You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@mynewt.apache.org by cc...@apache.org on 2016/11/08 04:52:03 UTC
[2/3] incubator-mynewt-core git commit: Move startup code back into
BSP pgks (from MCU).
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52.s
----------------------------------------------------------------------
diff --git a/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52.s b/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52.s
new file mode 100755
index 0000000..fb804fd
--- /dev/null
+++ b/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52.s
@@ -0,0 +1,289 @@
+/*
+Copyright (c) 2015, Nordic Semiconductor ASA
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+* Neither the name of Nordic Semiconductor ASA nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+NOTE: Template files (including this one) are application specific and therefore
+expected to be copied into the application project folder prior to its use!
+*/
+
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+ .equ Stack_Size, 432
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External Interrupts */
+ .long POWER_CLOCK_IRQHandler
+ .long RADIO_IRQHandler
+ .long UARTE0_UART0_IRQHandler
+ .long SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler
+ .long SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler
+ .long NFCT_IRQHandler
+ .long GPIOTE_IRQHandler
+ .long SAADC_IRQHandler
+ .long TIMER0_IRQHandler
+ .long TIMER1_IRQHandler
+ .long TIMER2_IRQHandler
+ .long RTC0_IRQHandler
+ .long TEMP_IRQHandler
+ .long RNG_IRQHandler
+ .long ECB_IRQHandler
+ .long CCM_AAR_IRQHandler
+ .long WDT_IRQHandler
+ .long RTC1_IRQHandler
+ .long QDEC_IRQHandler
+ .long COMP_LPCOMP_IRQHandler
+ .long SWI0_EGU0_IRQHandler
+ .long SWI1_EGU1_IRQHandler
+ .long SWI2_EGU2_IRQHandler
+ .long SWI3_EGU3_IRQHandler
+ .long SWI4_EGU4_IRQHandler
+ .long SWI5_EGU5_IRQHandler
+ .long TIMER3_IRQHandler
+ .long TIMER4_IRQHandler
+ .long PWM0_IRQHandler
+ .long PDM_IRQHandler
+ .long 0 /*Reserved */
+ .long 0 /*Reserved */
+ .long MWU_IRQHandler
+ .long PWM1_IRQHandler
+ .long PWM2_IRQHandler
+ .long SPIM2_SPIS2_SPI2_IRQHandler
+ .long RTC2_IRQHandler
+ .long I2S_IRQHandler
+
+ .size __isr_vector, . - __isr_vector
+
+/* Reset Handler */
+
+ .text
+ .thumb
+ .thumb_func
+ .align 1
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ .fnstart
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+ subs r3, r2
+ ble .LC0
+
+.LC1:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC1
+
+.LC0:
+
+ LDR R0, =__HeapBase
+ LDR R1, =__HeapLimit
+ BL _sbrkInit
+
+ LDR R0, =SystemInit
+ BLX R0
+
+ LDR R0, =_start
+ BX R0
+
+ .pool
+ .cantunwind
+ .fnend
+ .size Reset_Handler,.-Reset_Handler
+
+ .section ".text"
+
+
+/* Dummy Exception Handlers (infinite loops which can be modified) */
+
+ .weak NMI_Handler
+ .type NMI_Handler, %function
+NMI_Handler:
+ B .
+ .size NMI_Handler, . - NMI_Handler
+
+
+ .weak HardFault_Handler
+ .type HardFault_Handler, %function
+HardFault_Handler:
+ B .
+ .size HardFault_Handler, . - HardFault_Handler
+
+
+ .weak MemoryManagement_Handler
+ .type MemoryManagement_Handler, %function
+MemoryManagement_Handler:
+ B .
+ .size MemoryManagement_Handler, . - MemoryManagement_Handler
+
+
+ .weak BusFault_Handler
+ .type BusFault_Handler, %function
+BusFault_Handler:
+ B .
+ .size BusFault_Handler, . - BusFault_Handler
+
+
+ .weak UsageFault_Handler
+ .type UsageFault_Handler, %function
+UsageFault_Handler:
+ B .
+ .size UsageFault_Handler, . - UsageFault_Handler
+
+
+ .weak SVC_Handler
+ .type SVC_Handler, %function
+SVC_Handler:
+ B .
+ .size SVC_Handler, . - SVC_Handler
+
+
+ .weak PendSV_Handler
+ .type PendSV_Handler, %function
+PendSV_Handler:
+ B .
+ .size PendSV_Handler, . - PendSV_Handler
+
+
+ .weak SysTick_Handler
+ .type SysTick_Handler, %function
+SysTick_Handler:
+ B .
+ .size SysTick_Handler, . - SysTick_Handler
+
+
+/* IRQ Handlers */
+
+ .globl Default_Handler
+ .type Default_Handler, %function
+Default_Handler:
+ B .
+ .size Default_Handler, . - Default_Handler
+
+ .macro IRQ handler
+ .weak \handler
+ .set \handler, Default_Handler
+ .endm
+
+ IRQ POWER_CLOCK_IRQHandler
+ IRQ RADIO_IRQHandler
+ IRQ UARTE0_UART0_IRQHandler
+ IRQ SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler
+ IRQ SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler
+ IRQ NFCT_IRQHandler
+ IRQ GPIOTE_IRQHandler
+ IRQ SAADC_IRQHandler
+ IRQ TIMER0_IRQHandler
+ IRQ TIMER1_IRQHandler
+ IRQ TIMER2_IRQHandler
+ IRQ RTC0_IRQHandler
+ IRQ TEMP_IRQHandler
+ IRQ RNG_IRQHandler
+ IRQ ECB_IRQHandler
+ IRQ CCM_AAR_IRQHandler
+ IRQ WDT_IRQHandler
+ IRQ RTC1_IRQHandler
+ IRQ QDEC_IRQHandler
+ IRQ COMP_LPCOMP_IRQHandler
+ IRQ SWI0_EGU0_IRQHandler
+ IRQ SWI1_EGU1_IRQHandler
+ IRQ SWI2_EGU2_IRQHandler
+ IRQ SWI3_EGU3_IRQHandler
+ IRQ SWI4_EGU4_IRQHandler
+ IRQ SWI5_EGU5_IRQHandler
+ IRQ TIMER3_IRQHandler
+ IRQ TIMER4_IRQHandler
+ IRQ PWM0_IRQHandler
+ IRQ PDM_IRQHandler
+ IRQ MWU_IRQHandler
+ IRQ PWM1_IRQHandler
+ IRQ PWM2_IRQHandler
+ IRQ SPIM2_SPIS2_SPI2_IRQHandler
+ IRQ RTC2_IRQHandler
+ IRQ I2S_IRQHandler
+
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52_split.s
----------------------------------------------------------------------
diff --git a/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52_split.s b/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52_split.s
new file mode 100755
index 0000000..7426848
--- /dev/null
+++ b/hw/bsp/nrf52dk/src/arch/cortex_m4/gcc_startup_nrf52_split.s
@@ -0,0 +1,150 @@
+/*
+Copyright (c) 2015, Nordic Semiconductor ASA
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+* Neither the name of Nordic Semiconductor ASA nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+NOTE: Template files (including this one) are application specific and therefore
+expected to be copied into the application project folder prior to its use!
+*/
+
+ .syntax unified
+ .arch armv7-m
+ .section .stack
+ .align 3
+ .equ Stack_Size, 432
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector_split
+ .align 2
+ .globl __isr_vector_split
+__isr_vector_split:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler_split /* Reset Handler */
+
+ .size __isr_vector_split, . - __isr_vector_split
+
+/* Reset Handler */
+
+ .text
+ .thumb
+ .thumb_func
+ .align 1
+ .globl Reset_Handler_split
+ .type Reset_Handler_split, %function
+Reset_Handler_split:
+ .fnstart
+
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+ subs r3, r2
+ ble .LC0
+
+.LC1:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC1
+
+.LC0:
+ ldr r1, =__etext_loader
+ ldr r2, =__data_start___loader
+ ldr r3, =__data_end___loader
+
+ subs r3, r2
+ ble .LC2
+
+.LC3:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC3
+.LC2:
+
+ subs r0, r0
+ ldr r2, =__bss_start___loader
+ ldr r3, =__bss_end___loader
+
+ subs r3, r2
+ ble .LC4
+
+.LC5:
+ subs r3, 4
+ str r0, [r2,r3]
+ bgt .LC5
+.LC4:
+
+ LDR R0, =__HeapBase
+ LDR R1, =__HeapLimit
+ BL _sbrkInit
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =_start
+ BX R0
+
+ .pool
+ .cantunwind
+ .fnend
+ .size Reset_Handler_split,.-Reset_Handler_split
+
+ .section ".text"
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/nucleo-f401re/src/arch/cortex_m4/startup_STM32F40x.s
----------------------------------------------------------------------
diff --git a/hw/bsp/nucleo-f401re/src/arch/cortex_m4/startup_STM32F40x.s b/hw/bsp/nucleo-f401re/src/arch/cortex_m4/startup_STM32F40x.s
new file mode 100644
index 0000000..646b4bf
--- /dev/null
+++ b/hw/bsp/nucleo-f401re/src/arch/cortex_m4/startup_STM32F40x.s
@@ -0,0 +1,343 @@
+/* File: startup_STM32F40x.S
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ * GCC for ARM Embedded Processors
+ * Version: V1.4
+ * Date: 09 July 2012
+ *
+ * Copyright (c) 2011, 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the ARM Limited nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+#ifdef __STACK_SIZE
+ .equ Stack_Size, __STACK_SIZE
+#else
+ .equ Stack_Size, 0xc00
+#endif
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long MemManage_Handler /* MPU Fault Handler */
+ .long BusFault_Handler /* Bus Fault Handler */
+ .long UsageFault_Handler /* Usage Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long DebugMon_Handler /* Debug Monitor Handler */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External interrupts */
+ .long WWDG_IRQHandler /* Window WatchDog */
+ .long PVD_IRQHandler /* PVD through EXTI Line detection */
+ .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .long FLASH_IRQHandler /* FLASH */
+ .long RCC_IRQHandler /* RCC */
+ .long EXTI0_IRQHandler /* EXTI Line0 */
+ .long EXTI1_IRQHandler /* EXTI Line1 */
+ .long EXTI2_IRQHandler /* EXTI Line2 */
+ .long EXTI3_IRQHandler /* EXTI Line3 */
+ .long EXTI4_IRQHandler /* EXTI Line4 */
+ .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .long CAN1_TX_IRQHandler /* CAN1 TX */
+ .long CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .long CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .long CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .long EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .long TIM2_IRQHandler /* TIM2 */
+ .long TIM3_IRQHandler /* TIM3 */
+ .long TIM4_IRQHandler /* TIM4 */
+ .long I2C1_EV_IRQHandler /* I2C1 Event */
+ .long I2C1_ER_IRQHandler /* I2C1 Error */
+ .long I2C2_EV_IRQHandler /* I2C2 Event */
+ .long I2C2_ER_IRQHandler /* I2C2 Error */
+ .long SPI1_IRQHandler /* SPI1 */
+ .long SPI2_IRQHandler /* SPI2 */
+ .long USART1_IRQHandler /* USART1 */
+ .long USART2_IRQHandler /* USART2 */
+ .long USART3_IRQHandler /* USART3 */
+ .long EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .long TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .long TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .long TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .long TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .long FSMC_IRQHandler /* FSMC */
+ .long SDIO_IRQHandler /* SDIO */
+ .long TIM5_IRQHandler /* TIM5 */
+ .long SPI3_IRQHandler /* SPI3 */
+ .long UART4_IRQHandler /* UART4 */
+ .long UART5_IRQHandler /* UART5 */
+ .long TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .long TIM7_IRQHandler /* TIM7 */
+ .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .long ETH_IRQHandler /* Ethernet */
+ .long ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .long CAN2_TX_IRQHandler /* CAN2 TX */
+ .long CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .long CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .long CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .long OTG_FS_IRQHandler /* USB OTG FS */
+ .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .long USART6_IRQHandler /* USART6 */
+ .long I2C3_EV_IRQHandler /* I2C3 event */
+ .long I2C3_ER_IRQHandler /* I2C3 error */
+ .long OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .long OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .long OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .long OTG_HS_IRQHandler /* USB OTG HS */
+ .long DCMI_IRQHandler /* DCMI */
+ .long CRYP_IRQHandler /* CRYP crypto */
+ .long HASH_RNG_IRQHandler /* Hash and Rng */
+ .long FPU_IRQHandler /* FPU */
+
+ .size __isr_vector, . - __isr_vector
+
+ .text
+ .thumb
+ .thumb_func
+ .align 2
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+/* Copy data core section from flash to RAM */
+ ldr r1, =__etext
+ ldr r2, =__coredata_start__
+ ldr r3, =__coredata_end__
+
+.LC0:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC0
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+ ldr r1, =__ecoredata
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+.LC1:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC1
+
+/* Set the bss core section to zero */
+ mov r0, #0
+ ldr r1, =__corebss_start__
+ ldr r2, =__corebss_end__
+
+.LC2:
+ cmp r1, r2
+ itt lt
+ strlt r0, [r1], #4
+ blt .LC2
+
+/* Call system initialization and startup routines */
+ ldr r0, =SystemInit
+ blx r0
+ ldr r0, =_start
+ bx r0
+ .pool
+ .size Reset_Handler, . - Reset_Handler
+
+ .text
+/* Macro to define default handlers. Default handler
+ * will be weak symbol and just dead loops. They can be
+ * overwritten by other handlers */
+ .macro def_default_handler handler_name
+ .align 1
+ .thumb_func
+ .weak \handler_name
+ .type \handler_name, %function
+\handler_name :
+ b .
+ .size \handler_name, . - \handler_name
+ .endm
+
+ def_default_handler NMI_Handler
+ def_default_handler HardFault_Handler
+ def_default_handler MemManage_Handler
+ def_default_handler BusFault_Handler
+ def_default_handler UsageFault_Handler
+ def_default_handler SVC_Handler
+ def_default_handler DebugMon_Handler
+ def_default_handler PendSV_Handler
+ def_default_handler SysTick_Handler
+ def_default_handler Default_Handler
+
+ .macro def_irq_default_handler handler_name
+ .weak \handler_name
+ .set \handler_name, Default_Handler
+ .endm
+
+ def_irq_default_handler WWDG_IRQHandler
+ def_irq_default_handler PVD_IRQHandler
+ def_irq_default_handler TAMP_STAMP_IRQHandler
+ def_irq_default_handler RTC_WKUP_IRQHandler
+ def_irq_default_handler FLASH_IRQHandler
+ def_irq_default_handler RCC_IRQHandler
+ def_irq_default_handler EXTI0_IRQHandler
+ def_irq_default_handler EXTI1_IRQHandler
+ def_irq_default_handler EXTI2_IRQHandler
+ def_irq_default_handler EXTI3_IRQHandler
+ def_irq_default_handler EXTI4_IRQHandler
+ def_irq_default_handler DMA1_Stream0_IRQHandler
+ def_irq_default_handler DMA1_Stream1_IRQHandler
+ def_irq_default_handler DMA1_Stream2_IRQHandler
+ def_irq_default_handler DMA1_Stream3_IRQHandler
+ def_irq_default_handler DMA1_Stream4_IRQHandler
+ def_irq_default_handler DMA1_Stream5_IRQHandler
+ def_irq_default_handler DMA1_Stream6_IRQHandler
+ def_irq_default_handler ADC_IRQHandler
+ def_irq_default_handler CAN1_TX_IRQHandler
+ def_irq_default_handler CAN1_RX0_IRQHandler
+ def_irq_default_handler CAN1_RX1_IRQHandler
+ def_irq_default_handler CAN1_SCE_IRQHandler
+ def_irq_default_handler EXTI9_5_IRQHandler
+ def_irq_default_handler TIM1_BRK_TIM9_IRQHandler
+ def_irq_default_handler TIM1_UP_TIM10_IRQHandler
+ def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler
+ def_irq_default_handler TIM1_CC_IRQHandler
+ def_irq_default_handler TIM2_IRQHandler
+ def_irq_default_handler TIM3_IRQHandler
+ def_irq_default_handler TIM4_IRQHandler
+ def_irq_default_handler I2C1_EV_IRQHandler
+ def_irq_default_handler I2C1_ER_IRQHandler
+ def_irq_default_handler I2C2_EV_IRQHandler
+ def_irq_default_handler I2C2_ER_IRQHandler
+ def_irq_default_handler SPI1_IRQHandler
+ def_irq_default_handler SPI2_IRQHandler
+ def_irq_default_handler USART1_IRQHandler
+ def_irq_default_handler USART2_IRQHandler
+ def_irq_default_handler USART3_IRQHandler
+ def_irq_default_handler EXTI15_10_IRQHandler
+ def_irq_default_handler RTC_Alarm_IRQHandler
+ def_irq_default_handler OTG_FS_WKUP_IRQHandler
+ def_irq_default_handler TIM8_BRK_TIM12_IRQHandler
+ def_irq_default_handler TIM8_UP_TIM13_IRQHandler
+ def_irq_default_handler TIM8_TRG_COM_TIM14_IRQHandler
+ def_irq_default_handler TIM8_CC_IRQHandler
+ def_irq_default_handler DMA1_Stream7_IRQHandler
+ def_irq_default_handler FSMC_IRQHandler
+ def_irq_default_handler SDIO_IRQHandler
+ def_irq_default_handler TIM5_IRQHandler
+ def_irq_default_handler SPI3_IRQHandler
+ def_irq_default_handler UART4_IRQHandler
+ def_irq_default_handler UART5_IRQHandler
+ def_irq_default_handler TIM6_DAC_IRQHandler
+ def_irq_default_handler TIM7_IRQHandler
+ def_irq_default_handler DMA2_Stream0_IRQHandler
+ def_irq_default_handler DMA2_Stream1_IRQHandler
+ def_irq_default_handler DMA2_Stream2_IRQHandler
+ def_irq_default_handler DMA2_Stream3_IRQHandler
+ def_irq_default_handler DMA2_Stream4_IRQHandler
+ def_irq_default_handler ETH_IRQHandler
+ def_irq_default_handler ETH_WKUP_IRQHandler
+ def_irq_default_handler CAN2_TX_IRQHandler
+ def_irq_default_handler CAN2_RX0_IRQHandler
+ def_irq_default_handler CAN2_RX1_IRQHandler
+ def_irq_default_handler CAN2_SCE_IRQHandler
+ def_irq_default_handler OTG_FS_IRQHandler
+ def_irq_default_handler DMA2_Stream5_IRQHandler
+ def_irq_default_handler DMA2_Stream6_IRQHandler
+ def_irq_default_handler DMA2_Stream7_IRQHandler
+ def_irq_default_handler USART6_IRQHandler
+ def_irq_default_handler I2C3_EV_IRQHandler
+ def_irq_default_handler I2C3_ER_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_OUT_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_IN_IRQHandler
+ def_irq_default_handler OTG_HS_WKUP_IRQHandler
+ def_irq_default_handler OTG_HS_IRQHandler
+ def_irq_default_handler DCMI_IRQHandler
+ def_irq_default_handler CRYP_IRQHandler
+ def_irq_default_handler HASH_RNG_IRQHandler
+ def_irq_default_handler FPU_IRQHandler
+ def_irq_default_handler DEF_IRQHandler
+
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/olimex_stm32-e407_devboard/src/arch/cortex_m4/startup_STM32F40x.s
----------------------------------------------------------------------
diff --git a/hw/bsp/olimex_stm32-e407_devboard/src/arch/cortex_m4/startup_STM32F40x.s b/hw/bsp/olimex_stm32-e407_devboard/src/arch/cortex_m4/startup_STM32F40x.s
new file mode 100755
index 0000000..646b4bf
--- /dev/null
+++ b/hw/bsp/olimex_stm32-e407_devboard/src/arch/cortex_m4/startup_STM32F40x.s
@@ -0,0 +1,343 @@
+/* File: startup_STM32F40x.S
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ * GCC for ARM Embedded Processors
+ * Version: V1.4
+ * Date: 09 July 2012
+ *
+ * Copyright (c) 2011, 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the ARM Limited nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+#ifdef __STACK_SIZE
+ .equ Stack_Size, __STACK_SIZE
+#else
+ .equ Stack_Size, 0xc00
+#endif
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long MemManage_Handler /* MPU Fault Handler */
+ .long BusFault_Handler /* Bus Fault Handler */
+ .long UsageFault_Handler /* Usage Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long DebugMon_Handler /* Debug Monitor Handler */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External interrupts */
+ .long WWDG_IRQHandler /* Window WatchDog */
+ .long PVD_IRQHandler /* PVD through EXTI Line detection */
+ .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .long FLASH_IRQHandler /* FLASH */
+ .long RCC_IRQHandler /* RCC */
+ .long EXTI0_IRQHandler /* EXTI Line0 */
+ .long EXTI1_IRQHandler /* EXTI Line1 */
+ .long EXTI2_IRQHandler /* EXTI Line2 */
+ .long EXTI3_IRQHandler /* EXTI Line3 */
+ .long EXTI4_IRQHandler /* EXTI Line4 */
+ .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .long CAN1_TX_IRQHandler /* CAN1 TX */
+ .long CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .long CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .long CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .long EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .long TIM2_IRQHandler /* TIM2 */
+ .long TIM3_IRQHandler /* TIM3 */
+ .long TIM4_IRQHandler /* TIM4 */
+ .long I2C1_EV_IRQHandler /* I2C1 Event */
+ .long I2C1_ER_IRQHandler /* I2C1 Error */
+ .long I2C2_EV_IRQHandler /* I2C2 Event */
+ .long I2C2_ER_IRQHandler /* I2C2 Error */
+ .long SPI1_IRQHandler /* SPI1 */
+ .long SPI2_IRQHandler /* SPI2 */
+ .long USART1_IRQHandler /* USART1 */
+ .long USART2_IRQHandler /* USART2 */
+ .long USART3_IRQHandler /* USART3 */
+ .long EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .long TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .long TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .long TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .long TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .long FSMC_IRQHandler /* FSMC */
+ .long SDIO_IRQHandler /* SDIO */
+ .long TIM5_IRQHandler /* TIM5 */
+ .long SPI3_IRQHandler /* SPI3 */
+ .long UART4_IRQHandler /* UART4 */
+ .long UART5_IRQHandler /* UART5 */
+ .long TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .long TIM7_IRQHandler /* TIM7 */
+ .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .long ETH_IRQHandler /* Ethernet */
+ .long ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .long CAN2_TX_IRQHandler /* CAN2 TX */
+ .long CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .long CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .long CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .long OTG_FS_IRQHandler /* USB OTG FS */
+ .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .long USART6_IRQHandler /* USART6 */
+ .long I2C3_EV_IRQHandler /* I2C3 event */
+ .long I2C3_ER_IRQHandler /* I2C3 error */
+ .long OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .long OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .long OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .long OTG_HS_IRQHandler /* USB OTG HS */
+ .long DCMI_IRQHandler /* DCMI */
+ .long CRYP_IRQHandler /* CRYP crypto */
+ .long HASH_RNG_IRQHandler /* Hash and Rng */
+ .long FPU_IRQHandler /* FPU */
+
+ .size __isr_vector, . - __isr_vector
+
+ .text
+ .thumb
+ .thumb_func
+ .align 2
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+/* Copy data core section from flash to RAM */
+ ldr r1, =__etext
+ ldr r2, =__coredata_start__
+ ldr r3, =__coredata_end__
+
+.LC0:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC0
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+ ldr r1, =__ecoredata
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+.LC1:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC1
+
+/* Set the bss core section to zero */
+ mov r0, #0
+ ldr r1, =__corebss_start__
+ ldr r2, =__corebss_end__
+
+.LC2:
+ cmp r1, r2
+ itt lt
+ strlt r0, [r1], #4
+ blt .LC2
+
+/* Call system initialization and startup routines */
+ ldr r0, =SystemInit
+ blx r0
+ ldr r0, =_start
+ bx r0
+ .pool
+ .size Reset_Handler, . - Reset_Handler
+
+ .text
+/* Macro to define default handlers. Default handler
+ * will be weak symbol and just dead loops. They can be
+ * overwritten by other handlers */
+ .macro def_default_handler handler_name
+ .align 1
+ .thumb_func
+ .weak \handler_name
+ .type \handler_name, %function
+\handler_name :
+ b .
+ .size \handler_name, . - \handler_name
+ .endm
+
+ def_default_handler NMI_Handler
+ def_default_handler HardFault_Handler
+ def_default_handler MemManage_Handler
+ def_default_handler BusFault_Handler
+ def_default_handler UsageFault_Handler
+ def_default_handler SVC_Handler
+ def_default_handler DebugMon_Handler
+ def_default_handler PendSV_Handler
+ def_default_handler SysTick_Handler
+ def_default_handler Default_Handler
+
+ .macro def_irq_default_handler handler_name
+ .weak \handler_name
+ .set \handler_name, Default_Handler
+ .endm
+
+ def_irq_default_handler WWDG_IRQHandler
+ def_irq_default_handler PVD_IRQHandler
+ def_irq_default_handler TAMP_STAMP_IRQHandler
+ def_irq_default_handler RTC_WKUP_IRQHandler
+ def_irq_default_handler FLASH_IRQHandler
+ def_irq_default_handler RCC_IRQHandler
+ def_irq_default_handler EXTI0_IRQHandler
+ def_irq_default_handler EXTI1_IRQHandler
+ def_irq_default_handler EXTI2_IRQHandler
+ def_irq_default_handler EXTI3_IRQHandler
+ def_irq_default_handler EXTI4_IRQHandler
+ def_irq_default_handler DMA1_Stream0_IRQHandler
+ def_irq_default_handler DMA1_Stream1_IRQHandler
+ def_irq_default_handler DMA1_Stream2_IRQHandler
+ def_irq_default_handler DMA1_Stream3_IRQHandler
+ def_irq_default_handler DMA1_Stream4_IRQHandler
+ def_irq_default_handler DMA1_Stream5_IRQHandler
+ def_irq_default_handler DMA1_Stream6_IRQHandler
+ def_irq_default_handler ADC_IRQHandler
+ def_irq_default_handler CAN1_TX_IRQHandler
+ def_irq_default_handler CAN1_RX0_IRQHandler
+ def_irq_default_handler CAN1_RX1_IRQHandler
+ def_irq_default_handler CAN1_SCE_IRQHandler
+ def_irq_default_handler EXTI9_5_IRQHandler
+ def_irq_default_handler TIM1_BRK_TIM9_IRQHandler
+ def_irq_default_handler TIM1_UP_TIM10_IRQHandler
+ def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler
+ def_irq_default_handler TIM1_CC_IRQHandler
+ def_irq_default_handler TIM2_IRQHandler
+ def_irq_default_handler TIM3_IRQHandler
+ def_irq_default_handler TIM4_IRQHandler
+ def_irq_default_handler I2C1_EV_IRQHandler
+ def_irq_default_handler I2C1_ER_IRQHandler
+ def_irq_default_handler I2C2_EV_IRQHandler
+ def_irq_default_handler I2C2_ER_IRQHandler
+ def_irq_default_handler SPI1_IRQHandler
+ def_irq_default_handler SPI2_IRQHandler
+ def_irq_default_handler USART1_IRQHandler
+ def_irq_default_handler USART2_IRQHandler
+ def_irq_default_handler USART3_IRQHandler
+ def_irq_default_handler EXTI15_10_IRQHandler
+ def_irq_default_handler RTC_Alarm_IRQHandler
+ def_irq_default_handler OTG_FS_WKUP_IRQHandler
+ def_irq_default_handler TIM8_BRK_TIM12_IRQHandler
+ def_irq_default_handler TIM8_UP_TIM13_IRQHandler
+ def_irq_default_handler TIM8_TRG_COM_TIM14_IRQHandler
+ def_irq_default_handler TIM8_CC_IRQHandler
+ def_irq_default_handler DMA1_Stream7_IRQHandler
+ def_irq_default_handler FSMC_IRQHandler
+ def_irq_default_handler SDIO_IRQHandler
+ def_irq_default_handler TIM5_IRQHandler
+ def_irq_default_handler SPI3_IRQHandler
+ def_irq_default_handler UART4_IRQHandler
+ def_irq_default_handler UART5_IRQHandler
+ def_irq_default_handler TIM6_DAC_IRQHandler
+ def_irq_default_handler TIM7_IRQHandler
+ def_irq_default_handler DMA2_Stream0_IRQHandler
+ def_irq_default_handler DMA2_Stream1_IRQHandler
+ def_irq_default_handler DMA2_Stream2_IRQHandler
+ def_irq_default_handler DMA2_Stream3_IRQHandler
+ def_irq_default_handler DMA2_Stream4_IRQHandler
+ def_irq_default_handler ETH_IRQHandler
+ def_irq_default_handler ETH_WKUP_IRQHandler
+ def_irq_default_handler CAN2_TX_IRQHandler
+ def_irq_default_handler CAN2_RX0_IRQHandler
+ def_irq_default_handler CAN2_RX1_IRQHandler
+ def_irq_default_handler CAN2_SCE_IRQHandler
+ def_irq_default_handler OTG_FS_IRQHandler
+ def_irq_default_handler DMA2_Stream5_IRQHandler
+ def_irq_default_handler DMA2_Stream6_IRQHandler
+ def_irq_default_handler DMA2_Stream7_IRQHandler
+ def_irq_default_handler USART6_IRQHandler
+ def_irq_default_handler I2C3_EV_IRQHandler
+ def_irq_default_handler I2C3_ER_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_OUT_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_IN_IRQHandler
+ def_irq_default_handler OTG_HS_WKUP_IRQHandler
+ def_irq_default_handler OTG_HS_IRQHandler
+ def_irq_default_handler DCMI_IRQHandler
+ def_irq_default_handler CRYP_IRQHandler
+ def_irq_default_handler HASH_RNG_IRQHandler
+ def_irq_default_handler FPU_IRQHandler
+ def_irq_default_handler DEF_IRQHandler
+
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52.s
----------------------------------------------------------------------
diff --git a/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52.s b/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52.s
new file mode 100755
index 0000000..fb804fd
--- /dev/null
+++ b/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52.s
@@ -0,0 +1,289 @@
+/*
+Copyright (c) 2015, Nordic Semiconductor ASA
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+* Neither the name of Nordic Semiconductor ASA nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+NOTE: Template files (including this one) are application specific and therefore
+expected to be copied into the application project folder prior to its use!
+*/
+
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+ .equ Stack_Size, 432
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External Interrupts */
+ .long POWER_CLOCK_IRQHandler
+ .long RADIO_IRQHandler
+ .long UARTE0_UART0_IRQHandler
+ .long SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler
+ .long SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler
+ .long NFCT_IRQHandler
+ .long GPIOTE_IRQHandler
+ .long SAADC_IRQHandler
+ .long TIMER0_IRQHandler
+ .long TIMER1_IRQHandler
+ .long TIMER2_IRQHandler
+ .long RTC0_IRQHandler
+ .long TEMP_IRQHandler
+ .long RNG_IRQHandler
+ .long ECB_IRQHandler
+ .long CCM_AAR_IRQHandler
+ .long WDT_IRQHandler
+ .long RTC1_IRQHandler
+ .long QDEC_IRQHandler
+ .long COMP_LPCOMP_IRQHandler
+ .long SWI0_EGU0_IRQHandler
+ .long SWI1_EGU1_IRQHandler
+ .long SWI2_EGU2_IRQHandler
+ .long SWI3_EGU3_IRQHandler
+ .long SWI4_EGU4_IRQHandler
+ .long SWI5_EGU5_IRQHandler
+ .long TIMER3_IRQHandler
+ .long TIMER4_IRQHandler
+ .long PWM0_IRQHandler
+ .long PDM_IRQHandler
+ .long 0 /*Reserved */
+ .long 0 /*Reserved */
+ .long MWU_IRQHandler
+ .long PWM1_IRQHandler
+ .long PWM2_IRQHandler
+ .long SPIM2_SPIS2_SPI2_IRQHandler
+ .long RTC2_IRQHandler
+ .long I2S_IRQHandler
+
+ .size __isr_vector, . - __isr_vector
+
+/* Reset Handler */
+
+ .text
+ .thumb
+ .thumb_func
+ .align 1
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ .fnstart
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+ subs r3, r2
+ ble .LC0
+
+.LC1:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC1
+
+.LC0:
+
+ LDR R0, =__HeapBase
+ LDR R1, =__HeapLimit
+ BL _sbrkInit
+
+ LDR R0, =SystemInit
+ BLX R0
+
+ LDR R0, =_start
+ BX R0
+
+ .pool
+ .cantunwind
+ .fnend
+ .size Reset_Handler,.-Reset_Handler
+
+ .section ".text"
+
+
+/* Dummy Exception Handlers (infinite loops which can be modified) */
+
+ .weak NMI_Handler
+ .type NMI_Handler, %function
+NMI_Handler:
+ B .
+ .size NMI_Handler, . - NMI_Handler
+
+
+ .weak HardFault_Handler
+ .type HardFault_Handler, %function
+HardFault_Handler:
+ B .
+ .size HardFault_Handler, . - HardFault_Handler
+
+
+ .weak MemoryManagement_Handler
+ .type MemoryManagement_Handler, %function
+MemoryManagement_Handler:
+ B .
+ .size MemoryManagement_Handler, . - MemoryManagement_Handler
+
+
+ .weak BusFault_Handler
+ .type BusFault_Handler, %function
+BusFault_Handler:
+ B .
+ .size BusFault_Handler, . - BusFault_Handler
+
+
+ .weak UsageFault_Handler
+ .type UsageFault_Handler, %function
+UsageFault_Handler:
+ B .
+ .size UsageFault_Handler, . - UsageFault_Handler
+
+
+ .weak SVC_Handler
+ .type SVC_Handler, %function
+SVC_Handler:
+ B .
+ .size SVC_Handler, . - SVC_Handler
+
+
+ .weak PendSV_Handler
+ .type PendSV_Handler, %function
+PendSV_Handler:
+ B .
+ .size PendSV_Handler, . - PendSV_Handler
+
+
+ .weak SysTick_Handler
+ .type SysTick_Handler, %function
+SysTick_Handler:
+ B .
+ .size SysTick_Handler, . - SysTick_Handler
+
+
+/* IRQ Handlers */
+
+ .globl Default_Handler
+ .type Default_Handler, %function
+Default_Handler:
+ B .
+ .size Default_Handler, . - Default_Handler
+
+ .macro IRQ handler
+ .weak \handler
+ .set \handler, Default_Handler
+ .endm
+
+ IRQ POWER_CLOCK_IRQHandler
+ IRQ RADIO_IRQHandler
+ IRQ UARTE0_UART0_IRQHandler
+ IRQ SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQHandler
+ IRQ SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQHandler
+ IRQ NFCT_IRQHandler
+ IRQ GPIOTE_IRQHandler
+ IRQ SAADC_IRQHandler
+ IRQ TIMER0_IRQHandler
+ IRQ TIMER1_IRQHandler
+ IRQ TIMER2_IRQHandler
+ IRQ RTC0_IRQHandler
+ IRQ TEMP_IRQHandler
+ IRQ RNG_IRQHandler
+ IRQ ECB_IRQHandler
+ IRQ CCM_AAR_IRQHandler
+ IRQ WDT_IRQHandler
+ IRQ RTC1_IRQHandler
+ IRQ QDEC_IRQHandler
+ IRQ COMP_LPCOMP_IRQHandler
+ IRQ SWI0_EGU0_IRQHandler
+ IRQ SWI1_EGU1_IRQHandler
+ IRQ SWI2_EGU2_IRQHandler
+ IRQ SWI3_EGU3_IRQHandler
+ IRQ SWI4_EGU4_IRQHandler
+ IRQ SWI5_EGU5_IRQHandler
+ IRQ TIMER3_IRQHandler
+ IRQ TIMER4_IRQHandler
+ IRQ PWM0_IRQHandler
+ IRQ PDM_IRQHandler
+ IRQ MWU_IRQHandler
+ IRQ PWM1_IRQHandler
+ IRQ PWM2_IRQHandler
+ IRQ SPIM2_SPIS2_SPI2_IRQHandler
+ IRQ RTC2_IRQHandler
+ IRQ I2S_IRQHandler
+
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52_split.s
----------------------------------------------------------------------
diff --git a/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52_split.s b/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52_split.s
new file mode 100755
index 0000000..7426848
--- /dev/null
+++ b/hw/bsp/rb-nano2/src/arch/cortex_m4/gcc_startup_nrf52_split.s
@@ -0,0 +1,150 @@
+/*
+Copyright (c) 2015, Nordic Semiconductor ASA
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+* Neither the name of Nordic Semiconductor ASA nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*
+NOTE: Template files (including this one) are application specific and therefore
+expected to be copied into the application project folder prior to its use!
+*/
+
+ .syntax unified
+ .arch armv7-m
+ .section .stack
+ .align 3
+ .equ Stack_Size, 432
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector_split
+ .align 2
+ .globl __isr_vector_split
+__isr_vector_split:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler_split /* Reset Handler */
+
+ .size __isr_vector_split, . - __isr_vector_split
+
+/* Reset Handler */
+
+ .text
+ .thumb
+ .thumb_func
+ .align 1
+ .globl Reset_Handler_split
+ .type Reset_Handler_split, %function
+Reset_Handler_split:
+ .fnstart
+
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+
+ ldr r1, =__etext
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+ subs r3, r2
+ ble .LC0
+
+.LC1:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC1
+
+.LC0:
+ ldr r1, =__etext_loader
+ ldr r2, =__data_start___loader
+ ldr r3, =__data_end___loader
+
+ subs r3, r2
+ ble .LC2
+
+.LC3:
+ subs r3, 4
+ ldr r0, [r1,r3]
+ str r0, [r2,r3]
+ bgt .LC3
+.LC2:
+
+ subs r0, r0
+ ldr r2, =__bss_start___loader
+ ldr r3, =__bss_end___loader
+
+ subs r3, r2
+ ble .LC4
+
+.LC5:
+ subs r3, 4
+ str r0, [r2,r3]
+ bgt .LC5
+.LC4:
+
+ LDR R0, =__HeapBase
+ LDR R1, =__HeapLimit
+ BL _sbrkInit
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =_start
+ BX R0
+
+ .pool
+ .cantunwind
+ .fnend
+ .size Reset_Handler_split,.-Reset_Handler_split
+
+ .section ".text"
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/bsp/stm32f4discovery/src/arch/cortex_m4/startup_STM32F40x.s
----------------------------------------------------------------------
diff --git a/hw/bsp/stm32f4discovery/src/arch/cortex_m4/startup_STM32F40x.s b/hw/bsp/stm32f4discovery/src/arch/cortex_m4/startup_STM32F40x.s
new file mode 100644
index 0000000..646b4bf
--- /dev/null
+++ b/hw/bsp/stm32f4discovery/src/arch/cortex_m4/startup_STM32F40x.s
@@ -0,0 +1,343 @@
+/* File: startup_STM32F40x.S
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ * GCC for ARM Embedded Processors
+ * Version: V1.4
+ * Date: 09 July 2012
+ *
+ * Copyright (c) 2011, 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the ARM Limited nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ .syntax unified
+ .arch armv7-m
+
+ .section .stack
+ .align 3
+#ifdef __STACK_SIZE
+ .equ Stack_Size, __STACK_SIZE
+#else
+ .equ Stack_Size, 0xc00
+#endif
+ .globl __StackTop
+ .globl __StackLimit
+__StackLimit:
+ .space Stack_Size
+ .size __StackLimit, . - __StackLimit
+__StackTop:
+ .size __StackTop, . - __StackTop
+
+ .section .heap
+ .align 3
+#ifdef __HEAP_SIZE
+ .equ Heap_Size, __HEAP_SIZE
+#else
+ .equ Heap_Size, 0
+#endif
+ .globl __HeapBase
+ .globl __HeapLimit
+__HeapBase:
+ .if Heap_Size
+ .space Heap_Size
+ .endif
+ .size __HeapBase, . - __HeapBase
+__HeapLimit:
+ .size __HeapLimit, . - __HeapLimit
+
+ .section .isr_vector
+ .align 2
+ .globl __isr_vector
+__isr_vector:
+ .long __StackTop /* Top of Stack */
+ .long Reset_Handler /* Reset Handler */
+ .long NMI_Handler /* NMI Handler */
+ .long HardFault_Handler /* Hard Fault Handler */
+ .long MemManage_Handler /* MPU Fault Handler */
+ .long BusFault_Handler /* Bus Fault Handler */
+ .long UsageFault_Handler /* Usage Fault Handler */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long 0 /* Reserved */
+ .long SVC_Handler /* SVCall Handler */
+ .long DebugMon_Handler /* Debug Monitor Handler */
+ .long 0 /* Reserved */
+ .long PendSV_Handler /* PendSV Handler */
+ .long SysTick_Handler /* SysTick Handler */
+
+ /* External interrupts */
+ .long WWDG_IRQHandler /* Window WatchDog */
+ .long PVD_IRQHandler /* PVD through EXTI Line detection */
+ .long TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .long RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .long FLASH_IRQHandler /* FLASH */
+ .long RCC_IRQHandler /* RCC */
+ .long EXTI0_IRQHandler /* EXTI Line0 */
+ .long EXTI1_IRQHandler /* EXTI Line1 */
+ .long EXTI2_IRQHandler /* EXTI Line2 */
+ .long EXTI3_IRQHandler /* EXTI Line3 */
+ .long EXTI4_IRQHandler /* EXTI Line4 */
+ .long DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .long DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .long DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .long DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .long DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .long DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .long DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .long ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .long CAN1_TX_IRQHandler /* CAN1 TX */
+ .long CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .long CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .long CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .long EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .long TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .long TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .long TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .long TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .long TIM2_IRQHandler /* TIM2 */
+ .long TIM3_IRQHandler /* TIM3 */
+ .long TIM4_IRQHandler /* TIM4 */
+ .long I2C1_EV_IRQHandler /* I2C1 Event */
+ .long I2C1_ER_IRQHandler /* I2C1 Error */
+ .long I2C2_EV_IRQHandler /* I2C2 Event */
+ .long I2C2_ER_IRQHandler /* I2C2 Error */
+ .long SPI1_IRQHandler /* SPI1 */
+ .long SPI2_IRQHandler /* SPI2 */
+ .long USART1_IRQHandler /* USART1 */
+ .long USART2_IRQHandler /* USART2 */
+ .long USART3_IRQHandler /* USART3 */
+ .long EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .long RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .long OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .long TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .long TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .long TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .long TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .long DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .long FSMC_IRQHandler /* FSMC */
+ .long SDIO_IRQHandler /* SDIO */
+ .long TIM5_IRQHandler /* TIM5 */
+ .long SPI3_IRQHandler /* SPI3 */
+ .long UART4_IRQHandler /* UART4 */
+ .long UART5_IRQHandler /* UART5 */
+ .long TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .long TIM7_IRQHandler /* TIM7 */
+ .long DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .long DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .long DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .long DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .long DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .long ETH_IRQHandler /* Ethernet */
+ .long ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .long CAN2_TX_IRQHandler /* CAN2 TX */
+ .long CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .long CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .long CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .long OTG_FS_IRQHandler /* USB OTG FS */
+ .long DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .long DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .long DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .long USART6_IRQHandler /* USART6 */
+ .long I2C3_EV_IRQHandler /* I2C3 event */
+ .long I2C3_ER_IRQHandler /* I2C3 error */
+ .long OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .long OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .long OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .long OTG_HS_IRQHandler /* USB OTG HS */
+ .long DCMI_IRQHandler /* DCMI */
+ .long CRYP_IRQHandler /* CRYP crypto */
+ .long HASH_RNG_IRQHandler /* Hash and Rng */
+ .long FPU_IRQHandler /* FPU */
+
+ .size __isr_vector, . - __isr_vector
+
+ .text
+ .thumb
+ .thumb_func
+ .align 2
+ .globl Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+/* Copy data core section from flash to RAM */
+ ldr r1, =__etext
+ ldr r2, =__coredata_start__
+ ldr r3, =__coredata_end__
+
+.LC0:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC0
+
+/* Loop to copy data from read only memory to RAM. The ranges
+ * of copy from/to are specified by following symbols evaluated in
+ * linker script.
+ * __etext: End of code section, i.e., begin of data sections to copy from.
+ * __data_start__/__data_end__: RAM address range that data should be
+ * copied to. Both must be aligned to 4 bytes boundary. */
+ ldr r1, =__ecoredata
+ ldr r2, =__data_start__
+ ldr r3, =__data_end__
+
+.LC1:
+ cmp r2, r3
+ ittt lt
+ ldrlt r0, [r1], #4
+ strlt r0, [r2], #4
+ blt .LC1
+
+/* Set the bss core section to zero */
+ mov r0, #0
+ ldr r1, =__corebss_start__
+ ldr r2, =__corebss_end__
+
+.LC2:
+ cmp r1, r2
+ itt lt
+ strlt r0, [r1], #4
+ blt .LC2
+
+/* Call system initialization and startup routines */
+ ldr r0, =SystemInit
+ blx r0
+ ldr r0, =_start
+ bx r0
+ .pool
+ .size Reset_Handler, . - Reset_Handler
+
+ .text
+/* Macro to define default handlers. Default handler
+ * will be weak symbol and just dead loops. They can be
+ * overwritten by other handlers */
+ .macro def_default_handler handler_name
+ .align 1
+ .thumb_func
+ .weak \handler_name
+ .type \handler_name, %function
+\handler_name :
+ b .
+ .size \handler_name, . - \handler_name
+ .endm
+
+ def_default_handler NMI_Handler
+ def_default_handler HardFault_Handler
+ def_default_handler MemManage_Handler
+ def_default_handler BusFault_Handler
+ def_default_handler UsageFault_Handler
+ def_default_handler SVC_Handler
+ def_default_handler DebugMon_Handler
+ def_default_handler PendSV_Handler
+ def_default_handler SysTick_Handler
+ def_default_handler Default_Handler
+
+ .macro def_irq_default_handler handler_name
+ .weak \handler_name
+ .set \handler_name, Default_Handler
+ .endm
+
+ def_irq_default_handler WWDG_IRQHandler
+ def_irq_default_handler PVD_IRQHandler
+ def_irq_default_handler TAMP_STAMP_IRQHandler
+ def_irq_default_handler RTC_WKUP_IRQHandler
+ def_irq_default_handler FLASH_IRQHandler
+ def_irq_default_handler RCC_IRQHandler
+ def_irq_default_handler EXTI0_IRQHandler
+ def_irq_default_handler EXTI1_IRQHandler
+ def_irq_default_handler EXTI2_IRQHandler
+ def_irq_default_handler EXTI3_IRQHandler
+ def_irq_default_handler EXTI4_IRQHandler
+ def_irq_default_handler DMA1_Stream0_IRQHandler
+ def_irq_default_handler DMA1_Stream1_IRQHandler
+ def_irq_default_handler DMA1_Stream2_IRQHandler
+ def_irq_default_handler DMA1_Stream3_IRQHandler
+ def_irq_default_handler DMA1_Stream4_IRQHandler
+ def_irq_default_handler DMA1_Stream5_IRQHandler
+ def_irq_default_handler DMA1_Stream6_IRQHandler
+ def_irq_default_handler ADC_IRQHandler
+ def_irq_default_handler CAN1_TX_IRQHandler
+ def_irq_default_handler CAN1_RX0_IRQHandler
+ def_irq_default_handler CAN1_RX1_IRQHandler
+ def_irq_default_handler CAN1_SCE_IRQHandler
+ def_irq_default_handler EXTI9_5_IRQHandler
+ def_irq_default_handler TIM1_BRK_TIM9_IRQHandler
+ def_irq_default_handler TIM1_UP_TIM10_IRQHandler
+ def_irq_default_handler TIM1_TRG_COM_TIM11_IRQHandler
+ def_irq_default_handler TIM1_CC_IRQHandler
+ def_irq_default_handler TIM2_IRQHandler
+ def_irq_default_handler TIM3_IRQHandler
+ def_irq_default_handler TIM4_IRQHandler
+ def_irq_default_handler I2C1_EV_IRQHandler
+ def_irq_default_handler I2C1_ER_IRQHandler
+ def_irq_default_handler I2C2_EV_IRQHandler
+ def_irq_default_handler I2C2_ER_IRQHandler
+ def_irq_default_handler SPI1_IRQHandler
+ def_irq_default_handler SPI2_IRQHandler
+ def_irq_default_handler USART1_IRQHandler
+ def_irq_default_handler USART2_IRQHandler
+ def_irq_default_handler USART3_IRQHandler
+ def_irq_default_handler EXTI15_10_IRQHandler
+ def_irq_default_handler RTC_Alarm_IRQHandler
+ def_irq_default_handler OTG_FS_WKUP_IRQHandler
+ def_irq_default_handler TIM8_BRK_TIM12_IRQHandler
+ def_irq_default_handler TIM8_UP_TIM13_IRQHandler
+ def_irq_default_handler TIM8_TRG_COM_TIM14_IRQHandler
+ def_irq_default_handler TIM8_CC_IRQHandler
+ def_irq_default_handler DMA1_Stream7_IRQHandler
+ def_irq_default_handler FSMC_IRQHandler
+ def_irq_default_handler SDIO_IRQHandler
+ def_irq_default_handler TIM5_IRQHandler
+ def_irq_default_handler SPI3_IRQHandler
+ def_irq_default_handler UART4_IRQHandler
+ def_irq_default_handler UART5_IRQHandler
+ def_irq_default_handler TIM6_DAC_IRQHandler
+ def_irq_default_handler TIM7_IRQHandler
+ def_irq_default_handler DMA2_Stream0_IRQHandler
+ def_irq_default_handler DMA2_Stream1_IRQHandler
+ def_irq_default_handler DMA2_Stream2_IRQHandler
+ def_irq_default_handler DMA2_Stream3_IRQHandler
+ def_irq_default_handler DMA2_Stream4_IRQHandler
+ def_irq_default_handler ETH_IRQHandler
+ def_irq_default_handler ETH_WKUP_IRQHandler
+ def_irq_default_handler CAN2_TX_IRQHandler
+ def_irq_default_handler CAN2_RX0_IRQHandler
+ def_irq_default_handler CAN2_RX1_IRQHandler
+ def_irq_default_handler CAN2_SCE_IRQHandler
+ def_irq_default_handler OTG_FS_IRQHandler
+ def_irq_default_handler DMA2_Stream5_IRQHandler
+ def_irq_default_handler DMA2_Stream6_IRQHandler
+ def_irq_default_handler DMA2_Stream7_IRQHandler
+ def_irq_default_handler USART6_IRQHandler
+ def_irq_default_handler I2C3_EV_IRQHandler
+ def_irq_default_handler I2C3_ER_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_OUT_IRQHandler
+ def_irq_default_handler OTG_HS_EP1_IN_IRQHandler
+ def_irq_default_handler OTG_HS_WKUP_IRQHandler
+ def_irq_default_handler OTG_HS_IRQHandler
+ def_irq_default_handler DCMI_IRQHandler
+ def_irq_default_handler CRYP_IRQHandler
+ def_irq_default_handler HASH_RNG_IRQHandler
+ def_irq_default_handler FPU_IRQHandler
+ def_irq_default_handler DEF_IRQHandler
+
+ .end
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/90067c9a/hw/mcu/nordic/nrf51xxx/src/arch/cortex_m0/gcc_startup_nrf51.s
----------------------------------------------------------------------
diff --git a/hw/mcu/nordic/nrf51xxx/src/arch/cortex_m0/gcc_startup_nrf51.s b/hw/mcu/nordic/nrf51xxx/src/arch/cortex_m0/gcc_startup_nrf51.s
deleted file mode 100755
index fbc88bd..0000000
--- a/hw/mcu/nordic/nrf51xxx/src/arch/cortex_m0/gcc_startup_nrf51.s
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
-Copyright (c) 2015, Nordic Semiconductor ASA
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
-
-* Neither the name of Nordic Semiconductor ASA nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*
-NOTE: Template files (including this one) are application specific and therefore
-expected to be copied into the application project folder prior to its use!
-*/
-
- .syntax unified
- .arch armv6-m
-
- .section .stack
- .align 3
- .equ Stack_Size, 432
- .globl __StackTop
- .globl __StackLimit
-__StackLimit:
- .space Stack_Size
- .size __StackLimit, . - __StackLimit
-__StackTop:
- .size __StackTop, . - __StackTop
-
- .section .heap
- .align 3
-#ifdef __HEAP_SIZE
- .equ Heap_Size, __HEAP_SIZE
-#else
- .equ Heap_Size, 0
-#endif
- .globl __HeapBase
- .globl __HeapLimit
-__HeapBase:
- .if Heap_Size
- .space Heap_Size
- .endif
- .size __HeapBase, . - __HeapBase
-__HeapLimit:
- .size __HeapLimit, . - __HeapLimit
-
- .section .isr_vector
- .align 2
- .globl __isr_vector
-__isr_vector:
- .long __StackTop /* Top of Stack */
- .long Reset_Handler /* Reset Handler */
- .long _NMI_Handler /* NMI Handler */
- .long _HardFault_Handler /* Hard Fault Handler */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long _SVC_Handler /* SVCall Handler */
- .long 0 /* Reserved */
- .long 0 /* Reserved */
- .long _PendSV_Handler /* PendSV Handler */
- .long _SysTick_Handler /* SysTick Handler */
-
- /* External Interrupts */
- .long _POWER_CLOCK_IRQHandler
- .long _RADIO_IRQHandler
- .long _UART0_IRQHandler
- .long _SPI0_TWI0_IRQHandler
- .long _SPI1_TWI1_IRQHandler
- .long 0 /*Reserved */
- .long _GPIOTE_IRQHandler
- .long ADC_IRQHandler
- .long _TIMER0_IRQHandler
- .long _TIMER1_IRQHandler
- .long _TIMER2_IRQHandler
- .long _RTC0_IRQHandler
- .long _TEMP_IRQHandler
- .long _RNG_IRQHandler
- .long _ECB_IRQHandler
- .long _CCM_AAR_IRQHandler
- .long _WDT_IRQHandler
- .long _RTC1_IRQHandler
- .long _QDEC_IRQHandler
- .long _LPCOMP_IRQHandler
- .long _SWI0_IRQHandler
- .long _SWI1_IRQHandler
- .long _SWI2_IRQHandler
- .long _SWI3_IRQHandler
- .long _SWI4_IRQHandler
- .long _SWI5_IRQHandler
- .long 0 /*Reserved */
- .long 0 /*Reserved */
- .long 0 /*Reserved */
- .long 0 /*Reserved */
- .long 0 /*Reserved */
- .long 0 /*Reserved */
-
- .size __isr_vector, . - __isr_vector
-
-/* Reset Handler */
-
- .equ NRF_POWER_RAMON_ADDRESS, 0x40000524
- .equ NRF_POWER_RAMONB_ADDRESS, 0x40000554
- .equ NRF_POWER_RAMONx_RAMxON_ONMODE_Msk, 0x3
-
- .text
- .thumb
- .thumb_func
- .align 1
- .globl Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- .fnstart
-
-/* Make sure ALL RAM banks are powered on */
- MOVS R1, #NRF_POWER_RAMONx_RAMxON_ONMODE_Msk
-
- LDR R0, =NRF_POWER_RAMON_ADDRESS
- LDR R2, [R0]
- ORRS R2, R1
- STR R2, [R0]
-
- LDR R0, =NRF_POWER_RAMONB_ADDRESS
- LDR R2, [R0]
- ORRS R2, R1
- STR R2, [R0]
-
-/* Loop to copy data from read only memory to RAM. The ranges
- * of copy from/to are specified by following symbols evaluated in
- * linker script.
- * __etext: End of code section, i.e., begin of data sections to copy from.
- * __data_start__/__data_end__: RAM address range that data should be
- * copied to. Both must be aligned to 4 bytes boundary. */
-
- ldr r1, =__etext
- ldr r2, =__data_start__
- ldr r3, =__data_end__
-
- subs r3, r2
- ble .LC0
-
-.LC1:
- subs r3, 4
- ldr r0, [r1,r3]
- str r0, [r2,r3]
- bgt .LC1
-.LC0:
- LDR R0, =__HeapBase
- LDR R1, =__HeapLimit
- BL _sbrkInit
-
- LDR R0, =SystemInit
- BLX R0
- LDR R0, =_start
- BX R0
-
- .pool
- .cantunwind
- .fnend
- .size Reset_Handler,.-Reset_Handler
-
- .section ".text"
-
-
-/* Dummy Exception Handlers (infinite loops which can be modified) */
-
- .weak NMI_Handler
- .type NMI_Handler, %function
-NMI_Handler:
- B .
- .size NMI_Handler, . - NMI_Handler
-
- .weak SVC_Handler
- .type SVC_Handler, %function
-SVC_Handler:
- B .
- .size SVC_Handler, . - SVC_Handler
-
-
- .weak PendSV_Handler
- .type PendSV_Handler, %function
-PendSV_Handler:
- B .
- .size PendSV_Handler, . - PendSV_Handler
-
-
- .weak SysTick_Handler
- .type SysTick_Handler, %function
-SysTick_Handler:
- B .
- .size SysTick_Handler, . - SysTick_Handler
-
-/* Default handler. This uses the vector in the relocated vector table */
- .globl Default_Handler
- .type Default_Handler, %function
-Default_Handler:
- LDR R2, =__vector_tbl_reloc__
- MRS R0, PSR
- MOVS R1, #0x3F
- ANDS R0, R1
- LSLS R0, R0, #2
- LDR R0, [R0, R2]
- BX R0
- .size Default_Handler, . - Default_Handler
-
-/*
- * All of the following IRQ Handlers will point to the default handler unless
- * they are defined elsewhere.
- */
- .macro IRQ handler
- .weak \handler
- .set \handler, Default_Handler
- .endm
-
- IRQ _NMI_Handler
- IRQ _HardFault_Handler
- IRQ _SVC_Handler
- IRQ _PendSV_Handler
- IRQ _SysTick_Handler
- IRQ _POWER_CLOCK_IRQHandler
- IRQ _RADIO_IRQHandler
- IRQ _UART0_IRQHandler
- IRQ _SPI0_TWI0_IRQHandler
- IRQ _SPI1_TWI1_IRQHandler
- IRQ _GPIOTE_IRQHandler
- IRQ ADC_IRQHandler
- IRQ _TIMER0_IRQHandler
- IRQ _TIMER1_IRQHandler
- IRQ _TIMER2_IRQHandler
- IRQ _RTC0_IRQHandler
- IRQ _TEMP_IRQHandler
- IRQ _RNG_IRQHandler
- IRQ _ECB_IRQHandler
- IRQ _CCM_AAR_IRQHandler
- IRQ _WDT_IRQHandler
- IRQ _RTC1_IRQHandler
- IRQ _QDEC_IRQHandler
- IRQ _LPCOMP_IRQHandler
- IRQ _SWI0_IRQHandler
- IRQ _SWI1_IRQHandler
- IRQ _SWI2_IRQHandler
- IRQ _SWI3_IRQHandler
- IRQ _SWI4_IRQHandler
- IRQ _SWI5_IRQHandler
-
- .end