You are viewing a plain text version of this content. The canonical link for it is here.
Posted to c-users@xerces.apache.org by Vinutha Nagaraju <Vi...@Sun.COM> on 2009/11/20 07:45:08 UTC
Xerces 2.6.0 Build on windows
Hi,
I have a query on building Xerces 2.6.0 on Windows.
I have followed the instructions provided in Readme.html. I have opened
the Project
Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
errors, I am not sure if the final bits created is what is expected.
I see the following files created in Build/Win32/VC6/Debug/
-rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
-rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
-rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
-rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24 xerces-c_2_6D.ilk
-rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
Can someone please confirm if the above files are windows expected
files ? If not, what is missing and how to built it ?
Thanks,
Vinu
Re: Xerces 2.6.0 Build on windows
Posted by Vinutha Nagaraju <Vi...@Sun.COM>.
I think I could resolve it. I manually ran nmake with CFG pointing to
release.
That seems to go through now.
Thanks a lot for all the comments provided so far.
regards,
Vinu
Vinutha Nagaraju wrote:
> Alberto Massari wrote:
>> xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in
>> order to select the release build you can use the combo box in the
>> toolbar. If you don't see it, right click on the toolbar area and
>> select it from the list (usually it's the mini-build toolbar that is
>> displayed, the one with just the buttons to start the build)
>>
> I have attached the screen shot of my workspace. I used the mini tool
> bar as u suggested even then, it doesn't work.
> Basically in the output window, it says no configuration specified
> hence defaulting to debug build.
>
> When I loaded the Xerceslib.dsp, there was warning that this project
> wasn't built using Developer studio, so it would create another
> Makefile as a wrapper to the existing one. Not sure because of that it
> if something is wrong. I see that after building the debug bits, there
> three new files created.
> 1. xerceslib.opt
> 2. xerceslib.dsw
> 3. xerceslib1.dsp
> 4. xerceslib1.plg
> Is there a way I could edit the Makefile manually to build release
> bits by default ?
>
> THanks,
> Vinu
>
>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>> Thanks for the quick response.
>>> I am not able to build the release version.
>>> In MSVC, under Build tab, I selected "Set Active Configuration" to
>>> "Release". But it still builds debug version.
>>> any clue ?
>>> One more question, In the past someone else in my team had built
>>> windows and in his workspace I see two extra libraries
>>> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
>>> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
>>> Are these release and debug bits by any chance ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>> Alberto Massari wrote:
>>>> That's the "debug" folder; you should also select the "Release"
>>>> configuration, and build it. The output for that configuration will
>>>> be in the Build/VC6/Release folder.
>>>> Also, if you use the deprecated DOM, you should select the
>>>> DeprecatedDOM project, right click to get the popup menu, and
>>>> choose Build
>>>>
>>>> Alberto
>>>>
>>>> Vinutha Nagaraju wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I have a query on building Xerces 2.6.0 on Windows.
>>>>> I have followed the instructions provided in Readme.html. I have
>>>>> opened the Project
>>>>>
>>>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>>>
>>>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>>>> errors, I am not sure if the final bits created is what is expected.
>>>>>
>>>>> I see the following files created in Build/Win32/VC6/Debug/
>>>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24
>>>>> xerces-c_2_6D.pdb
>>>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>>>> xerces-c_2_6D.ilk
>>>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24
>>>>> xerces-c_2_6D.dll
>>>>>
>>>>> Can someone please confirm if the above files are windows
>>>>> expected files ? If not, what is missing and how to built it ?
>>>>>
>>>>> Thanks,
>>>>> Vinu
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>
>>>
>
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
Let's start from scratch:
1) download
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_6_0/xerces-c-src_2_6_0.zip
2) unzip to a new folder
3) start VC6, open <xerces>/Projects/Win32/VC6/xerces-all/xerces-all.dsw
4) click on the Build menu, select Batch Build then click Rebuild All
Alberto
Vinutha Nagaraju wrote:
> Alberto Massari wrote:
>> xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in
>> order to select the release build you can use the combo box in the
>> toolbar. If you don't see it, right click on the toolbar area and
>> select it from the list (usually it's the mini-build toolbar that is
>> displayed, the one with just the buttons to start the build)
>>
> I have attached the screen shot of my workspace. I used the mini tool
> bar as u suggested even then, it doesn't work.
> Basically in the output window, it says no configuration specified
> hence defaulting to debug build.
>
> When I loaded the Xerceslib.dsp, there was warning that this project
> wasn't built using Developer studio, so it would create another
> Makefile as a wrapper to the existing one. Not sure because of that it
> if something is wrong. I see that after building the debug bits, there
> three new files created.
> 1. xerceslib.opt
> 2. xerceslib.dsw
> 3. xerceslib1.dsp
> 4. xerceslib1.plg
> Is there a way I could edit the Makefile manually to build release
> bits by default ?
>
> THanks,
> Vinu
>
>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>> Thanks for the quick response.
>>> I am not able to build the release version.
>>> In MSVC, under Build tab, I selected "Set Active Configuration" to
>>> "Release". But it still builds debug version.
>>> any clue ?
>>> One more question, In the past someone else in my team had built
>>> windows and in his workspace I see two extra libraries
>>> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
>>> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
>>> Are these release and debug bits by any chance ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>> Alberto Massari wrote:
>>>> That's the "debug" folder; you should also select the "Release"
>>>> configuration, and build it. The output for that configuration will
>>>> be in the Build/VC6/Release folder.
>>>> Also, if you use the deprecated DOM, you should select the
>>>> DeprecatedDOM project, right click to get the popup menu, and
>>>> choose Build
>>>>
>>>> Alberto
>>>>
>>>> Vinutha Nagaraju wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I have a query on building Xerces 2.6.0 on Windows.
>>>>> I have followed the instructions provided in Readme.html. I have
>>>>> opened the Project
>>>>>
>>>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>>>
>>>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>>>> errors, I am not sure if the final bits created is what is expected.
>>>>>
>>>>> I see the following files created in Build/Win32/VC6/Debug/
>>>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24
>>>>> xerces-c_2_6D.pdb
>>>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>>>> xerces-c_2_6D.ilk
>>>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24
>>>>> xerces-c_2_6D.dll
>>>>>
>>>>> Can someone please confirm if the above files are windows
>>>>> expected files ? If not, what is missing and how to built it ?
>>>>>
>>>>> Thanks,
>>>>> Vinu
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
For additional commands, e-mail: c-dev-help@xerces.apache.org
Re: Xerces 2.6.0 Build on windows
Posted by Vinutha Nagaraju <Vi...@Sun.COM>.
I think I could resolve it. I manually ran nmake with CFG pointing to
release.
That seems to go through now.
Thanks a lot for all the comments provided so far.
regards,
Vinu
Vinutha Nagaraju wrote:
> Alberto Massari wrote:
>> xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in
>> order to select the release build you can use the combo box in the
>> toolbar. If you don't see it, right click on the toolbar area and
>> select it from the list (usually it's the mini-build toolbar that is
>> displayed, the one with just the buttons to start the build)
>>
> I have attached the screen shot of my workspace. I used the mini tool
> bar as u suggested even then, it doesn't work.
> Basically in the output window, it says no configuration specified
> hence defaulting to debug build.
>
> When I loaded the Xerceslib.dsp, there was warning that this project
> wasn't built using Developer studio, so it would create another
> Makefile as a wrapper to the existing one. Not sure because of that it
> if something is wrong. I see that after building the debug bits, there
> three new files created.
> 1. xerceslib.opt
> 2. xerceslib.dsw
> 3. xerceslib1.dsp
> 4. xerceslib1.plg
> Is there a way I could edit the Makefile manually to build release
> bits by default ?
>
> THanks,
> Vinu
>
>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>> Thanks for the quick response.
>>> I am not able to build the release version.
>>> In MSVC, under Build tab, I selected "Set Active Configuration" to
>>> "Release". But it still builds debug version.
>>> any clue ?
>>> One more question, In the past someone else in my team had built
>>> windows and in his workspace I see two extra libraries
>>> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
>>> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
>>> Are these release and debug bits by any chance ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>> Alberto Massari wrote:
>>>> That's the "debug" folder; you should also select the "Release"
>>>> configuration, and build it. The output for that configuration will
>>>> be in the Build/VC6/Release folder.
>>>> Also, if you use the deprecated DOM, you should select the
>>>> DeprecatedDOM project, right click to get the popup menu, and
>>>> choose Build
>>>>
>>>> Alberto
>>>>
>>>> Vinutha Nagaraju wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I have a query on building Xerces 2.6.0 on Windows.
>>>>> I have followed the instructions provided in Readme.html. I have
>>>>> opened the Project
>>>>>
>>>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>>>
>>>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>>>> errors, I am not sure if the final bits created is what is expected.
>>>>>
>>>>> I see the following files created in Build/Win32/VC6/Debug/
>>>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24
>>>>> xerces-c_2_6D.pdb
>>>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>>>> xerces-c_2_6D.ilk
>>>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24
>>>>> xerces-c_2_6D.dll
>>>>>
>>>>> Can someone please confirm if the above files are windows
>>>>> expected files ? If not, what is missing and how to built it ?
>>>>>
>>>>> Thanks,
>>>>> Vinu
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>
>>>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
For additional commands, e-mail: c-dev-help@xerces.apache.org
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
Let's start from scratch:
1) download
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_6_0/xerces-c-src_2_6_0.zip
2) unzip to a new folder
3) start VC6, open <xerces>/Projects/Win32/VC6/xerces-all/xerces-all.dsw
4) click on the Build menu, select Batch Build then click Rebuild All
Alberto
Vinutha Nagaraju wrote:
> Alberto Massari wrote:
>> xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in
>> order to select the release build you can use the combo box in the
>> toolbar. If you don't see it, right click on the toolbar area and
>> select it from the list (usually it's the mini-build toolbar that is
>> displayed, the one with just the buttons to start the build)
>>
> I have attached the screen shot of my workspace. I used the mini tool
> bar as u suggested even then, it doesn't work.
> Basically in the output window, it says no configuration specified
> hence defaulting to debug build.
>
> When I loaded the Xerceslib.dsp, there was warning that this project
> wasn't built using Developer studio, so it would create another
> Makefile as a wrapper to the existing one. Not sure because of that it
> if something is wrong. I see that after building the debug bits, there
> three new files created.
> 1. xerceslib.opt
> 2. xerceslib.dsw
> 3. xerceslib1.dsp
> 4. xerceslib1.plg
> Is there a way I could edit the Makefile manually to build release
> bits by default ?
>
> THanks,
> Vinu
>
>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>> Thanks for the quick response.
>>> I am not able to build the release version.
>>> In MSVC, under Build tab, I selected "Set Active Configuration" to
>>> "Release". But it still builds debug version.
>>> any clue ?
>>> One more question, In the past someone else in my team had built
>>> windows and in his workspace I see two extra libraries
>>> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
>>> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
>>> Are these release and debug bits by any chance ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>> Alberto Massari wrote:
>>>> That's the "debug" folder; you should also select the "Release"
>>>> configuration, and build it. The output for that configuration will
>>>> be in the Build/VC6/Release folder.
>>>> Also, if you use the deprecated DOM, you should select the
>>>> DeprecatedDOM project, right click to get the popup menu, and
>>>> choose Build
>>>>
>>>> Alberto
>>>>
>>>> Vinutha Nagaraju wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I have a query on building Xerces 2.6.0 on Windows.
>>>>> I have followed the instructions provided in Readme.html. I have
>>>>> opened the Project
>>>>>
>>>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>>>
>>>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>>>> errors, I am not sure if the final bits created is what is expected.
>>>>>
>>>>> I see the following files created in Build/Win32/VC6/Debug/
>>>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24
>>>>> xerces-c_2_6D.pdb
>>>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>>>> xerces-c_2_6D.ilk
>>>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24
>>>>> xerces-c_2_6D.dll
>>>>>
>>>>> Can someone please confirm if the above files are windows
>>>>> expected files ? If not, what is missing and how to built it ?
>>>>>
>>>>> Thanks,
>>>>> Vinu
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
Re: Xerces 2.6.0 Build on windows
Posted by Vinutha Nagaraju <Vi...@Sun.COM>.
Alberto Massari wrote:
> xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in
> order to select the release build you can use the combo box in the
> toolbar. If you don't see it, right click on the toolbar area and
> select it from the list (usually it's the mini-build toolbar that is
> displayed, the one with just the buttons to start the build)
>
I have attached the screen shot of my workspace. I used the mini tool
bar as u suggested even then, it doesn't work.
Basically in the output window, it says no configuration specified
hence defaulting to debug build.
When I loaded the Xerceslib.dsp, there was warning that this project
wasn't built using Developer studio, so it would create another Makefile
as a wrapper to the existing one. Not sure because of that it if
something is wrong. I see that after building the debug bits, there
three new files created.
1. xerceslib.opt
2. xerceslib.dsw
3. xerceslib1.dsp
4. xerceslib1.plg
Is there a way I could edit the Makefile manually to build release bits
by default ?
THanks,
Vinu
> Alberto
>
> Vinutha Nagaraju wrote:
>> Thanks for the quick response.
>> I am not able to build the release version.
>> In MSVC, under Build tab, I selected "Set Active Configuration" to
>> "Release". But it still builds debug version.
>> any clue ?
>> One more question, In the past someone else in my team had built
>> windows and in his workspace I see two extra libraries
>> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
>> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
>> Are these release and debug bits by any chance ?
>>
>> Thanks,
>> Vinu
>>
>>
>> Alberto Massari wrote:
>>> That's the "debug" folder; you should also select the "Release"
>>> configuration, and build it. The output for that configuration will
>>> be in the Build/VC6/Release folder.
>>> Also, if you use the deprecated DOM, you should select the
>>> DeprecatedDOM project, right click to get the popup menu, and choose
>>> Build
>>>
>>> Alberto
>>>
>>> Vinutha Nagaraju wrote:
>>>>
>>>> Hi,
>>>>
>>>> I have a query on building Xerces 2.6.0 on Windows.
>>>> I have followed the instructions provided in Readme.html. I have
>>>> opened the Project
>>>>
>>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>>
>>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>>> errors, I am not sure if the final bits created is what is expected.
>>>>
>>>> I see the following files created in Build/Win32/VC6/Debug/
>>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24
>>>> xerces-c_2_6D.pdb
>>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>>> xerces-c_2_6D.ilk
>>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24
>>>> xerces-c_2_6D.dll
>>>>
>>>> Can someone please confirm if the above files are windows expected
>>>> files ? If not, what is missing and how to built it ?
>>>>
>>>> Thanks,
>>>> Vinu
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
>
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in order
to select the release build you can use the combo box in the toolbar. If
you don't see it, right click on the toolbar area and select it from the
list (usually it's the mini-build toolbar that is displayed, the one
with just the buttons to start the build)
Alberto
Vinutha Nagaraju wrote:
> Thanks for the quick response.
> I am not able to build the release version.
> In MSVC, under Build tab, I selected "Set Active Configuration" to
> "Release". But it still builds debug version.
> any clue ?
> One more question, In the past someone else in my team had built
> windows and in his workspace I see two extra libraries
> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
> Are these release and debug bits by any chance ?
>
> Thanks,
> Vinu
>
>
> Alberto Massari wrote:
>> That's the "debug" folder; you should also select the "Release"
>> configuration, and build it. The output for that configuration will
>> be in the Build/VC6/Release folder.
>> Also, if you use the deprecated DOM, you should select the
>> DeprecatedDOM project, right click to get the popup menu, and choose
>> Build
>>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>>
>>> Hi,
>>>
>>> I have a query on building Xerces 2.6.0 on Windows.
>>> I have followed the instructions provided in Readme.html. I have
>>> opened the Project
>>>
>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>
>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>> errors, I am not sure if the final bits created is what is expected.
>>>
>>> I see the following files created in Build/Win32/VC6/Debug/
>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>> xerces-c_2_6D.ilk
>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>>>
>>> Can someone please confirm if the above files are windows expected
>>> files ? If not, what is missing and how to built it ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
For additional commands, e-mail: c-dev-help@xerces.apache.org
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
xerces-c_2.lib and xerces-depdom_2.lib are the Release builds; in order
to select the release build you can use the combo box in the toolbar. If
you don't see it, right click on the toolbar area and select it from the
list (usually it's the mini-build toolbar that is displayed, the one
with just the buttons to start the build)
Alberto
Vinutha Nagaraju wrote:
> Thanks for the quick response.
> I am not able to build the release version.
> In MSVC, under Build tab, I selected "Set Active Configuration" to
> "Release". But it still builds debug version.
> any clue ?
> One more question, In the past someone else in my team had built
> windows and in his workspace I see two extra libraries
> "xerces-c_2.lib" and "xerces-depdom_2.lib". This is missing in my
> workspace, I only have xerces-c_2D.lib and Xerces-depdom_2D.lib.
> Are these release and debug bits by any chance ?
>
> Thanks,
> Vinu
>
>
> Alberto Massari wrote:
>> That's the "debug" folder; you should also select the "Release"
>> configuration, and build it. The output for that configuration will
>> be in the Build/VC6/Release folder.
>> Also, if you use the deprecated DOM, you should select the
>> DeprecatedDOM project, right click to get the popup menu, and choose
>> Build
>>
>> Alberto
>>
>> Vinutha Nagaraju wrote:
>>>
>>> Hi,
>>>
>>> I have a query on building Xerces 2.6.0 on Windows.
>>> I have followed the instructions provided in Readme.html. I have
>>> opened the Project
>>>
>>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>>
>>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>>> errors, I am not sure if the final bits created is what is expected.
>>>
>>> I see the following files created in Build/Win32/VC6/Debug/
>>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
>>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24
>>> xerces-c_2_6D.ilk
>>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>>>
>>> Can someone please confirm if the above files are windows expected
>>> files ? If not, what is missing and how to built it ?
>>>
>>> Thanks,
>>> Vinu
>>>
>>>
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
>> For additional commands, e-mail: c-dev-help@xerces.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
>
>
Re: Xerces 2.6.0 Build on windows
Posted by Vinutha Nagaraju <Vi...@Sun.COM>.
Thanks for the quick response.
I am not able to build the release version.
In MSVC, under Build tab, I selected "Set Active Configuration" to
"Release". But it still builds debug version.
any clue ?
One more question, In the past someone else in my team had built windows
and in his workspace I see two extra libraries "xerces-c_2.lib" and
"xerces-depdom_2.lib". This is missing in my workspace, I only have
xerces-c_2D.lib and Xerces-depdom_2D.lib.
Are these release and debug bits by any chance ?
Thanks,
Vinu
Alberto Massari wrote:
> That's the "debug" folder; you should also select the "Release"
> configuration, and build it. The output for that configuration will be
> in the Build/VC6/Release folder.
> Also, if you use the deprecated DOM, you should select the
> DeprecatedDOM project, right click to get the popup menu, and choose
> Build
>
> Alberto
>
> Vinutha Nagaraju wrote:
>>
>> Hi,
>>
>> I have a query on building Xerces 2.6.0 on Windows.
>> I have followed the instructions provided in Readme.html. I have
>> opened the Project
>>
>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>
>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>> errors, I am not sure if the final bits created is what is expected.
>>
>> I see the following files created in Build/Win32/VC6/Debug/
>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24 xerces-c_2_6D.ilk
>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>>
>> Can someone please confirm if the above files are windows expected
>> files ? If not, what is missing and how to built it ?
>>
>> Thanks,
>> Vinu
>>
>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
>
---------------------------------------------------------------------
To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
For additional commands, e-mail: c-dev-help@xerces.apache.org
Re: Xerces 2.6.0 Build on windows
Posted by Vinutha Nagaraju <Vi...@Sun.COM>.
Thanks for the quick response.
I am not able to build the release version.
In MSVC, under Build tab, I selected "Set Active Configuration" to
"Release". But it still builds debug version.
any clue ?
One more question, In the past someone else in my team had built windows
and in his workspace I see two extra libraries "xerces-c_2.lib" and
"xerces-depdom_2.lib". This is missing in my workspace, I only have
xerces-c_2D.lib and Xerces-depdom_2D.lib.
Are these release and debug bits by any chance ?
Thanks,
Vinu
Alberto Massari wrote:
> That's the "debug" folder; you should also select the "Release"
> configuration, and build it. The output for that configuration will be
> in the Build/VC6/Release folder.
> Also, if you use the deprecated DOM, you should select the
> DeprecatedDOM project, right click to get the popup menu, and choose
> Build
>
> Alberto
>
> Vinutha Nagaraju wrote:
>>
>> Hi,
>>
>> I have a query on building Xerces 2.6.0 on Windows.
>> I have followed the instructions provided in Readme.html. I have
>> opened the Project
>>
>> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>>
>> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
>> errors, I am not sure if the final bits created is what is expected.
>>
>> I see the following files created in Build/Win32/VC6/Debug/
>> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
>> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
>> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
>> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24 xerces-c_2_6D.ilk
>> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>>
>> Can someone please confirm if the above files are windows expected
>> files ? If not, what is missing and how to built it ?
>>
>> Thanks,
>> Vinu
>>
>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
> For additional commands, e-mail: c-dev-help@xerces.apache.org
>
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
That's the "debug" folder; you should also select the "Release"
configuration, and build it. The output for that configuration will be
in the Build/VC6/Release folder.
Also, if you use the deprecated DOM, you should select the DeprecatedDOM
project, right click to get the popup menu, and choose Build
Alberto
Vinutha Nagaraju wrote:
>
> Hi,
>
> I have a query on building Xerces 2.6.0 on Windows.
> I have followed the instructions provided in Readme.html. I have
> opened the Project
>
> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>
> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
> errors, I am not sure if the final bits created is what is expected.
>
> I see the following files created in Build/Win32/VC6/Debug/
> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24 xerces-c_2_6D.ilk
> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>
> Can someone please confirm if the above files are windows expected
> files ? If not, what is missing and how to built it ?
>
> Thanks,
> Vinu
>
>
>
>
Re: Xerces 2.6.0 Build on windows
Posted by Alberto Massari <am...@datadirect.com>.
That's the "debug" folder; you should also select the "Release"
configuration, and build it. The output for that configuration will be
in the Build/VC6/Release folder.
Also, if you use the deprecated DOM, you should select the DeprecatedDOM
project, right click to get the popup menu, and choose Build
Alberto
Vinutha Nagaraju wrote:
>
> Hi,
>
> I have a query on building Xerces 2.6.0 on Windows.
> I have followed the instructions provided in Readme.html. I have
> opened the Project
>
> Projects\Win32\VC6\xerces-all\XercesLib\XercesLib.dsw
>
> in MSVC6.0. Then built Xerceslib. Though I haven't seen any build
> errors, I am not sure if the final bits created is what is expected.
>
> I see the following files created in Build/Win32/VC6/Debug/
> -rwxr-xr-x 1 nobody nobody 2977668 Nov 17 13:24 xerces-c_2D.lib
> -rwxr-xr-x 1 nobody nobody 1820661 Nov 17 13:24 xerces-c_2D.exp
> -rwxr-xr-x 1 nobody nobody 4719616 Nov 17 13:24 xerces-c_2_6D.pdb
> -rwxr-xr-x 1 nobody nobody 21348168 Nov 17 13:24 xerces-c_2_6D.ilk
> -rwxr-xr-x 1 nobody nobody 3219545 Nov 17 13:24 xerces-c_2_6D.dll
>
> Can someone please confirm if the above files are windows expected
> files ? If not, what is missing and how to built it ?
>
> Thanks,
> Vinu
>
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: c-dev-unsubscribe@xerces.apache.org
For additional commands, e-mail: c-dev-help@xerces.apache.org