You are viewing a plain text version of this content. The canonical link for it is here.
Posted to fop-users@xmlgraphics.apache.org by Roberto Cahanap <rc...@BioReference.com> on 2011/02/02 15:11:42 UTC
font missing warning
Hello!
We are getting this warning when we try to create a PDF:
Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo notifyFontReplacement
WARNING: Font 'Consolas,normal,400' not found. Substituting with 'any,normal,400'.
Our environment - we have another program that creates the XML and XSL. We use FOP to create the PDF from these files.
Some things to note about our problem:
- If we have a simple XSL, then we don't get this error
- We have two environments (TEST and PRODUCTION), it works OK in our TEST environment
- We are using FOP 0.95
- We use <auto-detect/> in the fop configuration file to detect the font.
Does anybody know what could be causing this issue?
Thank you!
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Hi Mehdi,
OK, I will tell it explicitly where the font is located. Hopefully that will solve the problem
Thank you for helping.
Roberto Cahanap
Developer, Reporting Department
Bio-Reference Laboratories, Inc.
Phone: 800-229-5227 x8499
Cell: 201-693-0132
Fax: 201-475-0344
Email: rcahanap@bioreference.com
-----Original Message-----
From: mehdi houshmand [mailto:med1985@gmail.com]
Sent: Wednesday, February 02, 2011 9:32 AM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Hi Roberto,
You can do 1 of 2 things, either a) place the font in the correct
folder or b) you can be explicit about the location of the font
(http://xmlgraphics.apache.org/fop/0.95/configuration.html#renderers).
I'd suggest that you go for the latter rather than the former as it
gives you better control over where the font is.
Hope that helps
Mehdi
On 2 February 2011 14:18, Eric Douglas <ed...@blockhouse.com> wrote:
> Obviously it means it can't find the font. auto-detect is usually not a
> good idea. It depends on the font file being found on the machine it's
> running on.
> What file contains that font triplet? Is that installed on the production
> machine? Obviously it's either not installed there or there's something
> different about the search path.
> ________________________________
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 9:12 AM
> To: fop-users@xmlgraphics.apache.org
> Subject: font missing warning
>
> Hello!
>
>
>
> We are getting this warning when we try to create a PDF:
>
>
>
> Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo notifyFontReplacement
>
> WARNING: Font 'Consolas,normal,400' not found. Substituting with
> 'any,normal,400'.
>
>
>
> Our environment - we have another program that creates the XML and XSL. We
> use FOP to create the PDF from these files.
>
>
>
> Some things to note about our problem:
>
> - If we have a simple XSL, then we don't get this error
>
> - We have two environments (TEST and PRODUCTION), it works OK in
> our TEST environment
>
> - We are using FOP 0.95
>
> - We use <auto-detect/> in the fop configuration file to detect the
> font.
>
>
>
> Does anybody know what could be causing this issue?
>
>
>
> Thank you!
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to BioReference
> Laboratories. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited and may be
> unlawful. If you received this in error, please contact the sender
> immediately and delete and destroy the communication and all of the
> attachments you have received and all copies thereof.
>
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
Re: font missing warning
Posted by mehdi houshmand <me...@gmail.com>.
Hi Roberto,
You can do 1 of 2 things, either a) place the font in the correct
folder or b) you can be explicit about the location of the font
(http://xmlgraphics.apache.org/fop/0.95/configuration.html#renderers).
I'd suggest that you go for the latter rather than the former as it
gives you better control over where the font is.
Hope that helps
Mehdi
On 2 February 2011 14:18, Eric Douglas <ed...@blockhouse.com> wrote:
> Obviously it means it can't find the font. auto-detect is usually not a
> good idea. It depends on the font file being found on the machine it's
> running on.
> What file contains that font triplet? Is that installed on the production
> machine? Obviously it's either not installed there or there's something
> different about the search path.
> ________________________________
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 9:12 AM
> To: fop-users@xmlgraphics.apache.org
> Subject: font missing warning
>
> Hello!
>
>
>
> We are getting this warning when we try to create a PDF:
>
>
>
> Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo notifyFontReplacement
>
> WARNING: Font 'Consolas,normal,400' not found. Substituting with
> 'any,normal,400'.
>
>
>
> Our environment – we have another program that creates the XML and XSL. We
> use FOP to create the PDF from these files.
>
>
>
> Some things to note about our problem:
>
> - If we have a simple XSL, then we don’t get this error
>
> - We have two environments (TEST and PRODUCTION), it works OK in
> our TEST environment
>
> - We are using FOP 0.95
>
> - We use <auto-detect/> in the fop configuration file to detect the
> font.
>
>
>
> Does anybody know what could be causing this issue?
>
>
>
> Thank you!
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to BioReference
> Laboratories. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited and may be
> unlawful. If you received this in error, please contact the sender
> immediately and delete and destroy the communication and all of the
> attachments you have received and all copies thereof.
>
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Ah true!
Yes. I will leave fop.bat alone and create another batch file referring to it? Maybe that will work.
I will see. Thank you Mehdi.
-----Original Message-----
From: mehdi houshmand [mailto:med1985@gmail.com]
Sent: Wednesday, February 02, 2011 3:05 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
I don't know if this is an option for you, but why don't you just
create another batch script that contains the arguments. That way you
can leave the working code working and configure another batch script.
Mehdi
On 2 February 2011 20:01, Roberto Cahanap <rc...@bioreference.com> wrote:
> Yes, but is there a way to place the -c conf\fop.xconf inside this batch file.
>
> Our software runs the FOP.BAT, I don't really know how this software tells it where the XSL and XML is located.
>
> I'm just wondering how I can hard code this inside the batch file.
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 3:01 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Those are arguments. The bat accepts arguments as a pass value. So
> it's just
>
> Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
> \temp\roberto\test2c.pdf -c conf\fop.xconf"
>
> -----Original Message-----
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 2:52 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> I'm getting somewhere...
>
> On the Test server, I renamed conf.xconf. When I tried to create the pdf
> from the Test server, I get this:
> WARNING: Font 'Consolas,normal,400' not found. Substituting with
> 'any,normal,400'
>
> But when I renamed it back to conf.xconf, I am still getting this error.
>
> I read in the docs that you can specify the config, so I did this:
>
> C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
> \temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
>
> It worked again.
>
> I did the same on the PRODUCTION server, adding the -c option at the
> end, it also worked.
>
> Now, I'm trying to figure out where to put this -c option in the FOP.BAT
> so that it can work within.
>
> Thanks again Eric and Jeremias.
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 2:43 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Yes.
> If you're using FOP you're running Java. Somewhere you have a file
> fop.jar.
> To compile the fonts into a jar you would need a Java editor (Eclipse,
> Netbeans).
> To use them as such you'd have to write your own Java code. That's the
> path I'm going.
> Fop doesn't provide an easy way to do that, but embedding them in a jar
> puts them in with the programs so using embedded code you can reference
> them directly.
> The custom jar has to be on the Java classpath so you don't have to
> worry about hardcoded font paths or auto detection.
> If you got it to work with the config file telling it where your fonts
> are I wouldn't worry about it.
> Other advantages to embedding the specific fonts you need in a jar
> 1) You can load custom fonts and get them to work on any system.
> 2) You don't need a config file.
> 3) The fonts go with the programs so you wouldn't have to worry about
> different machines having different versions of the same file.
> We actually had a problem years ago running reports in Courier font on
> client PCs which were running Windows 98 and for some reasons some PCs
> had a different version of font so the same report using a font file of
> the same name produced different output.
> If I'm testing a program on my PC or a test server I'd rather not rely
> on the test machine having the same file as the production server or
> another client machine unless It's a file I specifically put there.
>
>
> -----Original Message-----
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 2:08 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> "compile the fonts into a jar"...
>
> Yikes! That's foreign language to me, that sounds like java talk.
>
> Still testing and getting advice...
>
> :-)
>
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 1:48 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Remote debugging means assumptions or questions or both.
> I started by assuming this user like most is running from a command
> line.
> Finding the fonts correctly is a lot easier from embedded code.
> It's even easier if I can compile the fonts into a jar and reference
> them internally so they never have a path.
> The second easiest way is if you can reference them with a path relative
> to the path of the fop.jar.
>
> Users frequently expect remote debugging but unless you have remote
> access to view their machine instructions look like Step 1: Does your
> screen show this? If yes do this, else do that.
>
>
> -----Original Message-----
> From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
> Sent: Wednesday, February 02, 2011 1:35 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: Re: font missing warning
>
> Check the environment ("set" on Windows). Look for the "TEMP" entry.
> It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
> user.
>
> If it's not around, maybe the user under which FOP is running has no
> write access to the user directory or there is no user directory at all.
> I have no idea. I love remote debugging. ;-)
>
> On 02.02.2011 18:58:53 Roberto Cahanap wrote:
>> Hello Jeremias,
>>
>> Thank you for shaking my memory. Yes on the TEST server, we have a
> folder named .FOP that is in the USERACCOUNT's directory. Inside this is
> a file called fop-fonts.cache.
>>
>> There is no such folder on our Production server. Would you know why
> this is so?
>>
>> If this folder is not there, then where would it be looking for these
> "cached" fonts? If like you say "in the temp directory", where would
> that be on a Windows system?
>>
>> Thank you again.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to
> BioReference Laboratories. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this information
> by persons or entities other than the intended recipient is prohibited
> and may be unlawful. If you received this in error, please contact the
> sender immediately and delete and destroy the communication and all of
> the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to
> BioReference Laboratories. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this information
> by persons or entities other than the intended recipient is prohibited
> and may be unlawful. If you received this in error, please contact the
> sender immediately and delete and destroy the communication and all of
> the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
Re: font missing warning
Posted by mehdi houshmand <me...@gmail.com>.
I don't know if this is an option for you, but why don't you just
create another batch script that contains the arguments. That way you
can leave the working code working and configure another batch script.
Mehdi
On 2 February 2011 20:01, Roberto Cahanap <rc...@bioreference.com> wrote:
> Yes, but is there a way to place the -c conf\fop.xconf inside this batch file.
>
> Our software runs the FOP.BAT, I don't really know how this software tells it where the XSL and XML is located.
>
> I'm just wondering how I can hard code this inside the batch file.
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 3:01 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Those are arguments. The bat accepts arguments as a pass value. So
> it's just
>
> Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
> \temp\roberto\test2c.pdf -c conf\fop.xconf"
>
> -----Original Message-----
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 2:52 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> I'm getting somewhere...
>
> On the Test server, I renamed conf.xconf. When I tried to create the pdf
> from the Test server, I get this:
> WARNING: Font 'Consolas,normal,400' not found. Substituting with
> 'any,normal,400'
>
> But when I renamed it back to conf.xconf, I am still getting this error.
>
> I read in the docs that you can specify the config, so I did this:
>
> C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
> \temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
>
> It worked again.
>
> I did the same on the PRODUCTION server, adding the -c option at the
> end, it also worked.
>
> Now, I'm trying to figure out where to put this -c option in the FOP.BAT
> so that it can work within.
>
> Thanks again Eric and Jeremias.
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 2:43 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Yes.
> If you're using FOP you're running Java. Somewhere you have a file
> fop.jar.
> To compile the fonts into a jar you would need a Java editor (Eclipse,
> Netbeans).
> To use them as such you'd have to write your own Java code. That's the
> path I'm going.
> Fop doesn't provide an easy way to do that, but embedding them in a jar
> puts them in with the programs so using embedded code you can reference
> them directly.
> The custom jar has to be on the Java classpath so you don't have to
> worry about hardcoded font paths or auto detection.
> If you got it to work with the config file telling it where your fonts
> are I wouldn't worry about it.
> Other advantages to embedding the specific fonts you need in a jar
> 1) You can load custom fonts and get them to work on any system.
> 2) You don't need a config file.
> 3) The fonts go with the programs so you wouldn't have to worry about
> different machines having different versions of the same file.
> We actually had a problem years ago running reports in Courier font on
> client PCs which were running Windows 98 and for some reasons some PCs
> had a different version of font so the same report using a font file of
> the same name produced different output.
> If I'm testing a program on my PC or a test server I'd rather not rely
> on the test machine having the same file as the production server or
> another client machine unless It's a file I specifically put there.
>
>
> -----Original Message-----
> From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
> Sent: Wednesday, February 02, 2011 2:08 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> "compile the fonts into a jar"...
>
> Yikes! That's foreign language to me, that sounds like java talk.
>
> Still testing and getting advice...
>
> :-)
>
>
>
> -----Original Message-----
> From: Eric Douglas [mailto:edouglas@blockhouse.com]
> Sent: Wednesday, February 02, 2011 1:48 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: RE: font missing warning
>
> Remote debugging means assumptions or questions or both.
> I started by assuming this user like most is running from a command
> line.
> Finding the fonts correctly is a lot easier from embedded code.
> It's even easier if I can compile the fonts into a jar and reference
> them internally so they never have a path.
> The second easiest way is if you can reference them with a path relative
> to the path of the fop.jar.
>
> Users frequently expect remote debugging but unless you have remote
> access to view their machine instructions look like Step 1: Does your
> screen show this? If yes do this, else do that.
>
>
> -----Original Message-----
> From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
> Sent: Wednesday, February 02, 2011 1:35 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: Re: font missing warning
>
> Check the environment ("set" on Windows). Look for the "TEMP" entry.
> It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
> user.
>
> If it's not around, maybe the user under which FOP is running has no
> write access to the user directory or there is no user directory at all.
> I have no idea. I love remote debugging. ;-)
>
> On 02.02.2011 18:58:53 Roberto Cahanap wrote:
>> Hello Jeremias,
>>
>> Thank you for shaking my memory. Yes on the TEST server, we have a
> folder named .FOP that is in the USERACCOUNT's directory. Inside this is
> a file called fop-fonts.cache.
>>
>> There is no such folder on our Production server. Would you know why
> this is so?
>>
>> If this folder is not there, then where would it be looking for these
> "cached" fonts? If like you say "in the temp directory", where would
> that be on a Windows system?
>>
>> Thank you again.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to
> BioReference Laboratories. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this information
> by persons or entities other than the intended recipient is prohibited
> and may be unlawful. If you received this in error, please contact the
> sender immediately and delete and destroy the communication and all of
> the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is
> intended only for the person or entity to which it is addressed and may
> contain BioReference Laboratories proprietary information, which is
> privileged, confidential, or subject to copyright belonging to
> BioReference Laboratories. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this information
> by persons or entities other than the intended recipient is prohibited
> and may be unlawful. If you received this in error, please contact the
> sender immediately and delete and destroy the communication and all of
> the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
To everyone!
I emailed the software group that's responsible for calling FOP.BAT (shoutout for Intersystems Cache/Zen software!), and they responded that there's a variable that I can set that take the configuration file location.
I set this variable, and it now works!
Woohoo!!!
I can now go home and shovel from this North East (U.S.) winter storm.
Thank you again folks!
-Roberto
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 3:09 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
If you can modify the batch file and you can't modify the line which
calls the batch file just put the arguments into the batch file if you
want to hardcode them.
Just put your argument string in where it's accepting arguments. That
would be the line ending with %1.
Either that or put the Fop.bat statement as I described below (except
start with fop2.bat) into a new file named fop.bat and rename fop.bat.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 3:02 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes, but is there a way to place the -c conf\fop.xconf inside this batch
file.
Our software runs the FOP.BAT, I don't really know how this software
tells it where the XSL and XML is located.
I'm just wondering how I can hard code this inside the batch file.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 3:01 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Those are arguments. The bat accepts arguments as a pass value. So
it's just
Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
\temp\roberto\test2c.pdf -c conf\fop.xconf"
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:52 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
I'm getting somewhere...
On the Test server, I renamed conf.xconf. When I tried to create the pdf
from the Test server, I get this:
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'
But when I renamed it back to conf.xconf, I am still getting this error.
I read in the docs that you can specify the config, so I did this:
C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
\temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
It worked again.
I did the same on the PRODUCTION server, adding the -c option at the
end, it also worked.
Now, I'm trying to figure out where to put this -c option in the FOP.BAT
so that it can work within.
Thanks again Eric and Jeremias.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 2:43 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
If you can modify the batch file and you can't modify the line which
calls the batch file just put the arguments into the batch file if you
want to hardcode them.
Just put your argument string in where it's accepting arguments. That
would be the line ending with %1.
Either that or put the Fop.bat statement as I described below (except
start with fop2.bat) into a new file named fop.bat and rename fop.bat.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 3:02 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes, but is there a way to place the -c conf\fop.xconf inside this batch
file.
Our software runs the FOP.BAT, I don't really know how this software
tells it where the XSL and XML is located.
I'm just wondering how I can hard code this inside the batch file.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 3:01 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Those are arguments. The bat accepts arguments as a pass value. So
it's just
Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
\temp\roberto\test2c.pdf -c conf\fop.xconf"
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:52 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
I'm getting somewhere...
On the Test server, I renamed conf.xconf. When I tried to create the pdf
from the Test server, I get this:
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'
But when I renamed it back to conf.xconf, I am still getting this error.
I read in the docs that you can specify the config, so I did this:
C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
\temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
It worked again.
I did the same on the PRODUCTION server, adding the -c option at the
end, it also worked.
Now, I'm trying to figure out where to put this -c option in the FOP.BAT
so that it can work within.
Thanks again Eric and Jeremias.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 2:43 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Yes, but is there a way to place the -c conf\fop.xconf inside this batch file.
Our software runs the FOP.BAT, I don't really know how this software tells it where the XSL and XML is located.
I'm just wondering how I can hard code this inside the batch file.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 3:01 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Those are arguments. The bat accepts arguments as a pass value. So
it's just
Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
\temp\roberto\test2c.pdf -c conf\fop.xconf"
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:52 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
I'm getting somewhere...
On the Test server, I renamed conf.xconf. When I tried to create the pdf
from the Test server, I get this:
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'
But when I renamed it back to conf.xconf, I am still getting this error.
I read in the docs that you can specify the config, so I did this:
C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
\temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
It worked again.
I did the same on the PRODUCTION server, adding the -c option at the
end, it also worked.
Now, I'm trying to figure out where to put this -c option in the FOP.BAT
so that it can work within.
Thanks again Eric and Jeremias.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 2:43 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
Those are arguments. The bat accepts arguments as a pass value. So
it's just
Fop.bat "-xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf
\temp\roberto\test2c.pdf -c conf\fop.xconf"
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:52 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
I'm getting somewhere...
On the Test server, I renamed conf.xconf. When I tried to create the pdf
from the Test server, I get this:
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'
But when I renamed it back to conf.xconf, I am still getting this error.
I read in the docs that you can specify the config, so I did this:
C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml
\temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
It worked again.
I did the same on the PRODUCTION server, adding the -c option at the
end, it also worked.
Now, I'm trying to figure out where to put this -c option in the FOP.BAT
so that it can work within.
Thanks again Eric and Jeremias.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 2:43 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
I'm getting somewhere...
On the Test server, I renamed conf.xconf. When I tried to create the pdf from the Test server, I get this:
WARNING: Font 'Consolas,normal,400' not found. Substituting with 'any,normal,400'
But when I renamed it back to conf.xconf, I am still getting this error.
I read in the docs that you can specify the config, so I did this:
C:\Program Files\Apache\fop>fop -xsl \temp\roberto\test2.xsl -xml \temp\roberto\test2.xml -pdf \temp\roberto\test2c.pdf -c conf\fop.xconf
It worked again.
I did the same on the PRODUCTION server, adding the -c option at the end, it also worked.
Now, I'm trying to figure out where to put this -c option in the FOP.BAT so that it can work within.
Thanks again Eric and Jeremias.
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 2:43 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
Yes.
If you're using FOP you're running Java. Somewhere you have a file
fop.jar.
To compile the fonts into a jar you would need a Java editor (Eclipse,
Netbeans).
To use them as such you'd have to write your own Java code. That's the
path I'm going.
Fop doesn't provide an easy way to do that, but embedding them in a jar
puts them in with the programs so using embedded code you can reference
them directly.
The custom jar has to be on the Java classpath so you don't have to
worry about hardcoded font paths or auto detection.
If you got it to work with the config file telling it where your fonts
are I wouldn't worry about it.
Other advantages to embedding the specific fonts you need in a jar
1) You can load custom fonts and get them to work on any system.
2) You don't need a config file.
3) The fonts go with the programs so you wouldn't have to worry about
different machines having different versions of the same file.
We actually had a problem years ago running reports in Courier font on
client PCs which were running Windows 98 and for some reasons some PCs
had a different version of font so the same report using a font file of
the same name produced different output.
If I'm testing a program on my PC or a test server I'd rather not rely
on the test machine having the same file as the production server or
another client machine unless It's a file I specifically put there.
-----Original Message-----
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 2:08 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like Step 1: Does your
screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
"compile the fonts into a jar"...
Yikes! That's foreign language to me, that sounds like java talk.
Still testing and getting advice...
:-)
-----Original Message-----
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 1:48 PM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like
Step 1: Does your screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
Remote debugging means assumptions or questions or both.
I started by assuming this user like most is running from a command
line.
Finding the fonts correctly is a lot easier from embedded code.
It's even easier if I can compile the fonts into a jar and reference
them internally so they never have a path.
The second easiest way is if you can reference them with a path relative
to the path of the fop.jar.
Users frequently expect remote debugging but unless you have remote
access to view their machine instructions look like
Step 1: Does your screen show this? If yes do this, else do that.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my
user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a
folder named .FOP that is in the USERACCOUNT's directory. Inside this is
a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why
this is so?
>
> If this folder is not there, then where would it be looking for these
"cached" fonts? If like you say "in the temp directory", where would
that be on a Windows system?
>
> Thank you again.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Thanks for the help Jeremias.
I'm new to FOP, so I don't know the ins and outs of it. Hopefully by fixing this issue, I'll learn a little from it.
We are just running the FOP.BAT file to get our results, so like I said, I don't know really know what's going on.
Yes remote debugging is hard. Thanks for your suggestions.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 1:35 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a folder named .FOP that is in the USERACCOUNT's directory. Inside this is a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why this is so?
>
> If this folder is not there, then where would it be looking for these "cached" fonts? If like you say "in the temp directory", where would that be on a Windows system?
>
> Thank you again.
>
>
> -----Original Message-----
> From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
> Sent: Wednesday, February 02, 2011 12:22 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: Re: font missing warning
>
> Normally, FOP puts the "fop-fonts.cache" file in <user.home>/.fop. If
> that directory is not writable the cache file is put into the temp
> directory. It could indeed help to delete the cache file. If there was a
> problem loading a particular font, it can get flagged as invalid and
> won't be loaded again later.
>
> On 02.02.2011 16:52:05 Roberto Cahanap wrote:
> > I vaguely remember that we had a similar issue with our Test server
> > (it's working now on this Test server). To get it to work, I remembered
> > deleting the fop cache file, but I can't seem to find the location of
> > this cache file now. Help!
> <snip/>
>
>
> Jeremias Maerki
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
>
Jeremias Maerki
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
Re: font missing warning
Posted by Jeremias Maerki <de...@jeremias-maerki.ch>.
Check the environment ("set" on Windows). Look for the "TEMP" entry.
It's TEMP=C:\Users\Jeremias\AppData\Local\Temp on my machine for my user.
If it's not around, maybe the user under which FOP is running has no
write access to the user directory or there is no user directory at all.
I have no idea. I love remote debugging. ;-)
On 02.02.2011 18:58:53 Roberto Cahanap wrote:
> Hello Jeremias,
>
> Thank you for shaking my memory. Yes on the TEST server, we have a folder named .FOP that is in the USERACCOUNT's directory. Inside this is a file called fop-fonts.cache.
>
> There is no such folder on our Production server. Would you know why this is so?
>
> If this folder is not there, then where would it be looking for these "cached" fonts? If like you say "in the temp directory", where would that be on a Windows system?
>
> Thank you again.
>
>
> -----Original Message-----
> From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
> Sent: Wednesday, February 02, 2011 12:22 PM
> To: fop-users@xmlgraphics.apache.org
> Subject: Re: font missing warning
>
> Normally, FOP puts the "fop-fonts.cache" file in <user.home>/.fop. If
> that directory is not writable the cache file is put into the temp
> directory. It could indeed help to delete the cache file. If there was a
> problem loading a particular font, it can get flagged as invalid and
> won't be loaded again later.
>
> On 02.02.2011 16:52:05 Roberto Cahanap wrote:
> > I vaguely remember that we had a similar issue with our Test server
> > (it's working now on this Test server). To get it to work, I remembered
> > deleting the fop cache file, but I can't seem to find the location of
> > this cache file now. Help!
> <snip/>
>
>
> Jeremias Maerki
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
> For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
>
> The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
>
Jeremias Maerki
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Hello Jeremias,
Thank you for shaking my memory. Yes on the TEST server, we have a folder named .FOP that is in the USERACCOUNT's directory. Inside this is a file called fop-fonts.cache.
There is no such folder on our Production server. Would you know why this is so?
If this folder is not there, then where would it be looking for these "cached" fonts? If like you say "in the temp directory", where would that be on a Windows system?
Thank you again.
-----Original Message-----
From: Jeremias Maerki [mailto:dev@jeremias-maerki.ch]
Sent: Wednesday, February 02, 2011 12:22 PM
To: fop-users@xmlgraphics.apache.org
Subject: Re: font missing warning
Normally, FOP puts the "fop-fonts.cache" file in <user.home>/.fop. If
that directory is not writable the cache file is put into the temp
directory. It could indeed help to delete the cache file. If there was a
problem loading a particular font, it can get flagged as invalid and
won't be loaded again later.
On 02.02.2011 16:52:05 Roberto Cahanap wrote:
> I vaguely remember that we had a similar issue with our Test server
> (it's working now on this Test server). To get it to work, I remembered
> deleting the fop cache file, but I can't seem to find the location of
> this cache file now. Help!
<snip/>
Jeremias Maerki
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
Re: font missing warning
Posted by Jeremias Maerki <de...@jeremias-maerki.ch>.
Normally, FOP puts the "fop-fonts.cache" file in <user.home>/.fop. If
that directory is not writable the cache file is put into the temp
directory. It could indeed help to delete the cache file. If there was a
problem loading a particular font, it can get flagged as invalid and
won't be loaded again later.
On 02.02.2011 16:52:05 Roberto Cahanap wrote:
> I vaguely remember that we had a similar issue with our Test server
> (it's working now on this Test server). To get it to work, I remembered
> deleting the fop cache file, but I can't seem to find the location of
> this cache file now. Help!
<snip/>
Jeremias Maerki
---------------------------------------------------------------------
To unsubscribe, e-mail: fop-users-unsubscribe@xmlgraphics.apache.org
For additional commands, e-mail: fop-users-help@xmlgraphics.apache.org
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
I vaguely remember that we had a similar issue with our Test server (it's working now on this Test server). To get it to work, I remembered deleting the fop cache file, but I can't seem to find the location of this cache file now. Help!
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 10:49 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
If it's not working at all on the production server then if it is actually working on the test server that suggests the search path is wrong. Have you tried hardcoding the path?
If it's not actually working on the test server it may just not like your font. I don't recal if OpenType fonts are fully supported in FOP 0.95. Can you try 1.0, or test a different type of font?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 10:29 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
After doing some testing, the "simple" one was not working also. It also had that missing font warning. I had the output from our other software set it to HTML instead of routing it to FOP for pdf.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
I did this now, but still not the correct font:
<fonts>
<directory>h:\Windows\fonts</directory>
</fonts>
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 11:21 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
We're assuming it is correctly finding and using the font on the test server.
Have you tried hardcoding the path to the fonts on the production server instead of using auto-detect?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 11:16 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
Our Test server's fonts are located in the C: drive. The Production server's fonts are located in the H: drive (that's where Windows was installed).
How do I tell FOP that the fonts are located on the H: drive? Maybe that's the issue?
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 10:49 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
If it's not working at all on the production server then if it is actually working on the test server that suggests the search path is wrong. Have you tried hardcoding the path?
If it's not actually working on the test server it may just not like your font. I don't recal if OpenType fonts are fully supported in FOP 0.95. Can you try 1.0, or test a different type of font?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 10:29 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
After doing some testing, the "simple" one was not working also. It also had that missing font warning. I had the output from our other software set it to HTML instead of routing it to FOP for pdf.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
We're assuming it is correctly finding and using the font on the test
server.
Have you tried hardcoding the path to the fonts on the production server
instead of using auto-detect?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 11:16 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
Our Test server's fonts are located in the C: drive. The Production
server's fonts are located in the H: drive (that's where Windows was
installed).
How do I tell FOP that the fonts are located on the H: drive? Maybe
that's the issue?
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 10:49 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
If it's not working at all on the production server then if it is
actually working on the test server that suggests the search path is
wrong. Have you tried hardcoding the path?
If it's not actually working on the test server it may just not like
your font. I don't recal if OpenType fonts are fully supported in FOP
0.95. Can you try 1.0, or test a different type of font?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 10:29 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
After doing some testing, the "simple" one was not working also. It also
had that missing font warning. I had the output from our other software
set it to HTML instead of routing it to FOP for pdf.
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Eric,
Our Test server's fonts are located in the C: drive. The Production server's fonts are located in the H: drive (that's where Windows was installed).
How do I tell FOP that the fonts are located on the H: drive? Maybe that's the issue?
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 10:49 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
If it's not working at all on the production server then if it is actually working on the test server that suggests the search path is wrong. Have you tried hardcoding the path?
If it's not actually working on the test server it may just not like your font. I don't recal if OpenType fonts are fully supported in FOP 0.95. Can you try 1.0, or test a different type of font?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 10:29 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
After doing some testing, the "simple" one was not working also. It also had that missing font warning. I had the output from our other software set it to HTML instead of routing it to FOP for pdf.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
If it's not working at all on the production server then if it is
actually working on the test server that suggests the search path is
wrong. Have you tried hardcoding the path?
If it's not actually working on the test server it may just not like
your font. I don't recal if OpenType fonts are fully supported in FOP
0.95. Can you try 1.0, or test a different type of font?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 10:29 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Eric,
After doing some testing, the "simple" one was not working also. It also
had that missing font warning. I had the output from our other software
set it to HTML instead of routing it to FOP for pdf.
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Eric,
After doing some testing, the "simple" one was not working also. It also had that missing font warning. I had the output from our other software set it to HTML instead of routing it to FOP for pdf.
But here's a partial listing of the one that I'm interested in getting to work:
<xsl:template match="body" mode="table11" name="table8">
<fo:table-row>
<fo:table-cell>
<xsl:attribute name="font-family">'Consolas'</xsl:attribute>
<fo:block>
<fo:inline>
<xsl:if test="@linetype = "1"">
<fo:inline>
<xsl:attribute name="width">19cm</xsl:attribute>
<xsl:call-template name="clinical">
<xsl:with-param name="type" select="@linetype" />
I'm doing some more test to see what the issue is...
Roberto Cahanap
Developer, Reporting Department
Bio-Reference Laboratories, Inc.
Phone: 800-229-5227 x8499
Cell: 201-693-0132
Fax: 201-475-0344
Email: rcahanap@bioreference.com
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 10:04 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
That depends what you mean by simple versus not simple. It would be a lot easier to understand what you're talking about if you have one that works and one that doesn't work on the same machine,
Are they referencing the same fop config file?
Can you send a sample of each xslt or fo file?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:57 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Hello Eric,
What I don't understand is that a simple page does not get this error and finds the font.
The file is installed on the production machine (Windows Server 2003 Enterprise Edition), it's called CONSOLA.TTF (Consolas True Type).
I'm going to run a couple of experiments today to see what's up with this issue.
Roberto Cahanap
Developer, Reporting Department
Bio-Reference Laboratories, Inc.
Phone: 800-229-5227 x8499
Cell: 201-693-0132
Fax: 201-475-0344
Email: rcahanap@bioreference.com
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 9:19 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Obviously it means it can't find the font. auto-detect is usually not a good idea. It depends on the font file being found on the machine it's running on.
What file contains that font triplet? Is that installed on the production machine? Obviously it's either not installed there or there's something different about the search path.
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:12 AM
To: fop-users@xmlgraphics.apache.org
Subject: font missing warning
Hello!
We are getting this warning when we try to create a PDF:
Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo notifyFontReplacement
WARNING: Font 'Consolas,normal,400' not found. Substituting with 'any,normal,400'.
Our environment - we have another program that creates the XML and XSL. We use FOP to create the PDF from these files.
Some things to note about our problem:
- If we have a simple XSL, then we don't get this error
- We have two environments (TEST and PRODUCTION), it works OK in our TEST environment
- We are using FOP 0.95
- We use <auto-detect/> in the fop configuration file to detect the font.
Does anybody know what could be causing this issue?
Thank you!
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
That depends what you mean by simple versus not simple. It would be a
lot easier to understand what you're talking about if you have one that
works and one that doesn't work on the same machine,
Are they referencing the same fop config file?
Can you send a sample of each xslt or fo file?
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:57 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Hello Eric,
What I don't understand is that a simple page does not get this error
and finds the font.
The file is installed on the production machine (Windows Server 2003
Enterprise Edition), it's called CONSOLA.TTF (Consolas True Type).
I'm going to run a couple of experiments today to see what's up with
this issue.
Roberto Cahanap
Developer, Reporting Department
Bio-Reference Laboratories, Inc.
Phone: 800-229-5227 x8499
Cell: 201-693-0132
Fax: 201-475-0344
Email: rcahanap@bioreference.com
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 9:19 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Obviously it means it can't find the font. auto-detect is usually not a
good idea. It depends on the font file being found on the machine it's
running on.
What file contains that font triplet? Is that installed on the
production machine? Obviously it's either not installed there or
there's something different about the search path.
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:12 AM
To: fop-users@xmlgraphics.apache.org
Subject: font missing warning
Hello!
We are getting this warning when we try to create a PDF:
Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo
notifyFontReplacement
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'.
Our environment - we have another program that creates the XML and XSL.
We use FOP to create the PDF from these files.
Some things to note about our problem:
- If we have a simple XSL, then we don't get this error
- We have two environments (TEST and PRODUCTION), it works OK
in our TEST environment
- We are using FOP 0.95
- We use <auto-detect/> in the fop configuration file to detect
the font.
Does anybody know what could be causing this issue?
Thank you!
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Roberto Cahanap <rc...@BioReference.com>.
Hello Eric,
What I don't understand is that a simple page does not get this error and finds the font.
The file is installed on the production machine (Windows Server 2003 Enterprise Edition), it's called CONSOLA.TTF (Consolas True Type).
I'm going to run a couple of experiments today to see what's up with this issue.
Roberto Cahanap
Developer, Reporting Department
Bio-Reference Laboratories, Inc.
Phone: 800-229-5227 x8499
Cell: 201-693-0132
Fax: 201-475-0344
Email: rcahanap@bioreference.com
From: Eric Douglas [mailto:edouglas@blockhouse.com]
Sent: Wednesday, February 02, 2011 9:19 AM
To: fop-users@xmlgraphics.apache.org
Subject: RE: font missing warning
Obviously it means it can't find the font. auto-detect is usually not a good idea. It depends on the font file being found on the machine it's running on.
What file contains that font triplet? Is that installed on the production machine? Obviously it's either not installed there or there's something different about the search path.
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:12 AM
To: fop-users@xmlgraphics.apache.org
Subject: font missing warning
Hello!
We are getting this warning when we try to create a PDF:
Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo notifyFontReplacement
WARNING: Font 'Consolas,normal,400' not found. Substituting with 'any,normal,400'.
Our environment - we have another program that creates the XML and XSL. We use FOP to create the PDF from these files.
Some things to note about our problem:
- If we have a simple XSL, then we don't get this error
- We have two environments (TEST and PRODUCTION), it works OK in our TEST environment
- We are using FOP 0.95
- We use <auto-detect/> in the fop configuration file to detect the font.
Does anybody know what could be causing this issue?
Thank you!
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
The information transmitted in this email and any of its attachments is intended only for the person or entity to which it is addressed and may contain BioReference Laboratories proprietary information, which is privileged, confidential, or subject to copyright belonging to BioReference Laboratories. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this in error, please contact the sender immediately and delete and destroy the communication and all of the attachments you have received and all copies thereof.
RE: font missing warning
Posted by Eric Douglas <ed...@blockhouse.com>.
Obviously it means it can't find the font. auto-detect is usually not a
good idea. It depends on the font file being found on the machine it's
running on.
What file contains that font triplet? Is that installed on the
production machine? Obviously it's either not installed there or
there's something different about the search path.
________________________________
From: Roberto Cahanap [mailto:rcahanap@BioReference.com]
Sent: Wednesday, February 02, 2011 9:12 AM
To: fop-users@xmlgraphics.apache.org
Subject: font missing warning
Hello!
We are getting this warning when we try to create a PDF:
Feb 1, 2011 4:35:03 PM org.apache.fop.fonts.FontInfo
notifyFontReplacement
WARNING: Font 'Consolas,normal,400' not found. Substituting with
'any,normal,400'.
Our environment - we have another program that creates the XML and XSL.
We use FOP to create the PDF from these files.
Some things to note about our problem:
- If we have a simple XSL, then we don't get this error
- We have two environments (TEST and PRODUCTION), it works OK
in our TEST environment
- We are using FOP 0.95
- We use <auto-detect/> in the fop configuration file to detect
the font.
Does anybody know what could be causing this issue?
Thank you!
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may
contain BioReference Laboratories proprietary information, which is
privileged, confidential, or subject to copyright belonging to
BioReference Laboratories. Any review, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information
by persons or entities other than the intended recipient is prohibited
and may be unlawful. If you received this in error, please contact the
sender immediately and delete and destroy the communication and all of
the attachments you have received and all copies thereof.