You are viewing a plain text version of this content. The canonical link for it is here.
Posted to user@velocity.apache.org by "Herbert, Brent" <Br...@Thomson.co.uk> on 2002/01/31 18:26:23 UTC
flushing current output?
Is there any way to flush the currently loaded data out of a template, while
the rest of the template can be processed by the servlet?
For example, if you have a #foreach loop which works on, say, 10,000
elements, is there any way to push the output already available to the
user's browser while this is being processed?
This would be similar to a Perl $|=1; directive...
Thanks-
Brent
********** Confidentiality Notice & Disclaimer **********
This message, together with any attachments, is for the confidential and exclusive use of the addressee(s).
If you receive it in error, please delete the message and its attachments from your system immediately and notify us by return e-mail.
Do not disclose, copy, circulate or use any information contained in this e-mail.
(1) The content of this e-mail is to be read subject to Thomson Holidays terms of business, as applicable.
(2) E-mail may be intercepted or affected by viruses and Thomson Holidays accepts no responsibility for any interception or liability for any form of viruses introduced with this e-mail.
(3) The sender shall remain solely accountable for any statements, representations or opinions that are clearly his or her own and not made in the course of employment.
***************************************************************
Thomson Holidays Limited
Registered in England and Wales (Number 2830117)
Registered Office: Greater London House, Hampstead Road, London NW1 7SD
Telephone: +44 (0)20 7387 9321
Fax: +44 (0)20 7387 8451
IT Helpdesk: +44 (0)20 7383 1555
E-mail: Postmaster@Thomson.co.uk
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: flushing current output?
Posted by Bill Burton <bi...@progress.com>.
Hello,
"Herbert, Brent" wrote:
>
> Is there any way to flush the currently loaded data out of a template, while
> the rest of the template can be processed by the servlet?
>
> For example, if you have a #foreach loop which works on, say, 10,000
> elements, is there any way to push the output already available to the
> user's browser while this is being processed?
>
> This would be similar to a Perl $|=1; directive...
If your servlet extends VelocityServlet, "res" is put into the context as
the HttpServletResponse object for that request. Here are a couple of
things to try:
$res.Writer.flush or $res.getWriter().flush()
$res.flushBuffer
-Bill
> Thanks-
> Brent
>
> ********** Confidentiality Notice & Disclaimer **********
>
> This message, together with any attachments, is for the confidential and exclusive use of the addressee(s).
> If you receive it in error, please delete the message and its attachments from your system immediately and notify us by return e-mail.
> Do not disclose, copy, circulate or use any information contained in this e-mail.
>
> (1) The content of this e-mail is to be read subject to Thomson Holidays terms of business, as applicable.
> (2) E-mail may be intercepted or affected by viruses and Thomson Holidays accepts no responsibility for any interception or liability for any form of viruses introduced with this e-mail.
> (3) The sender shall remain solely accountable for any statements, representations or opinions that are clearly his or her own and not made in the course of employment.
>
> ***************************************************************
>
> Thomson Holidays Limited
> Registered in England and Wales (Number 2830117)
> Registered Office: Greater London House, Hampstead Road, London NW1 7SD
> Telephone: +44 (0)20 7387 9321
> Fax: +44 (0)20 7387 8451
> IT Helpdesk: +44 (0)20 7383 1555
> E-mail: Postmaster@Thomson.co.uk
>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: VelocityContext.putall()?
Posted by Normand Gagnon <ng...@newtradetech.com>.
I agree with you, in my webapplication I use a kind of cache of context
which represent a bunch of tools. So, depending on the requested URL, I get
from the cacheMap the correct toolset, but then I have to iterate in the
map to retrieve each tools and put each of them in the VelocityContext, a
putall(Map) method would be more "elegant".
At 05:31 PM 1/31/2002 -0500, you wrote:
>In my Web application, I have a number of methods that return HashMaps of
>key/value pairs that I then place into the VelocityContext and do
>Template.merge().
>
>I noticed the syntax VelocityContext.put() is like that of HashMap, and
>indeed (upon inspection) VelocityContext uses a HashMap internally for
>storage of values passed into VelocityContext.put().
>
>I intuitively sort of expected to be able to do a
>VelocityContext.putall(Map), instead of having to iterate over my HashMap
>and call VelocityContext.put() casting the keys to String as I go.
>
>Does anybody else think that VelocityContext.putall(Map) would be usefull?
>or is my use of it out of the ordinary?
>
>--
>Kevin Baynes
>
>
>PS-
>
>VelocityContext.putall would be defined in the Context interface (with put),
>so the subclasses would have to implement it. hassle?
>
>Also, I see that AbstractContext.put() and VelocityContext.internalPut()
>enforce that the key is a String. At some point the rendering engine has to
>pull out the key from HashMap and cast it to String, right? You could get a
>ClassCastException... trust the programmer or not?
>
>
>
>
>
>--
>To unsubscribe,
>e-mail: <ma...@jakarta.apache.org>
>For additional commands, e-mail:
><ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: flushing current output?
Posted by Corneil du Plessis <co...@mweb.co.za>.
What I know so far is that only the last #end causes the writes to occur and
then all my data goes into one file instead of many as intended. Once I
understand the inner workings of Velocity better I may be able to offer
something more solid.
Corneil du Plessis
(h) +27 (11) 918-1592
(w) +27 (82) 802-5768
-----Original Message-----
From: Geir Magnusson Jr. [mailto:geirm@optonline.net]
Sent: Thursday, January 31, 2002 9:43 PM
To: velocity-user@jakarta.apache.org
Subject: Re: flushing current output?
On 1/31/02 2:35 PM, "Corneil du Plessis" <co...@mweb.co.za> wrote:
> While trying to develop a toolbox utility to help with code generation in
> DVSL I discovered that the rendering is delayed and flushing the Writer
does
> not help because it nothing has been written yet. I am still investigating
> and trying to understand the internals of Velocity.
This really isn't true. Why do you say "rendering is delayed"?
Did my offered solution help?
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
"He who throws mud only loses ground." - Fat Albert
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: VelocityContext.putall()?
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
On 2/11/02 4:20 AM, "Kelvin Tan" <ke...@relevanz.com> wrote:
>
> ----- Original Message -----
> From: Kevin Baynes <kb...@seagullsw.com>
> To: Velocity Users List <ve...@jakarta.apache.org>
> Sent: Monday, February 04, 2002 11:59 PM
> Subject: RE: VelocityContext.putall()?
>
>
> [snip]
>> BTW -
>>
>> I was looking at the source code when I said I couldn't find the
>> constructor, I looked at VelocityContext and it's superclass
> AbstractContext
>> and couldn't find it. Here are the version ids:
>> @version $Id: VelocityContext.java,v 1.4 2001/03/19 22:32:49 geirm Exp $
>> @version $Id: AbstractContext.java,v 1.7 2001/08/30 20:58:27 dlr Exp $
>>
>> I have Velocity-1.2. Could something be out of sync?
>>
>>
>
> Glanced through the javadocs and source of Velocity-1.2 and couldn't find
> the constructor (which accepts a Map as argurment) Geir was talking about
> either...
>
> Is it in Velocity-1.2 or a more recent CVS build?
It's 1.3-dev. Current CVS HEAD.
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
The question is : What is a Mahnamahna?
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: VelocityContext.putall()?
Posted by Kelvin Tan <ke...@relevanz.com>.
----- Original Message -----
From: Kevin Baynes <kb...@seagullsw.com>
To: Velocity Users List <ve...@jakarta.apache.org>
Sent: Monday, February 04, 2002 11:59 PM
Subject: RE: VelocityContext.putall()?
[snip]
> BTW -
>
> I was looking at the source code when I said I couldn't find the
> constructor, I looked at VelocityContext and it's superclass
AbstractContext
> and couldn't find it. Here are the version ids:
> @version $Id: VelocityContext.java,v 1.4 2001/03/19 22:32:49 geirm Exp $
> @version $Id: AbstractContext.java,v 1.7 2001/08/30 20:58:27 dlr Exp $
>
> I have Velocity-1.2. Could something be out of sync?
>
>
Glanced through the javadocs and source of Velocity-1.2 and couldn't find
the constructor (which accepts a Map as argurment) Geir was talking about
either...
Is it in Velocity-1.2 or a more recent CVS build?
Regards,
Kelvin
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: VelocityContext.putall()?
Posted by Kevin Baynes <kb...@seagullsw.com>.
Thanks.
The more I thought about adding VelocityContext.putAll(Map), I eventually
came to the conclusion that it is just as easy to do
"VelocityContext.put("myMap",Map)" . I could then access the memebers using
dot notation ($myMap.loginid, etc.) [ if I felt strongly about doing the
iteration, but I don't :) ]
I think that VC.putAll(Map) would be elegant, but the reflection engine
pretty much obviates the need for it.
-Kevin
BTW -
I was looking at the source code when I said I couldn't find the
constructor, I looked at VelocityContext and it's superclass AbstractContext
and couldn't find it. Here are the version ids:
@version $Id: VelocityContext.java,v 1.4 2001/03/19 22:32:49 geirm Exp $
@version $Id: AbstractContext.java,v 1.7 2001/08/30 20:58:27 dlr Exp $
I have Velocity-1.2. Could something be out of sync?
> -----Original Message-----
> From: Geir Magnusson Jr. [mailto:geirm@optonline.net]
> Sent: Friday, February 01, 2002 2:50 PM
> To: velocity-user@jakarta.apache.org
> Subject: Re: VelocityContext.putall()?
>
>
> On 2/1/02 11:51 AM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
>
> >
> > Thanks for the response. :-)
> >
> > Sounds like your solution would work for me...
> >
> > I've looked for a constructor in VelocityContext.java that
> takes a Map for
> > storage, but cannot find it. I only found VelocityContext() and
> > VelocityContext(Context innerConext). I have velocity-1.2.
> >
> > Can you give me a more explicit instruction?
>
> My bad. The docs on the website are not up-to-date (they are 1.1, and not
> 1.2) and this is a 1.2 feature that daniel put in.
>
> Just generate the docs for yourself, or look at the class. It will be
> clear.
>
> For a hint :
>
> VelocityContext new = VelocityContext( myMap );
>
> :)
>
> >
> > Tx!
> >
> > -k
> >
> >
> >> -----Original Message-----
> >> From: Geir Magnusson Jr. [mailto:geirm@optonline.net]
> >> Sent: Thursday, January 31, 2002 6:27 PM
> >> To: velocity-user@jakarta.apache.org
> >> Subject: Re: VelocityContext.putall()?
> >>
> >>
> >> On 1/31/02 5:31 PM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
> >>
> >>>
> >>> In my Web application, I have a number of methods that return
> >> HashMaps of
> >>> key/value pairs that I then place into the VelocityContext and do
> >>> Template.merge().
> >>>
> >>> I noticed the syntax VelocityContext.put() is like that of
> HashMap, and
> >>> indeed (upon inspection) VelocityContext uses a HashMap internally for
> >>> storage of values passed into VelocityContext.put().
> >>>
> >>> I intuitively sort of expected to be able to do a
> >>> VelocityContext.putall(Map), instead of having to iterate over
> >> my HashMap
> >>> and call VelocityContext.put() casting the keys to String as I go.
> >>>
> >>> Does anybody else think that VelocityContext.putall(Map) would
> >> be usefull?
> >>> or is my use of it out of the ordinary?
> >>
> >> It's already there... There's a CTOR for VelocityContext that
> takes a Map,
> >> and actually uses that as the internal storage....
> >>
> >> That's a little different than a putAll(), but gets you most
> of the way :)
> >>
> >>>
> >>> --
> >>> Kevin Baynes
> >>>
> >>>
> >>> PS-
> >>>
> >>> VelocityContext.putall would be defined in the Context
> >> interface (with put),
> >>> so the subclasses would have to implement it. hassle?
> >>
> >> Yes - it doesn't make much sense to put on the Context inteface,
> >> I think...
> >>
> >>>
> >>> Also, I see that AbstractContext.put() and
> VelocityContext.internalPut()
> >>> enforce that the key is a String. At some point the rendering
> >> engine has to
> >>> pull out the key from HashMap and cast it to String, right?
> >>
> >> Not sure if that's the right way to think about it -
> generally, it looks
> >> into the HashMap with a String key when there's a reference
> that needs it.
> >>
> >> However, it is possible, I would imagine.
> >>
> >>
> >>> You could get a
> >>> ClassCastException... trust the programmer or not?
> >>
> >>
> >> --
> >> Geir Magnusson Jr.
> >> geirm@optonline.net
> >> System and Software Consulting
> >> "Whoever would overthrow the liberty of a nation must begin by
> >> subduing the
> >> freeness of speech." - Benjamin Franklin
> >>
> >>
> >>
> >> --
> >> To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
> >
> > --
> > To unsubscribe, e-mail:
> > <ma...@jakarta.apache.org>
> > For additional commands, e-mail:
> > <ma...@jakarta.apache.org>
> >
>
> --
> Geir Magnusson Jr. geirm@optonline.net
> System and Software Consulting
> POC lives!
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: VelocityContext.putall()?
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
On 2/1/02 11:51 AM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
>
> Thanks for the response. :-)
>
> Sounds like your solution would work for me...
>
> I've looked for a constructor in VelocityContext.java that takes a Map for
> storage, but cannot find it. I only found VelocityContext() and
> VelocityContext(Context innerConext). I have velocity-1.2.
>
> Can you give me a more explicit instruction?
My bad. The docs on the website are not up-to-date (they are 1.1, and not
1.2) and this is a 1.2 feature that daniel put in.
Just generate the docs for yourself, or look at the class. It will be
clear.
For a hint :
VelocityContext new = VelocityContext( myMap );
:)
>
> Tx!
>
> -k
>
>
>> -----Original Message-----
>> From: Geir Magnusson Jr. [mailto:geirm@optonline.net]
>> Sent: Thursday, January 31, 2002 6:27 PM
>> To: velocity-user@jakarta.apache.org
>> Subject: Re: VelocityContext.putall()?
>>
>>
>> On 1/31/02 5:31 PM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
>>
>>>
>>> In my Web application, I have a number of methods that return
>> HashMaps of
>>> key/value pairs that I then place into the VelocityContext and do
>>> Template.merge().
>>>
>>> I noticed the syntax VelocityContext.put() is like that of HashMap, and
>>> indeed (upon inspection) VelocityContext uses a HashMap internally for
>>> storage of values passed into VelocityContext.put().
>>>
>>> I intuitively sort of expected to be able to do a
>>> VelocityContext.putall(Map), instead of having to iterate over
>> my HashMap
>>> and call VelocityContext.put() casting the keys to String as I go.
>>>
>>> Does anybody else think that VelocityContext.putall(Map) would
>> be usefull?
>>> or is my use of it out of the ordinary?
>>
>> It's already there... There's a CTOR for VelocityContext that takes a Map,
>> and actually uses that as the internal storage....
>>
>> That's a little different than a putAll(), but gets you most of the way :)
>>
>>>
>>> --
>>> Kevin Baynes
>>>
>>>
>>> PS-
>>>
>>> VelocityContext.putall would be defined in the Context
>> interface (with put),
>>> so the subclasses would have to implement it. hassle?
>>
>> Yes - it doesn't make much sense to put on the Context inteface,
>> I think...
>>
>>>
>>> Also, I see that AbstractContext.put() and VelocityContext.internalPut()
>>> enforce that the key is a String. At some point the rendering
>> engine has to
>>> pull out the key from HashMap and cast it to String, right?
>>
>> Not sure if that's the right way to think about it - generally, it looks
>> into the HashMap with a String key when there's a reference that needs it.
>>
>> However, it is possible, I would imagine.
>>
>>
>>> You could get a
>>> ClassCastException... trust the programmer or not?
>>
>>
>> --
>> Geir Magnusson Jr.
>> geirm@optonline.net
>> System and Software Consulting
>> "Whoever would overthrow the liberty of a nation must begin by
>> subduing the
>> freeness of speech." - Benjamin Franklin
>>
>>
>>
>> --
>> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
POC lives!
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: VelocityContext.putall()?
Posted by Kevin Baynes <kb...@seagullsw.com>.
Thanks for the response. :-)
Sounds like your solution would work for me...
I've looked for a constructor in VelocityContext.java that takes a Map for
storage, but cannot find it. I only found VelocityContext() and
VelocityContext(Context innerConext). I have velocity-1.2.
Can you give me a more explicit instruction?
Tx!
-k
> -----Original Message-----
> From: Geir Magnusson Jr. [mailto:geirm@optonline.net]
> Sent: Thursday, January 31, 2002 6:27 PM
> To: velocity-user@jakarta.apache.org
> Subject: Re: VelocityContext.putall()?
>
>
> On 1/31/02 5:31 PM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
>
> >
> > In my Web application, I have a number of methods that return
> HashMaps of
> > key/value pairs that I then place into the VelocityContext and do
> > Template.merge().
> >
> > I noticed the syntax VelocityContext.put() is like that of HashMap, and
> > indeed (upon inspection) VelocityContext uses a HashMap internally for
> > storage of values passed into VelocityContext.put().
> >
> > I intuitively sort of expected to be able to do a
> > VelocityContext.putall(Map), instead of having to iterate over
> my HashMap
> > and call VelocityContext.put() casting the keys to String as I go.
> >
> > Does anybody else think that VelocityContext.putall(Map) would
> be usefull?
> > or is my use of it out of the ordinary?
>
> It's already there... There's a CTOR for VelocityContext that takes a Map,
> and actually uses that as the internal storage....
>
> That's a little different than a putAll(), but gets you most of the way :)
>
> >
> > --
> > Kevin Baynes
> >
> >
> > PS-
> >
> > VelocityContext.putall would be defined in the Context
> interface (with put),
> > so the subclasses would have to implement it. hassle?
>
> Yes - it doesn't make much sense to put on the Context inteface,
> I think...
>
> >
> > Also, I see that AbstractContext.put() and VelocityContext.internalPut()
> > enforce that the key is a String. At some point the rendering
> engine has to
> > pull out the key from HashMap and cast it to String, right?
>
> Not sure if that's the right way to think about it - generally, it looks
> into the HashMap with a String key when there's a reference that needs it.
>
> However, it is possible, I would imagine.
>
>
> > You could get a
> > ClassCastException... trust the programmer or not?
>
>
> --
> Geir Magnusson Jr.
> geirm@optonline.net
> System and Software Consulting
> "Whoever would overthrow the liberty of a nation must begin by
> subduing the
> freeness of speech." - Benjamin Franklin
>
>
>
> --
> To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: How to pass values dvsl->java?????
Posted by Brad Cox <bc...@virtualschool.edu>.
Nevermind, Geir. Found it. The methods were public but the class
was not. Sorry.
On Friday, February 1, 2002, at 02:48 PM, Geir Magnusson Jr. wrote:
> Are your methods public?
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: How to pass values dvsl->java?????
Posted by Brad Cox <bc...@virtualschool.edu>.
On Friday, February 1, 2002, at 02:48 PM, Geir Magnusson Jr. wrote:
> Are your methods public?
Absolutely.
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: How to pass values dvsl->java?????
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
Are your methods public?
On 2/1/02 1:17 PM, "Brad Cox" <bc...@virtualschool.edu> wrote:
> Geir, while waiting for your response I've tried passing an
> object to dvsl in the context with a method (addPage(String
> name, String value)) to save stuff as side effects.
>
> However the method isn't being recognized. In fact, none of my
> methods are recognized, just (presumably) those my class
> inherits from Object like getClass and toString().
>
> Here's the input. $cache is the object passed in the context.
> The fake(), fake1(), fake2() are methods I've added to help
> diagnose the problem, and addPage() is the real method.
>
> <pre>
> $cache
> $cache.getClass()
> $cache.toString()
> $cache.fake()
> $cache.fake1("foo")
> $cache.fake2("foo", "bar")
> $cache.addPage("foo", "bar")
> $cache.addPage($attrib.ident.toString(), $node.copy().toString())
> $cache.addPage($ident, $text)
> </pre>
>
> Here's the output. Note that getClass() and toString() are
> recognized, but none of my class-specific methods.
>
> <pre>
> edu.virtualschool.jcms.model.Task$PageCache@d115496
> class edu.virtualschool.jcms.model.Task$PageCache
> edu.virtualschool.jcms.model.Task$PageCache@d115496
> $cache.fake()
> $cache.fake1("foo")
> $cache.fake2("foo", "bar")
> $cache.addPage("foo", "bar")
> $cache.addPage($attrib.ident.toString(), $node.copy().toString())
> $cache.addPage($ident, $text)
> </pre>
>
> Roach motel. Data goes in but never come out. ;)
>
>
> --
> To unsubscribe, e-mail:
> <ma...@jakarta.apache.org>
> For additional commands, e-mail:
> <ma...@jakarta.apache.org>
>
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
"The J2EE Compatible brand has achieved significant momentum over the past
two years, and we want to make sure that any open source efforts don't
impact the viability of that effort. "
- Karen Tegan, Director of J2EE Compatibility and Platform Services
Sun Microsystems
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
How to pass values dvsl->java?????
Posted by Brad Cox <bc...@virtualschool.edu>.
Geir, while waiting for your response I've tried passing an
object to dvsl in the context with a method (addPage(String
name, String value)) to save stuff as side effects.
However the method isn't being recognized. In fact, none of my
methods are recognized, just (presumably) those my class
inherits from Object like getClass and toString().
Here's the input. $cache is the object passed in the context.
The fake(), fake1(), fake2() are methods I've added to help
diagnose the problem, and addPage() is the real method.
<pre>
$cache
$cache.getClass()
$cache.toString()
$cache.fake()
$cache.fake1("foo")
$cache.fake2("foo", "bar")
$cache.addPage("foo", "bar")
$cache.addPage($attrib.ident.toString(), $node.copy().toString())
$cache.addPage($ident, $text)
</pre>
Here's the output. Note that getClass() and toString() are
recognized, but none of my class-specific methods.
<pre>
edu.virtualschool.jcms.model.Task$PageCache@d115496
class edu.virtualschool.jcms.model.Task$PageCache
edu.virtualschool.jcms.model.Task$PageCache@d115496
$cache.fake()
$cache.fake1("foo")
$cache.fake2("foo", "bar")
$cache.addPage("foo", "bar")
$cache.addPage($attrib.ident.toString(), $node.copy().toString())
$cache.addPage($ident, $text)
</pre>
Roach motel. Data goes in but never come out. ;)
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: DVSL returns values in the context??
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
On 1/31/02 9:37 PM, "Brad Cox" <bc...@virtualschool.edu> wrote:
> Geir, I thought
>
> #set($foo = $something)
>
> in a dvsl script would store $foo in the incoming context. I was
> hoping to retrieve
> values on return as
>
> Object foo = context.get("foo");
>
> Apparently not; foo is null. What am I missing?
>
Well, 'foo', apparently.
(I crack myself up...)
The whole DVSL context thing is a little complicated. Not hard, just not
simple.
So what's happening is that I need to change it so that any 'puts' go into
the 'user context'.
There was some reasoning for the way it is, but I can't remember now. I'll
try and recall - if nothing but fuzzy thinking on my part, I'll fix....
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
"We will be judged not by the monuments we build, but by the monuments we
destroy" - Ada Louise Huxtable
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
DVSL returns values in the context??
Posted by Brad Cox <bc...@virtualschool.edu>.
Geir, I thought
#set($foo = $something)
in a dvsl script would store $foo in the incoming context. I was
hoping to retrieve
values on return as
Object foo = context.get("foo");
Apparently not; foo is null. What am I missing?
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: VelocityContext.putall()?
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
On 1/31/02 5:31 PM, "Kevin Baynes" <kb...@seagullsw.com> wrote:
>
> In my Web application, I have a number of methods that return HashMaps of
> key/value pairs that I then place into the VelocityContext and do
> Template.merge().
>
> I noticed the syntax VelocityContext.put() is like that of HashMap, and
> indeed (upon inspection) VelocityContext uses a HashMap internally for
> storage of values passed into VelocityContext.put().
>
> I intuitively sort of expected to be able to do a
> VelocityContext.putall(Map), instead of having to iterate over my HashMap
> and call VelocityContext.put() casting the keys to String as I go.
>
> Does anybody else think that VelocityContext.putall(Map) would be usefull?
> or is my use of it out of the ordinary?
It's already there... There's a CTOR for VelocityContext that takes a Map,
and actually uses that as the internal storage....
That's a little different than a putAll(), but gets you most of the way :)
>
> --
> Kevin Baynes
>
>
> PS-
>
> VelocityContext.putall would be defined in the Context interface (with put),
> so the subclasses would have to implement it. hassle?
Yes - it doesn't make much sense to put on the Context inteface, I think...
>
> Also, I see that AbstractContext.put() and VelocityContext.internalPut()
> enforce that the key is a String. At some point the rendering engine has to
> pull out the key from HashMap and cast it to String, right?
Not sure if that's the right way to think about it - generally, it looks
into the HashMap with a String key when there's a reference that needs it.
However, it is possible, I would imagine.
> You could get a
> ClassCastException... trust the programmer or not?
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
"Whoever would overthrow the liberty of a nation must begin by subduing the
freeness of speech." - Benjamin Franklin
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
VelocityContext.putall()?
Posted by Kevin Baynes <kb...@seagullsw.com>.
In my Web application, I have a number of methods that return HashMaps of
key/value pairs that I then place into the VelocityContext and do
Template.merge().
I noticed the syntax VelocityContext.put() is like that of HashMap, and
indeed (upon inspection) VelocityContext uses a HashMap internally for
storage of values passed into VelocityContext.put().
I intuitively sort of expected to be able to do a
VelocityContext.putall(Map), instead of having to iterate over my HashMap
and call VelocityContext.put() casting the keys to String as I go.
Does anybody else think that VelocityContext.putall(Map) would be usefull?
or is my use of it out of the ordinary?
--
Kevin Baynes
PS-
VelocityContext.putall would be defined in the Context interface (with put),
so the subclasses would have to implement it. hassle?
Also, I see that AbstractContext.put() and VelocityContext.internalPut()
enforce that the key is a String. At some point the rendering engine has to
pull out the key from HashMap and cast it to String, right? You could get a
ClassCastException... trust the programmer or not?
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
Re: flushing current output?
Posted by "Geir Magnusson Jr." <ge...@optonline.net>.
On 1/31/02 2:35 PM, "Corneil du Plessis" <co...@mweb.co.za> wrote:
> While trying to develop a toolbox utility to help with code generation in
> DVSL I discovered that the rendering is delayed and flushing the Writer does
> not help because it nothing has been written yet. I am still investigating
> and trying to understand the internals of Velocity.
This really isn't true. Why do you say "rendering is delayed"?
Did my offered solution help?
--
Geir Magnusson Jr. geirm@optonline.net
System and Software Consulting
"He who throws mud only loses ground." - Fat Albert
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>
RE: flushing current output?
Posted by Corneil du Plessis <co...@mweb.co.za>.
While trying to develop a toolbox utility to help with code generation in
DVSL I discovered that the rendering is delayed and flushing the Writer does
not help because it nothing has been written yet. I am still investigating
and trying to understand the internals of Velocity.
Corneil du Plessis
(h) +27 (11) 918-1592
(w) +27 (82) 802-5768
-----Original Message-----
From: Herbert, Brent [mailto:Brent_Herbert@Thomson.co.uk]
Sent: Thursday, January 31, 2002 7:26 PM
To: velocity-user@jakarta. apache. org (E-mail)
Subject: flushing current output?
Is there any way to flush the currently loaded data out of a template, while
the rest of the template can be processed by the servlet?
For example, if you have a #foreach loop which works on, say, 10,000
elements, is there any way to push the output already available to the
user's browser while this is being processed?
This would be similar to a Perl $|=1; directive...
Thanks-
Brent
********** Confidentiality Notice & Disclaimer **********
This message, together with any attachments, is for the confidential and
exclusive use of the addressee(s).
If you receive it in error, please delete the message and its attachments
from your system immediately and notify us by return e-mail.
Do not disclose, copy, circulate or use any information contained in this
e-mail.
(1) The content of this e-mail is to be read subject to Thomson Holidays
terms of business, as applicable.
(2) E-mail may be intercepted or affected by viruses and Thomson Holidays
accepts no responsibility for any interception or liability for any form of
viruses introduced with this e-mail.
(3) The sender shall remain solely accountable for any statements,
representations or opinions that are clearly his or her own and not made in
the course of employment.
***************************************************************
Thomson Holidays Limited
Registered in England and Wales (Number 2830117)
Registered Office: Greater London House, Hampstead Road, London NW1 7SD
Telephone: +44 (0)20 7387 9321
Fax: +44 (0)20 7387 8451
IT Helpdesk: +44 (0)20 7383 1555
E-mail: Postmaster@Thomson.co.uk
--
To unsubscribe, e-mail:
<ma...@jakarta.apache.org>
For additional commands, e-mail:
<ma...@jakarta.apache.org>
--
To unsubscribe, e-mail: <ma...@jakarta.apache.org>
For additional commands, e-mail: <ma...@jakarta.apache.org>