibited. If you have received this e-mail in error
kindly delete  this e-mail from your records. If it appears that this
mail has been forwarded to you without proper authority, please notify
us immediately at netadmin@patni.com and delete this mail. 
_____________________________________________________________________


Re: Settiing up Apache Subversion Server..

Posted by Ryan Schmidt <su...@ryandesign.com>.
On Mar 13, 2007, at 05:27, Swati Kulkarni wrote:

>  If you can please explain what are these APR and whats their use  
> for SVN
> then it would be of great great help to me
>  as I am a beginer for Subversion.

APR is the Apache Portable Runtime. It is not related to the Apache  
web server, other than that both products are made by the Apache  
Software Foundation, and that the Apache web server requires APR.  
Subversion also requires APR; this is how Subversion is able to run  
on multiple platforms so easily: APR is a library that takes care of  
all the differences between the platforms, so that the Subversion  
developers don't need to figure it all out themselves.


-- 

To reply to the mailing list, please use your mailer's Reply To All  
function


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org

RE: Settiing up Apache Subversion Server..

Posted by Swati Kulkarni <sw...@patni.com>.
Hi Ryan,
 Actually I have done this setup today and it is working.
 I used svn-1.4.3-setup.exe which is not compatible with Apache2.2.4
 and then I replaced bin,iconv,share folders with the same folders
 in svn-win32-1.4.3. svn-win32-1.4.3 this folder has binaries built against
Apache2.2.4.

 So we have to just load Subversion modules (mod_dav_svn.so) in http.conf
file and restart Apache.

 If you can please explain what are these APR and whats their use for SVN
then it would be of great great help to me
 as I am a beginer for Subversion.


Thanks & Regards,

Swati Kulkarni



On Mar 12, 2007, at 00:02, Swati Kulkarni wrote:

> 	I have already set up an Apache 2.0.59 Subversion server , I am using
> subversion 1.3.0.
> 	Now my administrators have asked me to do this setup using-
> 	- Apache Release 2.2.4 (instead of 2.0.59)
> 	- Subversion: 1.4.3 (instead of 1.3.0)
> 	So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?

Yes, it works fine. I've had it installed that way on my Mac since
January.

You need to know, however, that Subversion and Apache both require
APR, and that you must use the same version of APR for both, or
things will blow up. The version of Apache dictates which version of
APR to use: Apache 2.0.x requires APR 0.9.x, and Apache 2.2.x
requires APR 1.2.x. Subversion (in the subversion-deps archive) comes
with a copy of APR 0.9.x. So if you want to use Subversion with
Apache 2.2.x, you will need to build it against a copy of APR 1.2.x
which you obtain from elsewhere.


--

To reply to the mailing list, please use your mailer's Reply To All
function


http://www.patni.com
World-Wide Partnerships. World-Class Solutions.
_____________________________________________________________________

This e-mail message may contain proprietary, confidential or legally
privileged information for the sole use of the person or entity to
whom this message was originally addressed. Any review, e-transmission
dissemination or other use of or taking of any action in reliance upon
this information by persons or entities other than the intended
recipient is prohibited. If you have received this e-mail in error
kindly delete  this e-mail from your records. If it appears that this
mail has been forwarded to you without proper authority, please notify
us immediately at netadmin@patni.com and delete this mail. 
_____________________________________________________________________


Re: Settiing up Apache Subversion Server..

Posted by Ryan Schmidt <su...@ryandesign.com>.
On Mar 12, 2007, at 00:02, Swati Kulkarni wrote:

> 	I have already set up an Apache 2.0.59 Subversion server , I am using
> subversion 1.3.0.
> 	Now my administrators have asked me to do this setup using-
> 	- Apache Release 2.2.4 (instead of 2.0.59)
> 	- Subversion: 1.4.3 (instead of 1.3.0)
> 	So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?

Yes, it works fine. I've had it installed that way on my Mac since  
January.

You need to know, however, that Subversion and Apache both require  
APR, and that you must use the same version of APR for both, or  
things will blow up. The version of Apache dictates which version of  
APR to use: Apache 2.0.x requires APR 0.9.x, and Apache 2.2.x  
requires APR 1.2.x. Subversion (in the subversion-deps archive) comes  
with a copy of APR 0.9.x. So if you want to use Subversion with  
Apache 2.2.x, you will need to build it against a copy of APR 1.2.x  
which you obtain from elsewhere.


-- 

To reply to the mailing list, please use your mailer's Reply To All  
function


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org

Re: Settiing up Apache Subversion Server..

Posted by Flavio Stanchina <fl...@stanchina.net>.
Swati Kulkarni wrote:
> 	I have already set up an Apache 2.0.59 Subversion server , I am using
> subversion 1.3.0.
> 	Now my administrators have asked me to do this setup using-
> 	- Apache Release 2.2.4 (instead of 2.0.59)
> 	- Subversion: 1.4.3 (instead of 1.3.0)
> 	So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?
> [...]

On which operating system? On Debian GNU/Linux, I'm currently using Apache
2.2.3 and Subversion 1.4.2, so it's quite likely that 2.2.4 and 1.4.3 would
work just fine too.

...and please delete cruft from replies before sending. Your post had 14KB
of useless administrative messages attached at the bottom.

-- 
Ciao, Flavio

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org

Re: Settiing up Apache Subversion Server..

Posted by Ashutosh Mohanty <as...@syncad.com>.
Hi,

It will work fine , both are compatible enough!!

Regards
Ashutosh


Swati Kulkarni wrote:
>> Hi,
>>
>> I have already set up an Apache 2.0.59 Subversion server , I am using
>> subversion 1.3.0.
>> Now my administrators have asked me to do this setup using-
>> - Apache Release 2.2.4 (instead of 2.0.59)
>> - Subversion: 1.4.3 (instead of 1.3.0)
>> So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?
>> I referred http://svnbook.red-bean.com/nightly/en/svn-book.pdf for
>> the same but that svn-book is not fully updated for Subversion1.4.3.
>> If you can tell me if above mentioned versions of Apache(2.2.4) and
>> Subversion(1.4.3) would work together then it would be of great help
>> to me.
>>
>> Thanks & Regards,
>> Swati Kulkarni
>>
>>
>>
>>
>> -----Original Message-----
>> From: users-help@subversion.tigris.org
>> [mailto:users-help@subversion.tigris.org]
>> Sent: Monday, March 12, 2007 10:26 AM
>> To: swati.lkulkarni@patni.com
>> Subject: WELCOME to users@subversion.tigris.org
>>
>>
>> Hi! This is the ezmlm program. I'm managing the
>> users@subversion.tigris.org mailing list.
>>
>> Acknowledgment: I have added the address
>>
>>    swati.lkulkarni@patni.com
>>
>> to the users mailing list.
>>
>> Welcome to users@subversion.tigris.org!
>>
>> The Subversion home page is http://subversion.tigris.org/.  We also
>> recommend these resources:
>>
>>    The FAQ:   http://subversion.tigris.org/faq.html
>>    The Book:  http://svnbook.red-bean.com/
>>
>> Please save this message so that you know the address you are
>> subscribed under, in case you later want to unsubscribe or change
>> your subscription address.
>>
>>
>> --- Administrative commands for the users list ---
>>
>> I can handle administrative requests automatically. Please
>> do not send them to the list address! Instead, send
>> your message to the correct command address:
>>
>> To subscribe to the list, send a message to:
>>    <us...@subversion.tigris.org>
>>
>> To remove your address from the list, send a message to:
>>    <us...@subversion.tigris.org>
>>
>> Send mail to the following for info and FAQ for this list:
>>    <us...@subversion.tigris.org>
>>    <us...@subversion.tigris.org>
>>
>> Similar addresses exist for the digest list:
>>    <us...@subversion.tigris.org>
>>    <us...@subversion.tigris.org>
>>
>> To get messages 123 through 145 (a maximum of 100 per request), mail:
>>    <us...@subversion.tigris.org>
>>
>> To get an index with subject and author for messages 123-456 , mail:
>>    <us...@subversion.tigris.org>
>>
>> They are always returned as sets of 100, max 2000 per request,
>> so you'll actually get 100-499.
>>
>> To receive all messages with the same subject as message 12345,
>> send an empty message to:
>>    <us...@subversion.tigris.org>
>>
>> The messages do not really need to be empty, but I will ignore
>> their content. Only the ADDRESS you send to is important.
>>
>> You can start a subscription for an alternate address,
>> for example "john@host.domain", just add a hyphen and your
>> address (with '=' instead of '@') after the command word:
>> <us...@subversion.tigris.org>
>>
>> To stop subscription for this address, mail:
>> <us...@subversion.tigris.org>
>>
>> In both cases, I'll send a confirmation message to that address. When
>> you receive it, simply reply to it to complete your subscription.
>>
>> If despite following these instructions, you do not get the
>> desired results, please contact my owner at
>> users-owner@subversion.tigris.org. Please be patient, my owner is a
>> lot slower than I am ;-)
>>
>> --- Enclosed is a copy of the request I received.
>>
>> Return-Path: <sw...@patni.com>
>> Received: (qmail 31492 invoked from network); 12 Mar 2007 04:56:15
>> -0000 Received: from cylon2.sjc.collab.net (204.16.104.18)
>>   by sc157.sjc.collab.net with SMTP; 12 Mar 2007 04:56:15 -0000
>> Received: from pcspune.patni.com ([203.124.143.223])
>>   by cylon2.sjc.collab.net with ESMTP; 11 Mar 2007 21:56:00 -0700
>> X-IronPort-Anti-Spam-Filtered: true
>> X-IronPort-Anti-Spam-Result: AgAAABJ59EXLfI/fh2dsb2JhbACPHgIBCA4q
>> X-IronPort-AV: i="4.14,271,1170662400";
>>    d="scan'208"; a="51326584:sNHT18851441"
>> X-IRONPORT: SCANNED
>> Received: from navnb.patni.com (navnb.patni.com [192.168.71.20])
>> by pcspune.patni.com (8.13.4/8.13.4) with SMTP id l2C4q3LC014264
>> for
>>
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
>> on.tigris.org>; Mon, 12 Mar 2007 10:22:03 +0530
>> Received: from pawan.patni.com ([192.168.71.34])
>>  by navnb.patni.com (SMSSMTP 4.1.11.41) with SMTP id
>>  M2007031210305212584 for
>>
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
>> on.tigris.org>; Mon, 12 Mar 2007 10:30:52 +0530
>> Received: from IBM0505D010 ([192.168.38.45])
>> (authenticated (0 bits))
>> by pawan.patni.com (8.12.11/8.12.11) with ESMTP id l2C50qUY011522
>> for
>>
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
>> on.tigris.org>; Mon, 12 Mar 2007 10:30:52 +0530
>> Reply-To: <sw...@patni.com>
>> From: "Swati Kulkarni" <sw...@patni.com>
>> To:
>>
<users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversi
>> on.tigris.org>
>> Subject: RE: confirm subscribe to users@subversion.tigris.org
>> Date: Mon, 12 Mar 2007 10:28:00 +0530
>> Message-ID: <02...@patni.com>
>> MIME-Version: 1.0
>> Content-Type: multipart/mixed;
>> boundary="----------=_1173675652-26544-6" X-Priority: 1 (Highest)
>> X-MSMail-Priority: High
>> X-Mailer: Microsoft Outlook CWS, Build 9.0.6604 (9.0.2911.0)
>> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
>> In-Reply-To: <11...@subversion.tigris.org>
>> Importance: High
>> Disposition-Notification-To: "Swati Kulkarni"
>> <sw...@patni.com> X-Scanned-By: MIMEDefang 2.45
>>
>> This is a multi-part message in MIME format...
>>
>> ------------=_1173675652-26544-6
>> Content-Type: text/plain;
>> charset="iso-8859-1"
>> Content-Transfer-Encoding: 7bit
>> Content-Disposition: inline
>>
>>
>>
>> -----Original Message-----
>> From: users-help@subversion.tigris.org
>> [mailto:users-help@subversion.tigris.org]
>> Sent: Monday, March 12, 2007 10:24 AM
>> To: swati.lkulkarni@patni.com
>> Subject: confirm subscribe to users@subversion.tigris.org
>>
>>
>> Hi! This is the ezmlm program. I'm managing the
>> users@subversion.tigris.org mailing list.
>>
>> To confirm that you would like
>>
>>    swati.lkulkarni@patni.com
>>
>> added to the users mailing list, please send
>> an empty reply to this address:
>>
>>
>>
users-sc.1173675263.cllakgjobgpglfjjnmni-swati.lkulkarni=patni.com@subversio
>> n.tigris.org
>>
>> Usually, this happens when you just hit the "reply" button.
>> If this does not work, simply copy the address and paste it into
>> the "To:" field of a new message.
>>
>> This confirmation serves two purposes. First, it verifies that I am
>> able to get mail through to you. Second, it protects you in case
>> someone
>> forges a subscription request in your name.
>>
>> Some mail programs are broken and cannot handle long addresses. If
>> you cannot reply to this request, instead send a message to
>> <us...@subversion.tigris.org> and put the
>> entire address listed above into the "Subject:" line.
>>
>>
>> --- Administrative commands for the users list ---
>>
>> I can handle administrative requests automatically. Please
>> do not send them to the list address! Instead, send
>> your message to the correct command address:
>>
>> To subscribe to the list, send a message to:
>>    <us...@subversion.tigris.org>
>>
>> To remove your address from the list, send a message to:
>>    <us...@subversion.tigris.org>
>>
>> Send mail to the following for info and FAQ for this list:
>>    <us...@subversion.tigris.org>
>>    <us...@subversion.tigris.org>
>>
>> Similar addresses exist for the digest list:
>>    <us...@subversion.tigris.org>
>>    <us...@subversion.tigris.org>
>>
>> To get messages 123 through 145 (a maximum of 100 per request), mail:
>>    <us...@subversion.tigris.org>
>>
>> To get an index with subject and author for messages 123-456 , mail:
>>    <us...@subversion.tigris.org>
>>
>> They are always returned as sets of 100, max 2000 per request,
>> so you'll actually get 100-499.
>>
>> To receive all messages with the same subject as message 12345,
>> send an empty message to:
>>    <us...@subversion.tigris.org>
>>
>> The messages do not really need to be empty, but I will ignore
>> their content. Only the ADDRESS you send to is important.
>>
>> You can start a subscription for an alternate address,
>> for example "john@host.domain", just add a hyphen and your
>> address (with '=' instead of '@') after the command word:
>> <us...@subversion.tigris.org>
>>
>> To stop subscription for this address, mail:
>> <us...@subversion.tigris.org>
>>
>> In both cases, I'll send a confirmation message to that address. When
>> you receive it, simply reply to it to complete your subscription.
>>
>> If despite following these instructions, you do not get the
>> desired results, please contact my owner at
>> users-owner@subversion.tigris.org. Please be patient, my owner is a
>> lot slower than I am ;-)
>>
>> --- Enclosed is a copy of the request I received.
>>
>> Return-Path: <sw...@patni.com>
>> Received: (qmail 30428 invoked from network); 12 Mar 2007 04:54:23
>> -0000 Received: from cylon1.sjc.collab.net (204.16.104.10)
>>   by sc157.sjc.collab.net with SMTP; 12 Mar 2007 04:54:23 -0000
>> Received: from pcspune.patni.com ([203.124.143.223])
>>   by cylon1.sjc.collab.net with ESMTP; 11 Mar 2007 21:54:07 -0700
>> X-IronPort-Anti-Spam-Filtered: true
>> X-IronPort-Anti-Spam-Result: AgAAAHp69EXLfI/fh2dsb2JhbACPHgIBCA4q
>> X-IronPort-AV: i="4.14,271,1170662400";
>>    d="scan'208"; a="64562302:sNHT15403647"
>> X-IRONPORT: SCANNED
>> Received: from navnb.patni.com (navnb.patni.com [192.168.71.20])
>> by pcspune.patni.com (8.13.4/8.13.4) with SMTP id l2C4n6CL014018
>> for <us...@subversion.tigris.org>; Mon, 12 Mar 2007
>> 10:20:09 +0530
>> Received: from pawan.patni.com ([192.168.71.34])
>>  by navnb.patni.com (SMSSMTP 4.1.11.41) with SMTP id
>>  M2007031210285812499 for <us...@subversion.tigris.org>;
>> Mon, 12 Mar 2007 10:28:58 +0530
>> Received: from IBM0505D010 ([192.168.38.45])
>> (authenticated (0 bits))
>> by pawan.patni.com (8.12.11/8.12.11) with ESMTP id l2C4wvjK009511
>> for <us...@subversion.tigris.org>; Mon, 12 Mar 2007
>> 10:28:57 +0530
>> Reply-To: <sw...@patni.com>
>> From: "Swati Kulkarni" <sw...@patni.com>
>> To: <us...@subversion.tigris.org>
>> Subject: Settiing up Apache Subversion Server..
>> Date: Mon, 12 Mar 2007 10:26:05 +0530
>> Message-ID: <02...@patni.com>
>> MIME-Version: 1.0
>> Content-Type: multipart/mixed;
>> boundary="----------=_1173675538-23329-104" X-Priority: 1 (Highest)
>> X-MSMail-Priority: High
>> X-Mailer: Microsoft Outlook CWS, Build 9.0.6604 (9.0.2911.0)
>> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
>> Importance: High
>> Disposition-Notification-To: "Swati Kulkarni"
>> <sw...@patni.com> X-Scanned-By: MIMEDefang 2.45
>>
>> This is a multi-part message in MIME format...
>>
>> ------------=_1173675538-23329-104
>> Content-Type: text/plain;
>> charset="ISO-2022-JP"
>> Content-Transfer-Encoding: 7bit
>> Content-Disposition: inline
>>
>>
>> Hi,
>>
>> I have already set up an Apache 2.0.59 Subversion server , I am using
>> subversion 1.3.0.
>> Now my administrators have asked me to do this setup using-
>> - Apache Release 2.2.4 (instead of 2.0.59)
>> - Subversion: 1.4.3 (instead of 1.3.0)
>> So I need to know if Subversion 1.4.3 supports Apache2.2.4 ?
>> I referred http://svnbook.red-bean.com/nightly/en/svn-book.pdf for
>> the same but that svn-book is not fully updated for Subversion1.4.3.
>> If you can tell me if above mentioned versions of Apache(2.2.4) and
>> Subversion(1.4.3) would work together then it would be of great help
>> to me.
>>
>> Thanks & Regards,
>> Swati Kulkarni
>>
>>
>>
>> http://www.patni.com
>> World-Wide Partnerships. World-Class Solutions.
>> _____________________________________________________________________
>>
>> This e-mail message may contain proprietary, confidential or legally
>> privileged information for the sole use of the person or entity to
>> whom this message was originally addressed. Any review,
>> e-transmission dissemination or other use of or taking of any action
>> in reliance upon this information by persons or entities other than
>> the intended
>> recipient is prohibited. If you have received this e-mail in error
>> kindly delete  this e-mail from your records. If it appears that this
>> mail has been forwarded to you without proper authority, please
>> notify
>> us immediately at netadmin@patni.com and delete this mail.
>> _____________________________________________________________________
>>
>> ------------=_1173675538-23329-104--
>>
>>
>> http://www.patni.com
>> World-Wide Partnerships. World-Class Solutions.
>> _____________________________________________________________________
>>
>> This e-mail message may contain proprietary, confidential or legally
>> privileged information for the sole use of the person or entity to
>> whom this message was originally addressed. Any review,
>> e-transmission dissemination or other use of or taking of any action
>> in reliance upon this information by persons or entities other than
>> the intended
>> recipient is prohibited. If you have received this e-mail in error
>> kindly delete  this e-mail from your records. If it appears that this
>> mail has been forwarded to you without proper authority, please
>> notify
>> us immediately at netadmin@patni.com and delete this mail.
>> _____________________________________________________________________
>>
>> ------------=_1173675652-26544-6--
>>
>>
>> http://www.patni.com
>> World-Wide Partnerships. World-Class Solutions.
>> _____________________________________________________________________
>>
>> This e-mail message may contain proprietary, confidential or legally
>> privileged information for the sole use of the person or entity to
>> whom this message was originally addressed. Any review,
>> e-transmission dissemination or other use of or taking of any action
>> in reliance upon this information by persons or entities other than
>> the intended
>> recipient is prohibited. If you have received this e-mail in error
>> kindly delete  this e-mail from your records. If it appears that this
>> mail has been forwarded to you without proper authority, please
>> notify
>> us immediately at netadmin@patni.com and delete this mail.
>> _____________________________________________________________________
>>
>>
>
>
>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
>> For additional commands, e-mail: users-help@subversion.tigris.org

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org