You are viewing a plain text version of this content. The canonical link for it is here.
Posted to users@httpd.apache.org by Ed...@ita.org.mo on 2002/08/01 16:45:57 UTC

Re: [imp] New version of apache and php are good for work with IMP 3.x ?

Hello,

I have just finished re-compile and re-install apache 1.3.26, php 4.2.2,
openssl 0.9.6d and mod_ssl...
But when I start the apache by running :
apachectl startssl

php and https can't for work with apache, then I check the file "httpd.conf" :
I found :
<IfDefine SSL>
LoadModule ssl_module         libexec/libssl.so
LoadModule php4_module        libexec/libphp4.so
</IfDefine>

<IfDefine SSL>
AddModule mod_ssl.c
AddModule mod_php4.c
</IfDefine>

<IfDefine SSL>
Listen 80
Listen 443
</IfDefine>

And there are no the following lines into httpd.conf :

AddType application/x-httpd-php .php .php
AddType application/x-httpd-php-source .phps

So, I try to modify the setting by these :

#<IfDefine SSL>
LoadModule ssl_module         libexec/libssl.so
LoadModule php4_module        libexec/libphp4.so
#</IfDefine>

#<IfDefine SSL>
AddModule mod_ssl.c
AddModule mod_php4.c
#</IfDefine>

<IfDefine SSL>
#Listen 80
Listen 443
</IfDefine>
Listen 80

And then add these lines into httpd.conf also :

AddType application/x-httpd-php .php .php
AddType application/x-httpd-php-source .phps

After that, I try to restart the apache by : apachectl startssl...

OH...php is ok for work with apache, but https can't for work with apache again
!

So, can you help me more ?

Thanks.

Cristel Iofciu wrote:

> I know Apache 1.3.26, PHP 4.2.2 on Slack 8.0 work with IMP.
> I suggest you upgrade to Apache 1.3.26 too (take a look at CERT.org for the
> reason :)), and don't think RH6.2 will matter in this case...
>
> Cristel Iofciu
> NetAdmin
> -------------------------------
> eXonsite srl
> Constanta, 8700
> Soveja 19, Bl. V3 ap.24
> --------------------------------------
> [T] +40-0241-638300
> [M] +40-0722-924541
> [E] cristel@exonsite.ro
> [W] www.exonsite.ro
> --------------------------------------------
>
> Quoting EdwardSPL@ita.org.mo:
>
> > Hello,
> >
> > Do you know apache 1.3.22 and php 4.2.2 are good for work with IMP 3.x
> > under RH 6.2 system ?
> >
> > Thank for your help !
> >
> > Edward.
> >
> >
> >
> >
> > --
> > IMP mailing list
> > Frequently Asked Questions: http://horde.org/faq/
> > To unsubscribe, mail: imp-unsubscribe@lists.horde.org
> >
>
> ----------------------------------------------------------
> Acest mesaj a fost trimis prin  http://webmail.exonsite.ro



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Re: [imp] New version of apache and php are good for work with IMP 3.x ?

Posted by Ed...@ita.org.mo.
Also this web site ?
http://www.modssl.org/example/

EdwardSPL@ita.org.mo wrote:

> Have you ever visited this site ?
> http://www.linuxguruz.org/z.php?id=32&h=php+mysql+apache
>
> Why this user who can use SSL function ?
> The OpenSSL is 0.9.6d also...
>
> John Darin Holloway wrote:
>
> > You probably need that OpenSSL upgraded to 0.9.6e,  CERT released an
> > advisory this week.  As for your problem, does it attempt to connect to the
> > database when you load the page?  Perhaps it isn't able to maintain a
> > session under SSL.
> >
> > John Darin Holloway
> > Web Developer and System Administrator
> > Bluegrass Network, LLC
> > ----- Original Message -----
> > From: <Ed...@ita.org.mo>
> > Cc: <im...@lists.horde.org>; <us...@httpd.apache.org>;
> > <ph...@lists.php.net>
> > Sent: Thursday, August 01, 2002 10:45 AM
> > Subject: Re: [imp] New version of apache and php are good for work with IMP
> > 3.x ?
> >
> > > Hello,
> > >
> > > I have just finished re-compile and re-install apache 1.3.26, php 4.2.2,
> > > openssl 0.9.6d and mod_ssl...
> > > But when I start the apache by running :
> > > apachectl startssl
> > >
> > > php and https can't for work with apache, then I check the file
> > "httpd.conf" :
> > > I found :
> > > <IfDefine SSL>
> > > LoadModule ssl_module         libexec/libssl.so
> > > LoadModule php4_module        libexec/libphp4.so
> > > </IfDefine>
> > >
> > > <IfDefine SSL>
> > > AddModule mod_ssl.c
> > > AddModule mod_php4.c
> > > </IfDefine>
> > >
> > > <IfDefine SSL>
> > > Listen 80
> > > Listen 443
> > > </IfDefine>
> > >
> > > And there are no the following lines into httpd.conf :
> > >
> > > AddType application/x-httpd-php .php .php
> > > AddType application/x-httpd-php-source .phps
> > >
> > > So, I try to modify the setting by these :
> > >
> > > #<IfDefine SSL>
> > > LoadModule ssl_module         libexec/libssl.so
> > > LoadModule php4_module        libexec/libphp4.so
> > > #</IfDefine>
> > >
> > > #<IfDefine SSL>
> > > AddModule mod_ssl.c
> > > AddModule mod_php4.c
> > > #</IfDefine>
> > >
> > > <IfDefine SSL>
> > > #Listen 80
> > > Listen 443
> > > </IfDefine>
> > > Listen 80
> > >
> > > And then add these lines into httpd.conf also :
> > >
> > > AddType application/x-httpd-php .php .php
> > > AddType application/x-httpd-php-source .phps
> > >
> > > After that, I try to restart the apache by : apachectl startssl...
> > >
> > > OH...php is ok for work with apache, but https can't for work with apache
> > again
> > > !
> > >
> > > So, can you help me more ?
> > >
> > > Thanks.
> > >
> > > Cristel Iofciu wrote:
> > >
> > > > I know Apache 1.3.26, PHP 4.2.2 on Slack 8.0 work with IMP.
> > > > I suggest you upgrade to Apache 1.3.26 too (take a look at CERT.org for
> > the
> > > > reason :)), and don't think RH6.2 will matter in this case...
> > > >
> > > > Cristel Iofciu
> > > > NetAdmin
> > > > -------------------------------
> > > > eXonsite srl
> > > > Constanta, 8700
> > > > Soveja 19, Bl. V3 ap.24
> > > > --------------------------------------
> > > > [T] +40-0241-638300
> > > > [M] +40-0722-924541
> > > > [E] cristel@exonsite.ro
> > > > [W] www.exonsite.ro
> > > > --------------------------------------------
> > > >
> > > > Quoting EdwardSPL@ita.org.mo:
> > > >
> > > > > Hello,
> > > > >
> > > > > Do you know apache 1.3.22 and php 4.2.2 are good for work with IMP 3.x
> > > > > under RH 6.2 system ?
> > > > >
> > > > > Thank for your help !
> > > > >
> > > > > Edward.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > IMP mailing list
> > > > > Frequently Asked Questions: http://horde.org/faq/
> > > > > To unsubscribe, mail: imp-unsubscribe@lists.horde.org
> > > > >
> > > >
> > > > ----------------------------------------------------------
> > > > Acest mesaj a fost trimis prin  http://webmail.exonsite.ro
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > > For additional commands, e-mail: users-help@httpd.apache.org
> > >
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org

Re: [imp] New version of apache and php are good for work with IMP 3.x ?

Posted by Ed...@ita.org.mo.
Have you ever visited this site ?
http://www.linuxguruz.org/z.php?id=32&h=php+mysql+apache

Why this user who can use SSL function ?
The OpenSSL is 0.9.6d also...

John Darin Holloway wrote:

> You probably need that OpenSSL upgraded to 0.9.6e,  CERT released an
> advisory this week.  As for your problem, does it attempt to connect to the
> database when you load the page?  Perhaps it isn't able to maintain a
> session under SSL.
>
> John Darin Holloway
> Web Developer and System Administrator
> Bluegrass Network, LLC
> ----- Original Message -----
> From: <Ed...@ita.org.mo>
> Cc: <im...@lists.horde.org>; <us...@httpd.apache.org>;
> <ph...@lists.php.net>
> Sent: Thursday, August 01, 2002 10:45 AM
> Subject: Re: [imp] New version of apache and php are good for work with IMP
> 3.x ?
>
> > Hello,
> >
> > I have just finished re-compile and re-install apache 1.3.26, php 4.2.2,
> > openssl 0.9.6d and mod_ssl...
> > But when I start the apache by running :
> > apachectl startssl
> >
> > php and https can't for work with apache, then I check the file
> "httpd.conf" :
> > I found :
> > <IfDefine SSL>
> > LoadModule ssl_module         libexec/libssl.so
> > LoadModule php4_module        libexec/libphp4.so
> > </IfDefine>
> >
> > <IfDefine SSL>
> > AddModule mod_ssl.c
> > AddModule mod_php4.c
> > </IfDefine>
> >
> > <IfDefine SSL>
> > Listen 80
> > Listen 443
> > </IfDefine>
> >
> > And there are no the following lines into httpd.conf :
> >
> > AddType application/x-httpd-php .php .php
> > AddType application/x-httpd-php-source .phps
> >
> > So, I try to modify the setting by these :
> >
> > #<IfDefine SSL>
> > LoadModule ssl_module         libexec/libssl.so
> > LoadModule php4_module        libexec/libphp4.so
> > #</IfDefine>
> >
> > #<IfDefine SSL>
> > AddModule mod_ssl.c
> > AddModule mod_php4.c
> > #</IfDefine>
> >
> > <IfDefine SSL>
> > #Listen 80
> > Listen 443
> > </IfDefine>
> > Listen 80
> >
> > And then add these lines into httpd.conf also :
> >
> > AddType application/x-httpd-php .php .php
> > AddType application/x-httpd-php-source .phps
> >
> > After that, I try to restart the apache by : apachectl startssl...
> >
> > OH...php is ok for work with apache, but https can't for work with apache
> again
> > !
> >
> > So, can you help me more ?
> >
> > Thanks.
> >
> > Cristel Iofciu wrote:
> >
> > > I know Apache 1.3.26, PHP 4.2.2 on Slack 8.0 work with IMP.
> > > I suggest you upgrade to Apache 1.3.26 too (take a look at CERT.org for
> the
> > > reason :)), and don't think RH6.2 will matter in this case...
> > >
> > > Cristel Iofciu
> > > NetAdmin
> > > -------------------------------
> > > eXonsite srl
> > > Constanta, 8700
> > > Soveja 19, Bl. V3 ap.24
> > > --------------------------------------
> > > [T] +40-0241-638300
> > > [M] +40-0722-924541
> > > [E] cristel@exonsite.ro
> > > [W] www.exonsite.ro
> > > --------------------------------------------
> > >
> > > Quoting EdwardSPL@ita.org.mo:
> > >
> > > > Hello,
> > > >
> > > > Do you know apache 1.3.22 and php 4.2.2 are good for work with IMP 3.x
> > > > under RH 6.2 system ?
> > > >
> > > > Thank for your help !
> > > >
> > > > Edward.
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > IMP mailing list
> > > > Frequently Asked Questions: http://horde.org/faq/
> > > > To unsubscribe, mail: imp-unsubscribe@lists.horde.org
> > > >
> > >
> > > ----------------------------------------------------------
> > > Acest mesaj a fost trimis prin  http://webmail.exonsite.ro
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> > For additional commands, e-mail: users-help@httpd.apache.org
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Re: [imp] New version of apache and php are good for work with IMP 3.x ?

Posted by John Darin Holloway <jd...@blue.net>.
You probably need that OpenSSL upgraded to 0.9.6e,  CERT released an
advisory this week.  As for your problem, does it attempt to connect to the
database when you load the page?  Perhaps it isn't able to maintain a
session under SSL.

John Darin Holloway
Web Developer and System Administrator
Bluegrass Network, LLC
----- Original Message -----
From: <Ed...@ita.org.mo>
Cc: <im...@lists.horde.org>; <us...@httpd.apache.org>;
<ph...@lists.php.net>
Sent: Thursday, August 01, 2002 10:45 AM
Subject: Re: [imp] New version of apache and php are good for work with IMP
3.x ?


> Hello,
>
> I have just finished re-compile and re-install apache 1.3.26, php 4.2.2,
> openssl 0.9.6d and mod_ssl...
> But when I start the apache by running :
> apachectl startssl
>
> php and https can't for work with apache, then I check the file
"httpd.conf" :
> I found :
> <IfDefine SSL>
> LoadModule ssl_module         libexec/libssl.so
> LoadModule php4_module        libexec/libphp4.so
> </IfDefine>
>
> <IfDefine SSL>
> AddModule mod_ssl.c
> AddModule mod_php4.c
> </IfDefine>
>
> <IfDefine SSL>
> Listen 80
> Listen 443
> </IfDefine>
>
> And there are no the following lines into httpd.conf :
>
> AddType application/x-httpd-php .php .php
> AddType application/x-httpd-php-source .phps
>
> So, I try to modify the setting by these :
>
> #<IfDefine SSL>
> LoadModule ssl_module         libexec/libssl.so
> LoadModule php4_module        libexec/libphp4.so
> #</IfDefine>
>
> #<IfDefine SSL>
> AddModule mod_ssl.c
> AddModule mod_php4.c
> #</IfDefine>
>
> <IfDefine SSL>
> #Listen 80
> Listen 443
> </IfDefine>
> Listen 80
>
> And then add these lines into httpd.conf also :
>
> AddType application/x-httpd-php .php .php
> AddType application/x-httpd-php-source .phps
>
> After that, I try to restart the apache by : apachectl startssl...
>
> OH...php is ok for work with apache, but https can't for work with apache
again
> !
>
> So, can you help me more ?
>
> Thanks.
>
> Cristel Iofciu wrote:
>
> > I know Apache 1.3.26, PHP 4.2.2 on Slack 8.0 work with IMP.
> > I suggest you upgrade to Apache 1.3.26 too (take a look at CERT.org for
the
> > reason :)), and don't think RH6.2 will matter in this case...
> >
> > Cristel Iofciu
> > NetAdmin
> > -------------------------------
> > eXonsite srl
> > Constanta, 8700
> > Soveja 19, Bl. V3 ap.24
> > --------------------------------------
> > [T] +40-0241-638300
> > [M] +40-0722-924541
> > [E] cristel@exonsite.ro
> > [W] www.exonsite.ro
> > --------------------------------------------
> >
> > Quoting EdwardSPL@ita.org.mo:
> >
> > > Hello,
> > >
> > > Do you know apache 1.3.22 and php 4.2.2 are good for work with IMP 3.x
> > > under RH 6.2 system ?
> > >
> > > Thank for your help !
> > >
> > > Edward.
> > >
> > >
> > >
> > >
> > > --
> > > IMP mailing list
> > > Frequently Asked Questions: http://horde.org/faq/
> > > To unsubscribe, mail: imp-unsubscribe@lists.horde.org
> > >
> >
> > ----------------------------------------------------------
> > Acest mesaj a fost trimis prin  http://webmail.exonsite.ro
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org