You are viewing a plain text version of this content. The canonical link for it is here.
Posted to commits@ambari.apache.org by ma...@apache.org on 2013/02/15 23:59:56 UTC
svn commit: r1446803 [3/3] - in
/incubator/ambari/trunk/ambari-server/src/main/resources/stacks: HDP/1.2.2/
HDP/1.2.2/repos/ HDP/1.2.2/services/ HDP/1.2.2/services/GANGLIA/
HDP/1.2.2/services/HBASE/ HDP/1.2.2/services/HBASE/configuration/
HDP/1.2.2/ser...
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hadoop-policy.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hadoop-policy.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hadoop-policy.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hadoop-policy.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,134 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- Put site-specific property overrides in this file. -->
+
+<configuration>
+ <property>
+ <name>security.client.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for ClientProtocol, which is used by user code
+ via the DistributedFileSystem.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.client.datanode.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for ClientDatanodeProtocol, the client-to-datanode protocol
+ for block recovery.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.datanode.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for DatanodeProtocol, which is used by datanodes to
+ communicate with the namenode.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.inter.datanode.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for InterDatanodeProtocol, the inter-datanode protocol
+ for updating generation timestamp.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.namenode.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for NamenodeProtocol, the protocol used by the secondary
+ namenode to communicate with the namenode.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.inter.tracker.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for InterTrackerProtocol, used by the tasktrackers to
+ communicate with the jobtracker.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.job.submission.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for JobSubmissionProtocol, used by job clients to
+ communciate with the jobtracker for job submission, querying job status etc.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.task.umbilical.protocol.acl</name>
+ <value>*</value>
+ <description>ACL for TaskUmbilicalProtocol, used by the map and reduce
+ tasks to communicate with the parent tasktracker.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.admin.operations.protocol.acl</name>
+ <value></value>
+ <description>ACL for AdminOperationsProtocol. Used for admin commands.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+ <property>
+ <name>security.refresh.usertogroups.mappings.protocol.acl</name>
+ <value></value>
+ <description>ACL for RefreshUserMappingsProtocol. Used to refresh
+ users mappings. The ACL is a comma-separated list of user and
+ group names. The user and group list is separated by a blank. For
+ e.g. "alice,bob users,wheel". A special value of "*" means all
+ users are allowed.</description>
+ </property>
+
+<property>
+ <name>security.refresh.policy.protocol.acl</name>
+ <value></value>
+ <description>ACL for RefreshAuthorizationPolicyProtocol, used by the
+ dfsadmin and mradmin commands to refresh the security policy in-effect.
+ The ACL is a comma-separated list of user and group names. The user and
+ group list is separated by a blank. For e.g. "alice,bob users,wheel".
+ A special value of "*" means all users are allowed.</description>
+ </property>
+
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hdfs-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hdfs-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hdfs-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/configuration/hdfs-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,415 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- Put site-specific property overrides in this file. -->
+
+<configuration>
+
+<!-- file system properties -->
+
+ <property>
+ <name>dfs.name.dir</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>Determines where on the local filesystem the DFS name node
+ should store the name table. If this is a comma-delimited list
+ of directories then the name table is replicated in all of the
+ directories, for redundancy. </description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.support.append</name>
+ <value></value>
+ <description>to enable dfs append</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.webhdfs.enabled</name>
+ <value></value>
+ <description>to enable webhdfs</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.datanode.socket.write.timeout</name>
+ <value>0</value>
+ <description>DFS Client write socket timeout</description>
+ </property>
+
+ <property>
+ <name>dfs.datanode.failed.volumes.tolerated</name>
+ <value></value>
+ <description>#of failed disks dn would tolerate</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.block.local-path-access.user</name>
+ <value></value>
+ <description>the user who is allowed to perform short
+ circuit reads.
+ </description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.data.dir</name>
+ <value></value>
+ <description>Determines where on the local filesystem an DFS data node
+ should store its blocks. If this is a comma-delimited
+ list of directories, then data will be stored in all named
+ directories, typically on different devices.
+ Directories that do not exist are ignored.
+ </description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>dfs.hosts.exclude</name>
+ <value></value>
+ <description>Names a file that contains a list of hosts that are
+ not permitted to connect to the namenode. The full pathname of the
+ file must be specified. If the value is empty, no hosts are
+ excluded.</description>
+ </property>
+
+ <property>
+ <name>dfs.hosts</name>
+ <value></value>
+ <description>Names a file that contains a list of hosts that are
+ permitted to connect to the namenode. The full pathname of the file
+ must be specified. If the value is empty, all hosts are
+ permitted.</description>
+ </property>
+
+ <property>
+ <name>dfs.replication.max</name>
+ <value>50</value>
+ <description>Maximal block replication.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.replication</name>
+ <value></value>
+ <description>Default block replication.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.heartbeat.interval</name>
+ <value>3</value>
+ <description>Determines datanode heartbeat interval in seconds.</description>
+ </property>
+
+ <property>
+ <name>dfs.safemode.threshold.pct</name>
+ <value>1.0f</value>
+ <description>
+ Specifies the percentage of blocks that should satisfy
+ the minimal replication requirement defined by dfs.replication.min.
+ Values less than or equal to 0 mean not to start in safe mode.
+ Values greater than 1 will make safe mode permanent.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.balance.bandwidthPerSec</name>
+ <value>6250000</value>
+ <description>
+ Specifies the maximum amount of bandwidth that each datanode
+ can utilize for the balancing purpose in term of
+ the number of bytes per second.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.datanode.address</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>dfs.datanode.http.address</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>dfs.block.size</name>
+ <value>134217728</value>
+ <description>The default block size for new files.</description>
+ </property>
+
+ <property>
+ <name>dfs.http.address</name>
+ <value></value>
+<description>The name of the default file system. Either the
+literal string "local" or a host:port for NDFS.</description>
+<final>true</final>
+</property>
+
+<property>
+<name>dfs.datanode.du.reserved</name>
+<!-- cluster variant -->
+<value></value>
+<description>Reserved space in bytes per volume. Always leave this much space free for non dfs use.
+</description>
+</property>
+
+<property>
+<name>dfs.datanode.ipc.address</name>
+<value>0.0.0.0:8010</value>
+<description>
+The datanode ipc server address and port.
+If the port is 0 then the server will start on a free port.
+</description>
+</property>
+
+<property>
+<name>dfs.blockreport.initialDelay</name>
+<value>120</value>
+<description>Delay for first block report in seconds.</description>
+</property>
+
+<property>
+<name>dfs.datanode.du.pct</name>
+<value>0.85f</value>
+<description>When calculating remaining space, only use this percentage of the real available space
+</description>
+</property>
+
+<property>
+<name>dfs.namenode.handler.count</name>
+<value>40</value>
+<description>The number of server threads for the namenode.</description>
+</property>
+
+<property>
+<name>dfs.datanode.max.xcievers</name>
+<value>4096</value>
+<description>PRIVATE CONFIG VARIABLE</description>
+</property>
+
+<!-- Permissions configuration -->
+
+<property>
+<name>dfs.umaskmode</name>
+<value>077</value>
+<description>
+The octal umask used when creating files and directories.
+</description>
+</property>
+
+<property>
+<name>dfs.web.ugi</name>
+<!-- cluster variant -->
+<value>gopher,gopher</value>
+<description>The user account used by the web interface.
+Syntax: USERNAME,GROUP1,GROUP2, ...
+</description>
+</property>
+
+<property>
+<name>dfs.permissions</name>
+<value>true</value>
+<description>
+If "true", enable permission checking in HDFS.
+If "false", permission checking is turned off,
+but all other behavior is unchanged.
+Switching from one parameter value to the other does not change the mode,
+owner or group of files or directories.
+</description>
+</property>
+
+<property>
+<name>dfs.permissions.supergroup</name>
+<value>hdfs</value>
+<description>The name of the group of super-users.</description>
+</property>
+
+<property>
+<name>dfs.namenode.handler.count</name>
+<value>100</value>
+<description>Added to grow Queue size so that more client connections are allowed</description>
+</property>
+
+<property>
+<name>ipc.server.max.response.size</name>
+<value>5242880</value>
+</property>
+<property>
+<name>dfs.block.access.token.enable</name>
+<value>true</value>
+<description>
+If "true", access tokens are used as capabilities for accessing datanodes.
+If "false", no access tokens are checked on accessing datanodes.
+</description>
+</property>
+
+<property>
+<name>dfs.namenode.kerberos.principal</name>
+<value></value>
+<description>
+Kerberos principal name for the NameNode
+</description>
+</property>
+
+<property>
+<name>dfs.secondary.namenode.kerberos.principal</name>
+<value></value>
+ <description>
+ Kerberos principal name for the secondary NameNode.
+ </description>
+ </property>
+
+
+<!--
+ This is KRB DOMAIN specific. The FQDN of the namenode has to be mentioned.
+-->
+ <property>
+ <name>dfs.namenode.kerberos.https.principal</name>
+ <value></value>
+ <description>The Kerberos principal for the host that the NameNode runs on.</description>
+
+ </property>
+
+ <property>
+ <name>dfs.secondary.namenode.kerberos.https.principal</name>
+ <value></value>
+ <description>The Kerberos principal for the hostthat the secondary NameNode runs on.</description>
+
+ </property>
+
+ <property>
+ <!-- cluster variant -->
+ <name>dfs.secondary.http.address</name>
+ <value></value>
+ <description>Address of secondary namenode web server</description>
+ </property>
+
+ <property>
+ <name>dfs.secondary.https.port</name>
+ <value>50490</value>
+ <description>The https port where secondary-namenode binds</description>
+ </property>
+
+ <property>
+ <name>dfs.web.authentication.kerberos.principal</name>
+ <value></value>
+ <description>
+ The HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint.
+ The HTTP Kerberos principal MUST start with 'HTTP/' per Kerberos
+ HTTP SPENGO specification.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.web.authentication.kerberos.keytab</name>
+ <value></value>
+ <description>
+ The Kerberos keytab file with the credentials for the
+ HTTP Kerberos principal used by Hadoop-Auth in the HTTP endpoint.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.datanode.kerberos.principal</name>
+ <value></value>
+ <description>
+ The Kerberos principal that the DataNode runs as. "_HOST" is replaced by the real host name.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.namenode.keytab.file</name>
+ <value></value>
+ <description>
+ Combined keytab file containing the namenode service and host principals.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.secondary.namenode.keytab.file</name>
+ <value></value>
+ <description>
+ Combined keytab file containing the namenode service and host principals.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.datanode.keytab.file</name>
+ <value></value>
+ <description>
+ The filename of the keytab file for the DataNode.
+ </description>
+ </property>
+
+ <property>
+ <name>dfs.https.port</name>
+ <value>50470</value>
+ <description>The https port where namenode binds</description>
+
+ </property>
+
+ <property>
+ <name>dfs.https.address</name>
+ <value></value>
+ <description>The https address where namenode binds</description>
+
+ </property>
+
+ <property>
+ <name>dfs.datanode.data.dir.perm</name>
+ <value></value>
+<description>The permissions that should be there on dfs.data.dir
+directories. The datanode will not come up if the permissions are
+different on existing dfs.data.dir directories. If the directories
+don't exist, they will be created with this permission.</description>
+ </property>
+
+ <property>
+ <name>dfs.access.time.precision</name>
+ <value>0</value>
+ <description>The access time for HDFS file is precise upto this value.
+ The default value is 1 hour. Setting a value of 0 disables
+ access times for HDFS.
+ </description>
+</property>
+
+<property>
+ <name>dfs.cluster.administrators</name>
+ <value> hdfs</value>
+ <description>ACL for who all can view the default servlets in the HDFS</description>
+</property>
+
+<property>
+ <name>ipc.server.read.threadpool.size</name>
+ <value>5</value>
+ <description></description>
+</property>
+
+<property>
+ <name>dfs.datanode.failed.volumes.tolerated</name>
+ <value>0</value>
+ <description>Number of failed disks datanode would tolerate</description>
+</property>
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HDFS/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,46 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>Apache Hadoop Distributed File System</comment>
+ <version>1.1.2</version>
+
+ <components>
+ <component>
+ <name>NAMENODE</name>
+ <category>MASTER</category>
+ </component>
+
+ <component>
+ <name>DATANODE</name>
+ <category>SLAVE</category>
+ </component>
+
+ <component>
+ <name>SECONDARY_NAMENODE</name>
+ <category>MASTER</category>
+ </component>
+
+ <component>
+ <name>HDFS_CLIENT</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/configuration/hive-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/configuration/hive-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/configuration/hive-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/configuration/hive-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,138 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements. See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to You under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+<configuration>
+ <property>
+ <name>hive.metastore.local</name>
+ <value>false</value>
+ <description>controls whether to connect to remove metastore server or
+ open a new metastore server in Hive Client JVM</description>
+ </property>
+
+ <property>
+ <name>javax.jdo.option.ConnectionURL</name>
+ <value></value>
+ <description>JDBC connect string for a JDBC metastore</description>
+ </property>
+
+ <property>
+ <name>javax.jdo.option.ConnectionDriverName</name>
+ <value>com.mysql.jdbc.Driver</value>
+ <description>Driver class name for a JDBC metastore</description>
+ </property>
+
+ <property>
+ <name>javax.jdo.option.ConnectionUserName</name>
+ <value></value>
+ <description>username to use against metastore database</description>
+ </property>
+
+ <property>
+ <name>javax.jdo.option.ConnectionPassword</name>
+ <value></value>
+ <description>password to use against metastore database</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.warehouse.dir</name>
+ <value>/apps/hive/warehouse</value>
+ <description>location of default database for the warehouse</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.sasl.enabled</name>
+ <value></value>
+ <description>If true, the metastore thrift interface will be secured with SASL.
+ Clients must authenticate with Kerberos.</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.kerberos.keytab.file</name>
+ <value></value>
+ <description>The path to the Kerberos Keytab file containing the metastore
+ thrift server's service principal.</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.kerberos.principal</name>
+ <value></value>
+ <description>The service principal for the metastore thrift server. The special
+ string _HOST will be replaced automatically with the correct host name.</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.cache.pinobjtypes</name>
+ <value>Table,Database,Type,FieldSchema,Order</value>
+ <description>List of comma separated metastore object types that should be pinned in the cache</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.uris</name>
+ <value></value>
+ <description>URI for client to contact metastore server</description>
+ </property>
+
+ <property>
+ <name>hive.semantic.analyzer.factory.impl</name>
+ <value>org.apache.hivealog.cli.HCatSemanticAnalyzerFactory</value>
+ <description>controls which SemanticAnalyzerFactory implemenation class is used by CLI</description>
+ </property>
+
+ <property>
+ <name>hadoop.clientside.fs.operations</name>
+ <value>true</value>
+ <description>FS operations are owned by client</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.client.socket.timeout</name>
+ <value>60</value>
+ <description>MetaStore Client socket timeout in seconds</description>
+ </property>
+
+ <property>
+ <name>hive.metastore.execute.setugi</name>
+ <value>true</value>
+ <description>In unsecure mode, setting this property to true will cause the metastore to execute DFS operations using the client's reported user and group permissions. Note that this property must be set on both the client and server sides. Further note that its best effort. If client sets its to true and server sets it to false, client setting will be ignored.</description>
+ </property>
+
+ <property>
+ <name>hive.security.authorization.enabled</name>
+ <value>true</value>
+ <description>enable or disable the hive client authorization</description>
+ </property>
+
+ <property>
+ <name>hive.security.authorization.manager</name>
+ <value>org.apache.hcatalog.security.HdfsAuthorizationProvider</value>
+ <description>the hive client authorization manager class name.
+ The user defined authorization class should implement interface org.apache.hadoop.hive.ql.security.authorization.HiveAuthorizationProvider. </description>
+ </property>
+
+ <property>
+ <name>hive.server2.enable.doAs</name>
+ <value>true</value>
+ </property>
+
+ <property>
+ <name>fs.hdfs.impl.disable.cache</name>
+ <value>true</value>
+ </property>
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/HIVE/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,43 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>Data warehouse system for ad-hoc queries & analysis of large datasets and table & storage management service</comment>
+ <version>0.10.0</version>
+
+ <components>
+ <component>
+ <name>HIVE_METASTORE</name>
+ <category>MASTER</category>
+ </component>
+ <component>
+ <name>HIVE_SERVER</name>
+ <category>MASTER</category>
+ </component>
+ <component>
+ <name>MYSQL_SERVER</name>
+ <category>MASTER</category>
+ </component>
+ <component>
+ <name>HIVE_CLIENT</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/capacity-scheduler.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/capacity-scheduler.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/capacity-scheduler.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/capacity-scheduler.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,195 @@
+<?xml version="1.0"?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- This is the configuration file for the resource manager in Hadoop. -->
+<!-- You can configure various scheduling parameters related to queues. -->
+<!-- The properties for a queue follow a naming convention,such as, -->
+<!-- mapred.capacity-scheduler.queue.<queue-name>.property-name. -->
+
+<configuration>
+
+ <property>
+ <name>mapred.capacity-scheduler.maximum-system-jobs</name>
+ <value>3000</value>
+ <description>Maximum number of jobs in the system which can be initialized,
+ concurrently, by the CapacityScheduler.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.capacity</name>
+ <value>100</value>
+ <description>Percentage of the number of slots in the cluster that are
+ to be available for jobs in this queue.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.maximum-capacity</name>
+ <value>-1</value>
+ <description>
+ maximum-capacity defines a limit beyond which a queue cannot use the capacity of the cluster.
+ This provides a means to limit how much excess capacity a queue can use. By default, there is no limit.
+ The maximum-capacity of a queue can only be greater than or equal to its minimum capacity.
+ Default value of -1 implies a queue can use complete capacity of the cluster.
+
+ This property could be to curtail certain jobs which are long running in nature from occupying more than a
+ certain percentage of the cluster, which in the absence of pre-emption, could lead to capacity guarantees of
+ other queues being affected.
+
+ One important thing to note is that maximum-capacity is a percentage , so based on the cluster's capacity
+ the max capacity would change. So if large no of nodes or racks get added to the cluster , max Capacity in
+ absolute terms would increase accordingly.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.supports-priority</name>
+ <value>false</value>
+ <description>If true, priorities of jobs will be taken into
+ account in scheduling decisions.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.minimum-user-limit-percent</name>
+ <value>100</value>
+ <description> Each queue enforces a limit on the percentage of resources
+ allocated to a user at any given time, if there is competition for them.
+ This user limit can vary between a minimum and maximum value. The former
+ depends on the number of users who have submitted jobs, and the latter is
+ set to this property value. For example, suppose the value of this
+ property is 25. If two users have submitted jobs to a queue, no single
+ user can use more than 50% of the queue resources. If a third user submits
+ a job, no single user can use more than 33% of the queue resources. With 4
+ or more users, no user can use more than 25% of the queue's resources. A
+ value of 100 implies no user limits are imposed.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.user-limit-factor</name>
+ <value>1</value>
+ <description>The multiple of the queue capacity which can be configured to
+ allow a single user to acquire more slots.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.maximum-initialized-active-tasks</name>
+ <value>200000</value>
+ <description>The maximum number of tasks, across all jobs in the queue,
+ which can be initialized concurrently. Once the queue's jobs exceed this
+ limit they will be queued on disk.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.maximum-initialized-active-tasks-per-user</name>
+ <value>100000</value>
+ <description>The maximum number of tasks per-user, across all the of the
+ user's jobs in the queue, which can be initialized concurrently. Once the
+ user's jobs exceed this limit they will be queued on disk.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.queue.default.init-accept-jobs-factor</name>
+ <value>10</value>
+ <description>The multipe of (maximum-system-jobs * queue-capacity) used to
+ determine the number of jobs which are accepted by the scheduler.
+ </description>
+ </property>
+
+ <!-- The default configuration settings for the capacity task scheduler -->
+ <!-- The default values would be applied to all the queues which don't have -->
+ <!-- the appropriate property for the particular queue -->
+ <property>
+ <name>mapred.capacity-scheduler.default-supports-priority</name>
+ <value>false</value>
+ <description>If true, priorities of jobs will be taken into
+ account in scheduling decisions by default in a job queue.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.default-minimum-user-limit-percent</name>
+ <value>100</value>
+ <description>The percentage of the resources limited to a particular user
+ for the job queue at any given point of time by default.
+ </description>
+ </property>
+
+
+ <property>
+ <name>mapred.capacity-scheduler.default-user-limit-factor</name>
+ <value>1</value>
+ <description>The default multiple of queue-capacity which is used to
+ determine the amount of slots a single user can consume concurrently.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.default-maximum-active-tasks-per-queue</name>
+ <value>200000</value>
+ <description>The default maximum number of tasks, across all jobs in the
+ queue, which can be initialized concurrently. Once the queue's jobs exceed
+ this limit they will be queued on disk.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.default-maximum-active-tasks-per-user</name>
+ <value>100000</value>
+ <description>The default maximum number of tasks per-user, across all the of
+ the user's jobs in the queue, which can be initialized concurrently. Once
+ the user's jobs exceed this limit they will be queued on disk.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.capacity-scheduler.default-init-accept-jobs-factor</name>
+ <value>10</value>
+ <description>The default multipe of (maximum-system-jobs * queue-capacity)
+ used to determine the number of jobs which are accepted by the scheduler.
+ </description>
+ </property>
+
+ <!-- Capacity scheduler Job Initialization configuration parameters -->
+ <property>
+ <name>mapred.capacity-scheduler.init-poll-interval</name>
+ <value>5000</value>
+ <description>The amount of time in miliseconds which is used to poll
+ the job queues for jobs to initialize.
+ </description>
+ </property>
+ <property>
+ <name>mapred.capacity-scheduler.init-worker-threads</name>
+ <value>5</value>
+ <description>Number of worker threads which would be used by
+ Initialization poller to initialize jobs in a set of queue.
+ If number mentioned in property is equal to number of job queues
+ then a single thread would initialize jobs in a queue. If lesser
+ then a thread would get a set of queues assigned. If the number
+ is greater then number of threads would be equal to number of
+ job queues.
+ </description>
+ </property>
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/core-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/core-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/core-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/core-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,20 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<configuration>
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-queue-acls.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-queue-acls.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-queue-acls.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-queue-acls.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,39 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- mapred-queue-acls.xml -->
+<configuration>
+
+
+<!-- queue default -->
+
+ <property>
+ <name>mapred.queue.default.acl-submit-job</name>
+ <value>*</value>
+ </property>
+
+ <property>
+ <name>mapred.queue.default.acl-administer-jobs</name>
+ <value>*</value>
+ </property>
+
+ <!-- END ACLs -->
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/configuration/mapred-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,531 @@
+<?xml version="1.0"?>
+<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- Put site-specific property overrides in this file. -->
+
+<configuration xmlns:xi="http://www.w3.org/2001/XInclude">
+
+<!-- i/o properties -->
+
+ <property>
+ <name>io.sort.mb</name>
+ <value></value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>io.sort.record.percent</name>
+ <value>.2</value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>io.sort.spill.percent</name>
+ <value></value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>io.sort.factor</name>
+ <value>100</value>
+ <description>No description</description>
+ </property>
+
+<!-- map/reduce properties -->
+
+<property>
+ <name>mapred.tasktracker.tasks.sleeptime-before-sigkill</name>
+ <value>250</value>
+ <description>Normally, this is the amount of time before killing
+ processes, and the recommended-default is 5.000 seconds - a value of
+ 5000 here. In this case, we are using it solely to blast tasks before
+ killing them, and killing them very quickly (1/4 second) to guarantee
+ that we do not leave VMs around for later jobs.
+ </description>
+</property>
+
+ <property>
+ <name>mapred.job.tracker.handler.count</name>
+ <value>50</value>
+ <description>
+ The number of server threads for the JobTracker. This should be roughly
+ 4% of the number of tasktracker nodes.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.system.dir</name>
+ <value></value>
+ <description>No description</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>mapred.job.tracker</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>No description</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>mapred.job.tracker.http.address</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>No description</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <!-- cluster specific -->
+ <name>mapred.local.dir</name>
+ <value></value>
+ <description>No description</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>mapreduce.cluster.administrators</name>
+ <value> hadoop</value>
+ </property>
+
+ <property>
+ <name>mapred.reduce.parallel.copies</name>
+ <value>30</value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>mapred.tasktracker.map.tasks.maximum</name>
+ <value></value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>mapred.tasktracker.reduce.tasks.maximum</name>
+ <value></value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>tasktracker.http.threads</name>
+ <value>50</value>
+ </property>
+
+ <property>
+ <name>mapred.map.tasks.speculative.execution</name>
+ <value>false</value>
+ <description>If true, then multiple instances of some map tasks
+ may be executed in parallel.</description>
+ </property>
+
+ <property>
+ <name>mapred.reduce.tasks.speculative.execution</name>
+ <value>false</value>
+ <description>If true, then multiple instances of some reduce tasks
+ may be executed in parallel.</description>
+ </property>
+
+ <property>
+ <name>mapred.reduce.slowstart.completed.maps</name>
+ <value>0.05</value>
+ </property>
+
+ <property>
+ <name>mapred.inmem.merge.threshold</name>
+ <value>1000</value>
+ <description>The threshold, in terms of the number of files
+ for the in-memory merge process. When we accumulate threshold number of files
+ we initiate the in-memory merge and spill to disk. A value of 0 or less than
+ 0 indicates we want to DON'T have any threshold and instead depend only on
+ the ramfs's memory consumption to trigger the merge.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.job.shuffle.merge.percent</name>
+ <value>0.66</value>
+ <description>The usage threshold at which an in-memory merge will be
+ initiated, expressed as a percentage of the total memory allocated to
+ storing in-memory map outputs, as defined by
+ mapred.job.shuffle.input.buffer.percent.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.job.shuffle.input.buffer.percent</name>
+ <value>0.7</value>
+ <description>The percentage of memory to be allocated from the maximum heap
+ size to storing map outputs during the shuffle.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.map.output.compression.codec</name>
+ <value></value>
+ <description>If the map outputs are compressed, how should they be
+ compressed
+ </description>
+ </property>
+
+<property>
+ <name>mapred.output.compression.type</name>
+ <value>BLOCK</value>
+ <description>If the job outputs are to compressed as SequenceFiles, how should
+ they be compressed? Should be one of NONE, RECORD or BLOCK.
+ </description>
+</property>
+
+
+ <property>
+ <name>mapred.jobtracker.completeuserjobs.maximum</name>
+ <value>0</value>
+ </property>
+
+ <property>
+ <name>mapred.jobtracker.taskScheduler</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.jobtracker.restart.recover</name>
+ <value>false</value>
+ <description>"true" to enable (job) recovery upon restart,
+ "false" to start afresh
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.job.reduce.input.buffer.percent</name>
+ <value>0.0</value>
+ <description>The percentage of memory- relative to the maximum heap size- to
+ retain map outputs during the reduce. When the shuffle is concluded, any
+ remaining map outputs in memory must consume less than this threshold before
+ the reduce can begin.
+ </description>
+ </property>
+
+ <property>
+ <name>mapreduce.reduce.input.limit</name>
+ <value>10737418240</value>
+ <description>The limit on the input size of the reduce. (This value
+ is 10 Gb.) If the estimated input size of the reduce is greater than
+ this value, job is failed. A value of -1 means that there is no limit
+ set. </description>
+</property>
+
+
+ <!-- copied from kryptonite configuration -->
+ <property>
+ <name>mapred.compress.map.output</name>
+ <value></value>
+ </property>
+
+
+ <property>
+ <name>mapred.task.timeout</name>
+ <value>600000</value>
+ <description>The number of milliseconds before a task will be
+ terminated if it neither reads an input, writes an output, nor
+ updates its status string.
+ </description>
+ </property>
+
+ <property>
+ <name>jetty.connector</name>
+ <value>org.mortbay.jetty.nio.SelectChannelConnector</value>
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>mapred.task.tracker.task-controller</name>
+ <value></value>
+ <description>
+ TaskController which is used to launch and manage task execution.
+ </description>
+ </property>
+
+ <property>
+ <name>mapred.child.root.logger</name>
+ <value>INFO,TLA</value>
+ </property>
+
+ <property>
+ <name>mapred.child.java.opts</name>
+ <value></value>
+
+ <description>No description</description>
+ </property>
+
+ <property>
+ <name>mapred.cluster.map.memory.mb</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.cluster.reduce.memory.mb</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.job.map.memory.mb</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.job.reduce.memory.mb</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.cluster.max.map.memory.mb</name>
+ <value></value>
+ </property>
+
+ <property>
+ <name>mapred.cluster.max.reduce.memory.mb</name>
+ <value></value>
+ </property>
+
+<property>
+ <name>mapred.hosts</name>
+ <value></value>
+</property>
+
+<property>
+ <name>mapred.hosts.exclude</name>
+ <value></value>
+</property>
+
+<property>
+ <name>mapred.max.tracker.blacklists</name>
+ <value>16</value>
+ <description>
+ if node is reported blacklisted by 16 successful jobs within timeout-window, it will be graylisted
+ </description>
+</property>
+
+<property>
+ <name>mapred.healthChecker.script.path</name>
+ <value></value>
+</property>
+
+<property>
+ <name>mapred.healthChecker.interval</name>
+ <value>135000</value>
+</property>
+
+<property>
+ <name>mapred.healthChecker.script.timeout</name>
+ <value>60000</value>
+</property>
+
+<property>
+ <name>mapred.job.tracker.persist.jobstatus.active</name>
+ <value>false</value>
+ <description>Indicates if persistency of job status information is
+ active or not.
+ </description>
+</property>
+
+<property>
+ <name>mapred.job.tracker.persist.jobstatus.hours</name>
+ <value>1</value>
+ <description>The number of hours job status information is persisted in DFS.
+ The job status information will be available after it drops of the memory
+ queue and between jobtracker restarts. With a zero value the job status
+ information is not persisted at all in DFS.
+ </description>
+</property>
+
+<property>
+ <name>mapred.job.tracker.persist.jobstatus.dir</name>
+ <value></value>
+ <description>The directory where the job status information is persisted
+ in a file system to be available after it drops of the memory queue and
+ between jobtracker restarts.
+ </description>
+</property>
+
+<property>
+ <name>mapred.jobtracker.retirejob.check</name>
+ <value>10000</value>
+</property>
+
+<property>
+ <name>mapred.jobtracker.retirejob.interval</name>
+ <value>0</value>
+</property>
+
+<property>
+ <name>mapred.job.tracker.history.completed.location</name>
+ <value>/mapred/history/done</value>
+ <description>No description</description>
+</property>
+
+<property>
+ <name>mapred.task.maxvmem</name>
+ <value></value>
+ <final>true</final>
+ <description>No description</description>
+</property>
+
+<property>
+ <name>mapred.jobtracker.maxtasks.per.job</name>
+ <value></value>
+ <final>true</final>
+ <description>The maximum number of tasks for a single job.
+ A value of -1 indicates that there is no maximum. </description>
+</property>
+
+<property>
+ <name>mapreduce.fileoutputcommitter.marksuccessfuljobs</name>
+ <value>false</value>
+</property>
+
+<property>
+ <name>mapred.userlog.retain.hours</name>
+ <value></value>
+</property>
+
+<property>
+ <name>mapred.job.reuse.jvm.num.tasks</name>
+ <value>1</value>
+ <description>
+ How many tasks to run per jvm. If set to -1, there is no limit
+ </description>
+ <final>true</final>
+</property>
+
+<property>
+ <name>mapreduce.jobtracker.kerberos.principal</name>
+ <value></value>
+ <description>
+ JT user name key.
+ </description>
+</property>
+
+<property>
+ <name>mapreduce.tasktracker.kerberos.principal</name>
+ <value></value>
+ <description>
+ tt user name key. "_HOST" is replaced by the host name of the task tracker.
+ </description>
+</property>
+
+
+ <property>
+ <name>hadoop.job.history.user.location</name>
+ <value>none</value>
+ <final>true</final>
+ </property>
+
+
+ <property>
+ <name>mapreduce.jobtracker.keytab.file</name>
+ <value></value>
+ <description>
+ The keytab for the jobtracker principal.
+ </description>
+
+</property>
+
+ <property>
+ <name>mapreduce.tasktracker.keytab.file</name>
+ <value></value>
+ <description>The filename of the keytab for the task tracker</description>
+ </property>
+
+ <property>
+ <name>mapreduce.jobtracker.staging.root.dir</name>
+ <value>/user</value>
+ <description>The Path prefix for where the staging directories should be placed. The next level is always the user's
+ name. It is a path in the default file system.</description>
+ </property>
+
+ <property>
+ <name>mapreduce.tasktracker.group</name>
+ <value>hadoop</value>
+ <description>The group that the task controller uses for accessing the task controller. The mapred user must be a member and users should *not* be members.</description>
+
+ </property>
+
+ <property>
+ <name>mapreduce.jobtracker.split.metainfo.maxsize</name>
+ <value>50000000</value>
+ <final>true</final>
+ <description>If the size of the split metainfo file is larger than this, the JobTracker will fail the job during
+ initialize.
+ </description>
+ </property>
+ <property>
+ <name>mapreduce.history.server.embedded</name>
+ <value>false</value>
+ <description>Should job history server be embedded within Job tracker
+process</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>mapreduce.history.server.http.address</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>Http address of the history server</description>
+ <final>true</final>
+ </property>
+
+ <property>
+ <name>mapreduce.jobhistory.kerberos.principal</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>Job history user name key. (must map to same user as JT
+user)</description>
+ </property>
+
+ <property>
+ <name>mapreduce.jobhistory.keytab.file</name>
+ <!-- cluster variant -->
+ <value></value>
+ <description>The keytab for the job history server principal.</description>
+ </property>
+
+<property>
+ <name>mapred.jobtracker.blacklist.fault-timeout-window</name>
+ <value>180</value>
+ <description>
+ 3-hour sliding window (value is in minutes)
+ </description>
+</property>
+
+<property>
+ <name>mapred.jobtracker.blacklist.fault-bucket-width</name>
+ <value>15</value>
+ <description>
+ 15-minute bucket size (value is in minutes)
+ </description>
+</property>
+
+<property>
+ <name>mapred.queue.names</name>
+ <value>default</value>
+ <description> Comma separated list of queues configured for this jobtracker.</description>
+</property>
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/MAPREDUCE/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,41 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>mapred</user>
+ <comment>Apache Hadoop Distributed Processing Framework</comment>
+ <version>1.1.2</version>
+
+ <components>
+ <component>
+ <name>JOBTRACKER</name>
+ <category>MASTER</category>
+ </component>
+
+ <component>
+ <name>TASKTRACKER</name>
+ <category>SLAVE</category>
+ </component>
+
+ <component>
+ <name>MAPREDUCE_CLIENT</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/NAGIOS/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/NAGIOS/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/NAGIOS/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/NAGIOS/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,30 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>Nagios Monitoring and Alerting system</comment>
+ <version>3.2.3</version>
+
+ <components>
+ <component>
+ <name>NAGIOS_SERVER</name>
+ <category>MASTER</category>
+ </component>
+ </components>
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/configuration/oozie-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/configuration/oozie-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/configuration/oozie-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/configuration/oozie-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,245 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one
+ or more contributor license agreements. See the NOTICE file
+ distributed with this work for additional information
+ regarding copyright ownership. The ASF licenses this file
+ to you under the Apache License, Version 2.0 (the
+ "License"); you may not use this file except in compliance
+ with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<configuration>
+
+<!--
+ Refer to the oozie-default.xml file for the complete list of
+ Oozie configuration properties and their default values.
+-->
+ <property>
+ <name>oozie.base.url</name>
+ <value>http://localhost:11000/oozie</value>
+ <description>Base Oozie URL.</description>
+ </property>
+
+ <property>
+ <name>oozie.system.id</name>
+ <value>oozie-${user.name}</value>
+ <description>
+ The Oozie system ID.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.systemmode</name>
+ <value>NORMAL</value>
+ <description>
+ System mode for Oozie at startup.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.AuthorizationService.security.enabled</name>
+ <value>true</value>
+ <description>
+ Specifies whether security (user name/admin role) is enabled or not.
+ If disabled any user can manage Oozie system and manage any job.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.PurgeService.older.than</name>
+ <value>30</value>
+ <description>
+ Jobs older than this value, in days, will be purged by the PurgeService.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.PurgeService.purge.interval</name>
+ <value>3600</value>
+ <description>
+ Interval at which the purge service will run, in seconds.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.CallableQueueService.queue.size</name>
+ <value>1000</value>
+ <description>Max callable queue size</description>
+ </property>
+
+ <property>
+ <name>oozie.service.CallableQueueService.threads</name>
+ <value>10</value>
+ <description>Number of threads used for executing callables</description>
+ </property>
+
+ <property>
+ <name>oozie.service.CallableQueueService.callable.concurrency</name>
+ <value>3</value>
+ <description>
+ Maximum concurrency for a given callable type.
+ Each command is a callable type (submit, start, run, signal, job, jobs, suspend,resume, etc).
+ Each action type is a callable type (Map-Reduce, Pig, SSH, FS, sub-workflow, etc).
+ All commands that use action executors (action-start, action-end, action-kill and action-check) use
+ the action type as the callable type.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.coord.normal.default.timeout</name>
+ <value>120</value>
+ <description>Default timeout for a coordinator action input check (in minutes) for normal job.
+ -1 means infinite timeout</description>
+ </property>
+
+ <property>
+ <name>oozie.db.schema.name</name>
+ <value>oozie</value>
+ <description>
+ Oozie DataBase Name
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.HadoopAccessorService.jobTracker.whitelist</name>
+ <value> </value>
+ <description>
+ Whitelisted job tracker for Oozie service.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.authentication.type</name>
+ <value>simple</value>
+ <description>
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.HadoopAccessorService.nameNode.whitelist</name>
+ <value> </value>
+ <description>
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.WorkflowAppService.system.libpath</name>
+ <value>/user/${user.name}/share/lib</value>
+ <description>
+ System library path to use for workflow applications.
+ This path is added to workflow application if their job properties sets
+ the property 'oozie.use.system.libpath' to true.
+ </description>
+ </property>
+
+ <property>
+ <name>use.system.libpath.for.mapreduce.and.pig.jobs</name>
+ <value>false</value>
+ <description>
+ If set to true, submissions of MapReduce and Pig jobs will include
+ automatically the system library path, thus not requiring users to
+ specify where the Pig JAR files are. Instead, the ones from the system
+ library path are used.
+ </description>
+ </property>
+ <property>
+ <name>oozie.authentication.kerberos.name.rules</name>
+ <value>
+ RULE:[2:$1@$0]([jt]t@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-MAPREDUSER/
+ RULE:[2:$1@$0]([nd]n@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HDFSUSER/
+ RULE:[2:$1@$0](hm@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HBASE-USER/
+ RULE:[2:$1@$0](rs@.*TODO-KERBEROS-DOMAIN)s/.*/TODO-HBASE-USER/
+ DEFAULT
+ </value>
+ <description>The mapping from kerberos principal names to local OS user names.</description>
+ </property>
+ <property>
+ <name>oozie.service.HadoopAccessorService.hadoop.configurations</name>
+ <value>*=/etc/hadoop/conf</value>
+ <description>
+ Comma separated AUTHORITY=HADOOP_CONF_DIR, where AUTHORITY is the HOST:PORT of
+ the Hadoop service (JobTracker, HDFS). The wildcard '*' configuration is
+ used when there is no exact match for an authority. The HADOOP_CONF_DIR contains
+ the relevant Hadoop *-site.xml files. If the path is relative is looked within
+ the Oozie configuration directory; though the path can be absolute (i.e. to point
+ to Hadoop client conf/ directories in the local filesystem.
+ </description>
+ </property>
+ <property>
+ <name>oozie.service.ActionService.executor.ext.classes</name>
+ <value>
+ org.apache.oozie.action.email.EmailActionExecutor,
+ org.apache.oozie.action.hadoop.HiveActionExecutor,
+ org.apache.oozie.action.hadoop.ShellActionExecutor,
+ org.apache.oozie.action.hadoop.SqoopActionExecutor,
+ org.apache.oozie.action.hadoop.DistcpActionExecutor
+ </value>
+ </property>
+
+ <property>
+ <name>oozie.service.SchemaService.wf.ext.schemas</name>
+ <value>shell-action-0.1.xsd,email-action-0.1.xsd,hive-action-0.2.xsd,sqoop-action-0.2.xsd,ssh-action-0.1.xsd,distcp-action-0.1.xsd</value>
+ </property>
+ <property>
+ <name>oozie.service.JPAService.create.db.schema</name>
+ <value>false</value>
+ <description>
+ Creates Oozie DB.
+
+ If set to true, it creates the DB schema if it does not exist. If the DB schema exists is a NOP.
+ If set to false, it does not create the DB schema. If the DB schema does not exist it fails start up.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.JPAService.jdbc.driver</name>
+ <value>org.apache.derby.jdbc.EmbeddedDriver</value>
+ <description>
+ JDBC driver class.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.JPAService.jdbc.url</name>
+ <value>jdbc:derby:${oozie.data.dir}/${oozie.db.schema.name}-db;create=true</value>
+ <description>
+ JDBC URL.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.JPAService.jdbc.username</name>
+ <value>sa</value>
+ <description>
+ DB user name.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.JPAService.jdbc.password</name>
+ <value> </value>
+ <description>
+ DB user password.
+
+ IMPORTANT: if password is emtpy leave a 1 space string, the service trims the value,
+ if empty Configuration assumes it is NULL.
+ </description>
+ </property>
+
+ <property>
+ <name>oozie.service.JPAService.pool.max.active.conn</name>
+ <value>10</value>
+ <description>
+ Max number of connections.
+ </description>
+ </property>
+</configuration>
\ No newline at end of file
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/OOZIE/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,35 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>System for workflow coordination and execution of Apache Hadoop jobs</comment>
+ <version>3.2.0</version>
+
+ <components>
+ <component>
+ <name>OOZIE_SERVER</name>
+ <category>MASTER</category>
+ </component>
+
+ <component>
+ <name>OOZIE_CLIENT</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/configuration/pig.properties
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/configuration/pig.properties?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/configuration/pig.properties (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/configuration/pig.properties Fri Feb 15 22:59:54 2013
@@ -0,0 +1,52 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Pig default configuration file. All values can be overwritten by pig.properties and command line arguments.
+# see bin/pig -help
+
+# brief logging (no timestamps)
+brief=false
+
+#debug level, INFO is default
+debug=INFO
+
+#verbose print all log messages to screen (default to print only INFO and above to screen)
+verbose=false
+
+#exectype local|mapreduce, mapreduce is default
+exectype=mapreduce
+
+#Enable insertion of information about script into hadoop job conf
+pig.script.info.enabled=true
+
+#Do not spill temp files smaller than this size (bytes)
+pig.spill.size.threshold=5000000
+#EXPERIMENT: Activate garbage collection when spilling a file bigger than this size (bytes)
+#This should help reduce the number of files being spilled.
+pig.spill.gc.activation.size=40000000
+
+#the following two parameters are to help estimate the reducer number
+pig.exec.reducers.bytes.per.reducer=1000000000
+pig.exec.reducers.max=999
+
+#Temporary location to store the intermediate data.
+pig.temp.dir=/tmp/
+
+#Threshold for merging FRJoin fragment files
+pig.files.concatenation.threshold=100
+pig.optimistic.files.concatenation=false;
+
+pig.disable.counter=false
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/PIG/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,30 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>Scripting platform for analyzing large datasets</comment>
+ <version>0.10.1</version>
+
+ <components>
+ <component>
+ <name>PIG</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/SQOOP/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/SQOOP/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/SQOOP/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/SQOOP/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,30 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>Tool for transferring bulk data between Apache Hadoop and structured data stores such as relational databases</comment>
+ <version>1.4.2</version>
+
+ <components>
+ <component>
+ <name>SQOOP</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/configuration/webhcat-site.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/configuration/webhcat-site.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/configuration/webhcat-site.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/configuration/webhcat-site.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+<!-- The default settings for Templeton. -->
+<!-- Edit templeton-site.xml to change settings for your local -->
+<!-- install. -->
+
+<configuration>
+
+ <property>
+ <name>templeton.port</name>
+ <value>50111</value>
+ <description>The HTTP port for the main server.</description>
+ </property>
+
+ <property>
+ <name>templeton.hadoop.conf.dir</name>
+ <value>/etc/hadoop/conf</value>
+ <description>The path to the Hadoop configuration.</description>
+ </property>
+
+ <property>
+ <name>templeton.jar</name>
+ <value>/usr/lib/hcatalog/share/webhcat/svr/webhcat.jar</value>
+ <description>The path to the Templeton jar file.</description>
+ </property>
+
+ <property>
+ <name>templeton.libjars</name>
+ <value>/usr/lib/zookeeper/zookeeper.jar</value>
+ <description>Jars to add the the classpath.</description>
+ </property>
+
+
+ <property>
+ <name>templeton.hadoop</name>
+ <value>/usr/bin/hadoop</value>
+ <description>The path to the Hadoop executable.</description>
+ </property>
+
+ <property>
+ <name>templeton.pig.archive</name>
+ <value>hdfs:///apps/webhcat/pig.tar.gz</value>
+ <description>The path to the Pig archive.</description>
+ </property>
+
+ <property>
+ <name>templeton.pig.path</name>
+ <value>pig.tar.gz/pig/bin/pig</value>
+ <description>The path to the Pig executable.</description>
+ </property>
+
+ <property>
+ <name>templeton.hcat</name>
+ <value>/usr/bin/hcat</value>
+ <description>The path to the hcatalog executable.</description>
+ </property>
+
+ <property>
+ <name>templeton.hive.archive</name>
+ <value>hdfs:///apps/webhcat/hive.tar.gz</value>
+ <description>The path to the Hive archive.</description>
+ </property>
+
+ <property>
+ <name>templeton.hive.path</name>
+ <value>hive.tar.gz/hive/bin/hive</value>
+ <description>The path to the Hive executable.</description>
+ </property>
+
+ <property>
+ <name>templeton.hive.properties</name>
+ <value></value>
+ <description>Properties to set when running hive.</description>
+ </property>
+
+
+ <property>
+ <name>templeton.zookeeper.hosts</name>
+ <value></value>
+ <description>ZooKeeper servers, as comma separated host:port pairs</description>
+ </property>
+
+ <property>
+ <name>templeton.storage.class</name>
+ <value>org.apache.hcatalog.templeton.tool.ZooKeeperStorage</value>
+ <description>The class to use as storage</description>
+ </property>
+
+ <property>
+ <name>templeton.override.enabled</name>
+ <value>false</value>
+ <description>
+ Enable the override path in templeton.override.jars
+ </description>
+ </property>
+
+ <property>
+ <name>templeton.streaming.jar</name>
+ <value>hdfs:///apps/webhcat/hadoop-streaming.jar</value>
+ <description>The hdfs path to the Hadoop streaming jar file.</description>
+ </property>
+
+ <property>
+ <name>templeton.exec.timeout</name>
+ <value>60000</value>
+ <description>Time out for templeton api</description>
+ </property>
+
+</configuration>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/WEBHCAT/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,31 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>This is comment for WEBHCAT service</comment>
+ <version>0.5.0</version>
+
+ <components>
+ <component>
+ <name>WEBHCAT_SERVER</name>
+ <category>MASTER</category>
+ </component>
+ </components>
+
+
+</metainfo>
Added: incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/ZOOKEEPER/metainfo.xml
URL: http://svn.apache.org/viewvc/incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/ZOOKEEPER/metainfo.xml?rev=1446803&view=auto
==============================================================================
--- incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/ZOOKEEPER/metainfo.xml (added)
+++ incubator/ambari/trunk/ambari-server/src/main/resources/stacks/HDPLocal/1.2.2/services/ZOOKEEPER/metainfo.xml Fri Feb 15 22:59:54 2013
@@ -0,0 +1,35 @@
+<?xml version="1.0"?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metainfo>
+ <user>root</user>
+ <comment>This is comment for ZOOKEEPER service</comment>
+ <version>3.4.5</version>
+
+ <components>
+ <component>
+ <name>ZOOKEEPER_SERVER</name>
+ <category>MASTER</category>
+ </component>
+
+ <component>
+ <name>ZOOKEEPER_CLIENT</name>
+ <category>CLIENT</category>
+ </component>
+ </components>
+
+</metainfo>