You are viewing a plain text version of this content. The canonical link for it is here.
Posted to asp@perl.apache.org by sangeethvs <sa...@masconit.com> on 2005/05/18 13:28:38 UTC
Application Variable not getting created
Hi,
I'm trying to move an existing application in Perl and Postgres
to a
new server with Oracle as database. I have installed the necessary
modules (I think so) but I'm getting errors while running the
application. The programming is done in object oriented Perl and
unfortunately I have no experience in object oriented Perl.
But what I have come to understand is that, when the application
starts an application variable is created and further actions in the
applications are based on the value in this variable. It looks like
that this application variable is not getting created and this is
causing the errors I'm facing. I also verified it by printing
the
contents of the application variable. Nothing gets printed.
The contents of global.asa file are given below.
==================================================
use lib ".";
use lib "/usr/local/lib/perl5/site_perl/5.8.6";
use Checklist::Users;
sub Script_OnStart {
use lib "./lib";
}
sub Session_OnStart {
# THIS IS FOR THE GRAPH STUFF
my $ID = $Session->{SessionID};
my $DIR = "/usr/local/apache/htdocs/images/graphs";
system("mkdir $DIR/$ID");
$Session->{WriteGraphDir} = "$DIR";
$Session->{SRCGraphDir} = "/images/graphs";
&Application_OnStart();
}
sub Session_OnEnd {
# THIS IS FOR THE GRAPH STUFF
my $ID = $Session->{SessionID};
system ("rm -rf /usr/local/apache/htdocs/images/graphs/$ID") if
($ID);
}
sub Application_OnStart {
# Load up the users
my $users = new Checklist::Users();
$Application->{'ChecklistWeb::UsersObj'} = $users;
}
sub Application_OnEnd {
$Application->{'ChecklistWeb::UsersObj'} = undef;
}
==================================================
The configuration section of httpd.conf is given below
=============================================================
<Files ~ (\.asp)>
AllowOverride All
Allow from all
SetHandler perl-script
PerlModule Apache::DBI
PerlHandler Apache::ASP
PerlSetVar SessionTimeout 120
PerlSetVar StateManager 60
PerlSetVar StateDB DB_File
PerlSetVar Global /usr/local/apache/htdocs
PerlSetVar StateDir /tmp/WebData
PerlSetVar Debug 2
</Files>
PerlSetVar Global .
PerlSetVar GlobalPackage Apache::ASP::Demo
PerlSetVar StateDir /tmp/asp
PerlSetVar StatINC 0
PerlSetVar StatINCMatch 0
PerlSetVar Clean 0
PerlSetVar DynamicIncludes 1
PerlSetVar FileUploadMax 500000
PerlSetVar FileUploadTemp 1
PerlSetVar SessionQueryParse 0
PerlSetVar SessionQuery 1
PerlSetVar Debug -3
PerlSetVar StateCache 0
PerlSetVar SessionCount 1
PerlSetVar TimeHiRes 1
PerlSetVar CompressGzip 0
PerlSetVar UseStrict 1
=============================================================
Following are the Perl modules that I have installed
· CGI
· DBI
· DBD::Oracle
· Bundle::Apache::ASP
· Apache::DBI
· DB_File
· GD (2.23)
· GD::Text
· GD::Graph
· FreezeThaw
The output of perl V is
=================================================================
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=solaris, osvers=2.8, archname=sun4-solaris
uname='sunos parker 5.8 generic_117350-07 sun4u sparc sunw,ultra-
4 '
config_args='-de'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef
usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-fno-strict-aliasing -pipe -
I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.2', gccosandvers='solaris2.8'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define,
longdblsize=16
ivtype='long', ivsize=4, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: USE_LARGE_FILES
Built under solaris
Compiled at Mar 21 2005 23:54:20
@INC:
/usr/local/lib/perl5/5.8.6/sun4-solaris
/usr/local/lib/perl5/5.8.6
/usr/local/lib/perl5/site_perl/5.8.6/sun4-solaris
/usr/local/lib/perl5/site_perl/5.8.6
/usr/local/lib/perl5/site_perl
.
==================================================================
Could anyone please let me know what could be the problem? Please
let me know if you need any further information from me.
I also notice another problem with .asp files. When I run an .asp
file for the first time in a new browser, I get the following error.
=================================================
Errors Output
, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
Debug Output
, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
=====================================================
But when I reload the application, I don't receive this error.
Any
thoughts on this?
Thanks in advance,
Sangeeth
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Application Variable not getting created
Posted by Sangeeth V S <sa...@masconit.com>.
Hi,
Thanks very much for trying to help me out! I really appreciate it.
> - is global.asa really been executed? Test it with a "print" or "die" in
it
>
> - if ok, try to add a "Script_OnStart" Handler, that calls
> Session_OnStart() to enshure,
> that it is called at each page reload..
I think global.asa is being executed. Few session variables are being
created in Session_OnStart. I printed the session variables and these are
being created. Isn't that enough to confirm that global.asa is getting
executed?
> Question: In your httpd.conf you set several Perl Variables twice - e.g.
> Global -
> Is there a special reason for you to do this outside of the "<Files ~
> (\.asp)>" - scope ?
>
> If not, "unify" theese entries an place it inside the <Files > scope.
I really didn't know why it was set like that. I am migrating this
application to a new server. So I just copied the exact settings in the
current server to the new server. I was also very confused in seeing these
settings. But there's no documentation for this application and no one to
ask regarding this.
Thanks,
Sangeeth
----- Original Message -----
From: "Helmut Zeilinger" <hz...@hzlabs.de>
To: "Sangeeth V S" <Sa...@masconit.com>
Cc: <as...@perl.apache.org>
Sent: Monday, May 23, 2005 1:57 PM
Subject: Re: Application Variable not getting created
> Hi,
>
> that's is what one was expecting.. good ..
>
> The next things i would do:
>
> - is global.asa really been executed? Test it with a "print" or "die" in
it
>
> - if ok, try to add a "Script_OnStart" Handler, that calls
> Session_OnStart() to enshure,
> that it is called at each page reload..
>
> Question: In your httpd.conf you set several Perl Variables twice - e.g.
> Global -
> Is there a special reason for you to do this outside of the "<Files ~
> (\.asp)>" - scope ?
>
> If not, "unify" theese entries an place it inside the <Files > scope.
>
> Helmut
>
> >When I try this I get the value 'Checklist::Users'. Following is the
script
> >I ran.
> >
> ><%
> >use Checklist::Users;
> >
> >my $users = new Checklist::Users();
> >$Application->{'ChecklistWeb::UsersObj'} = $users;
> >print ref ($Application->{'ChecklistWeb::UsersObj'});
> >$Application->{'ChecklistWeb::UsersObj'} = undef;
> >%>
> >
> >
> >Thanks,
> >Sangeeth
> >
> >
> >
> >----- Original Message -----
> >From: "Helmut Zeilinger" <hz...@hzlabs.de>
> >To: "sangeethvs" <sa...@masconit.com>
> >Cc: <as...@perl.apache.org>
> >Sent: Monday, May 23, 2005 11:49 AM
> >Subject: Re: Application Variable not getting created
> >
> >
> >
> >
> >>Hi sangeethvs,
> >>
> >>just to make things less complicated - does it work when
> >>you call
> >>
> >>...
> >>
> >>$Application->{'ChecklistWeb::UsersObj'} = $users;
> >>print ref ($Application->{'ChecklistWeb::UsersObj'});
> >>$Application->{'ChecklistWeb::UsersObj'} = undef;
> >>...
> >>
> >>in ONE test (asp) script?
> >>
> >>Helmut
> >>
> >>
> >>
> >>
> >>
> >>
> >>>I'm trying to move an existing application in Perl and Postgres
> >>>to a
> >>>new server with Oracle as database. I have installed the necessary
> >>>modules (I think so) but I'm getting errors while running the
> >>>application. The programming is done in object oriented Perl and
> >>>unfortunately I have no experience in object oriented Perl.
> >>>
> >>>But what I have come to understand is that, when the application
> >>>starts an application variable is created and further actions in the
> >>>applications are based on the value in this variable. It looks like
> >>>that this application variable is not getting created and this is
> >>>causing the errors I'm facing. I also verified it by printing
> >>>the
> >>>contents of the application variable. Nothing gets printed.
> >>>
> >>>The contents of global.asa file are given below.
> >>>
> >>>==================================================
> >>>use lib ".";
> >>>use lib "/usr/local/lib/perl5/site_perl/5.8.6";
> >>>
> >>>use Checklist::Users;
> >>>
> >>>sub Script_OnStart {
> >>> use lib "./lib";
> >>>}
> >>>
> >>>sub Session_OnStart {
> >>> # THIS IS FOR THE GRAPH STUFF
> >>> my $ID = $Session->{SessionID};
> >>> my $DIR = "/usr/local/apache/htdocs/images/graphs";
> >>> system("mkdir $DIR/$ID");
> >>> $Session->{WriteGraphDir} = "$DIR";
> >>> $Session->{SRCGraphDir} = "/images/graphs";
> >>> &Application_OnStart();
> >>>}
> >>>
> >>>sub Session_OnEnd {
> >>> # THIS IS FOR THE GRAPH STUFF
> >>> my $ID = $Session->{SessionID};
> >>> system ("rm -rf /usr/local/apache/htdocs/images/graphs/$ID") if
> >>>($ID);
> >>>}
> >>>
> >>>sub Application_OnStart {
> >>> # Load up the users
> >>> my $users = new Checklist::Users();
> >>> $Application->{'ChecklistWeb::UsersObj'} = $users;
> >>>}
> >>>
> >>>sub Application_OnEnd {
> >>> $Application->{'ChecklistWeb::UsersObj'} = undef;
> >>>}
> >>>
> >>>==================================================
> >>>
> >>>The configuration section of httpd.conf is given below
> >>>
> >>>=============================================================
> >>><Files ~ (\.asp)>
> >>> AllowOverride All
> >>> Allow from all
> >>> SetHandler perl-script
> >>> PerlModule Apache::DBI
> >>> PerlHandler Apache::ASP
> >>> PerlSetVar SessionTimeout 120
> >>> PerlSetVar StateManager 60
> >>> PerlSetVar StateDB DB_File
> >>> PerlSetVar Global /usr/local/apache/htdocs
> >>> PerlSetVar StateDir /tmp/WebData
> >>> PerlSetVar Debug 2
> >>></Files>
> >>>
> >>>PerlSetVar Global .
> >>>PerlSetVar GlobalPackage Apache::ASP::Demo
> >>>PerlSetVar StateDir /tmp/asp
> >>>PerlSetVar StatINC 0
> >>>PerlSetVar StatINCMatch 0
> >>>PerlSetVar Clean 0
> >>>PerlSetVar DynamicIncludes 1
> >>>PerlSetVar FileUploadMax 500000
> >>>PerlSetVar FileUploadTemp 1
> >>>PerlSetVar SessionQueryParse 0
> >>>PerlSetVar SessionQuery 1
> >>>PerlSetVar Debug -3
> >>>PerlSetVar StateCache 0
> >>>PerlSetVar SessionCount 1
> >>>PerlSetVar TimeHiRes 1
> >>>PerlSetVar CompressGzip 0
> >>>PerlSetVar UseStrict 1
> >>>=============================================================
> >>>
> >>>Following are the Perl modules that I have installed
> >>>· CGI
> >>>· DBI
> >>>· DBD::Oracle
> >>>· Bundle::Apache::ASP
> >>>· Apache::DBI
> >>>· DB_File
> >>>· GD (2.23)
> >>>· GD::Text
> >>>· GD::Graph
> >>>· FreezeThaw
> >>>
> >>>The output of perl –V is
> >>>=================================================================
> >>>Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
> >>> Platform:
> >>> osname=solaris, osvers=2.8, archname=sun4-solaris
> >>> uname='sunos parker 5.8 generic_117350-07 sun4u sparc sunw,ultra-
> >>>4 '
> >>> config_args='-de'
> >>> hint=recommended, useposix=true, d_sigaction=define
> >>> usethreads=undef use5005threads=undef useithreads=undef
> >>>usemultiplicity=undef
> >>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> >>> use64bitint=undef use64bitall=undef uselongdouble=undef
> >>> usemymalloc=n, bincompat5005=undef
> >>> Compiler:
> >>> cc='gcc', ccflags ='-fno-strict-aliasing -pipe -
> >>>I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
> >>> optimize='-O',
> >>> cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
> >>> ccversion='', gccversion='3.3.2', gccosandvers='solaris2.8'
> >>> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
> >>> d_longlong=define, longlongsize=8, d_longdbl=define,
> >>>longdblsize=16
> >>> ivtype='long', ivsize=4, nvtype='double', nvsize=8,
> >>>Off_t='off_t', lseeksize=8
> >>> alignbytes=8, prototype=define
> >>> Linker and Libraries:
> >>> ld='gcc', ldflags =' -L/usr/local/lib '
> >>> libpth=/usr/local/lib /usr/lib /usr/ccs/lib
> >>> libs=-lsocket -lnsl -ldl -lm -lc
> >>> perllibs=-lsocket -lnsl -ldl -lm -lc
> >>> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> >>> gnulibc_version=''
> >>> Dynamic Linking:
> >>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
> >>> cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
> >>>
> >>>
> >>>Characteristics of this binary (from libperl):
> >>> Compile-time options: USE_LARGE_FILES
> >>> Built under solaris
> >>> Compiled at Mar 21 2005 23:54:20
> >>> @INC:
> >>> /usr/local/lib/perl5/5.8.6/sun4-solaris
> >>> /usr/local/lib/perl5/5.8.6
> >>> /usr/local/lib/perl5/site_perl/5.8.6/sun4-solaris
> >>> /usr/local/lib/perl5/site_perl/5.8.6
> >>> /usr/local/lib/perl5/site_perl
> >>> .
> >>>==================================================================
> >>>
> >>>Could anyone please let me know what could be the problem? Please
> >>>let me know if you need any further information from me.
> >>>
> >>>I also notice another problem with .asp files. When I run an .asp
> >>>file for the first time in a new browser, I get the following error.
> >>>
> >>>=================================================
> >>>Errors Output
> >>>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
> >>>
> >>>Debug Output
> >>>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
> >>>=====================================================
> >>>
> >>>But when I reload the application, I don't receive this error.
> >>>Any
> >>>thoughts on this?
> >>>
> >>>Thanks in advance,
> >>>Sangeeth
> >>>
> >>>
> >>>
> >>>
> >>>---------------------------------------------------------------------
> >>>To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
> >>>For additional commands, e-mail: asp-help@perl.apache.org
> >>>
> >>>
> >>>
> >>>
> >>>
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Application Variable not getting created
Posted by Helmut Zeilinger <hz...@hzlabs.de>.
Hi,
that's is what one was expecting.. good ..
The next things i would do:
- is global.asa really been executed? Test it with a "print" or "die" in it
- if ok, try to add a "Script_OnStart" Handler, that calls
Session_OnStart() to enshure,
that it is called at each page reload..
Question: In your httpd.conf you set several Perl Variables twice - e.g.
Global -
Is there a special reason for you to do this outside of the "<Files ~
(\.asp)>" - scope ?
If not, "unify" theese entries an place it inside the <Files > scope.
Helmut
>When I try this I get the value 'Checklist::Users'. Following is the script
>I ran.
>
><%
>use Checklist::Users;
>
>my $users = new Checklist::Users();
>$Application->{'ChecklistWeb::UsersObj'} = $users;
>print ref ($Application->{'ChecklistWeb::UsersObj'});
>$Application->{'ChecklistWeb::UsersObj'} = undef;
>%>
>
>
>Thanks,
>Sangeeth
>
>
>
>----- Original Message -----
>From: "Helmut Zeilinger" <hz...@hzlabs.de>
>To: "sangeethvs" <sa...@masconit.com>
>Cc: <as...@perl.apache.org>
>Sent: Monday, May 23, 2005 11:49 AM
>Subject: Re: Application Variable not getting created
>
>
>
>
>>Hi sangeethvs,
>>
>>just to make things less complicated - does it work when
>>you call
>>
>>...
>>
>>$Application->{'ChecklistWeb::UsersObj'} = $users;
>>print ref ($Application->{'ChecklistWeb::UsersObj'});
>>$Application->{'ChecklistWeb::UsersObj'} = undef;
>>...
>>
>>in ONE test (asp) script?
>>
>>Helmut
>>
>>
>>
>>
>>
>>
>>>I'm trying to move an existing application in Perl and Postgres
>>>to a
>>>new server with Oracle as database. I have installed the necessary
>>>modules (I think so) but I'm getting errors while running the
>>>application. The programming is done in object oriented Perl and
>>>unfortunately I have no experience in object oriented Perl.
>>>
>>>But what I have come to understand is that, when the application
>>>starts an application variable is created and further actions in the
>>>applications are based on the value in this variable. It looks like
>>>that this application variable is not getting created and this is
>>>causing the errors I'm facing. I also verified it by printing
>>>the
>>>contents of the application variable. Nothing gets printed.
>>>
>>>The contents of global.asa file are given below.
>>>
>>>==================================================
>>>use lib ".";
>>>use lib "/usr/local/lib/perl5/site_perl/5.8.6";
>>>
>>>use Checklist::Users;
>>>
>>>sub Script_OnStart {
>>> use lib "./lib";
>>>}
>>>
>>>sub Session_OnStart {
>>> # THIS IS FOR THE GRAPH STUFF
>>> my $ID = $Session->{SessionID};
>>> my $DIR = "/usr/local/apache/htdocs/images/graphs";
>>> system("mkdir $DIR/$ID");
>>> $Session->{WriteGraphDir} = "$DIR";
>>> $Session->{SRCGraphDir} = "/images/graphs";
>>> &Application_OnStart();
>>>}
>>>
>>>sub Session_OnEnd {
>>> # THIS IS FOR THE GRAPH STUFF
>>> my $ID = $Session->{SessionID};
>>> system ("rm -rf /usr/local/apache/htdocs/images/graphs/$ID") if
>>>($ID);
>>>}
>>>
>>>sub Application_OnStart {
>>> # Load up the users
>>> my $users = new Checklist::Users();
>>> $Application->{'ChecklistWeb::UsersObj'} = $users;
>>>}
>>>
>>>sub Application_OnEnd {
>>> $Application->{'ChecklistWeb::UsersObj'} = undef;
>>>}
>>>
>>>==================================================
>>>
>>>The configuration section of httpd.conf is given below
>>>
>>>=============================================================
>>><Files ~ (\.asp)>
>>> AllowOverride All
>>> Allow from all
>>> SetHandler perl-script
>>> PerlModule Apache::DBI
>>> PerlHandler Apache::ASP
>>> PerlSetVar SessionTimeout 120
>>> PerlSetVar StateManager 60
>>> PerlSetVar StateDB DB_File
>>> PerlSetVar Global /usr/local/apache/htdocs
>>> PerlSetVar StateDir /tmp/WebData
>>> PerlSetVar Debug 2
>>></Files>
>>>
>>>PerlSetVar Global .
>>>PerlSetVar GlobalPackage Apache::ASP::Demo
>>>PerlSetVar StateDir /tmp/asp
>>>PerlSetVar StatINC 0
>>>PerlSetVar StatINCMatch 0
>>>PerlSetVar Clean 0
>>>PerlSetVar DynamicIncludes 1
>>>PerlSetVar FileUploadMax 500000
>>>PerlSetVar FileUploadTemp 1
>>>PerlSetVar SessionQueryParse 0
>>>PerlSetVar SessionQuery 1
>>>PerlSetVar Debug -3
>>>PerlSetVar StateCache 0
>>>PerlSetVar SessionCount 1
>>>PerlSetVar TimeHiRes 1
>>>PerlSetVar CompressGzip 0
>>>PerlSetVar UseStrict 1
>>>=============================================================
>>>
>>>Following are the Perl modules that I have installed
>>>· CGI
>>>· DBI
>>>· DBD::Oracle
>>>· Bundle::Apache::ASP
>>>· Apache::DBI
>>>· DB_File
>>>· GD (2.23)
>>>· GD::Text
>>>· GD::Graph
>>>· FreezeThaw
>>>
>>>The output of perl –V is
>>>=================================================================
>>>Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
>>> Platform:
>>> osname=solaris, osvers=2.8, archname=sun4-solaris
>>> uname='sunos parker 5.8 generic_117350-07 sun4u sparc sunw,ultra-
>>>4 '
>>> config_args='-de'
>>> hint=recommended, useposix=true, d_sigaction=define
>>> usethreads=undef use5005threads=undef useithreads=undef
>>>usemultiplicity=undef
>>> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
>>> use64bitint=undef use64bitall=undef uselongdouble=undef
>>> usemymalloc=n, bincompat5005=undef
>>> Compiler:
>>> cc='gcc', ccflags ='-fno-strict-aliasing -pipe -
>>>I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
>>> optimize='-O',
>>> cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
>>> ccversion='', gccversion='3.3.2', gccosandvers='solaris2.8'
>>> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
>>> d_longlong=define, longlongsize=8, d_longdbl=define,
>>>longdblsize=16
>>> ivtype='long', ivsize=4, nvtype='double', nvsize=8,
>>>Off_t='off_t', lseeksize=8
>>> alignbytes=8, prototype=define
>>> Linker and Libraries:
>>> ld='gcc', ldflags =' -L/usr/local/lib '
>>> libpth=/usr/local/lib /usr/lib /usr/ccs/lib
>>> libs=-lsocket -lnsl -ldl -lm -lc
>>> perllibs=-lsocket -lnsl -ldl -lm -lc
>>> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
>>> gnulibc_version=''
>>> Dynamic Linking:
>>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
>>> cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
>>>
>>>
>>>Characteristics of this binary (from libperl):
>>> Compile-time options: USE_LARGE_FILES
>>> Built under solaris
>>> Compiled at Mar 21 2005 23:54:20
>>> @INC:
>>> /usr/local/lib/perl5/5.8.6/sun4-solaris
>>> /usr/local/lib/perl5/5.8.6
>>> /usr/local/lib/perl5/site_perl/5.8.6/sun4-solaris
>>> /usr/local/lib/perl5/site_perl/5.8.6
>>> /usr/local/lib/perl5/site_perl
>>> .
>>>==================================================================
>>>
>>>Could anyone please let me know what could be the problem? Please
>>>let me know if you need any further information from me.
>>>
>>>I also notice another problem with .asp files. When I run an .asp
>>>file for the first time in a new browser, I get the following error.
>>>
>>>=================================================
>>>Errors Output
>>>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
>>>
>>>Debug Output
>>>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
>>>=====================================================
>>>
>>>But when I reload the application, I don't receive this error.
>>>Any
>>>thoughts on this?
>>>
>>>Thanks in advance,
>>>Sangeeth
>>>
>>>
>>>
>>>
>>>---------------------------------------------------------------------
>>>To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
>>>For additional commands, e-mail: asp-help@perl.apache.org
>>>
>>>
>>>
>>>
>>>
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org
Re: Application Variable not getting created
Posted by Helmut Zeilinger <hz...@hzlabs.de>.
Hi sangeethvs,
just to make things less complicated - does it work when
you call
...
$Application->{'ChecklistWeb::UsersObj'} = $users;
print ref ($Application->{'ChecklistWeb::UsersObj'});
$Application->{'ChecklistWeb::UsersObj'} = undef;
...
in ONE test (asp) script?
Helmut
>I'm trying to move an existing application in Perl and Postgres
>to a
>new server with Oracle as database. I have installed the necessary
>modules (I think so) but I'm getting errors while running the
>application. The programming is done in object oriented Perl and
>unfortunately I have no experience in object oriented Perl.
>
>But what I have come to understand is that, when the application
>starts an application variable is created and further actions in the
>applications are based on the value in this variable. It looks like
>that this application variable is not getting created and this is
>causing the errors I'm facing. I also verified it by printing
>the
>contents of the application variable. Nothing gets printed.
>
>The contents of global.asa file are given below.
>
>==================================================
>use lib ".";
>use lib "/usr/local/lib/perl5/site_perl/5.8.6";
>
>use Checklist::Users;
>
>sub Script_OnStart {
> use lib "./lib";
>}
>
>sub Session_OnStart {
> # THIS IS FOR THE GRAPH STUFF
> my $ID = $Session->{SessionID};
> my $DIR = "/usr/local/apache/htdocs/images/graphs";
> system("mkdir $DIR/$ID");
> $Session->{WriteGraphDir} = "$DIR";
> $Session->{SRCGraphDir} = "/images/graphs";
> &Application_OnStart();
>}
>
>sub Session_OnEnd {
> # THIS IS FOR THE GRAPH STUFF
> my $ID = $Session->{SessionID};
> system ("rm -rf /usr/local/apache/htdocs/images/graphs/$ID") if
>($ID);
>}
>
>sub Application_OnStart {
> # Load up the users
> my $users = new Checklist::Users();
> $Application->{'ChecklistWeb::UsersObj'} = $users;
>}
>
>sub Application_OnEnd {
> $Application->{'ChecklistWeb::UsersObj'} = undef;
>}
>
>==================================================
>
>The configuration section of httpd.conf is given below
>
>=============================================================
><Files ~ (\.asp)>
> AllowOverride All
> Allow from all
> SetHandler perl-script
> PerlModule Apache::DBI
> PerlHandler Apache::ASP
> PerlSetVar SessionTimeout 120
> PerlSetVar StateManager 60
> PerlSetVar StateDB DB_File
> PerlSetVar Global /usr/local/apache/htdocs
> PerlSetVar StateDir /tmp/WebData
> PerlSetVar Debug 2
></Files>
>
>PerlSetVar Global .
>PerlSetVar GlobalPackage Apache::ASP::Demo
>PerlSetVar StateDir /tmp/asp
>PerlSetVar StatINC 0
>PerlSetVar StatINCMatch 0
>PerlSetVar Clean 0
>PerlSetVar DynamicIncludes 1
>PerlSetVar FileUploadMax 500000
>PerlSetVar FileUploadTemp 1
>PerlSetVar SessionQueryParse 0
>PerlSetVar SessionQuery 1
>PerlSetVar Debug -3
>PerlSetVar StateCache 0
>PerlSetVar SessionCount 1
>PerlSetVar TimeHiRes 1
>PerlSetVar CompressGzip 0
>PerlSetVar UseStrict 1
>=============================================================
>
>Following are the Perl modules that I have installed
>· CGI
>· DBI
>· DBD::Oracle
>· Bundle::Apache::ASP
>· Apache::DBI
>· DB_File
>· GD (2.23)
>· GD::Text
>· GD::Graph
>· FreezeThaw
>
>The output of perl –V is
>=================================================================
>Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
> Platform:
> osname=solaris, osvers=2.8, archname=sun4-solaris
> uname='sunos parker 5.8 generic_117350-07 sun4u sparc sunw,ultra-
>4 '
> config_args='-de'
> hint=recommended, useposix=true, d_sigaction=define
> usethreads=undef use5005threads=undef useithreads=undef
>usemultiplicity=undef
> useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
> use64bitint=undef use64bitall=undef uselongdouble=undef
> usemymalloc=n, bincompat5005=undef
> Compiler:
> cc='gcc', ccflags ='-fno-strict-aliasing -pipe -
>I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
> optimize='-O',
> cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
> ccversion='', gccversion='3.3.2', gccosandvers='solaris2.8'
> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
> d_longlong=define, longlongsize=8, d_longdbl=define,
>longdblsize=16
> ivtype='long', ivsize=4, nvtype='double', nvsize=8,
>Off_t='off_t', lseeksize=8
> alignbytes=8, prototype=define
> Linker and Libraries:
> ld='gcc', ldflags =' -L/usr/local/lib '
> libpth=/usr/local/lib /usr/lib /usr/ccs/lib
> libs=-lsocket -lnsl -ldl -lm -lc
> perllibs=-lsocket -lnsl -ldl -lm -lc
> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
> gnulibc_version=''
> Dynamic Linking:
> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
> cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
>
>
>Characteristics of this binary (from libperl):
> Compile-time options: USE_LARGE_FILES
> Built under solaris
> Compiled at Mar 21 2005 23:54:20
> @INC:
> /usr/local/lib/perl5/5.8.6/sun4-solaris
> /usr/local/lib/perl5/5.8.6
> /usr/local/lib/perl5/site_perl/5.8.6/sun4-solaris
> /usr/local/lib/perl5/site_perl/5.8.6
> /usr/local/lib/perl5/site_perl
> .
>==================================================================
>
>Could anyone please let me know what could be the problem? Please
>let me know if you need any further information from me.
>
>I also notice another problem with .asp files. When I run an .asp
>file for the first time in a new browser, I get the following error.
>
>=================================================
>Errors Output
>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
>
>Debug Output
>, /usr/local/lib/perl5/site_perl/5.8.6/Apache/ASP.pm line 1518
>=====================================================
>
>But when I reload the application, I don't receive this error.
>Any
>thoughts on this?
>
>Thanks in advance,
>Sangeeth
>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
>For additional commands, e-mail: asp-help@perl.apache.org
>
>
>
--
HZ.labs
Dr. Helmut Zeilinger
Wiesengrund 2
D-86 684 Holzheim
Tel 08276/58767
Fax. 08276/´58787
Mobil 0160 91 55 61 68
Internet http://www.hzlabs.de
Mail hz@hzlabs.de
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe@perl.apache.org
For additional commands, e-mail: asp-help@perl.apache.org