You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@royale.apache.org by "Frost, Andrew" <An...@Harman.com> on 2019/07/22 15:13:50 UTC

ComboBox list-item renderer

Hi again

Just in case someone's already done this and knows already how to set it up: we want to have an itemRenderer for the ListView part of a ComboBox control, i.e. when you click on the ComboBox button and it creates the ListView, we need a custom renderer. Currently it's defaulting to StringItemRenderer (from the call [1] within the default ItemRendererClassFactory), but we want it instead to use the inline MXML [2].

I'm hoping that we can set this up by adding a bead of some sort to the ComboBox element that will tell it what item renderer to use; all the item renderer examples I can find are just using a list view directly rather than being something that's set up via a ComboBox. So far we've created a custom View for the ComboBox and we are controlling the creation of the ListView, but this creation doesn't then set up any of the MXMLDescriptor values which are needed for this to work...

Hope that makes sense. Don't worry if not, we'll get to the bottom of it, but I wondered if someone already had done this and knew how to do it :-)

thanks

   Andrew



[1] Current way ItemRenderClassFactory selects the item renderer:
if (_strand is IItemRendererProvider && (_strand as IItemRendererProvider).itemRenderer) { ... }
else {
    var itemRendererClass:Class = ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;  <<<<< we're getting StringItemRenderer here
    if (itemRendererClass) { ... }
    else if (!MXMLDescriptor) { ... }
    <<< we want it to hit this point i.e. not get set up because it falls through and then uses the MXMLDescriptor value

[2] Our code:
  <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
    <mx:itemRenderer>
      <js:ItemRendererClassFactory>  <<<< was "fx:Component"
        <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout in here ...  </mx:HBox>
      </js:ItemRendererClassFactory>
    </mx:itemRenderer>
  </mx:ComboBox>





Re: ComboBox list-item renderer

Posted by Carlos Rovira <ca...@apache.org>.
In fact, neither Basic or Jewel ComboBox has itemRenderer property ;)

@Andrew, what about to submit a PR to add this one? though it would be
possible?

thanks



El lun., 22 jul. 2019 a las 19:07, Yishay Weiss (<yi...@hotmail.com>)
escribió:

> Oh, it looks like you’re one step ahead of me. Didn’t read your mail
> carefully enough. I think you can safely open a bug, or try to write the
> bead yourself.
>
> From: Frost, Andrew<ma...@Harman.com>
> Sent: Monday, July 22, 2019 7:53 PM
> To: dev@royale.apache.org<ma...@royale.apache.org>
> Subject: RE: ComboBox list-item renderer
>
> Thanks - yes, happy to adjust our code to that sort of format, but we
> continue to hit the issue that this is a renderer for a list, being set on
> the list, and we want to have a renderer for the list that's being created
> at runtime from the combo box.
>
> It might be that we can set the itemRenderer property of the list object
> as it's created by the combo box's view object, but this feels a little
> hacky and it would be nicer if we could accomplish this just via MXML or
> CSS..
>
> cheers
>
>
> -----Original Message-----
> From: Yishay Weiss <yi...@hotmail.com>
> Sent: 22 July 2019 17:43
> To: dev@royale.apache.org
> Subject: [EXTERNAL] RE: ComboBox list-item renderer
>
> Another option is to specify the renderer class as an mxml att [1].
> ItemRenderers are not beads, so adding them to the beads list has no effect
> (it should actually cause an RTE).
>
>
>
> [1]
> https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169
>
>
>
> ________________________________
> From: Carlos Rovira <ca...@apache.org>
> Sent: Monday, July 22, 2019 6:32:27 PM
> To: dev@royale.apache.org <de...@royale.apache.org>
> Subject: Re: ComboBox list-item renderer
>
> Hi Andrew,
>
> for this one in Royale it use to be done in CSS. For example in tour de
> jewel for List we do:
>
> Source code in GitHub
> <
> https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml
> >
>
> <j:List id="iconList" width="200" height="300" className="
> iconListItemRenderer" labelField="label">
>
> and in iconListItemRenderer you can find
>
> .iconListItemRenderer
> {
> IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
> }
>
> but as well we should can do as inline in MXML, so if that does not work
> it's a bug to solve I think...
>
> HTH
>
> Carlos
>
>
> El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<Andrew.Frost@harman.com
> >)
> escribió:
>
> > Hi again
> >
> > Just in case someone's already done this and knows already how to set
> > it
> > up: we want to have an itemRenderer for the ListView part of a
> > ComboBox control, i.e. when you click on the ComboBox button and it
> > creates the ListView, we need a custom renderer. Currently it's
> > defaulting to StringItemRenderer (from the call [1] within the default
> > ItemRendererClassFactory), but we want it instead to use the inline
> > MXML [2].
> >
> > I'm hoping that we can set this up by adding a bead of some sort to
> > the ComboBox element that will tell it what item renderer to use; all
> > the item renderer examples I can find are just using a list view
> > directly rather than being something that's set up via a ComboBox. So
> > far we've created a custom View for the ComboBox and we are
> > controlling the creation of the ListView, but this creation doesn't
> > then set up any of the MXMLDescriptor values which are needed for this
> to work...
> >
> > Hope that makes sense. Don't worry if not, we'll get to the bottom of
> > it, but I wondered if someone already had done this and knew how to do
> > it :-)
> >
> > thanks
> >
> >    Andrew
> >
> >
> >
> > [1] Current way ItemRenderClassFactory selects the item renderer:
> > if (_strand is IItemRendererProvider && (_strand as
> > IItemRendererProvider).itemRenderer) { ... } else {
> >     var itemRendererClass:Class =
> > ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> > <<<<< we're getting StringItemRenderer here
> >     if (itemRendererClass) { ... }
> >     else if (!MXMLDescriptor) { ... }
> >     <<< we want it to hit this point i.e. not get set up because it
> > falls through and then uses the MXMLDescriptor value
> >
> > [2] Our code:
> >   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
> >     <mx:itemRenderer>
> >       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
> >         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout
> > in here ...  </mx:HBox>
> >       </js:ItemRendererClassFactory>
> >     </mx:itemRenderer>
> >   </mx:ComboBox>
> >
> >
> >
> >
> >
>
> --
> Carlos Rovira
>
> https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira
>
>

-- 
Carlos Rovira
http://about.me/carlosrovira

Re: ComboBox list-item renderer

Posted by Carlos Rovira <ca...@apache.org>.
Hi Andrew,

El mar., 23 jul. 2019 a las 16:40, Frost, Andrew (<An...@harman.com>)
escribió:

> There's one interesting issue where there's an 'id' field defined within
> the inline MXML, but I'm not sure whether it needs to be. The browser seems
> to cope okay with two elements having the same ID! but perhaps we should
> just have a usage rule where you can't include IDs within the MXML
> structure (or we change the ID to include an index, etc..)
>

you should avoid use of "id", use instead "localId".

https://stackoverflow.com/questions/55923924/whats-the-difference-between-id-and-localid-in-apache-royale

(as well think in use more SOF, so we get more exposure to other users that
wants to learn Royale but are not users of apache mailing lists)

-- 
Carlos Rovira
http://about.me/carlosrovira

RE: ComboBox list-item renderer

Posted by "Frost, Andrew" <An...@Harman.com>.
Yes that's fair enough :-)

We have one outstanding question with this, about how the Royale compiler generates the "bindings" array. In order to get this to work with a renderer defined as inline MXML (rather than as a separate MXML document), we are creating a class that implements the IMXMLDocument interface, which is great as then we have the MXML array that defines this structure and we can create multiple renderers based on this array: this part is all working fine now, so we have our custom renderer...

There's one interesting issue where there's an 'id' field defined within the inline MXML, but I'm not sure whether it needs to be. The browser seems to cope okay with two elements having the same ID! but perhaps we should just have a usage rule where you can't include IDs within the MXML structure (or we change the ID to include an index, etc..)

The outstanding problem is that the child elements aren't being filled in from the data..  the data object has been set on the new renderer object, but this isn't resulting in the child elements updating their content. The bindings within our inline MXML structure are actually being included within the main/enclosing document's binding array, which is a pain because the 'data' object is a member of the renderer rather than of the enclosing document.

So would anyone know if there is a way we can get the compiler to generate a " _bindings" array that's part of a child element's MXML definition rather than within the main class's properties? or is that not possible, and either we have to try to hack a little, or we just go with the MXML renderer being always defined in a separate class document?

thanks

   Andrew


-----Original Message-----
From: Alex Harui <ah...@adobe.com.INVALID> 
Sent: 23 July 2019 07:43
To: dev@royale.apache.org
Subject: [EXTERNAL] Re: ComboBox list-item renderer

A reminder that Royale emphasizes PAYG and has to live with DAYG (do as you go).  For PAYG reasons, the simplest ComboBox probably shouldn't have to support custom itemRenderers.  Some subclass is more than welcome to.  And I don't think anyone has done it yet so volunteers are welcome.

HTH,
-Alex

On 7/22/19, 11:12 AM, "Frost, Andrew" <An...@Harman.com> wrote:

    Thanks - yes we can try that, the issue being that we don't want all combo box lists to appear the same way hence trying to have something embedded into each bit of mxml...  
    
    
    
    We'll take a proper look and see what we can get :-)
    
    cheers
    
    
    -----Original Message-----
    From: Yishay Weiss <yi...@hotmail.com> 
    Sent: 22 July 2019 18:17
    To: dev@royale.apache.org
    Subject: [EXTERNAL] RE: ComboBox list-item renderer
    
    Note that the overridden css is of ComboBoxList, which is by default the list created in runtime, not ComboBox, which is the button that creates the list.
    
    
    
    ________________________________
    From: Yishay Weiss <yi...@hotmail.com>
    Sent: Monday, July 22, 2019 8:13:31 PM
    To: dev@royale.apache.org <de...@royale.apache.org>
    Subject: RE: ComboBox list-item renderer
    
    Actually, have you tried something like this in your css?
    
    ComboBoxList
    {
       IItemRenderer: ClassReference("com.ccc.myRenderer");
    }
    From: Yishay Weiss<ma...@hotmail.com>
    Sent: Monday, July 22, 2019 8:08 PM
    Subject: RE: ComboBox list-item renderer
    
    Oh, it looks like you're one step ahead of me. Didn't read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.
    
    From: Frost, Andrew<ma...@Harman.com>
    Sent: Monday, July 22, 2019 7:53 PM
    To: dev@royale.apache.org<ma...@royale.apache.org>
    Subject: RE: ComboBox list-item renderer
    
    Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.
    
    It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..
    
    cheers
    
    
    -----Original Message-----
    From: Yishay Weiss <yi...@hotmail.com>
    Sent: 22 July 2019 17:43
    To: dev@royale.apache.org
    Subject: [EXTERNAL] RE: ComboBox list-item renderer
    
    Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).
    
    
    
    [1] https://clicktime.symantec.com/312V9KgaR3PyjyMCjLC5wZt7Vc?u=https%3A%2F%2Fnam04.safelinks.protection.outlook.com%2F%3Furl%3Dhttps%253A%252F%252Fgithub.com%252Fapache%252Froyale-asjs%252Fblob%252Ff637c857122d56f838bab21314a11900ed0add8e%252Fexamples%252Froyale%252FTodoListSampleApp%252Fsrc%252Fmain%252Froyale%252Fsample%252Ftodo%252Fviews%252FTodoListView.mxml%2523L169%26data%3D02%257C01%257Caharui%2540adobe.com%257Cd3872c0a305540bd0c8d08d70ed0241a%257Cfa7b1b5a7b34438794aed2c178decee1%257C0%257C0%257C636994159504560528%26sdata%3DzMXZrtGppirdF8kCbxK3nO4VjQaAULy2bK2SdcXn%252FvI%253D%26reserved%3D0
    
    
    
    ________________________________
    From: Carlos Rovira <ca...@apache.org>
    Sent: Monday, July 22, 2019 6:32:27 PM
    To: dev@royale.apache.org <de...@royale.apache.org>
    Subject: Re: ComboBox list-item renderer
    
    Hi Andrew,
    
    for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:
    
    Source code in GitHub
    <https://clicktime.symantec.com/3V1EzyYJGWFnH4yatcrNfXf7Vc?u=https%3A%2F%2Fnam04.safelinks.protection.outlook.com%2F%3Furl%3Dhttps%253A%252F%252Fgithub.com%252Fapache%252Froyale-asjs%252Fblob%252Fdevelop%252Fexamples%252Froyale%252FTourDeJewel%252Fsrc%252Fmain%252Froyale%252FListPlayGround.mxml%26data%3D02%257C01%257Caharui%2540adobe.com%257Cd3872c0a305540bd0c8d08d70ed0241a%257Cfa7b1b5a7b34438794aed2c178decee1%257C0%257C0%257C636994159504560528%26sdata%3DtrSVUXGoZpSb2duv9nvXZSk9kW69g%252BaEv%252Bq6spx9d6E%253D%26reserved%3D0>
    
    <j:List id="iconList" width="200" height="300" className="
    iconListItemRenderer" labelField="label">
    
    and in iconListItemRenderer you can find
    
    .iconListItemRenderer
    {
    IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
    }
    
    but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...
    
    HTH
    
    Carlos
    
    
    El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
    escribió:
    
    > Hi again
    >
    > Just in case someone's already done this and knows already how to set 
    > it
    > up: we want to have an itemRenderer for the ListView part of a 
    > ComboBox control, i.e. when you click on the ComboBox button and it 
    > creates the ListView, we need a custom renderer. Currently it's 
    > defaulting to StringItemRenderer (from the call [1] within the default 
    > ItemRendererClassFactory), but we want it instead to use the inline 
    > MXML [2].
    >
    > I'm hoping that we can set this up by adding a bead of some sort to 
    > the ComboBox element that will tell it what item renderer to use; all 
    > the item renderer examples I can find are just using a list view 
    > directly rather than being something that's set up via a ComboBox. So 
    > far we've created a custom View for the ComboBox and we are 
    > controlling the creation of the ListView, but this creation doesn't 
    > then set up any of the MXMLDescriptor values which are needed for this to work...
    >
    > Hope that makes sense. Don't worry if not, we'll get to the bottom of 
    > it, but I wondered if someone already had done this and knew how to do 
    > it :-)
    >
    > thanks
    >
    >    Andrew
    >
    >
    >
    > [1] Current way ItemRenderClassFactory selects the item renderer:
    > if (_strand is IItemRendererProvider && (_strand as
    > IItemRendererProvider).itemRenderer) { ... } else {
    >     var itemRendererClass:Class =
    > ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class; 
    > <<<<< we're getting StringItemRenderer here
    >     if (itemRendererClass) { ... }
    >     else if (!MXMLDescriptor) { ... }
    >     <<< we want it to hit this point i.e. not get set up because it 
    > falls through and then uses the MXMLDescriptor value
    >
    > [2] Our code:
    >   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
    >     <mx:itemRenderer>
    >       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
    >         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout 
    > in here ...  </mx:HBox>
    >       </js:ItemRendererClassFactory>
    >     </mx:itemRenderer>
    >   </mx:ComboBox>
    >
    >
    >
    >
    >
    
    --
    Carlos Rovira
    https://clicktime.symantec.com/37uaR5VN2pNCL4WWL9cvXPQ7Vc?u=https%3A%2F%2Fnam04.safelinks.protection.outlook.com%2F%3Furl%3Dhttp%253A%252F%252Fabout.me%252Fcarlosrovira%26data%3D02%257C01%257Caharui%2540adobe.com%257Cd3872c0a305540bd0c8d08d70ed0241a%257Cfa7b1b5a7b34438794aed2c178decee1%257C0%257C0%257C636994159504560528%26sdata%3DXM0FOjMnt9V1F12WJgOnO3z1sP8E5%252FR7%252BtOnB1UkGmE%253D%26reserved%3D0
    
    


Re: ComboBox list-item renderer

Posted by Alex Harui <ah...@adobe.com.INVALID>.
A reminder that Royale emphasizes PAYG and has to live with DAYG (do as you go).  For PAYG reasons, the simplest ComboBox probably shouldn't have to support custom itemRenderers.  Some subclass is more than welcome to.  And I don't think anyone has done it yet so volunteers are welcome.

HTH,
-Alex

On 7/22/19, 11:12 AM, "Frost, Andrew" <An...@Harman.com> wrote:

    Thanks - yes we can try that, the issue being that we don't want all combo box lists to appear the same way hence trying to have something embedded into each bit of mxml...  
    
    
    
    We'll take a proper look and see what we can get :-)
    
    cheers
    
    
    -----Original Message-----
    From: Yishay Weiss <yi...@hotmail.com> 
    Sent: 22 July 2019 18:17
    To: dev@royale.apache.org
    Subject: [EXTERNAL] RE: ComboBox list-item renderer
    
    Note that the overridden css is of ComboBoxList, which is by default the list created in runtime, not ComboBox, which is the button that creates the list.
    
    
    
    ________________________________
    From: Yishay Weiss <yi...@hotmail.com>
    Sent: Monday, July 22, 2019 8:13:31 PM
    To: dev@royale.apache.org <de...@royale.apache.org>
    Subject: RE: ComboBox list-item renderer
    
    Actually, have you tried something like this in your css?
    
    ComboBoxList
    {
       IItemRenderer: ClassReference("com.ccc.myRenderer");
    }
    From: Yishay Weiss<ma...@hotmail.com>
    Sent: Monday, July 22, 2019 8:08 PM
    Subject: RE: ComboBox list-item renderer
    
    Oh, it looks like you're one step ahead of me. Didn't read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.
    
    From: Frost, Andrew<ma...@Harman.com>
    Sent: Monday, July 22, 2019 7:53 PM
    To: dev@royale.apache.org<ma...@royale.apache.org>
    Subject: RE: ComboBox list-item renderer
    
    Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.
    
    It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..
    
    cheers
    
    
    -----Original Message-----
    From: Yishay Weiss <yi...@hotmail.com>
    Sent: 22 July 2019 17:43
    To: dev@royale.apache.org
    Subject: [EXTERNAL] RE: ComboBox list-item renderer
    
    Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).
    
    
    
    [1] https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169&amp;data=02%7C01%7Caharui%40adobe.com%7Cd3872c0a305540bd0c8d08d70ed0241a%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636994159504560528&amp;sdata=zMXZrtGppirdF8kCbxK3nO4VjQaAULy2bK2SdcXn%2FvI%3D&amp;reserved=0
    
    
    
    ________________________________
    From: Carlos Rovira <ca...@apache.org>
    Sent: Monday, July 22, 2019 6:32:27 PM
    To: dev@royale.apache.org <de...@royale.apache.org>
    Subject: Re: ComboBox list-item renderer
    
    Hi Andrew,
    
    for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:
    
    Source code in GitHub
    <https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml&amp;data=02%7C01%7Caharui%40adobe.com%7Cd3872c0a305540bd0c8d08d70ed0241a%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636994159504560528&amp;sdata=trSVUXGoZpSb2duv9nvXZSk9kW69g%2BaEv%2Bq6spx9d6E%3D&amp;reserved=0>
    
    <j:List id="iconList" width="200" height="300" className="
    iconListItemRenderer" labelField="label">
    
    and in iconListItemRenderer you can find
    
    .iconListItemRenderer
    {
    IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
    }
    
    but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...
    
    HTH
    
    Carlos
    
    
    El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
    escribió:
    
    > Hi again
    >
    > Just in case someone's already done this and knows already how to set 
    > it
    > up: we want to have an itemRenderer for the ListView part of a 
    > ComboBox control, i.e. when you click on the ComboBox button and it 
    > creates the ListView, we need a custom renderer. Currently it's 
    > defaulting to StringItemRenderer (from the call [1] within the default 
    > ItemRendererClassFactory), but we want it instead to use the inline 
    > MXML [2].
    >
    > I'm hoping that we can set this up by adding a bead of some sort to 
    > the ComboBox element that will tell it what item renderer to use; all 
    > the item renderer examples I can find are just using a list view 
    > directly rather than being something that's set up via a ComboBox. So 
    > far we've created a custom View for the ComboBox and we are 
    > controlling the creation of the ListView, but this creation doesn't 
    > then set up any of the MXMLDescriptor values which are needed for this to work...
    >
    > Hope that makes sense. Don't worry if not, we'll get to the bottom of 
    > it, but I wondered if someone already had done this and knew how to do 
    > it :-)
    >
    > thanks
    >
    >    Andrew
    >
    >
    >
    > [1] Current way ItemRenderClassFactory selects the item renderer:
    > if (_strand is IItemRendererProvider && (_strand as
    > IItemRendererProvider).itemRenderer) { ... } else {
    >     var itemRendererClass:Class =
    > ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class; 
    > <<<<< we're getting StringItemRenderer here
    >     if (itemRendererClass) { ... }
    >     else if (!MXMLDescriptor) { ... }
    >     <<< we want it to hit this point i.e. not get set up because it 
    > falls through and then uses the MXMLDescriptor value
    >
    > [2] Our code:
    >   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
    >     <mx:itemRenderer>
    >       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
    >         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout 
    > in here ...  </mx:HBox>
    >       </js:ItemRendererClassFactory>
    >     </mx:itemRenderer>
    >   </mx:ComboBox>
    >
    >
    >
    >
    >
    
    --
    Carlos Rovira
    https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fabout.me%2Fcarlosrovira&amp;data=02%7C01%7Caharui%40adobe.com%7Cd3872c0a305540bd0c8d08d70ed0241a%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636994159504560528&amp;sdata=XM0FOjMnt9V1F12WJgOnO3z1sP8E5%2FR7%2BtOnB1UkGmE%3D&amp;reserved=0
    
    


RE: ComboBox list-item renderer

Posted by "Frost, Andrew" <An...@Harman.com>.
Thanks - yes we can try that, the issue being that we don't want all combo box lists to appear the same way hence trying to have something embedded into each bit of mxml...  



We'll take a proper look and see what we can get :-)

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com> 
Sent: 22 July 2019 18:17
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Note that the overridden css is of ComboBoxList, which is by default the list created in runtime, not ComboBox, which is the button that creates the list.



________________________________
From: Yishay Weiss <yi...@hotmail.com>
Sent: Monday, July 22, 2019 8:13:31 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Actually, have you tried something like this in your css?

ComboBoxList
{
   IItemRenderer: ClassReference("com.ccc.myRenderer");
}
From: Yishay Weiss<ma...@hotmail.com>
Sent: Monday, July 22, 2019 8:08 PM
Subject: RE: ComboBox list-item renderer

Oh, it looks like you're one step ahead of me. Didn't read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.

From: Frost, Andrew<ma...@Harman.com>
Sent: Monday, July 22, 2019 7:53 PM
To: dev@royale.apache.org<ma...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.

It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com>
Sent: 22 July 2019 17:43
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:

Source code in GitHub
<https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set 
> it
> up: we want to have an itemRenderer for the ListView part of a 
> ComboBox control, i.e. when you click on the ComboBox button and it 
> creates the ListView, we need a custom renderer. Currently it's 
> defaulting to StringItemRenderer (from the call [1] within the default 
> ItemRendererClassFactory), but we want it instead to use the inline 
> MXML [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to 
> the ComboBox element that will tell it what item renderer to use; all 
> the item renderer examples I can find are just using a list view 
> directly rather than being something that's set up via a ComboBox. So 
> far we've created a custom View for the ComboBox and we are 
> controlling the creation of the ListView, but this creation doesn't 
> then set up any of the MXMLDescriptor values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of 
> it, but I wondered if someone already had done this and knew how to do 
> it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... } else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class; 
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it 
> falls through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout 
> in here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira


RE: ComboBox list-item renderer

Posted by Yishay Weiss <yi...@hotmail.com>.
Note that the overridden css is of ComboBoxList, which is by default the list created in runtime, not ComboBox, which is the button that creates the list.



________________________________
From: Yishay Weiss <yi...@hotmail.com>
Sent: Monday, July 22, 2019 8:13:31 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Actually, have you tried something like this in your css?

ComboBoxList
{
   IItemRenderer: ClassReference("com.ccc.myRenderer");
}
From: Yishay Weiss<ma...@hotmail.com>
Sent: Monday, July 22, 2019 8:08 PM
Subject: RE: ComboBox list-item renderer

Oh, it looks like you’re one step ahead of me. Didn’t read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.

From: Frost, Andrew<ma...@Harman.com>
Sent: Monday, July 22, 2019 7:53 PM
To: dev@royale.apache.org<ma...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.

It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com>
Sent: 22 July 2019 17:43
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:

Source code in GitHub
<https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set
> it
> up: we want to have an itemRenderer for the ListView part of a
> ComboBox control, i.e. when you click on the ComboBox button and it
> creates the ListView, we need a custom renderer. Currently it's
> defaulting to StringItemRenderer (from the call [1] within the default
> ItemRendererClassFactory), but we want it instead to use the inline
> MXML [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to
> the ComboBox element that will tell it what item renderer to use; all
> the item renderer examples I can find are just using a list view
> directly rather than being something that's set up via a ComboBox. So
> far we've created a custom View for the ComboBox and we are
> controlling the creation of the ListView, but this creation doesn't
> then set up any of the MXMLDescriptor values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of
> it, but I wondered if someone already had done this and knew how to do
> it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... } else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it
> falls through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout
> in here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira


RE: ComboBox list-item renderer

Posted by Yishay Weiss <yi...@hotmail.com>.
Actually, have you tried something like this in your css?

ComboBoxList
{
   IItemRenderer: ClassReference("com.ccc.myRenderer");
}
From: Yishay Weiss<ma...@hotmail.com>
Sent: Monday, July 22, 2019 8:08 PM
Subject: RE: ComboBox list-item renderer

Oh, it looks like you’re one step ahead of me. Didn’t read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.

From: Frost, Andrew<ma...@Harman.com>
Sent: Monday, July 22, 2019 7:53 PM
To: dev@royale.apache.org<ma...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.

It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com>
Sent: 22 July 2019 17:43
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:

Source code in GitHub
<https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set
> it
> up: we want to have an itemRenderer for the ListView part of a
> ComboBox control, i.e. when you click on the ComboBox button and it
> creates the ListView, we need a custom renderer. Currently it's
> defaulting to StringItemRenderer (from the call [1] within the default
> ItemRendererClassFactory), but we want it instead to use the inline
> MXML [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to
> the ComboBox element that will tell it what item renderer to use; all
> the item renderer examples I can find are just using a list view
> directly rather than being something that's set up via a ComboBox. So
> far we've created a custom View for the ComboBox and we are
> controlling the creation of the ListView, but this creation doesn't
> then set up any of the MXMLDescriptor values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of
> it, but I wondered if someone already had done this and knew how to do
> it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... } else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it
> falls through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout
> in here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira


RE: ComboBox list-item renderer

Posted by Yishay Weiss <yi...@hotmail.com>.
Oh, it looks like you’re one step ahead of me. Didn’t read your mail carefully enough. I think you can safely open a bug, or try to write the bead yourself.

From: Frost, Andrew<ma...@Harman.com>
Sent: Monday, July 22, 2019 7:53 PM
To: dev@royale.apache.org<ma...@royale.apache.org>
Subject: RE: ComboBox list-item renderer

Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.

It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com>
Sent: 22 July 2019 17:43
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:

Source code in GitHub
<https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set
> it
> up: we want to have an itemRenderer for the ListView part of a
> ComboBox control, i.e. when you click on the ComboBox button and it
> creates the ListView, we need a custom renderer. Currently it's
> defaulting to StringItemRenderer (from the call [1] within the default
> ItemRendererClassFactory), but we want it instead to use the inline
> MXML [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to
> the ComboBox element that will tell it what item renderer to use; all
> the item renderer examples I can find are just using a list view
> directly rather than being something that's set up via a ComboBox. So
> far we've created a custom View for the ComboBox and we are
> controlling the creation of the ListView, but this creation doesn't
> then set up any of the MXMLDescriptor values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of
> it, but I wondered if someone already had done this and knew how to do
> it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... } else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it
> falls through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout
> in here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira


RE: ComboBox list-item renderer

Posted by "Frost, Andrew" <An...@Harman.com>.
Thanks - yes, happy to adjust our code to that sort of format, but we continue to hit the issue that this is a renderer for a list, being set on the list, and we want to have a renderer for the list that's being created at runtime from the combo box.

It might be that we can set the itemRenderer property of the list object as it's created by the combo box's view object, but this feels a little hacky and it would be nicer if we could accomplish this just via MXML or CSS..

cheers


-----Original Message-----
From: Yishay Weiss <yi...@hotmail.com> 
Sent: 22 July 2019 17:43
To: dev@royale.apache.org
Subject: [EXTERNAL] RE: ComboBox list-item renderer

Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://clicktime.symantec.com/3L6uXLP6wp93RxE1KiZmGxT7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Ff637c857122d56f838bab21314a11900ed0add8e%2Fexamples%2Froyale%2FTodoListSampleApp%2Fsrc%2Fmain%2Froyale%2Fsample%2Ftodo%2Fviews%2FTodoListView.mxml%23L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de jewel for List we do:

Source code in GitHub
<https://clicktime.symantec.com/3FLJQLf6LAcXdburoPNGbpg7Vc?u=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fblob%2Fdevelop%2Fexamples%2Froyale%2FTourDeJewel%2Fsrc%2Fmain%2Froyale%2FListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set 
> it
> up: we want to have an itemRenderer for the ListView part of a 
> ComboBox control, i.e. when you click on the ComboBox button and it 
> creates the ListView, we need a custom renderer. Currently it's 
> defaulting to StringItemRenderer (from the call [1] within the default 
> ItemRendererClassFactory), but we want it instead to use the inline 
> MXML [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to 
> the ComboBox element that will tell it what item renderer to use; all 
> the item renderer examples I can find are just using a list view 
> directly rather than being something that's set up via a ComboBox. So 
> far we've created a custom View for the ComboBox and we are 
> controlling the creation of the ListView, but this creation doesn't 
> then set up any of the MXMLDescriptor values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of 
> it, but I wondered if someone already had done this and knew how to do 
> it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... } else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class; 
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it 
> falls through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout 
> in here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
https://clicktime.symantec.com/36TqgNnCHwLbyQEjPaEJeg57Vc?u=http%3A%2F%2Fabout.me%2Fcarlosrovira

RE: ComboBox list-item renderer

Posted by Yishay Weiss <yi...@hotmail.com>.
Another option is to specify the renderer class as an mxml att [1]. ItemRenderers are not beads, so adding them to the beads list has no effect (it should actually cause an RTE).



[1] https://github.com/apache/royale-asjs/blob/f637c857122d56f838bab21314a11900ed0add8e/examples/royale/TodoListSampleApp/src/main/royale/sample/todo/views/TodoListView.mxml#L169



________________________________
From: Carlos Rovira <ca...@apache.org>
Sent: Monday, July 22, 2019 6:32:27 PM
To: dev@royale.apache.org <de...@royale.apache.org>
Subject: Re: ComboBox list-item renderer

Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de
jewel for List we do:

Source code in GitHub
<https://github.com/apache/royale-asjs/blob/develop/examples/royale/TourDeJewel/src/main/royale/ListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work
it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set it
> up: we want to have an itemRenderer for the ListView part of a ComboBox
> control, i.e. when you click on the ComboBox button and it creates the
> ListView, we need a custom renderer. Currently it's defaulting to
> StringItemRenderer (from the call [1] within the default
> ItemRendererClassFactory), but we want it instead to use the inline MXML
> [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to the
> ComboBox element that will tell it what item renderer to use; all the item
> renderer examples I can find are just using a list view directly rather
> than being something that's set up via a ComboBox. So far we've created a
> custom View for the ComboBox and we are controlling the creation of the
> ListView, but this creation doesn't then set up any of the MXMLDescriptor
> values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of it,
> but I wondered if someone already had done this and knew how to do it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... }
> else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it falls
> through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout in
> here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

--
Carlos Rovira
http://about.me/carlosrovira

Re: ComboBox list-item renderer

Posted by Carlos Rovira <ca...@apache.org>.
Hi Andrew,

for this one in Royale it use to be done in CSS. For example in tour de
jewel for List we do:

Source code in GitHub
<https://github.com/apache/royale-asjs/blob/develop/examples/royale/TourDeJewel/src/main/royale/ListPlayGround.mxml>

<j:List id="iconList" width="200" height="300" className="
iconListItemRenderer" labelField="label">

and in iconListItemRenderer you can find

.iconListItemRenderer
{
IItemRenderer: ClassReference("itemRenderers.IconListItemRenderer");
}

but as well we should can do as inline in MXML, so if that does not work
it's a bug to solve I think...

HTH

Carlos


El lun., 22 jul. 2019 a las 17:14, Frost, Andrew (<An...@harman.com>)
escribió:

> Hi again
>
> Just in case someone's already done this and knows already how to set it
> up: we want to have an itemRenderer for the ListView part of a ComboBox
> control, i.e. when you click on the ComboBox button and it creates the
> ListView, we need a custom renderer. Currently it's defaulting to
> StringItemRenderer (from the call [1] within the default
> ItemRendererClassFactory), but we want it instead to use the inline MXML
> [2].
>
> I'm hoping that we can set this up by adding a bead of some sort to the
> ComboBox element that will tell it what item renderer to use; all the item
> renderer examples I can find are just using a list view directly rather
> than being something that's set up via a ComboBox. So far we've created a
> custom View for the ComboBox and we are controlling the creation of the
> ListView, but this creation doesn't then set up any of the MXMLDescriptor
> values which are needed for this to work...
>
> Hope that makes sense. Don't worry if not, we'll get to the bottom of it,
> but I wondered if someone already had done this and knew how to do it :-)
>
> thanks
>
>    Andrew
>
>
>
> [1] Current way ItemRenderClassFactory selects the item renderer:
> if (_strand is IItemRendererProvider && (_strand as
> IItemRendererProvider).itemRenderer) { ... }
> else {
>     var itemRendererClass:Class =
> ValuesManager.valuesImpl.getValue(_strand, "iItemRenderer") as Class;
> <<<<< we're getting StringItemRenderer here
>     if (itemRendererClass) { ... }
>     else if (!MXMLDescriptor) { ... }
>     <<< we want it to hit this point i.e. not get set up because it falls
> through and then uses the MXMLDescriptor value
>
> [2] Our code:
>   <mx:ComboBox width="100" dataProvider="{val}" labelField="subval1">
>     <mx:itemRenderer>
>       <js:ItemRendererClassFactory>  <<<< was "fx:Component"
>         <mx:HBox width="100%" horizontalScrollPolicy="off"> ... layout in
> here ...  </mx:HBox>
>       </js:ItemRendererClassFactory>
>     </mx:itemRenderer>
>   </mx:ComboBox>
>
>
>
>
>

-- 
Carlos Rovira
http://about.me/carlosrovira