You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@maven.apache.org by cameron101 <ca...@gmail.com> on 2005/12/20 13:26:01 UTC
Re: How to configure default plugins (exclude test)
I too wish to exclude specific TestCase's but have tried the above
suggestion
....
<reporting>
<plugins>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>surefire-report-maven-plugin</artifactId>
<configuration>
<excludes>
<exclude>**/*TransactionalTestCase.java</exclude>
</excludes>
</configuration>
</plugin>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>jxr-maven-plugin</artifactId>
</plugin>
</plugins>
</reporting>
</project>
including updating the pluggins and the exclude does not appear to work !!
Any help greatly appreciated :-)
On 29/11/05, scowx@explosion-it.net <sc...@explosion-it.net> wrote:
>
> Emmanuel
>
> Thanks for helping me.
>
> Stephen
>
>
> Quoting scowx@explosion-it.net:
>
> > Hi
> >
> > Ok, I have figured this out now. The key fact is that I had my
> configuration
> > for my plugin in my POM was defined inside an <executions> tag.
> >
> > Basically for anyone else who needs to know this,
> >
> > You can configure the default behaviour of plugins in your build by
> > adding a tag
> > for the plugin to the <build> section of your pom.
> >
> > However you must NOT put the configuration section inside an
> <Executions>
> > section or it will think that you are asking it to run the plugin again.
> >
> > your plugin should look like this:
> >
> > <plugin>
> > <groupId>org.apache.maven.plugins</groupId>
> > <artifactId>maven-surefire-plugin</artifactId>
> > <configuration>
> > <excludes>
> > <exclude>**/*Test.java</exclude>
> > </excludes>
> > </configuration>
> > </plugin>
> >
> >
> > and NOT like this
> >
> > <plugin>
> > <groupId>org.apache.maven.plugins</groupId>
> > <artifactId>maven-surefire-plugin</artifactId>
> > <executions>
> > <execution>
> > <phase>test</phase>
> > <configuration>
> > <excludes>
> > <exclude>**/*ABCTest.java</exclude>
> > </excludes>
> > </configuration>
> > <goals>
> > <goal>test</goal>
> > </goals>
> > </execution>
> > </executions>
> > </plugin>
> >
> >
> > Quoting scowx@explosion-it.net:
> >
> >> Hi Emmanuel
> >>
> >> Thanks, I have tried that now but it has made no difference.
> >>
> >> Below is my trace and below that is my POM. If you look at the
> >> trace you will
> >> see that the tests are getting run twice and the second time, the
> exclusions
> >> are being applied.
> >>
> >> I do appreciate your help.
> >>
> >> regards
> >>
> >> Stephen
> >>
> >>
> >> C:\workspaces\bdplus\bdp-core>mvn -U install
> >> [INFO] Scanning for projects...
> >> [INFO]
> >>
> ----------------------------------------------------------------------------
> >> [INFO] Building Core
> >> [INFO] task-segment: [install]
> >> [INFO]
> >>
> ----------------------------------------------------------------------------
> >> [INFO] artifact org.apache.maven.plugins:maven-resources-plugin:
> >> checking for
> >> updates from snapshots
> >> [INFO] artifact org.apache.maven.plugins:maven-resources-plugin:
> >> checking for
> >> updates from central
> >> [INFO] artifact org.apache.maven.plugins:maven-compiler-plugin:checking for
> >> updates from snapshots
> >> [INFO] artifact org.apache.maven.plugins:maven-compiler-plugin:checking for
> >> updates from central
> >> [INFO] artifact org.apache.maven.plugins:maven-surefire-plugin:checking for
> >> updates from snapshots
> >> [WARNING] repository metadata for: 'artifact
> >> org.apache.maven.plugins:maven-surefire-plugin' could not be retrieved
> from
> >> repository: snapshots due to an error: Error transferring file
> >> [INFO] Repository 'snapshots' will be blacklisted
> >> [INFO] artifact org.apache.maven.plugins:maven-surefire-plugin:checking for
> >> updates from central
> >> [INFO] artifact org.apache.maven.plugins:maven-jar-plugin: checking
> >> for updates
> >> from central
> >> [INFO] artifact org.apache.maven.plugins:maven-install-plugin: checking
> for
> >> updates from central
> >> [INFO] [resources:resources]
> >> [INFO] Using default encoding to copy filtered resources.
> >> [INFO] [compiler:compile]
> >> [INFO] Nothing to compile - all classes are up to date
> >> [INFO] [bdp-buildcreateenv:create {execution: default}]
> >> [INFO] Starting
> >> [INFO] Creating 4 directories
> >> [INFO] Directory
> >> C:\workspaces\bdplus\bdp-core\target\TestData\Output already
> >> exists.
> >> [INFO] Directory
> >> C:\workspaces\bdplus\bdp-core\target\TestData\Output\Bills\Standard
> already
> >> exists.
> >> [INFO] Directory
> >> C:\workspaces\bdplus\bdp-core\target\TestData\Output\Bills\Diverted
> already
> >> exists.
> >> [INFO] Directory C:\workspaces\bdplus\bdp-core\target\TestData\temp
> already
> >> exists.
> >> [INFO] Finished
> >> [INFO] [resources:testResources]
> >> [INFO] Using default encoding to copy filtered resources.
> >> [INFO] [compiler:testCompile]
> >> [INFO] Nothing to compile - all classes are up to date
> >> Downloading:
> >> http://repo1.maven.org/maven2/surefire/surefire/1.4/surefire-1.4.pom
> >> 663b downloaded
> >> Downloading:
> >>
> http://repo1.maven.org/maven2/surefire/surefire-root/1.1/surefire-root-1.1.pom
> >> 3K downloaded
> >> Downloading:
> >>
> http://repo1.maven.org/maven2/surefire/surefire-booter/1.4/surefire-booter-1.4.pom
> >> 539b downloaded
> >> Downloading:
> >>
> http://repo1.maven.org/maven2/surefire/surefire-booter/1.4/surefire-booter-1.4.jar
> >> 7K downloaded
> >> Downloading:
> >> http://repo1.maven.org/maven2/surefire/surefire/1.4/surefire-1.4.jar
> >> 58K downloaded
> >> [INFO] [surefire:test]
> >> [INFO] Setting reports dir:
> >> C:\workspaces\bdplus\bdp-core\target/surefire-reports
> >>
> >> -------------------------------------------------------
> >> T E S T S
> >> -------------------------------------------------------
> >> [surefire] Running com.uk.cardinal.bdplus.core.generic.ConfigFileTest
> >> [surefire] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 0 sec
> >> org.codehaus.surefire.IsolatedClassLoader
> >> java.lang.LinkageError: Class org/w3c/dom/Document violates loader
> >> constraints
> >> at java.lang.ClassLoader.defineClass1(Native Method)
> >> at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
> >> at
> >> java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
> >> at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
> >> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
> >> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
> >> at java.security.AccessController.doPrivileged(Native Method)
> >> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
> >> at
> >> org.codehaus.surefire.IsolatedClassLoader.loadClass(
> IsolatedClassLoader.java:61)
> >> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
> >> at
> >> com.uk.cardinal.bdplus.generic.Configuration.<init>(Configuration.java
> :42)
> >> at
> >> com.uk.cardinal.bdplus.core.processor.ProcessingEngine.init(
> ProcessingEngine.java:70)
> >> at
> >> com.uk.cardinal.bdplus.core.processor.ProcessingEngine.<init>(
> ProcessingEngine.java:61)
> >> at
> >> com.uk.cardinal.bdplus.core.processor.ProcessingEngineGeneva.<init>(
> ProcessingEngineGeneva.java:60)
> >> at
> >>
> com.uk.cardinal.bdplus.core.processor.invoke.BillDataPlusProcessor.process
> (BillDataPlusProcessor.java:64)
> >> at
> >>
> com.uk.cardinal.bdplus.core.processor.invoke.BillDataPlusProcessor.processFile
> (BillDataPlusProcessor.java:40)
> >> at
> >> com.uk.cardinal.bdplus.core.processor.ProcessorTest.testProcessor(
> ProcessorTest.java:18)
> >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >> at
> >> sun.reflect.NativeMethodAccessorImpl.invoke(
> NativeMethodAccessorImpl.java:39)
> >> at
> >> sun.reflect.DelegatingMethodAccessorImpl.invoke(
> DelegatingMethodAccessorImpl.java:25)
> >> at java.lang.reflect.Method.invoke(Method.java:585)
> >> at junit.framework.TestCase.runTest(TestCase.java:154)
> >> at junit.framework.TestCase.runBare(TestCase.java:127)
> >> at junit.framework.TestResult$1.protect(TestResult.java:106)
> >> at junit.framework.TestResult.runProtected(TestResult.java:124)
> >> at junit.framework.TestResult.run(TestResult.java:109)
> >> at junit.framework.TestCase.run(TestCase.java:118)
> >> at junit.framework.TestSuite.runTest(TestSuite.java:208)
> >> at junit.framework.TestSuite.run(TestSuite.java:203)
> >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >> at
> >> sun.reflect.NativeMethodAccessorImpl.invoke(
> NativeMethodAccessorImpl.java:39)
> >> at
> >> sun.reflect.DelegatingMethodAccessorImpl.invoke(
> DelegatingMethodAccessorImpl.java:25)
> >> at java.lang.reflect.Method.invoke(Method.java:585)
> >> at
> >> org.codehaus.surefire.battery.JUnitBattery.executeJUnit(
> JUnitBattery.java:246)
> >> at
> >> org.codehaus.surefire.battery.JUnitBattery.execute(JUnitBattery.java
> :220)
> >> at org.codehaus.surefire.Surefire.executeBattery(Surefire.java
> :204)
> >> at org.codehaus.surefire.Surefire.run(Surefire.java:153)
> >> at org.codehaus.surefire.Surefire.run(Surefire.java:77)
> >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >> at
> >> sun.reflect.NativeMethodAccessorImpl.invoke(
> NativeMethodAccessorImpl.java:39)
> >> at
> >> sun.reflect.DelegatingMethodAccessorImpl.invoke(
> DelegatingMethodAccessorImpl.java:25)
> >> at java.lang.reflect.Method.invoke(Method.java:585)
> >> at org.codehaus.surefire.SurefireBooter.run(SurefireBooter.java
> :104)
> >> at
> >> org.apache.maven.test.SurefirePlugin.execute(SurefirePlugin.java:303)
> >> at
> >> org.apache.maven.plugin.DefaultPluginManager.executeMojo(
> DefaultPluginManager.java:399)
> >> at
> >> org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(
> DefaultLifecycleExecutor.java:519)
> >> at
> >>
> org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle
> (DefaultLifecycleExecutor.java:469)
> >> at
> >> org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(
> DefaultLifecycleExecutor.java:448)
> >> at
> >>
> org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures
> (DefaultLifecycleExecutor.java:301)
> >> at
> >> org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments
> (DefaultLifecycleExecutor.java:268)
> >> at
> >> org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(
> DefaultLifecycleExecutor.java:137)
> >> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java
> :316)
> >> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
> >> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
> >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >> at
> >> sun.reflect.NativeMethodAccessorImpl.invoke(
> NativeMethodAccessorImpl.java:39)
> >> at
> >> sun.reflect.DelegatingMethodAccessorImpl.invoke(
> DelegatingMethodAccessorImpl.java:25)
> >> at java.lang.reflect.Method.invoke(Method.java:585)
> >> at
> >> org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
> >> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
> >> at
> >> org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
> >> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
> >> [surefire] Running com.uk.cardinal.bdplus.core.processor.ProcessorTest
> >> [surefire] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 0.953sec
> >>
> >> Results :
> >> [surefire] Tests run: 2, Failures: 0, Errors: 0
> >>
> >> [INFO] [surefire:test {execution: default}]
> >> [INFO] Setting reports dir:
> >> C:\workspaces\bdplus\bdp-core\target/surefire-reports
> >>
> >> -------------------------------------------------------
> >> T E S T S
> >> -------------------------------------------------------
> >> There are no test to run.
> >>
> >> Results :
> >> [surefire] Tests run: 0, Failures: 0, Errors: 0
> >>
> >> [INFO] [jar:jar]
> >> [INFO] Building jar:
> >> C:\workspaces\bdplus\bdp-core\target\bdp-core-1.0.0-dev.jar
> >> [INFO] [install:install]
> >> [INFO] Installing
> >> C:\workspaces\bdplus\bdp-core\target\bdp-core-1.0.0-dev.jar to
> >> C:\Documents and
> >>
> Settings\scowx\.m2\repository\com\uk\cardinal\bdplus\bdp-core\1.0.0-dev\bdp-
> core-1.0.0-dev.jar
> >> [INFO]
> >>
> ----------------------------------------------------------------------------
> >> [INFO] BUILD SUCCESSFUL
> >> [INFO]
> >>
> ----------------------------------------------------------------------------
> >> [INFO] Total time: 32 seconds
> >> [INFO] Finished at: Tue Nov 29 15:24:39 GMT 2005
> >> [INFO] Final Memory: 4M/8M
> >> [INFO]
> >>
> ----------------------------------------------------------------------------
> >>
> >> POM
> >>
> >> <build>
> >> <plugins>
> >> <plugin>
> >> <groupId>org.apache.maven.plugins</groupId>
> >> <artifactId>maven-surefire-plugin</artifactId>
> >> <executions>
> >> <execution>
> >> <phase>test</phase>
> >> <configuration>
> >> <excludes>
> >> <exclude>**/*Test.java</exclude>
> >> </excludes>
> >> </configuration>
> >> <goals>
> >> <goal>test</goal>
> >> </goals>
> >> </execution>
> >> </executions>
> >> </plugin>
> >> </plugins>
> >> </build>
> >>
> >>
> >>
> >>
> >>
> >> Quoting Emmanuel Venisse <em...@venisse.net>:
> >>
> >>> works fine for me, you perhaps have an old version of surefire plugin.
> >>> try to run mvn with -U to update your plugin
> >>>
> >>> Emmanuel
> >>>
> >>> scowx@explosion-it.net a �crit :
> >>>> Hi Emmanuel
> >>>>
> >>>> Thank you, but .. I have read that document and it doesn't answer
> >>>> my question.
> >>>>
> >>>> I HAVE configured my pom as per that document and the behaviour is
> >>>> that it has
> >>>> no effect on the default test plugin. All that happens is that
> >>>> the surefire
> >>>> plugin gets executed twice. Once for the default and once because
> >>>> I have added
> >>>> the above to my <build>. the one that has been added to my build
> >>>> excludes the
> >>>> classes but the default one doesn't.
> >>>>
> >>>> Please explain how this works.
> >>>>
> >>>> regards
> >>>>
> >>>> Stephen
> >>>>
> >>>> Quoting Emmanuel Venisse <em...@venisse.net>:
> >>>>
> >>>>> http://maven.apache.org/plugins/maven-surefire-plugin/howto.html
> >>>>>
> >>>>> Emmanuel
> >>>>>
> >>>>> scowx@explosion-it.net a �crit :
> >>>>>
> >>>>>> Hi
> >>>>>>
> >>>>>> This is a general question which applies to all plugins which
> >>>>>> are part of the
> >>>>>> default lifecycles, I am using the surefire plugin as an example:
> >>>>>>
> >>>>>> I want to configure the surefire plugin that gets executed
> >>>>>> during the test
> >>>>>> phase? (I want to exclude cetain tests). How do I do this.
> >>>>>>
> >>>>>> If I add a plugin to my plugins section e.g. :
> >>>>>>
> >>>>>> <plugin>
> >>>>>> <groupId>org.apache.maven.plugins</groupId>
> >>>>>> <artifactId>maven-surefire-plugin</artifactId>
> >>>>>> <executions>
> >>>>>> <execution>
> >>>>>> <phase>test</phase>
> >>>>>> <configuration>
> >>>>>> <excludes>
> >>>>>> <exclude>**/*ABCTest.java</exclude>
> >>>>>> </excludes>
> >>>>>> </configuration>
> >>>>>> <goals>
> >>>>>> <goal>test</goal>
> >>>>>> </goals>
> >>>>>> </execution>
> >>>>>> </executions>
> >>>>>> </plugin>
> >>>>>>
> >>>>>> it has no effect on the default test plugin. All that happens
> >>>>>> is that the
> >>>>>> surefire plugin gets executed twice. Once for the default and
> >>>>>> once because I
> >>>>>> have added the above to my <build>.
> >>>>>>
> >>>>>> regards
> >>>>>>
> >>>>>> Stephen
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> ---------------------------------------------------------------------
> >>>>>> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >>>>>> For additional commands, e-mail: users-help@maven.apache.org
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>>
> ---------------------------------------------------------------------
> >>>>> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> >>>>> For additional commands, e-mail: users-help@maven.apache.org
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> > For additional commands, e-mail: users-help@maven.apache.org
> >
> >
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
> For additional commands, e-mail: users-help@maven.apache.org
>
>
Re: How to configure default plugins (exclude test)
Posted by Benedict Heal <bh...@benedictheal.com>.
I had the same problem, until I was helped to exclude some tests from
being compiled, until on this list (5/12/05) Nik Gonzalez pointed out
the use of <testIncludes> and <testExcludes>.
The script below works fine for me.
Benedict
-----------------------------------
.......
<plugin><!-- what to compile -->
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<configuration>
<source>1.5</source>
<target>1.5</target>
<includes>
<include>**/model/*.java</include>
</includes>
<excludes>
<exclude>**/*Action.java</exclude>
</excludes>
<testIncludes>
<testInclude>ou/erd/**/model/**/*Test.java</testInclude>
</testIncludes>
<testExcludes>
<testExclude>**/*MutabilityTest.java</testExclude>
</testExcludes>
</configuration>
</plugin>
cameron101 wrote:
>I too wish to exclude specific TestCase's but have tried the above
>suggestion
>
>....
> <reporting>
> <plugins>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>surefire-report-maven-plugin</artifactId>
> <configuration>
> <excludes>
> <exclude>**/*TransactionalTestCase.java</exclude>
> </excludes>
> </configuration>
> </plugin>
> <plugin>
> <groupId>org.codehaus.mojo</groupId>
> <artifactId>jxr-maven-plugin</artifactId>
> </plugin>
> </plugins>
> </reporting>
>
></project>
>including updating the pluggins and the exclude does not appear to work !!
>Any help greatly appreciated :-)
>
>
>
>
>On 29/11/05, scowx@explosion-it.net <sc...@explosion-it.net> wrote:
>
>
>>Emmanuel
>>
>>Thanks for helping me.
>>
>>Stephen
>>
>>
>>Quoting scowx@explosion-it.net:
>>
>>
>>
>>>Hi
>>>
>>>Ok, I have figured this out now. The key fact is that I had my
>>>
>>>
>>configuration
>>
>>
>>>for my plugin in my POM was defined inside an <executions> tag.
>>>
>>>Basically for anyone else who needs to know this,
>>>
>>>You can configure the default behaviour of plugins in your build by
>>>adding a tag
>>>for the plugin to the <build> section of your pom.
>>>
>>>However you must NOT put the configuration section inside an
>>>
>>>
>><Executions>
>>
>>
>>>section or it will think that you are asking it to run the plugin again.
>>>
>>>your plugin should look like this:
>>>
>>><plugin>
>>><groupId>org.apache.maven.plugins</groupId>
>>><artifactId>maven-surefire-plugin</artifactId>
>>><configuration>
>>> <excludes>
>>> <exclude>**/*Test.java</exclude>
>>> </excludes>
>>></configuration>
>>></plugin>
>>>
>>>
>>>and NOT like this
>>>
>>><plugin>
>>> <groupId>org.apache.maven.plugins</groupId>
>>> <artifactId>maven-surefire-plugin</artifactId>
>>> <executions>
>>> <execution>
>>> <phase>test</phase>
>>> <configuration>
>>> <excludes>
>>> <exclude>**/*ABCTest.java</exclude>
>>> </excludes>
>>> </configuration>
>>> <goals>
>>> <goal>test</goal>
>>> </goals>
>>> </execution>
>>> </executions>
>>></plugin>
>>>
>>>
>>>Quoting scowx@explosion-it.net:
>>>
>>>
>>>
>>>>Hi Emmanuel
>>>>
>>>>Thanks, I have tried that now but it has made no difference.
>>>>
>>>>Below is my trace and below that is my POM. If you look at the
>>>>trace you will
>>>>see that the tests are getting run twice and the second time, the
>>>>
>>>>
>>exclusions
>>
>>
>>>>are being applied.
>>>>
>>>>I do appreciate your help.
>>>>
>>>>regards
>>>>
>>>>Stephen
>>>>
>>>>
>>>>C:\workspaces\bdplus\bdp-core>mvn -U install
>>>>[INFO] Scanning for projects...
>>>>[INFO]
>>>>
>>>>
>>>>
>>----------------------------------------------------------------------------
>>
>>
>>>>[INFO] Building Core
>>>>[INFO] task-segment: [install]
>>>>[INFO]
>>>>
>>>>
>>>>
>>----------------------------------------------------------------------------
>>
>>
>>>>[INFO] artifact org.apache.maven.plugins:maven-resources-plugin:
>>>>checking for
>>>>updates from snapshots
>>>>[INFO] artifact org.apache.maven.plugins:maven-resources-plugin:
>>>>checking for
>>>>updates from central
>>>>[INFO] artifact org.apache.maven.plugins:maven-compiler-plugin:checking for
>>>>updates from snapshots
>>>>[INFO] artifact org.apache.maven.plugins:maven-compiler-plugin:checking for
>>>>updates from central
>>>>[INFO] artifact org.apache.maven.plugins:maven-surefire-plugin:checking for
>>>>updates from snapshots
>>>>[WARNING] repository metadata for: 'artifact
>>>>org.apache.maven.plugins:maven-surefire-plugin' could not be retrieved
>>>>
>>>>
>>from
>>
>>
>>>>repository: snapshots due to an error: Error transferring file
>>>>[INFO] Repository 'snapshots' will be blacklisted
>>>>[INFO] artifact org.apache.maven.plugins:maven-surefire-plugin:checking for
>>>>updates from central
>>>>[INFO] artifact org.apache.maven.plugins:maven-jar-plugin: checking
>>>>for updates
>>>>from central
>>>>[INFO] artifact org.apache.maven.plugins:maven-install-plugin: checking
>>>>
>>>>
>>for
>>
>>
>>>>updates from central
>>>>[INFO] [resources:resources]
>>>>[INFO] Using default encoding to copy filtered resources.
>>>>[INFO] [compiler:compile]
>>>>[INFO] Nothing to compile - all classes are up to date
>>>>[INFO] [bdp-buildcreateenv:create {execution: default}]
>>>>[INFO] Starting
>>>>[INFO] Creating 4 directories
>>>>[INFO] Directory
>>>>C:\workspaces\bdplus\bdp-core\target\TestData\Output already
>>>>exists.
>>>>[INFO] Directory
>>>>C:\workspaces\bdplus\bdp-core\target\TestData\Output\Bills\Standard
>>>>
>>>>
>>already
>>
>>
>>>>exists.
>>>>[INFO] Directory
>>>>C:\workspaces\bdplus\bdp-core\target\TestData\Output\Bills\Diverted
>>>>
>>>>
>>already
>>
>>
>>>>exists.
>>>>[INFO] Directory C:\workspaces\bdplus\bdp-core\target\TestData\temp
>>>>
>>>>
>>already
>>
>>
>>>>exists.
>>>>[INFO] Finished
>>>>[INFO] [resources:testResources]
>>>>[INFO] Using default encoding to copy filtered resources.
>>>>[INFO] [compiler:testCompile]
>>>>[INFO] Nothing to compile - all classes are up to date
>>>>Downloading:
>>>>http://repo1.maven.org/maven2/surefire/surefire/1.4/surefire-1.4.pom
>>>>663b downloaded
>>>>Downloading:
>>>>
>>>>
>>>>
>>http://repo1.maven.org/maven2/surefire/surefire-root/1.1/surefire-root-1.1.pom
>>
>>
>>>>3K downloaded
>>>>Downloading:
>>>>
>>>>
>>>>
>>http://repo1.maven.org/maven2/surefire/surefire-booter/1.4/surefire-booter-1.4.pom
>>
>>
>>>>539b downloaded
>>>>Downloading:
>>>>
>>>>
>>>>
>>http://repo1.maven.org/maven2/surefire/surefire-booter/1.4/surefire-booter-1.4.jar
>>
>>
>>>>7K downloaded
>>>>Downloading:
>>>>http://repo1.maven.org/maven2/surefire/surefire/1.4/surefire-1.4.jar
>>>>58K downloaded
>>>>[INFO] [surefire:test]
>>>>[INFO] Setting reports dir:
>>>>C:\workspaces\bdplus\bdp-core\target/surefire-reports
>>>>
>>>>-------------------------------------------------------
>>>>T E S T S
>>>>-------------------------------------------------------
>>>>[surefire] Running com.uk.cardinal.bdplus.core.generic.ConfigFileTest
>>>>[surefire] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 0 sec
>>>>org.codehaus.surefire.IsolatedClassLoader
>>>>java.lang.LinkageError: Class org/w3c/dom/Document violates loader
>>>>constraints
>>>> at java.lang.ClassLoader.defineClass1(Native Method)
>>>> at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
>>>> at
>>>>java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
>>>> at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
>>>> at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
>>>> at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
>>>> at java.security.AccessController.doPrivileged(Native Method)
>>>> at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
>>>> at
>>>>org.codehaus.surefire.IsolatedClassLoader.loadClass(
>>>>
>>>>
>>IsolatedClassLoader.java:61)
>>
>>
>>>> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
>>>> at
>>>>com.uk.cardinal.bdplus.generic.Configuration.<init>(Configuration.java
>>>>
>>>>
>>:42)
>>
>>
>>>> at
>>>>com.uk.cardinal.bdplus.core.processor.ProcessingEngine.init(
>>>>
>>>>
>>ProcessingEngine.java:70)
>>
>>
>>>> at
>>>>com.uk.cardinal.bdplus.core.processor.ProcessingEngine.<init>(
>>>>
>>>>
>>ProcessingEngine.java:61)
>>
>>
>>>> at
>>>>com.uk.cardinal.bdplus.core.processor.ProcessingEngineGeneva.<init>(
>>>>
>>>>
>>ProcessingEngineGeneva.java:60)
>>
>>
>>>> at
>>>>
>>>>
>>>>
>>com.uk.cardinal.bdplus.core.processor.invoke.BillDataPlusProcessor.process
>>(BillDataPlusProcessor.java:64)
>>
>>
>>>> at
>>>>
>>>>
>>>>
>>com.uk.cardinal.bdplus.core.processor.invoke.BillDataPlusProcessor.processFile
>>(BillDataPlusProcessor.java:40)
>>
>>
>>>> at
>>>>com.uk.cardinal.bdplus.core.processor.ProcessorTest.testProcessor(
>>>>
>>>>
>>ProcessorTest.java:18)
>>
>>
>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>> at
>>>>sun.reflect.NativeMethodAccessorImpl.invoke(
>>>>
>>>>
>>NativeMethodAccessorImpl.java:39)
>>
>>
>>>> at
>>>>sun.reflect.DelegatingMethodAccessorImpl.invoke(
>>>>
>>>>
>>DelegatingMethodAccessorImpl.java:25)
>>
>>
>>>> at java.lang.reflect.Method.invoke(Method.java:585)
>>>> at junit.framework.TestCase.runTest(TestCase.java:154)
>>>> at junit.framework.TestCase.runBare(TestCase.java:127)
>>>> at junit.framework.TestResult$1.protect(TestResult.java:106)
>>>> at junit.framework.TestResult.runProtected(TestResult.java:124)
>>>> at junit.framework.TestResult.run(TestResult.java:109)
>>>> at junit.framework.TestCase.run(TestCase.java:118)
>>>> at junit.framework.TestSuite.runTest(TestSuite.java:208)
>>>> at junit.framework.TestSuite.run(TestSuite.java:203)
>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>> at
>>>>sun.reflect.NativeMethodAccessorImpl.invoke(
>>>>
>>>>
>>NativeMethodAccessorImpl.java:39)
>>
>>
>>>> at
>>>>sun.reflect.DelegatingMethodAccessorImpl.invoke(
>>>>
>>>>
>>DelegatingMethodAccessorImpl.java:25)
>>
>>
>>>> at java.lang.reflect.Method.invoke(Method.java:585)
>>>> at
>>>>org.codehaus.surefire.battery.JUnitBattery.executeJUnit(
>>>>
>>>>
>>JUnitBattery.java:246)
>>
>>
>>>> at
>>>>org.codehaus.surefire.battery.JUnitBattery.execute(JUnitBattery.java
>>>>
>>>>
>>:220)
>>
>>
>>>> at org.codehaus.surefire.Surefire.executeBattery(Surefire.java
>>>>
>>>>
>>:204)
>>
>>
>>>> at org.codehaus.surefire.Surefire.run(Surefire.java:153)
>>>> at org.codehaus.surefire.Surefire.run(Surefire.java:77)
>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>> at
>>>>sun.reflect.NativeMethodAccessorImpl.invoke(
>>>>
>>>>
>>NativeMethodAccessorImpl.java:39)
>>
>>
>>>> at
>>>>sun.reflect.DelegatingMethodAccessorImpl.invoke(
>>>>
>>>>
>>DelegatingMethodAccessorImpl.java:25)
>>
>>
>>>> at java.lang.reflect.Method.invoke(Method.java:585)
>>>> at org.codehaus.surefire.SurefireBooter.run(SurefireBooter.java
>>>>
>>>>
>>:104)
>>
>>
>>>> at
>>>>org.apache.maven.test.SurefirePlugin.execute(SurefirePlugin.java:303)
>>>> at
>>>>org.apache.maven.plugin.DefaultPluginManager.executeMojo(
>>>>
>>>>
>>DefaultPluginManager.java:399)
>>
>>
>>>> at
>>>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(
>>>>
>>>>
>>DefaultLifecycleExecutor.java:519)
>>
>>
>>>> at
>>>>
>>>>
>>>>
>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle
>>(DefaultLifecycleExecutor.java:469)
>>
>>
>>>> at
>>>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(
>>>>
>>>>
>>DefaultLifecycleExecutor.java:448)
>>
>>
>>>> at
>>>>
>>>>
>>>>
>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures
>>(DefaultLifecycleExecutor.java:301)
>>
>>
>>>> at
>>>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments
>>>>
>>>>
>>(DefaultLifecycleExecutor.java:268)
>>
>>
>>>> at
>>>>org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(
>>>>
>>>>
>>DefaultLifecycleExecutor.java:137)
>>
>>
>>>> at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java
>>>>
>>>>
>>:316)
>>
>>
>>>> at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:113)
>>>> at org.apache.maven.cli.MavenCli.main(MavenCli.java:249)
>>>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>>>> at
>>>>sun.reflect.NativeMethodAccessorImpl.invoke(
>>>>
>>>>
>>NativeMethodAccessorImpl.java:39)
>>
>>
>>>> at
>>>>sun.reflect.DelegatingMethodAccessorImpl.invoke(
>>>>
>>>>
>>DelegatingMethodAccessorImpl.java:25)
>>
>>
>>>> at java.lang.reflect.Method.invoke(Method.java:585)
>>>> at
>>>>org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
>>>> at org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
>>>> at
>>>>org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
>>>> at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
>>>>[surefire] Running com.uk.cardinal.bdplus.core.processor.ProcessorTest
>>>>[surefire] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 0.953sec
>>>>
>>>>Results :
>>>>[surefire] Tests run: 2, Failures: 0, Errors: 0
>>>>
>>>>[INFO] [surefire:test {execution: default}]
>>>>[INFO] Setting reports dir:
>>>>C:\workspaces\bdplus\bdp-core\target/surefire-reports
>>>>
>>>>-------------------------------------------------------
>>>>T E S T S
>>>>-------------------------------------------------------
>>>>There are no test to run.
>>>>
>>>>Results :
>>>>[surefire] Tests run: 0, Failures: 0, Errors: 0
>>>>
>>>>[INFO] [jar:jar]
>>>>[INFO] Building jar:
>>>>C:\workspaces\bdplus\bdp-core\target\bdp-core-1.0.0-dev.jar
>>>>[INFO] [install:install]
>>>>[INFO] Installing
>>>>C:\workspaces\bdplus\bdp-core\target\bdp-core-1.0.0-dev.jar to
>>>>C:\Documents and
>>>>
>>>>
>>>>
>>Settings\scowx\.m2\repository\com\uk\cardinal\bdplus\bdp-core\1.0.0-dev\bdp-
>>core-1.0.0-dev.jar
>>
>>
>>>>[INFO]
>>>>
>>>>
>>>>
>>----------------------------------------------------------------------------
>>
>>
>>>>[INFO] BUILD SUCCESSFUL
>>>>[INFO]
>>>>
>>>>
>>>>
>>----------------------------------------------------------------------------
>>
>>
>>>>[INFO] Total time: 32 seconds
>>>>[INFO] Finished at: Tue Nov 29 15:24:39 GMT 2005
>>>>[INFO] Final Memory: 4M/8M
>>>>[INFO]
>>>>
>>>>
>>>>
>>----------------------------------------------------------------------------
>>
>>
>>>>POM
>>>>
>>>><build>
>>>> <plugins>
>>>> <plugin>
>>>> <groupId>org.apache.maven.plugins</groupId>
>>>> <artifactId>maven-surefire-plugin</artifactId>
>>>> <executions>
>>>> <execution>
>>>> <phase>test</phase>
>>>> <configuration>
>>>> <excludes>
>>>> <exclude>**/*Test.java</exclude>
>>>> </excludes>
>>>> </configuration>
>>>> <goals>
>>>> <goal>test</goal>
>>>> </goals>
>>>> </execution>
>>>> </executions>
>>>> </plugin>
>>>> </plugins>
>>>> </build>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>Quoting Emmanuel Venisse <em...@venisse.net>:
>>>>
>>>>
>>>>
>>>>>works fine for me, you perhaps have an old version of surefire plugin.
>>>>>try to run mvn with -U to update your plugin
>>>>>
>>>>>Emmanuel
>>>>>
>>>>>scowx@explosion-it.net a �crit :
>>>>>
>>>>>
>>>>>>Hi Emmanuel
>>>>>>
>>>>>>Thank you, but .. I have read that document and it doesn't answer
>>>>>>my question.
>>>>>>
>>>>>>I HAVE configured my pom as per that document and the behaviour is
>>>>>>that it has
>>>>>>no effect on the default test plugin. All that happens is that
>>>>>>the surefire
>>>>>>plugin gets executed twice. Once for the default and once because
>>>>>>I have added
>>>>>>the above to my <build>. the one that has been added to my build
>>>>>>excludes the
>>>>>>classes but the default one doesn't.
>>>>>>
>>>>>>Please explain how this works.
>>>>>>
>>>>>>regards
>>>>>>
>>>>>>Stephen
>>>>>>
>>>>>>Quoting Emmanuel Venisse <em...@venisse.net>:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>http://maven.apache.org/plugins/maven-surefire-plugin/howto.html
>>>>>>>
>>>>>>>Emmanuel
>>>>>>>
>>>>>>>scowx@explosion-it.net a �crit :
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>Hi
>>>>>>>>
>>>>>>>>This is a general question which applies to all plugins which
>>>>>>>>are part of the
>>>>>>>>default lifecycles, I am using the surefire plugin as an example:
>>>>>>>>
>>>>>>>>I want to configure the surefire plugin that gets executed
>>>>>>>>during the test
>>>>>>>>phase? (I want to exclude cetain tests). How do I do this.
>>>>>>>>
>>>>>>>>If I add a plugin to my plugins section e.g. :
>>>>>>>>
>>>>>>>><plugin>
>>>>>>>> <groupId>org.apache.maven.plugins</groupId>
>>>>>>>> <artifactId>maven-surefire-plugin</artifactId>
>>>>>>>> <executions>
>>>>>>>> <execution>
>>>>>>>> <phase>test</phase>
>>>>>>>> <configuration>
>>>>>>>> <excludes>
>>>>>>>> <exclude>**/*ABCTest.java</exclude>
>>>>>>>> </excludes>
>>>>>>>> </configuration>
>>>>>>>> <goals>
>>>>>>>> <goal>test</goal>
>>>>>>>> </goals>
>>>>>>>> </execution>
>>>>>>>> </executions>
>>>>>>>></plugin>
>>>>>>>>
>>>>>>>>it has no effect on the default test plugin. All that happens
>>>>>>>>is that the
>>>>>>>>surefire plugin gets executed twice. Once for the default and
>>>>>>>>once because I
>>>>>>>>have added the above to my <build>.
>>>>>>>>
>>>>>>>>regards
>>>>>>>>
>>>>>>>>Stephen
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>---------------------------------------------------------------------
>>
>>
>>>>>>>>To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>>>>>>>>For additional commands, e-mail: users-help@maven.apache.org
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>---------------------------------------------------------------------
>>
>>
>>>>>>>To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>>>>>>>For additional commands, e-mail: users-help@maven.apache.org
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>---------------------------------------------------------------------
>>>To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>>>For additional commands, e-mail: users-help@maven.apache.org
>>>
>>>
>>>
>>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
>>For additional commands, e-mail: users-help@maven.apache.org
>>
>>
>>
>>
>>------------------------------------------------------------------------
>>
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.0.371 / Virus Database: 267.14.1/206 - Release Date: 16/12/2005
>>
>>
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@maven.apache.org
For additional commands, e-mail: users-help@maven.apache.org