You are viewing a plain text version of this content. The canonical link for it is here.
Posted to jdo-dev@db.apache.org by "Matthew T. Adams" <ma...@xcalia.com> on 2005/12/31 01:32:26 UTC
You can now debug tck20!
There are now two new targets in trunk/tck20/maven.xml that cause the forked
JVM to include debugging arguments: debugtck.jdori and debugtck.iut.
They're simply convenience goals that set simply set the property
"jdo.tck.debug.jvmargs" if it's not set, then attain the runtck.jdori or
runtck.iut, respectively, which are now sensitive to jdo.tck.debug.jvmargs.
The default debug transport is dt_socket. For convenience, if you do not
set a port, the default is 8787, but you can set the port via the property
"jdo.tck.debug.port". So, for example, to debug a configuration of your
choice, in any IDE you like, simply exec on the command line
maven -Djdo.tck.cfglist=detach.conf debugtck.jdori
Wait for the message that the JVM is waiting for a debugger to attach, then
attach your IDE to the port given using dt_socket transport. If you want to
set the port, execute
maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.port=7859 debugtck.jdori
If you want to control the entire set of debug jvm arguments, execute
maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.jvmargs="-Xdebug
-Xnoagent ..." runtck.jdori
You can also use the target debugtck.jdori instead of runtck.jdori, but
it'll just end up calling runtck.jdori.
I hope this helps everyone out!
--matthew
Matthew T. Adams
Corporate Technical Advisor & Senior Consultant
Mobile: +1 253 732 1051
Phone: +1 206 331 3833
Fax: +1 815 331 0952
matthew.adams@xcalia.com
P.O. Box 24163
Federal Way, WA 98093
www.xcalia.com
Xcalia makes implementing SOA easy with agile business intermediation
software that combines heterogeneous data with services to easily develop
and deploy transactional composite applications. Enterprises can quickly
respond to changing business requirements and dramatically reduce the costs
of data access and service integration.
Re: You can now debug tck20!
Posted by Michael Bouschen <mb...@spree.de>.
Hi Matthew,
thanks for checkin it in.
Regards Michael
>Hi Michael,
>
>Cool, that sounds fine. I was running out of time when I finished that; I
>knew it was redundant. Thanks for finishing it up!
>
>--matthew
>
>
>
>>-----Original Message-----
>>From: Michael Bouschen [mailto:mbo.tech@spree.de]
>>Sent: Sunday, January 01, 2006 1:40 PM
>>To: jdo-dev@db.apache.org
>>Subject: Re: You can now debug tck20!
>>
>>
>>Hi Matthew,
>>
>>thanks for adding debug support to maven.xml, this is great!
>>
>>I would like to propose two improvements:
>>- I always get a message "JVM will wait until debugger
>>attaches on port
>>..." even if I call runtck.jdori. I think the check whether property
>>debugJvmargs is set needs to use the empty operator instead of
>>comparing
>>!= ''
>> <j:if test="${not empty debugJvmargs}">
>>- I noticed the goals debugtck.iut and debugtck.jdori use the
>>same code
>>to set the debug properties. I refactored the goals and added
>>a separate
>>goal setDebugProps managing the debug properties.
>>
>>You find a patch attached. Please give it a try and let me
>>know what you
>>think.
>>
>>Regards Michael
>>
>>
>>
>>>There are now two new targets in trunk/tck20/maven.xml that
>>>
>>>
>>cause the forked
>>
>>
>>>JVM to include debugging arguments: debugtck.jdori and debugtck.iut.
>>>They're simply convenience goals that set simply set the property
>>>"jdo.tck.debug.jvmargs" if it's not set, then attain the
>>>
>>>
>>runtck.jdori or
>>
>>
>>>runtck.iut, respectively, which are now sensitive to
>>>
>>>
>>jdo.tck.debug.jvmargs.
>>
>>
>>>The default debug transport is dt_socket. For convenience,
>>>
>>>
>>if you do not
>>
>>
>>>set a port, the default is 8787, but you can set the port via
>>>
>>>
>>the property
>>
>>
>>>"jdo.tck.debug.port". So, for example, to debug a
>>>
>>>
>>configuration of your
>>
>>
>>>choice, in any IDE you like, simply exec on the command line
>>>
>>>maven -Djdo.tck.cfglist=detach.conf debugtck.jdori
>>>
>>>Wait for the message that the JVM is waiting for a debugger
>>>
>>>
>>to attach, then
>>
>>
>>>attach your IDE to the port given using dt_socket transport.
>>>
>>>
>>If you want to
>>
>>
>>>set the port, execute
>>>
>>>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.port=7859
>>>
>>>
>>debugtck.jdori
>>
>>
>>>If you want to control the entire set of debug jvm arguments, execute
>>>
>>>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.jvmargs="-Xdebug
>>>-Xnoagent ..." runtck.jdori
>>>
>>>You can also use the target debugtck.jdori instead of
>>>
>>>
>>runtck.jdori, but
>>
>>
>>>it'll just end up calling runtck.jdori.
>>>
>>>I hope this helps everyone out!
>>>
>>>--matthew
>>>
>>>
>>>
>>>Matthew T. Adams
>>>Corporate Technical Advisor & Senior Consultant
>>>Mobile: +1 253 732 1051
>>>Phone: +1 206 331 3833
>>>Fax: +1 815 331 0952
>>>matthew.adams@xcalia.com
>>>P.O. Box 24163
>>>Federal Way, WA 98093
>>>www.xcalia.com
>>>
>>>
>>>
>>>Xcalia makes implementing SOA easy with agile business intermediation
>>>software that combines heterogeneous data with services to
>>>
>>>
>>easily develop
>>
>>
>>>and deploy transactional composite applications. Enterprises
>>>
>>>
>>can quickly
>>
>>
>>>respond to changing business requirements and dramatically
>>>
>>>
>>reduce the costs
>>
>>
>>>of data access and service integration.
>>>
>>>
>>>
>>>
>>>
>>--
>>Michael Bouschen Tech@Spree Engineering GmbH
>>mailto:mbo.tech@spree.de http://www.tech.spree.de/
>>Tel.:++49/30/235 520-33 Buelowstr. 66
>>Fax.:++49/30/2175 2012 D-10783 Berlin
>>
>>
>>
>>
>
>
>
--
Michael Bouschen Tech@Spree Engineering GmbH
mailto:mbo.tech@spree.de http://www.tech.spree.de/
Tel.:++49/30/235 520-33 Buelowstr. 66
Fax.:++49/30/2175 2012 D-10783 Berlin
RE: You can now debug tck20!
Posted by "Matthew T. Adams" <ma...@xcalia.com>.
Hi Michael,
Cool, that sounds fine. I was running out of time when I finished that; I
knew it was redundant. Thanks for finishing it up!
--matthew
>-----Original Message-----
>From: Michael Bouschen [mailto:mbo.tech@spree.de]
>Sent: Sunday, January 01, 2006 1:40 PM
>To: jdo-dev@db.apache.org
>Subject: Re: You can now debug tck20!
>
>
>Hi Matthew,
>
>thanks for adding debug support to maven.xml, this is great!
>
>I would like to propose two improvements:
>- I always get a message "JVM will wait until debugger
>attaches on port
>..." even if I call runtck.jdori. I think the check whether property
>debugJvmargs is set needs to use the empty operator instead of
>comparing
>!= ''
> <j:if test="${not empty debugJvmargs}">
>- I noticed the goals debugtck.iut and debugtck.jdori use the
>same code
>to set the debug properties. I refactored the goals and added
>a separate
>goal setDebugProps managing the debug properties.
>
>You find a patch attached. Please give it a try and let me
>know what you
>think.
>
>Regards Michael
>
>>There are now two new targets in trunk/tck20/maven.xml that
>cause the forked
>>JVM to include debugging arguments: debugtck.jdori and debugtck.iut.
>>They're simply convenience goals that set simply set the property
>>"jdo.tck.debug.jvmargs" if it's not set, then attain the
>runtck.jdori or
>>runtck.iut, respectively, which are now sensitive to
>jdo.tck.debug.jvmargs.
>>
>>The default debug transport is dt_socket. For convenience,
>if you do not
>>set a port, the default is 8787, but you can set the port via
>the property
>>"jdo.tck.debug.port". So, for example, to debug a
>configuration of your
>>choice, in any IDE you like, simply exec on the command line
>>
>>maven -Djdo.tck.cfglist=detach.conf debugtck.jdori
>>
>>Wait for the message that the JVM is waiting for a debugger
>to attach, then
>>attach your IDE to the port given using dt_socket transport.
>If you want to
>>set the port, execute
>>
>>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.port=7859
>debugtck.jdori
>>
>>If you want to control the entire set of debug jvm arguments, execute
>>
>>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.jvmargs="-Xdebug
>>-Xnoagent ..." runtck.jdori
>>
>>You can also use the target debugtck.jdori instead of
>runtck.jdori, but
>>it'll just end up calling runtck.jdori.
>>
>>I hope this helps everyone out!
>>
>>--matthew
>>
>>
>>
>>Matthew T. Adams
>>Corporate Technical Advisor & Senior Consultant
>>Mobile: +1 253 732 1051
>>Phone: +1 206 331 3833
>>Fax: +1 815 331 0952
>>matthew.adams@xcalia.com
>>P.O. Box 24163
>>Federal Way, WA 98093
>>www.xcalia.com
>>
>>
>>
>>Xcalia makes implementing SOA easy with agile business intermediation
>>software that combines heterogeneous data with services to
>easily develop
>>and deploy transactional composite applications. Enterprises
>can quickly
>>respond to changing business requirements and dramatically
>reduce the costs
>>of data access and service integration.
>>
>>
>>
>
>
>--
>Michael Bouschen Tech@Spree Engineering GmbH
>mailto:mbo.tech@spree.de http://www.tech.spree.de/
>Tel.:++49/30/235 520-33 Buelowstr. 66
>Fax.:++49/30/2175 2012 D-10783 Berlin
>
>
Re: You can now debug tck20!
Posted by Michael Bouschen <mb...@spree.de>.
Hi Matthew,
thanks for adding debug support to maven.xml, this is great!
I would like to propose two improvements:
- I always get a message "JVM will wait until debugger attaches on port
..." even if I call runtck.jdori. I think the check whether property
debugJvmargs is set needs to use the empty operator instead of comparing
!= ''
<j:if test="${not empty debugJvmargs}">
- I noticed the goals debugtck.iut and debugtck.jdori use the same code
to set the debug properties. I refactored the goals and added a separate
goal setDebugProps managing the debug properties.
You find a patch attached. Please give it a try and let me know what you
think.
Regards Michael
>There are now two new targets in trunk/tck20/maven.xml that cause the forked
>JVM to include debugging arguments: debugtck.jdori and debugtck.iut.
>They're simply convenience goals that set simply set the property
>"jdo.tck.debug.jvmargs" if it's not set, then attain the runtck.jdori or
>runtck.iut, respectively, which are now sensitive to jdo.tck.debug.jvmargs.
>
>The default debug transport is dt_socket. For convenience, if you do not
>set a port, the default is 8787, but you can set the port via the property
>"jdo.tck.debug.port". So, for example, to debug a configuration of your
>choice, in any IDE you like, simply exec on the command line
>
>maven -Djdo.tck.cfglist=detach.conf debugtck.jdori
>
>Wait for the message that the JVM is waiting for a debugger to attach, then
>attach your IDE to the port given using dt_socket transport. If you want to
>set the port, execute
>
>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.port=7859 debugtck.jdori
>
>If you want to control the entire set of debug jvm arguments, execute
>
>maven -Djdo.tck.cfglist=detach.conf -Djdo.tck.debug.jvmargs="-Xdebug
>-Xnoagent ..." runtck.jdori
>
>You can also use the target debugtck.jdori instead of runtck.jdori, but
>it'll just end up calling runtck.jdori.
>
>I hope this helps everyone out!
>
>--matthew
>
>
>
>Matthew T. Adams
>Corporate Technical Advisor & Senior Consultant
>Mobile: +1 253 732 1051
>Phone: +1 206 331 3833
>Fax: +1 815 331 0952
>matthew.adams@xcalia.com
>P.O. Box 24163
>Federal Way, WA 98093
>www.xcalia.com
>
>
>
>Xcalia makes implementing SOA easy with agile business intermediation
>software that combines heterogeneous data with services to easily develop
>and deploy transactional composite applications. Enterprises can quickly
>respond to changing business requirements and dramatically reduce the costs
>of data access and service integration.
>
>
>
--
Michael Bouschen Tech@Spree Engineering GmbH
mailto:mbo.tech@spree.de http://www.tech.spree.de/
Tel.:++49/30/235 520-33 Buelowstr. 66
Fax.:++49/30/2175 2012 D-10783 Berlin