You are viewing a plain text version of this content. The canonical link for it is here.
Posted to dev@ripple.apache.org by Gord Tanner <gt...@gmail.com> on 2013/10/21 03:38:16 UTC

Cordova 3.0 support merging into develop

Hey everyone,

I am feeling that the Cordova 3.0 support branch is stable enough so I am
merging it into develop.

We are probably getting close to being able to ship the npm package with
cordova 3.0 support.

I was just wondering what we need to do to prep for a true apache release?

I know there was some licensing issues with blackberries device skins.
 Rather then figure out all that stuff I can just remove them so it isn't
an issue.  At some point in the future someone can crop some new skins for
all the devices anyways.

Was it just the images that was holding up our releases?  I wouldn't mind
getting an official one out the door with Cordova 3.0 support.

Re: Cordova 3.0 support merging into develop

Posted by Brent Lintner <br...@gmail.com>.
Also (FWIW & FYI), regarding the need to:

jake build[hosted]

..before

npm install -g ../ripple-reo/

I started on making that not necessary, notably by moving any global
packages to the local node_modules folder (see
https://github.com/brentlintner/incubator-ripple/commit/b03a073bed6671922b250cb46a52cd4fd94842e6).
However, I never liked it, it made the prod size huge, and my thread about
it died.

Lately, I've had success by having a function like this in the Jakefile:

https://gist.github.com/brentlintner/3f3934179057cb73b9c7

A small process to follow, but that should ultimately allow "jake
build[hosted]" to be run post-install without requiring modules like jsDom
which don't exist in prod, and make "npm install" a heck of a lot simpler
and [extrinsically] easy to digest.

Just an FYI. I have intended to contribute this when I did some Ripple
work, if it was generally acceptable. :-)


On Wed, Oct 23, 2013 at 10:57 AM, Gord Tanner <gt...@gmail.com> wrote:

> When we deploy ripple to npm we factor out the devDependencies so it is
> kinda "pre-built".
>
>
> On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > First, yes, +1 to removing the extension.
> >
> > JR - I did try installing VS - but it didn't seem to help. Was a reboot
> > required perhaps?
> >
> > Also - are we saying this will be required for Windows folks to use this?
> > It isn't the end of the world, but if there is anyway we can ship it
> > pre-built - that would be nicer. (And if that is the plan - sorry for
> > mucking up the conversation.)
> >
> >
> >
> > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> >
> > > Ray, you probably don't have a c++ compiler on your Windows.  Quick fix
> > is
> > > to install visual studio express. This is well documented on node-gyp's
> > > readme.
> > >
> > > Gord, I agree about removing the chrome extension.
> > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
> > >
> > > > I am wondering if it is getting close to the time we take the chrome
> > > > extension out of the project (or at least disable building of it).
> > > >
> > > > The future of this project is in the hosted version.
> > > >
> > > > I know there is some issues with jsDom building on windows. We only
> use
> > > > jsDom for testing and I am thinking there might be a better option
> out
> > > > there for running our tests in node.
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > raymondcamden@gmail.com
> > > > >wrote:
> > > >
> > > > > So - on Windows, I was not able to run configure. Instead, I simply
> > ran
> > > > the
> > > > > commands inside. The first npm worked, the second, did not. Lots of
> > > > errors.
> > > > > My VM is off at the moment, but I can share later. JR, did you run
> > into
> > > > > issues there?
> > > > >
> > > > >
> > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > > > >
> > > > > > Yes still required. Nothing special for windows except just
> running
> > > > build
> > > > > > wont work since it tries to build the chrome extension first.
> Build
> > > > > hosted
> > > > > > only with jake build[hosted]
> > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > raymondcamden@gmail.com>
> > > > > > wrote:
> > > > > >
> > > > > > > Is configure/jake/etc still required? I did see your other
> email
> > to
> > > > me
> > > > > -
> > > > > > > just wondering if there *is* special steps for Windows folks if
> > it
> > > > will
> > > > > > be
> > > > > > > documented.
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > > > > >
> > > > > > > > Since my pull was accepted hosted builds but not the
> extension.
> > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > raymondcamden@gmail.com
> > > > >
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > > So dumb question - is it possible - and should it be
> > > documented -
> > > > > to
> > > > > > > run
> > > > > > > > > the build on Windows?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > raymondcamden@gmail.com
> > > > > > > > > >wrote:
> > > > > > > > >
> > > > > > > > > > I'm going to test it on a Windows VM I've got and see how
> > > well
> > > > it
> > > > > > > > works.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > gtanner@gmail.com>
> > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > >> Yes,
> > > > > > > > > >>
> > > > > > > > > >> merged in here:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > >> >wrote:
> > > > > > > > > >>
> > > > > > > > > >> > I believe there was an issue with Windows - JRowny
> had a
> > > > > patch -
> > > > > > > was
> > > > > > > > > >> that
> > > > > > > > > >> > taken in?
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > gtanner@gmail.com
> > > > > > >
> > > > > > > > > wrote:
> > > > > > > > > >> >
> > > > > > > > > >> > > Hey everyone,
> > > > > > > > > >> > >
> > > > > > > > > >> > > I am feeling that the Cordova 3.0 support branch is
> > > stable
> > > > > > > enough
> > > > > > > > so
> > > > > > > > > >> I am
> > > > > > > > > >> > > merging it into develop.
> > > > > > > > > >> > >
> > > > > > > > > >> > > We are probably getting close to being able to ship
> > the
> > > > npm
> > > > > > > > package
> > > > > > > > > >> with
> > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > >> > >
> > > > > > > > > >> > > I was just wondering what we need to do to prep for
> a
> > > true
> > > > > > > apache
> > > > > > > > > >> > release?
> > > > > > > > > >> > >
> > > > > > > > > >> > > I know there was some licensing issues with
> > blackberries
> > > > > > device
> > > > > > > > > skins.
> > > > > > > > > >> > >  Rather then figure out all that stuff I can just
> > remove
> > > > > them
> > > > > > so
> > > > > > > > it
> > > > > > > > > >> isn't
> > > > > > > > > >> > > an issue.  At some point in the future someone can
> > crop
> > > > some
> > > > > > new
> > > > > > > > > skins
> > > > > > > > > >> > for
> > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > >> > >
> > > > > > > > > >> > > Was it just the images that was holding up our
> > releases?
> > > >  I
> > > > > > > > wouldn't
> > > > > > > > > >> mind
> > > > > > > > > >> > > getting an official one out the door with Cordova
> 3.0
> > > > > support.
> > > > > > > > > >> > >
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> > --
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >> >
> > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >
> > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >
> > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > Twitter: cfjedimaster
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
Brent Lintner

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
So - I've done it. But how do I insure it isn't running the version I
installed earlier via npm. Do I need to uninstall npm globally? ripple
-version is giving 0.9.18.


On Wed, Oct 23, 2013 at 10:37 AM, Raymond Camden <ra...@gmail.com>wrote:

> ... I'm sorry. I may be slow, but adding the folder to my path and running
> (the path)\ripple is the same, is it not? I don't use Windows now, but did
> for years, and I never heard of the two being any different. Am I wrong?
>
>
> On Wed, Oct 23, 2013 at 10:35 AM, JR <jr...@gmail.com> wrote:
>
>> Add the bin to your path, then you can just use ripple. You can also just
>> execute ripple from the full path.. there should be a file in bin, just
>> not
>> an EXE.
>>
>>
>> On Wed, Oct 23, 2013 at 11:30 AM, Raymond Camden <raymondcamden@gmail.com
>> >wrote:
>>
>> > Hmm - then I'm confused. How exactly do I start it? Before that's what I
>> > used, bin\ripple. (On OSX that is.)
>> >
>> >
>> > On Wed, Oct 23, 2013 at 10:26 AM, JR <jr...@gmail.com> wrote:
>> >
>> > > You don't need a ripple exe, you need just the file that's in there.
>> but
>> > it
>> > > needs to be in your path for it to work in other folders.
>> > >
>> > >
>> > > On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <
>> > raymondcamden@gmail.com
>> > > >wrote:
>> > >
>> > > > IIn bin I do not have a ripple.exe.
>> > > >
>> > > >
>> > > > On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com>
>> > wrote:
>> > > >
>> > > > > All I know is that would install just enough to run the ripple
>> > command
>> > > > (and
>> > > > > not try to install jsDom, which would error out)
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > > > --
>> > > >
>> > >
>> >
>> ===========================================================================
>> > > > Raymond Camden, Adobe Developer Evangelist
>> > > >
>> > > > Email : raymondcamden@gmail.com
>> > > > Blog : www.raymondcamden.com
>> > > > Twitter: cfjedimaster
>> > > >
>> > >
>> > >
>> > >
>> > > --
>> > > Jonathan
>> > >
>> >
>> >
>> >
>> > --
>> >
>> ===========================================================================
>> > Raymond Camden, Adobe Developer Evangelist
>> >
>> > Email : raymondcamden@gmail.com
>> > Blog : www.raymondcamden.com
>> > Twitter: cfjedimaster
>> >
>>
>>
>>
>> --
>> Jonathan
>>
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
yes, it works the same way on windows. You just don't need an exe is all
I'm saying. Refering to something by it's full path is annoying, hence why
I like adding it to the window's path.

When installed via NPM -g, this is automatic because NPM puts a little
script in the node_modules folder which is already in the path.


On Wed, Oct 23, 2013 at 11:37 AM, Raymond Camden <ra...@gmail.com>wrote:

> ... I'm sorry. I may be slow, but adding the folder to my path and running
> (the path)\ripple is the same, is it not? I don't use Windows now, but did
> for years, and I never heard of the two being any different. Am I wrong?
>
>
> On Wed, Oct 23, 2013 at 10:35 AM, JR <jr...@gmail.com> wrote:
>
> > Add the bin to your path, then you can just use ripple. You can also just
> > execute ripple from the full path.. there should be a file in bin, just
> not
> > an EXE.
> >
> >
> > On Wed, Oct 23, 2013 at 11:30 AM, Raymond Camden <
> raymondcamden@gmail.com
> > >wrote:
> >
> > > Hmm - then I'm confused. How exactly do I start it? Before that's what
> I
> > > used, bin\ripple. (On OSX that is.)
> > >
> > >
> > > On Wed, Oct 23, 2013 at 10:26 AM, JR <jr...@gmail.com> wrote:
> > >
> > > > You don't need a ripple exe, you need just the file that's in there.
> > but
> > > it
> > > > needs to be in your path for it to work in other folders.
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <
> > > raymondcamden@gmail.com
> > > > >wrote:
> > > >
> > > > > IIn bin I do not have a ripple.exe.
> > > > >
> > > > >
> > > > > On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com>
> > > wrote:
> > > > >
> > > > > > All I know is that would install just enough to run the ripple
> > > command
> > > > > (and
> > > > > > not try to install jsDom, which would error out)
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Jonathan
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
> >
> >
> > --
> > Jonathan
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
Jonathan

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
... I'm sorry. I may be slow, but adding the folder to my path and running
(the path)\ripple is the same, is it not? I don't use Windows now, but did
for years, and I never heard of the two being any different. Am I wrong?


On Wed, Oct 23, 2013 at 10:35 AM, JR <jr...@gmail.com> wrote:

> Add the bin to your path, then you can just use ripple. You can also just
> execute ripple from the full path.. there should be a file in bin, just not
> an EXE.
>
>
> On Wed, Oct 23, 2013 at 11:30 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > Hmm - then I'm confused. How exactly do I start it? Before that's what I
> > used, bin\ripple. (On OSX that is.)
> >
> >
> > On Wed, Oct 23, 2013 at 10:26 AM, JR <jr...@gmail.com> wrote:
> >
> > > You don't need a ripple exe, you need just the file that's in there.
> but
> > it
> > > needs to be in your path for it to work in other folders.
> > >
> > >
> > > On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <
> > raymondcamden@gmail.com
> > > >wrote:
> > >
> > > > IIn bin I do not have a ripple.exe.
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com>
> > wrote:
> > > >
> > > > > All I know is that would install just enough to run the ripple
> > command
> > > > (and
> > > > > not try to install jsDom, which would error out)
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> > >
> > >
> > > --
> > > Jonathan
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>
>
>
> --
> Jonathan
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
Add the bin to your path, then you can just use ripple. You can also just
execute ripple from the full path.. there should be a file in bin, just not
an EXE.


On Wed, Oct 23, 2013 at 11:30 AM, Raymond Camden <ra...@gmail.com>wrote:

> Hmm - then I'm confused. How exactly do I start it? Before that's what I
> used, bin\ripple. (On OSX that is.)
>
>
> On Wed, Oct 23, 2013 at 10:26 AM, JR <jr...@gmail.com> wrote:
>
> > You don't need a ripple exe, you need just the file that's in there. but
> it
> > needs to be in your path for it to work in other folders.
> >
> >
> > On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <
> raymondcamden@gmail.com
> > >wrote:
> >
> > > IIn bin I do not have a ripple.exe.
> > >
> > >
> > > On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com>
> wrote:
> > >
> > > > All I know is that would install just enough to run the ripple
> command
> > > (and
> > > > not try to install jsDom, which would error out)
> > > >
> > > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
> >
> >
> > --
> > Jonathan
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
Jonathan

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Hmm - then I'm confused. How exactly do I start it? Before that's what I
used, bin\ripple. (On OSX that is.)


On Wed, Oct 23, 2013 at 10:26 AM, JR <jr...@gmail.com> wrote:

> You don't need a ripple exe, you need just the file that's in there. but it
> needs to be in your path for it to work in other folders.
>
>
> On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > IIn bin I do not have a ripple.exe.
> >
> >
> > On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com> wrote:
> >
> > > All I know is that would install just enough to run the ripple command
> > (and
> > > not try to install jsDom, which would error out)
> > >
> > >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>
>
>
> --
> Jonathan
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
You don't need a ripple exe, you need just the file that's in there. but it
needs to be in your path for it to work in other folders.


On Wed, Oct 23, 2013 at 11:24 AM, Raymond Camden <ra...@gmail.com>wrote:

> IIn bin I do not have a ripple.exe.
>
>
> On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com> wrote:
>
> > All I know is that would install just enough to run the ripple command
> (and
> > not try to install jsDom, which would error out)
> >
> >
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
Jonathan

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
IIn bin I do not have a ripple.exe.


On Wed, Oct 23, 2013 at 10:23 AM, Gord Tanner <gt...@gmail.com> wrote:

> All I know is that would install just enough to run the ripple command (and
> not try to install jsDom, which would error out)
>
>


-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Gord Tanner <gt...@gmail.com>.
All I know is that would install just enough to run the ripple command (and
not try to install jsDom, which would error out)


On Wed, Oct 23, 2013 at 11:16 AM, Raymond Camden <ra...@gmail.com>wrote:

> Heh, well, no, that was it. To be clear, I did the first npm line from
> configure last night. It ran, afaik, fine.
>
> I then did the line you said. The screenshot you saw is all I got. If it
> was supposed to do more, say Ok, etc, I didn't see that.
>
>
>
> On Wed, Oct 23, 2013 at 10:14 AM, JR <jr...@gmail.com> wrote:
>
> > well it should have actually installed things!
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Heh, well, no, that was it. To be clear, I did the first npm line from
configure last night. It ran, afaik, fine.

I then did the line you said. The screenshot you saw is all I got. If it
was supposed to do more, say Ok, etc, I didn't see that.



On Wed, Oct 23, 2013 at 10:14 AM, JR <jr...@gmail.com> wrote:

> well it should have actually installed things!
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
well it should have actually installed things!

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Nope. It ended there. Was that it?


On Wed, Oct 23, 2013 at 10:12 AM, JR <jr...@gmail.com> wrote:

> those are just warnings, totally normal. Any actual errors?
>
>
> On Wed, Oct 23, 2013 at 10:48 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > Returns this:
> >
> >
> >
> https://www.evernote.com/shard/s3/sh/274fdc3a-2dd3-4243-a3cc-034768045fec/0012816bcc41952a4a8764ef7786ec6f
> >
> >
> > On Wed, Oct 23, 2013 at 9:02 AM, Gord Tanner <gt...@gmail.com> wrote:
> >
> > > Try running this:
> > > npm install --production
> > >
> > >
> > > On Wed, Oct 23, 2013 at 9:59 AM, Raymond Camden <
> raymondcamden@gmail.com
> > > >wrote:
> > >
> > > > Cool. Well hell - I say do it. Make it so. Build. I'll test
> immediately
> > > > with Windows when you do. :)
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 8:57 AM, Gord Tanner <gt...@gmail.com>
> > wrote:
> > > >
> > > > > When we deploy ripple to npm we factor out the devDependencies so
> it
> > is
> > > > > kinda "pre-built".
> > > > >
> > > > >
> > > > > On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <
> > > raymondcamden@gmail.com
> > > > > >wrote:
> > > > >
> > > > > > First, yes, +1 to removing the extension.
> > > > > >
> > > > > > JR - I did try installing VS - but it didn't seem to help. Was a
> > > reboot
> > > > > > required perhaps?
> > > > > >
> > > > > > Also - are we saying this will be required for Windows folks to
> use
> > > > this?
> > > > > > It isn't the end of the world, but if there is anyway we can ship
> > it
> > > > > > pre-built - that would be nicer. (And if that is the plan - sorry
> > for
> > > > > > mucking up the conversation.)
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> > > > > >
> > > > > > > Ray, you probably don't have a c++ compiler on your Windows.
> >  Quick
> > > > fix
> > > > > > is
> > > > > > > to install visual studio express. This is well documented on
> > > > node-gyp's
> > > > > > > readme.
> > > > > > >
> > > > > > > Gord, I agree about removing the chrome extension.
> > > > > > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com>
> > wrote:
> > > > > > >
> > > > > > > > I am wondering if it is getting close to the time we take the
> > > > chrome
> > > > > > > > extension out of the project (or at least disable building of
> > > it).
> > > > > > > >
> > > > > > > > The future of this project is in the hosted version.
> > > > > > > >
> > > > > > > > I know there is some issues with jsDom building on windows.
> We
> > > only
> > > > > use
> > > > > > > > jsDom for testing and I am thinking there might be a better
> > > option
> > > > > out
> > > > > > > > there for running our tests in node.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > > > > > raymondcamden@gmail.com
> > > > > > > > >wrote:
> > > > > > > >
> > > > > > > > > So - on Windows, I was not able to run configure. Instead,
> I
> > > > simply
> > > > > > ran
> > > > > > > > the
> > > > > > > > > commands inside. The first npm worked, the second, did not.
> > > Lots
> > > > of
> > > > > > > > errors.
> > > > > > > > > My VM is off at the moment, but I can share later. JR, did
> > you
> > > > run
> > > > > > into
> > > > > > > > > issues there?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com>
> > wrote:
> > > > > > > > >
> > > > > > > > > > Yes still required. Nothing special for windows except
> just
> > > > > running
> > > > > > > > build
> > > > > > > > > > wont work since it tries to build the chrome extension
> > first.
> > > > > Build
> > > > > > > > > hosted
> > > > > > > > > > only with jake build[hosted]
> > > > > > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > > > > > raymondcamden@gmail.com>
> > > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > Is configure/jake/etc still required? I did see your
> > other
> > > > > email
> > > > > > to
> > > > > > > > me
> > > > > > > > > -
> > > > > > > > > > > just wondering if there *is* special steps for Windows
> > > folks
> > > > if
> > > > > > it
> > > > > > > > will
> > > > > > > > > > be
> > > > > > > > > > > documented.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com>
> > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > Since my pull was accepted hosted builds but not the
> > > > > extension.
> > > > > > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > > > > > raymondcamden@gmail.com
> > > > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > > So dumb question - is it possible - and should it
> be
> > > > > > > documented -
> > > > > > > > > to
> > > > > > > > > > > run
> > > > > > > > > > > > > the build on Windows?
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > > > >wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > > I'm going to test it on a Windows VM I've got and
> > see
> > > > how
> > > > > > > well
> > > > > > > > it
> > > > > > > > > > > > works.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > > > > > gtanner@gmail.com>
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >> Yes,
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >> merged in here:
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >>
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden
> <
> > > > > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > > > >> >wrote:
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >> > I believe there was an issue with Windows -
> > JRowny
> > > > > had a
> > > > > > > > > patch -
> > > > > > > > > > > was
> > > > > > > > > > > > > >> that
> > > > > > > > > > > > > >> > taken in?
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > > > > > gtanner@gmail.com
> > > > > > > > > > >
> > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> > > Hey everyone,
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> > > I am feeling that the Cordova 3.0 support
> > branch
> > > > is
> > > > > > > stable
> > > > > > > > > > > enough
> > > > > > > > > > > > so
> > > > > > > > > > > > > >> I am
> > > > > > > > > > > > > >> > > merging it into develop.
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> > > We are probably getting close to being able
> to
> > > > ship
> > > > > > the
> > > > > > > > npm
> > > > > > > > > > > > package
> > > > > > > > > > > > > >> with
> > > > > > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> > > I was just wondering what we need to do to
> > prep
> > > > for
> > > > > a
> > > > > > > true
> > > > > > > > > > > apache
> > > > > > > > > > > > > >> > release?
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> > > I know there was some licensing issues with
> > > > > > blackberries
> > > > > > > > > > device
> > > > > > > > > > > > > skins.
> > > > > > > > > > > > > >> > >  Rather then figure out all that stuff I can
> > > just
> > > > > > remove
> > > > > > > > > them
> > > > > > > > > > so
> > > > > > > > > > > > it
> > > > > > > > > > > > > >> isn't
> > > > > > > > > > > > > >> > > an issue.  At some point in the future
> someone
> > > can
> > > > > > crop
> > > > > > > > some
> > > > > > > > > > new
> > > > > > > > > > > > > skins
> > > > > > > > > > > > > >> > for
> > > > > > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> > > Was it just the images that was holding up
> our
> > > > > > releases?
> > > > > > > >  I
> > > > > > > > > > > > wouldn't
> > > > > > > > > > > > > >> mind
> > > > > > > > > > > > > >> > > getting an official one out the door with
> > > Cordova
> > > > > 3.0
> > > > > > > > > support.
> > > > > > > > > > > > > >> > >
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> > --
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >>
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > > > > > >> >
> > > > > > > > > > > > > >>
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > > >
> > > > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > >
> > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >
> > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > Twitter: cfjedimaster
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>
>
>
> --
> Jonathan
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
those are just warnings, totally normal. Any actual errors?


On Wed, Oct 23, 2013 at 10:48 AM, Raymond Camden <ra...@gmail.com>wrote:

> Returns this:
>
>
> https://www.evernote.com/shard/s3/sh/274fdc3a-2dd3-4243-a3cc-034768045fec/0012816bcc41952a4a8764ef7786ec6f
>
>
> On Wed, Oct 23, 2013 at 9:02 AM, Gord Tanner <gt...@gmail.com> wrote:
>
> > Try running this:
> > npm install --production
> >
> >
> > On Wed, Oct 23, 2013 at 9:59 AM, Raymond Camden <raymondcamden@gmail.com
> > >wrote:
> >
> > > Cool. Well hell - I say do it. Make it so. Build. I'll test immediately
> > > with Windows when you do. :)
> > >
> > >
> > > On Wed, Oct 23, 2013 at 8:57 AM, Gord Tanner <gt...@gmail.com>
> wrote:
> > >
> > > > When we deploy ripple to npm we factor out the devDependencies so it
> is
> > > > kinda "pre-built".
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <
> > raymondcamden@gmail.com
> > > > >wrote:
> > > >
> > > > > First, yes, +1 to removing the extension.
> > > > >
> > > > > JR - I did try installing VS - but it didn't seem to help. Was a
> > reboot
> > > > > required perhaps?
> > > > >
> > > > > Also - are we saying this will be required for Windows folks to use
> > > this?
> > > > > It isn't the end of the world, but if there is anyway we can ship
> it
> > > > > pre-built - that would be nicer. (And if that is the plan - sorry
> for
> > > > > mucking up the conversation.)
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> > > > >
> > > > > > Ray, you probably don't have a c++ compiler on your Windows.
>  Quick
> > > fix
> > > > > is
> > > > > > to install visual studio express. This is well documented on
> > > node-gyp's
> > > > > > readme.
> > > > > >
> > > > > > Gord, I agree about removing the chrome extension.
> > > > > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com>
> wrote:
> > > > > >
> > > > > > > I am wondering if it is getting close to the time we take the
> > > chrome
> > > > > > > extension out of the project (or at least disable building of
> > it).
> > > > > > >
> > > > > > > The future of this project is in the hosted version.
> > > > > > >
> > > > > > > I know there is some issues with jsDom building on windows. We
> > only
> > > > use
> > > > > > > jsDom for testing and I am thinking there might be a better
> > option
> > > > out
> > > > > > > there for running our tests in node.
> > > > > > >
> > > > > > >
> > > > > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > > > > raymondcamden@gmail.com
> > > > > > > >wrote:
> > > > > > >
> > > > > > > > So - on Windows, I was not able to run configure. Instead, I
> > > simply
> > > > > ran
> > > > > > > the
> > > > > > > > commands inside. The first npm worked, the second, did not.
> > Lots
> > > of
> > > > > > > errors.
> > > > > > > > My VM is off at the moment, but I can share later. JR, did
> you
> > > run
> > > > > into
> > > > > > > > issues there?
> > > > > > > >
> > > > > > > >
> > > > > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com>
> wrote:
> > > > > > > >
> > > > > > > > > Yes still required. Nothing special for windows except just
> > > > running
> > > > > > > build
> > > > > > > > > wont work since it tries to build the chrome extension
> first.
> > > > Build
> > > > > > > > hosted
> > > > > > > > > only with jake build[hosted]
> > > > > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > > > > raymondcamden@gmail.com>
> > > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > > Is configure/jake/etc still required? I did see your
> other
> > > > email
> > > > > to
> > > > > > > me
> > > > > > > > -
> > > > > > > > > > just wondering if there *is* special steps for Windows
> > folks
> > > if
> > > > > it
> > > > > > > will
> > > > > > > > > be
> > > > > > > > > > documented.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com>
> > > wrote:
> > > > > > > > > >
> > > > > > > > > > > Since my pull was accepted hosted builds but not the
> > > > extension.
> > > > > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > > > > raymondcamden@gmail.com
> > > > > > > >
> > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > So dumb question - is it possible - and should it be
> > > > > > documented -
> > > > > > > > to
> > > > > > > > > > run
> > > > > > > > > > > > the build on Windows?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > > >wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > > I'm going to test it on a Windows VM I've got and
> see
> > > how
> > > > > > well
> > > > > > > it
> > > > > > > > > > > works.
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > > > > gtanner@gmail.com>
> > > > > > > > > > > wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > >> Yes,
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> merged in here:
> > > > > > > > > > > > >>
> > > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > > > > >>
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > > >> >wrote:
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> > I believe there was an issue with Windows -
> JRowny
> > > > had a
> > > > > > > > patch -
> > > > > > > > > > was
> > > > > > > > > > > > >> that
> > > > > > > > > > > > >> > taken in?
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > > > > gtanner@gmail.com
> > > > > > > > > >
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > > Hey everyone,
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > I am feeling that the Cordova 3.0 support
> branch
> > > is
> > > > > > stable
> > > > > > > > > > enough
> > > > > > > > > > > so
> > > > > > > > > > > > >> I am
> > > > > > > > > > > > >> > > merging it into develop.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > We are probably getting close to being able to
> > > ship
> > > > > the
> > > > > > > npm
> > > > > > > > > > > package
> > > > > > > > > > > > >> with
> > > > > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > I was just wondering what we need to do to
> prep
> > > for
> > > > a
> > > > > > true
> > > > > > > > > > apache
> > > > > > > > > > > > >> > release?
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > I know there was some licensing issues with
> > > > > blackberries
> > > > > > > > > device
> > > > > > > > > > > > skins.
> > > > > > > > > > > > >> > >  Rather then figure out all that stuff I can
> > just
> > > > > remove
> > > > > > > > them
> > > > > > > > > so
> > > > > > > > > > > it
> > > > > > > > > > > > >> isn't
> > > > > > > > > > > > >> > > an issue.  At some point in the future someone
> > can
> > > > > crop
> > > > > > > some
> > > > > > > > > new
> > > > > > > > > > > > skins
> > > > > > > > > > > > >> > for
> > > > > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > Was it just the images that was holding up our
> > > > > releases?
> > > > > > >  I
> > > > > > > > > > > wouldn't
> > > > > > > > > > > > >> mind
> > > > > > > > > > > > >> > > getting an official one out the door with
> > Cordova
> > > > 3.0
> > > > > > > > support.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > --
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >>
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > > >
> > > > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > >
> > > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >
> > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >
> > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > Twitter: cfjedimaster
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
Jonathan

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Returns this:

https://www.evernote.com/shard/s3/sh/274fdc3a-2dd3-4243-a3cc-034768045fec/0012816bcc41952a4a8764ef7786ec6f


On Wed, Oct 23, 2013 at 9:02 AM, Gord Tanner <gt...@gmail.com> wrote:

> Try running this:
> npm install --production
>
>
> On Wed, Oct 23, 2013 at 9:59 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > Cool. Well hell - I say do it. Make it so. Build. I'll test immediately
> > with Windows when you do. :)
> >
> >
> > On Wed, Oct 23, 2013 at 8:57 AM, Gord Tanner <gt...@gmail.com> wrote:
> >
> > > When we deploy ripple to npm we factor out the devDependencies so it is
> > > kinda "pre-built".
> > >
> > >
> > > On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <
> raymondcamden@gmail.com
> > > >wrote:
> > >
> > > > First, yes, +1 to removing the extension.
> > > >
> > > > JR - I did try installing VS - but it didn't seem to help. Was a
> reboot
> > > > required perhaps?
> > > >
> > > > Also - are we saying this will be required for Windows folks to use
> > this?
> > > > It isn't the end of the world, but if there is anyway we can ship it
> > > > pre-built - that would be nicer. (And if that is the plan - sorry for
> > > > mucking up the conversation.)
> > > >
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> > > >
> > > > > Ray, you probably don't have a c++ compiler on your Windows.  Quick
> > fix
> > > > is
> > > > > to install visual studio express. This is well documented on
> > node-gyp's
> > > > > readme.
> > > > >
> > > > > Gord, I agree about removing the chrome extension.
> > > > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
> > > > >
> > > > > > I am wondering if it is getting close to the time we take the
> > chrome
> > > > > > extension out of the project (or at least disable building of
> it).
> > > > > >
> > > > > > The future of this project is in the hosted version.
> > > > > >
> > > > > > I know there is some issues with jsDom building on windows. We
> only
> > > use
> > > > > > jsDom for testing and I am thinking there might be a better
> option
> > > out
> > > > > > there for running our tests in node.
> > > > > >
> > > > > >
> > > > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > > > raymondcamden@gmail.com
> > > > > > >wrote:
> > > > > >
> > > > > > > So - on Windows, I was not able to run configure. Instead, I
> > simply
> > > > ran
> > > > > > the
> > > > > > > commands inside. The first npm worked, the second, did not.
> Lots
> > of
> > > > > > errors.
> > > > > > > My VM is off at the moment, but I can share later. JR, did you
> > run
> > > > into
> > > > > > > issues there?
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > > > > > >
> > > > > > > > Yes still required. Nothing special for windows except just
> > > running
> > > > > > build
> > > > > > > > wont work since it tries to build the chrome extension first.
> > > Build
> > > > > > > hosted
> > > > > > > > only with jake build[hosted]
> > > > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > > > raymondcamden@gmail.com>
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > > Is configure/jake/etc still required? I did see your other
> > > email
> > > > to
> > > > > > me
> > > > > > > -
> > > > > > > > > just wondering if there *is* special steps for Windows
> folks
> > if
> > > > it
> > > > > > will
> > > > > > > > be
> > > > > > > > > documented.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com>
> > wrote:
> > > > > > > > >
> > > > > > > > > > Since my pull was accepted hosted builds but not the
> > > extension.
> > > > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > > > raymondcamden@gmail.com
> > > > > > >
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > So dumb question - is it possible - and should it be
> > > > > documented -
> > > > > > > to
> > > > > > > > > run
> > > > > > > > > > > the build on Windows?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > >wrote:
> > > > > > > > > > >
> > > > > > > > > > > > I'm going to test it on a Windows VM I've got and see
> > how
> > > > > well
> > > > > > it
> > > > > > > > > > works.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > > > gtanner@gmail.com>
> > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >> Yes,
> > > > > > > > > > > >>
> > > > > > > > > > > >> merged in here:
> > > > > > > > > > > >>
> > > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > > > >>
> > > > > > > > > > > >>
> > > > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > > >> >wrote:
> > > > > > > > > > > >>
> > > > > > > > > > > >> > I believe there was an issue with Windows - JRowny
> > > had a
> > > > > > > patch -
> > > > > > > > > was
> > > > > > > > > > > >> that
> > > > > > > > > > > >> > taken in?
> > > > > > > > > > > >> >
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > > > gtanner@gmail.com
> > > > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > > Hey everyone,
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > I am feeling that the Cordova 3.0 support branch
> > is
> > > > > stable
> > > > > > > > > enough
> > > > > > > > > > so
> > > > > > > > > > > >> I am
> > > > > > > > > > > >> > > merging it into develop.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > We are probably getting close to being able to
> > ship
> > > > the
> > > > > > npm
> > > > > > > > > > package
> > > > > > > > > > > >> with
> > > > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > I was just wondering what we need to do to prep
> > for
> > > a
> > > > > true
> > > > > > > > > apache
> > > > > > > > > > > >> > release?
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > I know there was some licensing issues with
> > > > blackberries
> > > > > > > > device
> > > > > > > > > > > skins.
> > > > > > > > > > > >> > >  Rather then figure out all that stuff I can
> just
> > > > remove
> > > > > > > them
> > > > > > > > so
> > > > > > > > > > it
> > > > > > > > > > > >> isn't
> > > > > > > > > > > >> > > an issue.  At some point in the future someone
> can
> > > > crop
> > > > > > some
> > > > > > > > new
> > > > > > > > > > > skins
> > > > > > > > > > > >> > for
> > > > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > Was it just the images that was holding up our
> > > > releases?
> > > > > >  I
> > > > > > > > > > wouldn't
> > > > > > > > > > > >> mind
> > > > > > > > > > > >> > > getting an official one out the door with
> Cordova
> > > 3.0
> > > > > > > support.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> >
> > > > > > > > > > > >> >
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > --
> > > > > > > > > > > >> >
> > > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > > > >> >
> > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > > >
> > > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > >
> > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >
> > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > Twitter: cfjedimaster
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Gord Tanner <gt...@gmail.com>.
Try running this:
npm install --production


On Wed, Oct 23, 2013 at 9:59 AM, Raymond Camden <ra...@gmail.com>wrote:

> Cool. Well hell - I say do it. Make it so. Build. I'll test immediately
> with Windows when you do. :)
>
>
> On Wed, Oct 23, 2013 at 8:57 AM, Gord Tanner <gt...@gmail.com> wrote:
>
> > When we deploy ripple to npm we factor out the devDependencies so it is
> > kinda "pre-built".
> >
> >
> > On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <raymondcamden@gmail.com
> > >wrote:
> >
> > > First, yes, +1 to removing the extension.
> > >
> > > JR - I did try installing VS - but it didn't seem to help. Was a reboot
> > > required perhaps?
> > >
> > > Also - are we saying this will be required for Windows folks to use
> this?
> > > It isn't the end of the world, but if there is anyway we can ship it
> > > pre-built - that would be nicer. (And if that is the plan - sorry for
> > > mucking up the conversation.)
> > >
> > >
> > >
> > > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> > >
> > > > Ray, you probably don't have a c++ compiler on your Windows.  Quick
> fix
> > > is
> > > > to install visual studio express. This is well documented on
> node-gyp's
> > > > readme.
> > > >
> > > > Gord, I agree about removing the chrome extension.
> > > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
> > > >
> > > > > I am wondering if it is getting close to the time we take the
> chrome
> > > > > extension out of the project (or at least disable building of it).
> > > > >
> > > > > The future of this project is in the hosted version.
> > > > >
> > > > > I know there is some issues with jsDom building on windows. We only
> > use
> > > > > jsDom for testing and I am thinking there might be a better option
> > out
> > > > > there for running our tests in node.
> > > > >
> > > > >
> > > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > > raymondcamden@gmail.com
> > > > > >wrote:
> > > > >
> > > > > > So - on Windows, I was not able to run configure. Instead, I
> simply
> > > ran
> > > > > the
> > > > > > commands inside. The first npm worked, the second, did not. Lots
> of
> > > > > errors.
> > > > > > My VM is off at the moment, but I can share later. JR, did you
> run
> > > into
> > > > > > issues there?
> > > > > >
> > > > > >
> > > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > > > > >
> > > > > > > Yes still required. Nothing special for windows except just
> > running
> > > > > build
> > > > > > > wont work since it tries to build the chrome extension first.
> > Build
> > > > > > hosted
> > > > > > > only with jake build[hosted]
> > > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > > raymondcamden@gmail.com>
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Is configure/jake/etc still required? I did see your other
> > email
> > > to
> > > > > me
> > > > > > -
> > > > > > > > just wondering if there *is* special steps for Windows folks
> if
> > > it
> > > > > will
> > > > > > > be
> > > > > > > > documented.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com>
> wrote:
> > > > > > > >
> > > > > > > > > Since my pull was accepted hosted builds but not the
> > extension.
> > > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > > raymondcamden@gmail.com
> > > > > >
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > > So dumb question - is it possible - and should it be
> > > > documented -
> > > > > > to
> > > > > > > > run
> > > > > > > > > > the build on Windows?
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > >wrote:
> > > > > > > > > >
> > > > > > > > > > > I'm going to test it on a Windows VM I've got and see
> how
> > > > well
> > > > > it
> > > > > > > > > works.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > > gtanner@gmail.com>
> > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > >> Yes,
> > > > > > > > > > >>
> > > > > > > > > > >> merged in here:
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > > >> >wrote:
> > > > > > > > > > >>
> > > > > > > > > > >> > I believe there was an issue with Windows - JRowny
> > had a
> > > > > > patch -
> > > > > > > > was
> > > > > > > > > > >> that
> > > > > > > > > > >> > taken in?
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > > gtanner@gmail.com
> > > > > > > >
> > > > > > > > > > wrote:
> > > > > > > > > > >> >
> > > > > > > > > > >> > > Hey everyone,
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > I am feeling that the Cordova 3.0 support branch
> is
> > > > stable
> > > > > > > > enough
> > > > > > > > > so
> > > > > > > > > > >> I am
> > > > > > > > > > >> > > merging it into develop.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > We are probably getting close to being able to
> ship
> > > the
> > > > > npm
> > > > > > > > > package
> > > > > > > > > > >> with
> > > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > I was just wondering what we need to do to prep
> for
> > a
> > > > true
> > > > > > > > apache
> > > > > > > > > > >> > release?
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > I know there was some licensing issues with
> > > blackberries
> > > > > > > device
> > > > > > > > > > skins.
> > > > > > > > > > >> > >  Rather then figure out all that stuff I can just
> > > remove
> > > > > > them
> > > > > > > so
> > > > > > > > > it
> > > > > > > > > > >> isn't
> > > > > > > > > > >> > > an issue.  At some point in the future someone can
> > > crop
> > > > > some
> > > > > > > new
> > > > > > > > > > skins
> > > > > > > > > > >> > for
> > > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Was it just the images that was holding up our
> > > releases?
> > > > >  I
> > > > > > > > > wouldn't
> > > > > > > > > > >> mind
> > > > > > > > > > >> > > getting an official one out the door with Cordova
> > 3.0
> > > > > > support.
> > > > > > > > > > >> > >
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> > --
> > > > > > > > > > >> >
> > > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > >> >
> > > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > > >> >
> > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > > >
> > > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >
> > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >
> > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > Twitter: cfjedimaster
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Cool. Well hell - I say do it. Make it so. Build. I'll test immediately
with Windows when you do. :)


On Wed, Oct 23, 2013 at 8:57 AM, Gord Tanner <gt...@gmail.com> wrote:

> When we deploy ripple to npm we factor out the devDependencies so it is
> kinda "pre-built".
>
>
> On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > First, yes, +1 to removing the extension.
> >
> > JR - I did try installing VS - but it didn't seem to help. Was a reboot
> > required perhaps?
> >
> > Also - are we saying this will be required for Windows folks to use this?
> > It isn't the end of the world, but if there is anyway we can ship it
> > pre-built - that would be nicer. (And if that is the plan - sorry for
> > mucking up the conversation.)
> >
> >
> >
> > On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
> >
> > > Ray, you probably don't have a c++ compiler on your Windows.  Quick fix
> > is
> > > to install visual studio express. This is well documented on node-gyp's
> > > readme.
> > >
> > > Gord, I agree about removing the chrome extension.
> > > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
> > >
> > > > I am wondering if it is getting close to the time we take the chrome
> > > > extension out of the project (or at least disable building of it).
> > > >
> > > > The future of this project is in the hosted version.
> > > >
> > > > I know there is some issues with jsDom building on windows. We only
> use
> > > > jsDom for testing and I am thinking there might be a better option
> out
> > > > there for running our tests in node.
> > > >
> > > >
> > > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> > raymondcamden@gmail.com
> > > > >wrote:
> > > >
> > > > > So - on Windows, I was not able to run configure. Instead, I simply
> > ran
> > > > the
> > > > > commands inside. The first npm worked, the second, did not. Lots of
> > > > errors.
> > > > > My VM is off at the moment, but I can share later. JR, did you run
> > into
> > > > > issues there?
> > > > >
> > > > >
> > > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > > > >
> > > > > > Yes still required. Nothing special for windows except just
> running
> > > > build
> > > > > > wont work since it tries to build the chrome extension first.
> Build
> > > > > hosted
> > > > > > only with jake build[hosted]
> > > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> > raymondcamden@gmail.com>
> > > > > > wrote:
> > > > > >
> > > > > > > Is configure/jake/etc still required? I did see your other
> email
> > to
> > > > me
> > > > > -
> > > > > > > just wondering if there *is* special steps for Windows folks if
> > it
> > > > will
> > > > > > be
> > > > > > > documented.
> > > > > > >
> > > > > > >
> > > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > > > > >
> > > > > > > > Since my pull was accepted hosted builds but not the
> extension.
> > > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > > raymondcamden@gmail.com
> > > > >
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > > So dumb question - is it possible - and should it be
> > > documented -
> > > > > to
> > > > > > > run
> > > > > > > > > the build on Windows?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > > raymondcamden@gmail.com
> > > > > > > > > >wrote:
> > > > > > > > >
> > > > > > > > > > I'm going to test it on a Windows VM I've got and see how
> > > well
> > > > it
> > > > > > > > works.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > > gtanner@gmail.com>
> > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > >> Yes,
> > > > > > > > > >>
> > > > > > > > > >> merged in here:
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > > raymondcamden@gmail.com
> > > > > > > > > >> >wrote:
> > > > > > > > > >>
> > > > > > > > > >> > I believe there was an issue with Windows - JRowny
> had a
> > > > > patch -
> > > > > > > was
> > > > > > > > > >> that
> > > > > > > > > >> > taken in?
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > > gtanner@gmail.com
> > > > > > >
> > > > > > > > > wrote:
> > > > > > > > > >> >
> > > > > > > > > >> > > Hey everyone,
> > > > > > > > > >> > >
> > > > > > > > > >> > > I am feeling that the Cordova 3.0 support branch is
> > > stable
> > > > > > > enough
> > > > > > > > so
> > > > > > > > > >> I am
> > > > > > > > > >> > > merging it into develop.
> > > > > > > > > >> > >
> > > > > > > > > >> > > We are probably getting close to being able to ship
> > the
> > > > npm
> > > > > > > > package
> > > > > > > > > >> with
> > > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > > >> > >
> > > > > > > > > >> > > I was just wondering what we need to do to prep for
> a
> > > true
> > > > > > > apache
> > > > > > > > > >> > release?
> > > > > > > > > >> > >
> > > > > > > > > >> > > I know there was some licensing issues with
> > blackberries
> > > > > > device
> > > > > > > > > skins.
> > > > > > > > > >> > >  Rather then figure out all that stuff I can just
> > remove
> > > > > them
> > > > > > so
> > > > > > > > it
> > > > > > > > > >> isn't
> > > > > > > > > >> > > an issue.  At some point in the future someone can
> > crop
> > > > some
> > > > > > new
> > > > > > > > > skins
> > > > > > > > > >> > for
> > > > > > > > > >> > > all the devices anyways.
> > > > > > > > > >> > >
> > > > > > > > > >> > > Was it just the images that was holding up our
> > releases?
> > > >  I
> > > > > > > > wouldn't
> > > > > > > > > >> mind
> > > > > > > > > >> > > getting an official one out the door with Cordova
> 3.0
> > > > > support.
> > > > > > > > > >> > >
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> >
> > > > > > > > > >> > --
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >> >
> > > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > > >
> > > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > > Twitter: cfjedimaster
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >
> > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > Twitter: cfjedimaster
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Gord Tanner <gt...@gmail.com>.
When we deploy ripple to npm we factor out the devDependencies so it is
kinda "pre-built".


On Wed, Oct 23, 2013 at 9:49 AM, Raymond Camden <ra...@gmail.com>wrote:

> First, yes, +1 to removing the extension.
>
> JR - I did try installing VS - but it didn't seem to help. Was a reboot
> required perhaps?
>
> Also - are we saying this will be required for Windows folks to use this?
> It isn't the end of the world, but if there is anyway we can ship it
> pre-built - that would be nicer. (And if that is the plan - sorry for
> mucking up the conversation.)
>
>
>
> On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:
>
> > Ray, you probably don't have a c++ compiler on your Windows.  Quick fix
> is
> > to install visual studio express. This is well documented on node-gyp's
> > readme.
> >
> > Gord, I agree about removing the chrome extension.
> > On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
> >
> > > I am wondering if it is getting close to the time we take the chrome
> > > extension out of the project (or at least disable building of it).
> > >
> > > The future of this project is in the hosted version.
> > >
> > > I know there is some issues with jsDom building on windows. We only use
> > > jsDom for testing and I am thinking there might be a better option out
> > > there for running our tests in node.
> > >
> > >
> > > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <
> raymondcamden@gmail.com
> > > >wrote:
> > >
> > > > So - on Windows, I was not able to run configure. Instead, I simply
> ran
> > > the
> > > > commands inside. The first npm worked, the second, did not. Lots of
> > > errors.
> > > > My VM is off at the moment, but I can share later. JR, did you run
> into
> > > > issues there?
> > > >
> > > >
> > > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > > >
> > > > > Yes still required. Nothing special for windows except just running
> > > build
> > > > > wont work since it tries to build the chrome extension first. Build
> > > > hosted
> > > > > only with jake build[hosted]
> > > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <
> raymondcamden@gmail.com>
> > > > > wrote:
> > > > >
> > > > > > Is configure/jake/etc still required? I did see your other email
> to
> > > me
> > > > -
> > > > > > just wondering if there *is* special steps for Windows folks if
> it
> > > will
> > > > > be
> > > > > > documented.
> > > > > >
> > > > > >
> > > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > > > >
> > > > > > > Since my pull was accepted hosted builds but not the extension.
> > > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> > raymondcamden@gmail.com
> > > >
> > > > > > wrote:
> > > > > > >
> > > > > > > > So dumb question - is it possible - and should it be
> > documented -
> > > > to
> > > > > > run
> > > > > > > > the build on Windows?
> > > > > > > >
> > > > > > > >
> > > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > > raymondcamden@gmail.com
> > > > > > > > >wrote:
> > > > > > > >
> > > > > > > > > I'm going to test it on a Windows VM I've got and see how
> > well
> > > it
> > > > > > > works.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > > gtanner@gmail.com>
> > > > > > > wrote:
> > > > > > > > >
> > > > > > > > >> Yes,
> > > > > > > > >>
> > > > > > > > >> merged in here:
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > > raymondcamden@gmail.com
> > > > > > > > >> >wrote:
> > > > > > > > >>
> > > > > > > > >> > I believe there was an issue with Windows - JRowny had a
> > > > patch -
> > > > > > was
> > > > > > > > >> that
> > > > > > > > >> > taken in?
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > > gtanner@gmail.com
> > > > > >
> > > > > > > > wrote:
> > > > > > > > >> >
> > > > > > > > >> > > Hey everyone,
> > > > > > > > >> > >
> > > > > > > > >> > > I am feeling that the Cordova 3.0 support branch is
> > stable
> > > > > > enough
> > > > > > > so
> > > > > > > > >> I am
> > > > > > > > >> > > merging it into develop.
> > > > > > > > >> > >
> > > > > > > > >> > > We are probably getting close to being able to ship
> the
> > > npm
> > > > > > > package
> > > > > > > > >> with
> > > > > > > > >> > > cordova 3.0 support.
> > > > > > > > >> > >
> > > > > > > > >> > > I was just wondering what we need to do to prep for a
> > true
> > > > > > apache
> > > > > > > > >> > release?
> > > > > > > > >> > >
> > > > > > > > >> > > I know there was some licensing issues with
> blackberries
> > > > > device
> > > > > > > > skins.
> > > > > > > > >> > >  Rather then figure out all that stuff I can just
> remove
> > > > them
> > > > > so
> > > > > > > it
> > > > > > > > >> isn't
> > > > > > > > >> > > an issue.  At some point in the future someone can
> crop
> > > some
> > > > > new
> > > > > > > > skins
> > > > > > > > >> > for
> > > > > > > > >> > > all the devices anyways.
> > > > > > > > >> > >
> > > > > > > > >> > > Was it just the images that was holding up our
> releases?
> > >  I
> > > > > > > wouldn't
> > > > > > > > >> mind
> > > > > > > > >> > > getting an official one out the door with Cordova 3.0
> > > > support.
> > > > > > > > >> > >
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> > --
> > > > > > > > >> >
> > > > > > > > >>
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >> >
> > > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > > >> > Twitter: cfjedimaster
> > > > > > > > >> >
> > > > > > > > >>
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > > >
> > > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > > Twitter: cfjedimaster
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >
> > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > Twitter: cfjedimaster
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
First, yes, +1 to removing the extension.

JR - I did try installing VS - but it didn't seem to help. Was a reboot
required perhaps?

Also - are we saying this will be required for Windows folks to use this?
It isn't the end of the world, but if there is anyway we can ship it
pre-built - that would be nicer. (And if that is the plan - sorry for
mucking up the conversation.)



On Wed, Oct 23, 2013 at 7:44 AM, JR <jr...@gmail.com> wrote:

> Ray, you probably don't have a c++ compiler on your Windows.  Quick fix is
> to install visual studio express. This is well documented on node-gyp's
> readme.
>
> Gord, I agree about removing the chrome extension.
> On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:
>
> > I am wondering if it is getting close to the time we take the chrome
> > extension out of the project (or at least disable building of it).
> >
> > The future of this project is in the hosted version.
> >
> > I know there is some issues with jsDom building on windows. We only use
> > jsDom for testing and I am thinking there might be a better option out
> > there for running our tests in node.
> >
> >
> > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <raymondcamden@gmail.com
> > >wrote:
> >
> > > So - on Windows, I was not able to run configure. Instead, I simply ran
> > the
> > > commands inside. The first npm worked, the second, did not. Lots of
> > errors.
> > > My VM is off at the moment, but I can share later. JR, did you run into
> > > issues there?
> > >
> > >
> > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > >
> > > > Yes still required. Nothing special for windows except just running
> > build
> > > > wont work since it tries to build the chrome extension first. Build
> > > hosted
> > > > only with jake build[hosted]
> > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> > > > wrote:
> > > >
> > > > > Is configure/jake/etc still required? I did see your other email to
> > me
> > > -
> > > > > just wondering if there *is* special steps for Windows folks if it
> > will
> > > > be
> > > > > documented.
> > > > >
> > > > >
> > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > > >
> > > > > > Since my pull was accepted hosted builds but not the extension.
> > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> raymondcamden@gmail.com
> > >
> > > > > wrote:
> > > > > >
> > > > > > > So dumb question - is it possible - and should it be
> documented -
> > > to
> > > > > run
> > > > > > > the build on Windows?
> > > > > > >
> > > > > > >
> > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > raymondcamden@gmail.com
> > > > > > > >wrote:
> > > > > > >
> > > > > > > > I'm going to test it on a Windows VM I've got and see how
> well
> > it
> > > > > > works.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > gtanner@gmail.com>
> > > > > > wrote:
> > > > > > > >
> > > > > > > >> Yes,
> > > > > > > >>
> > > > > > > >> merged in here:
> > > > > > > >>
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > raymondcamden@gmail.com
> > > > > > > >> >wrote:
> > > > > > > >>
> > > > > > > >> > I believe there was an issue with Windows - JRowny had a
> > > patch -
> > > > > was
> > > > > > > >> that
> > > > > > > >> > taken in?
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > gtanner@gmail.com
> > > > >
> > > > > > > wrote:
> > > > > > > >> >
> > > > > > > >> > > Hey everyone,
> > > > > > > >> > >
> > > > > > > >> > > I am feeling that the Cordova 3.0 support branch is
> stable
> > > > > enough
> > > > > > so
> > > > > > > >> I am
> > > > > > > >> > > merging it into develop.
> > > > > > > >> > >
> > > > > > > >> > > We are probably getting close to being able to ship the
> > npm
> > > > > > package
> > > > > > > >> with
> > > > > > > >> > > cordova 3.0 support.
> > > > > > > >> > >
> > > > > > > >> > > I was just wondering what we need to do to prep for a
> true
> > > > > apache
> > > > > > > >> > release?
> > > > > > > >> > >
> > > > > > > >> > > I know there was some licensing issues with blackberries
> > > > device
> > > > > > > skins.
> > > > > > > >> > >  Rather then figure out all that stuff I can just remove
> > > them
> > > > so
> > > > > > it
> > > > > > > >> isn't
> > > > > > > >> > > an issue.  At some point in the future someone can crop
> > some
> > > > new
> > > > > > > skins
> > > > > > > >> > for
> > > > > > > >> > > all the devices anyways.
> > > > > > > >> > >
> > > > > > > >> > > Was it just the images that was holding up our releases?
> >  I
> > > > > > wouldn't
> > > > > > > >> mind
> > > > > > > >> > > getting an official one out the door with Cordova 3.0
> > > support.
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >> >
> > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > >> > Twitter: cfjedimaster
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >
> > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > Twitter: cfjedimaster
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
Ray, you probably don't have a c++ compiler on your Windows.  Quick fix is
to install visual studio express. This is well documented on node-gyp's
readme.

Gord, I agree about removing the chrome extension.
On Oct 23, 2013 8:16 AM, "Gord Tanner" <gt...@gmail.com> wrote:

> I am wondering if it is getting close to the time we take the chrome
> extension out of the project (or at least disable building of it).
>
> The future of this project is in the hosted version.
>
> I know there is some issues with jsDom building on windows. We only use
> jsDom for testing and I am thinking there might be a better option out
> there for running our tests in node.
>
>
> On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > So - on Windows, I was not able to run configure. Instead, I simply ran
> the
> > commands inside. The first npm worked, the second, did not. Lots of
> errors.
> > My VM is off at the moment, but I can share later. JR, did you run into
> > issues there?
> >
> >
> > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> >
> > > Yes still required. Nothing special for windows except just running
> build
> > > wont work since it tries to build the chrome extension first. Build
> > hosted
> > > only with jake build[hosted]
> > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> > > wrote:
> > >
> > > > Is configure/jake/etc still required? I did see your other email to
> me
> > -
> > > > just wondering if there *is* special steps for Windows folks if it
> will
> > > be
> > > > documented.
> > > >
> > > >
> > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > >
> > > > > Since my pull was accepted hosted builds but not the extension.
> > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <raymondcamden@gmail.com
> >
> > > > wrote:
> > > > >
> > > > > > So dumb question - is it possible - and should it be documented -
> > to
> > > > run
> > > > > > the build on Windows?
> > > > > >
> > > > > >
> > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > raymondcamden@gmail.com
> > > > > > >wrote:
> > > > > >
> > > > > > > I'm going to test it on a Windows VM I've got and see how well
> it
> > > > > works.
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> gtanner@gmail.com>
> > > > > wrote:
> > > > > > >
> > > > > > >> Yes,
> > > > > > >>
> > > > > > >> merged in here:
> > > > > > >>
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > >>
> > > > > > >>
> > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > raymondcamden@gmail.com
> > > > > > >> >wrote:
> > > > > > >>
> > > > > > >> > I believe there was an issue with Windows - JRowny had a
> > patch -
> > > > was
> > > > > > >> that
> > > > > > >> > taken in?
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > gtanner@gmail.com
> > > >
> > > > > > wrote:
> > > > > > >> >
> > > > > > >> > > Hey everyone,
> > > > > > >> > >
> > > > > > >> > > I am feeling that the Cordova 3.0 support branch is stable
> > > > enough
> > > > > so
> > > > > > >> I am
> > > > > > >> > > merging it into develop.
> > > > > > >> > >
> > > > > > >> > > We are probably getting close to being able to ship the
> npm
> > > > > package
> > > > > > >> with
> > > > > > >> > > cordova 3.0 support.
> > > > > > >> > >
> > > > > > >> > > I was just wondering what we need to do to prep for a true
> > > > apache
> > > > > > >> > release?
> > > > > > >> > >
> > > > > > >> > > I know there was some licensing issues with blackberries
> > > device
> > > > > > skins.
> > > > > > >> > >  Rather then figure out all that stuff I can just remove
> > them
> > > so
> > > > > it
> > > > > > >> isn't
> > > > > > >> > > an issue.  At some point in the future someone can crop
> some
> > > new
> > > > > > skins
> > > > > > >> > for
> > > > > > >> > > all the devices anyways.
> > > > > > >> > >
> > > > > > >> > > Was it just the images that was holding up our releases?
>  I
> > > > > wouldn't
> > > > > > >> mind
> > > > > > >> > > getting an official one out the door with Cordova 3.0
> > support.
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > >> >
> > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > >> > Blog : www.raymondcamden.com
> > > > > > >> > Twitter: cfjedimaster
> > > > > > >> >
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Sorry - lazy reply-er here. ;)


On Sun, Oct 27, 2013 at 12:52 PM, Brent Lintner <br...@gmail.com>wrote:

> Ah, my bad. You replied quoting my reply (last), so I assumed so.
> On Oct 27, 2013 2:39 PM, "Raymond Camden" <ra...@gmail.com> wrote:
>
> Yeah I meant Gord - see the beginning of this thread. :)
>
>
>

Re: Cordova 3.0 support merging into develop

Posted by Brent Lintner <br...@gmail.com>.
Ah, my bad. You replied quoting my reply (last), so I assumed so.
On Oct 27, 2013 2:39 PM, "Raymond Camden" <ra...@gmail.com> wrote:

Yeah I meant Gord - see the beginning of this thread. :)


On Sun, Oct 27, 2013 at 12:29 PM, Brent Lintner <brent.lintner@gmail.com
>wrote:

> Sorry Raymond. I'm not sure. Ripple is on the furthest of my "back
burners"
> :-(. I seem to recall Gord (?) may have recently started getting the ball
> rolling again with that, but I could be wrong.
>
> FWIW, There are some Jira issues related to release that need to be
> completed, as well (ex Apache RAT
> tool<https://issues.apache.org/jira/browse/RIPPLE-6>).
> And there are some threads around in the archives that mention what else
we
> still need to do (mainly, ASF oriented stuff I recall).
>
> On Sun, Oct 27, 2013 at 2:00 PM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > So where there a 'true' release yet? :)
> >
> >
> --
> Brent Lintner
>



--
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Yeah I meant Gord - see the beginning of this thread. :)


On Sun, Oct 27, 2013 at 12:29 PM, Brent Lintner <br...@gmail.com>wrote:

> Sorry Raymond. I'm not sure. Ripple is on the furthest of my "back burners"
> :-(. I seem to recall Gord (?) may have recently started getting the ball
> rolling again with that, but I could be wrong.
>
> FWIW, There are some Jira issues related to release that need to be
> completed, as well (ex Apache RAT
> tool<https://issues.apache.org/jira/browse/RIPPLE-6>).
> And there are some threads around in the archives that mention what else we
> still need to do (mainly, ASF oriented stuff I recall).
>
> On Sun, Oct 27, 2013 at 2:00 PM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > So where there a 'true' release yet? :)
> >
> >
> --
> Brent Lintner
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Brent Lintner <br...@gmail.com>.
Sorry Raymond. I'm not sure. Ripple is on the furthest of my "back burners"
:-(. I seem to recall Gord (?) may have recently started getting the ball
rolling again with that, but I could be wrong.

FWIW, There are some Jira issues related to release that need to be
completed, as well (ex Apache RAT
tool<https://issues.apache.org/jira/browse/RIPPLE-6>).
And there are some threads around in the archives that mention what else we
still need to do (mainly, ASF oriented stuff I recall).

On Sun, Oct 27, 2013 at 2:00 PM, Raymond Camden <ra...@gmail.com>wrote:

> So where there a 'true' release yet? :)
>
>
-- 
Brent Lintner

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
So where there a 'true' release yet? :)


On Sun, Oct 27, 2013 at 11:54 AM, Brent Lintner <br...@gmail.com>wrote:

> +1 to removing the extension.
>
> I think doing so will dramatically simplify the project, which will make it
> easier for new/current users to contribute and digest it in general. :-D
>
> My two cents. :-)
>
>
> On Wed, Oct 23, 2013 at 9:15 AM, Gord Tanner <gt...@gmail.com> wrote:
>
> > I am wondering if it is getting close to the time we take the chrome
> > extension out of the project (or at least disable building of it).
> >
> > The future of this project is in the hosted version.
> >
> > I know there is some issues with jsDom building on windows. We only use
> > jsDom for testing and I am thinking there might be a better option out
> > there for running our tests in node.
> >
> >
> > On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <raymondcamden@gmail.com
> > >wrote:
> >
> > > So - on Windows, I was not able to run configure. Instead, I simply ran
> > the
> > > commands inside. The first npm worked, the second, did not. Lots of
> > errors.
> > > My VM is off at the moment, but I can share later. JR, did you run into
> > > issues there?
> > >
> > >
> > > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> > >
> > > > Yes still required. Nothing special for windows except just running
> > build
> > > > wont work since it tries to build the chrome extension first. Build
> > > hosted
> > > > only with jake build[hosted]
> > > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> > > > wrote:
> > > >
> > > > > Is configure/jake/etc still required? I did see your other email to
> > me
> > > -
> > > > > just wondering if there *is* special steps for Windows folks if it
> > will
> > > > be
> > > > > documented.
> > > > >
> > > > >
> > > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > > >
> > > > > > Since my pull was accepted hosted builds but not the extension.
> > > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <
> raymondcamden@gmail.com
> > >
> > > > > wrote:
> > > > > >
> > > > > > > So dumb question - is it possible - and should it be
> documented -
> > > to
> > > > > run
> > > > > > > the build on Windows?
> > > > > > >
> > > > > > >
> > > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > > raymondcamden@gmail.com
> > > > > > > >wrote:
> > > > > > >
> > > > > > > > I'm going to test it on a Windows VM I've got and see how
> well
> > it
> > > > > > works.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> > gtanner@gmail.com>
> > > > > > wrote:
> > > > > > > >
> > > > > > > >> Yes,
> > > > > > > >>
> > > > > > > >> merged in here:
> > > > > > > >>
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > > raymondcamden@gmail.com
> > > > > > > >> >wrote:
> > > > > > > >>
> > > > > > > >> > I believe there was an issue with Windows - JRowny had a
> > > patch -
> > > > > was
> > > > > > > >> that
> > > > > > > >> > taken in?
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > > gtanner@gmail.com
> > > > >
> > > > > > > wrote:
> > > > > > > >> >
> > > > > > > >> > > Hey everyone,
> > > > > > > >> > >
> > > > > > > >> > > I am feeling that the Cordova 3.0 support branch is
> stable
> > > > > enough
> > > > > > so
> > > > > > > >> I am
> > > > > > > >> > > merging it into develop.
> > > > > > > >> > >
> > > > > > > >> > > We are probably getting close to being able to ship the
> > npm
> > > > > > package
> > > > > > > >> with
> > > > > > > >> > > cordova 3.0 support.
> > > > > > > >> > >
> > > > > > > >> > > I was just wondering what we need to do to prep for a
> true
> > > > > apache
> > > > > > > >> > release?
> > > > > > > >> > >
> > > > > > > >> > > I know there was some licensing issues with blackberries
> > > > device
> > > > > > > skins.
> > > > > > > >> > >  Rather then figure out all that stuff I can just remove
> > > them
> > > > so
> > > > > > it
> > > > > > > >> isn't
> > > > > > > >> > > an issue.  At some point in the future someone can crop
> > some
> > > > new
> > > > > > > skins
> > > > > > > >> > for
> > > > > > > >> > > all the devices anyways.
> > > > > > > >> > >
> > > > > > > >> > > Was it just the images that was holding up our releases?
> >  I
> > > > > > wouldn't
> > > > > > > >> mind
> > > > > > > >> > > getting an official one out the door with Cordova 3.0
> > > support.
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> >
> > > > > > > >>
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >> >
> > > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > > >> > Blog : www.raymondcamden.com
> > > > > > > >> > Twitter: cfjedimaster
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > > >
> > > > > > > > Email : raymondcamden@gmail.com
> > > > > > > > Blog : www.raymondcamden.com
> > > > > > > > Twitter: cfjedimaster
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>
>
>
> --
> Brent Lintner
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Brent Lintner <br...@gmail.com>.
+1 to removing the extension.

I think doing so will dramatically simplify the project, which will make it
easier for new/current users to contribute and digest it in general. :-D

My two cents. :-)


On Wed, Oct 23, 2013 at 9:15 AM, Gord Tanner <gt...@gmail.com> wrote:

> I am wondering if it is getting close to the time we take the chrome
> extension out of the project (or at least disable building of it).
>
> The future of this project is in the hosted version.
>
> I know there is some issues with jsDom building on windows. We only use
> jsDom for testing and I am thinking there might be a better option out
> there for running our tests in node.
>
>
> On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > So - on Windows, I was not able to run configure. Instead, I simply ran
> the
> > commands inside. The first npm worked, the second, did not. Lots of
> errors.
> > My VM is off at the moment, but I can share later. JR, did you run into
> > issues there?
> >
> >
> > On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
> >
> > > Yes still required. Nothing special for windows except just running
> build
> > > wont work since it tries to build the chrome extension first. Build
> > hosted
> > > only with jake build[hosted]
> > > On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> > > wrote:
> > >
> > > > Is configure/jake/etc still required? I did see your other email to
> me
> > -
> > > > just wondering if there *is* special steps for Windows folks if it
> will
> > > be
> > > > documented.
> > > >
> > > >
> > > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > > >
> > > > > Since my pull was accepted hosted builds but not the extension.
> > > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <raymondcamden@gmail.com
> >
> > > > wrote:
> > > > >
> > > > > > So dumb question - is it possible - and should it be documented -
> > to
> > > > run
> > > > > > the build on Windows?
> > > > > >
> > > > > >
> > > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > > raymondcamden@gmail.com
> > > > > > >wrote:
> > > > > >
> > > > > > > I'm going to test it on a Windows VM I've got and see how well
> it
> > > > > works.
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <
> gtanner@gmail.com>
> > > > > wrote:
> > > > > > >
> > > > > > >> Yes,
> > > > > > >>
> > > > > > >> merged in here:
> > > > > > >>
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > > >>
> > > > > > >>
> > > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > > raymondcamden@gmail.com
> > > > > > >> >wrote:
> > > > > > >>
> > > > > > >> > I believe there was an issue with Windows - JRowny had a
> > patch -
> > > > was
> > > > > > >> that
> > > > > > >> > taken in?
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> > gtanner@gmail.com
> > > >
> > > > > > wrote:
> > > > > > >> >
> > > > > > >> > > Hey everyone,
> > > > > > >> > >
> > > > > > >> > > I am feeling that the Cordova 3.0 support branch is stable
> > > > enough
> > > > > so
> > > > > > >> I am
> > > > > > >> > > merging it into develop.
> > > > > > >> > >
> > > > > > >> > > We are probably getting close to being able to ship the
> npm
> > > > > package
> > > > > > >> with
> > > > > > >> > > cordova 3.0 support.
> > > > > > >> > >
> > > > > > >> > > I was just wondering what we need to do to prep for a true
> > > > apache
> > > > > > >> > release?
> > > > > > >> > >
> > > > > > >> > > I know there was some licensing issues with blackberries
> > > device
> > > > > > skins.
> > > > > > >> > >  Rather then figure out all that stuff I can just remove
> > them
> > > so
> > > > > it
> > > > > > >> isn't
> > > > > > >> > > an issue.  At some point in the future someone can crop
> some
> > > new
> > > > > > skins
> > > > > > >> > for
> > > > > > >> > > all the devices anyways.
> > > > > > >> > >
> > > > > > >> > > Was it just the images that was holding up our releases?
>  I
> > > > > wouldn't
> > > > > > >> mind
> > > > > > >> > > getting an official one out the door with Cordova 3.0
> > support.
> > > > > > >> > >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> >
> > > > > > >> > --
> > > > > > >> >
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > > >> >
> > > > > > >> > Email : raymondcamden@gmail.com
> > > > > > >> > Blog : www.raymondcamden.com
> > > > > > >> > Twitter: cfjedimaster
> > > > > > >> >
> > > > > > >>
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > > >
> > > > > > > Email : raymondcamden@gmail.com
> > > > > > > Blog : www.raymondcamden.com
> > > > > > > Twitter: cfjedimaster
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
Brent Lintner

Re: Cordova 3.0 support merging into develop

Posted by Gord Tanner <gt...@gmail.com>.
I am wondering if it is getting close to the time we take the chrome
extension out of the project (or at least disable building of it).

The future of this project is in the hosted version.

I know there is some issues with jsDom building on windows. We only use
jsDom for testing and I am thinking there might be a better option out
there for running our tests in node.


On Wed, Oct 23, 2013 at 6:11 AM, Raymond Camden <ra...@gmail.com>wrote:

> So - on Windows, I was not able to run configure. Instead, I simply ran the
> commands inside. The first npm worked, the second, did not. Lots of errors.
> My VM is off at the moment, but I can share later. JR, did you run into
> issues there?
>
>
> On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:
>
> > Yes still required. Nothing special for windows except just running build
> > wont work since it tries to build the chrome extension first. Build
> hosted
> > only with jake build[hosted]
> > On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> > wrote:
> >
> > > Is configure/jake/etc still required? I did see your other email to me
> -
> > > just wondering if there *is* special steps for Windows folks if it will
> > be
> > > documented.
> > >
> > >
> > > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> > >
> > > > Since my pull was accepted hosted builds but not the extension.
> > > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <ra...@gmail.com>
> > > wrote:
> > > >
> > > > > So dumb question - is it possible - and should it be documented -
> to
> > > run
> > > > > the build on Windows?
> > > > >
> > > > >
> > > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > > raymondcamden@gmail.com
> > > > > >wrote:
> > > > >
> > > > > > I'm going to test it on a Windows VM I've got and see how well it
> > > > works.
> > > > > >
> > > > > >
> > > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com>
> > > > wrote:
> > > > > >
> > > > > >> Yes,
> > > > > >>
> > > > > >> merged in here:
> > > > > >>
> > > > > >>
> > > > >
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > > >>
> > > > > >>
> > > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > > raymondcamden@gmail.com
> > > > > >> >wrote:
> > > > > >>
> > > > > >> > I believe there was an issue with Windows - JRowny had a
> patch -
> > > was
> > > > > >> that
> > > > > >> > taken in?
> > > > > >> >
> > > > > >> >
> > > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <
> gtanner@gmail.com
> > >
> > > > > wrote:
> > > > > >> >
> > > > > >> > > Hey everyone,
> > > > > >> > >
> > > > > >> > > I am feeling that the Cordova 3.0 support branch is stable
> > > enough
> > > > so
> > > > > >> I am
> > > > > >> > > merging it into develop.
> > > > > >> > >
> > > > > >> > > We are probably getting close to being able to ship the npm
> > > > package
> > > > > >> with
> > > > > >> > > cordova 3.0 support.
> > > > > >> > >
> > > > > >> > > I was just wondering what we need to do to prep for a true
> > > apache
> > > > > >> > release?
> > > > > >> > >
> > > > > >> > > I know there was some licensing issues with blackberries
> > device
> > > > > skins.
> > > > > >> > >  Rather then figure out all that stuff I can just remove
> them
> > so
> > > > it
> > > > > >> isn't
> > > > > >> > > an issue.  At some point in the future someone can crop some
> > new
> > > > > skins
> > > > > >> > for
> > > > > >> > > all the devices anyways.
> > > > > >> > >
> > > > > >> > > Was it just the images that was holding up our releases?  I
> > > > wouldn't
> > > > > >> mind
> > > > > >> > > getting an official one out the door with Cordova 3.0
> support.
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > > >> >
> > > > > >> > Email : raymondcamden@gmail.com
> > > > > >> > Blog : www.raymondcamden.com
> > > > > >> > Twitter: cfjedimaster
> > > > > >> >
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > Raymond Camden, Adobe Developer Evangelist
> > > > > >
> > > > > > Email : raymondcamden@gmail.com
> > > > > > Blog : www.raymondcamden.com
> > > > > > Twitter: cfjedimaster
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
So - on Windows, I was not able to run configure. Instead, I simply ran the
commands inside. The first npm worked, the second, did not. Lots of errors.
My VM is off at the moment, but I can share later. JR, did you run into
issues there?


On Tue, Oct 22, 2013 at 9:57 PM, JR <jr...@gmail.com> wrote:

> Yes still required. Nothing special for windows except just running build
> wont work since it tries to build the chrome extension first. Build hosted
> only with jake build[hosted]
> On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com>
> wrote:
>
> > Is configure/jake/etc still required? I did see your other email to me -
> > just wondering if there *is* special steps for Windows folks if it will
> be
> > documented.
> >
> >
> > On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
> >
> > > Since my pull was accepted hosted builds but not the extension.
> > > On Oct 22, 2013 9:37 PM, "Raymond Camden" <ra...@gmail.com>
> > wrote:
> > >
> > > > So dumb question - is it possible - and should it be documented - to
> > run
> > > > the build on Windows?
> > > >
> > > >
> > > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> > raymondcamden@gmail.com
> > > > >wrote:
> > > >
> > > > > I'm going to test it on a Windows VM I've got and see how well it
> > > works.
> > > > >
> > > > >
> > > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com>
> > > wrote:
> > > > >
> > > > >> Yes,
> > > > >>
> > > > >> merged in here:
> > > > >>
> > > > >>
> > > >
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > > >>
> > > > >>
> > > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > > raymondcamden@gmail.com
> > > > >> >wrote:
> > > > >>
> > > > >> > I believe there was an issue with Windows - JRowny had a patch -
> > was
> > > > >> that
> > > > >> > taken in?
> > > > >> >
> > > > >> >
> > > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gtanner@gmail.com
> >
> > > > wrote:
> > > > >> >
> > > > >> > > Hey everyone,
> > > > >> > >
> > > > >> > > I am feeling that the Cordova 3.0 support branch is stable
> > enough
> > > so
> > > > >> I am
> > > > >> > > merging it into develop.
> > > > >> > >
> > > > >> > > We are probably getting close to being able to ship the npm
> > > package
> > > > >> with
> > > > >> > > cordova 3.0 support.
> > > > >> > >
> > > > >> > > I was just wondering what we need to do to prep for a true
> > apache
> > > > >> > release?
> > > > >> > >
> > > > >> > > I know there was some licensing issues with blackberries
> device
> > > > skins.
> > > > >> > >  Rather then figure out all that stuff I can just remove them
> so
> > > it
> > > > >> isn't
> > > > >> > > an issue.  At some point in the future someone can crop some
> new
> > > > skins
> > > > >> > for
> > > > >> > > all the devices anyways.
> > > > >> > >
> > > > >> > > Was it just the images that was holding up our releases?  I
> > > wouldn't
> > > > >> mind
> > > > >> > > getting an official one out the door with Cordova 3.0 support.
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> >
> > > > >>
> > > >
> > >
> >
> ===========================================================================
> > > > >> > Raymond Camden, Adobe Developer Evangelist
> > > > >> >
> > > > >> > Email : raymondcamden@gmail.com
> > > > >> > Blog : www.raymondcamden.com
> > > > >> > Twitter: cfjedimaster
> > > > >> >
> > > > >>
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > Raymond Camden, Adobe Developer Evangelist
> > > > >
> > > > > Email : raymondcamden@gmail.com
> > > > > Blog : www.raymondcamden.com
> > > > > Twitter: cfjedimaster
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
Yes still required. Nothing special for windows except just running build
wont work since it tries to build the chrome extension first. Build hosted
only with jake build[hosted]
On Oct 22, 2013 10:44 PM, "Raymond Camden" <ra...@gmail.com> wrote:

> Is configure/jake/etc still required? I did see your other email to me -
> just wondering if there *is* special steps for Windows folks if it will be
> documented.
>
>
> On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:
>
> > Since my pull was accepted hosted builds but not the extension.
> > On Oct 22, 2013 9:37 PM, "Raymond Camden" <ra...@gmail.com>
> wrote:
> >
> > > So dumb question - is it possible - and should it be documented - to
> run
> > > the build on Windows?
> > >
> > >
> > > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <
> raymondcamden@gmail.com
> > > >wrote:
> > >
> > > > I'm going to test it on a Windows VM I've got and see how well it
> > works.
> > > >
> > > >
> > > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com>
> > wrote:
> > > >
> > > >> Yes,
> > > >>
> > > >> merged in here:
> > > >>
> > > >>
> > >
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > > >>
> > > >>
> > > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > > raymondcamden@gmail.com
> > > >> >wrote:
> > > >>
> > > >> > I believe there was an issue with Windows - JRowny had a patch -
> was
> > > >> that
> > > >> > taken in?
> > > >> >
> > > >> >
> > > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com>
> > > wrote:
> > > >> >
> > > >> > > Hey everyone,
> > > >> > >
> > > >> > > I am feeling that the Cordova 3.0 support branch is stable
> enough
> > so
> > > >> I am
> > > >> > > merging it into develop.
> > > >> > >
> > > >> > > We are probably getting close to being able to ship the npm
> > package
> > > >> with
> > > >> > > cordova 3.0 support.
> > > >> > >
> > > >> > > I was just wondering what we need to do to prep for a true
> apache
> > > >> > release?
> > > >> > >
> > > >> > > I know there was some licensing issues with blackberries device
> > > skins.
> > > >> > >  Rather then figure out all that stuff I can just remove them so
> > it
> > > >> isn't
> > > >> > > an issue.  At some point in the future someone can crop some new
> > > skins
> > > >> > for
> > > >> > > all the devices anyways.
> > > >> > >
> > > >> > > Was it just the images that was holding up our releases?  I
> > wouldn't
> > > >> mind
> > > >> > > getting an official one out the door with Cordova 3.0 support.
> > > >> > >
> > > >> >
> > > >> >
> > > >> >
> > > >> > --
> > > >> >
> > > >>
> > >
> >
> ===========================================================================
> > > >> > Raymond Camden, Adobe Developer Evangelist
> > > >> >
> > > >> > Email : raymondcamden@gmail.com
> > > >> > Blog : www.raymondcamden.com
> > > >> > Twitter: cfjedimaster
> > > >> >
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > >
> > >
> >
> ===========================================================================
> > > > Raymond Camden, Adobe Developer Evangelist
> > > >
> > > > Email : raymondcamden@gmail.com
> > > > Blog : www.raymondcamden.com
> > > > Twitter: cfjedimaster
> > > >
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
Is configure/jake/etc still required? I did see your other email to me -
just wondering if there *is* special steps for Windows folks if it will be
documented.


On Tue, Oct 22, 2013 at 9:40 PM, JR <jr...@gmail.com> wrote:

> Since my pull was accepted hosted builds but not the extension.
> On Oct 22, 2013 9:37 PM, "Raymond Camden" <ra...@gmail.com> wrote:
>
> > So dumb question - is it possible - and should it be documented - to run
> > the build on Windows?
> >
> >
> > On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <raymondcamden@gmail.com
> > >wrote:
> >
> > > I'm going to test it on a Windows VM I've got and see how well it
> works.
> > >
> > >
> > > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com>
> wrote:
> > >
> > >> Yes,
> > >>
> > >> merged in here:
> > >>
> > >>
> >
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> > >>
> > >>
> > >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> > raymondcamden@gmail.com
> > >> >wrote:
> > >>
> > >> > I believe there was an issue with Windows - JRowny had a patch - was
> > >> that
> > >> > taken in?
> > >> >
> > >> >
> > >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com>
> > wrote:
> > >> >
> > >> > > Hey everyone,
> > >> > >
> > >> > > I am feeling that the Cordova 3.0 support branch is stable enough
> so
> > >> I am
> > >> > > merging it into develop.
> > >> > >
> > >> > > We are probably getting close to being able to ship the npm
> package
> > >> with
> > >> > > cordova 3.0 support.
> > >> > >
> > >> > > I was just wondering what we need to do to prep for a true apache
> > >> > release?
> > >> > >
> > >> > > I know there was some licensing issues with blackberries device
> > skins.
> > >> > >  Rather then figure out all that stuff I can just remove them so
> it
> > >> isn't
> > >> > > an issue.  At some point in the future someone can crop some new
> > skins
> > >> > for
> > >> > > all the devices anyways.
> > >> > >
> > >> > > Was it just the images that was holding up our releases?  I
> wouldn't
> > >> mind
> > >> > > getting an official one out the door with Cordova 3.0 support.
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >>
> >
> ===========================================================================
> > >> > Raymond Camden, Adobe Developer Evangelist
> > >> >
> > >> > Email : raymondcamden@gmail.com
> > >> > Blog : www.raymondcamden.com
> > >> > Twitter: cfjedimaster
> > >> >
> > >>
> > >
> > >
> > >
> > > --
> > >
> >
> ===========================================================================
> > > Raymond Camden, Adobe Developer Evangelist
> > >
> > > Email : raymondcamden@gmail.com
> > > Blog : www.raymondcamden.com
> > > Twitter: cfjedimaster
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by JR <jr...@gmail.com>.
Since my pull was accepted hosted builds but not the extension.
On Oct 22, 2013 9:37 PM, "Raymond Camden" <ra...@gmail.com> wrote:

> So dumb question - is it possible - and should it be documented - to run
> the build on Windows?
>
>
> On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > I'm going to test it on a Windows VM I've got and see how well it works.
> >
> >
> > On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com> wrote:
> >
> >> Yes,
> >>
> >> merged in here:
> >>
> >>
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
> >>
> >>
> >> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <
> raymondcamden@gmail.com
> >> >wrote:
> >>
> >> > I believe there was an issue with Windows - JRowny had a patch - was
> >> that
> >> > taken in?
> >> >
> >> >
> >> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com>
> wrote:
> >> >
> >> > > Hey everyone,
> >> > >
> >> > > I am feeling that the Cordova 3.0 support branch is stable enough so
> >> I am
> >> > > merging it into develop.
> >> > >
> >> > > We are probably getting close to being able to ship the npm package
> >> with
> >> > > cordova 3.0 support.
> >> > >
> >> > > I was just wondering what we need to do to prep for a true apache
> >> > release?
> >> > >
> >> > > I know there was some licensing issues with blackberries device
> skins.
> >> > >  Rather then figure out all that stuff I can just remove them so it
> >> isn't
> >> > > an issue.  At some point in the future someone can crop some new
> skins
> >> > for
> >> > > all the devices anyways.
> >> > >
> >> > > Was it just the images that was holding up our releases?  I wouldn't
> >> mind
> >> > > getting an official one out the door with Cordova 3.0 support.
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> >
> >>
> ===========================================================================
> >> > Raymond Camden, Adobe Developer Evangelist
> >> >
> >> > Email : raymondcamden@gmail.com
> >> > Blog : www.raymondcamden.com
> >> > Twitter: cfjedimaster
> >> >
> >>
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
So dumb question - is it possible - and should it be documented - to run
the build on Windows?


On Mon, Oct 21, 2013 at 5:34 AM, Raymond Camden <ra...@gmail.com>wrote:

> I'm going to test it on a Windows VM I've got and see how well it works.
>
>
> On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com> wrote:
>
>> Yes,
>>
>> merged in here:
>>
>> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
>>
>>
>> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <raymondcamden@gmail.com
>> >wrote:
>>
>> > I believe there was an issue with Windows - JRowny had a patch - was
>> that
>> > taken in?
>> >
>> >
>> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com> wrote:
>> >
>> > > Hey everyone,
>> > >
>> > > I am feeling that the Cordova 3.0 support branch is stable enough so
>> I am
>> > > merging it into develop.
>> > >
>> > > We are probably getting close to being able to ship the npm package
>> with
>> > > cordova 3.0 support.
>> > >
>> > > I was just wondering what we need to do to prep for a true apache
>> > release?
>> > >
>> > > I know there was some licensing issues with blackberries device skins.
>> > >  Rather then figure out all that stuff I can just remove them so it
>> isn't
>> > > an issue.  At some point in the future someone can crop some new skins
>> > for
>> > > all the devices anyways.
>> > >
>> > > Was it just the images that was holding up our releases?  I wouldn't
>> mind
>> > > getting an official one out the door with Cordova 3.0 support.
>> > >
>> >
>> >
>> >
>> > --
>> >
>> ===========================================================================
>> > Raymond Camden, Adobe Developer Evangelist
>> >
>> > Email : raymondcamden@gmail.com
>> > Blog : www.raymondcamden.com
>> > Twitter: cfjedimaster
>> >
>>
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
I'm going to test it on a Windows VM I've got and see how well it works.


On Sun, Oct 20, 2013 at 9:51 PM, Gord Tanner <gt...@gmail.com> wrote:

> Yes,
>
> merged in here:
>
> https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231
>
>
> On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <raymondcamden@gmail.com
> >wrote:
>
> > I believe there was an issue with Windows - JRowny had a patch - was that
> > taken in?
> >
> >
> > On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com> wrote:
> >
> > > Hey everyone,
> > >
> > > I am feeling that the Cordova 3.0 support branch is stable enough so I
> am
> > > merging it into develop.
> > >
> > > We are probably getting close to being able to ship the npm package
> with
> > > cordova 3.0 support.
> > >
> > > I was just wondering what we need to do to prep for a true apache
> > release?
> > >
> > > I know there was some licensing issues with blackberries device skins.
> > >  Rather then figure out all that stuff I can just remove them so it
> isn't
> > > an issue.  At some point in the future someone can crop some new skins
> > for
> > > all the devices anyways.
> > >
> > > Was it just the images that was holding up our releases?  I wouldn't
> mind
> > > getting an official one out the door with Cordova 3.0 support.
> > >
> >
> >
> >
> > --
> >
> ===========================================================================
> > Raymond Camden, Adobe Developer Evangelist
> >
> > Email : raymondcamden@gmail.com
> > Blog : www.raymondcamden.com
> > Twitter: cfjedimaster
> >
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Gord Tanner <gt...@gmail.com>.
Yes,

merged in here:
https://git-wip-us.apache.org/repos/asf?p=incubator-ripple.git;a=commitdiff;h=ff0deaddd1307b987883a1c90cf96ad3d407f231


On Sun, Oct 20, 2013 at 9:44 PM, Raymond Camden <ra...@gmail.com>wrote:

> I believe there was an issue with Windows - JRowny had a patch - was that
> taken in?
>
>
> On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com> wrote:
>
> > Hey everyone,
> >
> > I am feeling that the Cordova 3.0 support branch is stable enough so I am
> > merging it into develop.
> >
> > We are probably getting close to being able to ship the npm package with
> > cordova 3.0 support.
> >
> > I was just wondering what we need to do to prep for a true apache
> release?
> >
> > I know there was some licensing issues with blackberries device skins.
> >  Rather then figure out all that stuff I can just remove them so it isn't
> > an issue.  At some point in the future someone can crop some new skins
> for
> > all the devices anyways.
> >
> > Was it just the images that was holding up our releases?  I wouldn't mind
> > getting an official one out the door with Cordova 3.0 support.
> >
>
>
>
> --
> ===========================================================================
> Raymond Camden, Adobe Developer Evangelist
>
> Email : raymondcamden@gmail.com
> Blog : www.raymondcamden.com
> Twitter: cfjedimaster
>

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
I believe there was an issue with Windows - JRowny had a patch - was that
taken in?


On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com> wrote:

> Hey everyone,
>
> I am feeling that the Cordova 3.0 support branch is stable enough so I am
> merging it into develop.
>
> We are probably getting close to being able to ship the npm package with
> cordova 3.0 support.
>
> I was just wondering what we need to do to prep for a true apache release?
>
> I know there was some licensing issues with blackberries device skins.
>  Rather then figure out all that stuff I can just remove them so it isn't
> an issue.  At some point in the future someone can crop some new skins for
> all the devices anyways.
>
> Was it just the images that was holding up our releases?  I wouldn't mind
> getting an official one out the door with Cordova 3.0 support.
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster

Re: Cordova 3.0 support merging into develop

Posted by Raymond Camden <ra...@gmail.com>.
So hey - did this happen?


On Sun, Oct 20, 2013 at 8:38 PM, Gord Tanner <gt...@gmail.com> wrote:

> Hey everyone,
>
> I am feeling that the Cordova 3.0 support branch is stable enough so I am
> merging it into develop.
>
> We are probably getting close to being able to ship the npm package with
> cordova 3.0 support.
>
> I was just wondering what we need to do to prep for a true apache release?
>
> I know there was some licensing issues with blackberries device skins.
>  Rather then figure out all that stuff I can just remove them so it isn't
> an issue.  At some point in the future someone can crop some new skins for
> all the devices anyways.
>
> Was it just the images that was holding up our releases?  I wouldn't mind
> getting an official one out the door with Cordova 3.0 support.
>



-- 
===========================================================================
Raymond Camden, Adobe Developer Evangelist

Email : raymondcamden@gmail.com
Blog : www.raymondcamden.com
Twitter: cfjedimaster