You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@nuttx.apache.org by Alin Jerpelea <je...@gmail.com> on 2026/03/17 17:56:37 UTC
Fwd: MODERATE for dev@nuttx.apache.org
---------- Forwarded message ----------
From: Satoru Akita <ww...@gmail.com>
To: acassis@apache.org
Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
Bcc:
Date: Wed, 11 Mar 2026 12:05:44 +0900
Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
Hi Alan and NuttX dev team,
My name is Satoru, and I am interested in the GSoC 2026 project "Dropbear
port (or other SSH Server/Client) to NuttX."
I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I use
NuttX from the application side — primarily with SPRESENSE and ESP32-based
edge AI camera systems. Being able to SSH into NuttX boards for remote
debugging and maintenance is something I have wanted myself, so this
project aligns naturally with my daily work.
I have already set up a development environment (Docker + QEMU ARM) and
have NuttX 12.7.0 running successfully. I have also done a preliminary
porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and PTY
gaps. The work-in-progress repository is here:
https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
This will be my first open-source contribution. I don't have specific
questions at this point, but if there is anything I should keep in mind
when preparing my proposal, I would appreciate any advice.
I will follow up once my proposal draft is ready.
Best regards,
Satoru
https://github.com/wwlapaki310
----------------------------------------------------------------------------------------
Satoru Akita
mail: wwlap24@gmail.com
tel: 07041572275
Re: MODERATE for dev@nuttx.apache.org
Posted by Tomek CEDRO <to...@cedro.info>.
I have created dedicated NX GSoC26 thread on dev@nuttx mlist to keep
all in one thread otherwise we will sink lets proceed with the
discussion over there plz :-)
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
On Wed, Mar 18, 2026 at 11:40 AM Tomek CEDRO <to...@cedro.info> wrote:
>
> Thanks Alin for verification and confirmation! :-)
>
> Alan you are listed as potential mentor, would you like to keep this
> task or can I take it? :-)
>
> Thanks :-)
> Tomek
>
> --
> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
>
> On Wed, Mar 18, 2026 at 9:42 AM Alin Jerpelea <je...@gmail.com> wrote:
> >
> > Hi Tomas,
> >
> > I can confirm that Satoru-san is legit
> > Thanks for showing terest to mentor him
> >
> > Best regards
> > Alin
> >
> > On Tue, Mar 17, 2026 at 7:18 PM Tomek CEDRO <to...@cedro.info> wrote:
> >
> > > If anyone knows this person to confirm he is able to cope with the
> > > task and can mentor then that sounds nice :-)
> > >
> > > --
> > > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
> > >
> > > On Tue, Mar 17, 2026 at 6:57 PM Alin Jerpelea <je...@gmail.com> wrote:
> > > >
> > > >
> > > > ---------- Forwarded message ----------
> > > > From: Satoru Akita <ww...@gmail.com>
> > > > To: acassis@apache.org
> > > > Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
> > > > Bcc:
> > > > Date: Wed, 11 Mar 2026 12:05:44 +0900
> > > > Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
> > > > Hi Alan and NuttX dev team,
> > > >
> > > > My name is Satoru, and I am interested in the GSoC 2026 project
> > > "Dropbear port (or other SSH Server/Client) to NuttX."
> > > >
> > > > I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I
> > > use NuttX from the application side — primarily with SPRESENSE and
> > > ESP32-based edge AI camera systems. Being able to SSH into NuttX boards for
> > > remote debugging and maintenance is something I have wanted myself, so this
> > > project aligns naturally with my daily work.
> > > >
> > > > I have already set up a development environment (Docker + QEMU ARM) and
> > > have NuttX 12.7.0 running successfully. I have also done a preliminary
> > > porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and PTY
> > > gaps. The work-in-progress repository is here:
> > > > https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
> > > >
> > > > This will be my first open-source contribution. I don't have specific
> > > questions at this point, but if there is anything I should keep in mind
> > > when preparing my proposal, I would appreciate any advice.
> > > >
> > > > I will follow up once my proposal draft is ready.
> > > >
> > > > Best regards,
> > > > Satoru
> > > > https://github.com/wwlapaki310
> > > >
> > > >
> > > >
> > > >
> > > ----------------------------------------------------------------------------------------
> > > > Satoru Akita
> > > > mail: wwlap24@gmail.com
> > > > tel: 07041572275
> > > >
> > > >
> > >
Re: MODERATE for dev@nuttx.apache.org
Posted by "Alan C. Assis" <ac...@gmail.com>.
Hi Tomek,
You can be the mentor and I will be the co-mentor.
I think almost all projects will list me as a possible mentor because I
created the JIRA tickets (except to rPI 4 project).
BR,
Alan
On Wed, Mar 18, 2026 at 7:41 AM Tomek CEDRO <to...@cedro.info> wrote:
> Thanks Alin for verification and confirmation! :-)
>
> Alan you are listed as potential mentor, would you like to keep this
> task or can I take it? :-)
>
> Thanks :-)
> Tomek
>
> --
> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
>
> On Wed, Mar 18, 2026 at 9:42 AM Alin Jerpelea <je...@gmail.com> wrote:
> >
> > Hi Tomas,
> >
> > I can confirm that Satoru-san is legit
> > Thanks for showing terest to mentor him
> >
> > Best regards
> > Alin
> >
> > On Tue, Mar 17, 2026 at 7:18 PM Tomek CEDRO <to...@cedro.info> wrote:
> >
> > > If anyone knows this person to confirm he is able to cope with the
> > > task and can mentor then that sounds nice :-)
> > >
> > > --
> > > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
> > >
> > > On Tue, Mar 17, 2026 at 6:57 PM Alin Jerpelea <je...@gmail.com>
> wrote:
> > > >
> > > >
> > > > ---------- Forwarded message ----------
> > > > From: Satoru Akita <ww...@gmail.com>
> > > > To: acassis@apache.org
> > > > Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
> > > > Bcc:
> > > > Date: Wed, 11 Mar 2026 12:05:44 +0900
> > > > Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
> > > > Hi Alan and NuttX dev team,
> > > >
> > > > My name is Satoru, and I am interested in the GSoC 2026 project
> > > "Dropbear port (or other SSH Server/Client) to NuttX."
> > > >
> > > > I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I
> > > use NuttX from the application side — primarily with SPRESENSE and
> > > ESP32-based edge AI camera systems. Being able to SSH into NuttX
> boards for
> > > remote debugging and maintenance is something I have wanted myself, so
> this
> > > project aligns naturally with my daily work.
> > > >
> > > > I have already set up a development environment (Docker + QEMU ARM)
> and
> > > have NuttX 12.7.0 running successfully. I have also done a preliminary
> > > porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and
> PTY
> > > gaps. The work-in-progress repository is here:
> > > > https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
> > > >
> > > > This will be my first open-source contribution. I don't have specific
> > > questions at this point, but if there is anything I should keep in mind
> > > when preparing my proposal, I would appreciate any advice.
> > > >
> > > > I will follow up once my proposal draft is ready.
> > > >
> > > > Best regards,
> > > > Satoru
> > > > https://github.com/wwlapaki310
> > > >
> > > >
> > > >
> > > >
> > >
> ----------------------------------------------------------------------------------------
> > > > Satoru Akita
> > > > mail: wwlap24@gmail.com
> > > > tel: 07041572275
> > > >
> > > >
> > >
>
Re: MODERATE for dev@nuttx.apache.org
Posted by Tomek CEDRO <to...@cedro.info>.
Thanks Alin for verification and confirmation! :-)
Alan you are listed as potential mentor, would you like to keep this
task or can I take it? :-)
Thanks :-)
Tomek
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
On Wed, Mar 18, 2026 at 9:42 AM Alin Jerpelea <je...@gmail.com> wrote:
>
> Hi Tomas,
>
> I can confirm that Satoru-san is legit
> Thanks for showing terest to mentor him
>
> Best regards
> Alin
>
> On Tue, Mar 17, 2026 at 7:18 PM Tomek CEDRO <to...@cedro.info> wrote:
>
> > If anyone knows this person to confirm he is able to cope with the
> > task and can mentor then that sounds nice :-)
> >
> > --
> > CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
> >
> > On Tue, Mar 17, 2026 at 6:57 PM Alin Jerpelea <je...@gmail.com> wrote:
> > >
> > >
> > > ---------- Forwarded message ----------
> > > From: Satoru Akita <ww...@gmail.com>
> > > To: acassis@apache.org
> > > Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
> > > Bcc:
> > > Date: Wed, 11 Mar 2026 12:05:44 +0900
> > > Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
> > > Hi Alan and NuttX dev team,
> > >
> > > My name is Satoru, and I am interested in the GSoC 2026 project
> > "Dropbear port (or other SSH Server/Client) to NuttX."
> > >
> > > I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I
> > use NuttX from the application side — primarily with SPRESENSE and
> > ESP32-based edge AI camera systems. Being able to SSH into NuttX boards for
> > remote debugging and maintenance is something I have wanted myself, so this
> > project aligns naturally with my daily work.
> > >
> > > I have already set up a development environment (Docker + QEMU ARM) and
> > have NuttX 12.7.0 running successfully. I have also done a preliminary
> > porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and PTY
> > gaps. The work-in-progress repository is here:
> > > https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
> > >
> > > This will be my first open-source contribution. I don't have specific
> > questions at this point, but if there is anything I should keep in mind
> > when preparing my proposal, I would appreciate any advice.
> > >
> > > I will follow up once my proposal draft is ready.
> > >
> > > Best regards,
> > > Satoru
> > > https://github.com/wwlapaki310
> > >
> > >
> > >
> > >
> > ----------------------------------------------------------------------------------------
> > > Satoru Akita
> > > mail: wwlap24@gmail.com
> > > tel: 07041572275
> > >
> > >
> >
Re: MODERATE for dev@nuttx.apache.org
Posted by Alin Jerpelea <je...@gmail.com>.
Hi Tomas,
I can confirm that Satoru-san is legit
Thanks for showing terest to mentor him
Best regards
Alin
On Tue, Mar 17, 2026 at 7:18 PM Tomek CEDRO <to...@cedro.info> wrote:
> If anyone knows this person to confirm he is able to cope with the
> task and can mentor then that sounds nice :-)
>
> --
> CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
>
> On Tue, Mar 17, 2026 at 6:57 PM Alin Jerpelea <je...@gmail.com> wrote:
> >
> >
> > ---------- Forwarded message ----------
> > From: Satoru Akita <ww...@gmail.com>
> > To: acassis@apache.org
> > Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
> > Bcc:
> > Date: Wed, 11 Mar 2026 12:05:44 +0900
> > Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
> > Hi Alan and NuttX dev team,
> >
> > My name is Satoru, and I am interested in the GSoC 2026 project
> "Dropbear port (or other SSH Server/Client) to NuttX."
> >
> > I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I
> use NuttX from the application side — primarily with SPRESENSE and
> ESP32-based edge AI camera systems. Being able to SSH into NuttX boards for
> remote debugging and maintenance is something I have wanted myself, so this
> project aligns naturally with my daily work.
> >
> > I have already set up a development environment (Docker + QEMU ARM) and
> have NuttX 12.7.0 running successfully. I have also done a preliminary
> porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and PTY
> gaps. The work-in-progress repository is here:
> > https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
> >
> > This will be my first open-source contribution. I don't have specific
> questions at this point, but if there is anything I should keep in mind
> when preparing my proposal, I would appreciate any advice.
> >
> > I will follow up once my proposal draft is ready.
> >
> > Best regards,
> > Satoru
> > https://github.com/wwlapaki310
> >
> >
> >
> >
> ----------------------------------------------------------------------------------------
> > Satoru Akita
> > mail: wwlap24@gmail.com
> > tel: 07041572275
> >
> >
>
Re: MODERATE for dev@nuttx.apache.org
Posted by Tomek CEDRO <to...@cedro.info>.
If anyone knows this person to confirm he is able to cope with the
task and can mentor then that sounds nice :-)
--
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
On Tue, Mar 17, 2026 at 6:57 PM Alin Jerpelea <je...@gmail.com> wrote:
>
>
> ---------- Forwarded message ----------
> From: Satoru Akita <ww...@gmail.com>
> To: acassis@apache.org
> Cc: dev@nuttx.apache.org, Satoru Akita <Sa...@sony.com>
> Bcc:
> Date: Wed, 11 Mar 2026 12:05:44 +0900
> Subject: GSoC 2026 Interest: Dropbear SSH port to NuttX
> Hi Alan and NuttX dev team,
>
> My name is Satoru, and I am interested in the GSoC 2026 project "Dropbear port (or other SSH Server/Client) to NuttX."
>
> I work as an EdgeAI engineer at Sony Semiconductor Solutions, where I use NuttX from the application side — primarily with SPRESENSE and ESP32-based edge AI camera systems. Being able to SSH into NuttX boards for remote debugging and maintenance is something I have wanted myself, so this project aligns naturally with my daily work.
>
> I have already set up a development environment (Docker + QEMU ARM) and have NuttX 12.7.0 running successfully. I have also done a preliminary porting analysis of Dropbear, focusing on the fork()/pthread, PAM, and PTY gaps. The work-in-progress repository is here:
> https://github.com/wwlapaki310/gsoc2026-nuttx-ssh
>
> This will be my first open-source contribution. I don't have specific questions at this point, but if there is anything I should keep in mind when preparing my proposal, I would appreciate any advice.
>
> I will follow up once my proposal draft is ready.
>
> Best regards,
> Satoru
> https://github.com/wwlapaki310
>
>
>
> ----------------------------------------------------------------------------------------
> Satoru Akita
> mail: wwlap24@gmail.com
> tel: 07041572275
>
>