You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@ofbiz.apache.org by Chatree Srichart <ch...@gmail.com> on 2010/11/18 11:24:59 UTC
How to configure the JposEntry for Epson's cash drawer for POS?
Hi community,
I have a problem concerning to configuring the Epson's cash drawer for POS.
I use an Epson TM-U220B printer. I can configure jpos.xml file for that
because there is a example configuration for Epson TM-T88III printer in the
jpos.xml. Unfortunately, there is not an example configuration for cash
drawer. Could you please tell me how to configure the JposEntry in the
jpos.xml file for a cash drawer?
My cash drawer is not an Epson's model but it work fine when I test with the
SetupPOS program of Epson.
This is my JposEntry for the Epson TM-U220B printer:
<JposEntry logicalName="TM-T88III">
<creation
factoryClass="jp.co.epson.jpos180.util.EpsonJposServiceInstanceFactory"
serviceClass="jp.co.epson.jpos180.ptr.T88III"/>
<vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
<jpos category="POSPrinter" version="1.8"/>
<product description="EPSON TM-T88III Printer Device Service"
name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.co.jp
"/>
<!--Other non JavaPOS required property (mostly vendor properties
and bus specific properties i.e. RS232 )-->
<prop name="dataBits" type="String" value="8"/>
<prop name="Parity" type="String" value="0"/>
<prop name="portName" type="String" value="COM1"/>
<prop name="U375Compatible" type="String" value="0"/>
<prop name="deviceBus" type="String" value="RS232"/>
<prop name="DataLen" type="String" value="1"/>
<prop name="UsedJAI" type="String" value="0"/>
<prop name="TimeoutTime" type="String" value="5000"/>
<prop name="baudRate" type="String" value="9600"/>
<prop name="TwoColor" type="String" value="0"/>
<prop name="PortType" type="String" value="0"/>
<prop name="UsedNVRAM" type="String" value="0"/>
<prop name="StopBit" type="String" value="1"/>
<prop name="RetryTime" type="String" value="100"/>
<prop name="ErrorOption" type="String" value="1"/>
<prop name="ReverseEject" type="String" value="0"/>
<prop name="SerialPowerWaitTime" type="String" value="500"/>
<prop name="InputWait" type="String" value="1"/>
<prop name="AnalysisLevel" type="String" value="1"/>
<prop name="BufferSize" type="String" value="2"/>
<prop name="DeviceDesc" type="String" value="EPSON TM-T88III
Printer"/>
<prop name="OutputLength" type="String" value="10"/>
<prop name="parity" type="String" value="None"/>
<prop name="stopBits" type="String" value="1"/>
<prop name="PortName" type="String" value="COM1"/> <!-- Windows -->
<!--prop name="PortName" type="String" value="/dev/ttyS0"/--> <!--
RS232 Linux -->
<!--prop name="PortName" type="String" value="/dev/usbtm0"/--> <!--
USB Linux, set before something like "sudo chmod 666 /dev/usbtm0" -->
<prop name="ReceiveTimeout" type="String" value="10"/>
<prop name="TwoByteCharacter" type="String" value="0"/>
<prop name="Page254UseCode" type="String" value="0"/>
<prop name="PhysicalDevice" type="String" value="TM-T88III"/>
<prop name="PaperSize" type="String" value="80"/>
<prop name="BaudRate" type="String" value="6"/>
<prop name="Page255UseCode" type="String" value="0"/>
<prop name="ServiceVersion" type="String" value="1.80"/>
<prop name="flowControl" type="String" value="None"/>
<prop name="FlowControl" type="String" value="1"/>
</JposEntry>
Thank you
Regards,
Chatree Srichart
Re: How to configure the JposEntry for Epson's cash drawer for POS?
Posted by Chatree Srichart <ch...@gmail.com>.
Hi Jacques,
Every thing is working fine. I found the configuration file (jpos.xml) for
cash drawer that contains JposEntry for cash drawer like this:
<JposEntry logicalName="CD-100M">
<creation
factoryClass="jp.co.epson.jpos182.util.EpsonJposServiceInstanceFactory"
serviceClass="jp.co.epson.jpos182.drw.CashDrawerService"/>
<vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
<jpos category="CashDrawer" version="1.11.1"/>
<product description="Printer controlled Cash Drawer" name="CD-100M"
url="http://www.epson.co.jp"/>
<prop name="PhysicalDevice" type="String" value="Standard"/>
<prop name="PulseONTime" type="String" value="100"/>
<prop name="PortName" type="String" value="COM1"/>
<prop name="ClosedStatusPhase" type="String" value="0"/>
<prop name="Uses" type="String" value="TM-U220B"/>
<prop name="PulseOFFTime" type="String" value="400"/>
<prop name="PortType" type="String" value="0"/>
<prop name="Parity" type="String" value="0"/>
<prop name="DeviceDesc" type="String" value="EPSON Standard
CashDrawer"/>
<prop name="ServiceVersion" type="String" value="1.82"/>
<prop name="TimeoutTime" type="String" value="5000"/>
<prop name="DataLen" type="String" value="1"/>
<prop name="RetryTime" type="String" value="100"/>
<prop name="ReceiveTimeout" type="String" value="10"/>
<prop name="PinNO" type="String" value="0"/>
<prop name="deviceBus" type="String" value="Unknown"/>
<prop name="FlowControl" type="String" value="1"/>
<prop name="StopBit" type="String" value="1"/>
<prop name="BaudRate" type="String" value="7"/>
<prop name="OutputLength" type="String" value="10"/>
</JposEntry>
It's work well.
Thank you for your attention.
Regards,
Chatree Srichart
On Fri, Nov 19, 2010 at 4:06 PM, Jacques Le Roux <
jacques.le.roux@les7arts.com> wrote:
> Hi Chatree,
>
> I'm off today, but I will try to help you this evening if needed. Normally
> you don't need to worry about cash drawers. You simply connect them through
> the printer...
>
> Jacques
>
> From: "Chatree Srichart" <ch...@gmail.com>
>
> I have tried to create a new JposEntry for Epson cash drawer without
>> property like this:
>>
>> <JposEntry logicalName="CD-100M">
>> <creation
>> factoryClass="jp.co.epson.jpos182.util.EpsonJposServiceInstanceFactory"
>> serviceClass="jp.co.epson.jpos182.drw.CashDrawerService"/>
>> <vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
>> <jpos category="CashDrawer" version="1.11.1"/>
>> <product description="Printer controlled Cash Drawer" name="CD-100M"
>> url="http://www.epson.co.jp"/>
>> </JposEntry>
>>
>> But I got error like this:
>>
>> Caused by: java.lang.NullPointerException
>> at java.lang.String.lastIndexOf(Unknown Source)
>> at java.lang.String.lastIndexOf(Unknown Source)
>> at jp.co.epson.jpos182.drw.CashDrawerService.readJSD(CashDrawerS
>> at jp.co.epson.jpos182.drw.CashDrawerService.open(CashDrawerServ
>> at jpos.BaseJposControl.open(Unknown Source)
>> at org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:47
>> at org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>
>> It seem like the CashDrawerService need a JSD property to be specified.
>> But
>> I don't know the property's name and value for the JSD.
>>
>> Regards,
>> Chatree Srichart
>>
>>
>
>
Re: How to configure the JposEntry for Epson's cash drawer for POS?
Posted by Jacques Le Roux <ja...@les7arts.com>.
Hi Chatree,
I'm off today, but I will try to help you this evening if needed. Normally you don't need to worry about cash drawers. You simply
connect them through the printer...
Jacques
From: "Chatree Srichart" <ch...@gmail.com>
>I have tried to create a new JposEntry for Epson cash drawer without
> property like this:
>
> <JposEntry logicalName="CD-100M">
> <creation
> factoryClass="jp.co.epson.jpos182.util.EpsonJposServiceInstanceFactory"
> serviceClass="jp.co.epson.jpos182.drw.CashDrawerService"/>
> <vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
> <jpos category="CashDrawer" version="1.11.1"/>
> <product description="Printer controlled Cash Drawer" name="CD-100M"
> url="http://www.epson.co.jp"/>
> </JposEntry>
>
> But I got error like this:
>
> Caused by: java.lang.NullPointerException
> at java.lang.String.lastIndexOf(Unknown Source)
> at java.lang.String.lastIndexOf(Unknown Source)
> at jp.co.epson.jpos182.drw.CashDrawerService.readJSD(CashDrawerS
> at jp.co.epson.jpos182.drw.CashDrawerService.open(CashDrawerServ
> at jpos.BaseJposControl.open(Unknown Source)
> at org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:47
> at org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>
> It seem like the CashDrawerService need a JSD property to be specified. But
> I don't know the property's name and value for the JSD.
>
> Regards,
> Chatree Srichart
>
Re: How to configure the JposEntry for Epson's cash drawer for POS?
Posted by Chatree Srichart <ch...@gmail.com>.
I have tried to create a new JposEntry for Epson cash drawer without
property like this:
<JposEntry logicalName="CD-100M">
<creation
factoryClass="jp.co.epson.jpos182.util.EpsonJposServiceInstanceFactory"
serviceClass="jp.co.epson.jpos182.drw.CashDrawerService"/>
<vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
<jpos category="CashDrawer" version="1.11.1"/>
<product description="Printer controlled Cash Drawer" name="CD-100M"
url="http://www.epson.co.jp"/>
</JposEntry>
But I got error like this:
Caused by: java.lang.NullPointerException
at java.lang.String.lastIndexOf(Unknown Source)
at java.lang.String.lastIndexOf(Unknown Source)
at jp.co.epson.jpos182.drw.CashDrawerService.readJSD(CashDrawerS
at jp.co.epson.jpos182.drw.CashDrawerService.open(CashDrawerServ
at jpos.BaseJposControl.open(Unknown Source)
at org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:47
at org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
It seem like the CashDrawerService need a JSD property to be specified. But
I don't know the property's name and value for the JSD.
Regards,
Chatree Srichart
Re: How to configure the JposEntry for Epson's cash drawer for POS?
Posted by Chatree Srichart <ch...@gmail.com>.
Ops... Sorry, I put wrong JposEntry. That is example for TM-T88III.
This for TM-U220B :
<JposEntry logicalName="TM-U220B">
<creation
factoryClass="jp.co.epson.jpos182.util.EpsonJposServiceInstanceFactory"
serviceClass="jp.co.epson.jpos182.ptr.U220B"/>
<vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
<jpos category="POSPrinter" version="1.8"/>
<product description="EPSON TM-U220B Printer Device Service"
name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.co.jp
"/>
<!--Other non JavaPOS required property (mostly vendor properties
and bus specific properties i.e. RS232 )-->
<prop name="dataBits" type="String" value="8"/>
<prop name="Parity" type="String" value="0"/>
<prop name="portName" type="String" value="COM1"/>
<prop name="U375Compatible" type="String" value="0"/>
<prop name="deviceBus" type="String" value="RS232"/>
<prop name="DataLen" type="String" value="1"/>
<prop name="UsedJAI" type="String" value="0"/>
<prop name="TimeoutTime" type="String" value="5000"/>
<prop name="baudRate" type="String" value="9600"/>
<prop name="TwoColor" type="String" value="0"/>
<prop name="PortType" type="String" value="0"/>
<prop name="UsedNVRAM" type="String" value="0"/>
<prop name="StopBit" type="String" value="1"/>
<prop name="RetryTime" type="String" value="100"/>
<prop name="ErrorOption" type="String" value="1"/>
<prop name="ReverseEject" type="String" value="0"/>
<prop name="SerialPowerWaitTime" type="String" value="500"/>
<prop name="InputWait" type="String" value="1"/>
<prop name="AnalysisLevel" type="String" value="1"/>
<prop name="BufferSize" type="String" value="2"/>
<prop name="DeviceDesc" type="String" value="EPSON TM-U220B
Printer"/>
<prop name="OutputLength" type="String" value="10"/>
<prop name="parity" type="String" value="None"/>
<prop name="stopBits" type="String" value="1"/>
<prop name="PortName" type="String" value="COM1"/> <!-- Windows -->
<!--prop name="PortName" type="String" value="/dev/ttyS0"/--> <!--
RS232 Linux -->
<!--prop name="PortName" type="String" value="/dev/usbtm0"/--> <!--
USB Linux, set before something like "sudo chmod 666 /dev/usbtm0" -->
<prop name="ReceiveTimeout" type="String" value="10"/>
<prop name="TwoByteCharacter" type="String" value="0"/>
<prop name="Page254UseCode" type="String" value="0"/>
<prop name="PhysicalDevice" type="String" value="TM-U220B"/>
<prop name="PaperSize" type="String" value="80"/>
<prop name="BaudRate" type="String" value="6"/>
<prop name="Page255UseCode" type="String" value="0"/>
<prop name="ServiceVersion" type="String" value="1.80"/>
<prop name="flowControl" type="String" value="None"/>
<prop name="FlowControl" type="String" value="1"/>
</JposEntry>
On Thu, Nov 18, 2010 at 5:24 PM, Chatree Srichart <
chatree.srichart@gmail.com> wrote:
> Hi community,
>
> I have a problem concerning to configuring the Epson's cash drawer for POS.
> I use an Epson TM-U220B printer. I can configure jpos.xml file for that
> because there is a example configuration for Epson TM-T88III printer in the
> jpos.xml. Unfortunately, there is not an example configuration for cash
> drawer. Could you please tell me how to configure the JposEntry in the
> jpos.xml file for a cash drawer?
>
> My cash drawer is not an Epson's model but it work fine when I test with
> the SetupPOS program of Epson.
>
> This is my JposEntry for the Epson TM-U220B printer:
>
> <JposEntry logicalName="TM-T88III">
> <creation
> factoryClass="jp.co.epson.jpos180.util.EpsonJposServiceInstanceFactory"
> serviceClass="jp.co.epson.jpos180.ptr.T88III"/>
> <vendor name="SEIKO EPSON" url="http://www.epson.co.jp"/>
> <jpos category="POSPrinter" version="1.8"/>
> <product description="EPSON TM-T88III Printer Device Service"
> name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.co.jp
> "/>
>
> <!--Other non JavaPOS required property (mostly vendor properties
> and bus specific properties i.e. RS232 )-->
> <prop name="dataBits" type="String" value="8"/>
> <prop name="Parity" type="String" value="0"/>
> <prop name="portName" type="String" value="COM1"/>
> <prop name="U375Compatible" type="String" value="0"/>
> <prop name="deviceBus" type="String" value="RS232"/>
> <prop name="DataLen" type="String" value="1"/>
> <prop name="UsedJAI" type="String" value="0"/>
> <prop name="TimeoutTime" type="String" value="5000"/>
> <prop name="baudRate" type="String" value="9600"/>
> <prop name="TwoColor" type="String" value="0"/>
> <prop name="PortType" type="String" value="0"/>
> <prop name="UsedNVRAM" type="String" value="0"/>
> <prop name="StopBit" type="String" value="1"/>
> <prop name="RetryTime" type="String" value="100"/>
> <prop name="ErrorOption" type="String" value="1"/>
> <prop name="ReverseEject" type="String" value="0"/>
> <prop name="SerialPowerWaitTime" type="String" value="500"/>
> <prop name="InputWait" type="String" value="1"/>
> <prop name="AnalysisLevel" type="String" value="1"/>
> <prop name="BufferSize" type="String" value="2"/>
> <prop name="DeviceDesc" type="String" value="EPSON TM-T88III
> Printer"/>
> <prop name="OutputLength" type="String" value="10"/>
> <prop name="parity" type="String" value="None"/>
> <prop name="stopBits" type="String" value="1"/>
> <prop name="PortName" type="String" value="COM1"/> <!-- Windows
> -->
> <!--prop name="PortName" type="String" value="/dev/ttyS0"/--> <!--
> RS232 Linux -->
> <!--prop name="PortName" type="String" value="/dev/usbtm0"/--> <!--
> USB Linux, set before something like "sudo chmod 666 /dev/usbtm0" -->
> <prop name="ReceiveTimeout" type="String" value="10"/>
> <prop name="TwoByteCharacter" type="String" value="0"/>
> <prop name="Page254UseCode" type="String" value="0"/>
> <prop name="PhysicalDevice" type="String" value="TM-T88III"/>
> <prop name="PaperSize" type="String" value="80"/>
> <prop name="BaudRate" type="String" value="6"/>
> <prop name="Page255UseCode" type="String" value="0"/>
> <prop name="ServiceVersion" type="String" value="1.80"/>
> <prop name="flowControl" type="String" value="None"/>
> <prop name="FlowControl" type="String" value="1"/>
> </JposEntry>
>
> Thank you
>
> Regards,
> Chatree Srichart
>