You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@subversion.apache.org by jpyork <jp...@hotmail.com> on 2008/03/11 18:40:47 UTC
PMease using Subversion help needed...please help
I have setup PMease to use subversion and when I run the build for the first
time it grabs everything from the repository just fine, but the issue I am
having is that if I try to run it a second time it fails very time because
it can't perform an svn update. The error I get is:
2008-03-11 13:26:55,891 [Thread-593] ERROR - ERROR: Failed to run command:
Executing '/Volumes/Build/subversion/bin/svn' with arguments:
'update'
'/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project'
'--non-interactive'
'--quiet'
'--username'
'jyork'
'--password'
'******'
'-r'
'20'
--
View this message in context: http://www.nabble.com/PMease-using-Subversion-help-needed...please-help-tp15984401p15984401.html
Sent from the Subversion Users mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@subversion.tigris.org
For additional commands, e-mail: users-help@subversion.tigris.org
RE: PMease using Subversion help needed...please help
Posted by john-paul york <jp...@hotmail.com>.
Thanks Hari for all your help that was it....I was deleting and re-creating the folder when I did the build...things are going smooth now...thanks a lot
Date: Thu, 13 Mar 2008 12:46:35 -0700From: hkodungallur@gmail.comTo: jp_york@hotmail.comSubject: Re: PMease using Subversion help needed...please helpCC: users@subversion.tigris.org
On Wed, Mar 12, 2008 at 6:21 AM, john-paul york <jp...@hotmail.com> wrote:
Hari, This is the error I get when I do it through terminal: svn: Directory '/Volumes/Build/project/project_2.2.2/checkouts/project/web/lib/.svn' containing working copy admin area is missing this seems to go hand and hand with:ERROR: Failed to run command: Executing '/Volumes/OsX/opt/subversion/bin/svn' with arguments:
'update'
'/Volumes/Build/project/project_2.2.2/checkouts/project/web'
'--non-interactive'
'--quiet'
'--username'
'jyork'
'--password'
'******'
'-r'
'23' If I go into terminal and go to the web/lib folder there is a .svn folder there, so I don't konw why it would say it is missing.If I delete the web\lib folder and run the build it works, but this error seems to randomly pop up with different locations, before it was web\lib
I go the same error with bean\classes.
These directories are affected by the build in some way or the other. I am guessing that you might be deleting the directories (web/lib or bean/classes) during the build. That is, these are part of your repository, and got checked out during initial build. But during the build ('clean' target may be), you are deleting these directories and along with it deleting the svn metadata folder (.svn).That is the only explanation I can think of.rgds-HariPS: Please 'reply-all'. Thanks!
Date: Tue, 11 Mar 2008 14:42:29 -0700
From: hkodungallur@gmail.comTo: jp_york@hotmail.comSubject: Re: PMease using Subversion help needed...please helpCC: users@subversion.tigris.org
On Tue, Mar 11, 2008 at 12:55 PM, john-paul york <jp...@hotmail.com> wrote:
If I am able to do the original checkout, this means that subversion should be installed correctly...correct? I am just worried that I have not installed subversion correctly...I am using MAC OsX...what is the simplest way to make sure it is installed properly? Thanks for your help
The simplest way to tell is to run the following command: $> svn --version(you may have to give the full path - /Volumes/Build/subversion/bin/svn)If it prints out valid info, then the installation is good.On my linux machine, the above command prints:[~] > svn --versionsvn, version 1.4.3 (r23084) compiled Mar 23 2007, 09:29:55Copyright (C) 2000-2006 CollabNet.Subversion is open source software, see http://subversion.tigris.org/This product includes software developed by CollabNet (http://www.Collab.Net/).The following repository access (RA) modules are available:* ra_dav : Module for accessing a repository via WebDAV (DeltaV) protocol. - handles 'http' scheme - handles 'https' scheme* ra_svn : Module for accessing a repository using the svn network protocol. - handles 'svn' scheme* ra_local : Module for accessing a repository on local disk. - handles 'file' schemeAs you said, your svn installation is good because you were able to successfully checkout. But the problem is when you execute the 'svn update' command. As per your email, it seems like you are constructing the command that needs to be executed to do the svn update. I was suggesting that may be the command that is formed is wrong or the directory mentioned in the command is non-existent or something like that.Are you able to run svn from command line successfully?For this svn update, can you try the following command from command line: $> /Volumes/Build/subversion/bin/svn update /Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project --non-interactive --quiet --username jyork --password ****** -r 20What happens when you run this command?Regards,-HariPS: Can you please "reply-all" when posting to the list? That way many others in the list can help answer the question. In addition, I happen to look at the list very irregularly.
Date: Tue, 11 Mar 2008 12:08:43 -0700From: hkodungallur@gmail.comTo: jp_york@hotmail.comSubject: Re: PMease using Subversion help needed...please helpCC: users@subversion.tigris.org
On Tue, Mar 11, 2008 at 11:40 AM, jpyork <jp...@hotmail.com> wrote:
I have setup PMease to use subversion and when I run the build for the firsttime it grabs everything from the repository just fine, but the issue I amhaving is that if I try to run it a second time it fails very time becauseit can't perform an svn update. The error I get is:2008-03-11 13:26:55,891 [Thread-593] ERROR - ERROR: Failed to run command:Executing '/Volumes/Build/subversion/bin/svn' with arguments:'update''/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project''--non-interactive''--quiet''--username''jyork''--password''******''-r''20'Can you also provide the actual error from the svn update command. The update command must have failed because of many reasons - starting from not forming the right set of arguments (it looks good above; but I have not used PMease to know how it passes it down) or not able to find the directory to update to invalid user/password and many such reasons. I doubt we can help without the actual error from the svn update command.One way to know is to run the command manually by cut pasting the above arguments and see what you get.Thanks,-Hari
Snap and Share. From your phone to your space. Post your pics here.
_________________________________________________________________
Create a handy button so your friends can add U to their buddy list. Try it now!
http://g.msn.ca/ca55/211
Re: PMease using Subversion help needed...please help
Posted by Hari Kodungallur <hk...@gmail.com>.
On Wed, Mar 12, 2008 at 6:21 AM, john-paul york <jp...@hotmail.com> wrote:
> Hari,
>
> This is the error I get when I do it through terminal:
>
>
> svn: Directory '/Volumes/Build/project/project_2.2.2/checkouts/project/web/lib/.svn' containing working copy admin area is missing
>
>
>
> this seems to go hand and hand with:
>
> ERROR: Failed to run command: Executing '/Volumes/OsX/opt/subversion/bin/svn' with arguments:'update'
> '/Volumes/Build/project/project_2.2.2/checkouts/project/web'
> '--non-interactive'
> '--quiet'
> '--username'
> 'jyork'
> '--password'
> '******'
> '-r'
> '23'
>
>
>
> If I go into terminal and go to the web/lib folder there is a .svn folder there, so I don't konw why it would say it is missing.
>
> If I delete the web\lib folder and run the build it works, but this error seems to randomly pop up with different locations, before it was web\lib
>
> I go the same error with bean\classes.
>
>
>
>
These directories are affected by the build in some way or the other. I am
guessing that you might be deleting the directories (web/lib or
bean/classes) during the build. That is, these are part of your repository,
and got checked out during initial build. But during the build ('clean'
target may be), you are deleting these directories and along with it
deleting the svn metadata folder (.svn).
That is the only explanation I can think of.
rgds
-Hari
PS: Please 'reply-all'. Thanks!
>
>
>
>
>
> ------------------------------
> Date: Tue, 11 Mar 2008 14:42:29 -0700
>
> From: hkodungallur@gmail.com
> To: jp_york@hotmail.com
> Subject: Re: PMease using Subversion help needed...please help
> CC: users@subversion.tigris.org
>
>
> On Tue, Mar 11, 2008 at 12:55 PM, john-paul york <jp...@hotmail.com>
> wrote:
>
> If I am able to do the original checkout, this means that subversion
> should be installed correctly...correct? I am just worried that I have not
> installed subversion correctly...I am using MAC OsX...what is the simplest
> way to make sure it is installed properly?
>
> Thanks for your help
>
>
>
> The simplest way to tell is to run the following command:
>
> $> svn --version
>
> (you may have to give the full path - /Volumes/Build/subversion/bin/svn)
>
> If it prints out valid info, then the installation is good.
>
> On my linux machine, the above command prints:
>
> [~] > svn --version
> svn, version 1.4.3 (r23084)
> compiled Mar 23 2007, 09:29:55
>
> Copyright (C) 2000-2006 CollabNet.
> Subversion is open source software, see http://subversion.tigris.org/
> This product includes software developed by CollabNet (
> http://www.Collab.Net/ <http://www.collab.net/>).
>
> The following repository access (RA) modules are available:
>
> * ra_dav : Module for accessing a repository via WebDAV (DeltaV) protocol.
> - handles 'http' scheme
> - handles 'https' scheme
> * ra_svn : Module for accessing a repository using the svn network
> protocol.
> - handles 'svn' scheme
> * ra_local : Module for accessing a repository on local disk.
> - handles 'file' scheme
>
>
> As you said, your svn installation is good because you were able to
> successfully checkout. But the problem is when you execute the 'svn update'
> command. As per your email, it seems like you are constructing the command
> that needs to be executed to do the svn update. I was suggesting that may be
> the command that is formed is wrong or the directory mentioned in the
> command is non-existent or something like that.
>
> Are you able to run svn from command line successfully?
>
> For this svn update, can you try the following command from command line:
>
> $> /Volumes/Build/subversion/bin/svn update
> /Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project
> --non-interactive --quiet --username jyork --password ****** -r 20
>
> What happens when you run this command?
>
> Regards,
> -Hari
>
> PS: Can you please "reply-all" when posting to the list? That way many
> others in the list can help answer the question. In addition, I happen to
> look at the list very irregularly.
>
>
>
>
>
> ------------------------------
> Date: Tue, 11 Mar 2008 12:08:43 -0700
> From: hkodungallur@gmail.com
> To: jp_york@hotmail.com
> Subject: Re: PMease using Subversion help needed...please help
> CC: users@subversion.tigris.org
>
>
>
> On Tue, Mar 11, 2008 at 11:40 AM, jpyork <jp...@hotmail.com> wrote:
>
>
> I have setup PMease to use subversion and when I run the build for the
> first
> time it grabs everything from the repository just fine, but the issue I am
> having is that if I try to run it a second time it fails very time because
> it can't perform an svn update. The error I get is:
>
> 2008-03-11 13:26:55,891 [Thread-593] ERROR - ERROR: Failed to run command:
> Executing '/Volumes/Build/subversion/bin/svn' with arguments:
> 'update'
> '/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project'
> '--non-interactive'
> '--quiet'
> '--username'
> 'jyork'
> '--password'
> '******'
> '-r'
> '20'
>
>
> Can you also provide the actual error from the svn update command. The
> update command must have failed because of many reasons - starting from not
> forming the right set of arguments (it looks good above; but I have not used
> PMease to know how it passes it down) or not able to find the directory to
> update to invalid user/password and many such reasons. I doubt we can help
> without the actual error from the svn update command.
>
> One way to know is to run the command manually by cut pasting the above
> arguments and see what you get.
>
> Thanks,
> -Hari
>
>
>
> ------------------------------
> Snap and Share. From your phone to your space. Post your pics here.<http://g.msn.ca/ca55/210>
>
Re: PMease using Subversion help needed...please help
Posted by Hari Kodungallur <hk...@gmail.com>.
On Tue, Mar 11, 2008 at 12:55 PM, john-paul york <jp...@hotmail.com>
wrote:
> If I am able to do the original checkout, this means that subversion
> should be installed correctly...correct? I am just worried that I have not
> installed subversion correctly...I am using MAC OsX...what is the simplest
> way to make sure it is installed properly?
>
> Thanks for your help
>
The simplest way to tell is to run the following command:
$> svn --version
(you may have to give the full path - /Volumes/Build/subversion/bin/svn)
If it prints out valid info, then the installation is good.
On my linux machine, the above command prints:
[~] > svn --version
svn, version 1.4.3 (r23084)
compiled Mar 23 2007, 09:29:55
Copyright (C) 2000-2006 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (
http://www.Collab.Net/).
The following repository access (RA) modules are available:
* ra_dav : Module for accessing a repository via WebDAV (DeltaV) protocol.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme
As you said, your svn installation is good because you were able to
successfully checkout. But the problem is when you execute the 'svn update'
command. As per your email, it seems like you are constructing the command
that needs to be executed to do the svn update. I was suggesting that may be
the command that is formed is wrong or the directory mentioned in the
command is non-existent or something like that.
Are you able to run svn from command line successfully?
For this svn update, can you try the following command from command line:
$> /Volumes/Build/subversion/bin/svn update
/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project
--non-interactive --quiet --username jyork --password ****** -r 20
What happens when you run this command?
Regards,
-Hari
PS: Can you please "reply-all" when posting to the list? That way many
others in the list can help answer the question. In addition, I happen to
look at the list very irregularly.
>
> ------------------------------
> Date: Tue, 11 Mar 2008 12:08:43 -0700
> From: hkodungallur@gmail.com
> To: jp_york@hotmail.com
> Subject: Re: PMease using Subversion help needed...please help
> CC: users@subversion.tigris.org
>
>
>
> On Tue, Mar 11, 2008 at 11:40 AM, jpyork <jp...@hotmail.com> wrote:
>
>
> I have setup PMease to use subversion and when I run the build for the
> first
> time it grabs everything from the repository just fine, but the issue I am
> having is that if I try to run it a second time it fails very time because
> it can't perform an svn update. The error I get is:
>
> 2008-03-11 13:26:55,891 [Thread-593] ERROR - ERROR: Failed to run command:
> Executing '/Volumes/Build/subversion/bin/svn' with arguments:
> 'update'
> '/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project'
> '--non-interactive'
> '--quiet'
> '--username'
> 'jyork'
> '--password'
> '******'
> '-r'
> '20'
>
>
> Can you also provide the actual error from the svn update command. The
> update command must have failed because of many reasons - starting from not
> forming the right set of arguments (it looks good above; but I have not used
> PMease to know how it passes it down) or not able to find the directory to
> update to invalid user/password and many such reasons. I doubt we can help
> without the actual error from the svn update command.
>
> One way to know is to run the command manually by cut pasting the above
> arguments and see what you get.
>
> Thanks,
> -Hari
>
>
Re: PMease using Subversion help needed...please help
Posted by Hari Kodungallur <hk...@gmail.com>.
On Tue, Mar 11, 2008 at 11:40 AM, jpyork <jp...@hotmail.com> wrote:
>
> I have setup PMease to use subversion and when I run the build for the
> first
> time it grabs everything from the repository just fine, but the issue I am
> having is that if I try to run it a second time it fails very time because
> it can't perform an svn update. The error I get is:
>
> 2008-03-11 13:26:55,891 [Thread-593] ERROR - ERROR: Failed to run command:
> Executing '/Volumes/Build/subversion/bin/svn' with arguments:
> 'update'
> '/Volumes/Build/project/proejecttSubversion_2.2.2/checkouts/project'
> '--non-interactive'
> '--quiet'
> '--username'
> 'jyork'
> '--password'
> '******'
> '-r'
> '20'
>
Can you also provide the actual error from the svn update command. The
update command must have failed because of many reasons - starting from not
forming the right set of arguments (it looks good above; but I have not used
PMease to know how it passes it down) or not able to find the directory to
update to invalid user/password and many such reasons. I doubt we can help
without the actual error from the svn update command.
One way to know is to run the command manually by cut pasting the above
arguments and see what you get.
Thanks,
-Hari